subduino 0.3.1 → 0.5.0

data/README.md

@@ -0,0 +1,66 @@
+Subduino
+========
+
+AVR/Arduino Serial Tools on Ruby
+
+http://github.com/nofxx/subduino
+
+
+Install
+-------
+
+    gem install subduino
+
+
+Requirements
+------------
+
+Gems:
+
+* serialport http://github.com/hparra/ruby-serialport
+
+If you want:
+
+PubSub:
+
+* redis
+
+WebApp:
+
+* sinatra
+* haml
+
+
+Use
+---
+
+     subduino -p <PORT> -b <BAUDS>
+
+
+
+PubSub
+------
+
+
+    Subduino.start do |reading|
+      puts "Received from mcu: #{reading}"
+      # Mail.send("foo@bla.com") if reading && reading.digital?
+      # Postgre.remember(:sensor => reading)
+      # Mongoid.insert(:sensor => reading)
+      # ...
+    end
+
+    Subduino.write(TXT)
+
+
+Webapp
+------
+
+Need some love...
+
+
+
+License
+-------
+
+"WTFPL":http://sam.zoy.org/wtfpl/

data/Rakefile

@@ -1,51 +1,37 @@
-require 'rubygems'
-require 'rake'
+require 'bundler'
+Bundler.setup
 
-begin
-  require 'jeweler'
-  Jeweler::Tasks.new do |gem|
-    gem.name = "subduino"
-    gem.summary = "Arduino Ruby Helpers"
-    gem.description = "Interface, compile, upload... Play with arduino on ruby!"
-    gem.email = "x@nofxx.com"
-    gem.homepage = "http://github.com/nofxx/subduino"
-    gem.authors = ["Marcos Piccinini"]
-    gem.add_dependency "redis"
-    gem.add_dependency "eventmachine"
-    gem.add_development_dependency "rspec", ">= 1.2.9"
-    # gem is a Gem::Specification... see http://www.rubygems.org/read/chapter/20 for additional settings
-  end
-  Jeweler::GemcutterTasks.new
-rescue LoadError
-  puts "Jeweler (or a dependency) not available. Install it with: gem install jeweler"
-end
+require "rspec"
+require "rspec/core/rake_task"
 
-# require 'spec/rake/spectask'
-# Spec::Rake::SpecTask.new(:spec) do |spec|
-#   spec.libs << 'lib' << 'spec'
-#   spec.spec_files = FileList['spec/**/*_spec.rb']
-# end
+$LOAD_PATH.unshift File.expand_path("../lib", __FILE__)
+require "subduino/version"
 
-# Spec::Rake::SpecTask.new(:rcov) do |spec|
-#   spec.libs << 'lib' << 'spec'
-#   spec.pattern = 'spec/**/*_spec.rb'
-#   spec.rcov = true
-# end
+desc "Builds the gem"
+task :gem => :build
+task :build do
+  system "gem build subduino.gemspec"
+  Dir.mkdir("pkg") unless Dir.exists?("pkg")
+  system "mv subduino-#{Subduino::VERSION}.gem pkg/"
+end
 
-# task :spec => :check_dependencies
+task :install => :build do
+  system "sudo gem install pkg/subduino-#{Subduino::VERSION}.gem"
+end
 
-# task :default => :spec
+task :release => :build do
+  system "git tag -a v#{Subduino::VERSION} -m 'Tagging #{Subduino::VERSION}'"
+  system "git push --tags"
+  system "gem push pkg/subduino-#{Subduino::VERSION}.gem"
+end
 
-require 'rake/rdoctask'
-Rake::RDocTask.new do |rdoc|
-  version = File.exist?('VERSION') ? File.read('VERSION') : ""
 
-  rdoc.rdoc_dir = 'rdoc'
-  rdoc.title = "subduino #{version}"
-  rdoc.rdoc_files.include('README*')
-  rdoc.rdoc_files.include('lib/**/*.rb')
+RSpec::Core::RakeTask.new(:spec) do |spec|
+  spec.pattern = "spec/**/*_spec.rb"
 end
 
+task :default => [:spec]
+
 desc "Download and install arduino libraries"
 task :clibs do |t|
   puts "Starting...."

