urbanopt-cli 0.5.1 → 0.5.2

data/example_files/measures/ResidentialGeometryCreateSingleFamilyDetached/measure.rb

@@ -1,979 +0,0 @@
-# see the URL below for information on how to write OpenStudio measures
-# http://nrel.github.io/OpenStudio-user-documentation/measures/measure_writing_guide/
-
-resources_path = File.absolute_path(File.join(File.dirname(__FILE__), "../BuildResidentialModel/resources"))
-require File.join(resources_path, "constants")
-require File.join(resources_path, "geometry")
-require File.join(resources_path, "unit_conversions")
-
-# start the measure
-class CreateResidentialSingleFamilyDetachedGeometry < OpenStudio::Measure::ModelMeasure
-  # human readable name
-  def name
-    return "Create Residential Single-Family Detached Geometry"
-  end
-
-  # human readable description
-  def description
-    return "Sets the basic geometry for the single-family detached building. Building is limited to one foundation type. Garage is tucked within the building, on the front left or front right corners of the building. Sets the number of bedrooms, bathrooms, and occupants in the building. Sets the neighbors (front, back, left, and/or right) of the building for shading purposes. Neighboring buildings will have the same geometry as the model building.#{WholeBuildingConstants.WorkflowDescription}"
-  end
-
-  # human readable description of modeling approach
-  def modeler_description
-    return "Gathers living space area, wall height per floor, number of floors, aspect ratio, garage width and depth, garage position, foundation type and wall height, attic and roof type, and roof pitch. Constructs building by calculating footprint and performing a series of affine transformations into living, foundation, and attic spaces. Also, sets (or replaces) BuildingUnit objects that store the number of bedrooms and bathrooms associated with the model. Sets (or replaces) the People object for each finished space in the model. Creates shading surfaces by shifting the building's exterior surfaces in the specified directions (front, back, left, and/or right)."
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # make an argument for total living space floor area
-    total_ffa = OpenStudio::Measure::OSArgument::makeDoubleArgument("total_ffa", true)
-    total_ffa.setDisplayName("Total Finished Floor Area")
-    total_ffa.setUnits("ft^2")
-    total_ffa.setDescription("The total floor area of the finished space (including any finished basement floor area).")
-    total_ffa.setDefaultValue(2000.0)
-    args << total_ffa
-
-    # make an argument for living space height
-    wall_height = OpenStudio::Measure::OSArgument::makeDoubleArgument("wall_height", true)
-    wall_height.setDisplayName("Wall Height (Per Floor)")
-    wall_height.setUnits("ft")
-    wall_height.setDescription("The height of the living space (and garage) walls.")
-    wall_height.setDefaultValue(8.0)
-    args << wall_height
-
-    # make an argument for number of floors
-    num_floors = OpenStudio::Measure::OSArgument::makeIntegerArgument("num_floors", true)
-    num_floors.setDisplayName("Number of Floors")
-    num_floors.setUnits("#")
-    num_floors.setDescription("The number of floors above grade.")
-    num_floors.setDefaultValue(2)
-    args << num_floors
-
-    # make an argument for aspect ratio
-    aspect_ratio = OpenStudio::Measure::OSArgument::makeDoubleArgument("aspect_ratio", true)
-    aspect_ratio.setDisplayName("Aspect Ratio")
-    aspect_ratio.setUnits("FB/LR")
-    aspect_ratio.setDescription("The ratio of the front/back wall length to the left/right wall length, excluding any protruding garage wall area.")
-    aspect_ratio.setDefaultValue(2.0)
-    args << aspect_ratio
-
-    # make a double argument for garage area
-    garage_width = OpenStudio::Measure::OSArgument::makeDoubleArgument("garage_width", true)
-    garage_width.setDisplayName("Garage Width")
-    garage_width.setUnits("ft")
-    garage_width.setDescription("The width of the garage.")
-    garage_width.setDefaultValue(0.0)
-    args << garage_width
-
-    # make a double argument for garage height
-    garage_depth = OpenStudio::Measure::OSArgument::makeDoubleArgument("garage_depth", true)
-    garage_depth.setDisplayName("Garage Depth")
-    garage_depth.setUnits("ft")
-    garage_depth.setDescription("The depth of the garage.")
-    garage_depth.setDefaultValue(20.0)
-    args << garage_depth
-
-    # make a double argument for garage protrusion
-    garage_protrusion = OpenStudio::Measure::OSArgument::makeDoubleArgument("garage_protrusion", true)
-    garage_protrusion.setDisplayName("Garage Protrusion")
-    garage_protrusion.setUnits("frac")
-    garage_protrusion.setDescription("The fraction of the garage that is protruding from the living space.")
-    garage_protrusion.setDefaultValue(0.0)
-    args << garage_protrusion
-
-    # make a choice argument for model objects
-    garage_position_display_names = OpenStudio::StringVector.new
-    garage_position_display_names << "Right"
-    garage_position_display_names << "Left"
-
-    # make a choice argument for garage position
-    garage_position = OpenStudio::Measure::OSArgument::makeChoiceArgument("garage_position", garage_position_display_names, true)
-    garage_position.setDisplayName("Garage Position")
-    garage_position.setDescription("The position of the garage.")
-    garage_position.setDefaultValue("Right")
-    args << garage_position
-
-    # make a choice argument for model objects
-    foundation_display_names = OpenStudio::StringVector.new
-    foundation_display_names << "slab"
-    foundation_display_names << "crawlspace"
-    foundation_display_names << "unfinished basement"
-    foundation_display_names << "finished basement"
-    foundation_display_names << "pier and beam"
-
-    # make a choice argument for foundation type
-    foundation_type = OpenStudio::Measure::OSArgument::makeChoiceArgument("foundation_type", foundation_display_names, true)
-    foundation_type.setDisplayName("Foundation Type")
-    foundation_type.setDescription("The foundation type of the building.")
-    foundation_type.setDefaultValue("slab")
-    args << foundation_type
-
-    # make an argument for crawlspace height
-    foundation_height = OpenStudio::Measure::OSArgument::makeDoubleArgument("foundation_height", true)
-    foundation_height.setDisplayName("Foundation Height")
-    foundation_height.setUnits("ft")
-    foundation_height.setDescription("The height of the foundation (e.g., 3ft for crawlspace, 8ft for basement).")
