therubyracer 0.5.0-x86-linux → 0.11.0beta5-x86-linux

data/ext/v8/upstream/2.0.6/src/arm/assembler-arm.cc

@@ -1,1821 +0,0 @@
-// Copyright (c) 1994-2006 Sun Microsystems Inc.
-// All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-//
-// - Redistributions of source code must retain the above copyright notice,
-// this list of conditions and the following disclaimer.
-//
-// - Redistribution in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the
-// distribution.
-//
-// - Neither the name of Sun Microsystems or the names of contributors may
-// be used to endorse or promote products derived from this software without
-// specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-// HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-// OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// The original source code covered by the above license above has been modified
-// significantly by Google Inc.
-// Copyright 2006-2008 the V8 project authors. All rights reserved.
-
-#include "v8.h"
-
-#include "arm/assembler-arm-inl.h"
-#include "serialize.h"
-
-namespace v8 {
-namespace internal {
-
-// Safe default is no features.
-unsigned CpuFeatures::supported_ = 0;
-unsigned CpuFeatures::enabled_ = 0;
-unsigned CpuFeatures::found_by_runtime_probing_ = 0;
-
-void CpuFeatures::Probe() {
-  // If the compiler is allowed to use vfp then we can use vfp too in our
-  // code generation.
-#if !defined(__arm__)
-  // For the simulator=arm build, always use VFP since the arm simulator has
-  // VFP support.
-  supported_ |= 1u << VFP3;
-#else
-  if (Serializer::enabled()) {
-    supported_ |= OS::CpuFeaturesImpliedByPlatform();
-    return;  // No features if we might serialize.
-  }
-
-  if (OS::ArmCpuHasFeature(VFP3)) {
-    // This implementation also sets the VFP flags if
-    // runtime detection of VFP returns true.
-    supported_ |= 1u << VFP3;
-    found_by_runtime_probing_ |= 1u << VFP3;
-  }
-#endif
-}
-
-
-// -----------------------------------------------------------------------------
-// Implementation of Register and CRegister
-
-Register no_reg = { -1 };
-
-Register r0  = {  0 };
-Register r1  = {  1 };
-Register r2  = {  2 };
-Register r3  = {  3 };
-Register r4  = {  4 };
-Register r5  = {  5 };
-Register r6  = {  6 };
-Register r7  = {  7 };
-Register r8  = {  8 };
-Register r9  = {  9 };
-Register r10 = { 10 };
-Register fp  = { 11 };
-Register ip  = { 12 };
-Register sp  = { 13 };
-Register lr  = { 14 };
-Register pc  = { 15 };
-
-
-CRegister no_creg = { -1 };
-
-CRegister cr0  = {  0 };
-CRegister cr1  = {  1 };
-CRegister cr2  = {  2 };
-CRegister cr3  = {  3 };
-CRegister cr4  = {  4 };
-CRegister cr5  = {  5 };
-CRegister cr6  = {  6 };
-CRegister cr7  = {  7 };
-CRegister cr8  = {  8 };
-CRegister cr9  = {  9 };
-CRegister cr10 = { 10 };
-CRegister cr11 = { 11 };
-CRegister cr12 = { 12 };
-CRegister cr13 = { 13 };
-CRegister cr14 = { 14 };
-CRegister cr15 = { 15 };
-
-// Support for the VFP registers s0 to s31 (d0 to d15).
-// Note that "sN:sM" is the same as "dN/2".
-SwVfpRegister s0  = {  0 };
-SwVfpRegister s1  = {  1 };
-SwVfpRegister s2  = {  2 };
-SwVfpRegister s3  = {  3 };
-SwVfpRegister s4  = {  4 };
-SwVfpRegister s5  = {  5 };
-SwVfpRegister s6  = {  6 };
-SwVfpRegister s7  = {  7 };
-SwVfpRegister s8  = {  8 };
-SwVfpRegister s9  = {  9 };
-SwVfpRegister s10 = { 10 };
-SwVfpRegister s11 = { 11 };
-SwVfpRegister s12 = { 12 };
-SwVfpRegister s13 = { 13 };
-SwVfpRegister s14 = { 14 };
-SwVfpRegister s15 = { 15 };
-SwVfpRegister s16 = { 16 };
-SwVfpRegister s17 = { 17 };
-SwVfpRegister s18 = { 18 };
-SwVfpRegister s19 = { 19 };
-SwVfpRegister s20 = { 20 };
-SwVfpRegister s21 = { 21 };
-SwVfpRegister s22 = { 22 };
-SwVfpRegister s23 = { 23 };
-SwVfpRegister s24 = { 24 };
-SwVfpRegister s25 = { 25 };
-SwVfpRegister s26 = { 26 };
-SwVfpRegister s27 = { 27 };
-SwVfpRegister s28 = { 28 };
-SwVfpRegister s29 = { 29 };
-SwVfpRegister s30 = { 30 };
-SwVfpRegister s31 = { 31 };
-
-DwVfpRegister d0  = {  0 };
-DwVfpRegister d1  = {  1 };
-DwVfpRegister d2  = {  2 };
-DwVfpRegister d3  = {  3 };
-DwVfpRegister d4  = {  4 };
-DwVfpRegister d5  = {  5 };
-DwVfpRegister d6  = {  6 };
-DwVfpRegister d7  = {  7 };
-DwVfpRegister d8  = {  8 };
-DwVfpRegister d9  = {  9 };
-DwVfpRegister d10 = { 10 };
-DwVfpRegister d11 = { 11 };
-DwVfpRegister d12 = { 12 };
-DwVfpRegister d13 = { 13 };
-DwVfpRegister d14 = { 14 };
-DwVfpRegister d15 = { 15 };
-
-// -----------------------------------------------------------------------------
-// Implementation of RelocInfo
-
-const int RelocInfo::kApplyMask = 0;
-
-
-void RelocInfo::PatchCode(byte* instructions, int instruction_count) {
-  // Patch the code at the current address with the supplied instructions.
-  Instr* pc = reinterpret_cast<Instr*>(pc_);
-  Instr* instr = reinterpret_cast<Instr*>(instructions);
-  for (int i = 0; i < instruction_count; i++) {
-    *(pc + i) = *(instr + i);
-  }
-
-  // Indicate that code has changed.
-  CPU::FlushICache(pc_, instruction_count * Assembler::kInstrSize);
-}
-
-
-// Patch the code at the current PC with a call to the target address.
-// Additional guard instructions can be added if required.
-void RelocInfo::PatchCodeWithCall(Address target, int guard_bytes) {
-  // Patch the code at the current address with a call to the target.
-  UNIMPLEMENTED();
-}
-
-
-// -----------------------------------------------------------------------------
-// Implementation of Operand and MemOperand
-// See assembler-arm-inl.h for inlined constructors
-
-Operand::Operand(Handle<Object> handle) {
-  rm_ = no_reg;
-  // Verify all Objects referred by code are NOT in new space.
