winrm 2.1.0 → 2.1.1

data/lib/winrm/wsmv/iso8601_duration.rb

@@ -1,60 +1,60 @@
-# encoding: UTF-8
-#
-# Copyright 2010 Dan Wanek <dan.wanek@gmail.com>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# rubocop:disable Metrics/MethodLength
-
-# Format an ISO8601 Duration
-module WinRM
-  module WSMV
-    # Converts seconds to ISO8601 duration format
-    module Iso8601Duration
-      # Convert the number of seconds to an ISO8601 duration format
-      # @see http://tools.ietf.org/html/rfc2445#section-4.3.6
-      # @param [Fixnum] seconds The amount of seconds for this duration
-      def self.sec_to_dur(seconds)
-        seconds = seconds.to_i
-        iso_str = 'P'
-        if seconds > 604_800 # more than a week
-          weeks = seconds / 604_800
-          seconds -= (604_800 * weeks)
-          iso_str << "#{weeks}W"
-        end
-        if seconds > 86_400 # more than a day
-          days = seconds / 86_400
-          seconds -= (86_400 * days)
-          iso_str << "#{days}D"
-        end
-        if seconds > 0
-          iso_str << 'T'
-          if seconds > 3600 # more than an hour
-            hours = seconds / 3600
-            seconds -= (3600 * hours)
-            iso_str << "#{hours}H"
-          end
-          if seconds > 60 # more than a minute
-            minutes = seconds / 60
-            seconds -= (60 * minutes)
-            iso_str << "#{minutes}M"
-          end
-          iso_str << "#{seconds}S"
-        end
-
-        iso_str
-      end
-    end
-  end
-end
-# rubocop:enable Metrics/MethodLength
+# encoding: UTF-8
+#
+# Copyright 2010 Dan Wanek <dan.wanek@gmail.com>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# rubocop:disable Metrics/MethodLength
+
+# Format an ISO8601 Duration
+module WinRM
+  module WSMV
+    # Converts seconds to ISO8601 duration format
+    module Iso8601Duration
+      # Convert the number of seconds to an ISO8601 duration format
+      # @see http://tools.ietf.org/html/rfc2445#section-4.3.6
+      # @param [Fixnum] seconds The amount of seconds for this duration
+      def self.sec_to_dur(seconds)
+        seconds = seconds.to_i
+        iso_str = 'P'
+        if seconds > 604_800 # more than a week
+          weeks = seconds / 604_800
+          seconds -= (604_800 * weeks)
+          iso_str << "#{weeks}W"
+        end
+        if seconds > 86_400 # more than a day
+          days = seconds / 86_400
+          seconds -= (86_400 * days)
+          iso_str << "#{days}D"
+        end
+        if seconds > 0
+          iso_str << 'T'
+          if seconds > 3600 # more than an hour
+            hours = seconds / 3600
+            seconds -= (3600 * hours)
+            iso_str << "#{hours}H"
+          end
+          if seconds > 60 # more than a minute
+            minutes = seconds / 60
+            seconds -= (60 * minutes)
+            iso_str << "#{minutes}M"
+          end
+          iso_str << "#{seconds}S"
+        end
+
+        iso_str
+      end
+    end
+  end
+end
+# rubocop:enable Metrics/MethodLength