-    foundation_height.setDefaultValue(3.0)
-    args << foundation_height
-
-    # make a choice argument for model objects
-    attic_type_display_names = OpenStudio::StringVector.new
-    attic_type_display_names << "unfinished attic"
-    attic_type_display_names << "finished attic"
-
-    # make a choice argument for attic type
-    attic_type = OpenStudio::Measure::OSArgument::makeChoiceArgument("attic_type", attic_type_display_names, true)
-    attic_type.setDisplayName("Attic Type")
-    attic_type.setDescription("The attic type of the building. Ignored if the building has a flat roof.")
-    attic_type.setDefaultValue("unfinished attic")
-    args << attic_type
-
-    # make a choice argument for model objects
-    roof_type_display_names = OpenStudio::StringVector.new
-    roof_type_display_names << WholeBuildingConstants.RoofTypeGable
-    roof_type_display_names << WholeBuildingConstants.RoofTypeHip
-    roof_type_display_names << WholeBuildingConstants.RoofTypeFlat
-
-    # make a choice argument for roof type
-    roof_type = OpenStudio::Measure::OSArgument::makeChoiceArgument("roof_type", roof_type_display_names, true)
-    roof_type.setDisplayName("Roof Type")
-    roof_type.setDescription("The roof type of the building.")
-    roof_type.setDefaultValue(WholeBuildingConstants.RoofTypeGable)
-    args << roof_type
-
-    # make a choice argument for model objects
-    roof_pitch_display_names = OpenStudio::StringVector.new
-    roof_pitch_display_names << "1:12"
-    roof_pitch_display_names << "2:12"
-    roof_pitch_display_names << "3:12"
-    roof_pitch_display_names << "4:12"
-    roof_pitch_display_names << "5:12"
-    roof_pitch_display_names << "6:12"
-    roof_pitch_display_names << "7:12"
-    roof_pitch_display_names << "8:12"
-    roof_pitch_display_names << "9:12"
-    roof_pitch_display_names << "10:12"
-    roof_pitch_display_names << "11:12"
-    roof_pitch_display_names << "12:12"
-
-    # make a choice argument for roof pitch
-    roof_pitch = OpenStudio::Measure::OSArgument::makeChoiceArgument("roof_pitch", roof_pitch_display_names, true)
-    roof_pitch.setDisplayName("Roof Pitch")
-    roof_pitch.setDescription("The roof pitch of the attic. Ignored if the building has a flat roof.")
-    roof_pitch.setDefaultValue("6:12")
-    args << roof_pitch
-
-    # make a choice argument for model objects
-    roof_structure_display_names = OpenStudio::StringVector.new
-    roof_structure_display_names << WholeBuildingConstants.RoofStructureTrussCantilever
-    roof_structure_display_names << WholeBuildingConstants.RoofStructureRafter
-
-    # make a choice argument for roof type
-    roof_structure = OpenStudio::Measure::OSArgument::makeChoiceArgument("roof_structure", roof_structure_display_names, true)
-    roof_structure.setDisplayName("Roof Structure")
-    roof_structure.setDescription("The roof structure of the building.")
-    roof_structure.setDefaultValue(WholeBuildingConstants.RoofStructureTrussCantilever)
-    args << roof_structure
-
-    # make a choice argument for eaves depth
-    eaves_depth = OpenStudio::Measure::OSArgument::makeDoubleArgument("eaves_depth", true)
-    eaves_depth.setDisplayName("Eaves Depth")
-    eaves_depth.setUnits("ft")
-    eaves_depth.setDescription("The eaves depth of the roof.")
-    eaves_depth.setDefaultValue(2.0)
-    args << eaves_depth
-
-    # make a string argument for number of bedrooms
-    num_br = OpenStudio::Measure::OSArgument::makeStringArgument("num_bedrooms", true)
-    num_br.setDisplayName("Number of Bedrooms")
-    num_br.setDescription("Specify the number of bedrooms. Used to determine the energy usage of appliances and plug loads, hot water usage, mechanical ventilation rate, etc.")
-    num_br.setDefaultValue("3")
-    args << num_br
-
-    # make a string argument for number of bathrooms
-    num_ba = OpenStudio::Measure::OSArgument::makeStringArgument("num_bathrooms", true)
-    num_ba.setDisplayName("Number of Bathrooms")
-    num_ba.setDescription("Specify the number of bathrooms. Used to determine the hot water usage, etc.")
-    num_ba.setDefaultValue("2")
-    args << num_ba
-
-    # make a double argument for left neighbor offset
-    neighbor_left_offset = OpenStudio::Measure::OSArgument::makeDoubleArgument("neighbor_left_offset", true)
-    neighbor_left_offset.setDisplayName("Neighbor Left Offset")
-    neighbor_left_offset.setUnits("ft")
-    neighbor_left_offset.setDescription("The minimum distance between the simulated house and the neighboring house to the left (not including eaves). A value of zero indicates no neighbors.")
-    neighbor_left_offset.setDefaultValue(10.0)
-    args << neighbor_left_offset
-
-    # make a double argument for right neighbor offset
-    neighbor_right_offset = OpenStudio::Measure::OSArgument::makeDoubleArgument("neighbor_right_offset", true)
-    neighbor_right_offset.setDisplayName("Neighbor Right Offset")
-    neighbor_right_offset.setUnits("ft")
-    neighbor_right_offset.setDescription("The minimum distance between the simulated house and the neighboring house to the right (not including eaves). A value of zero indicates no neighbors.")
-    neighbor_right_offset.setDefaultValue(10.0)
-    args << neighbor_right_offset
-
-    # make a double argument for back neighbor offset
-    neighbor_back_offset = OpenStudio::Measure::OSArgument::makeDoubleArgument("neighbor_back_offset", true)
-    neighbor_back_offset.setDisplayName("Neighbor Back Offset")
-    neighbor_back_offset.setUnits("ft")
-    neighbor_back_offset.setDescription("The minimum distance between the simulated house and the neighboring house to the back (not including eaves). A value of zero indicates no neighbors.")
-    neighbor_back_offset.setDefaultValue(0.0)
-    args << neighbor_back_offset
-
-    # make a double argument for front neighbor offset
-    neighbor_front_offset = OpenStudio::Measure::OSArgument::makeDoubleArgument("neighbor_front_offset", true)
-    neighbor_front_offset.setDisplayName("Neighbor Front Offset")
-    neighbor_front_offset.setUnits("ft")
-    neighbor_front_offset.setDescription("The minimum distance between the simulated house and the neighboring house to the front (not including eaves). A value of zero indicates no neighbors.")
