vagrant-unbundled 2.2.2.0 → 2.2.3.0

data/vendor/bundle/ruby/2.5.0/gems/net-ssh-5.1.0/lib/net/ssh/buffered_io.rb

@@ -0,0 +1,204 @@
+require 'net/ssh/buffer'
+require 'net/ssh/loggable'
+require 'net/ssh/ruby_compat'
+
+module Net 
+  module SSH
+
+    # This module is used to extend sockets and other IO objects, to allow
+    # them to be buffered for both read and write. This abstraction makes it
+    # quite easy to write a select-based event loop
+    # (see Net::SSH::Connection::Session#listen_to).
+    #
+    # The general idea is that instead of calling #read directly on an IO that
+    # has been extended with this module, you call #fill (to add pending input
+    # to the internal read buffer), and then #read_available (to read from that
+    # buffer). Likewise, you don't call #write directly, you call #enqueue to
+    # add data to the write buffer, and then #send_pending or #wait_for_pending_sends
+    # to actually send the data across the wire.
+    #
+    # In this way you can easily use the object as an argument to IO.select,
+    # calling #fill when it is available for read, or #send_pending when it is
+    # available for write, and then call #enqueue and #read_available during
+    # the idle times.
+    #
+    #   socket = TCPSocket.new(address, port)
+    #   socket.extend(Net::SSH::BufferedIo)
+    #
+    #   ssh.listen_to(socket)
+    #
+    #   ssh.loop do
+    #     if socket.available > 0
+    #       puts socket.read_available
+    #       socket.enqueue("response\n")
+    #     end
+    #   end
+    #
+    # Note that this module must be used to extend an instance, and should not
+    # be included in a class. If you do want to use it via an include, then you
+    # must make sure to invoke the private #initialize_buffered_io method in
+    # your class' #initialize method:
+    #
+    #   class Foo < IO
+    #     include Net::SSH::BufferedIo
+    #
+    #     def initialize
+    #       initialize_buffered_io
+    #       # ...
+    #     end
+    #   end
+    module BufferedIo
+      include Loggable
+  
+      # Called when the #extend is called on an object, with this module as the
+      # argument. It ensures that the modules instance variables are all properly
+      # initialized.
+      def self.extended(object) #:nodoc:
+        # need to use __send__ because #send is overridden in Socket
+        object.__send__(:initialize_buffered_io)
+      end
+  
+      # Tries to read up to +n+ bytes of data from the remote end, and appends
+      # the data to the input buffer. It returns the number of bytes read, or 0
+      # if no data was available to be read.
+      def fill(n=8192)
+        input.consume!
+        data = recv(n)
+        debug { "read #{data.length} bytes" }
+        input.append(data)
+        return data.length
+      rescue EOFError => e
+        @input_errors << e
+        return 0
+      end
+  
+      # Read up to +length+ bytes from the input buffer. If +length+ is nil,
+      # all available data is read from the buffer. (See #available.)
+      def read_available(length=nil)
+        input.read(length || available)
+      end
+  
+      # Returns the number of bytes available to be read from the input buffer.
+      # (See #read_available.)
+      def available
+        input.available
+      end
+  
+      # Enqueues data in the output buffer, to be written when #send_pending
+      # is called. Note that the data is _not_ sent immediately by this method!
+      def enqueue(data)
+        output.append(data)
+      end
+  
+      # Returns +true+ if there is data waiting in the output buffer, and
+      # +false+ otherwise.
+      def pending_write?
+        output.length > 0
+      end
+  
+      # Sends as much of the pending output as possible. Returns +true+ if any
+      # data was sent, and +false+ otherwise.
+      def send_pending
+        if output.length > 0
+          sent = send(output.to_s, 0)
+          debug { "sent #{sent} bytes" }
+          output.consume!(sent)
+          return sent > 0
+        else
+          return false
+        end
+      end
+  
+      # Calls #send_pending repeatedly, if necessary, blocking until the output
+      # buffer is empty.
