webroar 0.2.2

data/src/admin_panel/vendor/rails/activerecord/lib/active_record/base.rb

@@ -0,0 +1,3155 @@
+require 'yaml'
+require 'set'
+
+module ActiveRecord #:nodoc:
+  # Generic Active Record exception class.
+  class ActiveRecordError < StandardError
+  end
+
+  # Raised when the single-table inheritance mechanism fails to locate the subclass
+  # (for example due to improper usage of column that +inheritance_column+ points to).
+  class SubclassNotFound < ActiveRecordError #:nodoc:
+  end
+
+  # Raised when an object assigned to an association has an incorrect type.
+  #
+  #   class Ticket < ActiveRecord::Base
+  #     has_many :patches
+  #   end
+  #
+  #   class Patch < ActiveRecord::Base
+  #     belongs_to :ticket
+  #   end
+  #
+  #   # Comments are not patches, this assignment raises AssociationTypeMismatch.
+  #   @ticket.patches << Comment.new(:content => "Please attach tests to your patch.")
+  class AssociationTypeMismatch < ActiveRecordError
+  end
+
+  # Raised when unserialized object's type mismatches one specified for serializable field.
+  class SerializationTypeMismatch < ActiveRecordError
+  end
+
+  # Raised when adapter not specified on connection (or configuration file <tt>config/database.yml</tt> misses adapter field).
+  class AdapterNotSpecified < ActiveRecordError
+  end
+
+  # Raised when Active Record cannot find database adapter specified in <tt>config/database.yml</tt> or programmatically.
+  class AdapterNotFound < ActiveRecordError
+  end
+
+  # Raised when connection to the database could not been established (for example when <tt>connection=</tt> is given a nil object).
+  class ConnectionNotEstablished < ActiveRecordError
+  end
+
+  # Raised when Active Record cannot find record by given id or set of ids.
+  class RecordNotFound < ActiveRecordError
+  end
+
+  # Raised by ActiveRecord::Base.save! and ActiveRecord::Base.create! methods when record cannot be
+  # saved because record is invalid.
+  class RecordNotSaved < ActiveRecordError
+  end
+
+  # Raised when SQL statement cannot be executed by the database (for example, it's often the case for MySQL when Ruby driver used is too old).
+  class StatementInvalid < ActiveRecordError
+  end
+
+  # Raised when number of bind variables in statement given to <tt>:condition</tt> key (for example, when using +find+ method)
+  # does not match number of expected variables.
+  #
+  # For example, in
+  #
+  #   Location.find :all, :conditions => ["lat = ? AND lng = ?", 53.7362]
+  #
+  # two placeholders are given but only one variable to fill them.
+  class PreparedStatementInvalid < ActiveRecordError
+  end
+
+  # Raised on attempt to save stale record. Record is stale when it's being saved in another query after
+  # instantiation, for example, when two users edit the same wiki page and one starts editing and saves
+  # the page before the other.
+  #
+  # Read more about optimistic locking in ActiveRecord::Locking module RDoc.
+  class StaleObjectError < ActiveRecordError
+  end
+
+  # Raised when association is being configured improperly or
+  # user tries to use offset and limit together with has_many or has_and_belongs_to_many associations.
+  class ConfigurationError < ActiveRecordError
+  end
+
+  # Raised on attempt to update record that is instantiated as read only.
+  class ReadOnlyRecord < ActiveRecordError
+  end
+
+  # ActiveRecord::Transactions::ClassMethods.transaction uses this exception
+  # to distinguish a deliberate rollback from other exceptional situations.
+  # Normally, raising an exception will cause the +transaction+ method to rollback
+  # the database transaction *and* pass on the exception. But if you raise an
+  # ActiveRecord::Rollback exception, then the database transaction will be rolled back,
+  # without passing on the exception.
+  #
+  # For example, you could do this in your controller to rollback a transaction:
+  #
+  #   class BooksController < ActionController::Base
+  #     def create
+  #       Book.transaction do
+  #         book = Book.new(params[:book])
+  #         book.save!
+  #         if today_is_friday?
+  #           # The system must fail on Friday so that our support department
+  #           # won't be out of job. We silently rollback this transaction
+  #           # without telling the user.
+  #           raise ActiveRecord::Rollback, "Call tech support!"
+  #         end
+  #       end
+  #       # ActiveRecord::Rollback is the only exception that won't be passed on
+  #       # by ActiveRecord::Base.transaction, so this line will still be reached
+  #       # even on Friday.
+  #       redirect_to root_url
+  #     end
+  #   end
+  class Rollback < ActiveRecordError
+  end
+
+  # Raised when attribute has a name reserved by Active Record (when attribute has name of one of Active Record instance methods).
+  class DangerousAttributeError < ActiveRecordError
+  end
+
+  # Raised when you've tried to access a column which wasn't loaded by your finder.
+  # Typically this is because <tt>:select</tt> has been specified.
+  class MissingAttributeError < NoMethodError
+  end
+
+  # Raised when unknown attributes are supplied via mass assignment.
+  class UnknownAttributeError < NoMethodError
+  end
+
+  # Raised when an error occurred while doing a mass assignment to an attribute through the
+  # <tt>attributes=</tt> method. The exception has an +attribute+ property that is the name of the
+  # offending attribute.
+  class AttributeAssignmentError < ActiveRecordError
+    attr_reader :exception, :attribute
+    def initialize(message, exception, attribute)
+      @exception = exception
+      @attribute = attribute
+      @message = message
+    end
+  end
+
+  # Raised when there are multiple errors while doing a mass assignment through the +attributes+
+  # method. The exception has an +errors+ property that contains an array of AttributeAssignmentError
+  # objects, each corresponding to the error while assigning to an attribute.
+  class MultiparameterAssignmentErrors < ActiveRecordError
+    attr_reader :errors
+    def initialize(errors)
+      @errors = errors
+    end
+  end
+
+  # Active Record objects don't specify their attributes directly, but rather infer them from the table definition with
+  # which they're linked. Adding, removing, and changing attributes and their type is done directly in the database. Any change
+  # is instantly reflected in the Active Record objects. The mapping that binds a given Active Record class to a certain
+  # database table will happen automatically in most common cases, but can be overwritten for the uncommon ones.
+  #
+  # See the mapping rules in table_name and the full example in link:files/README.html for more insight.
+  #
+  # == Creation
+  #
+  # Active Records accept constructor parameters either in a hash or as a block. The hash method is especially useful when
+  # you're receiving the data from somewhere else, like an HTTP request. It works like this:
+  #
+  #   user = User.new(:name => "David", :occupation => "Code Artist")
+  #   user.name # => "David"
+  #
+  # You can also use block initialization:
+  #
+  #   user = User.new do |u|
+  #     u.name = "David"
+  #     u.occupation = "Code Artist"
+  #   end
+  #
+  # And of course you can just create a bare object and specify the attributes after the fact:
+  #
+  #   user = User.new
+  #   user.name = "David"
+  #   user.occupation = "Code Artist"
+  #
+  # == Conditions
+  #
+  # Conditions can either be specified as a string, array, or hash representing the WHERE-part of an SQL statement.
+  # The array form is to be used when the condition input is tainted and requires sanitization. The string form can
+  # be used for statements that don't involve tainted data. The hash form works much like the array form, except
+  # only equality and range is possible. Examples:
+  #
+  #   class User < ActiveRecord::Base
+  #     def self.authenticate_unsafely(user_name, password)
+  #       find(:first, :conditions => "user_name = '#{user_name}' AND password = '#{password}'")
+  #     end
+  #
+  #     def self.authenticate_safely(user_name, password)
+  #       find(:first, :conditions => [ "user_name = ? AND password = ?", user_name, password ])
+  #     end
+  #
+  #     def self.authenticate_safely_simply(user_name, password)
+  #       find(:first, :conditions => { :user_name => user_name, :password => password })
+  #     end
+  #   end
+  #
+  # The <tt>authenticate_unsafely</tt> method inserts the parameters directly into the query and is thus susceptible to SQL-injection
+  # attacks if the <tt>user_name</tt> and +password+ parameters come directly from an HTTP request. The <tt>authenticate_safely</tt>  and
+  # <tt>authenticate_safely_simply</tt> both will sanitize the <tt>user_name</tt> and +password+ before inserting them in the query,
+  # which will ensure that an attacker can't escape the query and fake the login (or worse).
+  #
+  # When using multiple parameters in the conditions, it can easily become hard to read exactly what the fourth or fifth
+  # question mark is supposed to represent. In those cases, you can resort to named bind variables instead. That's done by replacing
+  # the question marks with symbols and supplying a hash with values for the matching symbol keys:
+  #
+  #   Company.find(:first, :conditions => [
+  #     "id = :id AND name = :name AND division = :division AND created_at > :accounting_date",
+  #     { :id => 3, :name => "37signals", :division => "First", :accounting_date => '2005-01-01' }
+  #   ])
+  #
+  # Similarly, a simple hash without a statement will generate conditions based on equality with the SQL AND
+  # operator. For instance:
+  #
+  #   Student.find(:all, :conditions => { :first_name => "Harvey", :status => 1 })
+  #   Student.find(:all, :conditions => params[:student])
+  #
+  # A range may be used in the hash to use the SQL BETWEEN operator:
+  #
+  #   Student.find(:all, :conditions => { :grade => 9..12 })
+  #
+  # An array may be used in the hash to use the SQL IN operator:
+  #
+  #   Student.find(:all, :conditions => { :grade => [9,11,12] })
+  #
+  # == Overwriting default accessors
+  #
+  # All column values are automatically available through basic accessors on the Active Record object, but sometimes you
+  # want to specialize this behavior. This can be done by overwriting the default accessors (using the same
+  # name as the attribute) and calling <tt>read_attribute(attr_name)</tt> and <tt>write_attribute(attr_name, value)</tt> to actually change things.
+  # Example:
+  #
+  #   class Song < ActiveRecord::Base
+  #     # Uses an integer of seconds to hold the length of the song
+  #
+  #     def length=(minutes)
+  #       write_attribute(:length, minutes.to_i * 60)
+  #     end
+  #
+  #     def length
+  #       read_attribute(:length) / 60
+  #     end
+  #   end
+  #
+  # You can alternatively use <tt>self[:attribute]=(value)</tt> and <tt>self[:attribute]</tt> instead of <tt>write_attribute(:attribute, value)</tt> and
+  # <tt>read_attribute(:attribute)</tt> as a shorter form.
+  #
+  # == Attribute query methods
+  #
+  # In addition to the basic accessors, query methods are also automatically available on the Active Record object.
+  # Query methods allow you to test whether an attribute value is present.
+  #
+  # For example, an Active Record User with the <tt>name</tt> attribute has a <tt>name?</tt> method that you can call
+  # to determine whether the user has a name:
+  #
+  #   user = User.new(:name => "David")
+  #   user.name? # => true
+  #
+  #   anonymous = User.new(:name => "")
+  #   anonymous.name? # => false
+  #
+  # == Accessing attributes before they have been typecasted
+  #
+  # Sometimes you want to be able to read the raw attribute data without having the column-determined typecast run its course first.
+  # That can be done by using the <tt><attribute>_before_type_cast</tt> accessors that all attributes have. For example, if your Account model
+  # has a <tt>balance</tt> attribute, you can call <tt>account.balance_before_type_cast</tt> or <tt>account.id_before_type_cast</tt>.
+  #
+  # This is especially useful in validation situations where the user might supply a string for an integer field and you want to display
+  # the original string back in an error message. Accessing the attribute normally would typecast the string to 0, which isn't what you
+  # want.
+  #
+  # == Dynamic attribute-based finders
+  #
+  # Dynamic attribute-based finders are a cleaner way of getting (and/or creating) objects by simple queries without turning to SQL. They work by
+  # appending the name of an attribute to <tt>find_by_</tt>, <tt>find_last_by_</tt>, or <tt>find_all_by_</tt>, so you get finders like <tt>Person.find_by_user_name</tt>,
+  # <tt>Person.find_all_by_last_name</tt>, and <tt>Payment.find_by_transaction_id</tt>. So instead of writing
+  # <tt>Person.find(:first, :conditions => ["user_name = ?", user_name])</tt>, you just do <tt>Person.find_by_user_name(user_name)</tt>.
+  # And instead of writing <tt>Person.find(:all, :conditions => ["last_name = ?", last_name])</tt>, you just do <tt>Person.find_all_by_last_name(last_name)</tt>.
+  #
+  # It's also possible to use multiple attributes in the same find by separating them with "_and_", so you get finders like
+  # <tt>Person.find_by_user_name_and_password</tt> or even <tt>Payment.find_by_purchaser_and_state_and_country</tt>. So instead of writing
+  # <tt>Person.find(:first, :conditions => ["user_name = ? AND password = ?", user_name, password])</tt>, you just do
+  # <tt>Person.find_by_user_name_and_password(user_name, password)</tt>.
+  #
+  # It's even possible to use all the additional parameters to find. For example, the full interface for <tt>Payment.find_all_by_amount</tt>
+  # is actually <tt>Payment.find_all_by_amount(amount, options)</tt>. And the full interface to <tt>Person.find_by_user_name</tt> is
+  # actually <tt>Person.find_by_user_name(user_name, options)</tt>. So you could call <tt>Payment.find_all_by_amount(50, :order => "created_on")</tt>.
+  # Also you may call <tt>Payment.find_last_by_amount(amount, options)</tt> returning the last record matching that amount and options.
+  #
+  # The same dynamic finder style can be used to create the object if it doesn't already exist. This dynamic finder is called with
+  # <tt>find_or_create_by_</tt> and will return the object if it already exists and otherwise creates it, then returns it. Protected attributes won't be set unless they are given in a block. For example:
+  #
+  #   # No 'Summer' tag exists
+  #   Tag.find_or_create_by_name("Summer") # equal to Tag.create(:name => "Summer")
+  #
+  #   # Now the 'Summer' tag does exist
+  #   Tag.find_or_create_by_name("Summer") # equal to Tag.find_by_name("Summer")
+  #
+  #   # Now 'Bob' exist and is an 'admin'
+  #   User.find_or_create_by_name('Bob', :age => 40) { |u| u.admin = true }
+  #
+  # Use the <tt>find_or_initialize_by_</tt> finder if you want to return a new record without saving it first. Protected attributes won't be set unless they are given in a block. For example:
+  #
+  #   # No 'Winter' tag exists
+  #   winter = Tag.find_or_initialize_by_name("Winter")
+  #   winter.new_record? # true
+  #
+  # To find by a subset of the attributes to be used for instantiating a new object, pass a hash instead of
+  # a list of parameters. For example:
+  #
+  #   Tag.find_or_create_by_name(:name => "rails", :creator => current_user)
+  #
+  # That will either find an existing tag named "rails", or create a new one while setting the user that created it.
+  #
+  # == Saving arrays, hashes, and other non-mappable objects in text columns
+  #
+  # Active Record can serialize any object in text columns using YAML. To do so, you must specify this with a call to the class method +serialize+.
+  # This makes it possible to store arrays, hashes, and other non-mappable objects without doing any additional work. Example:
+  #
+  #   class User < ActiveRecord::Base
+  #     serialize :preferences
+  #   end
+  #
+  #   user = User.create(:preferences => { "background" => "black", "display" => large })
+  #   User.find(user.id).preferences # => { "background" => "black", "display" => large }
+  #
+  # You can also specify a class option as the second parameter that'll raise an exception if a serialized object is retrieved as a
+  # descendant of a class not in the hierarchy. Example:
+  #
+  #   class User < ActiveRecord::Base
+  #     serialize :preferences, Hash
+  #   end
+  #
+  #   user = User.create(:preferences => %w( one two three ))
+  #   User.find(user.id).preferences    # raises SerializationTypeMismatch
+  #
+  # == Single table inheritance
+  #
+  # Active Record allows inheritance by storing the name of the class in a column that by default is named "type" (can be changed
+  # by overwriting <tt>Base.inheritance_column</tt>). This means that an inheritance looking like this:
+  #
+  #   class Company < ActiveRecord::Base; end
+  #   class Firm < Company; end
+  #   class Client < Company; end
+  #   class PriorityClient < Client; end
+  #
+  # When you do <tt>Firm.create(:name => "37signals")</tt>, this record will be saved in the companies table with type = "Firm". You can then
+  # fetch this row again using <tt>Company.find(:first, "name = '37signals'")</tt> and it will return a Firm object.