-  Object* obj = *handle;
-  ASSERT(!Heap::InNewSpace(obj));
-  if (obj->IsHeapObject()) {
-    imm32_ = reinterpret_cast<intptr_t>(handle.location());
-    rmode_ = RelocInfo::EMBEDDED_OBJECT;
-  } else {
-    // no relocation needed
-    imm32_ =  reinterpret_cast<intptr_t>(obj);
-    rmode_ = RelocInfo::NONE;
-  }
-}
-
-
-Operand::Operand(Register rm, ShiftOp shift_op, int shift_imm) {
-  ASSERT(is_uint5(shift_imm));
-  ASSERT(shift_op != ROR || shift_imm != 0);  // use RRX if you mean it
-  rm_ = rm;
-  rs_ = no_reg;
-  shift_op_ = shift_op;
-  shift_imm_ = shift_imm & 31;
-  if (shift_op == RRX) {
-    // encoded as ROR with shift_imm == 0
-    ASSERT(shift_imm == 0);
-    shift_op_ = ROR;
-    shift_imm_ = 0;
-  }
-}
-
-
-Operand::Operand(Register rm, ShiftOp shift_op, Register rs) {
-  ASSERT(shift_op != RRX);
-  rm_ = rm;
-  rs_ = no_reg;
-  shift_op_ = shift_op;
-  rs_ = rs;
-}
-
-
-MemOperand::MemOperand(Register rn, int32_t offset, AddrMode am) {
-  rn_ = rn;
-  rm_ = no_reg;
-  offset_ = offset;
-  am_ = am;
-}
-
-MemOperand::MemOperand(Register rn, Register rm, AddrMode am) {
-  rn_ = rn;
-  rm_ = rm;
-  shift_op_ = LSL;
-  shift_imm_ = 0;
-  am_ = am;
-}
-
-
-MemOperand::MemOperand(Register rn, Register rm,
-                       ShiftOp shift_op, int shift_imm, AddrMode am) {
-  ASSERT(is_uint5(shift_imm));
-  rn_ = rn;
-  rm_ = rm;
-  shift_op_ = shift_op;
-  shift_imm_ = shift_imm & 31;
-  am_ = am;
-}
-
-
-// -----------------------------------------------------------------------------
-// Implementation of Assembler
-
-// Instruction encoding bits
-enum {
-  H   = 1 << 5,   // halfword (or byte)
-  S6  = 1 << 6,   // signed (or unsigned)
-  L   = 1 << 20,  // load (or store)
-  S   = 1 << 20,  // set condition code (or leave unchanged)
-  W   = 1 << 21,  // writeback base register (or leave unchanged)
-  A   = 1 << 21,  // accumulate in multiply instruction (or not)
-  B   = 1 << 22,  // unsigned byte (or word)
-  N   = 1 << 22,  // long (or short)
-  U   = 1 << 23,  // positive (or negative) offset/index
-  P   = 1 << 24,  // offset/pre-indexed addressing (or post-indexed addressing)
-  I   = 1 << 25,  // immediate shifter operand (or not)
-
-  B4  = 1 << 4,
-  B5  = 1 << 5,
-  B6  = 1 << 6,
-  B7  = 1 << 7,
-  B8  = 1 << 8,
-  B9  = 1 << 9,
-  B12 = 1 << 12,
-  B16 = 1 << 16,
-  B18 = 1 << 18,
-  B19 = 1 << 19,
-  B20 = 1 << 20,
-  B21 = 1 << 21,
-  B22 = 1 << 22,
-  B23 = 1 << 23,
-  B24 = 1 << 24,
-  B25 = 1 << 25,
-  B26 = 1 << 26,
-  B27 = 1 << 27,
-
-  // Instruction bit masks
-  RdMask     = 15 << 12,  // in str instruction
-  CondMask   = 15 << 28,
-  CoprocessorMask = 15 << 8,
-  OpCodeMask = 15 << 21,  // in data-processing instructions
-  Imm24Mask  = (1 << 24) - 1,
-  Off12Mask  = (1 << 12) - 1,
-  // Reserved condition
-  nv = 15 << 28
-};
-
-
-// add(sp, sp, 4) instruction (aka Pop())
-static const Instr kPopInstruction =
-    al | 4 * B21 | 4 | LeaveCC | I | sp.code() * B16 | sp.code() * B12;
-// str(r, MemOperand(sp, 4, NegPreIndex), al) instruction (aka push(r))
-// register r is not encoded.
-static const Instr kPushRegPattern =
-    al | B26 | 4 | NegPreIndex | sp.code() * B16;
-// ldr(r, MemOperand(sp, 4, PostIndex), al) instruction (aka pop(r))
-// register r is not encoded.
-static const Instr kPopRegPattern =
-    al | B26 | L | 4 | PostIndex | sp.code() * B16;
-// mov lr, pc
-const Instr kMovLrPc = al | 13*B21 | pc.code() | lr.code() * B12;
-// ldr pc, [pc, #XXX]
-const Instr kLdrPCPattern = al | B26 | L | pc.code() * B16;
-
-// spare_buffer_
-static const int kMinimalBufferSize = 4*KB;
-static byte* spare_buffer_ = NULL;
-
-Assembler::Assembler(void* buffer, int buffer_size) {
-  if (buffer == NULL) {
-    // do our own buffer management
-    if (buffer_size <= kMinimalBufferSize) {
-      buffer_size = kMinimalBufferSize;
-
-      if (spare_buffer_ != NULL) {
-        buffer = spare_buffer_;
-        spare_buffer_ = NULL;
-      }
-    }
-    if (buffer == NULL) {
-      buffer_ = NewArray<byte>(buffer_size);
-    } else {
-      buffer_ = static_cast<byte*>(buffer);
-    }
-    buffer_size_ = buffer_size;
-    own_buffer_ = true;
-
-  } else {
-    // use externally provided buffer instead
-    ASSERT(buffer_size > 0);
-    buffer_ = static_cast<byte*>(buffer);
-    buffer_size_ = buffer_size;
-    own_buffer_ = false;
-  }
-
-  // setup buffer pointers
-  ASSERT(buffer_ != NULL);
-  pc_ = buffer_;
-  reloc_info_writer.Reposition(buffer_ + buffer_size, pc_);
-  num_prinfo_ = 0;
-  next_buffer_check_ = 0;
-  no_const_pool_before_ = 0;
-  last_const_pool_end_ = 0;
-  last_bound_pos_ = 0;
-  current_statement_position_ = RelocInfo::kNoPosition;
-  current_position_ = RelocInfo::kNoPosition;
-  written_statement_position_ = current_statement_position_;
-  written_position_ = current_position_;
-}
-
-
-Assembler::~Assembler() {
-  if (own_buffer_) {
-    if (spare_buffer_ == NULL && buffer_size_ == kMinimalBufferSize) {
-      spare_buffer_ = buffer_;
-    } else {
-      DeleteArray(buffer_);
-    }
-  }
-}
-
-
-void Assembler::GetCode(CodeDesc* desc) {
-  // emit constant pool if necessary
-  CheckConstPool(true, false);
-  ASSERT(num_prinfo_ == 0);
-
-  // setup desc
-  desc->buffer = buffer_;
-  desc->buffer_size = buffer_size_;
-  desc->instr_size = pc_offset();
-  desc->reloc_size = (buffer_ + buffer_size_) - reloc_info_writer.pos();
-}
-
-
-void Assembler::Align(int m) {
-  ASSERT(m >= 4 && IsPowerOf2(m));
-  while ((pc_offset() & (m - 1)) != 0) {
-    nop();
-  }
-}
-
-
-// Labels refer to positions in the (to be) generated code.
-// There are bound, linked, and unused labels.
-//
-// Bound labels refer to known positions in the already
-// generated code. pos() is the position the label refers to.
-//
-// Linked labels refer to unknown positions in the code
-// to be generated; pos() is the position of the last
-// instruction using the label.
-
-
-// The link chain is terminated by a negative code position (must be aligned)
-const int kEndOfChain = -4;
-
-
-int Assembler::target_at(int pos)  {
-  Instr instr = instr_at(pos);
-  if ((instr & ~Imm24Mask) == 0) {
-    // Emitted label constant, not part of a branch.
-    return instr - (Code::kHeaderSize - kHeapObjectTag);
-  }
-  ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx imm24
-  int imm26 = ((instr & Imm24Mask) << 8) >> 6;
-  if ((instr & CondMask) == nv && (instr & B24) != 0)
-    // blx uses bit 24 to encode bit 2 of imm26
-    imm26 += 2;
-
-  return pos + kPcLoadDelta + imm26;
-}
-
-
-void Assembler::target_at_put(int pos, int target_pos) {
-  Instr instr = instr_at(pos);
-  if ((instr & ~Imm24Mask) == 0) {
-    ASSERT(target_pos == kEndOfChain || target_pos >= 0);
-    // Emitted label constant, not part of a branch.
-    // Make label relative to Code* of generated Code object.