+      def wait_for_pending_sends
+        send_pending
+        while output.length > 0
+          result = IO.select(nil, [self]) or next
+          next unless result[1].any?
+          send_pending
+        end
+      end
+  
+      public # these methods are primarily for use in tests
+  
+      def write_buffer #:nodoc:
+        output.to_s
+      end
+  
+      def read_buffer #:nodoc:
+        input.to_s
+      end
+  
+      private
+  
+      #--
+      # Can't use attr_reader here (after +private+) without incurring the
+      # wrath of "ruby -w". We hates it.
+      #++
+  
+      def input; @input; end
+
+      def output; @output; end
+  
+      # Initializes the intput and output buffers for this object. This method
+      # is called automatically when the module is mixed into an object via
+      # Object#extend (see Net::SSH::BufferedIo.extended), but must be called
+      # explicitly in the +initialize+ method of any class that uses
+      # Module#include to add this module.
+      def initialize_buffered_io
+        @input = Net::SSH::Buffer.new
+        @input_errors = []
+        @output = Net::SSH::Buffer.new
+        @output_errors = []
+      end
+    end
+
+    # Fixes for two issues by Miklós Fazekas:
+    #
+    #   * if client closes a forwarded connection, but the server is
+    #     reading, net-ssh terminates with IOError socket closed.
+    #   * if client force closes (RST) a forwarded connection, but
+    #     server is reading, net-ssh terminates with [an exception]
+    #
+    # See:
+    #
+    #    http://net-ssh.lighthouseapp.com/projects/36253/tickets/7
+    #    http://github.com/net-ssh/net-ssh/tree/portfwfix
+    #
+    module ForwardedBufferedIo
+      def fill(n=8192)
+        begin
+          super(n)
+        rescue Errno::ECONNRESET => e
+          debug { "connection was reset => shallowing exception:#{e}" }
+          return 0
+        rescue IOError => e
+          if e.message =~ /closed/ then
+            debug { "connection was reset => shallowing exception:#{e}" }
+            return 0
+          else
+            raise
+          end
+        end
+      end
+  
+      def send_pending
+        begin
+          super
+        rescue Errno::ECONNRESET => e
+          debug { "connection was reset => shallowing exception:#{e}" }
+          return 0
+        rescue IOError => e
+          if e.message =~ /closed/ then
+            debug { "connection was reset => shallowing exception:#{e}" }
+            return 0
+          else
+            raise
+          end
+        end
+      end
+    end
+
+  end
+end

data/vendor/bundle/ruby/2.5.0/gems/net-ssh-5.1.0/lib/net/ssh/config.rb

@@ -0,0 +1,372 @@
+module Net
+  module SSH
+
+    # The Net::SSH::Config class is used to parse OpenSSH configuration files,
+    # and translates that syntax into the configuration syntax that Net::SSH
+    # understands. This lets Net::SSH scripts read their configuration (to
+    # some extent) from OpenSSH configuration files (~/.ssh/config, /etc/ssh_config,
+    # and so forth).
+    #
+    # Only a subset of OpenSSH configuration options are understood:
+    #
+    # * ChallengeResponseAuthentication => maps to the :auth_methods option challenge-response (then coleasced into keyboard-interactive)
+    # * KbdInteractiveAuthentication => maps to the :auth_methods keyboard-interactive
+    # * Ciphers => maps to the :encryption option
+    # * Compression => :compression
+    # * CompressionLevel => :compression_level
+    # * ConnectTimeout => maps to the :timeout option
+    # * ForwardAgent => :forward_agent
+    # * GlobalKnownHostsFile => :global_known_hosts_file
+    # * HostBasedAuthentication => maps to the :auth_methods option
+    # * HostKeyAlgorithms => maps to :host_key option
+    # * HostKeyAlias => :host_key_alias
+    # * HostName => :host_name
+    # * IdentityFile => maps to the :keys option
+    # * IdentityAgent => :identity_agent
+    # * IdentitiesOnly => :keys_only
+    # * Macs => maps to the :hmac option
+    # * PasswordAuthentication => maps to the :auth_methods option password
+    # * Port => :port
+    # * PreferredAuthentications => maps to the :auth_methods option
+    # * ProxyCommand => maps to the :proxy option
+    # * ProxyJump => maps to the :proxy option
+    # * PubKeyAuthentication => maps to the :auth_methods option
+    # * RekeyLimit => :rekey_limit
+    # * User => :user
+    # * UserKnownHostsFile => :user_known_hosts_file
+    # * NumberOfPasswordPrompts => :number_of_password_prompts
+    # * FingerprintHash => :fingerprint_hash
+    #
+    # Note that you will never need to use this class directly--you can control
+    # whether the OpenSSH configuration files are read by passing the :config
+    # option to Net::SSH.start. (They are, by default.)