-    neighbor_front_offset.setDefaultValue(0.0)
-    args << neighbor_front_offset
-
-    # make a double argument for orientation
-    orientation = OpenStudio::Measure::OSArgument::makeDoubleArgument("orientation", true)
-    orientation.setDisplayName("Azimuth")
-    orientation.setUnits("degrees")
-    orientation.setDescription("The house's azimuth is measured clockwise from due south when viewed from above (e.g., South=0, West=90, North=180, East=270).")
-    orientation.setDefaultValue(180.0)
-    args << orientation
-
-    return args
-  end
-
-  # define what happens when the measure is run
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    total_ffa = runner.getDoubleArgumentValue("total_ffa", user_arguments)
-    wall_height = runner.getDoubleArgumentValue("wall_height", user_arguments)
-    num_floors = runner.getIntegerArgumentValue("num_floors", user_arguments)
-    aspect_ratio = runner.getDoubleArgumentValue("aspect_ratio", user_arguments)
-    garage_width = runner.getDoubleArgumentValue("garage_width", user_arguments)
-    garage_depth = runner.getDoubleArgumentValue("garage_depth", user_arguments)
-    garage_protrusion = runner.getDoubleArgumentValue("garage_protrusion", user_arguments)
-    garage_position = runner.getStringArgumentValue("garage_position", user_arguments)
-    foundation_type = runner.getStringArgumentValue("foundation_type", user_arguments)
-    foundation_height = runner.getDoubleArgumentValue("foundation_height", user_arguments)
-    attic_type = runner.getStringArgumentValue("attic_type", user_arguments)
-    roof_type = runner.getStringArgumentValue("roof_type", user_arguments)
-    roof_pitch = { "1:12" => 1.0 / 12.0, "2:12" => 2.0 / 12.0, "3:12" => 3.0 / 12.0, "4:12" => 4.0 / 12.0, "5:12" => 5.0 / 12.0, "6:12" => 6.0 / 12.0, "7:12" => 7.0 / 12.0, "8:12" => 8.0 / 12.0, "9:12" => 9.0 / 12.0, "10:12" => 10.0 / 12.0, "11:12" => 11.0 / 12.0, "12:12" => 12.0 / 12.0 }[runner.getStringArgumentValue("roof_pitch", user_arguments)]
-    roof_structure = runner.getStringArgumentValue("roof_structure", user_arguments)
-    eaves_depth = WholeBuildingUnitConversions.convert(runner.getDoubleArgumentValue("eaves_depth", user_arguments), "ft", "m")
-    num_br = runner.getStringArgumentValue("num_bedrooms", user_arguments).split(",").map(&:strip)
-    num_ba = runner.getStringArgumentValue("num_bathrooms", user_arguments).split(",").map(&:strip)
-    num_occupants = WholeBuildingConstants.Auto
-    if model.getBuilding.additionalProperties.getFeatureAsInteger("num_occupants").is_initialized
-      num_occupants = "#{model.getBuilding.additionalProperties.getFeatureAsInteger("num_occupants").get}"
-    end
-    neighbor_left_offset = WholeBuildingUnitConversions.convert(runner.getDoubleArgumentValue("neighbor_left_offset", user_arguments), "ft", "m")
-    neighbor_right_offset = WholeBuildingUnitConversions.convert(runner.getDoubleArgumentValue("neighbor_right_offset", user_arguments), "ft", "m")
-    neighbor_back_offset = WholeBuildingUnitConversions.convert(runner.getDoubleArgumentValue("neighbor_back_offset", user_arguments), "ft", "m")
-    neighbor_front_offset = WholeBuildingUnitConversions.convert(runner.getDoubleArgumentValue("neighbor_front_offset", user_arguments), "ft", "m")
-    orientation = runner.getDoubleArgumentValue("orientation", user_arguments)
-
-    if foundation_type == "slab"
-      foundation_height = 0.0
-    end
-
-    # error checking
-    if model.getSpaces.size > 0
-      runner.registerError("Starting model is not empty.")
-      return false
-    end
-    if aspect_ratio < 0
-      runner.registerError("Invalid aspect ratio entered.")
-      return false
-    end
-    if foundation_type == "pier and beam" and (foundation_height <= 0.0)
-      runner.registerError("The pier & beam height must be greater than 0 ft.")
-      return false
-    end
-    if num_floors > 6
-      runner.registerError("Too many floors.")
-      return false
-    end
-    if garage_protrusion < 0 or garage_protrusion > 1
-      runner.registerError("Invalid garage protrusion value entered.")
-      return false
-    end
-
-    # Convert to SI
-    total_ffa = WholeBuildingUnitConversions.convert(total_ffa, "ft^2", "m^2")
-    wall_height = WholeBuildingUnitConversions.convert(wall_height, "ft", "m")
-    garage_width = WholeBuildingUnitConversions.convert(garage_width, "ft", "m")
-    garage_depth = WholeBuildingUnitConversions.convert(garage_depth, "ft", "m")
-    foundation_height = WholeBuildingUnitConversions.convert(foundation_height, "ft", "m")
-
-    garage_area = garage_width * garage_depth
-    has_garage = false
-    if garage_area > 0
-      has_garage = true
-    end
-
-    # error checking
-    if garage_protrusion > 0 and roof_type == WholeBuildingConstants.RoofTypeHip and has_garage
-      runner.registerError("Cannot handle protruding garage and hip roof.")
-      return false
-    end
-    if garage_protrusion > 0 and aspect_ratio < 1 and has_garage and roof_type == WholeBuildingConstants.RoofTypeGable
-      runner.registerError("Cannot handle protruding garage and attic ridge running from front to back.")
-      return false
-    end
-    if foundation_type == "pier and beam" and has_garage
-      runner.registerError("Cannot handle garages with a pier & beam foundation type.")
-      return false
-    end
-
-    # calculate the footprint of the building
-    garage_area_inside_footprint = 0
-    if has_garage
-      garage_area_inside_footprint = garage_area * (1.0 - garage_protrusion)
-    end
-    bonus_area_above_garage = garage_area * garage_protrusion
-    if foundation_type == "finished basement" and attic_type == "finished attic"
-      footprint = (total_ffa + 2 * garage_area_inside_footprint - (num_floors) * bonus_area_above_garage) / (num_floors + 2)
-    elsif foundation_type == "finished basement"
-      footprint = (total_ffa + 2 * garage_area_inside_footprint - (num_floors - 1) * bonus_area_above_garage) / (num_floors + 1)
-    elsif attic_type == "finished attic"
-      footprint = (total_ffa + garage_area_inside_footprint - (num_floors) * bonus_area_above_garage) / (num_floors + 1)
-    else
-      footprint = (total_ffa + garage_area_inside_footprint - (num_floors - 1) * bonus_area_above_garage) / num_floors
-    end
-
-    # calculate the dimensions of the building
-    width = Math.sqrt(footprint / aspect_ratio)
-    length = footprint / width
-
-    # error checking
-    if (garage_width > length and garage_depth > 0) or (((1.0 - garage_protrusion) * garage_depth) > width and garage_width > 0) or (((1.0 - garage_protrusion) * garage_depth) == width and garage_width == length)
-      runner.registerError("Invalid living space and garage dimensions.")
