unicorn-heroku-wait 4.8.0.1.g0ed2.dirty

data/bin/unicorn

@@ -0,0 +1,126 @@
+#!/this/will/be/overwritten/or/wrapped/anyways/do/not/worry/ruby
+# -*- encoding: binary -*-
+require 'unicorn/launcher'
+require 'optparse'
+
+ENV["RACK_ENV"] ||= "development"
+rackup_opts = Unicorn::Configurator::RACKUP
+options = rackup_opts[:options]
+
+op = OptionParser.new("", 24, '  ') do |opts|
+  cmd = File.basename($0)
+  opts.banner = "Usage: #{cmd} " \
+                "[ruby options] [#{cmd} options] [rackup config file]"
+  opts.separator "Ruby options:"
+
+  lineno = 1
+  opts.on("-e", "--eval LINE", "evaluate a LINE of code") do |line|
+    eval line, TOPLEVEL_BINDING, "-e", lineno
+    lineno += 1
+  end
+
+  opts.on("-d", "--debug", "set debugging flags (set $DEBUG to true)") do
+    $DEBUG = true
+  end
+
+  opts.on("-w", "--warn", "turn warnings on for your script") do
+    $-w = true
+  end
+
+  opts.on("-I", "--include PATH",
+          "specify $LOAD_PATH (may be used more than once)") do |path|
+    $LOAD_PATH.unshift(*path.split(/:/))
+  end
+
+  opts.on("-r", "--require LIBRARY",
+          "require the library, before executing your script") do |library|
+    require library
+  end
+
+  opts.separator "#{cmd} options:"
+
+  # some of these switches exist for rackup command-line compatibility,
+
+  opts.on("-o", "--host HOST",
+          "listen on HOST (default: #{Unicorn::Const::DEFAULT_HOST})") do |h|
+    rackup_opts[:host] = h
+    rackup_opts[:set_listener] = true
+  end
+
+  opts.on("-p", "--port PORT", Integer,
+          "use PORT (default: #{Unicorn::Const::DEFAULT_PORT})") do |port|
+    rackup_opts[:port] = port
+    rackup_opts[:set_listener] = true
+  end
+
+  opts.on("-E", "--env RACK_ENV",
+          "use RACK_ENV for defaults (default: development)") do |e|
+    ENV["RACK_ENV"] = e
+  end
+
+  opts.on("-N", "--no-default-middleware",
+          "do not load middleware implied by RACK_ENV") do |e|
+    rackup_opts[:no_default_middleware] = true
+  end
+
+  opts.on("-D", "--daemonize", "run daemonized in the background") do |d|
+    rackup_opts[:daemonize] = !!d
+  end
+
+  opts.on("-P", "--pid FILE", "DEPRECATED") do |f|
+    warn %q{Use of --pid/-P is strongly discouraged}
+    warn %q{Use the 'pid' directive in the Unicorn config file instead}
+    options[:pid] = f
+  end
+
+  opts.on("-s", "--server SERVER",
+          "this flag only exists for compatibility") do |s|
+    warn "-s/--server only exists for compatibility with rackup"
+  end
+
+  # Unicorn-specific stuff
+  opts.on("-l", "--listen {HOST:PORT|PATH}",
+          "listen on HOST:PORT or PATH",
+          "this may be specified multiple times",
+          "(default: #{Unicorn::Const::DEFAULT_LISTEN})") do |address|
+    options[:listeners] << address
+  end
+
+  opts.on("-c", "--config-file FILE", "Unicorn-specific config file") do |f|
+    options[:config_file] = f
+  end
+
+  # I'm avoiding Unicorn-specific config options on the command-line.
+  # IMNSHO, config options on the command-line are redundant given
+  # config files and make things unnecessarily complicated with multiple
+  # places to look for a config option.
+
+  opts.separator "Common options:"
+
+  opts.on_tail("-h", "--help", "Show this message") do
+    puts opts.to_s.gsub(/^.*DEPRECATED.*$/s, '')
+    exit
+  end
+
+  opts.on_tail("-v", "--version", "Show version") do
+    puts "#{cmd} v#{Unicorn::Const::UNICORN_VERSION}"
+    exit
+  end
+
+  opts.parse! ARGV
+end
+
+app = Unicorn.builder(ARGV[0] || 'config.ru', op)
+op = nil
+
+if $DEBUG
+  require 'pp'
+  pp({
+    :unicorn_options => options,
+    :app => app,
+    :daemonize => rackup_opts[:daemonize],
+  })
+end
+
+Unicorn::Launcher.daemonize!(options) if rackup_opts[:daemonize]
+Unicorn::HttpServer.new(app, options).start.join