+  #
+  # If you don't have a type column defined in your table, single-table inheritance won't be triggered. In that case, it'll work just
+  # like normal subclasses with no special magic for differentiating between them or reloading the right type with find.
+  #
+  # Note, all the attributes for all the cases are kept in the same table. Read more:
+  # http://www.martinfowler.com/eaaCatalog/singleTableInheritance.html
+  #
+  # == Connection to multiple databases in different models
+  #
+  # Connections are usually created through ActiveRecord::Base.establish_connection and retrieved by ActiveRecord::Base.connection.
+  # All classes inheriting from ActiveRecord::Base will use this connection. But you can also set a class-specific connection.
+  # For example, if Course is an ActiveRecord::Base, but resides in a different database, you can just say <tt>Course.establish_connection</tt>
+  # and Course and all of its subclasses will use this connection instead.
+  #
+  # This feature is implemented by keeping a connection pool in ActiveRecord::Base that is a Hash indexed by the class. If a connection is
+  # requested, the retrieve_connection method will go up the class-hierarchy until a connection is found in the connection pool.
+  #
+  # == Exceptions
+  #
+  # * ActiveRecordError - Generic error class and superclass of all other errors raised by Active Record.
+  # * AdapterNotSpecified - The configuration hash used in <tt>establish_connection</tt> didn't include an
+  #   <tt>:adapter</tt> key.
+  # * AdapterNotFound - The <tt>:adapter</tt> key used in <tt>establish_connection</tt> specified a non-existent adapter
+  #   (or a bad spelling of an existing one).
+  # * AssociationTypeMismatch - The object assigned to the association wasn't of the type specified in the association definition.
+  # * SerializationTypeMismatch - The serialized object wasn't of the class specified as the second parameter.
+  # * ConnectionNotEstablished+ - No connection has been established. Use <tt>establish_connection</tt> before querying.
+  # * RecordNotFound - No record responded to the +find+ method. Either the row with the given ID doesn't exist
+  #   or the row didn't meet the additional restrictions. Some +find+ calls do not raise this exception to signal
+  #   nothing was found, please check its documentation for further details.
+  # * StatementInvalid - The database server rejected the SQL statement. The precise error is added in the message.
+  # * MultiparameterAssignmentErrors - Collection of errors that occurred during a mass assignment using the
+  #   <tt>attributes=</tt> method. The +errors+ property of this exception contains an array of AttributeAssignmentError
+  #   objects that should be inspected to determine which attributes triggered the errors.
+  # * AttributeAssignmentError - An error occurred while doing a mass assignment through the <tt>attributes=</tt> method.
+  #   You can inspect the +attribute+ property of the exception object to determine which attribute triggered the error.
+  #
+  # *Note*: The attributes listed are class-level attributes (accessible from both the class and instance level).
+  # So it's possible to assign a logger to the class through <tt>Base.logger=</tt> which will then be used by all
+  # instances in the current object space.
+  class Base
+    ##  
+    # :singleton-method:
+    # Accepts a logger conforming to the interface of Log4r or the default Ruby 1.8+ Logger class, which is then passed
+    # on to any new database connections made and which can be retrieved on both a class and instance level by calling +logger+.
+    cattr_accessor :logger, :instance_writer => false
+
+    def self.inherited(child) #:nodoc:
+      @@subclasses[self] ||= []
+      @@subclasses[self] << child
+      super
+    end
+
+    def self.reset_subclasses #:nodoc:
+      nonreloadables = []
+      subclasses.each do |klass|
+        unless ActiveSupport::Dependencies.autoloaded? klass
+          nonreloadables << klass
+          next
+        end
+        klass.instance_variables.each { |var| klass.send(:remove_instance_variable, var) }
+        klass.instance_methods(false).each { |m| klass.send :undef_method, m }
+      end
+      @@subclasses = {}
+      nonreloadables.each { |klass| (@@subclasses[klass.superclass] ||= []) << klass }
+    end
+
+    @@subclasses = {}
+
+    ##
+    # :singleton-method:
+    # Contains the database configuration - as is typically stored in config/database.yml -
+    # as a Hash.
+    #
+    # For example, the following database.yml...
+    # 
+    #   development:
+    #     adapter: sqlite3
+    #     database: db/development.sqlite3
+    #   
+    #   production:
+    #     adapter: sqlite3
+    #     database: db/production.sqlite3
+    #
+    # ...would result in ActiveRecord::Base.configurations to look like this:
+    #
+    #   {
+    #      'development' => {
+    #         'adapter'  => 'sqlite3',
+    #         'database' => 'db/development.sqlite3'
+    #      },
+    #      'production' => {
+    #         'adapter'  => 'sqlite3',
+    #         'database' => 'db/production.sqlite3'
+    #      }
+    #   }
+    cattr_accessor :configurations, :instance_writer => false
+    @@configurations = {}
+
+    ##
+    # :singleton-method:
+    # Accessor for the prefix type that will be prepended to every primary key column name. The options are :table_name and
+    # :table_name_with_underscore. If the first is specified, the Product class will look for "productid" instead of "id" as
+    # the primary column. If the latter is specified, the Product class will look for "product_id" instead of "id". Remember
+    # that this is a global setting for all Active Records.
+    cattr_accessor :primary_key_prefix_type, :instance_writer => false
+    @@primary_key_prefix_type = nil
+
+    ##
+    # :singleton-method:
+    # Accessor for the name of the prefix string to prepend to every table name. So if set to "basecamp_", all
+    # table names will be named like "basecamp_projects", "basecamp_people", etc. This is a convenient way of creating a namespace
+    # for tables in a shared database. By default, the prefix is the empty string.
+    cattr_accessor :table_name_prefix, :instance_writer => false
+    @@table_name_prefix = ""
+
+    ##
+    # :singleton-method:
+    # Works like +table_name_prefix+, but appends instead of prepends (set to "_basecamp" gives "projects_basecamp",
+    # "people_basecamp"). By default, the suffix is the empty string.
+    cattr_accessor :table_name_suffix, :instance_writer => false
+    @@table_name_suffix = ""
+
+    ##
+    # :singleton-method:
+    # Indicates whether table names should be the pluralized versions of the corresponding class names.
+    # If true, the default table name for a Product class will be +products+. If false, it would just be +product+.
+    # See table_name for the full rules on table/class naming. This is true, by default.
+    cattr_accessor :pluralize_table_names, :instance_writer => false
+    @@pluralize_table_names = true
+
+    ##
+    # :singleton-method:
+    # Determines whether to use ANSI codes to colorize the logging statements committed by the connection adapter. These colors
+    # make it much easier to overview things during debugging (when used through a reader like +tail+ and on a black background), but
+    # may complicate matters if you use software like syslog. This is true, by default.
+    cattr_accessor :colorize_logging, :instance_writer => false
+    @@colorize_logging = true
+
+    ##
+    # :singleton-method:
+    # Determines whether to use Time.local (using :local) or Time.utc (using :utc) when pulling dates and times from the database.
+    # This is set to :local by default.
+    cattr_accessor :default_timezone, :instance_writer => false
+    @@default_timezone = :local
+
+    ##
+    # :singleton-method:
+    # Specifies the format to use when dumping the database schema with Rails'
+    # Rakefile.  If :sql, the schema is dumped as (potentially database-
+    # specific) SQL statements.  If :ruby, the schema is dumped as an
+    # ActiveRecord::Schema file which can be loaded into any database that
+    # supports migrations.  Use :ruby if you want to have different database
+    # adapters for, e.g., your development and test environments.
+    cattr_accessor :schema_format , :instance_writer => false
+    @@schema_format = :ruby
+
+    ##
+    # :singleton-method:
+    # Specify whether or not to use timestamps for migration numbers
+    cattr_accessor :timestamped_migrations , :instance_writer => false
+    @@timestamped_migrations = true
+
+    # Determine whether to store the full constant name including namespace when using STI
+    superclass_delegating_accessor :store_full_sti_class
+    self.store_full_sti_class = false
+
+    # Stores the default scope for the class
+    class_inheritable_accessor :default_scoping, :instance_writer => false
+    self.default_scoping = []
+
+    class << self # Class methods
+      # Find operates with four different retrieval approaches:
+      #
+      # * Find by id - This can either be a specific id (1), a list of ids (1, 5, 6), or an array of ids ([5, 6, 10]).
+      #   If no record can be found for all of the listed ids, then RecordNotFound will be raised.
+      # * Find first - This will return the first record matched by the options used. These options can either be specific
+      #   conditions or merely an order. If no record can be matched, +nil+ is returned. Use
+      #   <tt>Model.find(:first, *args)</tt> or its shortcut <tt>Model.first(*args)</tt>.
+      # * Find last - This will return the last record matched by the options used. These options can either be specific
+      #   conditions or merely an order. If no record can be matched, +nil+ is returned. Use
+      #   <tt>Model.find(:last, *args)</tt> or its shortcut <tt>Model.last(*args)</tt>.
+      # * Find all - This will return all the records matched by the options used.
+      #   If no records are found, an empty array is returned. Use
+      #   <tt>Model.find(:all, *args)</tt> or its shortcut <tt>Model.all(*args)</tt>.
+      #
+      # All approaches accept an options hash as their last parameter.
+      #
+      # ==== Parameters
+      #
+      # * <tt>:conditions</tt> - An SQL fragment like "administrator = 1", <tt>[ "user_name = ?", username ]</tt>, or <tt>["user_name = :user_name", { :user_name => user_name }]</tt>. See conditions in the intro.
+      # * <tt>:order</tt> - An SQL fragment like "created_at DESC, name".
+      # * <tt>:group</tt> - An attribute name by which the result should be grouped. Uses the <tt>GROUP BY</tt> SQL-clause.
+      # * <tt>:having</tt> - Combined with +:group+ this can be used to filter the records that a <tt>GROUP BY</tt> returns. Uses the <tt>HAVING</tt> SQL-clause.
+      # * <tt>:limit</tt> - An integer determining the limit on the number of rows that should be returned.
+      # * <tt>:offset</tt> - An integer determining the offset from where the rows should be fetched. So at 5, it would skip rows 0 through 4.
+      # * <tt>:joins</tt> - Either an SQL fragment for additional joins like "LEFT JOIN comments ON comments.post_id = id" (rarely needed),
+      #   named associations in the same form used for the <tt>:include</tt> option, which will perform an <tt>INNER JOIN</tt> on the associated table(s),
+      #   or an array containing a mixture of both strings and named associations.
+      #   If the value is a string, then the records will be returned read-only since they will have attributes that do not correspond to the table's columns.
+      #   Pass <tt>:readonly => false</tt> to override.
+      # * <tt>:include</tt> - Names associations that should be loaded alongside. The symbols named refer
+      #   to already defined associations. See eager loading under Associations.
+      # * <tt>:select</tt> - By default, this is "*" as in "SELECT * FROM", but can be changed if you, for example, want to do a join but not
+      #   include the joined columns. Takes a string with the SELECT SQL fragment (e.g. "id, name").
+      # * <tt>:from</tt> - By default, this is the table name of the class, but can be changed to an alternate table name (or even the name
+      #   of a database view).
+      # * <tt>:readonly</tt> - Mark the returned records read-only so they cannot be saved or updated.
+      # * <tt>:lock</tt> - An SQL fragment like "FOR UPDATE" or "LOCK IN SHARE MODE".
+      #   <tt>:lock => true</tt> gives connection's default exclusive lock, usually "FOR UPDATE".
+      #
+      # ==== Examples
+      #
+      #   # find by id
+      #   Person.find(1)       # returns the object for ID = 1
+      #   Person.find(1, 2, 6) # returns an array for objects with IDs in (1, 2, 6)
+      #   Person.find([7, 17]) # returns an array for objects with IDs in (7, 17)
+      #   Person.find([1])     # returns an array for the object with ID = 1
+      #   Person.find(1, :conditions => "administrator = 1", :order => "created_on DESC")
+      #
+      # Note that returned records may not be in the same order as the ids you
+      # provide since database rows are unordered. Give an explicit <tt>:order</tt>
+      # to ensure the results are sorted.
+      #
+      # ==== Examples
+      #
+      #   # find first
+      #   Person.find(:first) # returns the first object fetched by SELECT * FROM people
+      #   Person.find(:first, :conditions => [ "user_name = ?", user_name])
+      #   Person.find(:first, :conditions => [ "user_name = :u", { :u => user_name }])
+      #   Person.find(:first, :order => "created_on DESC", :offset => 5)
+      #
+      #   # find last
+      #   Person.find(:last) # returns the last object fetched by SELECT * FROM people
+      #   Person.find(:last, :conditions => [ "user_name = ?", user_name])
+      #   Person.find(:last, :order => "created_on DESC", :offset => 5)
+      #
+      #   # find all
+      #   Person.find(:all) # returns an array of objects for all the rows fetched by SELECT * FROM people
+      #   Person.find(:all, :conditions => [ "category IN (?)", categories], :limit => 50)
+      #   Person.find(:all, :conditions => { :friends => ["Bob", "Steve", "Fred"] }
+      #   Person.find(:all, :offset => 10, :limit => 10)
+      #   Person.find(:all, :include => [ :account, :friends ])
+      #   Person.find(:all, :group => "category")
+      #
+      # Example for find with a lock: Imagine two concurrent transactions:
+      # each will read <tt>person.visits == 2</tt>, add 1 to it, and save, resulting
+      # in two saves of <tt>person.visits = 3</tt>.  By locking the row, the second
+      # transaction has to wait until the first is finished; we get the
+      # expected <tt>person.visits == 4</tt>.
+      #
+      #   Person.transaction do
+      #     person = Person.find(1, :lock => true)
+      #     person.visits += 1
+      #     person.save!
+      #   end
+      def find(*args)
+        options = args.extract_options!
+        validate_find_options(options)
+        set_readonly_option!(options)
+
+        case args.first
+          when :first then find_initial(options)
+          when :last  then find_last(options)
+          when :all   then find_every(options)
+          else             find_from_ids(args, options)
+        end
+      end
+
+      # A convenience wrapper for <tt>find(:first, *args)</tt>. You can pass in all the
+      # same arguments to this method as you can to <tt>find(:first)</tt>.
+      def first(*args)
+        find(:first, *args)
+      end
+
+      # A convenience wrapper for <tt>find(:last, *args)</tt>. You can pass in all the
+      # same arguments to this method as you can to <tt>find(:last)</tt>.
+      def last(*args)
+        find(:last, *args)
+      end
+
+      # This is an alias for find(:all).  You can pass in all the same arguments to this method as you can
+      # to find(:all)
+      def all(*args)
+        find(:all, *args)
+      end
+
+      # Executes a custom SQL query against your database and returns all the results.  The results will
+      # be returned as an array with columns requested encapsulated as attributes of the model you call
+      # this method from.  If you call <tt>Product.find_by_sql</tt> then the results will be returned in
+      # a Product object with the attributes you specified in the SQL query.
+      #
+      # If you call a complicated SQL query which spans multiple tables the columns specified by the
+      # SELECT will be attributes of the model, whether or not they are columns of the corresponding
+      # table.
+      #
+      # The +sql+ parameter is a full SQL query as a string.  It will be called as is, there will be
+      # no database agnostic conversions performed.  This should be a last resort because using, for example,
+      # MySQL specific terms will lock you to using that particular database engine or require you to
+      # change your call if you switch engines.