-    instr_at_put(pos, target_pos + (Code::kHeaderSize - kHeapObjectTag));
-    return;
-  }
-  int imm26 = target_pos - (pos + kPcLoadDelta);
-  ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx imm24
-  if ((instr & CondMask) == nv) {
-    // blx uses bit 24 to encode bit 2 of imm26
-    ASSERT((imm26 & 1) == 0);
-    instr = (instr & ~(B24 | Imm24Mask)) | ((imm26 & 2) >> 1)*B24;
-  } else {
-    ASSERT((imm26 & 3) == 0);
-    instr &= ~Imm24Mask;
-  }
-  int imm24 = imm26 >> 2;
-  ASSERT(is_int24(imm24));
-  instr_at_put(pos, instr | (imm24 & Imm24Mask));
-}
-
-
-void Assembler::print(Label* L) {
-  if (L->is_unused()) {
-    PrintF("unused label\n");
-  } else if (L->is_bound()) {
-    PrintF("bound label to %d\n", L->pos());
-  } else if (L->is_linked()) {
-    Label l = *L;
-    PrintF("unbound label");
-    while (l.is_linked()) {
-      PrintF("@ %d ", l.pos());
-      Instr instr = instr_at(l.pos());
-      if ((instr & ~Imm24Mask) == 0) {
-        PrintF("value\n");
-      } else {
-        ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx
-        int cond = instr & CondMask;
-        const char* b;
-        const char* c;
-        if (cond == nv) {
-          b = "blx";
-          c = "";
-        } else {
-          if ((instr & B24) != 0)
-            b = "bl";
-          else
-            b = "b";
-
-          switch (cond) {
-            case eq: c = "eq"; break;
-            case ne: c = "ne"; break;
-            case hs: c = "hs"; break;
-            case lo: c = "lo"; break;
-            case mi: c = "mi"; break;
-            case pl: c = "pl"; break;
-            case vs: c = "vs"; break;
-            case vc: c = "vc"; break;
-            case hi: c = "hi"; break;
-            case ls: c = "ls"; break;
-            case ge: c = "ge"; break;
-            case lt: c = "lt"; break;
-            case gt: c = "gt"; break;
-            case le: c = "le"; break;
-            case al: c = ""; break;
-            default:
-              c = "";
-              UNREACHABLE();
-          }
-        }
-        PrintF("%s%s\n", b, c);
-      }
-      next(&l);
-    }
-  } else {
-    PrintF("label in inconsistent state (pos = %d)\n", L->pos_);
-  }
-}
-
-
-void Assembler::bind_to(Label* L, int pos) {
-  ASSERT(0 <= pos && pos <= pc_offset());  // must have a valid binding position
-  while (L->is_linked()) {
-    int fixup_pos = L->pos();
-    next(L);  // call next before overwriting link with target at fixup_pos
-    target_at_put(fixup_pos, pos);
-  }
-  L->bind_to(pos);
-
-  // Keep track of the last bound label so we don't eliminate any instructions
-  // before a bound label.
-  if (pos > last_bound_pos_)
-    last_bound_pos_ = pos;
-}
-
-
-void Assembler::link_to(Label* L, Label* appendix) {
-  if (appendix->is_linked()) {
-    if (L->is_linked()) {
-      // append appendix to L's list
-      int fixup_pos;
-      int link = L->pos();
-      do {
-        fixup_pos = link;
-        link = target_at(fixup_pos);
-      } while (link > 0);
-      ASSERT(link == kEndOfChain);
-      target_at_put(fixup_pos, appendix->pos());
-    } else {
-      // L is empty, simply use appendix
-      *L = *appendix;
-    }
-  }
-  appendix->Unuse();  // appendix should not be used anymore
-}
-
-
-void Assembler::bind(Label* L) {
-  ASSERT(!L->is_bound());  // label can only be bound once
-  bind_to(L, pc_offset());
-}
-
-
-void Assembler::next(Label* L) {
-  ASSERT(L->is_linked());
-  int link = target_at(L->pos());
-  if (link > 0) {
-    L->link_to(link);
-  } else {
-    ASSERT(link == kEndOfChain);
-    L->Unuse();
-  }
-}
-
-
-// Low-level code emission routines depending on the addressing mode
-static bool fits_shifter(uint32_t imm32,
-                         uint32_t* rotate_imm,
-                         uint32_t* immed_8,
-                         Instr* instr) {
-  // imm32 must be unsigned
-  for (int rot = 0; rot < 16; rot++) {
-    uint32_t imm8 = (imm32 << 2*rot) | (imm32 >> (32 - 2*rot));
-    if ((imm8 <= 0xff)) {
-      *rotate_imm = rot;
-      *immed_8 = imm8;
-      return true;
-    }
-  }
-  // if the opcode is mov or mvn and if ~imm32 fits, change the opcode
-  if (instr != NULL && (*instr & 0xd*B21) == 0xd*B21) {
-    if (fits_shifter(~imm32, rotate_imm, immed_8, NULL)) {
-      *instr ^= 0x2*B21;
-      return true;
-    }
-  }
-  return false;
-}
-
-
-// We have to use the temporary register for things that can be relocated even
-// if they can be encoded in the ARM's 12 bits of immediate-offset instruction
-// space.  There is no guarantee that the relocated location can be similarly
-// encoded.
-static bool MustUseIp(RelocInfo::Mode rmode) {
-  if (rmode == RelocInfo::EXTERNAL_REFERENCE) {
-#ifdef DEBUG
-    if (!Serializer::enabled()) {
-      Serializer::TooLateToEnableNow();
-    }
-#endif
-    return Serializer::enabled();
-  } else if (rmode == RelocInfo::NONE) {
-    return false;
-  }
-  return true;
-}
-
-
-void Assembler::addrmod1(Instr instr,
-                         Register rn,
-                         Register rd,
-                         const Operand& x) {
-  CheckBuffer();
-  ASSERT((instr & ~(CondMask | OpCodeMask | S)) == 0);
-  if (!x.rm_.is_valid()) {
-    // immediate
-    uint32_t rotate_imm;
-    uint32_t immed_8;
-    if (MustUseIp(x.rmode_) ||
-        !fits_shifter(x.imm32_, &rotate_imm, &immed_8, &instr)) {
-      // The immediate operand cannot be encoded as a shifter operand, so load
-      // it first to register ip and change the original instruction to use ip.
-      // However, if the original instruction is a 'mov rd, x' (not setting the
-      // condition code), then replace it with a 'ldr rd, [pc]'
-      RecordRelocInfo(x.rmode_, x.imm32_);
-      CHECK(!rn.is(ip));  // rn should never be ip, or will be trashed
-      Condition cond = static_cast<Condition>(instr & CondMask);
-      if ((instr & ~CondMask) == 13*B21) {  // mov, S not set
-        ldr(rd, MemOperand(pc, 0), cond);
-      } else {
-        ldr(ip, MemOperand(pc, 0), cond);
-        addrmod1(instr, rn, rd, Operand(ip));
-      }
-      return;
-    }
-    instr |= I | rotate_imm*B8 | immed_8;
-  } else if (!x.rs_.is_valid()) {
-    // immediate shift
-    instr |= x.shift_imm_*B7 | x.shift_op_ | x.rm_.code();
-  } else {
-    // register shift
-    ASSERT(!rn.is(pc) && !rd.is(pc) && !x.rm_.is(pc) && !x.rs_.is(pc));
-    instr |= x.rs_.code()*B8 | x.shift_op_ | B4 | x.rm_.code();
-  }
-  emit(instr | rn.code()*B16 | rd.code()*B12);
-  if (rn.is(pc) || x.rm_.is(pc))
-    // block constant pool emission for one instruction after reading pc
-    BlockConstPoolBefore(pc_offset() + kInstrSize);
-}
-
-
-void Assembler::addrmod2(Instr instr, Register rd, const MemOperand& x) {
-  ASSERT((instr & ~(CondMask | B | L)) == B26);
-  int am = x.am_;
-  if (!x.rm_.is_valid()) {
-    // immediate offset
-    int offset_12 = x.offset_;
-    if (offset_12 < 0) {
-      offset_12 = -offset_12;
-      am ^= U;
-    }
-    if (!is_uint12(offset_12)) {
-      // immediate offset cannot be encoded, load it first to register ip
-      // rn (and rd in a load) should never be ip, or will be trashed
-      ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
-      mov(ip, Operand(x.offset_), LeaveCC,
-          static_cast<Condition>(instr & CondMask));
-      addrmod2(instr, rd, MemOperand(x.rn_, ip, x.am_));
-      return;
-    }
-    ASSERT(offset_12 >= 0);  // no masking needed
-    instr |= offset_12;
-  } else {
-    // register offset (shift_imm_ and shift_op_ are 0) or scaled
-    // register offset the constructors make sure than both shift_imm_
-    // and shift_op_ are initialized
-    ASSERT(!x.rm_.is(pc));
-    instr |= B25 | x.shift_imm_*B7 | x.shift_op_ | x.rm_.code();
-  }
-  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
-  emit(instr | am | x.rn_.code()*B16 | rd.code()*B12);
-}
-
-
-void Assembler::addrmod3(Instr instr, Register rd, const MemOperand& x) {
-  ASSERT((instr & ~(CondMask | L | S6 | H)) == (B4 | B7));
-  ASSERT(x.rn_.is_valid());
-  int am = x.am_;
-  if (!x.rm_.is_valid()) {
-    // immediate offset
