vagrant-unbundled 2.2.2.0 → 2.2.3.0

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.4/lib/concurrent/agent.rb

@@ -0,0 +1,587 @@
+require 'concurrent/configuration'
+require 'concurrent/atomic/atomic_reference'
+require 'concurrent/atomic/thread_local_var'
+require 'concurrent/collection/copy_on_write_observer_set'
+require 'concurrent/concern/observable'
+require 'concurrent/synchronization'
+
+module Concurrent
+
+  # `Agent` is inspired by Clojure's [agent](http://clojure.org/agents)
+  # function. An agent is a shared, mutable variable providing independent,
+  # uncoordinated, *asynchronous* change of individual values. Best used when
+  # the value will undergo frequent, complex updates. Suitable when the result
+  # of an update does not need to be known immediately. `Agent` is (mostly)
+  # functionally equivalent to Clojure's agent, except where the runtime
+  # prevents parity.
+  #
+  # Agents are reactive, not autonomous - there is no imperative message loop
+  # and no blocking receive. The state of an Agent should be itself immutable
+  # and the `#value` of an Agent is always immediately available for reading by
+  # any thread without any messages, i.e. observation does not require
+  # cooperation or coordination.
+  #
+  # Agent action dispatches are made using the various `#send` methods. These
+  # methods always return immediately. At some point later, in another thread,
+  # the following will happen:
+  #
+  # 1. The given `action` will be applied to the state of the Agent and the
+  #    `args`, if any were supplied.
+  # 2. The return value of `action` will be passed to the validator lambda,
+  #    if one has been set on the Agent.
+  # 3. If the validator succeeds or if no validator was given, the return value
+  #    of the given `action` will become the new `#value` of the Agent. See
+  #    `#initialize` for details.
+  # 4. If any observers were added to the Agent, they will be notified. See
+  #    `#add_observer` for details.
+  # 5. If during the `action` execution any other dispatches are made (directly
+  #    or indirectly), they will be held until after the `#value` of the Agent
+  #    has been changed.
+  #
+  # If any exceptions are thrown by an action function, no nested dispatches
+  # will occur, and the exception will be cached in the Agent itself. When an
+  # Agent has errors cached, any subsequent interactions will immediately throw
+  # an exception, until the agent's errors are cleared. Agent errors can be
+  # examined with `#error` and the agent restarted with `#restart`.
+  #
+  # The actions of all Agents get interleaved amongst threads in a thread pool.
+  # At any point in time, at most one action for each Agent is being executed.
+  # Actions dispatched to an agent from another single agent or thread will
+  # occur in the order they were sent, potentially interleaved with actions
+  # dispatched to the same agent from other sources. The `#send` method should
+  # be used for actions that are CPU limited, while the `#send_off` method is
+  # appropriate for actions that may block on IO.
+  #
+  # Unlike in Clojure, `Agent` cannot participate in `Concurrent::TVar` transactions.
+  #
+  # ## Example
+  #
+  # ```
+  # def next_fibonacci(set = nil)
+  #   return [0, 1] if set.nil?
+  #   set + [set[-2..-1].reduce{|sum,x| sum + x }]
+  # end
+  #
+  # # create an agent with an initial value
+  # agent = Concurrent::Agent.new(next_fibonacci)
+  #
+  # # send a few update requests
+  # 5.times do
+  #   agent.send{|set| next_fibonacci(set) }
+  # end
+  #
+  # # wait for them to complete
+  # agent.await
+  #
+  # # get the current value
+  # agent.value #=> [0, 1, 1, 2, 3, 5, 8]
+  # ```
+  #
+  # ## Observation
+  #
+  # Agents support observers through the {Concurrent::Observable} mixin module.
+  # Notification of observers occurs every time an action dispatch returns and
+  # the new value is successfully validated. Observation will *not* occur if the
+  # action raises an exception, if validation fails, or when a {#restart} occurs.