+      #
+      # ==== Examples
+      #   # A simple SQL query spanning multiple tables
+      #   Post.find_by_sql "SELECT p.title, c.author FROM posts p, comments c WHERE p.id = c.post_id"
+      #   > [#<Post:0x36bff9c @attributes={"title"=>"Ruby Meetup", "first_name"=>"Quentin"}>, ...]
+      #
+      #   # You can use the same string replacement techniques as you can with ActiveRecord#find
+      #   Post.find_by_sql ["SELECT title FROM posts WHERE author = ? AND created > ?", author_id, start_date]
+      #   > [#<Post:0x36bff9c @attributes={"first_name"=>"The Cheap Man Buys Twice"}>, ...]
+      def find_by_sql(sql)
+        connection.select_all(sanitize_sql(sql), "#{name} Load").collect! { |record| instantiate(record) }
+      end
+
+      # Returns true if a record exists in the table that matches the +id+ or
+      # conditions given, or false otherwise. The argument can take five forms:
+      #
+      # * Integer - Finds the record with this primary key.
+      # * String - Finds the record with a primary key corresponding to this
+      #   string (such as <tt>'5'</tt>).
+      # * Array - Finds the record that matches these +find+-style conditions
+      #   (such as <tt>['color = ?', 'red']</tt>).
+      # * Hash - Finds the record that matches these +find+-style conditions
+      #   (such as <tt>{:color => 'red'}</tt>).
+      # * No args - Returns false if the table is empty, true otherwise.
+      #
+      # For more information about specifying conditions as a Hash or Array,
+      # see the Conditions section in the introduction to ActiveRecord::Base.
+      #
+      # Note: You can't pass in a condition as a string (like <tt>name =
+      # 'Jamie'</tt>), since it would be sanitized and then queried against
+      # the primary key column, like <tt>id = 'name = \'Jamie\''</tt>.
+      #
+      # ==== Examples
+      #   Person.exists?(5)
+      #   Person.exists?('5')
+      #   Person.exists?(:name => "David")
+      #   Person.exists?(['name LIKE ?', "%#{query}%"])
+      #   Person.exists?
+      def exists?(id_or_conditions = {})
+        connection.select_all(
+          construct_finder_sql(
+            :select     => "#{quoted_table_name}.#{primary_key}",
+            :conditions => expand_id_conditions(id_or_conditions),
+            :limit      => 1
+          ),
+          "#{name} Exists"
+        ).size > 0
+      end
+
+      # Creates an object (or multiple objects) and saves it to the database, if validations pass.
+      # The resulting object is returned whether the object was saved successfully to the database or not.
+      #
+      # The +attributes+ parameter can be either be a Hash or an Array of Hashes.  These Hashes describe the
+      # attributes on the objects that are to be created.
+      #
+      # ==== Examples
+      #   # Create a single new object
+      #   User.create(:first_name => 'Jamie')
+      #
+      #   # Create an Array of new objects
+      #   User.create([{ :first_name => 'Jamie' }, { :first_name => 'Jeremy' }])
+      #
+      #   # Create a single object and pass it into a block to set other attributes.
+      #   User.create(:first_name => 'Jamie') do |u|
+      #     u.is_admin = false
+      #   end
+      #
+      #   # Creating an Array of new objects using a block, where the block is executed for each object:
+      #   User.create([{ :first_name => 'Jamie' }, { :first_name => 'Jeremy' }]) do |u|
+      #     u.is_admin = false
+      #   end
+      def create(attributes = nil, &block)
+        if attributes.is_a?(Array)
+          attributes.collect { |attr| create(attr, &block) }
+        else
+          object = new(attributes)
+          yield(object) if block_given?
+          object.save
+          object
+        end
+      end
+
+      # Updates an object (or multiple objects) and saves it to the database, if validations pass.
+      # The resulting object is returned whether the object was saved successfully to the database or not.
+      #
+      # ==== Parameters
+      #
+      # * +id+ - This should be the id or an array of ids to be updated.
+      # * +attributes+ - This should be a Hash of attributes to be set on the object, or an array of Hashes.
+      #
+      # ==== Examples
+      #
+      #   # Updating one record:
+      #   Person.update(15, { :user_name => 'Samuel', :group => 'expert' })
+      #
+      #   # Updating multiple records:
+      #   people = { 1 => { "first_name" => "David" }, 2 => { "first_name" => "Jeremy" } }
+      #   Person.update(people.keys, people.values)
+      def update(id, attributes)
+        if id.is_a?(Array)
+          idx = -1
+          id.collect { |one_id| idx += 1; update(one_id, attributes[idx]) }
+        else
+          object = find(id)
+          object.update_attributes(attributes)
+          object
+        end
+      end
+
+      # Deletes the row with a primary key matching the +id+ argument, using a
+      # SQL +DELETE+ statement, and returns the number of rows deleted. Active
+      # Record objects are not instantiated, so the object's callbacks are not
+      # executed, including any <tt>:dependent</tt> association options or
+      # Observer methods.
+      #
+      # You can delete multiple rows at once by passing an Array of <tt>id</tt>s.
+      #
+      # Note: Although it is often much faster than the alternative,
+      # <tt>#destroy</tt>, skipping callbacks might bypass business logic in
+      # your application that ensures referential integrity or performs other
+      # essential jobs.
+      #
+      # ==== Examples
+      #
+      #   # Delete a single row
+      #   Todo.delete(1)
+      #
+      #   # Delete multiple rows
+      #   Todo.delete([2,3,4])
+      def delete(id)
+        delete_all([ "#{connection.quote_column_name(primary_key)} IN (?)", id ])
+      end
+
+      # Destroy an object (or multiple objects) that has the given id, the object is instantiated first,
+      # therefore all callbacks and filters are fired off before the object is deleted.  This method is
+      # less efficient than ActiveRecord#delete but allows cleanup methods and other actions to be run.
+      #
+      # This essentially finds the object (or multiple objects) with the given id, creates a new object
+      # from the attributes, and then calls destroy on it.
+      #
+      # ==== Parameters
+      #
+      # * +id+ - Can be either an Integer or an Array of Integers.
+      #
+      # ==== Examples
+      #
+      #   # Destroy a single object
+      #   Todo.destroy(1)
+      #
+      #   # Destroy multiple objects
+      #   todos = [1,2,3]
+      #   Todo.destroy(todos)
+      def destroy(id)
+        if id.is_a?(Array)
+          id.map { |one_id| destroy(one_id) }
+        else
+          find(id).destroy
+        end
+      end
+
+      # Updates all records with details given if they match a set of conditions supplied, limits and order can
+      # also be supplied. This method constructs a single SQL UPDATE statement and sends it straight to the
+      # database. It does not instantiate the involved models and it does not trigger Active Record callbacks.
+      #
+      # ==== Parameters
+      #
+      # * +updates+ - A string of column and value pairs that will be set on any records that match conditions. This creates the SET clause of the generated SQL.
+      # * +conditions+ - An SQL fragment like "administrator = 1" or [ "user_name = ?", username ]. See conditions in the intro for more info.
+      # * +options+ - Additional options are <tt>:limit</tt> and <tt>:order</tt>, see the examples for usage.
+      #
+      # ==== Examples
+      #
+      #   # Update all billing objects with the 3 different attributes given
+      #   Billing.update_all( "category = 'authorized', approved = 1, author = 'David'" )
+      #
+      #   # Update records that match our conditions
+      #   Billing.update_all( "author = 'David'", "title LIKE '%Rails%'" )
+      #
+      #   # Update records that match our conditions but limit it to 5 ordered by date
+      #   Billing.update_all( "author = 'David'", "title LIKE '%Rails%'",
+      #                         :order => 'created_at', :limit => 5 )
+      def update_all(updates, conditions = nil, options = {})
+        sql  = "UPDATE #{quoted_table_name} SET #{sanitize_sql_for_assignment(updates)} "
+
+        scope = scope(:find)
+
+        select_sql = ""
+        add_conditions!(select_sql, conditions, scope)
+
+        if options.has_key?(:limit) || (scope && scope[:limit])
+          # Only take order from scope if limit is also provided by scope, this
+          # is useful for updating a has_many association with a limit.
+          add_order!(select_sql, options[:order], scope)
+
+          add_limit!(select_sql, options, scope)
+          sql.concat(connection.limited_update_conditions(select_sql, quoted_table_name, connection.quote_column_name(primary_key)))
+        else
+          add_order!(select_sql, options[:order], nil)
+          sql.concat(select_sql)
+        end
+
+        connection.update(sql, "#{name} Update")
+      end
+
+      # Destroys the records matching +conditions+ by instantiating each
+      # record and calling its +destroy+ method. Each object's callbacks are
+      # executed (including <tt>:dependent</tt> association options and
+      # +before_destroy+/+after_destroy+ Observer methods). Returns the
+      # collection of objects that were destroyed; each will be frozen, to
+      # reflect that no changes should be made (since they can't be
+      # persisted).
+      #
+      # Note: Instantiation, callback execution, and deletion of each
+      # record can be time consuming when you're removing many records at
+      # once. It generates at least one SQL +DELETE+ query per record (or
+      # possibly more, to enforce your callbacks). If you want to delete many
+      # rows quickly, without concern for their associations or callbacks, use
+      # +delete_all+ instead.
+      #
+      # ==== Parameters
+      #
+      # * +conditions+ - A string, array, or hash that specifies which records
+      #   to destroy. If omitted, all records are destroyed. See the
+      #   Conditions section in the introduction to ActiveRecord::Base for
+      #   more information.
+      #
+      # ==== Examples
+      #
+      #   Person.destroy_all("last_login < '2004-04-04'")
+      #   Person.destroy_all(:status => "inactive")
+      def destroy_all(conditions = nil)
+        find(:all, :conditions => conditions).each { |object| object.destroy }
+      end
+
+      # Deletes the records matching +conditions+ without instantiating the records first, and hence not
+      # calling the +destroy+ method nor invoking callbacks. This is a single SQL DELETE statement that
+      # goes straight to the database, much more efficient than +destroy_all+. Be careful with relations
+      # though, in particular <tt>:dependent</tt> rules defined on associations are not honored.  Returns
+      # the number of rows affected.
+      #
+      # ==== Parameters
+      #
+      # * +conditions+ - Conditions are specified the same way as with +find+ method.
+      #
+      # ==== Example
+      #
+      #   Post.delete_all("person_id = 5 AND (category = 'Something' OR category = 'Else')")
+      #   Post.delete_all(["person_id = ? AND (category = ? OR category = ?)", 5, 'Something', 'Else'])
+      #
+      # Both calls delete the affected posts all at once with a single DELETE statement. If you need to destroy dependent
+      # associations or call your <tt>before_*</tt> or +after_destroy+ callbacks, use the +destroy_all+ method instead.
+      def delete_all(conditions = nil)
+        sql = "DELETE FROM #{quoted_table_name} "
+        add_conditions!(sql, conditions, scope(:find))
+        connection.delete(sql, "#{name} Delete all")
+      end
+
+      # Returns the result of an SQL statement that should only include a COUNT(*) in the SELECT part.
+      # The use of this method should be restricted to complicated SQL queries that can't be executed
+      # using the ActiveRecord::Calculations class methods.  Look into those before using this.
+      #
+      # ==== Parameters
+      #
+      # * +sql+ - An SQL statement which should return a count query from the database, see the example below.
+      #
+      # ==== Examples
+      #
+      #   Product.count_by_sql "SELECT COUNT(*) FROM sales s, customers c WHERE s.customer_id = c.id"
+      def count_by_sql(sql)
+        sql = sanitize_conditions(sql)
+        connection.select_value(sql, "#{name} Count").to_i
+      end
+
+      # A generic "counter updater" implementation, intended primarily to be
+      # used by increment_counter and decrement_counter, but which may also
+      # be useful on its own. It simply does a direct SQL update for the record
+      # with the given ID, altering the given hash of counters by the amount
+      # given by the corresponding value:
+      #
+      # ==== Parameters
+      #
+      # * +id+ - The id of the object you wish to update a counter on or an Array of ids.
+      # * +counters+ - An Array of Hashes containing the names of the fields
+      #   to update as keys and the amount to update the field by as values.
+      #
+      # ==== Examples
+      #
+      #   # For the Post with id of 5, decrement the comment_count by 1, and
+      #   # increment the action_count by 1
+      #   Post.update_counters 5, :comment_count => -1, :action_count => 1
+      #   # Executes the following SQL:
+      #   # UPDATE posts
+      #   #    SET comment_count = comment_count - 1,
+      #   #        action_count = action_count + 1
+      #   #  WHERE id = 5
+      #
+      #   # For the Posts with id of 10 and 15, increment the comment_count by 1
+      #   Post.update_counters [10, 15], :comment_count => 1
+      #   # Executes the following SQL:
+      #   # UPDATE posts
+      #   #    SET comment_count = comment_count + 1,
+      #   #  WHERE id IN (10, 15)
+      def update_counters(id, counters)
+        updates = counters.inject([]) { |list, (counter_name, increment)|
+          sign = increment < 0 ? "-" : "+"
+          list << "#{connection.quote_column_name(counter_name)} = COALESCE(#{connection.quote_column_name(counter_name)}, 0) #{sign} #{increment.abs}"
+        }.join(", ")
+
+        if id.is_a?(Array)
+          ids_list = id.map {|i| quote_value(i)}.join(', ')
+          condition = "IN  (#{ids_list})"
+        else
+          condition = "= #{quote_value(id)}"
+        end
+
+        update_all(updates, "#{connection.quote_column_name(primary_key)} #{condition}")
+      end
+
+      # Increment a number field by one, usually representing a count.
+      #
+      # This is used for caching aggregate values, so that they don't need to be computed every time.
+      # For example, a DiscussionBoard may cache post_count and comment_count otherwise every time the board is
+      # shown it would have to run an SQL query to find how many posts and comments there are.
+      #
+      # ==== Parameters
+      #
+      # * +counter_name+ - The name of the field that should be incremented.
+      # * +id+ - The id of the object that should be incremented.
+      #
+      # ==== Examples
+      #
+      #   # Increment the post_count column for the record with an id of 5
+      #   DiscussionBoard.increment_counter(:post_count, 5)
+      def increment_counter(counter_name, id)
+        update_counters(id, counter_name => 1)
+      end
+
+      # Decrement a number field by one, usually representing a count.
+      #
+      # This works the same as increment_counter but reduces the column value by 1 instead of increasing it.
+      #
+      # ==== Parameters
+      #
+      # * +counter_name+ - The name of the field that should be decremented.
+      # * +id+ - The id of the object that should be decremented.
+      #
+      # ==== Examples
+      #
+      #   # Decrement the post_count column for the record with an id of 5
+      #   DiscussionBoard.decrement_counter(:post_count, 5)
+      def decrement_counter(counter_name, id)
+        update_counters(id, counter_name => -1)
+      end
+
+      # Attributes named in this macro are protected from mass-assignment,
+      # such as <tt>new(attributes)</tt>,
+      # <tt>update_attributes(attributes)</tt>, or
+      # <tt>attributes=(attributes)</tt>.
+      #
+      # Mass-assignment to these attributes will simply be ignored, to assign
+      # to them you can use direct writer methods. This is meant to protect
+      # sensitive attributes from being overwritten by malicious users
+      # tampering with URLs or forms.
+      #
+      #   class Customer < ActiveRecord::Base
+      #     attr_protected :credit_rating
+      #   end
+      #
+      #   customer = Customer.new("name" => David, "credit_rating" => "Excellent")
+      #   customer.credit_rating # => nil
+      #   customer.attributes = { "description" => "Jolly fellow", "credit_rating" => "Superb" }
+      #   customer.credit_rating # => nil
+      #
+      #   customer.credit_rating = "Average"
+      #   customer.credit_rating # => "Average"
+      #
+      # To start from an all-closed default and enable attributes as needed,
+      # have a look at +attr_accessible+.
+      def attr_protected(*attributes)
+        write_inheritable_attribute(:attr_protected, Set.new(attributes.map(&:to_s)) + (protected_attributes || []))
+      end
+
+      # Returns an array of all the attributes that have been protected from mass-assignment.