-    int offset_8 = x.offset_;
-    if (offset_8 < 0) {
-      offset_8 = -offset_8;
-      am ^= U;
-    }
-    if (!is_uint8(offset_8)) {
-      // immediate offset cannot be encoded, load it first to register ip
-      // rn (and rd in a load) should never be ip, or will be trashed
-      ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
-      mov(ip, Operand(x.offset_), LeaveCC,
-          static_cast<Condition>(instr & CondMask));
-      addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
-      return;
-    }
-    ASSERT(offset_8 >= 0);  // no masking needed
-    instr |= B | (offset_8 >> 4)*B8 | (offset_8 & 0xf);
-  } else if (x.shift_imm_ != 0) {
-    // scaled register offset not supported, load index first
-    // rn (and rd in a load) should never be ip, or will be trashed
-    ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
-    mov(ip, Operand(x.rm_, x.shift_op_, x.shift_imm_), LeaveCC,
-        static_cast<Condition>(instr & CondMask));
-    addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
-    return;
-  } else {
-    // register offset
-    ASSERT((am & (P|W)) == P || !x.rm_.is(pc));  // no pc index with writeback
-    instr |= x.rm_.code();
-  }
-  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
-  emit(instr | am | x.rn_.code()*B16 | rd.code()*B12);
-}
-
-
-void Assembler::addrmod4(Instr instr, Register rn, RegList rl) {
-  ASSERT((instr & ~(CondMask | P | U | W | L)) == B27);
-  ASSERT(rl != 0);
-  ASSERT(!rn.is(pc));
-  emit(instr | rn.code()*B16 | rl);
-}
-
-
-void Assembler::addrmod5(Instr instr, CRegister crd, const MemOperand& x) {
-  // unindexed addressing is not encoded by this function
-  ASSERT_EQ((B27 | B26),
-            (instr & ~(CondMask | CoprocessorMask | P | U | N | W | L)));
-  ASSERT(x.rn_.is_valid() && !x.rm_.is_valid());
-  int am = x.am_;
-  int offset_8 = x.offset_;
-  ASSERT((offset_8 & 3) == 0);  // offset must be an aligned word offset
-  offset_8 >>= 2;
-  if (offset_8 < 0) {
-    offset_8 = -offset_8;
-    am ^= U;
-  }
-  ASSERT(is_uint8(offset_8));  // unsigned word offset must fit in a byte
-  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
-
-  // post-indexed addressing requires W == 1; different than in addrmod2/3
-  if ((am & P) == 0)
-    am |= W;
-
-  ASSERT(offset_8 >= 0);  // no masking needed
-  emit(instr | am | x.rn_.code()*B16 | crd.code()*B12 | offset_8);
-}
-
-
-int Assembler::branch_offset(Label* L, bool jump_elimination_allowed) {
-  int target_pos;
-  if (L->is_bound()) {
-    target_pos = L->pos();
-  } else {
-    if (L->is_linked()) {
-      target_pos = L->pos();  // L's link
-    } else {
-      target_pos = kEndOfChain;
-    }
-    L->link_to(pc_offset());
-  }
-
-  // Block the emission of the constant pool, since the branch instruction must
-  // be emitted at the pc offset recorded by the label
-  BlockConstPoolBefore(pc_offset() + kInstrSize);
-  return target_pos - (pc_offset() + kPcLoadDelta);
-}
-
-
-void Assembler::label_at_put(Label* L, int at_offset) {
-  int target_pos;
-  if (L->is_bound()) {
-    target_pos = L->pos();
-  } else {
-    if (L->is_linked()) {
-      target_pos = L->pos();  // L's link
-    } else {
-      target_pos = kEndOfChain;
-    }
-    L->link_to(at_offset);
-    instr_at_put(at_offset, target_pos + (Code::kHeaderSize - kHeapObjectTag));
-  }
-}
-
-
-// Branch instructions
-void Assembler::b(int branch_offset, Condition cond) {
-  ASSERT((branch_offset & 3) == 0);
-  int imm24 = branch_offset >> 2;
-  ASSERT(is_int24(imm24));
-  emit(cond | B27 | B25 | (imm24 & Imm24Mask));
-
-  if (cond == al)
-    // dead code is a good location to emit the constant pool
-    CheckConstPool(false, false);
-}
-
-
-void Assembler::bl(int branch_offset, Condition cond) {
-  ASSERT((branch_offset & 3) == 0);
-  int imm24 = branch_offset >> 2;
-  ASSERT(is_int24(imm24));
-  emit(cond | B27 | B25 | B24 | (imm24 & Imm24Mask));
-}
-
-
-void Assembler::blx(int branch_offset) {  // v5 and above
-  WriteRecordedPositions();
-  ASSERT((branch_offset & 1) == 0);
-  int h = ((branch_offset & 2) >> 1)*B24;
-  int imm24 = branch_offset >> 2;
-  ASSERT(is_int24(imm24));
-  emit(15 << 28 | B27 | B25 | h | (imm24 & Imm24Mask));
-}
-
-
-void Assembler::blx(Register target, Condition cond) {  // v5 and above
-  WriteRecordedPositions();
-  ASSERT(!target.is(pc));
-  emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | 3*B4 | target.code());
-}
-
-
-void Assembler::bx(Register target, Condition cond) {  // v5 and above, plus v4t
-  WriteRecordedPositions();
-  ASSERT(!target.is(pc));  // use of pc is actually allowed, but discouraged
-  emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | B4 | target.code());
-}
-
-
-// Data-processing instructions
-void Assembler::and_(Register dst, Register src1, const Operand& src2,
-                     SBit s, Condition cond) {
-  addrmod1(cond | 0*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::eor(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 1*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::sub(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 2*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::rsb(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 3*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::add(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 4*B21 | s, src1, dst, src2);
-
-  // Eliminate pattern: push(r), pop()
-  //   str(src, MemOperand(sp, 4, NegPreIndex), al);
-  //   add(sp, sp, Operand(kPointerSize));
-  // Both instructions can be eliminated.
-  int pattern_size = 2 * kInstrSize;
-  if (FLAG_push_pop_elimination &&
-      last_bound_pos_ <= (pc_offset() - pattern_size) &&
-      reloc_info_writer.last_pc() <= (pc_ - pattern_size) &&
-      // pattern
-      instr_at(pc_ - 1 * kInstrSize) == kPopInstruction &&
-      (instr_at(pc_ - 2 * kInstrSize) & ~RdMask) == kPushRegPattern) {
-    pc_ -= 2 * kInstrSize;
-    if (FLAG_print_push_pop_elimination) {
-      PrintF("%x push(reg)/pop() eliminated\n", pc_offset());
-    }
-  }
-}
-
-
-void Assembler::adc(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 5*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::sbc(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 6*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::rsc(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 7*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::tst(Register src1, const Operand& src2, Condition cond) {
-  addrmod1(cond | 8*B21 | S, src1, r0, src2);
-}
-
-
-void Assembler::teq(Register src1, const Operand& src2, Condition cond) {
-  addrmod1(cond | 9*B21 | S, src1, r0, src2);
-}
-
-
-void Assembler::cmp(Register src1, const Operand& src2, Condition cond) {
-  addrmod1(cond | 10*B21 | S, src1, r0, src2);
-}
-
-
-void Assembler::cmn(Register src1, const Operand& src2, Condition cond) {
-  addrmod1(cond | 11*B21 | S, src1, r0, src2);
-}
-
-
-void Assembler::orr(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 12*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::mov(Register dst, const Operand& src, SBit s, Condition cond) {
-  if (dst.is(pc)) {
-    WriteRecordedPositions();
-  }
-  addrmod1(cond | 13*B21 | s, r0, dst, src);
-}
-
-
-void Assembler::bic(Register dst, Register src1, const Operand& src2,
-                    SBit s, Condition cond) {
-  addrmod1(cond | 14*B21 | s, src1, dst, src2);
-}
-
-
-void Assembler::mvn(Register dst, const Operand& src, SBit s, Condition cond) {
-  addrmod1(cond | 15*B21 | s, r0, dst, src);
-}
-
-
-// Multiply instructions
-void Assembler::mla(Register dst, Register src1, Register src2, Register srcA,
-                    SBit s, Condition cond) {
-  ASSERT(!dst.is(pc) && !src1.is(pc) && !src2.is(pc) && !srcA.is(pc));
-  emit(cond | A | s | dst.code()*B16 | srcA.code()*B12 |
-       src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-void Assembler::mul(Register dst, Register src1, Register src2,
-                    SBit s, Condition cond) {
-  ASSERT(!dst.is(pc) && !src1.is(pc) && !src2.is(pc));
-  // dst goes in bits 16-19 for this instruction!