+  #
+  # When notified the observer will receive three arguments: `time`, `old_value`,
+  # and `new_value`. The `time` argument is the time at which the value change
+  # occurred. The `old_value` is the value of the Agent when the action began
+  # processing. The `new_value` is the value to which the Agent was set when the
+  # action completed. Note that `old_value` and `new_value` may be the same.
+  # This is not an error. It simply means that the action returned the same
+  # value.
+  #
+  # ## Nested Actions
+  #
+  # It is possible for an Agent action to post further actions back to itself.
+  # The nested actions will be enqueued normally then processed *after* the
+  # outer action completes, in the order they were sent, possibly interleaved
+  # with action dispatches from other threads. Nested actions never deadlock
+  # with one another and a failure in a nested action will never affect the
+  # outer action.
+  #
+  # Nested actions can be called using the Agent reference from the enclosing
+  # scope or by passing the reference in as a "send" argument. Nested actions
+  # cannot be post using `self` from within the action block/proc/lambda; `self`
+  # in this context will not reference the Agent. The preferred method for
+  # dispatching nested actions is to pass the Agent as an argument. This allows
+  # Ruby to more effectively manage the closing scope.
+  #
+  # Prefer this:
+  #
+  # ```
+  # agent = Concurrent::Agent.new(0)
+  # agent.send(agent) do |value, this|
+  #   this.send {|v| v + 42 }
+  #   3.14
+  # end
+  # agent.value #=> 45.14
+  # ```
+  #
+  # Over this:
+  #
+  # ```
+  # agent = Concurrent::Agent.new(0)
+  # agent.send do |value|
+  #   agent.send {|v| v + 42 }
+  #   3.14
+  # end
+  # ```
+  #
+  # @!macro agent_await_warning
+  #
+  #   **NOTE** Never, *under any circumstances*, call any of the "await" methods
+  #   ({#await}, {#await_for}, {#await_for!}, and {#wait}) from within an action
+  #   block/proc/lambda. The call will block the Agent and will always fail.
+  #   Calling either {#await} or {#wait} (with a timeout of `nil`) will
+  #   hopelessly deadlock the Agent with no possibility of recovery.
+  #
+  # @!macro thread_safe_variable_comparison
+  #
+  # @see http://clojure.org/Agents Clojure Agents
+  # @see http://clojure.org/state Values and Change - Clojure's approach to Identity and State
+  class Agent < Synchronization::LockableObject
+    include Concern::Observable
+
+    ERROR_MODES = [:continue, :fail].freeze
+    private_constant :ERROR_MODES
+
+    AWAIT_FLAG = ::Object.new
+    private_constant :AWAIT_FLAG
+
+    AWAIT_ACTION = ->(value, latch) { latch.count_down; AWAIT_FLAG }
+    private_constant :AWAIT_ACTION
+
+    DEFAULT_ERROR_HANDLER = ->(agent, error) { nil }
+    private_constant :DEFAULT_ERROR_HANDLER
+
+    DEFAULT_VALIDATOR = ->(value) { true }
+    private_constant :DEFAULT_VALIDATOR
+
+    Job = Struct.new(:action, :args, :executor, :caller)
+    private_constant :Job
+
+    # Raised during action processing or any other time in an Agent's lifecycle.
+    class Error < StandardError
+      def initialize(message = nil)
+        message ||= 'agent must be restarted before jobs can post'
+        super(message)
+      end
+    end
+
+    # Raised when a new value obtained during action processing or at `#restart`
+    # fails validation.
+    class ValidationError < Error
+      def initialize(message = nil)
+        message ||= 'invalid value'
+        super(message)
+      end
+    end
+
+    # The error mode this Agent is operating in. See {#initialize} for details.
+    attr_reader :error_mode
+
+    # Create a new `Agent` with the given initial value and options.
+    #
+    # The `:validator` option must be `nil` or a side-effect free proc/lambda
+    # which takes one argument. On any intended value change the validator, if
+    # provided, will be called. If the new value is invalid the validator should
+    # return `false` or raise an error.
