vagrant-openstack 0.0.4

data/cookbooks/apache2/templates/default/etc-sysconfig-httpd.erb

@@ -0,0 +1,31 @@
+# This file managed by Chef. Changes will be overwritten.
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model.  A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+# The service must be stopped before changing this variable.
+#
+HTTPD=<%= node['apache']['binary'] %>
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set OPTIONS here.
+#
+#OPTIONS=
+
+#
+# By default, the httpd process is started in the C locale; to
+# change the locale in which the server runs, the HTTPD_LANG
+# variable can be set.
+#
+#HTTPD_LANG=C
+
+#
+# By default, the httpd process will create the file
+# /var/run/httpd/httpd.pid in which it records its process
+# identification number when it starts.  If an alternate location is
+# specified in httpd.conf (via the PidFile directive), the new
+# location needs to be reported in the PIDFILE.
+#
+#PIDFILE=<%= node['apache']['pid_file'] %>

data/cookbooks/apache2/templates/default/mods/README

@@ -0,0 +1,2 @@
+These configs are taken from a Debian apache2.2-common 2.2.11-3 install. They 
+work on CentOS 5.3 with a few conditions using erb. 

data/cookbooks/apache2/templates/default/mods/alias.conf.erb

@@ -0,0 +1,24 @@
+<IfModule alias_module>
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is 
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL.  So "/icons" isn't aliased in this
+# example, only "/icons/".  If the fakename is slash-terminated, then the 
+# realname must also be slash terminated, and if the fakename omits the 
+# trailing slash, the realname must also omit it.
+#
+# We include the /icons/ alias for FancyIndexed directory listings.  If
+# you do not use FancyIndexing, you may comment this out.
+#
+Alias /icons/ "<%= node['apache']['icondir'] %>/"
+
+<Directory "<%= node['apache']['icondir'] %>">
+    Options Indexes MultiViews
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+</IfModule>

data/cookbooks/apache2/templates/default/mods/auth_cas.conf.erb

@@ -0,0 +1 @@
+CASCookiePath <%= node['apache']['cache_dir'] %>/mod_auth_cas/

data/cookbooks/apache2/templates/default/mods/auth_cas.load.erb

@@ -0,0 +1 @@
+LoadModule auth_cas_module <%= node['apache']['libexecdir'] %>/mod_auth_cas.so

data/cookbooks/apache2/templates/default/mods/authopenid.load.erb

@@ -0,0 +1 @@
+LoadModule authopenid_module <%= node['apache']['libexecdir'] %>/mod_auth_openid.so

data/cookbooks/apache2/templates/default/mods/autoindex.conf.erb

@@ -0,0 +1,101 @@
+<IfModule mod_autoindex.c>
+#
+# Directives controlling the display of server-generated directory listings.
+#
+
+#
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+# Remove/replace the "Charset=UTF-8" if you don't use UTF-8 for your filenames.
+#
+IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=* DescriptionWidth=* Charset=UTF-8
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions.  These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip x-bzip2
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+# It's a suffix rule, so simply matching "core" matches "score" as well !
+AddIcon /icons/bomb.gif /core
+AddIcon (SND,/icons/sound2.gif) .ogg
+AddIcon (VID,/icons/movie.gif) .ogm
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# Default icons for OpenDocument format
+AddIcon /icons/odf6odt-20x22.png .odt
+AddIcon /icons/odf6ods-20x22.png .ods
+AddIcon /icons/odf6odp-20x22.png .odp
+AddIcon /icons/odf6odg-20x22.png .odg
+AddIcon /icons/odf6odc-20x22.png .odc
+AddIcon /icons/odf6odf-20x22.png .odf
+AddIcon /icons/odf6odb-20x22.png .odb
+AddIcon /icons/odf6odi-20x22.png .odi
+AddIcon /icons/odf6odm-20x22.png .odm
+
+AddIcon /icons/odf6ott-20x22.png .ott
+AddIcon /icons/odf6ots-20x22.png .ots
+AddIcon /icons/odf6otp-20x22.png .otp
+AddIcon /icons/odf6otg-20x22.png .otg
+AddIcon /icons/odf6otc-20x22.png .otc
+AddIcon /icons/odf6otf-20x22.png .otf
+AddIcon /icons/odf6oti-20x22.png .oti
+AddIcon /icons/odf6oth-20x22.png .oth
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes.  These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes. 
+ReadmeName README.html
+HeaderName HEADER.html
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing.  Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# RCS CVS *,v *,t 
+
+</IfModule>

