wasmtime 24.0.0 → 25.0.1

data/ext/cargo-vendor/wasmtime-wasi-24.0.0/wit/deps/sockets/udp.wit

@@ -1,266 +0,0 @@
-
-interface udp {
-    use wasi:io/poll@0.2.0.{pollable};
-    use network.{network, error-code, ip-socket-address, ip-address-family};
-
-    /// A received datagram.
-    record incoming-datagram {
-        /// The payload.
-        /// 
-        /// Theoretical max size: ~64 KiB. In practice, typically less than 1500 bytes.
-        data: list<u8>,
-
-        /// The source address.
-        ///
-        /// This field is guaranteed to match the remote address the stream was initialized with, if any.
-        ///
-        /// Equivalent to the `src_addr` out parameter of `recvfrom`.
-        remote-address: ip-socket-address,
-    }
-
-    /// A datagram to be sent out.
-    record outgoing-datagram {
-        /// The payload.
-        data: list<u8>,
-
-        /// The destination address.
-        ///
-        /// The requirements on this field depend on how the stream was initialized:
-        /// - with a remote address: this field must be None or match the stream's remote address exactly.
-        /// - without a remote address: this field is required.
-        ///
-        /// If this value is None, the send operation is equivalent to `send` in POSIX. Otherwise it is equivalent to `sendto`.
-        remote-address: option<ip-socket-address>,
-    }
-
-
-
-    /// A UDP socket handle.
-    resource udp-socket {
-        /// Bind the socket to a specific network on the provided IP address and port.
-        ///
-        /// If the IP address is zero (`0.0.0.0` in IPv4, `::` in IPv6), it is left to the implementation to decide which
-        /// network interface(s) to bind to.
-        /// If the port is zero, the socket will be bound to a random free port.
-        ///
-        /// # Typical errors
-        /// - `invalid-argument`:          The `local-address` has the wrong address family. (EAFNOSUPPORT, EFAULT on Windows)
-        /// - `invalid-state`:             The socket is already bound. (EINVAL)
-        /// - `address-in-use`:            No ephemeral ports available. (EADDRINUSE, ENOBUFS on Windows)
-        /// - `address-in-use`:            Address is already in use. (EADDRINUSE)
-        /// - `address-not-bindable`:      `local-address` is not an address that the `network` can bind to. (EADDRNOTAVAIL)
-        /// - `not-in-progress`:           A `bind` operation is not in progress.
-        /// - `would-block`:               Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN)
-        ///
-        /// # Implementors note
-        /// Unlike in POSIX, in WASI the bind operation is async. This enables
-        /// interactive WASI hosts to inject permission prompts. Runtimes that
-        /// don't want to make use of this ability can simply call the native
-        /// `bind` as part of either `start-bind` or `finish-bind`.
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/bind.html>
-        /// - <https://man7.org/linux/man-pages/man2/bind.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-bind>
-        /// - <https://man.freebsd.org/cgi/man.cgi?query=bind&sektion=2&format=html>
-        start-bind: func(network: borrow<network>, local-address: ip-socket-address) -> result<_, error-code>;
-        finish-bind: func() -> result<_, error-code>;
-
-        /// Set up inbound & outbound communication channels, optionally to a specific peer.
-        ///
-        /// This function only changes the local socket configuration and does not generate any network traffic.
-        /// On success, the `remote-address` of the socket is updated. The `local-address` may be updated as well,
-        /// based on the best network path to `remote-address`.
-        ///
-        /// When a `remote-address` is provided, the returned streams are limited to communicating with that specific peer:
-        /// - `send` can only be used to send to this destination.
-        /// - `receive` will only return datagrams sent from the provided `remote-address`.
-        ///
-        /// This method may be called multiple times on the same socket to change its association, but
-        /// only the most recently returned pair of streams will be operational. Implementations may trap if
-        /// the streams returned by a previous invocation haven't been dropped yet before calling `stream` again.
-        /// 
-        /// The POSIX equivalent in pseudo-code is:
-        /// ```text
-        /// if (was previously connected) {
-        /// 	connect(s, AF_UNSPEC)
-        /// }
-        /// if (remote_address is Some) {
-        /// 	connect(s, remote_address)
-        /// }
-        /// ```
-        ///
-        /// Unlike in POSIX, the socket must already be explicitly bound.
-        /// 
-        /// # Typical errors
-        /// - `invalid-argument`:          The `remote-address` has the wrong address family. (EAFNOSUPPORT)
