therubyracer 0.9.0beta4 → 0.9.0beta5

data/ext/v8/upstream/v8/src/strtod.cc

@@ -1,440 +0,0 @@
-// Copyright 2010 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <stdarg.h>
-#include <limits.h>
-
-#include "v8.h"
-
-#include "strtod.h"
-#include "bignum.h"
-#include "cached-powers.h"
-#include "double.h"
-
-namespace v8 {
-namespace internal {
-
-// 2^53 = 9007199254740992.
-// Any integer with at most 15 decimal digits will hence fit into a double
-// (which has a 53bit significand) without loss of precision.
-static const int kMaxExactDoubleIntegerDecimalDigits = 15;
-// 2^64 = 18446744073709551616 > 10^19
-static const int kMaxUint64DecimalDigits = 19;
-
-// Max double: 1.7976931348623157 x 10^308
-// Min non-zero double: 4.9406564584124654 x 10^-324
-// Any x >= 10^309 is interpreted as +infinity.
-// Any x <= 10^-324 is interpreted as 0.
-// Note that 2.5e-324 (despite being smaller than the min double) will be read
-// as non-zero (equal to the min non-zero double).
-static const int kMaxDecimalPower = 309;
-static const int kMinDecimalPower = -324;
-
-// 2^64 = 18446744073709551616
-static const uint64_t kMaxUint64 = V8_2PART_UINT64_C(0xFFFFFFFF, FFFFFFFF);
-
-
-static const double exact_powers_of_ten[] = {
-  1.0,  // 10^0
-  10.0,
-  100.0,
-  1000.0,
-  10000.0,
-  100000.0,
-  1000000.0,
-  10000000.0,
-  100000000.0,
-  1000000000.0,
-  10000000000.0,  // 10^10
-  100000000000.0,
-  1000000000000.0,
-  10000000000000.0,
-  100000000000000.0,
-  1000000000000000.0,
-  10000000000000000.0,
-  100000000000000000.0,
-  1000000000000000000.0,
-  10000000000000000000.0,
-  100000000000000000000.0,  // 10^20
-  1000000000000000000000.0,
-  // 10^22 = 0x21e19e0c9bab2400000 = 0x878678326eac9 * 2^22
-  10000000000000000000000.0
-};
-static const int kExactPowersOfTenSize = ARRAY_SIZE(exact_powers_of_ten);
-
-// Maximum number of significant digits in the decimal representation.
-// In fact the value is 772 (see conversions.cc), but to give us some margin
-// we round up to 780.
-static const int kMaxSignificantDecimalDigits = 780;
-
-static Vector<const char> TrimLeadingZeros(Vector<const char> buffer) {
-  for (int i = 0; i < buffer.length(); i++) {
-    if (buffer[i] != '0') {
-      return buffer.SubVector(i, buffer.length());
-    }
-  }
-  return Vector<const char>(buffer.start(), 0);
-}
-
-
-static Vector<const char> TrimTrailingZeros(Vector<const char> buffer) {
-  for (int i = buffer.length() - 1; i >= 0; --i) {
-    if (buffer[i] != '0') {
-      return buffer.SubVector(0, i + 1);
-    }
-  }
-  return Vector<const char>(buffer.start(), 0);
-}
-
-
-static void TrimToMaxSignificantDigits(Vector<const char> buffer,
-                                       int exponent,
-                                       char* significant_buffer,
-                                       int* significant_exponent) {
-  for (int i = 0; i < kMaxSignificantDecimalDigits - 1; ++i) {
-    significant_buffer[i] = buffer[i];
-  }
-  // The input buffer has been trimmed. Therefore the last digit must be
-  // different from '0'.
-  ASSERT(buffer[buffer.length() - 1] != '0');
-  // Set the last digit to be non-zero. This is sufficient to guarantee
-  // correct rounding.
-  significant_buffer[kMaxSignificantDecimalDigits - 1] = '1';
-  *significant_exponent =
-      exponent + (buffer.length() - kMaxSignificantDecimalDigits);
-}
-
-// Reads digits from the buffer and converts them to a uint64.
-// Reads in as many digits as fit into a uint64.
-// When the string starts with "1844674407370955161" no further digit is read.
-// Since 2^64 = 18446744073709551616 it would still be possible read another
-// digit if it was less or equal than 6, but this would complicate the code.
-static uint64_t ReadUint64(Vector<const char> buffer,
-                           int* number_of_read_digits) {
-  uint64_t result = 0;
-  int i = 0;
-  while (i < buffer.length() && result <= (kMaxUint64 / 10 - 1)) {
-    int digit = buffer[i++] - '0';
-    ASSERT(0 <= digit && digit <= 9);
-    result = 10 * result + digit;
-  }
-  *number_of_read_digits = i;
-  return result;
-}
-
-
-// Reads a DiyFp from the buffer.