data/bin/subduino

@@ -1,56 +1,44 @@
 #!/usr/bin/env ruby
 $LOAD_PATH.unshift(File.join(File.dirname(__FILE__), '..', 'lib'))
+#require 'pry'
+#require 'faye'
 require 'rubygems'
 require 'optparse'
-
+require 'subduino'
+require 'subduino/os'
 
 Debug = false
 
-if File.exists?(f = ARGV.join)
-  # return unless f =~ /\.yml$/
-  puts "Using config file #{f}"
-  AppConfig = YAML.load(File.read(f))["opts"]
-else
-  AppConfig = { :log_interval => 30 }
-end
-
-OptionParser.new { |op|
+op = OptionParser.new { |op|
   op.on('-d', '--debug')  { |d| Debug = true }
-  op.on('-b', '--bauds=BAUDS', Integer)  { |b| AppConfig[:bauds] = b }
-  op.on('-e env')    { |val| set :environment, val.to_sym }
-  op.on('-s server') { |val| set :server, val }
-  op.on('-p port')   { |val| set :port, val.to_i }
+  op.on('-b', '--bauds=BAUDS', Integer)  { |b| Subduino::Opts[:bauds] = b }
+  op.on('-p', '--port=/dev/port')   { |p| Subduino::Opts[:port] = p }
+  # op.on('-e env')    { |val| set :environment, val.to_sym }
+  # op.on('-s server') { |val| set :server, val }
   op.parse!(ARGV)
 }
 
-require 'subduino'
-require 'subduino/os'
-require 'faye'
 # Cubduino.write("hahah")
 # puts Cubduino.read
 
-# set :run, true
-
-
 if ARGV.empty? || ARGV.join =~ /yml/
   LastRun = {:all => 0}
 
-  client = Faye::Client.new('http://localhost:8000/faye')
+  # client = Faye::Client.new('http://localhost:8000/faye')
 
   EM.run do
     if Debug
       puts "Starting on #{OS}"
+      puts "--------------------- #{Time.now}"
     end
 
     Subduino.start do |read|
-      #   Subduino::ArdIO.write("hi")
-      if Debug
-        #puts "--------------------- #{Time.now}"
-        #p read
-      end
-      if LastRun[:all] < (Time.now.to_i - AppConfig[:log_interval])
+
+      print read if Debug
+
+      if LastRun[:all] < (Time.now.to_i - Subduino::Opts[:log_interval])
         LastRun[:all] = Time.now.to_i
-        client.publish('/stats', 'data' => read)
+        # client.publish('/stats', 'data' => read)
         Subduino::Store.add_csv_to_store(read, true)
       else
         Subduino::Store.add_csv_to_store(read)

data/lib/subduino.rb

@@ -17,14 +17,22 @@ require 'subduino/ard_io'
 require 'subduino/ard_ps'
 require 'subduino/parse'
 require 'subduino/store'
-require 'subduino/arduino'
+require 'subduino/serial'
 
 #Thread.current.abort_on_exception = false
 
 module Subduino
+  if File.exists?(f = ARGV.join)
+    # return unless f =~ /\.yml$/
+    puts "Using config file #{f}"
+    Opts = YAML.load(File.read(f))["opts"]
+  else
+    Opts = { :log_interval => 30 }
+  end
+
+
   Log = Logger.new(const_defined?("DEBUG") ? STDOUT : "subduino-debug.log")
   # BAUDS = [300, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200]
-  Sensors = [:temp, :lux]
   # DATA_BITS = 8
   # DATA_STOP = 1
 

data/lib/subduino/ard_io.rb

@@ -8,9 +8,8 @@ module Subduino
       #
       # Direct access to the SerialPort instance.
       #
-      def sp
-        @sp ||= SerialPort.new(Arduino.find_usb, AppConfig[:bauds] || 57600) #, DATA_BITS, DATA_STOP, parity)
-        # @sp.read_timeout = 10;# @sp.write_timeout = 10
+      def serial
+        @serial ||= Serial.new(Opts[:bauds])
       end
 