-        /// - `invalid-argument`:          The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EDESTADDRREQ, EADDRNOTAVAIL)
-        /// - `invalid-argument`:          The port in `remote-address` is set to 0. (EDESTADDRREQ, EADDRNOTAVAIL)
-        /// - `invalid-state`:             The socket is not bound.
-        /// - `address-in-use`:            Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE, EADDRNOTAVAIL on Linux, EAGAIN on BSD)
-        /// - `remote-unreachable`:        The remote address is not reachable. (ECONNRESET, ENETRESET, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
-        /// - `connection-refused`:        The connection was refused. (ECONNREFUSED)
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html>
-        /// - <https://man7.org/linux/man-pages/man2/connect.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-connect>
-        /// - <https://man.freebsd.org/cgi/man.cgi?connect>
-        %stream: func(remote-address: option<ip-socket-address>) -> result<tuple<incoming-datagram-stream, outgoing-datagram-stream>, error-code>;
-
-        /// Get the current bound address.
-        ///
-        /// POSIX mentions:
-        /// > If the socket has not been bound to a local name, the value
-        /// > stored in the object pointed to by `address` is unspecified.
-        ///
-        /// WASI is stricter and requires `local-address` to return `invalid-state` when the socket hasn't been bound yet.
-        /// 
-        /// # Typical errors
-        /// - `invalid-state`: The socket is not bound to any local address.
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getsockname.html>
-        /// - <https://man7.org/linux/man-pages/man2/getsockname.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getsockname>
-        /// - <https://man.freebsd.org/cgi/man.cgi?getsockname>
-        local-address: func() -> result<ip-socket-address, error-code>;
-
-        /// Get the address the socket is currently streaming to.
-        ///
-        /// # Typical errors
-        /// - `invalid-state`: The socket is not streaming to a specific remote address. (ENOTCONN)
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getpeername.html>
-        /// - <https://man7.org/linux/man-pages/man2/getpeername.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getpeername>
-        /// - <https://man.freebsd.org/cgi/man.cgi?query=getpeername&sektion=2&n=1>
-        remote-address: func() -> result<ip-socket-address, error-code>;
-
-        /// Whether this is a IPv4 or IPv6 socket.
-        ///
-        /// Equivalent to the SO_DOMAIN socket option.
-        address-family: func() -> ip-address-family;
-
-        /// Equivalent to the IP_TTL & IPV6_UNICAST_HOPS socket options.
-        ///
-        /// If the provided value is 0, an `invalid-argument` error is returned.
-        ///
-        /// # Typical errors
-        /// - `invalid-argument`:     (set) The TTL value must be 1 or higher.
-        unicast-hop-limit: func() -> result<u8, error-code>;
-        set-unicast-hop-limit: func(value: u8) -> result<_, error-code>;
-
-        /// The kernel buffer space reserved for sends/receives on this socket.
-        ///
-        /// If the provided value is 0, an `invalid-argument` error is returned.
-        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
-        /// I.e. after setting a value, reading the same setting back may return a different value.
-        ///
-        /// Equivalent to the SO_RCVBUF and SO_SNDBUF socket options.
-        ///
-        /// # Typical errors
-        /// - `invalid-argument`:     (set) The provided value was 0.
-        receive-buffer-size: func() -> result<u64, error-code>;
-        set-receive-buffer-size: func(value: u64) -> result<_, error-code>;
-        send-buffer-size: func() -> result<u64, error-code>;
-        set-send-buffer-size: func(value: u64) -> result<_, error-code>;
-
-        /// Create a `pollable` which will resolve once the socket is ready for I/O.
-        ///
-        /// Note: this function is here for WASI Preview2 only.
-        /// It's planned to be removed when `future` is natively supported in Preview3.
-        subscribe: func() -> pollable;
-    }
-
-    resource incoming-datagram-stream {
-        /// Receive messages on the socket.
-        ///
-        /// This function attempts to receive up to `max-results` datagrams on the socket without blocking.
-        /// The returned list may contain fewer elements than requested, but never more.
-        ///
-        /// This function returns successfully with an empty list when either:
-        /// - `max-results` is 0, or:
-        /// - `max-results` is greater than 0, but no results are immediately available.
-        /// This function never returns `error(would-block)`.
-        ///
-        /// # Typical errors