+    class Config
+      class << self
+        @@default_files = %w[~/.ssh/config /etc/ssh_config /etc/ssh/ssh_config]
+        # The following defaults follow the openssh client ssh_config defaults.
+        # http://lwn.net/Articles/544640/
+        # "hostbased" is off and "none" is not supported but we allow it since
+        # it's used by some clients to query the server for allowed auth methods
+        @@default_auth_methods = %w[none publickey password keyboard-interactive]
+
+        # Returns an array of locations of OpenSSH configuration files
+        # to parse by default.
+        def default_files
+          @@default_files.clone
+        end
+
+        def default_auth_methods
+          @@default_auth_methods.clone
+        end
+
+        # Loads the configuration data for the given +host+ from all of the
+        # given +files+ (defaulting to the list of files returned by
+        # #default_files), translates the resulting hash into the options
+        # recognized by Net::SSH, and returns them.
+        def for(host, files=expandable_default_files)
+          translate(files.inject({}) { |settings, file|
+            load(file, host, settings)
+          })
+        end
+
+        # Load the OpenSSH configuration settings in the given +file+ for the
+        # given +host+. If +settings+ is given, the options are merged into
+        # that hash, with existing values taking precedence over newly parsed
+        # ones. Returns a hash containing the OpenSSH options. (See
+        # #translate for how to convert the OpenSSH options into Net::SSH
+        # options.)
+        def load(path, host, settings={}, base_dir = nil)
+          file = File.expand_path(path)
+          base_dir ||= File.dirname(file)
+          return settings unless File.readable?(file)
+
+          globals = {}
+          block_matched = false
+          block_seen = false
+          IO.foreach(file) do |line|
+            next if line =~ /^\s*(?:#.*)?$/
+
+            if line =~ /^\s*(\S+)\s*=(.*)$/
+              key, value = $1, $2
+            else
+              key, value = line.strip.split(/\s+/, 2)
+            end
+
+            # silently ignore malformed entries
+            next if value.nil?
+
+            key.downcase!
+            value = unquote(value)
+
+            value = case value.strip
+                    when /^\d+$/ then value.to_i
+                    when /^no$/i then false
+                    when /^yes$/i then true
+                    else value
+                    end
+
+            if key == 'host'
+              # Support "Host host1 host2 hostN".
+              # See http://github.com/net-ssh/net-ssh/issues#issue/6
+              negative_hosts, positive_hosts = value.to_s.split(/\s+/).partition { |h| h.start_with?('!') }
+
+              # Check for negative patterns first. If the host matches, that overrules any other positive match.
+              # The host substring code is used to strip out the starting "!" so the regexp will be correct.