data/lib/winrm/wsmv/keep_alive.rb

@@ -1,68 +1,68 @@
-# -*- encoding: utf-8 -*-
-#
-# Copyright 2016 Matt Wrock <matt@mattwrock.com>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-require_relative 'base'
-
-module WinRM
-  module WSMV
-    # WSMV keep alive message
-    class KeepAlive < Base
-      attr_accessor :shell_id
-
-      def initialize(session_opts, shell_id)
-        @session_opts = session_opts
-        @shell_id = shell_id
-      end
-
-      protected
-
-      def create_header(header)
-        header << Gyoku.xml(keep_alive_headers)
-      end
-
-      def create_body(body)
-        body.tag!("#{NS_WIN_SHELL}:Receive") { |s| s << Gyoku.xml(keep_alive_body) }
-      end
-
-      private
-
-      def keep_alive_body
-        { "#{NS_WIN_SHELL}:DesiredStream" => 'stdout' }
-      end
-
-      def keep_alive_headers
-        merge_headers(shared_headers(@session_opts),
-                      resource_uri_shell(RESOURCE_URI_POWERSHELL),
-                      action_receive,
-                      header_opts,
-                      selector_shell_id(shell_id))
-      end
-
-      def header_opts
-        {
-          "#{NS_WSMAN_DMTF}:OptionSet" => {
-            "#{NS_WSMAN_DMTF}:Option" => 'TRUE',
-            :attributes! => {
-              "#{NS_WSMAN_DMTF}:Option" => {
-                'Name' => 'WSMAN_CMDSHELL_OPTION_KEEPALIVE'
-              }
-            }
-          }
-        }
-      end
-    end
-  end
-end
+# -*- encoding: utf-8 -*-
+#
+# Copyright 2016 Matt Wrock <matt@mattwrock.com>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+require_relative 'base'
+
+module WinRM
+  module WSMV
+    # WSMV keep alive message
+    class KeepAlive < Base
+      attr_accessor :shell_id
+
+      def initialize(session_opts, shell_id)
+        @session_opts = session_opts
+        @shell_id = shell_id
+      end
+
+      protected
+
+      def create_header(header)
+        header << Gyoku.xml(keep_alive_headers)
+      end
+
+      def create_body(body)
+        body.tag!("#{NS_WIN_SHELL}:Receive") { |s| s << Gyoku.xml(keep_alive_body) }
+      end
+
+      private
+
+      def keep_alive_body
+        { "#{NS_WIN_SHELL}:DesiredStream" => 'stdout' }
+      end
+
+      def keep_alive_headers
+        merge_headers(shared_headers(@session_opts),
+                      resource_uri_shell(RESOURCE_URI_POWERSHELL),
+                      action_receive,
+                      header_opts,
+                      selector_shell_id(shell_id))
+      end
+
+      def header_opts
+        {
+          "#{NS_WSMAN_DMTF}:OptionSet" => {
+            "#{NS_WSMAN_DMTF}:Option" => 'TRUE',
+            :attributes! => {
+              "#{NS_WSMAN_DMTF}:Option" => {
+                'Name' => 'WSMAN_CMDSHELL_OPTION_KEEPALIVE'
+              }
+            }
+          }
+        }
+      end
+    end
+  end
+end