-  emit(cond | s | dst.code()*B16 | src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-void Assembler::smlal(Register dstL,
-                      Register dstH,
-                      Register src1,
-                      Register src2,
-                      SBit s,
-                      Condition cond) {
-  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
-  ASSERT(!dstL.is(dstH));
-  emit(cond | B23 | B22 | A | s | dstH.code()*B16 | dstL.code()*B12 |
-       src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-void Assembler::smull(Register dstL,
-                      Register dstH,
-                      Register src1,
-                      Register src2,
-                      SBit s,
-                      Condition cond) {
-  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
-  ASSERT(!dstL.is(dstH));
-  emit(cond | B23 | B22 | s | dstH.code()*B16 | dstL.code()*B12 |
-       src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-void Assembler::umlal(Register dstL,
-                      Register dstH,
-                      Register src1,
-                      Register src2,
-                      SBit s,
-                      Condition cond) {
-  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
-  ASSERT(!dstL.is(dstH));
-  emit(cond | B23 | A | s | dstH.code()*B16 | dstL.code()*B12 |
-       src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-void Assembler::umull(Register dstL,
-                      Register dstH,
-                      Register src1,
-                      Register src2,
-                      SBit s,
-                      Condition cond) {
-  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
-  ASSERT(!dstL.is(dstH));
-  emit(cond | B23 | s | dstH.code()*B16 | dstL.code()*B12 |
-       src2.code()*B8 | B7 | B4 | src1.code());
-}
-
-
-// Miscellaneous arithmetic instructions
-void Assembler::clz(Register dst, Register src, Condition cond) {
-  // v5 and above.
-  ASSERT(!dst.is(pc) && !src.is(pc));
-  emit(cond | B24 | B22 | B21 | 15*B16 | dst.code()*B12 |
-       15*B8 | B4 | src.code());
-}
-
-
-// Status register access instructions
-void Assembler::mrs(Register dst, SRegister s, Condition cond) {
-  ASSERT(!dst.is(pc));
-  emit(cond | B24 | s | 15*B16 | dst.code()*B12);
-}
-
-
-void Assembler::msr(SRegisterFieldMask fields, const Operand& src,
-                    Condition cond) {
-  ASSERT(fields >= B16 && fields < B20);  // at least one field set
-  Instr instr;
-  if (!src.rm_.is_valid()) {
-    // immediate
-    uint32_t rotate_imm;
-    uint32_t immed_8;
-    if (MustUseIp(src.rmode_) ||
-        !fits_shifter(src.imm32_, &rotate_imm, &immed_8, NULL)) {
-      // immediate operand cannot be encoded, load it first to register ip
-      RecordRelocInfo(src.rmode_, src.imm32_);
-      ldr(ip, MemOperand(pc, 0), cond);
-      msr(fields, Operand(ip), cond);
-      return;
-    }
-    instr = I | rotate_imm*B8 | immed_8;
-  } else {
-    ASSERT(!src.rs_.is_valid() && src.shift_imm_ == 0);  // only rm allowed
-    instr = src.rm_.code();
-  }
-  emit(cond | instr | B24 | B21 | fields | 15*B12);
-}
-
-
-// Load/Store instructions
-void Assembler::ldr(Register dst, const MemOperand& src, Condition cond) {
-  if (dst.is(pc)) {
-    WriteRecordedPositions();
-  }
-  addrmod2(cond | B26 | L, dst, src);
-
-  // Eliminate pattern: push(r), pop(r)
-  //   str(r, MemOperand(sp, 4, NegPreIndex), al)
-  //   ldr(r, MemOperand(sp, 4, PostIndex), al)
-  // Both instructions can be eliminated.
-  int pattern_size = 2 * kInstrSize;
-  if (FLAG_push_pop_elimination &&
-      last_bound_pos_ <= (pc_offset() - pattern_size) &&
-      reloc_info_writer.last_pc() <= (pc_ - pattern_size) &&
-      // pattern
-      instr_at(pc_ - 1 * kInstrSize) == (kPopRegPattern | dst.code() * B12) &&
-      instr_at(pc_ - 2 * kInstrSize) == (kPushRegPattern | dst.code() * B12)) {
-    pc_ -= 2 * kInstrSize;
-    if (FLAG_print_push_pop_elimination) {
-      PrintF("%x push/pop (same reg) eliminated\n", pc_offset());
-    }
-  }
-}
-
-
-void Assembler::str(Register src, const MemOperand& dst, Condition cond) {
-  addrmod2(cond | B26, src, dst);
-
-  // Eliminate pattern: pop(), push(r)
-  //     add sp, sp, #4 LeaveCC, al; str r, [sp, #-4], al
-  // ->  str r, [sp, 0], al
-  int pattern_size = 2 * kInstrSize;
-  if (FLAG_push_pop_elimination &&
-     last_bound_pos_ <= (pc_offset() - pattern_size) &&
-     reloc_info_writer.last_pc() <= (pc_ - pattern_size) &&
-     instr_at(pc_ - 1 * kInstrSize) == (kPushRegPattern | src.code() * B12) &&
-     instr_at(pc_ - 2 * kInstrSize) == kPopInstruction) {
-    pc_ -= 2 * kInstrSize;
-    emit(al | B26 | 0 | Offset | sp.code() * B16 | src.code() * B12);
-    if (FLAG_print_push_pop_elimination) {
-      PrintF("%x pop()/push(reg) eliminated\n", pc_offset());
-    }
-  }
-}
-
-
-void Assembler::ldrb(Register dst, const MemOperand& src, Condition cond) {
-  addrmod2(cond | B26 | B | L, dst, src);
-}
-
-
-void Assembler::strb(Register src, const MemOperand& dst, Condition cond) {
-  addrmod2(cond | B26 | B, src, dst);
-}
-
-
-void Assembler::ldrh(Register dst, const MemOperand& src, Condition cond) {
-  addrmod3(cond | L | B7 | H | B4, dst, src);
-}
-
-
-void Assembler::strh(Register src, const MemOperand& dst, Condition cond) {
-  addrmod3(cond | B7 | H | B4, src, dst);
-}
-
-
-void Assembler::ldrsb(Register dst, const MemOperand& src, Condition cond) {
-  addrmod3(cond | L | B7 | S6 | B4, dst, src);
-}
-
-
-void Assembler::ldrsh(Register dst, const MemOperand& src, Condition cond) {
-  addrmod3(cond | L | B7 | S6 | H | B4, dst, src);
-}
-
-
-// Load/Store multiple instructions
-void Assembler::ldm(BlockAddrMode am,
-                    Register base,
-                    RegList dst,
-                    Condition cond) {
-  // ABI stack constraint: ldmxx base, {..sp..}  base != sp  is not restartable
-  ASSERT(base.is(sp) || (dst & sp.bit()) == 0);
-
-  addrmod4(cond | B27 | am | L, base, dst);
-
-  // emit the constant pool after a function return implemented by ldm ..{..pc}
-  if (cond == al && (dst & pc.bit()) != 0) {
-    // There is a slight chance that the ldm instruction was actually a call,
-    // in which case it would be wrong to return into the constant pool; we
-    // recognize this case by checking if the emission of the pool was blocked
-    // at the pc of the ldm instruction by a mov lr, pc instruction; if this is
-    // the case, we emit a jump over the pool.
-    CheckConstPool(true, no_const_pool_before_ == pc_offset() - kInstrSize);
-  }
-}
-
-
-void Assembler::stm(BlockAddrMode am,
-                    Register base,
-                    RegList src,
-                    Condition cond) {
-  addrmod4(cond | B27 | am, base, src);
-}
-
-
-// Semaphore instructions
-void Assembler::swp(Register dst, Register src, Register base, Condition cond) {
-  ASSERT(!dst.is(pc) && !src.is(pc) && !base.is(pc));
-  ASSERT(!dst.is(base) && !src.is(base));
-  emit(cond | P | base.code()*B16 | dst.code()*B12 |
-       B7 | B4 | src.code());
-}
-
-
-void Assembler::swpb(Register dst,
-                     Register src,
-                     Register base,
-                     Condition cond) {
-  ASSERT(!dst.is(pc) && !src.is(pc) && !base.is(pc));
-  ASSERT(!dst.is(base) && !src.is(base));
-  emit(cond | P | B | base.code()*B16 | dst.code()*B12 |
-       B7 | B4 | src.code());
-}
-
-
-// Exception-generating instructions and debugging support
-void Assembler::stop(const char* msg) {
-#if !defined(__arm__)
-  // The simulator handles these special instructions and stops execution.
