vagrant-openstack 0.0.4

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/recipes/mod_xsendfile.rb

@@ -0,0 +1,38 @@
+#
+# Cookbook Name:: apache2
+# Recipe:: mod_xsendfile
+#
+# Copyright 2011, CustomInk, LLC.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+case node['platform_family']
+when "debian"
+
+  package "libapache2-mod-xsendfile"
+
+when "rhel", "fedora"
+
+  package "mod_xsendfile" do
+    notifies :run, "execute[generate-module-list]", :immediately
+  end
+
+end
+
+file "#{node['apache']['dir']}/conf.d/xsendfile.conf" do
+  action :delete
+  backup false
+end
+
+apache_module "xsendfile"

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/a2dismod.erb

@@ -0,0 +1,22 @@
+#!/bin/sh -e
+
+SYSCONFDIR='<%= node['apache']['dir'] %>'
+
+if [ -z $1 ]; then
+        echo "Which module would you like to disable?"
+        echo -n "Your choices are: "
+        ls $SYSCONFDIR/mods-enabled/*.load | \
+        sed -e "s,$SYSCONFDIR/mods-enabled/,,g" | sed -e 's/\.load$//g;' | xargs echo
+        echo -n "Module name? "
+        read MODNAME
+else
+        MODNAME=$1
+fi
+
+if ! [ -e $SYSCONFDIR/mods-enabled/$MODNAME.load ]; then
+        echo "This module is already disabled, or does not exist!"
+        exit 1
+fi
+
+rm -f $SYSCONFDIR/mods-enabled/$MODNAME.*
+echo "Module $MODNAME disabled; reload apache to fully disable."

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/a2dissite.erb

@@ -0,0 +1,29 @@
+#!/bin/sh -e
+
+SYSCONFDIR='<%= node['apache']['dir'] %>'
+
+if [ -z $1 ]; then
+        echo "Which site would you like to disable?"
+        echo -n "Your choices are: "
+        ls $SYSCONFDIR/sites-enabled/* | \
+        sed -e "s,$SYSCONFDIR/sites-enabled/,,g" | xargs echo
+        echo -n "Site name? "
+        read SITENAME
+else
+        SITENAME=$1
+fi
+
+if [ $SITENAME = "default" ]; then
+        PRIORITY="000"
+fi
+
+if ! [ -e $SYSCONFDIR/sites-enabled/$SITENAME -o \
+       -e $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME" ]; then
+        echo "This site is already disabled, or does not exist!"
+        exit 1
+fi
+
+if ! rm $SYSCONFDIR/sites-enabled/$SITENAME 2>/dev/null; then
+        rm -f $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME"
+fi
+echo "Site $SITENAME disabled; reload apache to disable."

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/a2enmod.erb

@@ -0,0 +1,37 @@
+#!/bin/sh -e
+
+SYSCONFDIR='<%= node['apache']['dir'] %>'
+
+if [ -z $1 ]; then
+        echo "Which module would you like to enable?"
+        echo -n "Your choices are: "
+        ls $SYSCONFDIR/mods-available/*.load | \
+        sed -e "s,$SYSCONFDIR/mods-available/,,g" | sed -e 's/\.load$//g;' | xargs echo
+        echo -n "Module name? "
+        read MODNAME
+else
+        MODNAME=$1
+fi
+
+#figure out if we're on a prefork or threaded mpm
+if [ -x /usr/sbin/apache2 ]; then
+        PREFORK=`/usr/sbin/apache2 -l | grep prefork || true`
+fi
+
+if [ -e $SYSCONFDIR/mods-enabled/$MODNAME.load -a -e $SYSCONFDIR/mods-enabled/$MODNAME.conf ]; then
+        echo "This module is already enabled!"
+        exit 0 
+fi
+
+if ! [ -e $SYSCONFDIR/mods-available/$MODNAME.load ]; then
+        echo "This module does not exist!"
+        exit 1
+fi
+
+for i in conf load; do 
+        if [ -e $SYSCONFDIR/mods-available/$MODNAME.$i -a ! -e $SYSCONFDIR/mods-enabled/$MODNAME.$i ]; then
+        ln -sf $SYSCONFDIR/mods-available/$MODNAME.$i $SYSCONFDIR/mods-enabled/$MODNAME.$i;
+        fi
+done
+
+echo "Module $MODNAME installed; reload apache to enable."