+      def protected_attributes # :nodoc:
+        read_inheritable_attribute(:attr_protected)
+      end
+
+      # Specifies a white list of model attributes that can be set via
+      # mass-assignment, such as <tt>new(attributes)</tt>,
+      # <tt>update_attributes(attributes)</tt>, or
+      # <tt>attributes=(attributes)</tt>
+      #
+      # This is the opposite of the +attr_protected+ macro: Mass-assignment
+      # will only set attributes in this list, to assign to the rest of
+      # attributes you can use direct writer methods. This is meant to protect
+      # sensitive attributes from being overwritten by malicious users
+      # tampering with URLs or forms. If you'd rather start from an all-open
+      # default and restrict attributes as needed, have a look at
+      # +attr_protected+.
+      #
+      #   class Customer < ActiveRecord::Base
+      #     attr_accessible :name, :nickname
+      #   end
+      #
+      #   customer = Customer.new(:name => "David", :nickname => "Dave", :credit_rating => "Excellent")
+      #   customer.credit_rating # => nil
+      #   customer.attributes = { :name => "Jolly fellow", :credit_rating => "Superb" }
+      #   customer.credit_rating # => nil
+      #
+      #   customer.credit_rating = "Average"
+      #   customer.credit_rating # => "Average"
+      def attr_accessible(*attributes)
+        write_inheritable_attribute(:attr_accessible, Set.new(attributes.map(&:to_s)) + (accessible_attributes || []))
+      end
+
+      # Returns an array of all the attributes that have been made accessible to mass-assignment.
+      def accessible_attributes # :nodoc:
+        read_inheritable_attribute(:attr_accessible)
+      end
+
+       # Attributes listed as readonly can be set for a new record, but will be ignored in database updates afterwards.
+       def attr_readonly(*attributes)
+         write_inheritable_attribute(:attr_readonly, Set.new(attributes.map(&:to_s)) + (readonly_attributes || []))
+       end
+
+       # Returns an array of all the attributes that have been specified as readonly.
+       def readonly_attributes
+         read_inheritable_attribute(:attr_readonly)
+       end
+
+      # If you have an attribute that needs to be saved to the database as an object, and retrieved as the same object,
+      # then specify the name of that attribute using this method and it will be handled automatically.
+      # The serialization is done through YAML. If +class_name+ is specified, the serialized object must be of that
+      # class on retrieval or SerializationTypeMismatch will be raised.
+      #
+      # ==== Parameters
+      #
+      # * +attr_name+ - The field name that should be serialized.
+      # * +class_name+ - Optional, class name that the object type should be equal to.
+      #
+      # ==== Example
+      #   # Serialize a preferences attribute
+      #   class User
+      #     serialize :preferences
+      #   end
+      def serialize(attr_name, class_name = Object)
+        serialized_attributes[attr_name.to_s] = class_name
+      end
+
+      # Returns a hash of all the attributes that have been specified for serialization as keys and their class restriction as values.
+      def serialized_attributes
+        read_inheritable_attribute(:attr_serialized) or write_inheritable_attribute(:attr_serialized, {})
+      end
+
+      # Guesses the table name (in forced lower-case) based on the name of the class in the inheritance hierarchy descending
+      # directly from ActiveRecord::Base. So if the hierarchy looks like: Reply < Message < ActiveRecord::Base, then Message is used
+      # to guess the table name even when called on Reply. The rules used to do the guess are handled by the Inflector class
+      # in Active Support, which knows almost all common English inflections. You can add new inflections in config/initializers/inflections.rb.
+      #
+      # Nested classes are given table names prefixed by the singular form of
+      # the parent's table name. Enclosing modules are not considered.
+      #
+      # ==== Examples
+      #
+      #   class Invoice < ActiveRecord::Base; end;
+      #   file                  class               table_name
+      #   invoice.rb            Invoice             invoices
+      #
+      #   class Invoice < ActiveRecord::Base; class Lineitem < ActiveRecord::Base; end; end;
+      #   file                  class               table_name
+      #   invoice.rb            Invoice::Lineitem   invoice_lineitems
+      #
+      #   module Invoice; class Lineitem < ActiveRecord::Base; end; end;
+      #   file                  class               table_name
+      #   invoice/lineitem.rb   Invoice::Lineitem   lineitems
+      #
+      # Additionally, the class-level +table_name_prefix+ is prepended and the
+      # +table_name_suffix+ is appended.  So if you have "myapp_" as a prefix,
+      # the table name guess for an Invoice class becomes "myapp_invoices".
+      # Invoice::Lineitem becomes "myapp_invoice_lineitems".
+      #
+      # You can also overwrite this class method to allow for unguessable
+      # links, such as a Mouse class with a link to a "mice" table. Example:
+      #
+      #   class Mouse < ActiveRecord::Base
+      #     set_table_name "mice"
+      #   end
+      def table_name
+        reset_table_name
+      end
+
+      def reset_table_name #:nodoc:
+        base = base_class
+
+        name =
+          # STI subclasses always use their superclass' table.
+          unless self == base
+            base.table_name
+          else
+            # Nested classes are prefixed with singular parent table name.
+            if parent < ActiveRecord::Base && !parent.abstract_class?
+              contained = parent.table_name
+              contained = contained.singularize if parent.pluralize_table_names
+              contained << '_'
+            end
+            name = "#{table_name_prefix}#{contained}#{undecorated_table_name(base.name)}#{table_name_suffix}"
+          end
+
+        set_table_name(name)
+        name
+      end
+
+      # Defines the primary key field -- can be overridden in subclasses. Overwriting will negate any effect of the
+      # primary_key_prefix_type setting, though.
+      def primary_key
+        reset_primary_key
+      end
+
+      def reset_primary_key #:nodoc:
+        key = get_primary_key(base_class.name)
+        set_primary_key(key)
+        key
+      end
+
+      def get_primary_key(base_name) #:nodoc:
+        key = 'id'
+        case primary_key_prefix_type
+          when :table_name
+            key = base_name.to_s.foreign_key(false)
+          when :table_name_with_underscore
+            key = base_name.to_s.foreign_key
+        end
+        key
+      end
+
+      # Defines the column name for use with single table inheritance
+      # -- can be set in subclasses like so: self.inheritance_column = "type_id"
+      def inheritance_column
+        @inheritance_column ||= "type".freeze
+      end
+
+      # Lazy-set the sequence name to the connection's default.  This method
+      # is only ever called once since set_sequence_name overrides it.
+      def sequence_name #:nodoc:
+        reset_sequence_name
+      end
+
+      def reset_sequence_name #:nodoc:
+        default = connection.default_sequence_name(table_name, primary_key)
+        set_sequence_name(default)
+        default
+      end
+
+      # Sets the table name to use to the given value, or (if the value
+      # is nil or false) to the value returned by the given block.
+      #
+      #   class Project < ActiveRecord::Base
+      #     set_table_name "project"
+      #   end
+      def set_table_name(value = nil, &block)
+        define_attr_method :table_name, value, &block
+      end
+      alias :table_name= :set_table_name
+
+      # Sets the name of the primary key column to use to the given value,
+      # or (if the value is nil or false) to the value returned by the given
+      # block.
+      #
+      #   class Project < ActiveRecord::Base
+      #     set_primary_key "sysid"
+      #   end
+      def set_primary_key(value = nil, &block)
+        define_attr_method :primary_key, value, &block
+      end
+      alias :primary_key= :set_primary_key
+
+      # Sets the name of the inheritance column to use to the given value,
+      # or (if the value # is nil or false) to the value returned by the
+      # given block.
+      #
+      #   class Project < ActiveRecord::Base
+      #     set_inheritance_column do
+      #       original_inheritance_column + "_id"
+      #     end
+      #   end
+      def set_inheritance_column(value = nil, &block)
+        define_attr_method :inheritance_column, value, &block
+      end
+      alias :inheritance_column= :set_inheritance_column
+
+      # Sets the name of the sequence to use when generating ids to the given
+      # value, or (if the value is nil or false) to the value returned by the
+      # given block. This is required for Oracle and is useful for any
+      # database which relies on sequences for primary key generation.
+      #
+      # If a sequence name is not explicitly set when using Oracle or Firebird,
+      # it will default to the commonly used pattern of: #{table_name}_seq
+      #
+      # If a sequence name is not explicitly set when using PostgreSQL, it
+      # will discover the sequence corresponding to your primary key for you.
+      #
+      #   class Project < ActiveRecord::Base
+      #     set_sequence_name "projectseq"   # default would have been "project_seq"
+      #   end
+      def set_sequence_name(value = nil, &block)
+        define_attr_method :sequence_name, value, &block
+      end
+      alias :sequence_name= :set_sequence_name
+
+      # Turns the +table_name+ back into a class name following the reverse rules of +table_name+.
+      def class_name(table_name = table_name) # :nodoc:
+        # remove any prefix and/or suffix from the table name
+        class_name = table_name[table_name_prefix.length..-(table_name_suffix.length + 1)].camelize
+        class_name = class_name.singularize if pluralize_table_names
+        class_name
+      end
+
+      # Indicates whether the table associated with this class exists
+      def table_exists?
+        connection.table_exists?(table_name)
+      end
+
+      # Returns an array of column objects for the table associated with this class.
+      def columns
+        unless defined?(@columns) && @columns
+          @columns = connection.columns(table_name, "#{name} Columns")
+          @columns.each { |column| column.primary = column.name == primary_key }
+        end
+        @columns
+      end
+
+      # Returns a hash of column objects for the table associated with this class.
+      def columns_hash
+        @columns_hash ||= columns.inject({}) { |hash, column| hash[column.name] = column; hash }
+      end
+
+      # Returns an array of column names as strings.
+      def column_names
+        @column_names ||= columns.map { |column| column.name }
+      end
+
+      # Returns an array of column objects where the primary id, all columns ending in "_id" or "_count",
+      # and columns used for single table inheritance have been removed.
+      def content_columns
+        @content_columns ||= columns.reject { |c| c.primary || c.name =~ /(_id|_count)$/ || c.name == inheritance_column }
+      end
+
+      # Returns a hash of all the methods added to query each of the columns in the table with the name of the method as the key
+      # and true as the value. This makes it possible to do O(1) lookups in respond_to? to check if a given method for attribute
+      # is available.
+      def column_methods_hash #:nodoc:
+        @dynamic_methods_hash ||= column_names.inject(Hash.new(false)) do |methods, attr|
+          attr_name = attr.to_s
+          methods[attr.to_sym]       = attr_name
+          methods["#{attr}=".to_sym] = attr_name
+          methods["#{attr}?".to_sym] = attr_name
+          methods["#{attr}_before_type_cast".to_sym] = attr_name
+          methods
+        end
+      end
+
+      # Resets all the cached information about columns, which will cause them
+      # to be reloaded on the next request.
+      #
+      # The most common usage pattern for this method is probably in a migration,
+      # when just after creating a table you want to populate it with some default
+      # values, eg:
+      #
+      #  class CreateJobLevels < ActiveRecord::Migration
+      #    def self.up
+      #      create_table :job_levels do |t|
+      #        t.integer :id
+      #        t.string :name
+      #
+      #        t.timestamps
+      #      end
+      #
+      #      JobLevel.reset_column_information
+      #      %w{assistant executive manager director}.each do |type|
+      #        JobLevel.create(:name => type)
+      #      end
+      #    end
+      #
+      #    def self.down
+      #      drop_table :job_levels
+      #    end
+      #  end
+      def reset_column_information
+        generated_methods.each { |name| undef_method(name) }
+        @column_names = @columns = @columns_hash = @content_columns = @dynamic_methods_hash = @generated_methods = @inheritance_column = nil
+      end
+
+      def reset_column_information_and_inheritable_attributes_for_all_subclasses#:nodoc:
+        subclasses.each { |klass| klass.reset_inheritable_attributes; klass.reset_column_information }
+      end
+
+      def self_and_descendants_from_active_record#nodoc:
+        klass = self
+        classes = [klass]
+        while klass != klass.base_class  
+          classes << klass = klass.superclass
+        end
+        classes
+      rescue
+        # OPTIMIZE this rescue is to fix this test: ./test/cases/reflection_test.rb:56:in `test_human_name_for_column'
+        # Appearantly the method base_class causes some trouble.
+        # It now works for sure.
+        [self]
+      end
+
+      # Transforms attribute key names into a more humane format, such as "First name" instead of "first_name". Example:
+      #   Person.human_attribute_name("first_name") # => "First name"
+      # This used to be depricated in favor of humanize, but is now preferred, because it automatically uses the I18n
+      # module now.
+      # Specify +options+ with additional translating options.
+      def human_attribute_name(attribute_key_name, options = {})
+        defaults = self_and_descendants_from_active_record.map do |klass|
+          :"#{klass.name.underscore}.#{attribute_key_name}"
+        end
+        defaults << options[:default] if options[:default]
+        defaults.flatten!
+        defaults << attribute_key_name.humanize
+        options[:count] ||= 1
+        I18n.translate(defaults.shift, options.merge(:default => defaults, :scope => [:activerecord, :attributes]))
+      end
+
+      # Transform the modelname into a more humane format, using I18n.
+      # Defaults to the basic humanize method.
+      # Default scope of the translation is activerecord.models
+      # Specify +options+ with additional translating options.
+      def human_name(options = {})
+        defaults = self_and_descendants_from_active_record.map do |klass|
+          :"#{klass.name.underscore}"
+        end 
+        defaults << self.name.humanize
+        I18n.translate(defaults.shift, {:scope => [:activerecord, :models], :count => 1, :default => defaults}.merge(options))
+      end
+
+      # True if this isn't a concrete subclass needing a STI type condition.
+      def descends_from_active_record?
+        if superclass.abstract_class?
+          superclass.descends_from_active_record?
+        else
+          superclass == Base || !columns_hash.include?(inheritance_column)
+        end
+      end
+
+      def finder_needs_type_condition? #:nodoc:
+        # This is like this because benchmarking justifies the strange :false stuff
+        :true == (@finder_needs_type_condition ||= descends_from_active_record? ? :false : :true)
+      end
+
+      # Returns a string like 'Post id:integer, title:string, body:text'
+      def inspect
+        if self == Base
+          super
+        elsif abstract_class?
+          "#{super}(abstract)"
+        elsif table_exists?
+          attr_list = columns.map { |c| "#{c.name}: #{c.type}" } * ', '
+          "#{super}(#{attr_list})"
+        else
+          "#{super}(Table doesn't exist)"
+        end
+      end
+
+      def quote_value(value, column = nil) #:nodoc:
+        connection.quote(value,column)
+      end
+
+      # Used to sanitize objects before they're used in an SQL SELECT statement. Delegates to <tt>connection.quote</tt>.
+      def sanitize(object) #:nodoc:
+        connection.quote(object)
+      end
+
+      # Log and benchmark multiple statements in a single block. Example:
+      #
+      #   Project.benchmark("Creating project") do
+      #     project = Project.create("name" => "stuff")
+      #     project.create_manager("name" => "David")
+      #     project.milestones << Milestone.find(:all)
+      #   end
+      #
+      # The benchmark is only recorded if the current level of the logger is less than or equal to the <tt>log_level</tt>,
+      # which makes it easy to include benchmarking statements in production software that will remain inexpensive because
+      # the benchmark will only be conducted if the log level is low enough.
+      #
+      # The logging of the multiple statements is turned off unless <tt>use_silence</tt> is set to false.
+      def benchmark(title, log_level = Logger::DEBUG, use_silence = true)
+        if logger && logger.level <= log_level
+          result = nil
+          ms = Benchmark.ms { result = use_silence ? silence { yield } : yield }
+          logger.add(log_level, '%s (%.1fms)' % [title, ms])
+          result
+        else
+          yield
+        end
+      end
+
+      # Silences the logger for the duration of the block.
+      def silence
+        old_logger_level, logger.level = logger.level, Logger::ERROR if logger
+        yield
+      ensure
+        logger.level = old_logger_level if logger
+      end
+
+      # Overwrite the default class equality method to provide support for association proxies.
