trackler 2.2.1.33 → 2.2.1.34

data/tracks/coldfusion/exercises/rna-transcription/SolutionTest.cfc

@@ -0,0 +1,7 @@
+component extends="RnaTranscriptionTest" {
+
+	function beforeAll(){
+	  SUT = createObject( 'Solution' );
+	}
+
+}

data/tracks/coldfusion/exercises/rna-transcription/TestRunner.cfc

@@ -0,0 +1,103 @@
+/**
+* I am a CommandBox task runner which you can use to test your implementation of this exercise against the 
+* provided test suite.  To use me, open the CommandBox CLI and run this:
+* 
+* CommandBox> task run TestRunner
+*
+* To start up a test watcher that will automatically rerun the test suite every time you save a file change, run this:
+*
+* CommandBox> task run TestRunner --watcher
+*
+*/
+component {
+	
+	/**
+	* @solution Runs the tests against the solution
+	* @watcher Start up a file watch that re-runs the tests on file changes. Use Ctrl-C to stop
+	*/
+	function run( boolean solution=false, boolean watcher=false ) {
+		
+		ensureTestBox();
+
+		if( watcher ) {
+		
+			// Tabula rasa
+			command( 'cls' ).run();
+				
+			// Start watcher
+			watch()
+				.paths( '*.cfc' )
+				.inDirectory( getCWD() )
+				.withDelay( 500 )
+				.onChange( function() {
+	
+					// Clear the screen
+					command( 'cls' )
+						.run();
+
+					// This is neccessary so changes to tests get picked up right away.
+					pagePoolClear();	
+					
+					runTests( solution );
+	
+				} )
+				.start();
+					
+		} else {
+			runTests( solution );
+		}			
+
+	}
+
+	/**
+	* Make sure the TestBox framework is installed
+	*/
+	private function ensureTestBox() {
+		var excerciseRoot = getCWD();
+		var testBoxRoot = excerciseRoot & '/testbox';
+		
+		if( !directoryExists( testBoxRoot ) ) {
+			
+			print.boldYellowLine( 'Installing some missing dependencies for you!' ).toConsole();
+			command( 'install' )
+				.inWorkingDirectory( excerciseRoot )
+				.run();
+		}
+		
+		// Bootstrap TestBox framework
+		filesystemUtil.createMapping( '/testbox', testBoxRoot );
+	}
+
+	/**
+	* Invoke TestBox to run the test suite
+	*/
+	private function runTests( boolean solution=false ) {
+		
+		// Create TestBox and run the tests
+		testData = new testbox.system.TestBox()
+			.runRaw( directory = {
+				// Find all CFCs...
+				mapping = filesystemUtil.makePathRelative( getCWD() ),
+				// ... in this directory ...
+				recurse = false,
+				// ... whose name ends in "test"
+				filter = function( path ) {
+					return path.reFind( ( solution ? 'Solution' : '' ) & 'Test.cfc$' );
+				 }
+			} )
+			.getMemento();
+		
+		// Print out the results with ANSI formatting for the CLI
+		getInstance( 'CLIRenderer@testbox-commands' )
+			.render( print, testData, true );
+			
+		print.toConsole();
+		
+		// Set proper exit code
+		if( testData.totalFail || testData.totalError ) {
+			setExitCode( 1 );
+		}
+	}
+
+}
+

data/tracks/coldfusion/exercises/rna-transcription/box.json

@@ -0,0 +1,8 @@
+{
+    "dependencies":{
+        "testbox":"^2.5.0+107"
+    },
+    "installPaths":{
+        "testbox":"testbox"
+    }
+}

data/tracks/coldfusion/exercises/rna-transcription/index.cfm

@@ -0,0 +1,37 @@
+<!--- 
+
+This file will only be used if you want to start up a web server in this directory.  You can do so by running:
+
+$> box
+CommandBox> install
+CommandBox> server start
+
+However, this is not necessary unless you really just want to use the HTML reporters on TestBox.  
+Ideally, you'll skip the need for this file entirely and just run the tests directly frm the CLI like this:
+
+CommandBox> task run TestRunner
+
+ --->
+<cfsetting showDebugOutput="false">
+<cfparam name="url.reporter" 		default="simple">
+<cfscript>
+	// get a list of all CFCs in this folder whose name looks like "XXXTest.cfc"
+	// And turn it into compnent path relative to the web root
+	url.bundles = directoryList(
+			path=expandPath( '/' ),
+			filter='*Test.cfc' )
+		.map( function( path ) {
+			return path
+					.replaceNoCase( expandPath( '/' ), '' )
+					.left( -4 )
+		} )
+		.toList();
+</cfscript>
+
+<!--- Ensure TestBox --->
+<cfif fileExists( "/testbox/system/runners/HTMLRunner.cfm" )>
+	<!--- Include the TestBox HTML Runner --->
+	<cfinclude template="/testbox/system/runners/HTMLRunner.cfm">
+<cfelse>
+	Oops, you don't have TestBox installed yet! Please run <b>box install</b> from the root of your excercise folder and refresh this page.	
+</cfif>