+              negative_matched = negative_hosts.any? { |h| host =~ pattern2regex(h[1..-1]) }
+
+              if negative_matched
+                block_matched = false
+              else
+                block_matched = positive_hosts.any? { |h| host =~ pattern2regex(h) }
+              end
+
+              block_seen = true
+              settings[key] = host
+            elsif key == 'match'
+              block_matched = eval_match_conditions(value, host, settings)
+              block_seen = true
+            elsif !block_seen
+              case key
+              when 'identityfile'
+                (globals[key] ||= []) << value
+              when 'include'
+                included_file_paths(base_dir, value).each do |file_path|
+                  globals = load(file_path, host, globals, base_dir)
+                end
+              else
+                globals[key] = value unless settings.key?(key)
+              end
+            elsif block_matched
+              case key
+              when 'identityfile'
+                (settings[key] ||= []) << value
+              when 'include'
+                included_file_paths(base_dir, value).each do |file_path|
+                  settings = load(file_path, host, settings, base_dir)
+                end
+              else
+                settings[key] = value unless settings.key?(key)
+              end
+            end
+          end
+
+          globals.merge(settings) do |key, oldval, newval|
+            case key
+            when 'identityfile'
+              oldval + newval
+            else
+              newval
+            end
+          end
+        end
+
+        # Given a hash of OpenSSH configuration options, converts them into
+        # a hash of Net::SSH options. Unrecognized options are ignored. The
+        # +settings+ hash must have Strings for keys, all downcased, and
+        # the returned hash will have Symbols for keys.
+        def translate(settings)
+          auth_methods = default_auth_methods.clone
+          (auth_methods << 'challenge-response').uniq!
+          ret = settings.each_with_object({ auth_methods: auth_methods }) do |(key, value), hash|
+            translate_config_key(hash, key.to_sym, value, settings)
+          end
+          merge_challenge_response_with_keyboard_interactive(ret)
+        end
+
+        # Filters default_files down to the files that are expandable.
+        def expandable_default_files
+          default_files.keep_if do |path|
+            begin
+              File.expand_path(path)
+              true
+            rescue ArgumentError
+              false
+            end
+          end
+        end
+
+        private
+
+        def translate_config_key(hash, key, value, settings)
+          rename = {
+            bindaddress: :bind_address,
+            compression: :compression,
+            compressionlevel: :compression_level,
+            connecttimeout: :timeout,
+            forwardagent: :forward_agent,
+            identitiesonly: :keys_only,
+            identityagent: :identity_agent,
+            globalknownhostsfile: :global_known_hosts_file,
+            hostkeyalias: :host_key_alias,
+            identityfile: :keys,
+            fingerprinthash: :fingerprint_hash,
+            port: :port,
+            user: :user,
+            userknownhostsfile: :user_known_hosts_file
+          }
+          case key
+          when :ciphers
+            hash[:encryption] = value.split(/,/)
+          when :hostbasedauthentication
+            if value
+              (hash[:auth_methods] << "hostbased").uniq!
+            else
+              hash[:auth_methods].delete("hostbased")
+            end
+          when :hostkeyalgorithms
+            hash[:host_key] = value.split(/,/)
+          when :hostname
+            hash[:host_name] = value.gsub(/%h/, settings['host'])
+          when :macs
+            hash[:hmac] = value.split(/,/)
+          when :serveralivecountmax
+            hash[:keepalive_maxcount] = value.to_i if value
+          when :serveraliveinterval
+            if value && value.to_i > 0
+              hash[:keepalive] = true
+              hash[:keepalive_interval] = value.to_i
+            else
+              hash[:keepalive] = false
+            end
+          when :passwordauthentication
+            if value
+              (hash[:auth_methods] << 'password').uniq!
+            else
+              hash[:auth_methods].delete('password')
+            end
+          when :challengeresponseauthentication
+            if value
+              (hash[:auth_methods] << 'challenge-response').uniq!
+            else
+              hash[:auth_methods].delete('challenge-response')
+            end
+          when :kbdinteractiveauthentication
+            if value
+              (hash[:auth_methods] << 'keyboard-interactive').uniq!
+            else
+              hash[:auth_methods].delete('keyboard-interactive')
+            end
+          when :preferredauthentications
+            hash[:auth_methods] = value.split(/,/) # TODO we should place to preferred_auth_methods rather than auth_methods
+          when :proxycommand
+            if value and value !~ /^none$/
+              require 'net/ssh/proxy/command'
+              hash[:proxy] = Net::SSH::Proxy::Command.new(value)
+            end
+          when :proxyjump
+            if value
+              require 'net/ssh/proxy/jump'
+              hash[:proxy] = Net::SSH::Proxy::Jump.new(value)
+            end
+          when :pubkeyauthentication
+            if value
+              (hash[:auth_methods] << 'publickey').uniq!