-// The returned DiyFp is not necessarily normalized.
-// If remaining_decimals is zero then the returned DiyFp is accurate.
-// Otherwise it has been rounded and has error of at most 1/2 ulp.
-static void ReadDiyFp(Vector<const char> buffer,
-                      DiyFp* result,
-                      int* remaining_decimals) {
-  int read_digits;
-  uint64_t significand = ReadUint64(buffer, &read_digits);
-  if (buffer.length() == read_digits) {
-    *result = DiyFp(significand, 0);
-    *remaining_decimals = 0;
-  } else {
-    // Round the significand.
-    if (buffer[read_digits] >= '5') {
-      significand++;
-    }
-    // Compute the binary exponent.
-    int exponent = 0;
-    *result = DiyFp(significand, exponent);
-    *remaining_decimals = buffer.length() - read_digits;
-  }
-}
-
-
-static bool DoubleStrtod(Vector<const char> trimmed,
-                         int exponent,
-                         double* result) {
-#if (defined(V8_TARGET_ARCH_IA32) || defined(USE_SIMULATOR)) && !defined(WIN32)
-  // On x86 the floating-point stack can be 64 or 80 bits wide. If it is
-  // 80 bits wide (as is the case on Linux) then double-rounding occurs and the
-  // result is not accurate.
-  // We know that Windows32 uses 64 bits and is therefore accurate.
-  // Note that the ARM simulator is compiled for 32bits. It therefore exhibits
-  // the same problem.
-  return false;
-#endif
-  if (trimmed.length() <= kMaxExactDoubleIntegerDecimalDigits) {
-    int read_digits;
-    // The trimmed input fits into a double.
-    // If the 10^exponent (resp. 10^-exponent) fits into a double too then we
-    // can compute the result-double simply by multiplying (resp. dividing) the
-    // two numbers.
-    // This is possible because IEEE guarantees that floating-point operations
-    // return the best possible approximation.
-    if (exponent < 0 && -exponent < kExactPowersOfTenSize) {
-      // 10^-exponent fits into a double.
-      *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-      ASSERT(read_digits == trimmed.length());
-      *result /= exact_powers_of_ten[-exponent];
-      return true;
-    }
-    if (0 <= exponent && exponent < kExactPowersOfTenSize) {
-      // 10^exponent fits into a double.
-      *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-      ASSERT(read_digits == trimmed.length());
-      *result *= exact_powers_of_ten[exponent];
-      return true;
-    }
-    int remaining_digits =
-        kMaxExactDoubleIntegerDecimalDigits - trimmed.length();
-    if ((0 <= exponent) &&
-        (exponent - remaining_digits < kExactPowersOfTenSize)) {
-      // The trimmed string was short and we can multiply it with
-      // 10^remaining_digits. As a result the remaining exponent now fits
-      // into a double too.
-      *result = static_cast<double>(ReadUint64(trimmed, &read_digits));
-      ASSERT(read_digits == trimmed.length());
-      *result *= exact_powers_of_ten[remaining_digits];
-      *result *= exact_powers_of_ten[exponent - remaining_digits];
-      return true;
-    }
-  }
-  return false;
-}
-
-
-// Returns 10^exponent as an exact DiyFp.
-// The given exponent must be in the range [1; kDecimalExponentDistance[.
-static DiyFp AdjustmentPowerOfTen(int exponent) {
-  ASSERT(0 < exponent);
-  ASSERT(exponent < PowersOfTenCache::kDecimalExponentDistance);
-  // Simply hardcode the remaining powers for the given decimal exponent
-  // distance.
-  ASSERT(PowersOfTenCache::kDecimalExponentDistance == 8);
-  switch (exponent) {
-    case 1: return DiyFp(V8_2PART_UINT64_C(0xa0000000, 00000000), -60);
-    case 2: return DiyFp(V8_2PART_UINT64_C(0xc8000000, 00000000), -57);
-    case 3: return DiyFp(V8_2PART_UINT64_C(0xfa000000, 00000000), -54);
-    case 4: return DiyFp(V8_2PART_UINT64_C(0x9c400000, 00000000), -50);
-    case 5: return DiyFp(V8_2PART_UINT64_C(0xc3500000, 00000000), -47);
-    case 6: return DiyFp(V8_2PART_UINT64_C(0xf4240000, 00000000), -44);
-    case 7: return DiyFp(V8_2PART_UINT64_C(0x98968000, 00000000), -40);
-    default:
-      UNREACHABLE();
-      return DiyFp(0, 0);
-  }
-}
-
-
-// If the function returns true then the result is the correct double.