-  emit(15 << 28 | ((intptr_t) msg));
-#else
-  // Just issue a simple break instruction for now. Alternatively we could use
-  // the swi(0x9f0001) instruction on Linux.
-  bkpt(0);
-#endif
-}
-
-
-void Assembler::bkpt(uint32_t imm16) {  // v5 and above
-  ASSERT(is_uint16(imm16));
-  emit(al | B24 | B21 | (imm16 >> 4)*B8 | 7*B4 | (imm16 & 0xf));
-}
-
-
-void Assembler::swi(uint32_t imm24, Condition cond) {
-  ASSERT(is_uint24(imm24));
-  emit(cond | 15*B24 | imm24);
-}
-
-
-// Coprocessor instructions
-void Assembler::cdp(Coprocessor coproc,
-                    int opcode_1,
-                    CRegister crd,
-                    CRegister crn,
-                    CRegister crm,
-                    int opcode_2,
-                    Condition cond) {
-  ASSERT(is_uint4(opcode_1) && is_uint3(opcode_2));
-  emit(cond | B27 | B26 | B25 | (opcode_1 & 15)*B20 | crn.code()*B16 |
-       crd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | crm.code());
-}
-
-
-void Assembler::cdp2(Coprocessor coproc,
-                     int opcode_1,
-                     CRegister crd,
-                     CRegister crn,
-                     CRegister crm,
-                     int opcode_2) {  // v5 and above
-  cdp(coproc, opcode_1, crd, crn, crm, opcode_2, static_cast<Condition>(nv));
-}
-
-
-void Assembler::mcr(Coprocessor coproc,
-                    int opcode_1,
-                    Register rd,
-                    CRegister crn,
-                    CRegister crm,
-                    int opcode_2,
-                    Condition cond) {
-  ASSERT(is_uint3(opcode_1) && is_uint3(opcode_2));
-  emit(cond | B27 | B26 | B25 | (opcode_1 & 7)*B21 | crn.code()*B16 |
-       rd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | B4 | crm.code());
-}
-
-
-void Assembler::mcr2(Coprocessor coproc,
-                     int opcode_1,
-                     Register rd,
-                     CRegister crn,
-                     CRegister crm,
-                     int opcode_2) {  // v5 and above
-  mcr(coproc, opcode_1, rd, crn, crm, opcode_2, static_cast<Condition>(nv));
-}
-
-
-void Assembler::mrc(Coprocessor coproc,
-                    int opcode_1,
-                    Register rd,
-                    CRegister crn,
-                    CRegister crm,
-                    int opcode_2,
-                    Condition cond) {
-  ASSERT(is_uint3(opcode_1) && is_uint3(opcode_2));
-  emit(cond | B27 | B26 | B25 | (opcode_1 & 7)*B21 | L | crn.code()*B16 |
-       rd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | B4 | crm.code());
-}
-
-
-void Assembler::mrc2(Coprocessor coproc,
-                     int opcode_1,
-                     Register rd,
-                     CRegister crn,
-                     CRegister crm,
-                     int opcode_2) {  // v5 and above
-  mrc(coproc, opcode_1, rd, crn, crm, opcode_2, static_cast<Condition>(nv));
-}
-
-
-void Assembler::ldc(Coprocessor coproc,
-                    CRegister crd,
-                    const MemOperand& src,
-                    LFlag l,
-                    Condition cond) {
-  addrmod5(cond | B27 | B26 | l | L | coproc*B8, crd, src);
-}
-
-
-void Assembler::ldc(Coprocessor coproc,
-                    CRegister crd,
-                    Register rn,
-                    int option,
-                    LFlag l,
-                    Condition cond) {
-  // unindexed addressing
-  ASSERT(is_uint8(option));
-  emit(cond | B27 | B26 | U | l | L | rn.code()*B16 | crd.code()*B12 |
-       coproc*B8 | (option & 255));
-}
-
-
-void Assembler::ldc2(Coprocessor coproc,
-                     CRegister crd,
-                     const MemOperand& src,
-                     LFlag l) {  // v5 and above
-  ldc(coproc, crd, src, l, static_cast<Condition>(nv));
-}
-
-
-void Assembler::ldc2(Coprocessor coproc,
-                     CRegister crd,
-                     Register rn,
-                     int option,
-                     LFlag l) {  // v5 and above
-  ldc(coproc, crd, rn, option, l, static_cast<Condition>(nv));
-}
-
-
-void Assembler::stc(Coprocessor coproc,
-                    CRegister crd,
-                    const MemOperand& dst,
-                    LFlag l,
-                    Condition cond) {
-  addrmod5(cond | B27 | B26 | l | coproc*B8, crd, dst);
-}
-
-
-void Assembler::stc(Coprocessor coproc,
-                    CRegister crd,
-                    Register rn,
-                    int option,
-                    LFlag l,
-                    Condition cond) {
-  // unindexed addressing
-  ASSERT(is_uint8(option));
-  emit(cond | B27 | B26 | U | l | rn.code()*B16 | crd.code()*B12 |
-       coproc*B8 | (option & 255));
-}
-
-
-void Assembler::stc2(Coprocessor
-                     coproc, CRegister crd,
-                     const MemOperand& dst,
-                     LFlag l) {  // v5 and above
-  stc(coproc, crd, dst, l, static_cast<Condition>(nv));
-}
-
-
-void Assembler::stc2(Coprocessor coproc,
-                     CRegister crd,
-                     Register rn,
-                     int option,
-                     LFlag l) {  // v5 and above
-  stc(coproc, crd, rn, option, l, static_cast<Condition>(nv));
-}
-
-
-// Support for VFP.
-void Assembler::vmov(const DwVfpRegister dst,
-                     const Register src1,
-                     const Register src2,
-                     const Condition cond) {
-  // Dm = <Rt,Rt2>.
-  // Instruction details available in ARM DDI 0406A, A8-646.
-  // cond(31-28) | 1100(27-24)| 010(23-21) | op=0(20) | Rt2(19-16) |
-  // Rt(15-12) | 1011(11-8) | 00(7-6) | M(5) | 1(4) | Vm
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  ASSERT(!src1.is(pc) && !src2.is(pc));
-  emit(cond | 0xC*B24 | B22 | src2.code()*B16 |
-       src1.code()*B12 | 0xB*B8 | B4 | dst.code());
-}
-
-
-void Assembler::vmov(const Register dst1,
-                     const Register dst2,
-                     const DwVfpRegister src,
-                     const Condition cond) {
-  // <Rt,Rt2> = Dm.
-  // Instruction details available in ARM DDI 0406A, A8-646.
-  // cond(31-28) | 1100(27-24)| 010(23-21) | op=1(20) | Rt2(19-16) |
-  // Rt(15-12) | 1011(11-8) | 00(7-6) | M(5) | 1(4) | Vm
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  ASSERT(!dst1.is(pc) && !dst2.is(pc));
-  emit(cond | 0xC*B24 | B22 | B20 | dst2.code()*B16 |
-       dst1.code()*B12 | 0xB*B8 | B4 | src.code());
-}
-
-
-void Assembler::vmov(const SwVfpRegister dst,
-                     const Register src,
-                     const Condition cond) {
-  // Sn = Rt.
-  // Instruction details available in ARM DDI 0406A, A8-642.
-  // cond(31-28) | 1110(27-24)| 000(23-21) | op=0(20) | Vn(19-16) |
-  // Rt(15-12) | 1010(11-8) | N(7)=0 | 00(6-5) | 1(4) | 0000(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  ASSERT(!src.is(pc));
-  emit(cond | 0xE*B24 | (dst.code() >> 1)*B16 |
-       src.code()*B12 | 0xA*B8 | (0x1 & dst.code())*B7 | B4);
-}
-
-
-void Assembler::vmov(const Register dst,
-                     const SwVfpRegister src,
-                     const Condition cond) {
-  // Rt = Sn.