+            else
+              hash[:auth_methods].delete('publickey')
+            end
+          when :rekeylimit
+            hash[:rekey_limit] = interpret_size(value)
+          when :sendenv
+            multi_send_env = value.to_s.split(/\s+/)
+            hash[:send_env] = multi_send_env.map { |e| Regexp.new pattern2regex(e).source, false }
+          when :numberofpasswordprompts
+            hash[:number_of_password_prompts] = value.to_i
+          when *rename.keys
+            hash[rename[key]] = value
+          end
+        end
+
+        # Converts an ssh_config pattern into a regex for matching against
+        # host names.
+        def pattern2regex(pattern)
+          tail = pattern
+          prefix = ""
+          while !tail.empty? do
+            head,sep,tail = tail.partition(/[\*\?]/)
+            prefix = prefix + Regexp.quote(head)
+            case sep
+            when '*'
+              prefix += '.*'
+            when '?'
+              prefix += '.'
+            when ''
+            else
+              fail "Unpexpcted sep:#{sep}"
+            end
+          end
+          Regexp.new("^" + prefix + "$", true)
+        end
+
+        # Converts the given size into an integer number of bytes.
+        def interpret_size(size)
+          case size
+          when /k$/i then size.to_i * 1024
+          when /m$/i then size.to_i * 1024 * 1024
+          when /g$/i then size.to_i * 1024 * 1024 * 1024
+          else size.to_i
+          end
+        end
+
+        def merge_challenge_response_with_keyboard_interactive(hash)
+          if hash[:auth_methods].include?('challenge-response')
+            hash[:auth_methods].delete('challenge-response')
+            (hash[:auth_methods] << 'keyboard-interactive').uniq!
+          end
+          hash
+        end
+
+        def included_file_paths(base_dir, config_paths)
+          tokenize_config_value(config_paths).flat_map do |path|
+            Dir.glob(File.expand_path(path, base_dir)).select { |f| File.file?(f) }
+          end
+        end
+
+        # Tokenize string into tokens.
+        # A token is a word or a quoted sequence of words, separated by whitespaces.
+        def tokenize_config_value(str)
+          str.scan(/([^"\s]+)?(?:"([^"]+)")?\s*/).map(&:join)
+        end
+
+        def eval_match_conditions(condition, host, settings)
+          # Not using `\s` for whitespace matching as canonical
+          # ssh_config parser implementation (OpenSSH) has specific character set.
+          # Ref: https://github.com/openssh/openssh-portable/blob/2581333d564d8697837729b3d07d45738eaf5a54/misc.c#L237-L239
+          conditions = condition.split(/[ \t\r\n]+|(?<!=)=(?!=)/).reject(&:empty?)
+          return true if conditions == ["all"]
+
+          conditions = conditions.each_slice(2)
+          condition_matches = []
+          conditions.each do |(kind,exprs)|
+            exprs = unquote(exprs)
+
+            case kind.downcase
+            when "all"
+              raise "all cannot be mixed with other conditions"
+            when "host"
+              if exprs.start_with?('!')
+                negated = true
+                exprs = exprs[1..-1]
+              else
+                negated = false
+              end
+              condition_met = false
+              exprs.split(",").each do |expr|
+                condition_met = condition_met || host =~ pattern2regex(expr)
+              end
+              condition_matches << (true && negated ^ condition_met)
+              # else
+              # warn "net-ssh: Unsupported expr in Match block: #{kind}"
+            end
+          end
+
+          !condition_matches.empty? && condition_matches.all?
+        end
+
+        def unquote(string)
+          string =~ /^"(.*)"$/ ? Regexp.last_match(1) : string
+        end
+      end
+    end
+
+  end
+end