+    #
+    # The `:error_handler` option must be `nil` or a proc/lambda which takes two
+    # arguments. When an action raises an error or validation fails, either by
+    # returning false or raising an error, the error handler will be called. The
+    # arguments to the error handler will be a reference to the agent itself and
+    # the error object which was raised.
+    #
+    # The `:error_mode` may be either `:continue` (the default if an error
+    # handler is given) or `:fail` (the default if error handler nil or not
+    # given).
+    #
+    # If an action being run by the agent throws an error or doesn't pass
+    # validation the error handler, if present, will be called. After the
+    # handler executes if the error mode is `:continue` the Agent will continue
+    # as if neither the action that caused the error nor the error itself ever
+    # happened.
+    #
+    # If the mode is `:fail` the Agent will become {#failed?} and will stop
+    # accepting new action dispatches. Any previously queued actions will be
+    # held until {#restart} is called. The {#value} method will still work,
+    # returning the value of the Agent before the error.
+    #
+    # @param [Object] initial the initial value
+    # @param [Hash] opts the configuration options
+    #
+    # @option opts [Symbol] :error_mode either `:continue` or `:fail`
+    # @option opts [nil, Proc] :error_handler the (optional) error handler
+    # @option opts [nil, Proc] :validator the (optional) validation procedure
+    def initialize(initial, opts = {})
+      super()
+      synchronize { ns_initialize(initial, opts) }
+    end
+
+    # The current value (state) of the Agent, irrespective of any pending or
+    # in-progress actions. The value is always available and is non-blocking.
+    #
+    # @return [Object] the current value
+    def value
+      @current.value # TODO (pitr 12-Sep-2015): broken unsafe read?
+    end
+
+    alias_method :deref, :value
+
+    # When {#failed?} and {#error_mode} is `:fail`, returns the error object
+    # which caused the failure, else `nil`. When {#error_mode} is `:continue`
+    # will *always* return `nil`.
+    #
+    # @return [nil, Error] the error which caused the failure when {#failed?}
+    def error
+      @error.value
+    end
+
+    alias_method :reason, :error
+
+    # @!macro agent_send
+    #
+    #   Dispatches an action to the Agent and returns immediately. Subsequently,
+    #   in a thread from a thread pool, the {#value} will be set to the return
+    #   value of the action. Action dispatches are only allowed when the Agent
+    #   is not {#failed?}.
+    #
+    #   The action must be a block/proc/lambda which takes 1 or more arguments.
+    #   The first argument is the current {#value} of the Agent. Any arguments
+    #   passed to the send method via the `args` parameter will be passed to the
+    #   action as the remaining arguments. The action must return the new value
+    #   of the Agent.
+    #
+    #   * {#send} and {#send!} should be used for actions that are CPU limited
+    #   * {#send_off}, {#send_off!}, and {#<<} are appropriate for actions that
+    #     may block on IO
+    #   * {#send_via} and {#send_via!} are used when a specific executor is to
+    #     be used for the action
+    #
+    #   @param [Array<Object>] args zero or more arguments to be passed to
+    #     the action
+    #   @param [Proc] action the action dispatch to be enqueued
+    #
+    #   @yield [agent, value, *args] process the old value and return the new
+    #   @yieldparam [Object] value the current {#value} of the Agent
+    #   @yieldparam [Array<Object>] args zero or more arguments to pass to the
+    #     action
+    #   @yieldreturn [Object] the new value of the Agent
+    #
+    # @!macro send_return
+    #   @return [Boolean] true if the action is successfully enqueued, false if
+    #     the Agent is {#failed?}
+    def send(*args, &action)
+      enqueue_action_job(action, args, Concurrent.global_fast_executor)
+    end
+
+    # @!macro agent_send
+    #
+    # @!macro send_bang_return_and_raise
+    #   @return [Boolean] true if the action is successfully enqueued
+    #   @raise [Concurrent::Agent::Error] if the Agent is {#failed?}
+    def send!(*args, &action)
+      raise Error.new unless send(*args, &action)
+      true
+    end
+
+    # @!macro agent_send
+    # @!macro send_return
+    def send_off(*args, &action)
+      enqueue_action_job(action, args, Concurrent.global_io_executor)
+    end
+
+    alias_method :post, :send_off
+
+    # @!macro agent_send
+    # @!macro send_bang_return_and_raise
+    def send_off!(*args, &action)
+      raise Error.new unless send_off(*args, &action)
+      true
+    end
+
+    # @!macro agent_send
+    # @!macro send_return
+    # @param [Concurrent::ExecutorService] executor the executor on which the
+    #   action is to be dispatched
+    def send_via(executor, *args, &action)
+      enqueue_action_job(action, args, executor)
+    end
+
+    # @!macro agent_send
+    # @!macro send_bang_return_and_raise
+    # @param [Concurrent::ExecutorService] executor the executor on which the
+    #   action is to be dispatched
+    def send_via!(executor, *args, &action)
+      raise Error.new unless send_via(executor, *args, &action)
+      true
+    end
+
+    # Dispatches an action to the Agent and returns immediately. Subsequently,
+    # in a thread from a thread pool, the {#value} will be set to the return
+    # value of the action. Appropriate for actions that may block on IO.