data/bin/unicorn_rails

@@ -0,0 +1,209 @@
+#!/this/will/be/overwritten/or/wrapped/anyways/do/not/worry/ruby
+# -*- encoding: binary -*-
+require 'unicorn/launcher'
+require 'optparse'
+require 'fileutils'
+
+ENV['RAILS_ENV'] ||= "development"
+rackup_opts = Unicorn::Configurator::RACKUP
+options = rackup_opts[:options]
+
+op = OptionParser.new("", 24, '  ') do |opts|
+  cmd = File.basename($0)
+  opts.banner = "Usage: #{cmd} " \
+                "[ruby options] [#{cmd} options] [rackup config file]"
+  opts.separator "Ruby options:"
+
+  lineno = 1
+  opts.on("-e", "--eval LINE", "evaluate a LINE of code") do |line|
+    eval line, TOPLEVEL_BINDING, "-e", lineno
+    lineno += 1
+  end
+
+  opts.on("-d", "--debug", "set debugging flags (set $DEBUG to true)") do
+    $DEBUG = true
+  end
+
+  opts.on("-w", "--warn", "turn warnings on for your script") do
+    $-w = true
+  end
+
+  opts.on("-I", "--include PATH",
+          "specify $LOAD_PATH (may be used more than once)") do |path|
+    $LOAD_PATH.unshift(*path.split(/:/))
+  end
+
+  opts.on("-r", "--require LIBRARY",
+          "require the library, before executing your script") do |library|
+    require library
+  end
+
+  opts.separator "#{cmd} options:"
+
+  # some of these switches exist for rackup command-line compatibility,
+
+  opts.on("-o", "--host HOST",
+          "listen on HOST (default: #{Unicorn::Const::DEFAULT_HOST})") do |h|
+    rackup_opts[:host] = h
+    rackup_opts[:set_listener] = true
+  end
+
+  opts.on("-p", "--port PORT", Integer,
+          "use PORT (default: #{Unicorn::Const::DEFAULT_PORT})") do |port|
+    rackup_opts[:port] = port
+    rackup_opts[:set_listener] = true
+  end
+
+  opts.on("-E", "--env RAILS_ENV",
+          "use RAILS_ENV for defaults (default: development)") do |e|
+    ENV['RAILS_ENV'] = e
+  end
+
+  opts.on("-D", "--daemonize", "run daemonized in the background") do |d|
+    rackup_opts[:daemonize] = !!d
+  end
+
+  # Unicorn-specific stuff
+  opts.on("-l", "--listen {HOST:PORT|PATH}",
+          "listen on HOST:PORT or PATH",
+          "this may be specified multiple times",
+          "(default: #{Unicorn::Const::DEFAULT_LISTEN})") do |address|
+    options[:listeners] << address
+  end
+
+  opts.on("-c", "--config-file FILE", "Unicorn-specific config file") do |f|
+    options[:config_file] = f
+  end
+
+  opts.on("-P PATH", "DEPRECATED") do |v|
+    warn %q{Use of -P is ambiguous and discouraged}
+    warn %q{Use --path or RAILS_RELATIVE_URL_ROOT instead}
+    ENV['RAILS_RELATIVE_URL_ROOT'] = v
+  end
+
+  opts.on("--path PATH", "Runs Rails app mounted at a specific path.",
+          "(default: /)") do |v|
+    ENV['RAILS_RELATIVE_URL_ROOT'] = v
+  end
+
+  # I'm avoiding Unicorn-specific config options on the command-line.
+  # IMNSHO, config options on the command-line are redundant given
+  # config files and make things unnecessarily complicated with multiple
+  # places to look for a config option.
+
+  opts.separator "Common options:"
+
+  opts.on_tail("-h", "--help", "Show this message") do
+    puts opts.to_s.gsub(/^.*DEPRECATED.*$/s, '')
+    exit
+  end
+
+  opts.on_tail("-v", "--version", "Show version") do
+    puts "#{cmd} v#{Unicorn::Const::UNICORN_VERSION}"
+    exit