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/a2ensite.erb

@@ -0,0 +1,38 @@
+#!/bin/sh -e
+
+SYSCONFDIR='<%= node['apache']['dir'] %>'
+
+if [ -z $1 ]; then
+        echo "Which site would you like to enable?"
+        echo -n "Your choices are: "
+        ls $SYSCONFDIR/sites-available/* | \
+        sed -e "s,$SYSCONFDIR/sites-available/,,g" | xargs echo
+        echo -n "Site name? "
+        read SITENAME
+else
+        SITENAME=$1
+fi
+
+if [ $SITENAME = "default" ]; then
+        PRIORITY="000"
+fi
+
+if [ -e $SYSCONFDIR/sites-enabled/$SITENAME -o \
+     -e $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME" ]; then
+        echo "This site is already enabled!"
+        exit 0
+fi
+
+if ! [ -e $SYSCONFDIR/sites-available/$SITENAME ]; then
+        echo "This site does not exist!"
+        exit 1
+fi
+
+if [ $SITENAME = "default" ]; then
+        ln -sf $SYSCONFDIR/sites-available/$SITENAME \
+               $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME"
+else
+        ln -sf $SYSCONFDIR/sites-available/$SITENAME $SYSCONFDIR/sites-enabled/$SITENAME
+fi
+
+echo "Site $SITENAME installed; reload apache to enable."

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/apache2.conf.erb

@@ -0,0 +1,238 @@
+#
+# Generated by Chef
+#
+# Based on the Ubuntu apache2.conf
+
+ServerRoot "<%= node['apache']['dir'] %>"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+<% if %w{debian}.include?(node['platform_family']) -%>
+LockFile /var/lock/apache2/accept.lock
+<% elsif %w{freebsd}.include?(node['platform_family']) -%>
+LockFile /var/log/accept.lock
+<% else %>
+LockFile logs/accept.lock
+<% end -%>
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile <%= node['apache']['pid_file'] %>
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout <%= node['apache']['timeout'] %>
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive <%= node['apache']['keepalive'] %>
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests <%= node['apache']['keepaliverequests'] %>
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout <%= node['apache']['keepalivetimeout'] %>
+
+##
+## Server-Pool Size Regulation (MPM specific)
+## 
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+    StartServers          <%= node['apache']['prefork']['startservers'] %>
+    MinSpareServers       <%= node['apache']['prefork']['minspareservers'] %>
+    MaxSpareServers       <%= node['apache']['prefork']['maxspareservers'] %>
+    ServerLimit           <%= node['apache']['prefork']['serverlimit'] %>
+    MaxClients            <%= node['apache']['prefork']['maxclients'] %>
+    MaxRequestsPerChild   <%= node['apache']['prefork']['maxrequestsperchild'] %>
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+    StartServers          <%= node['apache']['worker']['startservers'] %>
+    ServerLimit           <%= node['apache']['worker']['serverlimit'] %>
+    MaxClients            <%= node['apache']['worker']['maxclients'] %>
+    MinSpareThreads       <%= node['apache']['worker']['minsparethreads'] %>
+    MaxSpareThreads       <%= node['apache']['worker']['maxsparethreads'] %>
+    ThreadsPerChild       <%= node['apache']['worker']['threadsperchild'] %>
+    MaxRequestsPerChild   <%= node['apache']['worker']['maxrequestsperchild'] %>
+</IfModule>
+
+User <%= node['apache']['user'] %>
+Group <%= node['apache']['group'] %>
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+</Files>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog <%= node['apache']['log_dir'] %>/<%= node['apache']['error_log'] %>
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# COOK-1021: Dummy LoadModule directive to aid module installations
+#LoadModule dummy_module modules/mod_dummy.so
+
+# Include module configuration:
+Include <%= node['apache']['dir'] %>/mods-enabled/*.load
+Include <%= node['apache']['dir'] %>/mods-enabled/*.conf
+
+<% if %w{freebsd}.include?(node['platform_family']) -%>
+<IfDefine NOHTTPACCEPT>
+   AcceptFilter http none
+   AcceptFilter https none
+</IfDefine>
+<% end %>
+
+# Include ports listing
+Include <%= node['apache']['dir'] %>/ports.conf
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+#
+
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# Putting this all together, we can internationalize error responses.
+#
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections.  We use 
+# includes to substitute the appropriate text.
+#
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line:
+#
+#   Alias /error/include/ "/your/include/path/"
+#
+# which allows you to create your own set of files by starting with the
+# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
+# even on a per-VirtualHost basis.  The default include files will display
+# your Apache version number and your ServerAdmin email address regardless
+# of the setting of ServerSignature.
+#
+# The internationalized error documents require mod_alias, mod_include
+# and mod_negotiation.  To activate them, uncomment the following 30 lines.
+
+#    Alias /error/ "/usr/share/apache2/error/"
+#
+#    <Directory "/usr/share/apache2/error">
+#        AllowOverride None
+#        Options IncludesNoExec
+#        AddOutputFilter Includes html
+#        AddHandler type-map var
+#        Order allow,deny
+#        Allow from all
+#        LanguagePriority en cs de es fr it nl sv pt-br ro
+#        ForceLanguagePriority Prefer Fallback
+#    </Directory>
+#
+#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+#    ErrorDocument 410 /error/HTTP_GONE.html.var
+#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
+#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+
+
+# Include generic snippets of statements
+Include <%= node['apache']['dir'] %>/conf.d/
+
+# Include the virtual host configurations:
+Include <%= node['apache']['dir'] %>/sites-enabled/