-        /// - `remote-unreachable`: The remote address is not reachable. (ECONNRESET, ENETRESET on Windows, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
-        /// - `connection-refused`: The connection was refused. (ECONNREFUSED)
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvfrom.html>
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvmsg.html>
-        /// - <https://man7.org/linux/man-pages/man2/recv.2.html>
-        /// - <https://man7.org/linux/man-pages/man2/recvmmsg.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-recv>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-recvfrom>
-        /// - <https://learn.microsoft.com/en-us/previous-versions/windows/desktop/legacy/ms741687(v=vs.85)>
-        /// - <https://man.freebsd.org/cgi/man.cgi?query=recv&sektion=2>
-        receive: func(max-results: u64) -> result<list<incoming-datagram>, error-code>;
-
-        /// Create a `pollable` which will resolve once the stream is ready to receive again.
-        ///
-        /// Note: this function is here for WASI Preview2 only.
-        /// It's planned to be removed when `future` is natively supported in Preview3.
-        subscribe: func() -> pollable;
-    }
-
-    resource outgoing-datagram-stream {
-        /// Check readiness for sending. This function never blocks.
-        ///
-        /// Returns the number of datagrams permitted for the next call to `send`,
-        /// or an error. Calling `send` with more datagrams than this function has
-        /// permitted will trap.
-        ///
-        /// When this function returns ok(0), the `subscribe` pollable will
-        /// become ready when this function will report at least ok(1), or an
-        /// error.
-        /// 
-        /// Never returns `would-block`.
-        check-send: func() -> result<u64, error-code>;
-
-        /// Send messages on the socket.
-        ///
-        /// This function attempts to send all provided `datagrams` on the socket without blocking and
-        /// returns how many messages were actually sent (or queued for sending). This function never
-        /// returns `error(would-block)`. If none of the datagrams were able to be sent, `ok(0)` is returned.
-        ///
-        /// This function semantically behaves the same as iterating the `datagrams` list and sequentially
-        /// sending each individual datagram until either the end of the list has been reached or the first error occurred.
-        /// If at least one datagram has been sent successfully, this function never returns an error.
-        ///
-        /// If the input list is empty, the function returns `ok(0)`.
-        ///
-        /// Each call to `send` must be permitted by a preceding `check-send`. Implementations must trap if
-        /// either `check-send` was not called or `datagrams` contains more items than `check-send` permitted.
-        ///
-        /// # Typical errors
-        /// - `invalid-argument`:        The `remote-address` has the wrong address family. (EAFNOSUPPORT)
-        /// - `invalid-argument`:        The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EDESTADDRREQ, EADDRNOTAVAIL)
-        /// - `invalid-argument`:        The port in `remote-address` is set to 0. (EDESTADDRREQ, EADDRNOTAVAIL)
-        /// - `invalid-argument`:        The socket is in "connected" mode and `remote-address` is `some` value that does not match the address passed to `stream`. (EISCONN)
-        /// - `invalid-argument`:        The socket is not "connected" and no value for `remote-address` was provided. (EDESTADDRREQ)
-        /// - `remote-unreachable`:      The remote address is not reachable. (ECONNRESET, ENETRESET on Windows, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
-        /// - `connection-refused`:      The connection was refused. (ECONNREFUSED)
-        /// - `datagram-too-large`:      The datagram is too large. (EMSGSIZE)
-        ///
-        /// # References
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/sendto.html>
-        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/sendmsg.html>
-        /// - <https://man7.org/linux/man-pages/man2/send.2.html>
-        /// - <https://man7.org/linux/man-pages/man2/sendmmsg.2.html>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-send>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-sendto>
-        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-wsasendmsg>
-        /// - <https://man.freebsd.org/cgi/man.cgi?query=send&sektion=2>
-        send: func(datagrams: list<outgoing-datagram>) -> result<u64, error-code>;
-        
-        /// Create a `pollable` which will resolve once the stream is ready to send again.
-        ///
-        /// Note: this function is here for WASI Preview2 only.
-        /// It's planned to be removed when `future` is natively supported in Preview3.
-        subscribe: func() -> pollable;
-    }
-}