-// Otherwise it is either the correct double or the double that is just below
-// the correct double.
-static bool DiyFpStrtod(Vector<const char> buffer,
-                        int exponent,
-                        double* result) {
-  DiyFp input;
-  int remaining_decimals;
-  ReadDiyFp(buffer, &input, &remaining_decimals);
-  // Since we may have dropped some digits the input is not accurate.
-  // If remaining_decimals is different than 0 than the error is at most
-  // .5 ulp (unit in the last place).
-  // We don't want to deal with fractions and therefore keep a common
-  // denominator.
-  const int kDenominatorLog = 3;
-  const int kDenominator = 1 << kDenominatorLog;
-  // Move the remaining decimals into the exponent.
-  exponent += remaining_decimals;
-  int error = (remaining_decimals == 0 ? 0 : kDenominator / 2);
-
-  int old_e = input.e();
-  input.Normalize();
-  error <<= old_e - input.e();
-
-  ASSERT(exponent <= PowersOfTenCache::kMaxDecimalExponent);
-  if (exponent < PowersOfTenCache::kMinDecimalExponent) {
-    *result = 0.0;
-    return true;
-  }
-  DiyFp cached_power;
-  int cached_decimal_exponent;
-  PowersOfTenCache::GetCachedPowerForDecimalExponent(exponent,
-                                                     &cached_power,
-                                                     &cached_decimal_exponent);
-
-  if (cached_decimal_exponent != exponent) {
-    int adjustment_exponent = exponent - cached_decimal_exponent;
-    DiyFp adjustment_power = AdjustmentPowerOfTen(adjustment_exponent);
-    input.Multiply(adjustment_power);
-    if (kMaxUint64DecimalDigits - buffer.length() >= adjustment_exponent) {
-      // The product of input with the adjustment power fits into a 64 bit
-      // integer.
-      ASSERT(DiyFp::kSignificandSize == 64);
-    } else {
-      // The adjustment power is exact. There is hence only an error of 0.5.
-      error += kDenominator / 2;
-    }
-  }
-
-  input.Multiply(cached_power);
-  // The error introduced by a multiplication of a*b equals
-  //   error_a + error_b + error_a*error_b/2^64 + 0.5
-  // Substituting a with 'input' and b with 'cached_power' we have
-  //   error_b = 0.5  (all cached powers have an error of less than 0.5 ulp),
-  //   error_ab = 0 or 1 / kDenominator > error_a*error_b/ 2^64
-  int error_b = kDenominator / 2;
-  int error_ab = (error == 0 ? 0 : 1);  // We round up to 1.
-  int fixed_error = kDenominator / 2;
-  error += error_b + error_ab + fixed_error;
-
-  old_e = input.e();
-  input.Normalize();
-  error <<= old_e - input.e();
-
-  // See if the double's significand changes if we add/subtract the error.
-  int order_of_magnitude = DiyFp::kSignificandSize + input.e();
-  int effective_significand_size =
-      Double::SignificandSizeForOrderOfMagnitude(order_of_magnitude);
-  int precision_digits_count =
-      DiyFp::kSignificandSize - effective_significand_size;
-  if (precision_digits_count + kDenominatorLog >= DiyFp::kSignificandSize) {
-    // This can only happen for very small denormals. In this case the
-    // half-way multiplied by the denominator exceeds the range of an uint64.
-    // Simply shift everything to the right.
-    int shift_amount = (precision_digits_count + kDenominatorLog) -
-        DiyFp::kSignificandSize + 1;
-    input.set_f(input.f() >> shift_amount);
-    input.set_e(input.e() + shift_amount);
-    // We add 1 for the lost precision of error, and kDenominator for
-    // the lost precision of input.f().
-    error = (error >> shift_amount) + 1 + kDenominator;
-    precision_digits_count -= shift_amount;
-  }
-  // We use uint64_ts now. This only works if the DiyFp uses uint64_ts too.
-  ASSERT(DiyFp::kSignificandSize == 64);
-  ASSERT(precision_digits_count < 64);
-  uint64_t one64 = 1;
-  uint64_t precision_bits_mask = (one64 << precision_digits_count) - 1;
-  uint64_t precision_bits = input.f() & precision_bits_mask;
-  uint64_t half_way = one64 << (precision_digits_count - 1);
-  precision_bits *= kDenominator;
-  half_way *= kDenominator;
-  DiyFp rounded_input(input.f() >> precision_digits_count,
-                      input.e() + precision_digits_count);
-  if (precision_bits >= half_way + error) {
-    rounded_input.set_f(rounded_input.f() + 1);
-  }
-  // If the last_bits are too close to the half-way case than we are too
-  // inaccurate and round down. In this case we return false so that we can
-  // fall back to a more precise algorithm.