+  end
+
+  opts.parse! ARGV
+end
+
+def rails_dispatcher
+  if ::Rails::VERSION::MAJOR >= 3 && ::File.exist?('config/application.rb')
+    if ::File.read('config/application.rb') =~ /^module\s+([\w:]+)\s*$/
+      app_module = Object.const_get($1)
+      begin
+        result = app_module::Application
+      rescue NameError
+      end
+    end
+  end
+
+  if result.nil? && defined?(ActionController::Dispatcher)
+    result = ActionController::Dispatcher.new
+  end
+
+  result || abort("Unable to locate the application dispatcher class")
+end
+
+def rails_builder(ru, op, daemonize)
+  return Unicorn.builder(ru, op) if ru
+
+  # allow Configurator to parse cli switches embedded in the ru file
+  Unicorn::Configurator::RACKUP.update(:file => :rails, :optparse => op)
+
+  # this lambda won't run until after forking if preload_app is false
+  # this runs after config file reloading
+  lambda do ||
+    # Rails 3 includes a config.ru, use it if we find it after
+    # working_directory is bound.
+    ::File.exist?('config.ru') and
+      return Unicorn.builder('config.ru', op).call
+
+    # Load Rails and (possibly) the private version of Rack it bundles.
+    begin
+      require ::File.expand_path('config/boot')
+      require ::File.expand_path('config/environment')
+    rescue LoadError => err
+      abort "#$0 must be run inside RAILS_ROOT: #{err.inspect}"
+    end
+
+    defined?(::Rails::VERSION::STRING) or
+      abort "Rails::VERSION::STRING not defined by config/{boot,environment}"
+    # it seems Rails >=2.2 support Rack, but only >=2.3 requires it
+    old_rails = case ::Rails::VERSION::MAJOR
+    when 0, 1 then true
+    when 2 then Rails::VERSION::MINOR < 3 ? true : false
+    else
+      false
+    end
+
+    Rack::Builder.new do
+      map_path = ENV['RAILS_RELATIVE_URL_ROOT'] || '/'
+      if old_rails
+        if map_path != '/'
+          # patches + tests welcome, but I really cbf to deal with this
+          # since all apps I've ever dealt with just use "/" ...
+          warn "relative URL roots may not work for older Rails"
+        end
+        warn "LogTailer not available for Rails < 2.3" unless daemonize
+        warn "Debugger not available" if $DEBUG
+        require 'unicorn/app/old_rails'
+        map(map_path) do
+          use Unicorn::App::OldRails::Static
+          run Unicorn::App::OldRails.new
+        end
+      else
+        use Rails::Rack::LogTailer unless daemonize
+        use Rails::Rack::Debugger if $DEBUG
+        map(map_path) do
+          unless defined?(ActionDispatch::Static)
+            use Rails::Rack::Static
+          end
+          run rails_dispatcher
+        end
+      end
+    end.to_app
+  end
+end
+
+app = rails_builder(ARGV[0], op, rackup_opts[:daemonize])
+op = nil
+
+if $DEBUG
+  require 'pp'
+  pp({
+    :unicorn_options => options,
+    :app => app,
+    :daemonize => rackup_opts[:daemonize],
+  })
+end
+
+# ensure Rails standard tmp paths exist
+options[:after_reload] = lambda do
+  FileUtils.mkdir_p(%w(cache pids sessions sockets).map! { |d| "tmp/#{d}" })
+end
+
+if rackup_opts[:daemonize]
+  options[:pid] = "tmp/pids/unicorn.pid"
+  Unicorn::Launcher.daemonize!(options)
+end
+Unicorn::HttpServer.new(app, options).start.join