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/apache2.god.erb

@@ -0,0 +1,19 @@
+God.watch do |w|
+  w.name = "apache2"
+  w.interval = 30.seconds # default
+  w.start = "<%= @params[:start] %>"
+  w.stop = "<%= @params[:stop] %>"
+  w.restart = "<%= @params[:restart] %>"
+  w.start_grace = 10.seconds
+  w.restart_grace = 10.seconds
+  w.pid_file = "/var/run/apache2.pid"
+  w.behavior(:clean_pid_file)
+
+  w.start_if do |start|
+    start.condition(:process_running) do |c|
+        c.interval = 5.seconds
+        c.running = false
+        c.notify = 'admin'
+    end
+  end
+end

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/charset.erb

@@ -0,0 +1,6 @@
+# Read the documentation before enabling AddDefaultCharset.
+# In general, it is only a good idea if you know that all your files
+# have this encoding. It will override any encoding given in the files
+# in meta http-equiv or xml encoding tags.
+
+#AddDefaultCharset UTF-8

data/tmp/librarian/cache/source/chef/site/877777683730772c36b1e6a3fc3aa2c3/apache2/version-uri/a7ab7e6a4c7e38e585540241cf05880e/package/templates/default/default-site.erb

@@ -0,0 +1,57 @@
+<VirtualHost *:80>
+        ServerAdmin <%= node['apache']['contact'] %>
+
+        DocumentRoot /var/www/
+        <Directory />
+                Options FollowSymLinks
+                AllowOverride None
+        </Directory>
+        <Directory /var/www/>
+                Options Indexes FollowSymLinks MultiViews
+                AllowOverride None
+                Order allow,deny
+                allow from all
+                # This directive allows us to have apache2's default start page
+                # in /apache2-default/, but still have / go to the right place
+                #RedirectMatch ^/$ /apache2-default/
+        </Directory>
+
+        ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
+        <Directory "/usr/lib/cgi-bin">
+                AllowOverride None
+                Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
+                Order allow,deny
+                Allow from all
+        </Directory>
+
+        ErrorLog <%= node['apache']['log_dir'] %>/error.log
+
+        # Possible values include: debug, info, notice, warn, error, crit,
+        # alert, emerg.
+        LogLevel warn
+
+        CustomLog <%= node['apache']['log_dir'] %>/access.log combined
+        ServerSignature On
+
+        Alias /doc/ "/usr/share/doc/"
+        <Directory "/usr/share/doc/">
+            Options Indexes MultiViews FollowSymLinks
+            AllowOverride None
+            Order deny,allow
+            Deny from all
+            Allow from 127.0.0.0/255.0.0.0 ::1/128
+        </Directory>
+
+        <% if %w{ rhel fedora }.include?(node['platform_family']) -%>
+        #
+        # This configuration file enables the default "Welcome"
+        # page if there is no default index page present for
+        # the root URL.  To disable the Welcome page, comment
+        # out all the lines below.
+        #
+        <LocationMatch "^/+$">
+            Options -Indexes
+            ErrorDocument 403 /error/noindex.html
+        </LocationMatch>
+        <% end -%>
+</VirtualHost>