+      def ===(object)
+        object.is_a?(self)
+      end
+
+      # Returns the base AR subclass that this class descends from. If A
+      # extends AR::Base, A.base_class will return A. If B descends from A
+      # through some arbitrarily deep hierarchy, B.base_class will return A.
+      def base_class
+        class_of_active_record_descendant(self)
+      end
+
+      # Set this to true if this is an abstract class (see <tt>abstract_class?</tt>).
+      attr_accessor :abstract_class
+
+      # Returns whether this class is a base AR class.  If A is a base class and
+      # B descends from A, then B.base_class will return B.
+      def abstract_class?
+        defined?(@abstract_class) && @abstract_class == true
+      end
+
+      def respond_to?(method_id, include_private = false)
+        if match = DynamicFinderMatch.match(method_id)
+          return true if all_attributes_exists?(match.attribute_names)
+        elsif match = DynamicScopeMatch.match(method_id)
+          return true if all_attributes_exists?(match.attribute_names)
+        end
+
+        super
+      end
+
+      def sti_name
+        store_full_sti_class ? name : name.demodulize
+      end
+
+      # Merges conditions so that the result is a valid +condition+
+      def merge_conditions(*conditions)
+        segments = []
+
+        conditions.each do |condition|
+          unless condition.blank?
+            sql = sanitize_sql(condition)
+            segments << sql unless sql.blank?
+          end
+        end
+
+        "(#{segments.join(') AND (')})" unless segments.empty?
+      end
+
+      private
+        def find_initial(options)
+          options.update(:limit => 1)
+          find_every(options).first
+        end
+
+        def find_last(options)
+          order = options[:order]
+
+          if order
+            order = reverse_sql_order(order)
+          elsif !scoped?(:find, :order)
+            order = "#{table_name}.#{primary_key} DESC"
+          end
+
+          if scoped?(:find, :order)
+            scope = scope(:find)
+            original_scoped_order = scope[:order]
+            scope[:order] = reverse_sql_order(original_scoped_order)
+          end
+
+          begin
+            find_initial(options.merge({ :order => order }))
+          ensure
+            scope[:order] = original_scoped_order if original_scoped_order
+          end
+        end
+
+        def reverse_sql_order(order_query)
+          reversed_query = order_query.to_s.split(/,/).each { |s|
+            if s.match(/\s(asc|ASC)$/)
+              s.gsub!(/\s(asc|ASC)$/, ' DESC')
+            elsif s.match(/\s(desc|DESC)$/)
+              s.gsub!(/\s(desc|DESC)$/, ' ASC')
+            elsif !s.match(/\s(asc|ASC|desc|DESC)$/)
+              s.concat(' DESC')
+            end
+          }.join(',')
+        end
+
+        def find_every(options)
+          include_associations = merge_includes(scope(:find, :include), options[:include])
+
+          if include_associations.any? && references_eager_loaded_tables?(options)
+            records = find_with_associations(options)
+          else
+            records = find_by_sql(construct_finder_sql(options))
+            if include_associations.any?
+              preload_associations(records, include_associations)
+            end
+          end
+
+          records.each { |record| record.readonly! } if options[:readonly]
+
+          records
+        end
+
+        def find_from_ids(ids, options)
+          expects_array = ids.first.kind_of?(Array)
+          return ids.first if expects_array && ids.first.empty?
+
+          ids = ids.flatten.compact.uniq
+
+          case ids.size
+            when 0
+              raise RecordNotFound, "Couldn't find #{name} without an ID"
+            when 1
+              result = find_one(ids.first, options)
+              expects_array ? [ result ] : result
+            else
+              find_some(ids, options)
+          end
+        end
+
+        def find_one(id, options)
+          conditions = " AND (#{sanitize_sql(options[:conditions])})" if options[:conditions]
+          options.update :conditions => "#{quoted_table_name}.#{connection.quote_column_name(primary_key)} = #{quote_value(id,columns_hash[primary_key])}#{conditions}"
+
+          # Use find_every(options).first since the primary key condition
+          # already ensures we have a single record. Using find_initial adds
+          # a superfluous :limit => 1.
+          if result = find_every(options).first
+            result
+          else
+            raise RecordNotFound, "Couldn't find #{name} with ID=#{id}#{conditions}"
+          end
+        end
+
+        def find_some(ids, options)
+          conditions = " AND (#{sanitize_sql(options[:conditions])})" if options[:conditions]
+          ids_list   = ids.map { |id| quote_value(id,columns_hash[primary_key]) }.join(',')
+          options.update :conditions => "#{quoted_table_name}.#{connection.quote_column_name(primary_key)} IN (#{ids_list})#{conditions}"
+
+          result = find_every(options)
+
+          # Determine expected size from limit and offset, not just ids.size.
+          expected_size =
+            if options[:limit] && ids.size > options[:limit]
+              options[:limit]
+            else
+              ids.size
+            end
+
+          # 11 ids with limit 3, offset 9 should give 2 results.
+          if options[:offset] && (ids.size - options[:offset] < expected_size)
+            expected_size = ids.size - options[:offset]
+          end
+
+          if result.size == expected_size
+            result
+          else
+            raise RecordNotFound, "Couldn't find all #{name.pluralize} with IDs (#{ids_list})#{conditions} (found #{result.size} results, but was looking for #{expected_size})"
+          end
+        end
+
+        # Finder methods must instantiate through this method to work with the
+        # single-table inheritance model that makes it possible to create
+        # objects of different types from the same table.
+        def instantiate(record)
+          object =
+            if subclass_name = record[inheritance_column]
+              # No type given.
+              if subclass_name.empty?
+                allocate
+
+              else
+                # Ignore type if no column is present since it was probably
+                # pulled in from a sloppy join.
+                unless columns_hash.include?(inheritance_column)
+                  allocate
+
+                else
+                  begin
+                    compute_type(subclass_name).allocate
+                  rescue NameError
+                    raise SubclassNotFound,
+                      "The single-table inheritance mechanism failed to locate the subclass: '#{record[inheritance_column]}'. " +
+                      "This error is raised because the column '#{inheritance_column}' is reserved for storing the class in case of inheritance. " +
+                      "Please rename this column if you didn't intend it to be used for storing the inheritance class " +
+                      "or overwrite #{self.to_s}.inheritance_column to use another column for that information."
+                  end
+                end
+              end
+            else
+              allocate
+            end
+
+          object.instance_variable_set("@attributes", record)
+          object.instance_variable_set("@attributes_cache", Hash.new)
+
+          if object.respond_to_without_attributes?(:after_find)
+            object.send(:callback, :after_find)
+          end
+
+          if object.respond_to_without_attributes?(:after_initialize)
+            object.send(:callback, :after_initialize)
+          end
+
+          object
+        end
+
+        # Nest the type name in the same module as this class.
+        # Bar is "MyApp::Business::Bar" relative to MyApp::Business::Foo
+        def type_name_with_module(type_name)
+          if store_full_sti_class
+            type_name
+          else
+            (/^::/ =~ type_name) ? type_name : "#{parent.name}::#{type_name}"
+          end
+        end
+
+        def default_select(qualified)
+          if qualified
+            quoted_table_name + '.*'
+          else
+            '*'
+          end
+        end
+
+        def construct_finder_sql(options)
+          scope = scope(:find)
+          sql  = "SELECT #{options[:select] || (scope && scope[:select]) || default_select(options[:joins] || (scope && scope[:joins]))} "
+          sql << "FROM #{options[:from]  || (scope && scope[:from]) || quoted_table_name} "
+
+          add_joins!(sql, options[:joins], scope)
+          add_conditions!(sql, options[:conditions], scope)
+
+          add_group!(sql, options[:group], options[:having], scope)
+          add_order!(sql, options[:order], scope)
+          add_limit!(sql, options, scope)
+          add_lock!(sql, options, scope)
+
+          sql
+        end
+
+        # Merges includes so that the result is a valid +include+
+        def merge_includes(first, second)
+         (safe_to_array(first) + safe_to_array(second)).uniq
+        end
+
+        def merge_joins(*joins)
+          if joins.any?{|j| j.is_a?(String) || array_of_strings?(j) }
+            joins = joins.collect do |join|
+              join = [join] if join.is_a?(String)
+              unless array_of_strings?(join)
+                join_dependency = ActiveRecord::Associations::ClassMethods::InnerJoinDependency.new(self, join, nil)
+                join = join_dependency.join_associations.collect { |assoc| assoc.association_join }
+              end
+              join
+            end
+            joins.flatten.map{|j| j.strip}.uniq
+          else
+            joins.collect{|j| safe_to_array(j)}.flatten.uniq
+          end
+        end
+
+        # Object#to_a is deprecated, though it does have the desired behavior
+        def safe_to_array(o)
+          case o
+          when NilClass
+            []
+          when Array
+            o
+          else
+            [o]
+          end
+        end
+
+        def array_of_strings?(o)
+          o.is_a?(Array) && o.all?{|obj| obj.is_a?(String)}
+        end
+
+        def add_order!(sql, order, scope = :auto)
+          scope = scope(:find) if :auto == scope
+          scoped_order = scope[:order] if scope
+          if order
+            sql << " ORDER BY #{order}"
+            if scoped_order && scoped_order != order
+              sql << ", #{scoped_order}"
+            end
+          else
+            sql << " ORDER BY #{scoped_order}" if scoped_order
+          end
+        end
+
+        def add_group!(sql, group, having, scope = :auto)
+          if group
+            sql << " GROUP BY #{group}"
+            sql << " HAVING #{sanitize_sql_for_conditions(having)}" if having
+          else
+            scope = scope(:find) if :auto == scope
+            if scope && (scoped_group = scope[:group])
+              sql << " GROUP BY #{scoped_group}"
+              sql << " HAVING #{sanitize_sql_for_conditions(scope[:having])}" if scope[:having]
+            end
+          end
+        end
+
+        # The optional scope argument is for the current <tt>:find</tt> scope.
+        def add_limit!(sql, options, scope = :auto)
+          scope = scope(:find) if :auto == scope
+
+          if scope
+            options[:limit] ||= scope[:limit]
+            options[:offset] ||= scope[:offset]
+          end
+
+          connection.add_limit_offset!(sql, options)
+        end
+
+        # The optional scope argument is for the current <tt>:find</tt> scope.
+        # The <tt>:lock</tt> option has precedence over a scoped <tt>:lock</tt>.
+        def add_lock!(sql, options, scope = :auto)
+          scope = scope(:find) if :auto == scope
+          options = options.reverse_merge(:lock => scope[:lock]) if scope
+          connection.add_lock!(sql, options)
+        end
+
+        # The optional scope argument is for the current <tt>:find</tt> scope.
+        def add_joins!(sql, joins, scope = :auto)
+          scope = scope(:find) if :auto == scope
+          merged_joins = scope && scope[:joins] && joins ? merge_joins(scope[:joins], joins) : (joins || scope && scope[:joins])
+          case merged_joins
+          when Symbol, Hash, Array
+            if array_of_strings?(merged_joins)
+              sql << merged_joins.join(' ') + " "
+            else
+              join_dependency = ActiveRecord::Associations::ClassMethods::InnerJoinDependency.new(self, merged_joins, nil)
+              sql << " #{join_dependency.join_associations.collect { |assoc| assoc.association_join }.join} "
+            end
+          when String
+            sql << " #{merged_joins} "
+          end
+        end
+
+        # Adds a sanitized version of +conditions+ to the +sql+ string. Note that the passed-in +sql+ string is changed.
+        # The optional scope argument is for the current <tt>:find</tt> scope.
+        def add_conditions!(sql, conditions, scope = :auto)
+          scope = scope(:find) if :auto == scope
+          conditions = [conditions]
+          conditions << scope[:conditions] if scope
+          conditions << type_condition if finder_needs_type_condition?
+          merged_conditions = merge_conditions(*conditions)
+          sql << "WHERE #{merged_conditions} " unless merged_conditions.blank?
+        end
+
+        def type_condition(table_alias=nil)
+          quoted_table_alias = self.connection.quote_table_name(table_alias || table_name)
+          quoted_inheritance_column = connection.quote_column_name(inheritance_column)
+          type_condition = subclasses.inject("#{quoted_table_alias}.#{quoted_inheritance_column} = '#{sti_name}' ") do |condition, subclass|
+            condition << "OR #{quoted_table_alias}.#{quoted_inheritance_column} = '#{subclass.sti_name}' "
+          end
+
+          " (#{type_condition}) "
+        end
+
+        # Guesses the table name, but does not decorate it with prefix and suffix information.
+        def undecorated_table_name(class_name = base_class.name)
+          table_name = class_name.to_s.demodulize.underscore
+          table_name = table_name.pluralize if pluralize_table_names
+          table_name
+        end
+
+        # Enables dynamic finders like <tt>find_by_user_name(user_name)</tt> and <tt>find_by_user_name_and_password(user_name, password)</tt>
+        # that are turned into <tt>find(:first, :conditions => ["user_name = ?", user_name])</tt> and
+        # <tt>find(:first, :conditions => ["user_name = ? AND password = ?", user_name, password])</tt> respectively. Also works for
+        # <tt>find(:all)</tt> by using <tt>find_all_by_amount(50)</tt> that is turned into <tt>find(:all, :conditions => ["amount = ?", 50])</tt>.
+        #
+        # It's even possible to use all the additional parameters to +find+. For example, the full interface for +find_all_by_amount+
+        # is actually <tt>find_all_by_amount(amount, options)</tt>.
+        #
+        # Also enables dynamic scopes like scoped_by_user_name(user_name) and scoped_by_user_name_and_password(user_name, password) that
+        # are turned into scoped(:conditions => ["user_name = ?", user_name]) and scoped(:conditions => ["user_name = ? AND password = ?", user_name, password])
+        # respectively.
+        #
+        # Each dynamic finder, scope or initializer/creator is also defined in the class after it is first invoked, so that future
+        # attempts to use it do not run through method_missing.
+        def method_missing(method_id, *arguments, &block)
+          if match = DynamicFinderMatch.match(method_id)
+            attribute_names = match.attribute_names
+            super unless all_attributes_exists?(attribute_names)
+            if match.finder?
+              finder = match.finder
+              bang = match.bang?
+              # def self.find_by_login_and_activated(*args)
+              #   options = args.extract_options!
+              #   attributes = construct_attributes_from_arguments(
+              #     [:login,:activated],
+              #     args
+              #   )
+              #   finder_options = { :conditions => attributes }
+              #   validate_find_options(options)
+              #   set_readonly_option!(options)
+              #
+              #   if options[:conditions]
+              #     with_scope(:find => finder_options) do
+              #       find(:first, options)
+              #     end
+              #   else
+              #     find(:first, options.merge(finder_options))
+              #   end
+              # end
+              self.class_eval %{
+                def self.#{method_id}(*args)
+                  options = args.extract_options!
+                  attributes = construct_attributes_from_arguments(
+                    [:#{attribute_names.join(',:')}],
+                    args
+                  )
+                  finder_options = { :conditions => attributes }
+                  validate_find_options(options)
+                  set_readonly_option!(options)
+
+                  #{'result = ' if bang}if options[:conditions]
+                    with_scope(:find => finder_options) do
+                      find(:#{finder}, options)
+                    end
+                  else
+                    find(:#{finder}, options.merge(finder_options))
+                  end
+                  #{'result || raise(RecordNotFound, "Couldn\'t find #{name} with #{attributes.to_a.collect {|pair| "#{pair.first} = #{pair.second}"}.join(\', \')}")' if bang}
+                end
+              }, __FILE__, __LINE__
+              send(method_id, *arguments)
+            elsif match.instantiator?