+    #
+    # @param [Proc] action the action dispatch to be enqueued
+    # @return [Concurrent::Agent] self
+    # @see #send_off
+    def <<(action)
+      send_off(&action)
+      self
+    end
+
+    # Blocks the current thread (indefinitely!) until all actions dispatched
+    # thus far, from this thread or nested by the Agent, have occurred. Will
+    # block when {#failed?}. Will never return if a failed Agent is {#restart}
+    # with `:clear_actions` true.
+    #
+    # Returns a reference to `self` to support method chaining:
+    #
+    # ```
+    # current_value = agent.await.value
+    # ```
+    #
+    # @return [Boolean] self
+    #
+    # @!macro agent_await_warning
+    def await
+      wait(nil)
+      self
+    end
+
+    # Blocks the current thread until all actions dispatched thus far, from this
+    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
+    # has elapsed.
+    #
+    # @param [Float] timeout the maximum number of seconds to wait
+    # @return [Boolean] true if all actions complete before timeout else false
+    #
+    # @!macro agent_await_warning
+    def await_for(timeout)
+      wait(timeout.to_f)
+    end
+
+    # Blocks the current thread until all actions dispatched thus far, from this
+    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
+    # has elapsed.
+    #
+    # @param [Float] timeout the maximum number of seconds to wait
+    # @return [Boolean] true if all actions complete before timeout
+    #
+    # @raise [Concurrent::TimeoutError] when timout is reached
+    #
+    # @!macro agent_await_warning
+    def await_for!(timeout)
+      raise Concurrent::TimeoutError unless wait(timeout.to_f)
+      true
+    end
+
+    # Blocks the current thread until all actions dispatched thus far, from this
+    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
+    # has elapsed. Will block indefinitely when timeout is nil or not given.
+    #
+    # Provided mainly for consistency with other classes in this library. Prefer
+    # the various `await` methods instead.
+    #
+    # @param [Float] timeout the maximum number of seconds to wait
+    # @return [Boolean] true if all actions complete before timeout else false
+    #
+    # @!macro agent_await_warning
+    def wait(timeout = nil)
+      latch = Concurrent::CountDownLatch.new(1)
+      enqueue_await_job(latch)
+      latch.wait(timeout)
+    end
+
+    # Is the Agent in a failed state?
+    #
+    # @see #restart
+    def failed?
+      !@error.value.nil?
+    end
+
+    alias_method :stopped?, :failed?
+
+    # When an Agent is {#failed?}, changes the Agent {#value} to `new_value`
+    # then un-fails the Agent so that action dispatches are allowed again. If
+    # the `:clear_actions` option is give and true, any actions queued on the
+    # Agent that were being held while it was failed will be discarded,
+    # otherwise those held actions will proceed. The `new_value` must pass the
+    # validator if any, or `restart` will raise an exception and the Agent will
+    # remain failed with its old {#value} and {#error}. Observers, if any, will
+    # not be notified of the new state.