data/examples/big_app_gc.rb

@@ -0,0 +1,2 @@
+# see {Unicorn::OobGC}[http://unicorn.bogomips.org/Unicorn/OobGC.html]
+# Unicorn::OobGC was broken in Unicorn v3.3.1 - v3.6.1 and fixed in v3.6.2

data/examples/echo.ru

@@ -0,0 +1,27 @@
+#\-E none
+#
+# Example application that echoes read data back to the HTTP client.
+# This emulates the old echo protocol people used to run.
+#
+# An example of using this in a client would be to run:
+#   curl --no-buffer -T- http://host:port/
+#
+# Then type random stuff in your terminal to watch it get echoed back!
+
+class EchoBody < Struct.new(:input)
+
+  def each(&block)
+    while buf = input.read(4096)
+      yield buf
+    end
+    self
+  end
+
+end
+
+use Rack::Chunked
+run lambda { |env|
+  /\A100-continue\z/i =~ env['HTTP_EXPECT'] and return [100, {}, []]
+  [ 200, { 'Content-Type' => 'application/octet-stream' },
+    EchoBody.new(env['rack.input']) ]
+}

data/examples/git.ru

@@ -0,0 +1,13 @@
+#\-E none
+
+# See http://thread.gmane.org/gmane.comp.web.curl.general/10473/raw on
+# how to setup git for this.  A better version of the above patch was
+# accepted and committed on June 15, 2009, so you can pull the latest
+# curl CVS snapshot to try this out.
+require 'unicorn/app/inetd'
+
+use Rack::Lint
+use Rack::Chunked # important!
+run Unicorn::App::Inetd.new(
+ *%w(git daemon --verbose --inetd --export-all --base-path=/home/ew/unicorn)
+)

data/examples/init.sh

@@ -0,0 +1,74 @@
+#!/bin/sh
+set -e
+# Example init script, this can be used with nginx, too,
+# since nginx and unicorn accept the same signals
+
+# Feel free to change any of the following variables for your app:
+TIMEOUT=${TIMEOUT-60}
+APP_ROOT=/home/x/my_app/current
+PID=$APP_ROOT/tmp/pids/unicorn.pid
+CMD="/usr/bin/unicorn -D -c $APP_ROOT/config/unicorn.rb"
+INIT_CONF=$APP_ROOT/config/init.conf
+action="$1"
+set -u
+
+test -f "$INIT_CONF" && . $INIT_CONF
+
+old_pid="$PID.oldbin"
+
+cd $APP_ROOT || exit 1
+
+sig () {
+	test -s "$PID" && kill -$1 `cat $PID`
+}
+
+oldsig () {
+	test -s $old_pid && kill -$1 `cat $old_pid`
+}
+
+case $action in
+start)
+	sig 0 && echo >&2 "Already running" && exit 0
+	$CMD
+	;;
+stop)
+	sig QUIT && exit 0
+	echo >&2 "Not running"
+	;;
+force-stop)
+	sig TERM && exit 0
+	echo >&2 "Not running"
+	;;
+restart|reload)
+	sig HUP && echo reloaded OK && exit 0
+	echo >&2 "Couldn't reload, starting '$CMD' instead"
+	$CMD
+	;;
+upgrade)
+	if sig USR2 && sleep 2 && sig 0 && oldsig QUIT
+	then
+		n=$TIMEOUT
+		while test -s $old_pid && test $n -ge 0
+		do
+			printf '.' && sleep 1 && n=$(( $n - 1 ))
+		done
+		echo
+
+		if test $n -lt 0 && test -s $old_pid
+		then
+			echo >&2 "$old_pid still exists after $TIMEOUT seconds"
+			exit 1
+		fi
+		exit 0
+	fi
+	echo >&2 "Couldn't upgrade, starting '$CMD' instead"
+	$CMD
+	;;
+reopen-logs)
+	sig USR1
+	;;
+*)
+	echo >&2 "Usage: $0 <start|stop|restart|upgrade|force-stop|reopen-logs>"
+	exit 1
+	;;
+esac

data/examples/logger_mp_safe.rb

@@ -0,0 +1,25 @@
+# Multi-Processing-safe monkey patch for Logger
+#
+# This monkey patch fixes the case where "preload_app true" is used and
+# the application spawns a background thread upon being loaded.
+#
+# This removes all lock from the Logger code and solely relies on the
+# underlying filesystem to handle write(2) system calls atomically when
+# O_APPEND is used.  This is safe in the presence of both multiple
+# threads (native or green) and multiple processes when writing to
+# a filesystem with POSIX O_APPEND semantics.
+#
+# It should be noted that the original locking on Logger could _never_ be
+# considered reliable on non-POSIX filesystems with multiple processes,
+# either, so nothing is lost in that case.
+
+require 'logger'
+class Logger::LogDevice
+  def write(message)
+    @dev.syswrite(message)
+  end
+
+  def close
+    @dev.close
+  end
+end