+              instantiator = match.instantiator
+              # def self.find_or_create_by_user_id(*args)
+              #   guard_protected_attributes = false
+              #
+              #   if args[0].is_a?(Hash)
+              #     guard_protected_attributes = true
+              #     attributes = args[0].with_indifferent_access
+              #     find_attributes = attributes.slice(*[:user_id])
+              #   else
+              #     find_attributes = attributes = construct_attributes_from_arguments([:user_id], args)
+              #   end
+              #
+              #   options = { :conditions => find_attributes }
+              #   set_readonly_option!(options)
+              #
+              #   record = find(:first, options)
+              #
+              #   if record.nil?
+              #     record = self.new { |r| r.send(:attributes=, attributes, guard_protected_attributes) }
+              #     yield(record) if block_given?
+              #     record.save
+              #     record
+              #   else
+              #     record
+              #   end
+              # end
+              self.class_eval %{
+                def self.#{method_id}(*args)
+                  guard_protected_attributes = false
+
+                  if args[0].is_a?(Hash)
+                    guard_protected_attributes = true
+                    attributes = args[0].with_indifferent_access
+                    find_attributes = attributes.slice(*[:#{attribute_names.join(',:')}])
+                  else
+                    find_attributes = attributes = construct_attributes_from_arguments([:#{attribute_names.join(',:')}], args)
+                  end
+
+                  options = { :conditions => find_attributes }
+                  set_readonly_option!(options)
+
+                  record = find(:first, options)
+
+                  if record.nil?
+                    record = self.new { |r| r.send(:attributes=, attributes, guard_protected_attributes) }
+                    #{'yield(record) if block_given?'}
+                    #{'record.save' if instantiator == :create}
+                    record
+                  else
+                    record
+                  end
+                end
+              }, __FILE__, __LINE__
+              send(method_id, *arguments, &block)
+            end
+          elsif match = DynamicScopeMatch.match(method_id)
+            attribute_names = match.attribute_names
+            super unless all_attributes_exists?(attribute_names)
+            if match.scope?
+              self.class_eval %{
+                def self.#{method_id}(*args)                        # def self.scoped_by_user_name_and_password(*args)
+                  options = args.extract_options!                   #   options = args.extract_options!
+                  attributes = construct_attributes_from_arguments( #   attributes = construct_attributes_from_arguments(
+                    [:#{attribute_names.join(',:')}], args          #     [:user_name, :password], args
+                  )                                                 #   )
+                                                                    # 
+                  scoped(:conditions => attributes)                 #   scoped(:conditions => attributes)
+                end                                                 # end
+              }, __FILE__, __LINE__
+              send(method_id, *arguments)
+            end
+          else
+            super
+          end
+        end
+
+        def construct_attributes_from_arguments(attribute_names, arguments)
+          attributes = {}
+          attribute_names.each_with_index { |name, idx| attributes[name] = arguments[idx] }
+          attributes
+        end
+
+        # Similar in purpose to +expand_hash_conditions_for_aggregates+.
+        def expand_attribute_names_for_aggregates(attribute_names)
+          expanded_attribute_names = []
+          attribute_names.each do |attribute_name|
+            unless (aggregation = reflect_on_aggregation(attribute_name.to_sym)).nil?
+              aggregate_mapping(aggregation).each do |field_attr, aggregate_attr|
+                expanded_attribute_names << field_attr
+              end
+            else
+              expanded_attribute_names << attribute_name
+            end
+          end
+          expanded_attribute_names
+        end
+
+        def all_attributes_exists?(attribute_names)
+          attribute_names = expand_attribute_names_for_aggregates(attribute_names)
+          attribute_names.all? { |name| column_methods_hash.include?(name.to_sym) }
+        end
+
+        def attribute_condition(quoted_column_name, argument)
+          case argument
+            when nil   then "#{quoted_column_name} IS ?"
+            when Array, ActiveRecord::Associations::AssociationCollection, ActiveRecord::NamedScope::Scope then "#{quoted_column_name} IN (?)"
+            when Range then if argument.exclude_end?
+                              "#{quoted_column_name} >= ? AND #{quoted_column_name} < ?"
+                            else
+                              "#{quoted_column_name} BETWEEN ? AND ?"
+                            end
+            else            "#{quoted_column_name} = ?"
+          end
+        end
+
+        # Interpret Array and Hash as conditions and anything else as an id.
+        def expand_id_conditions(id_or_conditions)
+          case id_or_conditions
+            when Array, Hash then id_or_conditions
+            else sanitize_sql(primary_key => id_or_conditions)
+          end
+        end
+
+        # Defines an "attribute" method (like +inheritance_column+ or
+        # +table_name+). A new (class) method will be created with the
+        # given name. If a value is specified, the new method will
+        # return that value (as a string). Otherwise, the given block
+        # will be used to compute the value of the method.
+        #
+        # The original method will be aliased, with the new name being
+        # prefixed with "original_". This allows the new method to
+        # access the original value.
+        #
+        # Example:
+        #
+        #   class A < ActiveRecord::Base
+        #     define_attr_method :primary_key, "sysid"
+        #     define_attr_method( :inheritance_column ) do
+        #       original_inheritance_column + "_id"
+        #     end
+        #   end
+        def define_attr_method(name, value=nil, &block)
+          sing = class << self; self; end
+          sing.send :alias_method, "original_#{name}", name
+          if block_given?
+            sing.send :define_method, name, &block
+          else
+            # use eval instead of a block to work around a memory leak in dev
+            # mode in fcgi
+            sing.class_eval "def #{name}; #{value.to_s.inspect}; end"
+          end
+        end
+
+      protected
+        # Scope parameters to method calls within the block.  Takes a hash of method_name => parameters hash.
+        # method_name may be <tt>:find</tt> or <tt>:create</tt>. <tt>:find</tt> parameters may include the <tt>:conditions</tt>, <tt>:joins</tt>,
+        # <tt>:include</tt>, <tt>:offset</tt>, <tt>:limit</tt>, and <tt>:readonly</tt> options. <tt>:create</tt> parameters are an attributes hash.
+        #
+        #   class Article < ActiveRecord::Base
+        #     def self.create_with_scope
+        #       with_scope(:find => { :conditions => "blog_id = 1" }, :create => { :blog_id => 1 }) do
+        #         find(1) # => SELECT * from articles WHERE blog_id = 1 AND id = 1
+        #         a = create(1)
+        #         a.blog_id # => 1
+        #       end
+        #     end
+        #   end
+        #
+        # In nested scopings, all previous parameters are overwritten by the innermost rule, with the exception of
+        # <tt>:conditions</tt>, <tt>:include</tt>, and <tt>:joins</tt> options in <tt>:find</tt>, which are merged.
+        #
+        # <tt>:joins</tt> options are uniqued so multiple scopes can join in the same table without table aliasing
+        # problems.  If you need to join multiple tables, but still want one of the tables to be uniqued, use the
+        # array of strings format for your joins.
+        #
+        #   class Article < ActiveRecord::Base
+        #     def self.find_with_scope
+        #       with_scope(:find => { :conditions => "blog_id = 1", :limit => 1 }, :create => { :blog_id => 1 }) do
+        #         with_scope(:find => { :limit => 10 })
+        #           find(:all) # => SELECT * from articles WHERE blog_id = 1 LIMIT 10
+        #         end
+        #         with_scope(:find => { :conditions => "author_id = 3" })
+        #           find(:all) # => SELECT * from articles WHERE blog_id = 1 AND author_id = 3 LIMIT 1
+        #         end
+        #       end
+        #     end
+        #   end
+        #
+        # You can ignore any previous scopings by using the <tt>with_exclusive_scope</tt> method.
+        #
+        #   class Article < ActiveRecord::Base
+        #     def self.find_with_exclusive_scope
+        #       with_scope(:find => { :conditions => "blog_id = 1", :limit => 1 }) do
+        #         with_exclusive_scope(:find => { :limit => 10 })
+        #           find(:all) # => SELECT * from articles LIMIT 10
+        #         end
+        #       end
+        #     end
+        #   end
+        #
+        # *Note*: the +:find+ scope also has effect on update and deletion methods,
+        # like +update_all+ and +delete_all+.
+        def with_scope(method_scoping = {}, action = :merge, &block)
+          method_scoping = method_scoping.method_scoping if method_scoping.respond_to?(:method_scoping)
+
+          # Dup first and second level of hash (method and params).
+          method_scoping = method_scoping.inject({}) do |hash, (method, params)|
+            hash[method] = (params == true) ? params : params.dup
+            hash
+          end
+
+          method_scoping.assert_valid_keys([ :find, :create ])
+
+          if f = method_scoping[:find]
+            f.assert_valid_keys(VALID_FIND_OPTIONS)
+            set_readonly_option! f
+          end
+
+          # Merge scopings
+          if [:merge, :reverse_merge].include?(action) && current_scoped_methods
+            method_scoping = current_scoped_methods.inject(method_scoping) do |hash, (method, params)|
+              case hash[method]
+                when Hash
+                  if method == :find
+                    (hash[method].keys + params.keys).uniq.each do |key|
+                      merge = hash[method][key] && params[key] # merge if both scopes have the same key
+                      if key == :conditions && merge
+                        if params[key].is_a?(Hash) && hash[method][key].is_a?(Hash)
+                          hash[method][key] = merge_conditions(hash[method][key].deep_merge(params[key]))
+                        else
+                          hash[method][key] = merge_conditions(params[key], hash[method][key])
+                        end
+                      elsif key == :include && merge
+                        hash[method][key] = merge_includes(hash[method][key], params[key]).uniq
+                      elsif key == :joins && merge
+                        hash[method][key] = merge_joins(params[key], hash[method][key])
+                      else
+                        hash[method][key] = hash[method][key] || params[key]
+                      end
+                    end
+                  else
+                    if action == :reverse_merge
+                      hash[method] = hash[method].merge(params)
+                    else
+                      hash[method] = params.merge(hash[method])
+                    end
+                  end
+                else
+                  hash[method] = params
+              end
+              hash
+            end
+          end
+
+          self.scoped_methods << method_scoping
+          begin
+            yield
+          ensure
+            self.scoped_methods.pop
+          end
+        end
+
+        # Works like with_scope, but discards any nested properties.
+        def with_exclusive_scope(method_scoping = {}, &block)
+          with_scope(method_scoping, :overwrite, &block)
+        end
+
+        def subclasses #:nodoc:
+          @@subclasses[self] ||= []
+          @@subclasses[self] + extra = @@subclasses[self].inject([]) {|list, subclass| list + subclass.subclasses }
+        end
+
+        # Sets the default options for the model. The format of the
+        # <tt>options</tt> argument is the same as in find.
+        #
+        #   class Person < ActiveRecord::Base
+        #     default_scope :order => 'last_name, first_name'
+        #   end
+        def default_scope(options = {})
+          self.default_scoping << { :find => options, :create => (options.is_a?(Hash) && options.has_key?(:conditions)) ? options[:conditions] : {} }
+        end
+
+        # Test whether the given method and optional key are scoped.
+        def scoped?(method, key = nil) #:nodoc:
+          if current_scoped_methods && (scope = current_scoped_methods[method])
+            !key || !scope[key].nil?
+          end
+        end
+
+        # Retrieve the scope for the given method and optional key.
+        def scope(method, key = nil) #:nodoc:
+          if current_scoped_methods && (scope = current_scoped_methods[method])
+            key ? scope[key] : scope
+          end
+        end
+
+        def scoped_methods #:nodoc:
+          Thread.current[:"#{self}_scoped_methods"] ||= self.default_scoping.dup
+        end
+
+        def current_scoped_methods #:nodoc:
+          scoped_methods.last
+        end
+
+        # Returns the class type of the record using the current module as a prefix. So descendants of
+        # MyApp::Business::Account would appear as MyApp::Business::AccountSubclass.
+        def compute_type(type_name)
+          modularized_name = type_name_with_module(type_name)
+          silence_warnings do
+            begin
+              class_eval(modularized_name, __FILE__, __LINE__)
+            rescue NameError
+              class_eval(type_name, __FILE__, __LINE__)
+            end
+          end
+        end
+
+        # Returns the class descending directly from ActiveRecord::Base or an
+        # abstract class, if any, in the inheritance hierarchy.
+        def class_of_active_record_descendant(klass)
+          if klass.superclass == Base || klass.superclass.abstract_class?
+            klass
+          elsif klass.superclass.nil?
+            raise ActiveRecordError, "#{name} doesn't belong in a hierarchy descending from ActiveRecord"
+          else
+            class_of_active_record_descendant(klass.superclass)
+          end
+        end
+
+        # Returns the name of the class descending directly from Active Record in the inheritance hierarchy.
+        def class_name_of_active_record_descendant(klass) #:nodoc:
+          klass.base_class.name
+        end
+
+        # Accepts an array, hash, or string of SQL conditions and sanitizes
+        # them into a valid SQL fragment for a WHERE clause.
+        #   ["name='%s' and group_id='%s'", "foo'bar", 4]  returns  "name='foo''bar' and group_id='4'"
+        #   { :name => "foo'bar", :group_id => 4 }  returns "name='foo''bar' and group_id='4'"
+        #   "name='foo''bar' and group_id='4'" returns "name='foo''bar' and group_id='4'"
+        def sanitize_sql_for_conditions(condition)
+          return nil if condition.blank?
+
+          case condition
+            when Array; sanitize_sql_array(condition)
+            when Hash;  sanitize_sql_hash_for_conditions(condition)
+            else        condition
+          end
+        end
+        alias_method :sanitize_sql, :sanitize_sql_for_conditions
+
+        # Accepts an array, hash, or string of SQL conditions and sanitizes
+        # them into a valid SQL fragment for a SET clause.
+        #   { :name => nil, :group_id => 4 }  returns "name = NULL , group_id='4'"
+        def sanitize_sql_for_assignment(assignments)
+          case assignments
+            when Array; sanitize_sql_array(assignments)
+            when Hash;  sanitize_sql_hash_for_assignment(assignments)
+            else        assignments
+          end
+        end
+
+        def aggregate_mapping(reflection)
+          mapping = reflection.options[:mapping] || [reflection.name, reflection.name]
+          mapping.first.is_a?(Array) ? mapping : [mapping]
+        end
+
+        # Accepts a hash of SQL conditions and replaces those attributes
+        # that correspond to a +composed_of+ relationship with their expanded
+        # aggregate attribute values.
+        # Given:
+        #     class Person < ActiveRecord::Base
+        #       composed_of :address, :class_name => "Address",
+        #         :mapping => [%w(address_street street), %w(address_city city)]
+        #     end
+        # Then:
+        #     { :address => Address.new("813 abc st.", "chicago") }
+        #       # => { :address_street => "813 abc st.", :address_city => "chicago" }
+        def expand_hash_conditions_for_aggregates(attrs)
+          expanded_attrs = {}
+          attrs.each do |attr, value|
+            unless (aggregation = reflect_on_aggregation(attr.to_sym)).nil?
+              mapping = aggregate_mapping(aggregation)
+              mapping.each do |field_attr, aggregate_attr|
+                if mapping.size == 1 && !value.respond_to?(aggregate_attr)
+                  expanded_attrs[field_attr] = value
+                else
+                  expanded_attrs[field_attr] = value.send(aggregate_attr)
+                end
+              end
+            else
+              expanded_attrs[attr] = value
+            end
+          end
+          expanded_attrs
+        end
+
+        # Sanitizes a hash of attribute/value pairs into SQL conditions for a WHERE clause.
+        #   { :name => "foo'bar", :group_id => 4 }
+        #     # => "name='foo''bar' and group_id= 4"
+        #   { :status => nil, :group_id => [1,2,3] }
+        #     # => "status IS NULL and group_id IN (1,2,3)"
+        #   { :age => 13..18 }
+        #     # => "age BETWEEN 13 AND 18"
+        #   { 'other_records.id' => 7 }
+        #     # => "`other_records`.`id` = 7"
+        #   { :other_records => { :id => 7 } }
+        #     # => "`other_records`.`id` = 7"
+        # And for value objects on a composed_of relationship:
+        #   { :address => Address.new("123 abc st.", "chicago") }
+        #     # => "address_street='123 abc st.' and address_city='chicago'"
+        def sanitize_sql_hash_for_conditions(attrs, table_name = quoted_table_name)
+          attrs = expand_hash_conditions_for_aggregates(attrs)
+
+          conditions = attrs.map do |attr, value|
+            unless value.is_a?(Hash)
+              attr = attr.to_s
+
+              # Extract table name from qualified attribute names.