-      return false
-    end
-
-    # starting spaces
-    runner.registerInitialCondition("The building started with #{model.getSpaces.size} spaces.")
-
-    # create living zone
-    living_zone = OpenStudio::Model::ThermalZone.new(model)
-    living_zone.setName("living zone")
-
-    foundation_offset = 0.0
-    if foundation_type == "pier and beam"
-      foundation_offset = foundation_height
-    end
-
-    space_types_hash = {}
-
-    # loop through the number of floors
-    foundation_polygon_with_wrong_zs = nil
-    for floor in (0..num_floors - 1)
-
-      z = wall_height * floor + foundation_offset
-
-      if has_garage and z == foundation_offset # first floor and has garage
-
-        # create garage zone
-        garage_zone = OpenStudio::Model::ThermalZone.new(model)
-        garage_zone.setName("garage zone")
-
-        # make points and polygons
-        if garage_position == "Right"
-          garage_sw_point = OpenStudio::Point3d.new(length - garage_width, -garage_protrusion * garage_depth, z)
-          garage_nw_point = OpenStudio::Point3d.new(length - garage_width, garage_depth - garage_protrusion * garage_depth, z)
-          garage_ne_point = OpenStudio::Point3d.new(length, garage_depth - garage_protrusion * garage_depth, z)
-          garage_se_point = OpenStudio::Point3d.new(length, -garage_protrusion * garage_depth, z)
-          garage_polygon = WholeBuildingGeometry.make_polygon(garage_sw_point, garage_nw_point, garage_ne_point, garage_se_point)
-        elsif garage_position == "Left"
-          garage_sw_point = OpenStudio::Point3d.new(0, -garage_protrusion * garage_depth, z)
-          garage_nw_point = OpenStudio::Point3d.new(0, garage_depth - garage_protrusion * garage_depth, z)
-          garage_ne_point = OpenStudio::Point3d.new(garage_width, garage_depth - garage_protrusion * garage_depth, z)
-          garage_se_point = OpenStudio::Point3d.new(garage_width, -garage_protrusion * garage_depth, z)
-          garage_polygon = WholeBuildingGeometry.make_polygon(garage_sw_point, garage_nw_point, garage_ne_point, garage_se_point)
-        end
-
-        # make space
-        garage_space = OpenStudio::Model::Space::fromFloorPrint(garage_polygon, wall_height, model)
-        garage_space = garage_space.get
-        garage_space_name = "garage space"
-        garage_space.setName(garage_space_name)
-        if space_types_hash.keys.include? WholeBuildingConstants.SpaceTypeGarage
-          garage_space_type = space_types_hash[WholeBuildingConstants.SpaceTypeGarage]
-        else
-          garage_space_type = OpenStudio::Model::SpaceType.new(model)
-          garage_space_type.setStandardsSpaceType(WholeBuildingConstants.SpaceTypeGarage)
-          space_types_hash[WholeBuildingConstants.SpaceTypeGarage] = garage_space_type
-        end
-        garage_space.setSpaceType(garage_space_type)
-        runner.registerInfo("Set #{garage_space_name}.")
-
-        # set this to the garage zone
-        garage_space.setThermalZone(garage_zone)
-
-        m = WholeBuildingGeometry.initialize_transformation_matrix(OpenStudio::Matrix.new(4, 4, 0))
-        m[0, 3] = 0
-        m[1, 3] = 0
-        m[2, 3] = z
-        garage_space.changeTransformation(OpenStudio::Transformation.new(m))
-
-        if garage_position == "Right"
-          sw_point = OpenStudio::Point3d.new(0, 0, z)
-          nw_point = OpenStudio::Point3d.new(0, width, z)
-          ne_point = OpenStudio::Point3d.new(length, width, z)
-          se_point = OpenStudio::Point3d.new(length, 0, z)
-          l_se_point = OpenStudio::Point3d.new(length - garage_width, 0, z)
-          if (garage_depth < width or garage_protrusion > 0) and garage_protrusion < 1 # garage protrudes but not fully
-            living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, garage_ne_point, garage_nw_point, l_se_point)
-          elsif garage_protrusion < 1 # garage fits perfectly within living space
-            living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, garage_nw_point, garage_sw_point)
-          else # garage fully protrudes
-            living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, se_point)
-          end
-        elsif garage_position == "Left"
-          sw_point = OpenStudio::Point3d.new(0, 0, z)
-          nw_point = OpenStudio::Point3d.new(0, width, z)
-          ne_point = OpenStudio::Point3d.new(length, width, z)
-          se_point = OpenStudio::Point3d.new(length, 0, z)
-          l_sw_point = OpenStudio::Point3d.new(garage_width, 0, z)
-          if (garage_depth < width or garage_protrusion > 0) and garage_protrusion < 1 # garage protrudes but not fully
-            living_polygon = WholeBuildingGeometry.make_polygon(garage_nw_point, nw_point, ne_point, se_point, l_sw_point, garage_ne_point)
-          elsif garage_protrusion < 1 # garage fits perfectly within living space
-            living_polygon = WholeBuildingGeometry.make_polygon(garage_se_point, garage_ne_point, ne_point, se_point)
-          else # garage fully protrudes
-            living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, se_point)
-          end
-        end
-        foundation_polygon_with_wrong_zs = living_polygon
-
-      else # first floor without garage or above first floor
-
-        if has_garage
-          garage_se_point = OpenStudio::Point3d.new(garage_se_point.x, garage_se_point.y, wall_height * floor + foundation_offset)
-          garage_sw_point = OpenStudio::Point3d.new(garage_sw_point.x, garage_sw_point.y, wall_height * floor + foundation_offset)
-          garage_nw_point = OpenStudio::Point3d.new(garage_nw_point.x, garage_nw_point.y, wall_height * floor + foundation_offset)
-          garage_ne_point = OpenStudio::Point3d.new(garage_ne_point.x, garage_ne_point.y, wall_height * floor + foundation_offset)
-          if garage_position == "Right"
-            sw_point = OpenStudio::Point3d.new(0, 0, z)