data/examples/logrotate.conf

@@ -0,0 +1,29 @@
+# example logrotate config file, I usually keep this in
+# /etc/logrotate.d/unicorn_app on my Debian systems
+#
+# See the logrotate(8) manpage for more information:
+#    http://linux.die.net/man/8/logrotate
+
+# Modify the following glob to match the logfiles your app writes to:
+/var/log/unicorn_app/*.log {
+	# this first block is mostly just personal preference, though
+	# I wish logrotate offered an "hourly" option...
+	daily
+	missingok
+	rotate 180
+	compress # must use with delaycompress below
+	dateext
+
+	# this is important if using "compress" since we need to call
+	# the "lastaction" script below before compressing:
+	delaycompress
+
+	# note the lack of the evil "copytruncate" option in this
+	# config.  Unicorn supports the USR1 signal and we send it
+	# as our "lastaction" action:
+	lastaction
+		# assuming your pid file is in /var/run/unicorn_app/pid
+		pid=/var/run/unicorn_app/pid
+		test -s $pid && kill -USR1 "$(cat $pid)"
+	endscript
+}

data/examples/nginx.conf

@@ -0,0 +1,156 @@
+# This is example contains the bare mininum to get nginx going with
+# Unicorn or Rainbows! servers.  Generally these configuration settings
+# are applicable to other HTTP application servers (and not just Ruby
+# ones), so if you have one working well for proxying another app
+# server, feel free to continue using it.
+#
+# The only setting we feel strongly about is the fail_timeout=0
+# directive in the "upstream" block.  max_fails=0 also has the same
+# effect as fail_timeout=0 for current versions of nginx and may be
+# used in its place.
+#
+# Users are strongly encouraged to refer to nginx documentation for more
+# details and search for other example configs.
+
+# you generally only need one nginx worker unless you're serving
+# large amounts of static files which require blocking disk reads
+worker_processes 1;
+
+# # drop privileges, root is needed on most systems for binding to port 80
+# # (or anything < 1024).  Capability-based security may be available for
+# # your system and worth checking out so you won't need to be root to
+# # start nginx to bind on 80
+user nobody nogroup; # for systems with a "nogroup"
+# user nobody nobody; # for systems with "nobody" as a group instead
+
+# Feel free to change all paths to suite your needs here, of course
+pid /path/to/nginx.pid;
+error_log /path/to/nginx.error.log;
+
+events {
+  worker_connections 1024; # increase if you have lots of clients
+  accept_mutex off; # "on" if nginx worker_processes > 1
+  # use epoll; # enable for Linux 2.6+
+  # use kqueue; # enable for FreeBSD, OSX
+}
+
+http {
+  # nginx will find this file in the config directory set at nginx build time
+  include mime.types;
+
+  # fallback in case we can't determine a type
+  default_type application/octet-stream;
+
+  # click tracking!
+  access_log /path/to/nginx.access.log combined;
+
+  # you generally want to serve static files with nginx since neither
+  # Unicorn nor Rainbows! is optimized for it at the moment
+  sendfile on;
+
+  tcp_nopush on; # off may be better for *some* Comet/long-poll stuff
+  tcp_nodelay off; # on may be better for some Comet/long-poll stuff
+
+  # we haven't checked to see if Rack::Deflate on the app server is
+  # faster or not than doing compression via nginx.  It's easier
+  # to configure it all in one place here for static files and also
+  # to disable gzip for clients who don't get gzip/deflate right.
+  # There are other gzip settings that may be needed used to deal with
+  # bad clients out there, see http://wiki.nginx.org/NginxHttpGzipModule
+  gzip on;
+  gzip_http_version 1.0;
+  gzip_proxied any;
+  gzip_min_length 500;
+  gzip_disable "MSIE [1-6]\.";
+  gzip_types text/plain text/html text/xml text/css
+             text/comma-separated-values
+             text/javascript application/x-javascript
+             application/atom+xml;
+
+  # this can be any application server, not just Unicorn/Rainbows!
+  upstream app_server {
+    # fail_timeout=0 means we always retry an upstream even if it failed