+    #
+    # @param [Object] new_value the new value for the Agent once restarted
+    # @param [Hash] opts the configuration options
+    # @option opts [Symbol] :clear_actions true if all enqueued but unprocessed
+    #   actions should be discarded on restart, else false (default: false)
+    # @return [Boolean] true
+    #
+    # @raise [Concurrent:AgentError] when not failed
+    def restart(new_value, opts = {})
+      clear_actions = opts.fetch(:clear_actions, false)
+      synchronize do
+        raise Error.new('agent is not failed') unless failed?
+        raise ValidationError unless ns_validate(new_value)
+        @current.value = new_value
+        @error.value   = nil
+        @queue.clear if clear_actions
+        ns_post_next_job unless @queue.empty?
+      end
+      true
+    end
+
+    class << self
+
+      # Blocks the current thread (indefinitely!) until all actions dispatched
+      # thus far to all the given Agents, from this thread or nested by the
+      # given Agents, have occurred. Will block when any of the agents are
+      # failed. Will never return if a failed Agent is restart with
+      # `:clear_actions` true.
+      #
+      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
+      # @return [Boolean] true
+      #
+      # @!macro agent_await_warning
+      def await(*agents)
+        agents.each { |agent| agent.await }
+        true
+      end
+
+      # Blocks the current thread until all actions dispatched thus far to all
+      # the given Agents, from this thread or nested by the given Agents, have
+      # occurred, or the timeout (in seconds) has elapsed.
+      #
+      # @param [Float] timeout the maximum number of seconds to wait
+      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
+      # @return [Boolean] true if all actions complete before timeout else false
+      #
+      # @!macro agent_await_warning
+      def await_for(timeout, *agents)
+        end_at = Concurrent.monotonic_time + timeout.to_f
+        ok     = agents.length.times do |i|
+          break false if (delay = end_at - Concurrent.monotonic_time) < 0
+          break false unless agents[i].await_for(delay)
+        end
+        !!ok
+      end
+
+      # Blocks the current thread until all actions dispatched thus far to all
+      # the given Agents, from this thread or nested by the given Agents, have
+      # occurred, or the timeout (in seconds) has elapsed.
+      #
+      # @param [Float] timeout the maximum number of seconds to wait
+      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
+      # @return [Boolean] true if all actions complete before timeout
+      #
+      # @raise [Concurrent::TimeoutError] when timout is reached
+      # @!macro agent_await_warning
+      def await_for!(timeout, *agents)
+        raise Concurrent::TimeoutError unless await_for(timeout, *agents)
+        true
+      end
+    end
+
+    private
+
+    def ns_initialize(initial, opts)
+      @error_mode    = opts[:error_mode]
+      @error_handler = opts[:error_handler]
+
+      if @error_mode && !ERROR_MODES.include?(@error_mode)
+        raise ArgumentError.new('unrecognized error mode')
+      elsif @error_mode.nil?
+        @error_mode = @error_handler ? :continue : :fail
+      end
+
+      @error_handler ||= DEFAULT_ERROR_HANDLER
+      @validator     = opts.fetch(:validator, DEFAULT_VALIDATOR)
+      @current       = Concurrent::AtomicReference.new(initial)
+      @error         = Concurrent::AtomicReference.new(nil)
+      @caller        = Concurrent::ThreadLocalVar.new(nil)
+      @queue         = []
+
+      self.observers = Collection::CopyOnNotifyObserverSet.new
+    end
+
+    def enqueue_action_job(action, args, executor)
+      raise ArgumentError.new('no action given') unless action
+      job = Job.new(action, args, executor, @caller.value || Thread.current.object_id)
+      synchronize { ns_enqueue_job(job) }
+    end
+
+    def enqueue_await_job(latch)
+      synchronize do
+        if (index = ns_find_last_job_for_thread)
+          job = Job.new(AWAIT_ACTION, [latch], Concurrent.global_immediate_executor,
+                        Thread.current.object_id)
+          ns_enqueue_job(job, index+1)
+        else
+          latch.count_down
+          true
+        end
+      end
+    end
+
+    def ns_enqueue_job(job, index = nil)
+      # a non-nil index means this is an await job
+      return false if index.nil? && failed?