data/cookbooks/apache2/templates/default/mods/deflate.conf.erb

@@ -0,0 +1,16 @@
+<IfModule mod_deflate.c>
+          AddOutputFilterByType DEFLATE text/html
+          AddOutputFilterByType DEFLATE text/css
+          AddOutputFilterByType DEFLATE text/plain
+          AddOutputFilterByType DEFLATE text/xml
+          AddOutputFilterByType DEFLATE application/xhtml+xml
+          AddOutputFilterByType DEFLATE application/xml
+          AddOutputFilterByType DEFLATE image/svg+xml
+          AddOutputFilterByType DEFLATE application/rss+xml
+          AddOutputFilterByType DEFLATE application/atom_xml
+          AddOutputFilterByType DEFLATE application/javascript
+          AddOutputFilterByType DEFLATE application/x-javascript
+          AddOutputFilterByType DEFLATE application/x-httpd-php
+          AddOutputFilterByType DEFLATE application/x-httpd-fastphp
+          AddOutputFilterByType DEFLATE application/x-httpd-eruby
+</IfModule>

data/cookbooks/apache2/templates/default/mods/dir.conf.erb

@@ -0,0 +1,5 @@
+<IfModule mod_dir.c>
+
+          DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm
+
+</IfModule>

data/cookbooks/apache2/templates/default/mods/fastcgi.conf.erb

@@ -0,0 +1,5 @@
+<IfModule mod_fastcgi.c>
+  AddHandler fastcgi-script .fcgi
+  #FastCgiWrapper /usr/lib/apache2/suexec
+  FastCgiIpcDir /var/lib/apache2/fastcgi
+</IfModule>

data/cookbooks/apache2/templates/default/mods/fcgid.conf.erb

@@ -0,0 +1,10 @@
+<IfModule mod_fcgid.c>
+  AddHandler    fcgid-script .fcgi
+  IPCConnectTimeout 20
+</IfModule>
+
+<% if %w{ rhel fedora }.include?(node['platform_family']) -%>
+# Sane place to put sockets and shared memory file
+SocketPath run/mod_fcgid
+SharememPath run/mod_fcgid/fcgid_shm
+<% end -%>

data/cookbooks/apache2/templates/default/mods/include.conf.erb

@@ -0,0 +1,4 @@
+<IfModule mod_include.c>
+	AddType text/html .shtml
+	AddOutputFilter INCLUDES .shtml
+</IfModule>

data/cookbooks/apache2/templates/default/mods/include.erb

@@ -0,0 +1,4 @@
+<IfModule mod_include.c> 
+	AddType text/html .shtml
+	AddOutputFilter INCLUDES .shtml
+</IfModule>