data/tracks/coldfusion/exercises/saddle-points/SaddlePoints.cfc

@@ -0,0 +1,13 @@
+/**
+* Your implmentation of the SaddlePoints exercise
+*/
+component {
+	
+	/**
+	* @returns 
+	*/
+	function saddlePoints( input ) {
+		// Implement me here
+	}
+	
+}

data/tracks/coldfusion/exercises/saddle-points/SaddlePointsTest.cfc

@@ -0,0 +1,35 @@
+component extends="testbox.system.BaseSpec" {
+
+	function beforeAll(){
+	  SUT = createObject( 'SaddlePoints' );
+	}
+
+	function run(){
+	
+		describe( "My SaddlePoints class", function(){			
+
+			it( 'Can identify single saddle point', function(){
+				expect( SUT.saddlePoints( input=[[9, 8, 7], [5, 3, 2], [6, 6, 7]] ) ).toBe( [{"row":1,"column":0}] );
+			});
+
+			it( 'Can identify that empty matrix has no saddle points', function(){
+				expect( SUT.saddlePoints( input=[[]] ) ).toBe( [] );
+			});
+
+			it( 'Can identify lack of saddle points when there are none', function(){
+				expect( SUT.saddlePoints( input=[[1, 2, 3], [3, 1, 2], [2, 3, 1]] ) ).toBe( [] );
+			});
+
+			it( 'Can identify multiple saddle points', function(){
+				expect( SUT.saddlePoints( input=[[4, 5, 4], [3, 5, 5], [1, 5, 4]] ) ).toBe( [{"row":0,"column":1},{"row":1,"column":1},{"row":2,"column":1}] );
+			});
+
+			it( 'Can identify saddle point in bottom right corner', function(){
+				expect( SUT.saddlePoints( input=[[8, 7, 9], [6, 7, 6], [3, 2, 5]] ) ).toBe( [{"row":2,"column":2}] );
+			});
+
+		});
+		
+	}
+ 
+}

data/tracks/coldfusion/exercises/saddle-points/Solution.cfc

@@ -0,0 +1,59 @@
+/**
+* Here is an example solution for the SaddlePoints exercise
+*/
+component {
+
+	function saddlePoints( input ) {
+		if( input.isEmpty() || input[ 1 ].isEmpty() ) {
+			return [];
+		}
+		
+		var result = [];
+		// Loop over each column
+		for( var col=1; col<=3; col++ ) {
+			
+			// Loop over each row
+			for( var row=1; row<=3; row++ ) {
+				
+				// This value must be the biggest int he row
+				if( getAt( input, row, col ) >= rowMax( input, row )
+					// and the least in the column
+					&& getAt( input, row, col ) <= colMin( input, col ) ){
+					
+					// Silly exercise uses inferior 0-based numbering!
+					result.append( {
+						row : row-1,
+						column : col-1
+					} );
+					
+				} // End check
+				
+			} // end row loop
+			
+		} // end col loop
+		
+		return result;
+	}
+	
+	/**
+	* Get minimum value for a column
+	*/
+	private function colMin( input, col ) {
+		return [ input[ 1 ][ col ], input[ 2 ][ col ], input[ 3 ][ col ] ].min();
+	}	
+	
+	/**
+	* Get maximum value for a row
+	*/
+	private function rowMax( input, row ) {
+		return input[ row ].max();
+	}	
+	
+	/**
+	* Get a specific value from the matrix
+	*/
+	private function getAt( input, row, col ) {
+		return input[ row ][ col ];
+	}
+		
+}

data/tracks/coldfusion/exercises/saddle-points/SolutionTest.cfc

@@ -0,0 +1,7 @@
+component extends="SaddlePointsTest" {
+
+	function beforeAll(){
+	  SUT = createObject( 'Solution' );
+	}
+
+}