+      index ||= @queue.length
+      @queue.insert(index, job)
+      # if this is the only job, post to executor
+      ns_post_next_job if @queue.length == 1
+      true
+    end
+
+    def ns_post_next_job
+      @queue.first.executor.post { execute_next_job }
+    end
+
+    def execute_next_job
+      job       = synchronize { @queue.first }
+      old_value = @current.value
+
+      @caller.value = job.caller # for nested actions
+      new_value     = job.action.call(old_value, *job.args)
+      @caller.value = nil
+
+      return if new_value == AWAIT_FLAG
+
+      if ns_validate(new_value)
+        @current.value = new_value
+        observers.notify_observers(Time.now, old_value, new_value)
+      else
+        handle_error(ValidationError.new)
+      end
+    rescue => error
+      handle_error(error)
+    ensure
+      synchronize do
+        @queue.shift
+        unless failed? || @queue.empty?
+          ns_post_next_job
+        end
+      end
+    end
+
+    def ns_validate(value)
+      @validator.call(value)
+    rescue
+      false
+    end
+
+    def handle_error(error)
+      # stop new jobs from posting
+      @error.value = error if @error_mode == :fail
+      @error_handler.call(self, error)
+    rescue
+      # do nothing
+    end
+
+    def ns_find_last_job_for_thread
+      @queue.rindex { |job| job.caller == Thread.current.object_id }
+    end
+  end
+end

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.4/lib/concurrent/array.rb

@@ -0,0 +1,66 @@
+require 'concurrent/utility/engine'
+require 'concurrent/thread_safe/util'
+
+module Concurrent
+
+  # @!macro concurrent_array
+  #
+  #   A thread-safe subclass of Array. This version locks against the object
+  #   itself for every method call, ensuring only one thread can be reading
+  #   or writing at a time. This includes iteration methods like `#each`.
+  #
+  #   @note `a += b` is **not** a **thread-safe** operation on
+  #   `Concurrent::Array`. It reads array `a`, then it creates new `Concurrent::Array`
+  #   which is concatenation of `a` and `b`, then it writes the concatenation to `a`.
+  #   The read and write are independent operations they do not form a single atomic
+  #   operation therefore when two `+=` operations are executed concurrently updates
+  #   may be lost. Use `#concat` instead.
+  #
+  #   @see http://ruby-doc.org/core-2.2.0/Array.html Ruby standard library `Array`
+
+  # @!macro internal_implementation_note
+  ArrayImplementation = case
+                        when Concurrent.on_cruby?
+                          # Because MRI never runs code in parallel, the existing
+                          # non-thread-safe structures should usually work fine.
+                          ::Array
+
+                        when Concurrent.on_jruby?
+                          require 'jruby/synchronized'
+
+                          class JRubyArray < ::Array
+                            include JRuby::Synchronized
+                          end
+                          JRubyArray
+
+                        when Concurrent.on_rbx?
+                          require 'monitor'
+                          require 'concurrent/thread_safe/util/data_structures'
+
+                          class RbxArray < ::Array
+                          end
+
+                          ThreadSafe::Util.make_synchronized_on_rbx RbxArray
+                          RbxArray
+
+                        when Concurrent.on_truffleruby?
+                          require 'concurrent/thread_safe/util/data_structures'
+
+                          class TruffleRubyArray < ::Array
+                          end
+
+                          ThreadSafe::Util.make_synchronized_on_truffleruby TruffleRubyArray
+                          TruffleRubyArray
+
+                        else
+                          warn 'Possibly unsupported Ruby implementation'
+                          ::Array
+                        end
+  private_constant :ArrayImplementation
+
+  # @!macro concurrent_array
+  class Array < ArrayImplementation
+  end
+
+end
+