data/cookbooks/apache2/templates/default/mods/mime.conf.erb

@@ -0,0 +1,198 @@
+<IfModule mod_mime.c>
+
+#
+# TypesConfig points to the file containing the list of mappings from
+# filename extension to MIME-type.
+#
+<% case node['platform_family'] -%>
+<% when "arch" -%>
+TypesConfig <%= node['apache']['dir'] %>/conf/mime.types
+<% when "freebsd" -%>
+TypesConfig <%= node['apache']['dir'] %>/mime.types
+<% else -%>
+TypesConfig /etc/mime.types
+<% end -%>
+
+#
+# AddType allows you to add to or override the MIME configuration
+# file mime.types for specific file types.
+#
+#AddType application/x-gzip .tgz
+#
+# AddEncoding allows you to have certain browsers uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have
+# nothing to do with the FancyIndexing customization directives above.
+#
+#AddEncoding x-compress .Z
+#AddEncoding x-gzip .gz .tgz
+#AddEncoding x-bzip2 .bz2
+#
+# If the AddEncoding directives above are commented-out, then you
+# probably should define those extensions to indicate media types:
+#
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+AddType application/x-bzip2 .bz2
+
+#
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# * It is generally better to not mark a page as
+# * being a certain language than marking it with the wrong
+# * language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+#
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+# See README.Debian for Spanish
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+# See README.Debian for Turkish
+AddLanguage tr .tr
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+#
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See http://www.iana.org/assignments/character-sets for the
+# official list of charset names and their respective RFCs.
+#
+AddCharset us-ascii    .ascii .us-ascii
+AddCharset ISO-8859-1  .iso8859-1  .latin1
+AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
+AddCharset ISO-8859-3  .iso8859-3  .latin3
+AddCharset ISO-8859-4  .iso8859-4  .latin4
+AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
+AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
+AddCharset ISO-8859-7  .iso8859-7  .grk .greek
+AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
+AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
+AddCharset ISO-8859-10  .iso8859-10  .latin6
+AddCharset ISO-8859-13  .iso8859-13
+AddCharset ISO-8859-14  .iso8859-14  .latin8
+AddCharset ISO-8859-15  .iso8859-15  .latin9
+AddCharset ISO-8859-16  .iso8859-16  .latin10
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5        .Big5       .big5 .b5
+AddCharset cn-Big5     .cn-big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251   .win-1251
+AddCharset CP866       .cp866
+AddCharset KOI8      .koi8
+AddCharset KOI8-E      .koi8-e
+AddCharset KOI8-r      .koi8-r .koi8-ru
+AddCharset KOI8-U      .koi8-u
+AddCharset KOI8-ru     .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-7       .utf7
+AddCharset UTF-8       .utf8
+AddCharset UTF-16      .utf16
+AddCharset UTF-16BE    .utf16be
+AddCharset UTF-16LE    .utf16le
+AddCharset UTF-32      .utf32
+AddCharset UTF-32BE    .utf32be
+AddCharset UTF-32LE    .utf32le
+AddCharset euc-cn      .euc-cn
+AddCharset euc-gb      .euc-gb
+AddCharset euc-jp      .euc-jp
+AddCharset euc-kr      .euc-kr
+#Not sure how euc-tw got in - IANA doesn't list it???
+AddCharset EUC-TW      .euc-tw
+AddCharset gb2312      .gb2312 .gb
+AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
+AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
+AddCharset shift_jis   .shift_jis .sjis
+
+#
+# AddHandler allows you to map certain file extensions to "handlers":
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action directive (see below)
+#
+# To use CGI scripts outside of ScriptAliased directories:
+# (You will also need to add "ExecCGI" to the "Options" directive.)
+#
+#AddHandler cgi-script .cgi
+
+#
+# For files that include their own HTTP headers:
+#
+#AddHandler send-as-is asis
+
+#
+# For server-parsed imagemap files:
+#
+#AddHandler imap-file map
+
+#
+# For type maps (negotiated resources):
+# (This is enabled by default to allow the Apache "It Worked" page
+#  to be distributed in multiple languages.)
+#
+AddHandler type-map var
+
+#
+# Filters allow you to process content before it is sent to the client.
+#
+# To parse .shtml files for server-side includes (SSI):
+# (You will also need to add "Includes" to the "Options" directive.)
+#
+AddType text/html .shtml
+AddOutputFilter INCLUDES .shtml
+
+</IfModule>

data/cookbooks/apache2/templates/default/mods/negotiation.conf.erb

@@ -0,0 +1,18 @@
+<IfModule mod_negotiation.c>
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+#
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv tr zh-CN zh-TW
+
+#
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+#
+ForceLanguagePriority Prefer Fallback
+
+</IfModule>

data/cookbooks/apache2/templates/default/mods/php5.conf.erb

@@ -0,0 +1,16 @@
+<IfModule mod_php5.c>
+    <FilesMatch "\.ph(p3?|tml)$">
+	SetHandler application/x-httpd-php
+    </FilesMatch>
+    <FilesMatch "\.phps$">
+	SetHandler application/x-httpd-php-source
+    </FilesMatch>
+    # To re-enable php in user directories comment the following lines
+    # (from <IfModule ...> to </IfModule>.) Do NOT set it to On as it
+    # prevents .htaccess files from disabling it.
+    <IfModule mod_userdir.c>
+        <Directory /home/*/public_html>
+            php_admin_value engine Off
+        </Directory>
+    </IfModule>
+</IfModule>