data/ext/cargo-vendor/wasmtime-wasi-24.0.0/wit/deps/sockets/world.wit

@@ -1,11 +0,0 @@
-package wasi:sockets@0.2.0;
-
-world imports {
-    import instance-network;
-    import network;
-    import udp;
-    import udp-create-socket;
-    import tcp;
-    import tcp-create-socket;
-    import ip-name-lookup;
-}

data/ext/cargo-vendor/wasmtime-wasi-24.0.0/wit/test.wit

@@ -1,22 +0,0 @@
-package wasmtime:wasi;
-
-// only used as part of `test-programs`
-world test-reactor {
-  include wasi:cli/imports@0.2.0;
-
-  export add-strings: func(s: list<string>) -> u32;
-  export get-strings: func() -> list<string>;
-
-  use wasi:io/streams@0.2.0.{output-stream};
-
-  export write-strings-to: func(o: output-stream) -> result;
-
-  use wasi:filesystem/types@0.2.0.{descriptor-stat};
-  export pass-an-imported-record: func(d: descriptor-stat) -> string;
-}
-
-world test-command {
-  include wasi:cli/imports@0.2.0;
-  import wasi:http/types@0.2.0;
-  import wasi:http/outgoing-handler@0.2.0;
-}

data/ext/cargo-vendor/wasmtime-winch-24.0.0/.cargo-checksum.json

@@ -1 +0,0 @@
-{"files":{"Cargo.toml":"7606fcd44ee779bda88e665f889b07ca12e2d8f2e3d7340b07037c72f946dcb3","LICENSE":"a6c48161a09acc75a0e25503bab66a731eb5fba5392ed4bb4743e4ba5085327a","src/builder.rs":"e9aed3352b2dffae8091cdbc5ef2e2a17da5f822779fccdb2b459b919a91286a","src/compiler.rs":"cf97c1101732288299cb69548490aa970cb64511e926482efa9b92dfe6c5d83c","src/lib.rs":"af1ae41ca004ba001c133bc39d3d148377d6c986ca9dbe2775c8681d8d244e9f"},"package":"2a25199625effa4c13dd790d64bd56884b014c69829431bfe43991c740bd5bc1"}

data/ext/cargo-vendor/wasmtime-winch-24.0.0/Cargo.toml

@@ -1,99 +0,0 @@
-# THIS FILE IS AUTOMATICALLY GENERATED BY CARGO
-#
-# When uploading crates to the registry Cargo will automatically
-# "normalize" Cargo.toml files for maximal compatibility
-# with all versions of Cargo and also rewrite `path` dependencies
-# to registry (e.g., crates.io) dependencies.
-#
-# If you are reading this file be aware that the original Cargo.toml
-# will likely look very different (and much more reasonable).
-# See Cargo.toml.orig for the original contents.
-
-[package]
-edition = "2021"
-name = "wasmtime-winch"
-version = "24.0.0"
-authors = ["The Wasmtime Project Developers"]
-build = false
-autobins = false
-autoexamples = false
-autotests = false
-autobenches = false
-description = "Integration between Wasmtime and Winch"
-readme = false
-license = "Apache-2.0 WITH LLVM-exception"
-repository = "https://github.com/bytecodealliance/wasmtime"
-
-[lib]
-name = "wasmtime_winch"
-path = "src/lib.rs"
-
-[dependencies.anyhow]
-version = "1.0.22"
-default-features = false
-
-[dependencies.cranelift-codegen]
-version = "0.111.0"
-features = [
-    "std",
-    "unwind",
-    "trace-log",
-]
-default-features = false
-
-[dependencies.gimli]
-version = "0.29.0"
-features = [
-    "read",
-    "std",
-]
-default-features = false
-
-[dependencies.object]
-version = "0.36"
-features = [
-    "read_core",
-    "elf",
-    "std",
-]
-default-features = false
-
-[dependencies.target-lexicon]
-version = "0.12.16"
-
-[dependencies.wasmparser]
-version = "0.215.0"
-default-features = false
-
-[dependencies.wasmtime-cranelift]
-version = "=24.0.0"
-
-[dependencies.wasmtime-environ]
-version = "=24.0.0"
-
-[dependencies.winch-codegen]
-version = "=0.22.0"
-
-[features]
-all-arch = ["winch-codegen/all-arch"]
-component-model = [
-    "wasmtime-environ/component-model",
-    "wasmtime-cranelift/component-model",
-]
-
-[lints.clippy]
-clone_on_copy = "warn"
-manual_strip = "warn"
-map_clone = "warn"
-unnecessary_to_owned = "warn"
-
-[lints.clippy.all]
-level = "allow"
-priority = -1
-
-[lints.rust]
-trivial_numeric_casts = "warn"
-unstable_features = "warn"
-unused-lifetimes = "warn"
-unused_extern_crates = "warn"
-unused_import_braces = "warn"