       #
@@ -21,42 +20,43 @@ module Subduino
       # Feed it with a block to read the text.
       #
       def read(&proc)
-        Log.info "[USB] Found Device...#{Arduino.find_usb}"
-        Log.info "[USB] Starting Connect..." + sp.get_modem_params.map { |k,v| "#{k}: #{v}" }.join(" ")
-        Log.info "[USB] Read Timeout #{sp.read_timeout}" # {sp.write_timeout}"
+        Log.info "[USB] Found Device...#{serial.port}"
+        Log.info "[USB] Starting Connect..." + serial.sp.get_modem_params.map { |k,v| "#{k}: #{v}" }.join(" ")
+        # Log.info "[USB] Read Timeout #{sp.read_timeout}" # {sp.write_timeout}"
 
-        if sp
-        @iothread ||= Thread.new do
-          # Thread.current.abort_on_exception = false
-          icache = []
-          loop do
-            begin
-              while char = sp.getc
-                if !char.valid_encoding?
-                  bytes = char.bytes.to_a
-                  hexes = bytes.map { |b| b.to_s(16) }
-                  puts " - Bad char #{char} - (Hex: #{char.unpack('H')} | Byte(s) #{bytes} | Hexe(s) #{hexes}"
-                elsif char !~ /\n|\r/
-                  # print char if Debug
-                  icache << char
-                else
-                  data = icache.join(""); icache = []
-                  unless data.empty?
-                    Log.info "[IO  RX] #{data}"
-                    proc.call(data)
+        if serial.up?
+          @iothread ||= Thread.new do
+            # Thread.current.abort_on_exception = false
+            icache = []
+            loop do
+              begin
+                while char = @serial.read
+                  if !char.valid_encoding?
+                    bytes = char.bytes.to_a
+                    hexes = bytes.map { |b| b.to_s(16) }
+                    puts " - Bad char #{char} - (Hex: #{char.unpack('H')} | Byte(s) #{bytes} | Hexe(s) #{hexes}"
+                  # elsif char !~ /\n|\r/
+                  #   # print char if Debug
+                  #   icache << char
+                  else
+                    #data = icache.join(""); icache = []
+                    data = char
+                    unless data.empty?
+                      Log.info "[IO  RX] #{data}"
+                      proc.call(data)
+                    end
                   end
+                  # sleep 1
                 end
-                # sleep 1
+              rescue => e
+                Log.error "[USB] Error #{e}"
+                Log.error e.backtrace.join("\n")
+                stop!
+                exit 1
               end
-            rescue => e
-              Log.error "[USB] Error #{e}"
-              Log.error e.backtrace.join("\n")
-              stop!
-              exit 1
             end
           end
         end
-        end
 
       end
 
@@ -69,10 +69,7 @@ module Subduino
       #
       def write(msg)
         Log.info "[IO  TX] #{msg}"
-        txt = msg.gsub("\r|\n", "")
-       # txt += "\n" unless txt =~ /^\\n/
-        puts "=> Sending #{txt.inspect}" if Debug
-        sp.puts(msg)
+        serial.write(msg)
       end
 
 
@@ -80,7 +77,7 @@ module Subduino
       # Finish Him!
       #
       def stop!
-        sp.close
+        serial.kill
         Thread.kill @iothread
         Log.info "[IO] K.I.A"
       end