-            nw_point = OpenStudio::Point3d.new(0, width, z)
-            ne_point = OpenStudio::Point3d.new(length, width, z)
-            se_point = OpenStudio::Point3d.new(length, 0, z)
-            l_se_point = OpenStudio::Point3d.new(length - garage_width, 0, z)
-            if garage_protrusion > 0 # garage protrudes
-              living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, garage_se_point, garage_sw_point, l_se_point)
-            else # garage does not protrude
-              living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, se_point)
-            end
-          elsif garage_position == "Left"
-            sw_point = OpenStudio::Point3d.new(0, 0, z)
-            nw_point = OpenStudio::Point3d.new(0, width, z)
-            ne_point = OpenStudio::Point3d.new(length, width, z)
-            se_point = OpenStudio::Point3d.new(length, 0, z)
-            l_sw_point = OpenStudio::Point3d.new(garage_width, 0, z)
-            if garage_protrusion > 0 # garage protrudes
-              living_polygon = WholeBuildingGeometry.make_polygon(garage_sw_point, nw_point, ne_point, se_point, l_sw_point, garage_se_point)
-            else # garage does not protrude
-              living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, se_point)
-            end
-          end
-
-        else
-
-          sw_point = OpenStudio::Point3d.new(0, 0, z)
-          nw_point = OpenStudio::Point3d.new(0, width, z)
-          ne_point = OpenStudio::Point3d.new(length, width, z)
-          se_point = OpenStudio::Point3d.new(length, 0, z)
-          living_polygon = WholeBuildingGeometry.make_polygon(sw_point, nw_point, ne_point, se_point)
-          if z == foundation_offset
-            foundation_polygon_with_wrong_zs = living_polygon
-          end
-
-        end
-
-      end
-
-      # make space
-      living_space = OpenStudio::Model::Space::fromFloorPrint(living_polygon, wall_height, model)
-      living_space = living_space.get
-      if floor > 0
-        living_space_name = "living space|story #{floor + 1}"
-      else
-        living_space_name = "living space"
-      end
-      living_space.setName(living_space_name)
-      if space_types_hash.keys.include? WholeBuildingConstants.SpaceTypeLiving
-        living_space_type = space_types_hash[WholeBuildingConstants.SpaceTypeLiving]
-      else
-        living_space_type = OpenStudio::Model::SpaceType.new(model)
-        living_space_type.setStandardsSpaceType(WholeBuildingConstants.SpaceTypeLiving)
-        space_types_hash[WholeBuildingConstants.SpaceTypeLiving] = living_space_type
-      end
-      living_space.setSpaceType(living_space_type)
-      runner.registerInfo("Set #{living_space_name}.")
-
-      # set these to the living zone
-      living_space.setThermalZone(living_zone)
-
-      m = WholeBuildingGeometry.initialize_transformation_matrix(OpenStudio::Matrix.new(4, 4, 0))
-      m[0, 3] = 0
-      m[1, 3] = 0
-      m[2, 3] = z
-      living_space.changeTransformation(OpenStudio::Transformation.new(m))
-
-    end
-
-    # Attic
-    if roof_type != WholeBuildingConstants.RoofTypeFlat
-
-      z = z + wall_height
-
-      # calculate the dimensions of the attic
-      if length >= width
-        attic_height = (width / 2.0) * roof_pitch
-      else
-        attic_height = (length / 2.0) * roof_pitch
-      end
-
-      # make points
-      roof_nw_point = OpenStudio::Point3d.new(0, width, z)
-      roof_ne_point = OpenStudio::Point3d.new(length, width, z)
-      roof_se_point = OpenStudio::Point3d.new(length, 0, z)
-      roof_sw_point = OpenStudio::Point3d.new(0, 0, z)
-
-      # make polygons
-      polygon_floor = WholeBuildingGeometry.make_polygon(roof_nw_point, roof_ne_point, roof_se_point, roof_sw_point)
-      side_type = nil
-      if roof_type == WholeBuildingConstants.RoofTypeGable
-        if length >= width
-          roof_w_point = OpenStudio::Point3d.new(0, width / 2.0, z + attic_height)
-          roof_e_point = OpenStudio::Point3d.new(length, width / 2.0, z + attic_height)
-          polygon_s_roof = WholeBuildingGeometry.make_polygon(roof_e_point, roof_w_point, roof_sw_point, roof_se_point)
-          polygon_n_roof = WholeBuildingGeometry.make_polygon(roof_w_point, roof_e_point, roof_ne_point, roof_nw_point)
-          polygon_w_wall = WholeBuildingGeometry.make_polygon(roof_w_point, roof_nw_point, roof_sw_point)
-          polygon_e_wall = WholeBuildingGeometry.make_polygon(roof_e_point, roof_se_point, roof_ne_point)
-        else
-          roof_w_point = OpenStudio::Point3d.new(length / 2.0, 0, z + attic_height)
-          roof_e_point = OpenStudio::Point3d.new(length / 2.0, width, z + attic_height)
-          polygon_s_roof = WholeBuildingGeometry.make_polygon(roof_e_point, roof_w_point, roof_se_point, roof_ne_point)
-          polygon_n_roof = WholeBuildingGeometry.make_polygon(roof_w_point, roof_e_point, roof_nw_point, roof_sw_point)
-          polygon_w_wall = WholeBuildingGeometry.make_polygon(roof_w_point, roof_sw_point, roof_se_point)
-          polygon_e_wall = WholeBuildingGeometry.make_polygon(roof_e_point, roof_ne_point, roof_nw_point)
-        end
-        side_type = "Wall"
-      elsif roof_type == WholeBuildingConstants.RoofTypeHip
-        if length >= width
-          roof_w_point = OpenStudio::Point3d.new(width / 2.0, width / 2.0, z + attic_height)
-          roof_e_point = OpenStudio::Point3d.new(length - width / 2.0, width / 2.0, z + attic_height)
-          polygon_s_roof = WholeBuildingGeometry.make_polygon(roof_e_point, roof_w_point, roof_sw_point, roof_se_point)
-          polygon_n_roof = WholeBuildingGeometry.make_polygon(roof_w_point, roof_e_point, roof_ne_point, roof_nw_point)
-          polygon_w_wall = WholeBuildingGeometry.make_polygon(roof_w_point, roof_nw_point, roof_sw_point)
-          polygon_e_wall = WholeBuildingGeometry.make_polygon(roof_e_point, roof_se_point, roof_ne_point)