data/ext/cargo-vendor/wasmtime-wit-bindgen-24.0.0/.cargo-checksum.json

@@ -1 +0,0 @@
-{"files":{"Cargo.toml":"d5ca9e9d826f1d3dba230979bd8b3220916adbd310375155643d6d019f1c21fe","src/lib.rs":"09eeda2c65eaf5614d7ab78ecd8ad99cc40d5dab6052d30f4759bfe66e228b54","src/rust.rs":"0cc677de8c8f530c3372d56d77a8d77d7ac6bc8a206983edd79d239ad5b13ddf","src/source.rs":"91baa5428613f797af37784d73fe04cbad1afaf2f95bed66606adfde6fe5e214","src/types.rs":"084ad46a884a53ae820970ff5a1d0179f65f8c15e906fb31cbb2ded257cbd9b3"},"package":"3cb331ac7ed1d5ba49cddcdb6b11973752a857148858bb308777d2fc5584121f"}

data/ext/cargo-vendor/wasmtime-wit-bindgen-24.0.0/Cargo.toml

@@ -1,64 +0,0 @@
-# THIS FILE IS AUTOMATICALLY GENERATED BY CARGO
-#
-# When uploading crates to the registry Cargo will automatically
-# "normalize" Cargo.toml files for maximal compatibility
-# with all versions of Cargo and also rewrite `path` dependencies
-# to registry (e.g., crates.io) dependencies.
-#
-# If you are reading this file be aware that the original Cargo.toml
-# will likely look very different (and much more reasonable).
-# See Cargo.toml.orig for the original contents.
-
-[package]
-edition = "2021"
-name = "wasmtime-wit-bindgen"
-version = "24.0.0"
-authors = ["The Wasmtime Project Developers"]
-build = false
-autobins = false
-autoexamples = false
-autotests = false
-autobenches = false
-description = "Internal `*.wit` support for the `wasmtime` crate's macros"
-documentation = "https://docs.rs/wasmtime-wit-bindgen/"
-readme = false
-license = "Apache-2.0 WITH LLVM-exception"
-repository = "https://github.com/bytecodealliance/wasmtime"
-
-[lib]
-name = "wasmtime_wit_bindgen"
-path = "src/lib.rs"
-
-[dependencies.anyhow]
-version = "1.0.22"
-default-features = false
-
-[dependencies.heck]
-version = "0.4"
-
-[dependencies.indexmap]
-version = "2.0.0"
-default-features = false
-
-[dependencies.wit-parser]
-version = "0.215.0"
-
-[features]
-std = []
-
-[lints.clippy]
-clone_on_copy = "warn"
-manual_strip = "warn"
-map_clone = "warn"
-unnecessary_to_owned = "warn"
-
-[lints.clippy.all]
-level = "allow"
-priority = -1
-
-[lints.rust]
-trivial_numeric_casts = "warn"
-unstable_features = "warn"
-unused-lifetimes = "warn"
-unused_extern_crates = "warn"
-unused_import_braces = "warn"