+              if attr.include?('.')
+                table_name, attr = attr.split('.', 2)
+                table_name = connection.quote_table_name(table_name)
+              end
+
+              attribute_condition("#{table_name}.#{connection.quote_column_name(attr)}", value)
+            else
+              sanitize_sql_hash_for_conditions(value, connection.quote_table_name(attr.to_s))
+            end
+          end.join(' AND ')
+
+          replace_bind_variables(conditions, expand_range_bind_variables(attrs.values))
+        end
+        alias_method :sanitize_sql_hash, :sanitize_sql_hash_for_conditions
+
+        # Sanitizes a hash of attribute/value pairs into SQL conditions for a SET clause.
+        #   { :status => nil, :group_id => 1 }
+        #     # => "status = NULL , group_id = 1"
+        def sanitize_sql_hash_for_assignment(attrs)
+          attrs.map do |attr, value|
+            "#{connection.quote_column_name(attr)} = #{quote_bound_value(value)}"
+          end.join(', ')
+        end
+
+        # Accepts an array of conditions.  The array has each value
+        # sanitized and interpolated into the SQL statement.
+        #   ["name='%s' and group_id='%s'", "foo'bar", 4]  returns  "name='foo''bar' and group_id='4'"
+        def sanitize_sql_array(ary)
+          statement, *values = ary
+          if values.first.is_a?(Hash) and statement =~ /:\w+/
+            replace_named_bind_variables(statement, values.first)
+          elsif statement.include?('?')
+            replace_bind_variables(statement, values)
+          else
+            statement % values.collect { |value| connection.quote_string(value.to_s) }
+          end
+        end
+
+        alias_method :sanitize_conditions, :sanitize_sql
+
+        def replace_bind_variables(statement, values) #:nodoc:
+          raise_if_bind_arity_mismatch(statement, statement.count('?'), values.size)
+          bound = values.dup
+          statement.gsub('?') { quote_bound_value(bound.shift) }
+        end
+
+        def replace_named_bind_variables(statement, bind_vars) #:nodoc:
+          statement.gsub(/(:?):([a-zA-Z]\w*)/) do
+            if $1 == ':' # skip postgresql casts
+              $& # return the whole match
+            elsif bind_vars.include?(match = $2.to_sym)
+              quote_bound_value(bind_vars[match])
+            else
+              raise PreparedStatementInvalid, "missing value for :#{match} in #{statement}"
+            end
+          end
+        end
+
+        def expand_range_bind_variables(bind_vars) #:nodoc:
+          expanded = []
+
+          bind_vars.each do |var|
+            next if var.is_a?(Hash)
+
+            if var.is_a?(Range)
+              expanded << var.first
+              expanded << var.last
+            else
+              expanded << var
+            end
+          end
+
+          expanded
+        end
+
+        def quote_bound_value(value) #:nodoc:
+          if value.respond_to?(:map) && !value.acts_like?(:string)
+            if value.respond_to?(:empty?) && value.empty?
+              connection.quote(nil)
+            else
+              value.map { |v| connection.quote(v) }.join(',')
+            end
+          else
+            connection.quote(value)
+          end
+        end
+
+        def raise_if_bind_arity_mismatch(statement, expected, provided) #:nodoc:
+          unless expected == provided
+            raise PreparedStatementInvalid, "wrong number of bind variables (#{provided} for #{expected}) in: #{statement}"
+          end
+        end
+
+        VALID_FIND_OPTIONS = [ :conditions, :include, :joins, :limit, :offset,
+                               :order, :select, :readonly, :group, :having, :from, :lock ]
+
+        def validate_find_options(options) #:nodoc:
+          options.assert_valid_keys(VALID_FIND_OPTIONS)
+        end
+
+        def set_readonly_option!(options) #:nodoc:
+          # Inherit :readonly from finder scope if set.  Otherwise,
+          # if :joins is not blank then :readonly defaults to true.
+          unless options.has_key?(:readonly)
+            if scoped_readonly = scope(:find, :readonly)
+              options[:readonly] = scoped_readonly
+            elsif !options[:joins].blank? && !options[:select]
+              options[:readonly] = true
+            end
+          end
+        end
+
+        def encode_quoted_value(value) #:nodoc:
+          quoted_value = connection.quote(value)
+          quoted_value = "'#{quoted_value[1..-2].gsub(/\'/, "\\\\'")}'" if quoted_value.include?("\\\'") # (for ruby mode) "
+          quoted_value
+        end
+    end
+
+    public
+      # New objects can be instantiated as either empty (pass no construction parameter) or pre-set with
+      # attributes but not yet saved (pass a hash with key names matching the associated table column names).
+      # In both instances, valid attribute keys are determined by the column names of the associated table --
+      # hence you can't have attributes that aren't part of the table columns.
+      def initialize(attributes = nil)
+        @attributes = attributes_from_column_definition
+        @attributes_cache = {}
+        @new_record = true
+        ensure_proper_type
+        self.attributes = attributes unless attributes.nil?
+        self.class.send(:scope, :create).each { |att,value| self.send("#{att}=", value) } if self.class.send(:scoped?, :create)
+        result = yield self if block_given?
+        callback(:after_initialize) if respond_to_without_attributes?(:after_initialize)
+        result
+      end
+
+      # A model instance's primary key is always available as model.id
+      # whether you name it the default 'id' or set it to something else.
+      def id
+        attr_name = self.class.primary_key
+        column = column_for_attribute(attr_name)
+
+        self.class.send(:define_read_method, :id, attr_name, column)
+        # now that the method exists, call it
+        self.send attr_name.to_sym
+
+      end
+
+      # Returns a String, which Action Pack uses for constructing an URL to this
+      # object. The default implementation returns this record's id as a String,
+      # or nil if this record's unsaved.
+      #
+      # For example, suppose that you have a User model, and that you have a
+      # <tt>map.resources :users</tt> route. Normally, +user_path+ will
+      # construct a path with the user object's 'id' in it:
+      #
+      #   user = User.find_by_name('Phusion')
+      #   user_path(user)  # => "/users/1"
+      #
+      # You can override +to_param+ in your model to make +user_path+ construct
+      # a path using the user's name instead of the user's id:
+      #
+      #   class User < ActiveRecord::Base
+      #     def to_param  # overridden
+      #       name
+      #     end
+      #   end
+      #   
+      #   user = User.find_by_name('Phusion')
+      #   user_path(user)  # => "/users/Phusion"
+      def to_param
+        # We can't use alias_method here, because method 'id' optimizes itself on the fly.
+        (id = self.id) ? id.to_s : nil # Be sure to stringify the id for routes
+      end
+
+      # Returns a cache key that can be used to identify this record.
+      #
+      # ==== Examples
+      #
+      #   Product.new.cache_key     # => "products/new"
+      #   Product.find(5).cache_key # => "products/5" (updated_at not available)
+      #   Person.find(5).cache_key  # => "people/5-20071224150000" (updated_at available)
+      def cache_key
+        case
+        when new_record?
+          "#{self.class.model_name.cache_key}/new"
+        when timestamp = self[:updated_at]
+          "#{self.class.model_name.cache_key}/#{id}-#{timestamp.to_s(:number)}"
+        else
+          "#{self.class.model_name.cache_key}/#{id}"
+        end
+      end
+
+      def id_before_type_cast #:nodoc:
+        read_attribute_before_type_cast(self.class.primary_key)
+      end
+
+      def quoted_id #:nodoc:
+        quote_value(id, column_for_attribute(self.class.primary_key))
+      end
+
+      # Sets the primary ID.
+      def id=(value)
+        write_attribute(self.class.primary_key, value)
+      end
+
+      # Returns true if this object hasn't been saved yet -- that is, a record for the object doesn't exist yet; otherwise, returns false.
+      def new_record?
+        @new_record || false
+      end
+
+      # :call-seq:
+      #   save(perform_validation = true)
+      #
+      # Saves the model.
+      #
+      # If the model is new a record gets created in the database, otherwise
+      # the existing record gets updated.
+      #
+      # If +perform_validation+ is true validations run. If any of them fail
+      # the action is cancelled and +save+ returns +false+. If the flag is
+      # false validations are bypassed altogether. See
+      # ActiveRecord::Validations for more information. 
+      #
+      # There's a series of callbacks associated with +save+. If any of the
+      # <tt>before_*</tt> callbacks return +false+ the action is cancelled and
+      # +save+ returns +false+. See ActiveRecord::Callbacks for further
+      # details. 
+      def save
+        create_or_update
+      end
+
+      # Saves the model.
+      #
+      # If the model is new a record gets created in the database, otherwise
+      # the existing record gets updated.
+      #
+      # With <tt>save!</tt> validations always run. If any of them fail
+      # ActiveRecord::RecordInvalid gets raised. See ActiveRecord::Validations
+      # for more information. 
+      #
+      # There's a series of callbacks associated with <tt>save!</tt>. If any of
+      # the <tt>before_*</tt> callbacks return +false+ the action is cancelled
+      # and <tt>save!</tt> raises ActiveRecord::RecordNotSaved. See
+      # ActiveRecord::Callbacks for further details. 
+      def save!
+        create_or_update || raise(RecordNotSaved)
+      end
+
+      # Deletes the record in the database and freezes this instance to
+      # reflect that no changes should be made (since they can't be
+      # persisted). Returns the frozen instance.
+      #
+      # The row is simply removed with a SQL +DELETE+ statement on the
+      # record's primary key, and no callbacks are executed.
+      #
+      # To enforce the object's +before_destroy+ and +after_destroy+
+      # callbacks, Observer methods, or any <tt>:dependent</tt> association
+      # options, use <tt>#destroy</tt>.
+      def delete
+        self.class.delete(id) unless new_record?
+        freeze
+      end
+
+      # Deletes the record in the database and freezes this instance to reflect that no changes should
+      # be made (since they can't be persisted).
+      def destroy
+        unless new_record?
+          connection.delete(
+            "DELETE FROM #{self.class.quoted_table_name} " +
+            "WHERE #{connection.quote_column_name(self.class.primary_key)} = #{quoted_id}",
+            "#{self.class.name} Destroy"
+          )
+        end
+
+        freeze
+      end
+
+      # Returns a clone of the record that hasn't been assigned an id yet and
+      # is treated as a new record.  Note that this is a "shallow" clone:
+      # it copies the object's attributes only, not its associations.
+      # The extent of a "deep" clone is application-specific and is therefore
+      # left to the application to implement according to its need.
+      def clone
+        attrs = clone_attributes(:read_attribute_before_type_cast)
+        attrs.delete(self.class.primary_key)
+        record = self.class.new
+        record.send :instance_variable_set, '@attributes', attrs
+        record
+      end
+
+      # Returns an instance of the specified +klass+ with the attributes of the current record. This is mostly useful in relation to
+      # single-table inheritance structures where you want a subclass to appear as the superclass. This can be used along with record
+      # identification in Action Pack to allow, say, <tt>Client < Company</tt> to do something like render <tt>:partial => @client.becomes(Company)</tt>
+      # to render that instance using the companies/company partial instead of clients/client.
+      #
+      # Note: The new instance will share a link to the same attributes as the original class. So any change to the attributes in either
+      # instance will affect the other.
+      def becomes(klass)
+        returning klass.new do |became|
+          became.instance_variable_set("@attributes", @attributes)
+          became.instance_variable_set("@attributes_cache", @attributes_cache)
+          became.instance_variable_set("@new_record", new_record?)
+        end
+      end
+
+      # Updates a single attribute and saves the record without going through the normal validation procedure.
+      # This is especially useful for boolean flags on existing records. The regular +update_attribute+ method
+      # in Base is replaced with this when the validations module is mixed in, which it is by default.
+      def update_attribute(name, value)
+        send(name.to_s + '=', value)
+        save(false)
+      end
+
+      # Updates all the attributes from the passed-in Hash and saves the record. If the object is invalid, the saving will
+      # fail and false will be returned.
+      def update_attributes(attributes)
+        self.attributes = attributes
+        save
+      end
+
+      # Updates an object just like Base.update_attributes but calls save! instead of save so an exception is raised if the record is invalid.
+      def update_attributes!(attributes)
+        self.attributes = attributes
+        save!
+      end
+
+      # Initializes +attribute+ to zero if +nil+ and adds the value passed as +by+ (default is 1).
+      # The increment is performed directly on the underlying attribute, no setter is invoked.
+      # Only makes sense for number-based attributes. Returns +self+.
+      def increment(attribute, by = 1)
+        self[attribute] ||= 0
+        self[attribute] += by
+        self
+      end
+
+      # Wrapper around +increment+ that saves the record. This method differs from
+      # its non-bang version in that it passes through the attribute setter.
+      # Saving is not subjected to validation checks. Returns +true+ if the
+      # record could be saved.
+      def increment!(attribute, by = 1)
+        increment(attribute, by).update_attribute(attribute, self[attribute])
+      end
+
+      # Initializes +attribute+ to zero if +nil+ and subtracts the value passed as +by+ (default is 1).
+      # The decrement is performed directly on the underlying attribute, no setter is invoked.
+      # Only makes sense for number-based attributes. Returns +self+.
+      def decrement(attribute, by = 1)
+        self[attribute] ||= 0
+        self[attribute] -= by
+        self
+      end
+
+      # Wrapper around +decrement+ that saves the record. This method differs from
+      # its non-bang version in that it passes through the attribute setter.
+      # Saving is not subjected to validation checks. Returns +true+ if the
+      # record could be saved.
+      def decrement!(attribute, by = 1)
+        decrement(attribute, by).update_attribute(attribute, self[attribute])
+      end
+
+      # Assigns to +attribute+ the boolean opposite of <tt>attribute?</tt>. So
+      # if the predicate returns +true+ the attribute will become +false+. This
+      # method toggles directly the underlying value without calling any setter.
+      # Returns +self+.
+      def toggle(attribute)
+        self[attribute] = !send("#{attribute}?")
+        self
+      end
+
+      # Wrapper around +toggle+ that saves the record. This method differs from
+      # its non-bang version in that it passes through the attribute setter.
+      # Saving is not subjected to validation checks. Returns +true+ if the
+      # record could be saved.
+      def toggle!(attribute)
+        toggle(attribute).update_attribute(attribute, self[attribute])
+      end
+
+      # Reloads the attributes of this object from the database.
+      # The optional options argument is passed to find when reloading so you
+      # may do e.g. record.reload(:lock => true) to reload the same record with
+      # an exclusive row lock.
+      def reload(options = nil)
+        clear_aggregation_cache
+        clear_association_cache
+        @attributes.update(self.class.find(self.id, options).instance_variable_get('@attributes'))
+        @attributes_cache = {}
+        self
+      end
+
+      # Returns the value of the attribute identified by <tt>attr_name</tt> after it has been typecast (for example,
+      # "2004-12-12" in a data column is cast to a date object, like Date.new(2004, 12, 12)).
+      # (Alias for the protected read_attribute method).
+      def [](attr_name)
+        read_attribute(attr_name)
+      end
+
+      # Updates the attribute identified by <tt>attr_name</tt> with the specified +value+.
+      # (Alias for the protected write_attribute method).
+      def []=(attr_name, value)
+        write_attribute(attr_name, value)
+      end
+
+      # Allows you to set all the attributes at once by passing in a hash with keys
+      # matching the attribute names (which again matches the column names).
+      #
+      # If +guard_protected_attributes+ is true (the default), then sensitive
+      # attributes can be protected from this form of mass-assignment by using
+      # the +attr_protected+ macro. Or you can alternatively specify which
+      # attributes *can* be accessed with the +attr_accessible+ macro. Then all the
+      # attributes not included in that won't be allowed to be mass-assigned.
