therubyracer 0.9.0beta4 → 0.9.0beta5

data/ext/v8/upstream/scons/LICENSE.txt

@@ -1,20 +0,0 @@
-Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
-KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
-WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/ext/v8/upstream/scons/MANIFEST

@@ -1,202 +0,0 @@
-CHANGES.txt
-LICENSE.txt
-MANIFEST
-README.txt
-RELEASE.txt
-engine/SCons/Action.py
-engine/SCons/Builder.py
-engine/SCons/CacheDir.py
-engine/SCons/Conftest.py
-engine/SCons/Debug.py
-engine/SCons/Defaults.py
-engine/SCons/Environment.py
-engine/SCons/Errors.py
-engine/SCons/Executor.py
-engine/SCons/Job.py
-engine/SCons/Memoize.py
-engine/SCons/Node/Alias.py
-engine/SCons/Node/FS.py
-engine/SCons/Node/Python.py
-engine/SCons/Node/__init__.py
-engine/SCons/Options/BoolOption.py
-engine/SCons/Options/EnumOption.py
-engine/SCons/Options/ListOption.py
-engine/SCons/Options/PackageOption.py
-engine/SCons/Options/PathOption.py
-engine/SCons/Options/__init__.py
-engine/SCons/PathList.py
-engine/SCons/Platform/__init__.py
-engine/SCons/Platform/aix.py
-engine/SCons/Platform/cygwin.py
-engine/SCons/Platform/darwin.py
-engine/SCons/Platform/hpux.py
-engine/SCons/Platform/irix.py
-engine/SCons/Platform/os2.py
-engine/SCons/Platform/posix.py
-engine/SCons/Platform/sunos.py
-engine/SCons/Platform/win32.py
-engine/SCons/SConf.py
-engine/SCons/SConsign.py
-engine/SCons/Scanner/C.py
-engine/SCons/Scanner/D.py
-engine/SCons/Scanner/Dir.py
-engine/SCons/Scanner/Fortran.py
-engine/SCons/Scanner/IDL.py
-engine/SCons/Scanner/LaTeX.py
-engine/SCons/Scanner/Prog.py
-engine/SCons/Scanner/RC.py
-engine/SCons/Scanner/__init__.py
-engine/SCons/Script/Interactive.py
-engine/SCons/Script/Main.py
-engine/SCons/Script/SConsOptions.py
-engine/SCons/Script/SConscript.py
-engine/SCons/Script/__init__.py
-engine/SCons/Sig.py
-engine/SCons/Subst.py
-engine/SCons/Taskmaster.py
-engine/SCons/Tool/386asm.py
-engine/SCons/Tool/BitKeeper.py
-engine/SCons/Tool/CVS.py
-engine/SCons/Tool/FortranCommon.py
-engine/SCons/Tool/JavaCommon.py
-engine/SCons/Tool/MSCommon/__init__.py
-engine/SCons/Tool/MSCommon/arch.py
-engine/SCons/Tool/MSCommon/common.py
-engine/SCons/Tool/MSCommon/netframework.py
-engine/SCons/Tool/MSCommon/sdk.py
-engine/SCons/Tool/MSCommon/vc.py
-engine/SCons/Tool/MSCommon/vs.py
-engine/SCons/Tool/Perforce.py
-engine/SCons/Tool/PharLapCommon.py
-engine/SCons/Tool/RCS.py
-engine/SCons/Tool/SCCS.py
-engine/SCons/Tool/Subversion.py
-engine/SCons/Tool/__init__.py
-engine/SCons/Tool/aixc++.py
-engine/SCons/Tool/aixcc.py
-engine/SCons/Tool/aixf77.py
-engine/SCons/Tool/aixlink.py
-engine/SCons/Tool/applelink.py
-engine/SCons/Tool/ar.py
-engine/SCons/Tool/as.py
-engine/SCons/Tool/bcc32.py
-engine/SCons/Tool/c++.py
-engine/SCons/Tool/cc.py
-engine/SCons/Tool/cvf.py
-engine/SCons/Tool/default.py
-engine/SCons/Tool/dmd.py
-engine/SCons/Tool/dvi.py
-engine/SCons/Tool/dvipdf.py
-engine/SCons/Tool/dvips.py
-engine/SCons/Tool/f77.py
-engine/SCons/Tool/f90.py
-engine/SCons/Tool/f95.py
-engine/SCons/Tool/filesystem.py
-engine/SCons/Tool/fortran.py
-engine/SCons/Tool/g++.py