-
-  *result = Double(rounded_input).value();
-  if (half_way - error < precision_bits && precision_bits < half_way + error) {
-    // Too imprecise. The caller will have to fall back to a slower version.
-    // However the returned number is guaranteed to be either the correct
-    // double, or the next-lower double.
-    return false;
-  } else {
-    return true;
-  }
-}
-
-
-// Returns the correct double for the buffer*10^exponent.
-// The variable guess should be a close guess that is either the correct double
-// or its lower neighbor (the nearest double less than the correct one).
-// Preconditions:
-//   buffer.length() + exponent <= kMaxDecimalPower + 1
-//   buffer.length() + exponent > kMinDecimalPower
-//   buffer.length() <= kMaxDecimalSignificantDigits
-static double BignumStrtod(Vector<const char> buffer,
-                           int exponent,
-                           double guess) {
-  if (guess == V8_INFINITY) {
-    return guess;
-  }
-
-  DiyFp upper_boundary = Double(guess).UpperBoundary();
-
-  ASSERT(buffer.length() + exponent <= kMaxDecimalPower + 1);
-  ASSERT(buffer.length() + exponent > kMinDecimalPower);
-  ASSERT(buffer.length() <= kMaxSignificantDecimalDigits);
-  // Make sure that the Bignum will be able to hold all our numbers.
-  // Our Bignum implementation has a separate field for exponents. Shifts will
-  // consume at most one bigit (< 64 bits).
-  // ln(10) == 3.3219...
-  ASSERT(((kMaxDecimalPower + 1) * 333 / 100) < Bignum::kMaxSignificantBits);
-  Bignum input;
-  Bignum boundary;
-  input.AssignDecimalString(buffer);
-  boundary.AssignUInt64(upper_boundary.f());
-  if (exponent >= 0) {
-    input.MultiplyByPowerOfTen(exponent);
-  } else {
-    boundary.MultiplyByPowerOfTen(-exponent);
-  }
-  if (upper_boundary.e() > 0) {
-    boundary.ShiftLeft(upper_boundary.e());
-  } else {
-    input.ShiftLeft(-upper_boundary.e());
-  }
-  int comparison = Bignum::Compare(input, boundary);
-  if (comparison < 0) {
-    return guess;
-  } else if (comparison > 0) {
-    return Double(guess).NextDouble();
-  } else if ((Double(guess).Significand() & 1) == 0) {
-    // Round towards even.
-    return guess;
-  } else {
-    return Double(guess).NextDouble();
-  }
-}
-
-
-double Strtod(Vector<const char> buffer, int exponent) {
-  Vector<const char> left_trimmed = TrimLeadingZeros(buffer);
-  Vector<const char> trimmed = TrimTrailingZeros(left_trimmed);
-  exponent += left_trimmed.length() - trimmed.length();
-  if (trimmed.length() == 0) return 0.0;
-  if (trimmed.length() > kMaxSignificantDecimalDigits) {
-    char significant_buffer[kMaxSignificantDecimalDigits];
-    int significant_exponent;
-    TrimToMaxSignificantDigits(trimmed, exponent,
-                               significant_buffer, &significant_exponent);
-    return Strtod(Vector<const char>(significant_buffer,
-                                     kMaxSignificantDecimalDigits),
-                  significant_exponent);
-  }
-  if (exponent + trimmed.length() - 1 >= kMaxDecimalPower) return V8_INFINITY;
-  if (exponent + trimmed.length() <= kMinDecimalPower) return 0.0;
-
-  double guess;
-  if (DoubleStrtod(trimmed, exponent, &guess) ||
-      DiyFpStrtod(trimmed, exponent, &guess)) {
-    return guess;
-  }
-  return BignumStrtod(trimmed, exponent, guess);
-}
-
-} }  // namespace v8::internal

data/ext/v8/upstream/v8/src/strtod.h

@@ -1,40 +0,0 @@
-// Copyright 2010 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#ifndef V8_STRTOD_H_
-#define V8_STRTOD_H_
-
-namespace v8 {
-namespace internal {
-
-// The buffer must only contain digits in the range [0-9]. It must not
-// contain a dot or a sign. It must not start with '0', and must not be empty.
-double Strtod(Vector<const char> buffer, int exponent);
-
-} }  // namespace v8::internal
-
-#endif  // V8_STRTOD_H_