+      #
+      #   class User < ActiveRecord::Base
+      #     attr_protected :is_admin
+      #   end
+      #   
+      #   user = User.new
+      #   user.attributes = { :username => 'Phusion', :is_admin => true }
+      #   user.username   # => "Phusion"
+      #   user.is_admin?  # => false
+      #   
+      #   user.send(:attributes=, { :username => 'Phusion', :is_admin => true }, false)
+      #   user.is_admin?  # => true
+      def attributes=(new_attributes, guard_protected_attributes = true)
+        return if new_attributes.nil?
+        attributes = new_attributes.dup
+        attributes.stringify_keys!
+
+        multi_parameter_attributes = []
+        attributes = remove_attributes_protected_from_mass_assignment(attributes) if guard_protected_attributes
+
+        attributes.each do |k, v|
+          if k.include?("(")
+            multi_parameter_attributes << [ k, v ]
+          else
+            respond_to?(:"#{k}=") ? send(:"#{k}=", v) : raise(UnknownAttributeError, "unknown attribute: #{k}")
+          end
+        end
+
+        assign_multiparameter_attributes(multi_parameter_attributes)
+      end
+
+      # Returns a hash of all the attributes with their names as keys and the values of the attributes as values.
+      def attributes
+        self.attribute_names.inject({}) do |attrs, name|
+          attrs[name] = read_attribute(name)
+          attrs
+        end
+      end
+
+      # Returns a hash of attributes before typecasting and deserialization.
+      def attributes_before_type_cast
+        self.attribute_names.inject({}) do |attrs, name|
+          attrs[name] = read_attribute_before_type_cast(name)
+          attrs
+        end
+      end
+
+      # Returns an <tt>#inspect</tt>-like string for the value of the
+      # attribute +attr_name+. String attributes are elided after 50
+      # characters, and Date and Time attributes are returned in the
+      # <tt>:db</tt> format. Other attributes return the value of
+      # <tt>#inspect</tt> without modification.
+      #
+      #   person = Person.create!(:name => "David Heinemeier Hansson " * 3)
+      #
+      #   person.attribute_for_inspect(:name)
+      #   # => '"David Heinemeier Hansson David Heinemeier Hansson D..."'
+      #
+      #   person.attribute_for_inspect(:created_at)
+      #   # => '"2009-01-12 04:48:57"'
+      def attribute_for_inspect(attr_name)
+        value = read_attribute(attr_name)
+
+        if value.is_a?(String) && value.length > 50
+          "#{value[0..50]}...".inspect
+        elsif value.is_a?(Date) || value.is_a?(Time)
+          %("#{value.to_s(:db)}")
+        else
+          value.inspect
+        end
+      end
+
+      # Returns true if the specified +attribute+ has been set by the user or by a database load and is neither
+      # nil nor empty? (the latter only applies to objects that respond to empty?, most notably Strings).
+      def attribute_present?(attribute)
+        value = read_attribute(attribute)
+        !value.blank?
+      end
+
+      # Returns true if the given attribute is in the attributes hash
+      def has_attribute?(attr_name)
+        @attributes.has_key?(attr_name.to_s)
+      end
+
+      # Returns an array of names for the attributes available on this object sorted alphabetically.
+      def attribute_names
+        @attributes.keys.sort
+      end
+
+      # Returns the column object for the named attribute.
+      def column_for_attribute(name)
+        self.class.columns_hash[name.to_s]
+      end
+
+      # Returns true if the +comparison_object+ is the same object, or is of the same type and has the same id.
+      def ==(comparison_object)
+        comparison_object.equal?(self) ||
+          (comparison_object.instance_of?(self.class) &&
+            comparison_object.id == id &&
+            !comparison_object.new_record?)
+      end
+
+      # Delegates to ==
+      def eql?(comparison_object)
+        self == (comparison_object)
+      end
+
+      # Delegates to id in order to allow two records of the same type and id to work with something like:
+      #   [ Person.find(1), Person.find(2), Person.find(3) ] & [ Person.find(1), Person.find(4) ] # => [ Person.find(1) ]
+      def hash
+        id.hash
+      end
+
+      # Freeze the attributes hash such that associations are still accessible, even on destroyed records.
+      def freeze
+        @attributes.freeze; self
+      end
+
+      # Returns +true+ if the attributes hash has been frozen.
+      def frozen?
+        @attributes.frozen?
+      end
+
+      # Returns +true+ if the record is read only. Records loaded through joins with piggy-back
+      # attributes will be marked as read only since they cannot be saved.
+      def readonly?
+        defined?(@readonly) && @readonly == true
+      end
+
+      # Marks this record as read only.
+      def readonly!
+        @readonly = true
+      end
+
+      # Returns the contents of the record as a nicely formatted string.
+      def inspect
+        attributes_as_nice_string = self.class.column_names.collect { |name|
+          if has_attribute?(name) || new_record?
+            "#{name}: #{attribute_for_inspect(name)}"
+          end
+        }.compact.join(", ")
+        "#<#{self.class} #{attributes_as_nice_string}>"
+      end
+
+    private
+      def create_or_update
+        raise ReadOnlyRecord if readonly?
+        result = new_record? ? create : update
+        result != false
+      end
+
+      # Updates the associated record with values matching those of the instance attributes.
+      # Returns the number of affected rows.
+      def update(attribute_names = @attributes.keys)
+        quoted_attributes = attributes_with_quotes(false, false, attribute_names)
+        return 0 if quoted_attributes.empty?
+        connection.update(
+          "UPDATE #{self.class.quoted_table_name} " +
+          "SET #{quoted_comma_pair_list(connection, quoted_attributes)} " +
+          "WHERE #{connection.quote_column_name(self.class.primary_key)} = #{quote_value(id)}",
+          "#{self.class.name} Update"
+        )
+      end
+
+      # Creates a record with values matching those of the instance attributes
+      # and returns its id.
+      def create
+        if self.id.nil? && connection.prefetch_primary_key?(self.class.table_name)
+          self.id = connection.next_sequence_value(self.class.sequence_name)
+        end
+
+        quoted_attributes = attributes_with_quotes
+
+        statement = if quoted_attributes.empty?
+          connection.empty_insert_statement(self.class.table_name)
+        else
+          "INSERT INTO #{self.class.quoted_table_name} " +
+          "(#{quoted_column_names.join(', ')}) " +
+          "VALUES(#{quoted_attributes.values.join(', ')})"
+        end
+
+        self.id = connection.insert(statement, "#{self.class.name} Create",
+          self.class.primary_key, self.id, self.class.sequence_name)
+
+        @new_record = false
+        id
+      end
+
+      # Sets the attribute used for single table inheritance to this class name if this is not the ActiveRecord::Base descendant.
+      # Considering the hierarchy Reply < Message < ActiveRecord::Base, this makes it possible to do Reply.new without having to
+      # set <tt>Reply[Reply.inheritance_column] = "Reply"</tt> yourself. No such attribute would be set for objects of the
+      # Message class in that example.
+      def ensure_proper_type
+        unless self.class.descends_from_active_record?
+          write_attribute(self.class.inheritance_column, self.class.sti_name)
+        end
+      end
+
+      def convert_number_column_value(value)
+        if value == false
+          0
+        elsif value == true
+          1
+        elsif value.is_a?(String) && value.blank?
+          nil
+        else
+          value
+        end
+      end
+
+      def remove_attributes_protected_from_mass_assignment(attributes)
+        safe_attributes =
+          if self.class.accessible_attributes.nil? && self.class.protected_attributes.nil?
+            attributes.reject { |key, value| attributes_protected_by_default.include?(key.gsub(/\(.+/, "")) }
+          elsif self.class.protected_attributes.nil?
+            attributes.reject { |key, value| !self.class.accessible_attributes.include?(key.gsub(/\(.+/, "")) || attributes_protected_by_default.include?(key.gsub(/\(.+/, "")) }
+          elsif self.class.accessible_attributes.nil?
+            attributes.reject { |key, value| self.class.protected_attributes.include?(key.gsub(/\(.+/,"")) || attributes_protected_by_default.include?(key.gsub(/\(.+/, "")) }
+          else
+            raise "Declare either attr_protected or attr_accessible for #{self.class}, but not both."
+          end
+
+        removed_attributes = attributes.keys - safe_attributes.keys
+
+        if removed_attributes.any?
+          log_protected_attribute_removal(removed_attributes)
+        end
+
+        safe_attributes
+      end
+
+      # Removes attributes which have been marked as readonly.
+      def remove_readonly_attributes(attributes)
+        unless self.class.readonly_attributes.nil?
+          attributes.delete_if { |key, value| self.class.readonly_attributes.include?(key.gsub(/\(.+/,"")) }
+        else
+          attributes
+        end
+      end
+
+      def log_protected_attribute_removal(*attributes)
+        logger.debug "WARNING: Can't mass-assign these protected attributes: #{attributes.join(', ')}"
+      end
+
+      # The primary key and inheritance column can never be set by mass-assignment for security reasons.
+      def attributes_protected_by_default
+        default = [ self.class.primary_key, self.class.inheritance_column ]
+        default << 'id' unless self.class.primary_key.eql? 'id'
+        default
+      end
+
+      # Returns a copy of the attributes hash where all the values have been safely quoted for use in
+      # an SQL statement.
+      def attributes_with_quotes(include_primary_key = true, include_readonly_attributes = true, attribute_names = @attributes.keys)
+        quoted = {}
+        connection = self.class.connection
+        attribute_names.each do |name|
+          if (column = column_for_attribute(name)) && (include_primary_key || !column.primary)
+            value = read_attribute(name)
+
+            # We need explicit to_yaml because quote() does not properly convert Time/Date fields to YAML.
+            if value && self.class.serialized_attributes.has_key?(name) && (value.acts_like?(:date) || value.acts_like?(:time))
+              value = value.to_yaml
+            end
+
+            quoted[name] = connection.quote(value, column)
+          end
+        end
+        include_readonly_attributes ? quoted : remove_readonly_attributes(quoted)
+      end
+
+      # Quote strings appropriately for SQL statements.
+      def quote_value(value, column = nil)
+        self.class.connection.quote(value, column)
+      end
+
+      # Interpolate custom SQL string in instance context.
+      # Optional record argument is meant for custom insert_sql.
+      def interpolate_sql(sql, record = nil)
+        instance_eval("%@#{sql.gsub('@', '\@')}@")
+      end
+
+      # Initializes the attributes array with keys matching the columns from the linked table and
+      # the values matching the corresponding default value of that column, so
+      # that a new instance, or one populated from a passed-in Hash, still has all the attributes
+      # that instances loaded from the database would.
+      def attributes_from_column_definition
+        self.class.columns.inject({}) do |attributes, column|
+          attributes[column.name] = column.default unless column.name == self.class.primary_key
+          attributes
+        end
+      end
+
+      # Instantiates objects for all attribute classes that needs more than one constructor parameter. This is done
+      # by calling new on the column type or aggregation type (through composed_of) object with these parameters.
+      # So having the pairs written_on(1) = "2004", written_on(2) = "6", written_on(3) = "24", will instantiate
+      # written_on (a date type) with Date.new("2004", "6", "24"). You can also specify a typecast character in the
+      # parentheses to have the parameters typecasted before they're used in the constructor. Use i for Fixnum, f for Float,
+      # s for String, and a for Array. If all the values for a given attribute are empty, the attribute will be set to nil.
+      def assign_multiparameter_attributes(pairs)
+        execute_callstack_for_multiparameter_attributes(
+          extract_callstack_for_multiparameter_attributes(pairs)
+        )
+      end
+
+      def instantiate_time_object(name, values)
+        if self.class.send(:create_time_zone_conversion_attribute?, name, column_for_attribute(name))
+          Time.zone.local(*values)
+        else
+          Time.time_with_datetime_fallback(@@default_timezone, *values)
+        end
+      end
+
+      def execute_callstack_for_multiparameter_attributes(callstack)
+        errors = []
+        callstack.each do |name, values|
+          klass = (self.class.reflect_on_aggregation(name.to_sym) || column_for_attribute(name)).klass
+          if values.empty?
+            send(name + "=", nil)
+          else
+            begin
+              value = if Time == klass
+                instantiate_time_object(name, values)
+              elsif Date == klass
+                begin
+                  Date.new(*values)
+                rescue ArgumentError => ex # if Date.new raises an exception on an invalid date
+                  instantiate_time_object(name, values).to_date # we instantiate Time object and convert it back to a date thus using Time's logic in handling invalid dates
+                end
+              else
+                klass.new(*values)
+              end
+
+              send(name + "=", value)
+            rescue => ex
+              errors << AttributeAssignmentError.new("error on assignment #{values.inspect} to #{name}", ex, name)
+            end
+          end
+        end
+        unless errors.empty?
+          raise MultiparameterAssignmentErrors.new(errors), "#{errors.size} error(s) on assignment of multiparameter attributes"
+        end
+      end
+
+      def extract_callstack_for_multiparameter_attributes(pairs)
+        attributes = { }
+
+        for pair in pairs
+          multiparameter_name, value = pair
+          attribute_name = multiparameter_name.split("(").first
+          attributes[attribute_name] = [] unless attributes.include?(attribute_name)
+
+          unless value.empty?
+            attributes[attribute_name] <<
+              [ find_parameter_position(multiparameter_name), type_cast_attribute_value(multiparameter_name, value) ]
+          end
+        end
+
+        attributes.each { |name, values| attributes[name] = values.sort_by{ |v| v.first }.collect { |v| v.last } }
+      end
+
+      def type_cast_attribute_value(multiparameter_name, value)
+        multiparameter_name =~ /\([0-9]*([a-z])\)/ ? value.send("to_" + $1) : value
+      end
+
+      def find_parameter_position(multiparameter_name)
+        multiparameter_name.scan(/\(([0-9]*).*\)/).first.first
+      end
+
+      # Returns a comma-separated pair list, like "key1 = val1, key2 = val2".
+      def comma_pair_list(hash)
+        hash.inject([]) { |list, pair| list << "#{pair.first} = #{pair.last}" }.join(", ")
+      end
+
+      def quoted_column_names(attributes = attributes_with_quotes)
+        connection = self.class.connection
+        attributes.keys.collect do |column_name|
+          connection.quote_column_name(column_name)
+        end
+      end
+
+      def self.quoted_table_name
+        self.connection.quote_table_name(self.table_name)
+      end
+
+      def quote_columns(quoter, hash)
+        hash.inject({}) do |quoted, (name, value)|
+          quoted[quoter.quote_column_name(name)] = value
+          quoted
+        end
+      end
+
+      def quoted_comma_pair_list(quoter, hash)
+        comma_pair_list(quote_columns(quoter, hash))
+      end
+
+      def object_from_yaml(string)
+        return string unless string.is_a?(String) && string =~ /^---/
+        YAML::load(string) rescue string
+      end
+
+      def clone_attributes(reader_method = :read_attribute, attributes = {})
+        self.attribute_names.inject(attributes) do |attrs, name|
+          attrs[name] = clone_attribute_value(reader_method, name)
+          attrs
+        end
+      end
+
+      def clone_attribute_value(reader_method, attribute_name)
+        value = send(reader_method, attribute_name)
+        value.duplicable? ? value.clone : value
+      rescue TypeError, NoMethodError
+        value
+      end
+  end
+
+  Base.class_eval do
+    extend QueryCache::ClassMethods
+    include Validations
+    include Locking::Optimistic, Locking::Pessimistic
+    include AttributeMethods
+    include Dirty
+    include Callbacks, Observing, Timestamp
+    include Associations, AssociationPreload, NamedScope
+
+    # AutosaveAssociation needs to be included before Transactions, because we want
+    # #save_with_autosave_associations to be wrapped inside a transaction.
+    include AutosaveAssociation, NestedAttributes
+
+    include Aggregations, Transactions, Reflection, Batches, Calculations, Serialization
+  end
+end
+
+# TODO: Remove this and make it work with LAZY flag
+require 'active_record/connection_adapters/abstract_adapter'