-engine/SCons/Tool/g77.py
-engine/SCons/Tool/gas.py
-engine/SCons/Tool/gcc.py
-engine/SCons/Tool/gfortran.py
-engine/SCons/Tool/gnulink.py
-engine/SCons/Tool/gs.py
-engine/SCons/Tool/hpc++.py
-engine/SCons/Tool/hpcc.py
-engine/SCons/Tool/hplink.py
-engine/SCons/Tool/icc.py
-engine/SCons/Tool/icl.py
-engine/SCons/Tool/ifl.py
-engine/SCons/Tool/ifort.py
-engine/SCons/Tool/ilink.py
-engine/SCons/Tool/ilink32.py
-engine/SCons/Tool/install.py
-engine/SCons/Tool/intelc.py
-engine/SCons/Tool/ipkg.py
-engine/SCons/Tool/jar.py
-engine/SCons/Tool/javac.py
-engine/SCons/Tool/javah.py
-engine/SCons/Tool/latex.py
-engine/SCons/Tool/lex.py
-engine/SCons/Tool/link.py
-engine/SCons/Tool/linkloc.py
-engine/SCons/Tool/m4.py
-engine/SCons/Tool/masm.py
-engine/SCons/Tool/midl.py
-engine/SCons/Tool/mingw.py
-engine/SCons/Tool/mslib.py
-engine/SCons/Tool/mslink.py
-engine/SCons/Tool/mssdk.py
-engine/SCons/Tool/msvc.py
-engine/SCons/Tool/msvs.py
-engine/SCons/Tool/mwcc.py
-engine/SCons/Tool/mwld.py
-engine/SCons/Tool/nasm.py
-engine/SCons/Tool/packaging/__init__.py
-engine/SCons/Tool/packaging/ipk.py
-engine/SCons/Tool/packaging/msi.py
-engine/SCons/Tool/packaging/rpm.py
-engine/SCons/Tool/packaging/src_tarbz2.py
-engine/SCons/Tool/packaging/src_targz.py
-engine/SCons/Tool/packaging/src_zip.py
-engine/SCons/Tool/packaging/tarbz2.py
-engine/SCons/Tool/packaging/targz.py
-engine/SCons/Tool/packaging/zip.py
-engine/SCons/Tool/pdf.py
-engine/SCons/Tool/pdflatex.py
-engine/SCons/Tool/pdftex.py
-engine/SCons/Tool/qt.py
-engine/SCons/Tool/rmic.py
-engine/SCons/Tool/rpcgen.py
-engine/SCons/Tool/rpm.py
-engine/SCons/Tool/sgiar.py
-engine/SCons/Tool/sgic++.py
-engine/SCons/Tool/sgicc.py
-engine/SCons/Tool/sgilink.py
-engine/SCons/Tool/sunar.py
-engine/SCons/Tool/sunc++.py
-engine/SCons/Tool/suncc.py
-engine/SCons/Tool/sunf77.py
-engine/SCons/Tool/sunf90.py
-engine/SCons/Tool/sunf95.py
-engine/SCons/Tool/sunlink.py
-engine/SCons/Tool/swig.py
-engine/SCons/Tool/tar.py
-engine/SCons/Tool/tex.py
-engine/SCons/Tool/textfile.py
-engine/SCons/Tool/tlib.py
-engine/SCons/Tool/wix.py
-engine/SCons/Tool/yacc.py
-engine/SCons/Tool/zip.py
-engine/SCons/Util.py
-engine/SCons/Variables/BoolVariable.py
-engine/SCons/Variables/EnumVariable.py
-engine/SCons/Variables/ListVariable.py
-engine/SCons/Variables/PackageVariable.py
-engine/SCons/Variables/PathVariable.py
-engine/SCons/Variables/__init__.py
-engine/SCons/Warnings.py
-engine/SCons/__init__.py
-engine/SCons/compat/__init__.py
-engine/SCons/compat/_scons_UserString.py
-engine/SCons/compat/_scons_hashlib.py
-engine/SCons/compat/_scons_itertools.py
-engine/SCons/compat/_scons_optparse.py
-engine/SCons/compat/_scons_sets.py
-engine/SCons/compat/_scons_sets15.py
-engine/SCons/compat/_scons_shlex.py
-engine/SCons/compat/_scons_subprocess.py
-engine/SCons/compat/_scons_textwrap.py
-engine/SCons/compat/builtins.py
-engine/SCons/cpp.py
-engine/SCons/dblite.py
-engine/SCons/exitfuncs.py
-os_spawnv_fix.diff
-scons-time.1
-scons.1
-sconsign.1
-script/scons
-script/scons-time
-script/scons.bat
-script/sconsign
-setup.cfg
-setup.py