-        else
-          roof_w_point = OpenStudio::Point3d.new(length / 2.0, length / 2.0, z + attic_height)
-          roof_e_point = OpenStudio::Point3d.new(length / 2.0, width - length / 2.0, z + attic_height)
-          polygon_s_roof = WholeBuildingGeometry.make_polygon(roof_e_point, roof_w_point, roof_se_point, roof_ne_point)
-          polygon_n_roof = WholeBuildingGeometry.make_polygon(roof_w_point, roof_e_point, roof_nw_point, roof_sw_point)
-          polygon_w_wall = WholeBuildingGeometry.make_polygon(roof_w_point, roof_sw_point, roof_se_point)
-          polygon_e_wall = WholeBuildingGeometry.make_polygon(roof_e_point, roof_ne_point, roof_nw_point)
-        end
-        side_type = "RoofCeiling"
-      end
-
-      # make surfaces
-      surface_floor = OpenStudio::Model::Surface.new(polygon_floor, model)
-      surface_floor.setSurfaceType("Floor")
-      surface_floor.setOutsideBoundaryCondition("Surface")
-      surface_s_roof = OpenStudio::Model::Surface.new(polygon_s_roof, model)
-      surface_s_roof.setSurfaceType("RoofCeiling")
-      surface_s_roof.setOutsideBoundaryCondition("Outdoors")
-      surface_n_roof = OpenStudio::Model::Surface.new(polygon_n_roof, model)
-      surface_n_roof.setSurfaceType("RoofCeiling")
-      surface_n_roof.setOutsideBoundaryCondition("Outdoors")
-      surface_w_wall = OpenStudio::Model::Surface.new(polygon_w_wall, model)
-      surface_w_wall.setSurfaceType(side_type)
-      surface_w_wall.setOutsideBoundaryCondition("Outdoors")
-      surface_e_wall = OpenStudio::Model::Surface.new(polygon_e_wall, model)
-      surface_e_wall.setSurfaceType(side_type)
-      surface_e_wall.setOutsideBoundaryCondition("Outdoors")
-
-      # assign surfaces to the space
-      attic_space = OpenStudio::Model::Space.new(model)
-      surface_floor.setSpace(attic_space)
-      surface_s_roof.setSpace(attic_space)
-      surface_n_roof.setSpace(attic_space)
-      surface_w_wall.setSpace(attic_space)
-      surface_e_wall.setSpace(attic_space)
-
-      # set these to the attic zone
-      if attic_type == "unfinished attic"
-        # create attic zone
-        attic_zone = OpenStudio::Model::ThermalZone.new(model)
-        attic_zone.setName("unfinished attic zone")
-        attic_space.setThermalZone(attic_zone)
-        attic_space_name = "unfinished attic space"
-        attic_space_type_name = WholeBuildingConstants.SpaceTypeUnfinishedAttic
-      elsif attic_type == "finished attic"
-        attic_space.setThermalZone(living_zone)
-        attic_space_name = "finished attic space"
-        attic_space_type_name = WholeBuildingConstants.SpaceTypeLiving
-      end
-      attic_space.setName(attic_space_name)
-      if space_types_hash.keys.include? attic_space_type_name
-        attic_space_type = space_types_hash[attic_space_type_name]
-      else
-        attic_space_type = OpenStudio::Model::SpaceType.new(model)
-        attic_space_type.setStandardsSpaceType(attic_space_type_name)
-        space_types_hash[attic_space_type_name] = attic_space_type
-      end
-      attic_space.setSpaceType(attic_space_type)
-      runner.registerInfo("Set #{attic_space_name}.")
-
-      m = WholeBuildingGeometry.initialize_transformation_matrix(OpenStudio::Matrix.new(4, 4, 0))
-      m[0, 3] = 0
-      m[1, 3] = 0
-      m[2, 3] = z
-      attic_space.changeTransformation(OpenStudio::Transformation.new(m))
-
-    end
-
-    # Foundation
-    if ["crawlspace", "unfinished basement", "finished basement", "pier and beam"].include? foundation_type
-
-      z = -foundation_height + foundation_offset
-
-      # create foundation zone
-      foundation_zone = OpenStudio::Model::ThermalZone.new(model)
-      if foundation_type == "crawlspace"
-        foundation_zone_name = "crawl zone"
-      elsif foundation_type == "unfinished basement"
-        foundation_zone_name = "unfinished basement zone"
-      elsif foundation_type == "finished basement"
-        foundation_zone_name = "finished basement zone"
-      elsif foundation_type == "pier and beam"
-        foundation_zone_name = "pier and beam zone"
-      end
-      foundation_zone.setName(foundation_zone_name)
-
-      # make polygons
-      p = OpenStudio::Point3dVector.new
-      foundation_polygon_with_wrong_zs.each do |point|
-        p << OpenStudio::Point3d.new(point.x, point.y, z)
-      end
-      foundation_polygon = p
-
-      # make space
-      foundation_space = OpenStudio::Model::Space::fromFloorPrint(foundation_polygon, foundation_height, model)
-      foundation_space = foundation_space.get
-      if foundation_type == "crawlspace"
-        foundation_space_name = "crawl space"
-        foundation_space_type_name = WholeBuildingConstants.SpaceTypeCrawl
-      elsif foundation_type == "unfinished basement"
-        foundation_space_name = "unfinished basement space"
-        foundation_space_type_name = WholeBuildingConstants.SpaceTypeUnfinishedBasement
-      elsif foundation_type == "finished basement"
-        foundation_space_name = "finished basement space"
-        foundation_space_type_name = WholeBuildingConstants.SpaceTypeFinishedBasement
-      elsif foundation_type == "pier and beam"
-        foundation_space_name = "pier and beam space"
-        foundation_space_type_name = WholeBuildingConstants.SpaceTypePierBeam
-      end
-      foundation_space.setName(foundation_space_name)
-      if space_types_hash.keys.include? foundation_space_type_name
-        foundation_space_type = space_types_hash[foundation_space_type_name]
-      else
-        foundation_space_type = OpenStudio::Model::SpaceType.new(model)
-        foundation_space_type.setStandardsSpaceType(foundation_space_type_name)
-        space_types_hash[foundation_space_type_name] = foundation_space_type
-      end
-      foundation_space.setSpaceType(foundation_space_type)
-      runner.registerInfo("Set #{foundation_space_name}.")