data/lib/winrm/wsmv/receive_response_reader.rb

@@ -1,126 +1,126 @@
-# -*- encoding: utf-8 -*-
-#
-# Copyright 2016 Shawn Neal <sneal@sneal.net>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-require_relative 'soap'
-require_relative 'header'
-require_relative 'command_output_decoder'
-require_relative '../output'
-
-module WinRM
-  module WSMV
-    # Class for reading wsmv Receive_Response messages
-    class ReceiveResponseReader
-      include WinRM::WSMV::SOAP
-      include WinRM::WSMV::Header
-
-      # Creates a new ReceiveResponseReader
-      # @param transport [HttpTransport] The WinRM SOAP transport
-      # @param logger [Logger] The logger to log diagnostic messages to
-      def initialize(transport, logger)
-        @transport = transport
-        @logger = logger
-        @output_decoder = CommandOutputDecoder.new
-      end
-
-      attr_reader :logger
-
-      # Reads streams and returns decoded output
-      # @param wsmv_message [WinRM::WSMV::Base] A wsmv message to send to endpoint
-      # @yieldparam [string] standard out response text
-      # @yieldparam [string] standard error response text
-      # @yieldreturn [WinRM::Output] The command output
-      def read_output(wsmv_message)
-        with_output do |output|
-          read_response(wsmv_message, true) do |stream, doc|
-            handled_out = handle_stream(stream, output, doc)
-            yield handled_out if handled_out && block_given?
-          end
-        end
-      end
-
-      # Reads streams sent in one or more receive response messages
-      # @param wsmv_message [WinRM::WSMV::Base] A wsmv message to send to endpoint
-      # @param wait_for_done_state whether to poll for a CommandState of Done
-      # @yieldparam [Hash] Hash representation of stream with type and text
-      # @yieldparam [REXML::Document] Complete SOAP envelope returned to wsmv_message
-      def read_response(wsmv_message, wait_for_done_state = false)
-        resp_doc = nil
-        until command_done?(resp_doc, wait_for_done_state)
-          logger.debug('[WinRM] Waiting for output...')
-          resp_doc = send_get_output_message(wsmv_message.build)
-          logger.debug('[WinRM] Processing output')
-          read_streams(resp_doc) do |stream|
-            yield stream, resp_doc
-          end
-        end
-      end
-
-      protected
-
-      def with_output
-        output = WinRM::Output.new
-        yield output
-        output.exitcode ||= 0
-        output
-      end
-
-      private
-
-      def handle_stream(stream, output, resp_doc)
-        decoded_text = @output_decoder.decode(stream[:text])
-        return unless decoded_text
-
-        out = { stream[:type] => decoded_text }
-        output << out
-        if (code = REXML::XPath.first(resp_doc, "//#{NS_WIN_SHELL}:ExitCode"))
-          output.exitcode = code.text.to_i
-        end
-        [out[:stdout], out[:stderr]]
-      end
-
-      def send_get_output_message(message)
-        @transport.send_request(message)
-      rescue WinRMWSManFault => e
-        # If no output is available before the wsman:OperationTimeout expires,
-        # the server MUST return a WSManFault with the Code attribute equal to
-        # 2150858793. When the client receives this fault, it SHOULD issue
-        # another Receive request.
-        # http://msdn.microsoft.com/en-us/library/cc251676.aspx
-        raise unless e.fault_code == '2150858793'
-
-        logger.debug('[WinRM] retrying receive request after timeout')
-        retry
-      end
-
-      def command_done?(resp_doc, wait_for_done_state)
-        return false unless resp_doc
-        return true unless wait_for_done_state
-
-        REXML::XPath.match(
-          resp_doc,
-          "//*[@State='http://schemas.microsoft.com/wbem/wsman/1/windows/shell/" \
-          "CommandState/Done']").any?
-      end
-
-      def read_streams(response_document)
-        REXML::XPath.match(response_document, "//#{NS_WIN_SHELL}:Stream").each do |stream|
-          next if stream.text.nil? || stream.text.empty?
-          yield type: stream.attributes['Name'].to_sym, text: stream.text
-        end
-      end
-    end
-  end
-end
+# -*- encoding: utf-8 -*-
+#
+# Copyright 2016 Shawn Neal <sneal@sneal.net>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+require_relative 'soap'
+require_relative 'header'
+require_relative 'command_output_decoder'
+require_relative '../output'
+
+module WinRM
+  module WSMV
+    # Class for reading wsmv Receive_Response messages
+    class ReceiveResponseReader
+      include WinRM::WSMV::SOAP
+      include WinRM::WSMV::Header
+
+      # Creates a new ReceiveResponseReader
+      # @param transport [HttpTransport] The WinRM SOAP transport
+      # @param logger [Logger] The logger to log diagnostic messages to
+      def initialize(transport, logger)
+        @transport = transport
+        @logger = logger
+        @output_decoder = CommandOutputDecoder.new
+      end
+
+      attr_reader :logger
+
+      # Reads streams and returns decoded output
+      # @param wsmv_message [WinRM::WSMV::Base] A wsmv message to send to endpoint
+      # @yieldparam [string] standard out response text
+      # @yieldparam [string] standard error response text
+      # @yieldreturn [WinRM::Output] The command output
+      def read_output(wsmv_message)
+        with_output do |output|
+          read_response(wsmv_message, true) do |stream, doc|
+            handled_out = handle_stream(stream, output, doc)
+            yield handled_out if handled_out && block_given?
+          end
+        end
+      end
+
+      # Reads streams sent in one or more receive response messages
+      # @param wsmv_message [WinRM::WSMV::Base] A wsmv message to send to endpoint
+      # @param wait_for_done_state whether to poll for a CommandState of Done
+      # @yieldparam [Hash] Hash representation of stream with type and text
+      # @yieldparam [REXML::Document] Complete SOAP envelope returned to wsmv_message
+      def read_response(wsmv_message, wait_for_done_state = false)
+        resp_doc = nil
+        until command_done?(resp_doc, wait_for_done_state)
+          logger.debug('[WinRM] Waiting for output...')
+          resp_doc = send_get_output_message(wsmv_message.build)
+          logger.debug('[WinRM] Processing output')
+          read_streams(resp_doc) do |stream|
+            yield stream, resp_doc
+          end
+        end
+      end
+
+      protected
+
+      def with_output
+        output = WinRM::Output.new
+        yield output
+        output.exitcode ||= 0
+        output
+      end
+
+      private
+
+      def handle_stream(stream, output, resp_doc)
+        decoded_text = @output_decoder.decode(stream[:text])
+        return unless decoded_text
+
+        out = { stream[:type] => decoded_text }
+        output << out
+        if (code = REXML::XPath.first(resp_doc, "//#{NS_WIN_SHELL}:ExitCode"))
+          output.exitcode = code.text.to_i
+        end
+        [out[:stdout], out[:stderr]]
+      end
+
+      def send_get_output_message(message)
+        @transport.send_request(message)
+      rescue WinRMWSManFault => e
+        # If no output is available before the wsman:OperationTimeout expires,
+        # the server MUST return a WSManFault with the Code attribute equal to
+        # 2150858793. When the client receives this fault, it SHOULD issue
+        # another Receive request.
+        # http://msdn.microsoft.com/en-us/library/cc251676.aspx
+        raise unless e.fault_code == '2150858793'
+
+        logger.debug('[WinRM] retrying receive request after timeout')
+        retry
+      end
+
+      def command_done?(resp_doc, wait_for_done_state)
+        return false unless resp_doc
+        return true unless wait_for_done_state
+
+        REXML::XPath.match(
+          resp_doc,
+          "//*[@State='http://schemas.microsoft.com/wbem/wsman/1/windows/shell/" \
+          "CommandState/Done']").any?
+      end
+
+      def read_streams(response_document)
+        REXML::XPath.match(response_document, "//#{NS_WIN_SHELL}:Stream").each do |stream|
+          next if stream.text.nil? || stream.text.empty?
+          yield type: stream.attributes['Name'].to_sym, text: stream.text
+        end
+      end
+    end
+  end
+end