data/ext/v8/upstream/scons/PKG-INFO

@@ -1,13 +0,0 @@
-Metadata-Version: 1.0
-Name: scons
-Version: 1.2.0.d20100117
-Summary: Open Source next-generation build tool.
-Home-page: http://www.scons.org/
-Author: Steven Knight
-Author-email: knight@baldmt.com
-License: UNKNOWN
-Description: Open Source next-generation build tool.
-        Improved, cross-platform substitute for the classic Make
-        utility.  In short, SCons is an easier, more reliable
-        and faster way to build software.
-Platform: UNKNOWN

data/ext/v8/upstream/scons/README.txt

@@ -1,273 +0,0 @@
-# Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation
-# src/README.txt 4629 2010/01/17 22:23:21 scons
-
-
-                 SCons - a software construction tool
-
-                         Version 1.2.0.d20100117
-
-
-This is SCons, a tool for building software (and other files).  SCons is
-implemented in Python, and its "configuration files" are actually Python
-scripts, allowing you to use the full power of a real scripting language
-to solve build problems.  You do not, however, need to know Python to
-use SCons effectively.
-
-See the RELEASE.txt file for notes about this specific release,
-including known problems.  See the CHANGES.txt file for a list of
-changes since the previous release.
-
-
-LATEST VERSION
-==============
-
-Before going further, you can check that this package you have is
-the latest version by checking the SCons download page at:
-
-        http://www.scons.org/download.html
-
-
-EXECUTION REQUIREMENTS
-======================
-
-Running SCons requires Python version 1.5.2 or later.  There should be
-no other dependencies or requirements to run SCons.  (There is, however,
-an additional requirement to *install* SCons from this particular
-package; see the next section.)
-
-By default, SCons knows how to search for available programming tools
-on various systems--see the SCons man page for details.  You may,
-of course, override the default SCons choices made by appropriate
-configuration of Environment construction variables.
-
-
-INSTALLATION REQUIREMENTS
-=========================
-
-Installing SCons from this package requires the Python distutils
-package.  The distutils package was not shipped as a standard part of
-Python until Python version 1.6, so if your system is running Python
-1.5.2, you may not have distutils installed.  If you are running
-Python version 1.6 or later, you should be fine.
-
-NOTE TO RED HAT USERS:  Red Hat shipped Python 1.5.2 as the default all
-the way up to Red Hat Linux 7.3, so you probably do *not* have distutils
-installed, unless you have already done so manually or are running Red
-Hat 8.0 or later.
-
-In this case, your options are:
-
-    --  (Recommended.)  Install from a pre-packaged SCons package that
-        does not require distutils:
-
-            Red Hat Linux       scons-1.2.0.d20100117-1.noarch.rpm
-
-            Debian GNU/Linux    scons_1.2.0.d20100117-1_all.deb
-                                (or use apt-get)
-
-            Windows             scons-1.2.0.d20100117.win32.exe
-
-    --  (Optional.)  Download the latest distutils package from the
-        following URL:
-
-            http://www.python.org/sigs/distutils-sig/download.html
-
-        Install the distutils according to the instructions on the page.
-        You can then proceed to the next section to install SCons from
-        this package.
-
-
-INSTALLATION
-============
-
-Assuming your system satisfies the installation requirements in the
-previous section, install SCons from this package simply by running the
-provided Python-standard setup script as follows:
-
-        # python setup.py install
-
-By default, the above command will do the following:
-
-    --  Install the version-numbered "scons-1.2.0.d20100117" and "sconsign-1.2.0.d20100117"
-        scripts in the default system script directory (/usr/bin or
-        C:\Python*\Scripts, for example).  This can be disabled by
-        specifying the "--no-version-script" option on the command
-        line.
-
-    --  Install scripts named "scons" and "sconsign" scripts in the
-        default system script directory (/usr/bin or C:\Python*\Scripts,
-        for example).  This can be disabled by specifying the
-        "--no-scons-script" option on the command line, which is useful
-        if you want to install and experiment with a new version before
-        making it the default on your system.
-
-        On UNIX or Linux systems, you can have the "scons" and "sconsign"
-        scripts be hard links or symbolic links to the "scons-1.2.0.d20100117" and
-        "sconsign-1.2.0.d20100117" scripts by specifying the "--hardlink-scons"
-        or "--symlink-scons" options on the command line.
-
-    --  Install "scons-1.2.0.d20100117.bat" and "scons.bat" wrapper scripts in the
-        Python prefix directory on Windows (C:\Python*, for example).
-        This can be disabled by specifying the "--no-install-bat" option
-        on the command line.
-
-        On UNIX or Linux systems, the "--install-bat" option may be
-        specified to have "scons-1.2.0.d20100117.bat" and "scons.bat" files