-
-      # set these to the foundation zone
-      foundation_space.setThermalZone(foundation_zone)
-
-      # set foundation walls outside boundary condition
-      spaces = model.getSpaces
-      spaces.each do |space|
-        if WholeBuildingGeometry.get_space_floor_z(space) + WholeBuildingUnitConversions.convert(space.zOrigin, "m", "ft") < 0
-          surfaces = space.surfaces
-          surfaces.each do |surface|
-            next if surface.surfaceType.downcase != "wall"
-
-            surface.setOutsideBoundaryCondition("Ground")
-          end
-        end
-      end
-
-      m = WholeBuildingGeometry.initialize_transformation_matrix(OpenStudio::Matrix.new(4, 4, 0))
-      m[0, 3] = 0
-      m[1, 3] = 0
-      m[2, 3] = z
-      foundation_space.changeTransformation(OpenStudio::Transformation.new(m))
-
-    end
-
-    # put all of the spaces in the model into a vector
-    spaces = OpenStudio::Model::SpaceVector.new
-    model.getSpaces.each do |space|
-      spaces << space
-    end
-
-    # intersect and match surfaces for each space in the vector
-    OpenStudio::Model.intersectSurfaces(spaces)
-    OpenStudio::Model.matchSurfaces(spaces)
-
-    if has_garage and roof_type != WholeBuildingConstants.RoofTypeFlat
-      if num_floors > 1
-        space_with_roof_over_garage = living_space
-      else
-        space_with_roof_over_garage = garage_space
-      end
-      space_with_roof_over_garage.surfaces.each do |surface|
-        if surface.surfaceType.downcase == "roofceiling" and surface.outsideBoundaryCondition.downcase == "outdoors"
-          n_points = []
-          s_points = []
-          surface.vertices.each do |vertex|
-            if vertex.y == 0
-              n_points << vertex
-            elsif vertex.y < 0
-              s_points << vertex
-            end
-          end
-          if n_points[0].x > n_points[1].x
-            nw_point = n_points[1]
-            ne_point = n_points[0]
-          else
-            nw_point = n_points[0]
-            ne_point = n_points[1]
-          end
-          if s_points[0].x > s_points[1].x
-            sw_point = s_points[1]
-            se_point = s_points[0]
-          else
-            sw_point = s_points[0]
-            se_point = s_points[1]
-          end
-
-          if num_floors == 1
-            if not attic_type == "finished attic"
-              nw_point = OpenStudio::Point3d.new(nw_point.x, nw_point.y, living_space.zOrigin + nw_point.z)
-              ne_point = OpenStudio::Point3d.new(ne_point.x, ne_point.y, living_space.zOrigin + ne_point.z)
-              sw_point = OpenStudio::Point3d.new(sw_point.x, sw_point.y, living_space.zOrigin + sw_point.z)
-              se_point = OpenStudio::Point3d.new(se_point.x, se_point.y, living_space.zOrigin + se_point.z)
-            else
-              nw_point = OpenStudio::Point3d.new(nw_point.x, nw_point.y, nw_point.z - living_space.zOrigin)
-              ne_point = OpenStudio::Point3d.new(ne_point.x, ne_point.y, ne_point.z - living_space.zOrigin)
-              sw_point = OpenStudio::Point3d.new(sw_point.x, sw_point.y, sw_point.z - living_space.zOrigin)
-              se_point = OpenStudio::Point3d.new(se_point.x, se_point.y, se_point.z - living_space.zOrigin)
-            end
-          else
-            nw_point = OpenStudio::Point3d.new(nw_point.x, nw_point.y, num_floors * nw_point.z)
-            ne_point = OpenStudio::Point3d.new(ne_point.x, ne_point.y, num_floors * ne_point.z)
-            sw_point = OpenStudio::Point3d.new(sw_point.x, sw_point.y, num_floors * sw_point.z)
-            se_point = OpenStudio::Point3d.new(se_point.x, se_point.y, num_floors * se_point.z)
-          end
-
-          garage_attic_height = (ne_point.x - nw_point.x) / 2 * roof_pitch
-
-          garage_roof_pitch = roof_pitch
-          if garage_attic_height >= attic_height
-            garage_attic_height = attic_height - 0.01 # garage attic height slightly below attic height so that we don't get any roof decks with only three vertices
-            garage_roof_pitch = garage_attic_height / (garage_width / 2)
-            runner.registerWarning("The garage pitch was changed to accommodate garage ridge >= house ridge (from #{roof_pitch.round(3)} to #{garage_roof_pitch.round(3)}).")
-          end
-
-          if num_floors == 1
-            if not attic_type == "finished attic"
-              roof_n_point = OpenStudio::Point3d.new((nw_point.x + ne_point.x) / 2, nw_point.y + garage_attic_height / roof_pitch, living_space.zOrigin + wall_height + garage_attic_height)
-              roof_s_point = OpenStudio::Point3d.new((sw_point.x + se_point.x) / 2, sw_point.y, living_space.zOrigin + wall_height + garage_attic_height)
-            else
-              roof_n_point = OpenStudio::Point3d.new((nw_point.x + ne_point.x) / 2, nw_point.y + garage_attic_height / roof_pitch, garage_attic_height + wall_height)
-              roof_s_point = OpenStudio::Point3d.new((sw_point.x + se_point.x) / 2, sw_point.y, garage_attic_height + wall_height)
-            end
-          else
-            roof_n_point = OpenStudio::Point3d.new((nw_point.x + ne_point.x) / 2, nw_point.y + garage_attic_height / roof_pitch, num_floors * wall_height + garage_attic_height)
-            roof_s_point = OpenStudio::Point3d.new((sw_point.x + se_point.x) / 2, sw_point.y, num_floors * wall_height + garage_attic_height)
-          end
-
-          polygon_w_roof = WholeBuildingGeometry.make_polygon(nw_point, sw_point, roof_s_point, roof_n_point)
-          polygon_e_roof = WholeBuildingGeometry.make_polygon(ne_point, roof_n_point, roof_s_point, se_point)
-          polygon_n_wall = WholeBuildingGeometry.make_polygon(nw_point, roof_n_point, ne_point)
-          polygon_s_wall = WholeBuildingGeometry.make_polygon(sw_point, se_point, roof_s_point)
-
-          deck_w = OpenStudio::Model::Surface.new(polygon_w_roof, model)
-          deck_w.setSurfaceType("RoofCeiling")
-          deck_w.setOutsideBoundaryCondition("Outdoors")
-          deck_e = OpenStudio::Model::Surface.new(polygon_e_roof, model)
-          deck_e.setSurfaceType("RoofCeiling")
-          deck_e.setOutsideBoundaryCondition("Outdoors")
-          wall_n = OpenStudio::Model::Surface.new(polygon_n_wall, model)
-          wall_n.setSurfaceType("Wall")
-          wall_s = OpenStudio::Model::Surface.new(polygon_s_wall, model)
-          wall_s.setSurfaceType("Wall")
-          wall_s.setOutsideBoundaryCondition("Outdoors")
-
-          garage_attic_space = OpenStudio::Model::Space.new(model)
-          garage_attic_space_name = "garage attic space"
-          garage_attic_space.setName(garage_attic_space_name)
-          deck_w.setSpace(garage_attic_space)
-          deck_e.setSpace(garage_attic_space)
-          wall_n.setSpace(garage_attic_space)
-          wall_s.setSpace(garage_attic_space)
-
-          if attic_type == "finished attic"
-            garage_attic_space_type_name = WholeBuildingConstants.SpaceTypeLiving
-            garage_attic_space.setThermalZone(living_zone)
-          else
-            if num_floors > 1
-              garage_attic_space_type_name = WholeBuildingConstants.SpaceTypeUnfinishedAttic
-              garage_attic_space.setThermalZone(attic_zone)
-            else
-              garage_attic_space_type_name = WholeBuildingConstants.SpaceTypeGarageAttic
-              garage_attic_space.setThermalZone(garage_zone)
-            end
-          end
-
-          surface.createAdjacentSurface(garage_attic_space) # garage attic floor
-          if space_types_hash.keys.include? garage_attic_space_type_name
-            garage_attic_space_type = space_types_hash[garage_attic_space_type_name]
-          else
-            garage_attic_space_type = OpenStudio::Model::SpaceType.new(model)
-            garage_attic_space_type.setStandardsSpaceType(garage_attic_space_type_name)
-            space_types_hash[garage_attic_space_type_name] = garage_attic_space_type
-          end
-          garage_attic_space.setSpaceType(garage_attic_space_type)
-          runner.registerInfo("Set #{garage_attic_space_name}.")