data/tracks/coldfusion/exercises/saddle-points/TestRunner.cfc

@@ -0,0 +1,103 @@
+/**
+* I am a CommandBox task runner which you can use to test your implementation of this exercise against the 
+* provided test suite.  To use me, open the CommandBox CLI and run this:
+* 
+* CommandBox> task run TestRunner
+*
+* To start up a test watcher that will automatically rerun the test suite every time you save a file change, run this:
+*
+* CommandBox> task run TestRunner --watcher
+*
+*/
+component {
+	
+	/**
+	* @solution Runs the tests against the solution
+	* @watcher Start up a file watch that re-runs the tests on file changes. Use Ctrl-C to stop
+	*/
+	function run( boolean solution=false, boolean watcher=false ) {
+		
+		ensureTestBox();
+
+		if( watcher ) {
+		
+			// Tabula rasa
+			command( 'cls' ).run();
+				
+			// Start watcher
+			watch()
+				.paths( '*.cfc' )
+				.inDirectory( getCWD() )
+				.withDelay( 500 )
+				.onChange( function() {
+	
+					// Clear the screen
+					command( 'cls' )
+						.run();
+
+					// This is neccessary so changes to tests get picked up right away.
+					pagePoolClear();	
+					
+					runTests( solution );
+	
+				} )
+				.start();
+					
+		} else {
+			runTests( solution );
+		}			
+
+	}
+
+	/**
+	* Make sure the TestBox framework is installed
+	*/
+	private function ensureTestBox() {
+		var excerciseRoot = getCWD();
+		var testBoxRoot = excerciseRoot & '/testbox';
+		
+		if( !directoryExists( testBoxRoot ) ) {
+			
+			print.boldYellowLine( 'Installing some missing dependencies for you!' ).toConsole();
+			command( 'install' )
+				.inWorkingDirectory( excerciseRoot )
+				.run();
+		}
+		
+		// Bootstrap TestBox framework
+		filesystemUtil.createMapping( '/testbox', testBoxRoot );
+	}
+
+	/**
+	* Invoke TestBox to run the test suite
+	*/
+	private function runTests( boolean solution=false ) {
+		
+		// Create TestBox and run the tests
+		testData = new testbox.system.TestBox()
+			.runRaw( directory = {
+				// Find all CFCs...
+				mapping = filesystemUtil.makePathRelative( getCWD() ),
+				// ... in this directory ...
+				recurse = false,
+				// ... whose name ends in "test"
+				filter = function( path ) {
+					return path.reFind( ( solution ? 'Solution' : '' ) & 'Test.cfc$' );
+				 }
+			} )
+			.getMemento();
+		
+		// Print out the results with ANSI formatting for the CLI
+		getInstance( 'CLIRenderer@testbox-commands' )
+			.render( print, testData, true );
+			
+		print.toConsole();
+		
+		// Set proper exit code
+		if( testData.totalFail || testData.totalError ) {
+			setExitCode( 1 );
+		}
+	}
+
+}
+

data/tracks/coldfusion/exercises/saddle-points/box.json

@@ -0,0 +1,8 @@
+{
+    "dependencies":{
+        "testbox":"^2.5.0+107"
+    },
+    "installPaths":{
+        "testbox":"testbox"
+    }
+}

data/tracks/coldfusion/exercises/saddle-points/index.cfm

@@ -0,0 +1,37 @@
+<!--- 
+
+This file will only be used if you want to start up a web server in this directory.  You can do so by running:
+
+$> box
+CommandBox> install
+CommandBox> server start
+
+However, this is not necessary unless you really just want to use the HTML reporters on TestBox.  
+Ideally, you'll skip the need for this file entirely and just run the tests directly frm the CLI like this:
+
+CommandBox> task run TestRunner
+
+ --->
+<cfsetting showDebugOutput="false">
+<cfparam name="url.reporter" 		default="simple">
+<cfscript>
+	// get a list of all CFCs in this folder whose name looks like "XXXTest.cfc"
+	// And turn it into compnent path relative to the web root
+	url.bundles = directoryList(
+			path=expandPath( '/' ),
+			filter='*Test.cfc' )
+		.map( function( path ) {
+			return path
+					.replaceNoCase( expandPath( '/' ), '' )
+					.left( -4 )
+		} )
+		.toList();
+</cfscript>
+
+<!--- Ensure TestBox --->
+<cfif fileExists( "/testbox/system/runners/HTMLRunner.cfm" )>
+	<!--- Include the TestBox HTML Runner --->
+	<cfinclude template="/testbox/system/runners/HTMLRunner.cfm">
+<cfelse>
+	Oops, you don't have TestBox installed yet! Please run <b>box install</b> from the root of your excercise folder and refresh this page.	
+</cfif>

data/tracks/coldfusion/exercises/scrabble-score/ScrabbleScore.cfc

@@ -0,0 +1,13 @@
+/**
+* Your implmentation of the ScrabbleScore exercise
+*/
+component {
+	
+	/**
+	* @returns 
+	*/
+	 function score( input ) {
+		// Implement me here
+	}
+	
+}