-        installed in the default system script directory, which is useful
-        if you want to install SCons in a shared file system directory
-        that can be used to execute SCons from both UNIX/Linux and
-        Windows systems.
-
-    --  Install the SCons build engine (a Python module) in an
-        appropriate version-numbered SCons library directory
-        (/usr/lib/scons-1.2.0.d20100117 or C:\Python*\scons-1.2.0.d20100117, for example).
-        See below for more options related to installing the build
-        engine library.
-
-    --  Install the troff-format man pages in an appropriate directory
-        on UNIX or Linux systems (/usr/share/man/man1 or /usr/man/man1,
-        for example).  This can be disabled by specifying the
-        "--no-install-man" option on the command line.  The man pages
-        can be installed on Windows systems by specifying the
-        "--install-man" option on the command line.
-
-Note that, by default, SCons does not install its build engine library
-in the standard Python library directories.  If you want to be able to
-use the SCons library modules (the build engine) in other Python
-scripts, specify the "--standard-lib" option on the command line, as
-follows:
-
-        # python setup.py install --standard-lib
-
-This will install the build engine in the standard Python library
-directory (/usr/lib/python*/site-packages or
-C:\Python*\Lib\site-packages).
-
-Alternatively, you can have SCons install its build engine library in a
-hard-coded standalone library directory, instead of the default
-version-numbered directory, by specifying the "--standalone-lib" option
-on the command line, as follows:
-
-        # python setup.py install --standalone-lib
-
-This is usually not recommended, however.
-
-Note that, to install SCons in any of the above system directories,
-you should have system installation privileges (that is, "root" or
-"Administrator") when running the setup.py script.  If you don't have
-system installation privileges, you can use the --prefix option to
-specify an alternate installation location, such as your home directory:
-
-        $ python setup.py install --prefix=$HOME
-
-This will install SCons in the appropriate locations relative to
-$HOME--that is, the scons script itself $HOME/bin and the associated
-library in $HOME/lib/scons, for example.
-
-
-DOCUMENTATION
-=============
-
-See the RELEASE.txt file for notes about this specific release,
-including known problems.  See the CHANGES.txt file for a list of
-changes since the previous release.
-
-The scons.1 man page is included in this package, and contains a section
-of small examples for getting started using SCons.
-
-Additional documentation for SCons is available at:
-
-        http://www.scons.org/doc.html
-
-
-LICENSING
-=========
-
-SCons is distributed under the MIT license, a full copy of which is
-available in the LICENSE.txt file. The MIT license is an approved Open
-Source license, which means:
-
-        This software is OSI Certified Open Source Software.  OSI
-        Certified is a certification mark of the Open Source Initiative.
-
-More information about OSI certifications and Open Source software is
-available at:
-
-        http://www.opensource.org/
-
-
-REPORTING BUGS
-==============
-
-Please report bugs by following the detailed instructions on our Bug
-Submission page:
-
-        http://scons.tigris.org/bug-submission.html
-
-You can also send mail to the SCons developers' mailing list:
-
-        dev@scons.tigris.org
-
-But even if you send email to the mailing list please make sure that you
-ALSO submit a bug report to the project page bug tracker, because bug
-reports in email often get overlooked in the general flood of messages.
-
-
-MAILING LISTS
-=============
-
-An active mailing list for users of SCons is available.  You may send
-questions or comments to the list at:
-
-        users@scons.tigris.org
-
-You may subscribe to the mailing list by sending email to:
-
-        users-subscribe@scons.tigris.org
-
-There is also a low-volume mailing list available for announcements
-about SCons.  Subscribe by sending email to:
-
-        announce-subscribe@scons.tigris.org
-
-There are other mailing lists available for SCons developers, for
-notification of SCons code changes, and for notification of updated
-bug reports and project documents.  Please see our mailing lists page
-for details.
-
-
-DONATIONS
-=========
-
-If you find SCons helpful, please consider making a donation (of cash,
-software, or hardware) to support continued work on the project.
-Information is available at:
-
-        http://www.scons.org/donate.html
-
-
-FOR MORE INFORMATION
-====================
-
-Check the SCons web site at:
-
-        http://www.scons.org/
-
-
-AUTHOR INFO
-===========
-
-Steven Knight
-knight at baldmt dot com
-http://www.baldmt.com/~knight/
-
-With plenty of help from the SCons Development team:
-        Chad Austin
-        Charles Crain
-        Steve Leblanc
-        Greg Noel
-        Gary Oberbrunner
-        Anthony Roach
-        Greg Spencer
-        Christoph Wiedemann
-