-
-          # put all of the spaces in the model into a vector
-          spaces = OpenStudio::Model::SpaceVector.new
-          model.getSpaces.each do |space|
-            spaces << space
-          end
-
-          # intersect and match surfaces for each space in the vector
-          OpenStudio::Model.intersectSurfaces(spaces)
-          OpenStudio::Model.matchSurfaces(spaces)
-
-          # remove triangular surface between unfinished attic and garage attic
-          unless attic_space.nil?
-            attic_space.surfaces.each do |surface|
-              next if roof_type == WholeBuildingConstants.RoofTypeHip
-              next unless surface.vertices.length == 3
-              next unless (90 - surface.tilt * 180 / Math::PI).abs > 0.01 # don't remove the vertical attic walls
-              next unless surface.adjacentSurface.is_initialized
-
-              surface.adjacentSurface.get.remove
-              surface.remove
-            end
-          end
-
-          garage_attic_space.surfaces.each do |surface|
-            if num_floors > 1 or attic_type == "finished attic"
-              m = WholeBuildingGeometry.initialize_transformation_matrix(OpenStudio::Matrix.new(4, 4, 0))
-              m[2, 3] = -attic_space.zOrigin
-              transformation = OpenStudio::Transformation.new(m)
-              new_vertices = transformation * surface.vertices
-              surface.setVertices(new_vertices)
-              surface.setSpace(attic_space)
-            end
-          end
-
-          if num_floors > 1 or attic_type == "finished attic"
-            garage_attic_space.remove
-          end
-
-          break
-
-        end
-      end
-    end
-
-    # set foundation outside boundary condition to Kiva "foundation"
-    model.getSurfaces.each do |surface|
-      next if surface.outsideBoundaryCondition.downcase != "ground"
-
-      surface.setOutsideBoundaryCondition("Foundation")
-    end
-
-    # set foundation walls adjacent to garage to adiabatic
-    foundation_walls = []
-    model.getSurfaces.each do |surface|
-      next if surface.surfaceType.downcase != "wall"
-      next if surface.outsideBoundaryCondition.downcase != "foundation"
-
-      foundation_walls << surface
-    end
-    garage_spaces = WholeBuildingGeometry.get_garage_spaces(model.getSpaces)
-    garage_spaces.each do |garage_space|
-      garage_space.surfaces.each do |surface|
-        next if surface.surfaceType.downcase != "floor"
-
-        adjacent_wall_surfaces = WholeBuildingGeometry.get_walls_connected_to_floor(foundation_walls, surface, false)
-        adjacent_wall_surfaces.each do |adjacent_wall_surface|
-          adjacent_wall_surface.setOutsideBoundaryCondition("Adiabatic")
-        end
-      end
-    end
-
-    # Store building unit information
-    unit = OpenStudio::Model::BuildingUnit.new(model)
-    unit.setBuildingUnitType(WholeBuildingConstants.BuildingUnitTypeResidential)
-    unit.setName(WholeBuildingConstants.ObjectNameBuildingUnit)
-    model.getSpaces.each do |space|
-      next if not WholeBuildingGeometry.space_is_finished(space)
-
-      space.setBuildingUnit(unit)
-    end
-    model.getBuilding.additionalProperties.setFeature("Total Units Represented", 1)
-    model.getBuilding.additionalProperties.setFeature("Total Units Modeled", 1)
-
-    # Store number of units
-    model.getBuilding.setStandardsNumberOfLivingUnits(1)
-
-    # Store number of stories
-    if attic_type == "finished attic"
-      num_floors += 1
-    end
-    model.getBuilding.setStandardsNumberOfAboveGroundStories(num_floors)
-    if foundation_type == "finished basement"
-      num_floors += 1
-    end
-    model.getBuilding.setStandardsNumberOfStories(num_floors)
-
-    # Store the building type
-    model.getBuilding.setStandardsBuildingType(WholeBuildingConstants.BuildingTypeSingleFamilyDetached)
-
-    result = WholeBuildingGeometry.process_beds_and_baths(model, runner, num_br, num_ba)
-    unless result
-      return false
-    end
-
-    result = WholeBuildingGeometry.process_eaves(model, runner, eaves_depth, roof_structure)
-    unless result
-      return false
-    end
-
-    result = WholeBuildingGeometry.process_neighbors(model, runner, neighbor_left_offset, neighbor_right_offset, neighbor_back_offset, neighbor_front_offset)
-    unless result
-      return false
-    end
-
-    result = WholeBuildingGeometry.process_orientation(model, runner, orientation)
-    unless result
-      return false
-    end
-
-    # reporting final condition of model
-    runner.registerFinalCondition("The building finished with #{model.getSpaces.size} spaces.")
-
-    return true
-  end # end the run method
-end # end the measure
-
-# register the measure to be used by the application
-CreateResidentialSingleFamilyDetachedGeometry.new.registerWithApplication