+    # to return a good HTTP response (in case the Unicorn master nukes a
+    # single worker for timing out).
+
+    # for UNIX domain socket setups:
+    server unix:/path/to/.unicorn.sock fail_timeout=0;
+
+    # for TCP setups, point these to your backend servers
+    # server 192.168.0.7:8080 fail_timeout=0;
+    # server 192.168.0.8:8080 fail_timeout=0;
+    # server 192.168.0.9:8080 fail_timeout=0;
+  }
+
+  server {
+    # enable one of the following if you're on Linux or FreeBSD
+    # listen 80 default deferred; # for Linux
+    # listen 80 default accept_filter=httpready; # for FreeBSD
+
+    # If you have IPv6, you'll likely want to have two separate listeners.
+    # One on IPv4 only (the default), and another on IPv6 only instead
+    # of a single dual-stack listener.  A dual-stack listener will make
+    # for ugly IPv4 addresses in $remote_addr (e.g ":ffff:10.0.0.1"
+    # instead of just "10.0.0.1") and potentially trigger bugs in
+    # some software.
+    # listen [::]:80 ipv6only=on; # deferred or accept_filter recommended
+
+    client_max_body_size 4G;
+    server_name _;
+
+    # ~2 seconds is often enough for most folks to parse HTML/CSS and
+    # retrieve needed images/icons/frames, connections are cheap in
+    # nginx so increasing this is generally safe...
+    keepalive_timeout 5;
+
+    # path for static files
+    root /path/to/app/current/public;
+
+    # Prefer to serve static files directly from nginx to avoid unnecessary
+    # data copies from the application server.
+    #
+    # try_files directive appeared in in nginx 0.7.27 and has stabilized
+    # over time.  Older versions of nginx (e.g. 0.6.x) requires
+    # "if (!-f $request_filename)" which was less efficient:
+    # http://bogomips.org/unicorn.git/tree/examples/nginx.conf?id=v3.3.1#n127
+    try_files $uri/index.html $uri.html $uri @app;
+
+    location @app {
+      # an HTTP header important enough to have its own Wikipedia entry:
+      #   http://en.wikipedia.org/wiki/X-Forwarded-For
+      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+
+      # enable this if you forward HTTPS traffic to unicorn,
+      # this helps Rack set the proper URL scheme for doing redirects:
+      # proxy_set_header X-Forwarded-Proto $scheme;
+
+      # pass the Host: header from the client right along so redirects
+      # can be set properly within the Rack application
+      proxy_set_header Host $http_host;
+
+      # we don't want nginx trying to do something clever with
+      # redirects, we set the Host: header above already.
+      proxy_redirect off;
+
+      # set "proxy_buffering off" *only* for Rainbows! when doing
+      # Comet/long-poll/streaming.  It's also safe to set if you're using
+      # only serving fast clients with Unicorn + nginx, but not slow
+      # clients.  You normally want nginx to buffer responses to slow
+      # clients, even with Rails 3.1 streaming because otherwise a slow
+      # client can become a bottleneck of Unicorn.
+      #
+      # The Rack application may also set "X-Accel-Buffering (yes|no)"
+      # in the response headers do disable/enable buffering on a
+      # per-response basis.
+      # proxy_buffering off;
+
+      proxy_pass http://app_server;
+    }
+
+    # Rails error pages
+    error_page 500 502 503 504 /500.html;
+    location = /500.html {
+      root /path/to/app/current/public;
+    }
+  }
+}

data/examples/unicorn.conf.minimal.rb

@@ -0,0 +1,13 @@
+# Minimal sample configuration file for Unicorn (not Rack) when used
+# with daemonization (unicorn -D) started in your working directory.
+#
+# See http://unicorn.bogomips.org/Unicorn/Configurator.html for complete
+# documentation.
+# See also http://unicorn.bogomips.org/examples/unicorn.conf.rb for
+# a more verbose configuration using more features.
+
+listen 2007 # by default Unicorn listens on port 8080
+worker_processes 2 # this should be >= nr_cpus
+pid "/path/to/app/shared/pids/unicorn.pid"
+stderr_path "/path/to/app/shared/log/unicorn.log"
+stdout_path "/path/to/app/shared/log/unicorn.log"