-  // Instruction details available in ARM DDI 0406A, A8-642.
-  // cond(31-28) | 1110(27-24)| 000(23-21) | op=1(20) | Vn(19-16) |
-  // Rt(15-12) | 1010(11-8) | N(7)=0 | 00(6-5) | 1(4) | 0000(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  ASSERT(!dst.is(pc));
-  emit(cond | 0xE*B24 | B20 | (src.code() >> 1)*B16 |
-       dst.code()*B12 | 0xA*B8 | (0x1 & src.code())*B7 | B4);
-}
-
-
-void Assembler::vcvt(const DwVfpRegister dst,
-                     const SwVfpRegister src,
-                     const Condition cond) {
-  // Dd = Sm (integer in Sm converted to IEEE 64-bit doubles in Dd).
-  // Instruction details available in ARM DDI 0406A, A8-576.
-  // cond(31-28) | 11101(27-23)| D=?(22) | 11(21-20) | 1(19) |opc2=000(18-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | op(7)=1 | 1(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | B23 | 0x3*B20 | B19 |
-       dst.code()*B12 | 0x5*B9 | B8 | B7 | B6 |
-       (0x1 & src.code())*B5 | (src.code() >> 1));
-}
-
-
-void Assembler::vcvt(const SwVfpRegister dst,
-                     const DwVfpRegister src,
-                     const Condition cond) {
-  // Sd = Dm (IEEE 64-bit doubles in Dm converted to 32 bit integer in Sd).
-  // Instruction details available in ARM DDI 0406A, A8-576.
-  // cond(31-28) | 11101(27-23)| D=?(22) | 11(21-20) | 1(19) | opc2=101(18-16)|
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | op(7)=? | 1(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | B23 |(0x1 & dst.code())*B22 |
-       0x3*B20 | B19 | 0x5*B16 | (dst.code() >> 1)*B12 |
-       0x5*B9 | B8 | B7 | B6 | src.code());
-}
-
-
-void Assembler::vadd(const DwVfpRegister dst,
-                     const DwVfpRegister src1,
-                     const DwVfpRegister src2,
-                     const Condition cond) {
-  // Dd = vadd(Dn, Dm) double precision floating point addition.
-  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
-  // Instruction details available in ARM DDI 0406A, A8-536.
-  // cond(31-28) | 11100(27-23)| D=?(22) | 11(21-20) | Vn(19-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 0(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | 0x3*B20 | src1.code()*B16 |
-       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
-}
-
-
-void Assembler::vsub(const DwVfpRegister dst,
-                     const DwVfpRegister src1,
-                     const DwVfpRegister src2,
-                     const Condition cond) {
-  // Dd = vsub(Dn, Dm) double precision floating point subtraction.
-  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
-  // Instruction details available in ARM DDI 0406A, A8-784.
-  // cond(31-28) | 11100(27-23)| D=?(22) | 11(21-20) | Vn(19-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 1(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | 0x3*B20 | src1.code()*B16 |
-       dst.code()*B12 | 0x5*B9 | B8 | B6 | src2.code());
-}
-
-
-void Assembler::vmul(const DwVfpRegister dst,
-                     const DwVfpRegister src1,
-                     const DwVfpRegister src2,
-                     const Condition cond) {
-  // Dd = vmul(Dn, Dm) double precision floating point multiplication.
-  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
-  // Instruction details available in ARM DDI 0406A, A8-784.
-  // cond(31-28) | 11100(27-23)| D=?(22) | 10(21-20) | Vn(19-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 0(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | 0x2*B20 | src1.code()*B16 |
-       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
-}
-
-
-void Assembler::vdiv(const DwVfpRegister dst,
-                     const DwVfpRegister src1,
-                     const DwVfpRegister src2,
-                     const Condition cond) {
-  // Dd = vdiv(Dn, Dm) double precision floating point division.
-  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
-  // Instruction details available in ARM DDI 0406A, A8-584.
-  // cond(31-28) | 11101(27-23)| D=?(22) | 00(21-20) | Vn(19-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=? | 0(6) | M=?(5) | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | B23 | src1.code()*B16 |
-       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
-}
-
-
-void Assembler::vcmp(const DwVfpRegister src1,
-                     const DwVfpRegister src2,
-                     const SBit s,
-                     const Condition cond) {
-  // vcmp(Dd, Dm) double precision floating point comparison.
-  // Instruction details available in ARM DDI 0406A, A8-570.
-  // cond(31-28) | 11101 (27-23)| D=?(22) | 11 (21-20) | 0100 (19-16) |
-  // Vd(15-12) | 101(11-9) | sz(8)=1 | E(7)=? | 1(6) | M(5)=? | 0(4) | Vm(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 |B23 | 0x3*B20 | B18 |
-       src1.code()*B12 | 0x5*B9 | B8 | B6 | src2.code());
-}
-
-
-void Assembler::vmrs(Register dst, Condition cond) {
-  // Instruction details available in ARM DDI 0406A, A8-652.
-  // cond(31-28) | 1110 (27-24) | 1111(23-20)| 0001 (19-16) |
-  // Rt(15-12) | 1010 (11-8) | 0(7) | 00 (6-5) | 1(4) | 0000(3-0)
-  ASSERT(CpuFeatures::IsEnabled(VFP3));
-  emit(cond | 0xE*B24 | 0xF*B20 |  B16 |
-       dst.code()*B12 | 0xA*B8 | B4);
-}
-
-
-// Pseudo instructions
-void Assembler::lea(Register dst,
-                    const MemOperand& x,
-                    SBit s,
-                    Condition cond) {
-  int am = x.am_;
-  if (!x.rm_.is_valid()) {
-    // immediate offset
-    if ((am & P) == 0)  // post indexing
-      mov(dst, Operand(x.rn_), s, cond);
-    else if ((am & U) == 0)  // negative indexing
-      sub(dst, x.rn_, Operand(x.offset_), s, cond);
-    else
-      add(dst, x.rn_, Operand(x.offset_), s, cond);
-  } else {
-    // Register offset (shift_imm_ and shift_op_ are 0) or scaled
-    // register offset the constructors make sure than both shift_imm_
-    // and shift_op_ are initialized.
-    ASSERT(!x.rm_.is(pc));
-    if ((am & P) == 0)  // post indexing
-      mov(dst, Operand(x.rn_), s, cond);
-    else if ((am & U) == 0)  // negative indexing
-      sub(dst, x.rn_, Operand(x.rm_, x.shift_op_, x.shift_imm_), s, cond);
-    else
-      add(dst, x.rn_, Operand(x.rm_, x.shift_op_, x.shift_imm_), s, cond);
-  }
-}
-
-
-bool Assembler::ImmediateFitsAddrMode1Instruction(int32_t imm32) {
-  uint32_t dummy1;
-  uint32_t dummy2;
-  return fits_shifter(imm32, &dummy1, &dummy2, NULL);
-}
-
-
-void Assembler::BlockConstPoolFor(int instructions) {
-  BlockConstPoolBefore(pc_offset() + instructions * kInstrSize);
-}
-
-
-// Debugging
-void Assembler::RecordJSReturn() {
-  WriteRecordedPositions();
-  CheckBuffer();
-  RecordRelocInfo(RelocInfo::JS_RETURN);
-}
-
-
-void Assembler::RecordComment(const char* msg) {
-  if (FLAG_debug_code) {
-    CheckBuffer();
-    RecordRelocInfo(RelocInfo::COMMENT, reinterpret_cast<intptr_t>(msg));
-  }
-}
-
-
-void Assembler::RecordPosition(int pos) {
-  if (pos == RelocInfo::kNoPosition) return;
-  ASSERT(pos >= 0);
-  current_position_ = pos;
-}
-
-
-void Assembler::RecordStatementPosition(int pos) {
-  if (pos == RelocInfo::kNoPosition) return;
-  ASSERT(pos >= 0);
-  current_statement_position_ = pos;
-}
-
-
-void Assembler::WriteRecordedPositions() {
-  // Write the statement position if it is different from what was written last
-  // time.
-  if (current_statement_position_ != written_statement_position_) {
-    CheckBuffer();
-    RecordRelocInfo(RelocInfo::STATEMENT_POSITION, current_statement_position_);
-    written_statement_position_ = current_statement_position_;
-  }
-
-  // Write the position if it is different from what was written last time and
-  // also different from the written statement position.
-  if (current_position_ != written_position_ &&
-      current_position_ != written_statement_position_) {
-    CheckBuffer();
-    RecordRelocInfo(RelocInfo::POSITION, current_position_);
-    written_position_ = current_position_;
-  }
-}
-
-
-void Assembler::GrowBuffer() {
-  if (!own_buffer_) FATAL("external code buffer is too small");
-
-  // compute new buffer size
-  CodeDesc desc;  // the new buffer
-  if (buffer_size_ < 4*KB) {
-    desc.buffer_size = 4*KB;
-  } else if (buffer_size_ < 1*MB) {
-    desc.buffer_size = 2*buffer_size_;
-  } else {
-    desc.buffer_size = buffer_size_ + 1*MB;
-  }
-  CHECK_GT(desc.buffer_size, 0);  // no overflow
-
-  // setup new buffer
-  desc.buffer = NewArray<byte>(desc.buffer_size);
-
-  desc.instr_size = pc_offset();
-  desc.reloc_size = (buffer_ + buffer_size_) - reloc_info_writer.pos();
-
-  // copy the data
-  int pc_delta = desc.buffer - buffer_;
-  int rc_delta = (desc.buffer + desc.buffer_size) - (buffer_ + buffer_size_);
-  memmove(desc.buffer, buffer_, desc.instr_size);
-  memmove(reloc_info_writer.pos() + rc_delta,
-          reloc_info_writer.pos(), desc.reloc_size);
-
-  // switch buffers
-  DeleteArray(buffer_);
-  buffer_ = desc.buffer;
-  buffer_size_ = desc.buffer_size;
-  pc_ += pc_delta;
-  reloc_info_writer.Reposition(reloc_info_writer.pos() + rc_delta,
-                               reloc_info_writer.last_pc() + pc_delta);
-
-  // none of our relocation types are pc relative pointing outside the code
-  // buffer nor pc absolute pointing inside the code buffer, so there is no need
-  // to relocate any emitted relocation entries
-
-  // relocate pending relocation entries
-  for (int i = 0; i < num_prinfo_; i++) {
-    RelocInfo& rinfo = prinfo_[i];
-    ASSERT(rinfo.rmode() != RelocInfo::COMMENT &&
-           rinfo.rmode() != RelocInfo::POSITION);
-    if (rinfo.rmode() != RelocInfo::JS_RETURN) {
-      rinfo.set_pc(rinfo.pc() + pc_delta);
-    }
-  }
-}
-
-
-void Assembler::RecordRelocInfo(RelocInfo::Mode rmode, intptr_t data) {
-  RelocInfo rinfo(pc_, rmode, data);  // we do not try to reuse pool constants
-  if (rmode >= RelocInfo::JS_RETURN && rmode <= RelocInfo::STATEMENT_POSITION) {
-    // Adjust code for new modes
-    ASSERT(RelocInfo::IsJSReturn(rmode)
-           || RelocInfo::IsComment(rmode)
-           || RelocInfo::IsPosition(rmode));
-    // these modes do not need an entry in the constant pool
-  } else {
-    ASSERT(num_prinfo_ < kMaxNumPRInfo);
-    prinfo_[num_prinfo_++] = rinfo;
-    // Make sure the constant pool is not emitted in place of the next
-    // instruction for which we just recorded relocation info
-    BlockConstPoolBefore(pc_offset() + kInstrSize);
-  }
-  if (rinfo.rmode() != RelocInfo::NONE) {
-    // Don't record external references unless the heap will be serialized.
-    if (rmode == RelocInfo::EXTERNAL_REFERENCE) {
-#ifdef DEBUG
-      if (!Serializer::enabled()) {
-        Serializer::TooLateToEnableNow();
-      }
-#endif
-      if (!Serializer::enabled() && !FLAG_debug_code) {
-        return;
-      }
-    }
-    ASSERT(buffer_space() >= kMaxRelocSize);  // too late to grow buffer here
-    reloc_info_writer.Write(&rinfo);
-  }
-}
-
-
-void Assembler::CheckConstPool(bool force_emit, bool require_jump) {
-  // Calculate the offset of the next check. It will be overwritten
-  // when a const pool is generated or when const pools are being
-  // blocked for a specific range.
-  next_buffer_check_ = pc_offset() + kCheckConstInterval;
-
-  // There is nothing to do if there are no pending relocation info entries
-  if (num_prinfo_ == 0) return;
-
-  // We emit a constant pool at regular intervals of about kDistBetweenPools
-  // or when requested by parameter force_emit (e.g. after each function).
-  // We prefer not to emit a jump unless the max distance is reached or if we
-  // are running low on slots, which can happen if a lot of constants are being
-  // emitted (e.g. --debug-code and many static references).
-  int dist = pc_offset() - last_const_pool_end_;
-  if (!force_emit && dist < kMaxDistBetweenPools &&
-      (require_jump || dist < kDistBetweenPools) &&
-      // TODO(1236125): Cleanup the "magic" number below. We know that
-      // the code generation will test every kCheckConstIntervalInst.
-      // Thus we are safe as long as we generate less than 7 constant
-      // entries per instruction.
-      (num_prinfo_ < (kMaxNumPRInfo - (7 * kCheckConstIntervalInst)))) {
-    return;
-  }
-
-  // If we did not return by now, we need to emit the constant pool soon.
-
-  // However, some small sequences of instructions must not be broken up by the
-  // insertion of a constant pool; such sequences are protected by setting
-  // no_const_pool_before_, which is checked here. Also, recursive calls to
-  // CheckConstPool are blocked by no_const_pool_before_.
-  if (pc_offset() < no_const_pool_before_) {
-    // Emission is currently blocked; make sure we try again as soon as possible
-    next_buffer_check_ = no_const_pool_before_;
-
-    // Something is wrong if emission is forced and blocked at the same time
-    ASSERT(!force_emit);
-    return;
-  }
-
-  int jump_instr = require_jump ? kInstrSize : 0;
-
-  // Check that the code buffer is large enough before emitting the constant
-  // pool and relocation information (include the jump over the pool and the
-  // constant pool marker).
-  int max_needed_space =
-      jump_instr + kInstrSize + num_prinfo_*(kInstrSize + kMaxRelocSize);
-  while (buffer_space() <= (max_needed_space + kGap)) GrowBuffer();
-
-  // Block recursive calls to CheckConstPool
-  BlockConstPoolBefore(pc_offset() + jump_instr + kInstrSize +
-                       num_prinfo_*kInstrSize);
-  // Don't bother to check for the emit calls below.
-  next_buffer_check_ = no_const_pool_before_;
-
-  // Emit jump over constant pool if necessary
-  Label after_pool;
-  if (require_jump) b(&after_pool);
-
-  RecordComment("[ Constant Pool");
-
-  // Put down constant pool marker
-  // "Undefined instruction" as specified by A3.1 Instruction set encoding
-  emit(0x03000000 | num_prinfo_);
-
-  // Emit constant pool entries
-  for (int i = 0; i < num_prinfo_; i++) {
-    RelocInfo& rinfo = prinfo_[i];
-    ASSERT(rinfo.rmode() != RelocInfo::COMMENT &&
-           rinfo.rmode() != RelocInfo::POSITION &&
-           rinfo.rmode() != RelocInfo::STATEMENT_POSITION);
-    Instr instr = instr_at(rinfo.pc());
-
-    // Instruction to patch must be a ldr/str [pc, #offset]
-    // P and U set, B and W clear, Rn == pc, offset12 still 0
-    ASSERT((instr & (7*B25 | P | U | B | W | 15*B16 | Off12Mask)) ==
-           (2*B25 | P | U | pc.code()*B16));
-    int delta = pc_ - rinfo.pc() - 8;
-    ASSERT(delta >= -4);  // instr could be ldr pc, [pc, #-4] followed by targ32
-    if (delta < 0) {
-      instr &= ~U;
-      delta = -delta;
-    }
-    ASSERT(is_uint12(delta));
-    instr_at_put(rinfo.pc(), instr + delta);
-    emit(rinfo.data());
-  }
-  num_prinfo_ = 0;
-  last_const_pool_end_ = pc_offset();
-
-  RecordComment("]");
-
-  if (after_pool.is_linked()) {
-    bind(&after_pool);
-  }
-
-  // Since a constant pool was just emitted, move the check offset forward by
-  // the standard interval.
-  next_buffer_check_ = pc_offset() + kCheckConstInterval;
-}
-
-
-} }  // namespace v8::internal