data/lib/subduino/scaffold/semantic.cache

@@ -0,0 +1,13 @@
+;; Object semantic.cache
+;; SEMANTICDB Tags save file
+(semanticdb-project-database "semantic.cache"
+  :file "semantic.cache"
+  :tables (list 
+   (semanticdb-table "Makefile"
+    :file "Makefile"
+    :pointmax 11514
+    :major-mode 'makefile-gmake-mode
+    :tokens '(("TARGET" variable nil (("!!SCAFFOLD!!")) nil nil nil [274 302]) ("ARDUINO_DIR" variable nil (("/usr/share/arduino")) nil nil nil [302 336]) ("ARDUINO_LIBS" variable nil (("Messenger")) nil nil ((dirty . t)) [336 361]) ("MCU" variable nil (("atmega328p")) nil nil nil [370 396]) ("F_CPU" variable nil (("16000000")) nil nil nil [396 420]) ("ARDUINO_PORT" variable nil (("/dev/ttyUSB*")) nil nil nil [420 448]) ("AVR_TOOLS_PATH" variable nil (("/usr/bin")) nil nil nil [457 483]) ("AVRDUDE_CONF" variable nil (("/usr/share/arduino/hardware/tools/avrdude.conf")) nil nil nil [483 547]) ("AVRDUDE_ARD_PROGRAMMER" variable nil (("stk500v1")) nil nil nil [558 592]) ("AVRDUDE_ARD_BAUDRATE" variable nil (("57600")) nil nil nil [592 623]) ("AVR_TOOLS_PATH" variable nil (("$(ARDUINO_DIR)/hardware/tools/avr/bin")) nil nil nil [2902 2960]) ("ARDUINO_ETC_PATH" variable nil (("$(ARDUINO_DIR)/hardware/tools/avr/etc")) nil nil nil [2991 3049]) ("AVRDUDE_CONF" variable nil (("$(ARDUINO_ETC_PATH)/avrdude.conf")) nil nil nil [3076 3128]) ("ARDUINO_LIB_PATH" variable nil (("$(ARDUINO_DIR)/libraries")) nil nil nil [3135 3180]) ("ARDUINO_CORE_PATH" variable nil (("$(ARDUINO_DIR)/hardware/arduino/cores/arduino")) nil nil nil [3180 3246]) ("OBJDIR" variable nil (("build-cli")) nil nil nil [3286 3310]) ("LOCAL_C_SRCS" variable nil (("$(wildcard *.c)")) nil nil nil [3402 3436]) ("LOCAL_CPP_SRCS" variable nil (("$(wildcard *.cpp)")) nil nil nil [3436 3472]) ("LOCAL_CC_SRCS" variable nil (("$(wildcard *.cc)")) nil nil nil [3472 3507]) ("LOCAL_PDE_SRCS" variable nil (("$(wildcard *.pde)")) nil nil nil [3507 3543]) ("LOCAL_AS_SRCS" variable nil (("$(wildcard *.S)")) nil nil nil [3543 3577]) ("LOCAL_OBJ_FILES" variable nil (("$(LOCAL_C_SRCS:.c=.o)") ("$(LOCAL_CPP_SRCS:.cpp=.o)") nil ("$(LOCAL_CC_SRCS:.cc=.o)") ("$(LOCAL_PDE_SRCS:.pde=.o)") nil ("$(LOCAL_AS_SRCS:.S=.o)")) nil nil nil [3577 3728]) ("LOCAL_OBJS" variable nil (("$(patsubst %,$(OBJDIR)/%,$(LOCAL_OBJ_FILES))")) nil nil nil [3728 3791]) ("DEPS" variable nil (("$(LOCAL_OBJS:.o=.d)")) nil nil nil [3811 3849]) ("CORE_C_SRCS" variable nil (("$(wildcard $(ARDUINO_CORE_PATH)/*.c)")) nil nil nil [3917 3972]) ("CORE_CPP_SRCS" variable nil (("$(wildcard $(ARDUINO_CORE_PATH)/*.cpp)")) nil nil nil [3972 4029]) ("EXTRA_CPP_SRCS" variable nil (("$(wildcard $(ARDUINO_LIB_PATH)/Messenger/*.cpp)")) nil nil nil [4029 4096]) ("CORE_OBJ_FILES" variable nil (("$(CORE_C_SRCS:.c=.o)") ("$(CORE_CPP_SRCS:.cpp=.o)") ("$(EXTRA_CPP_SRCS:.cpp=.o)")) nil nil nil [4096 4186]) ("CORE_OBJS" variable nil (("$(patsubst $(ARDUINO_CORE_PATH)/%, $(OBJDIR)/%,$(CORE_OBJ_FILES))")) nil nil nil [4186 4270]) ("OBJS" variable nil (("$(LOCAL_OBJS)") ("$(CORE_OBJS)")) nil nil nil [4302 4347]) ("TARGET_HEX" variable nil (("$(OBJDIR)/$(TARGET).hex")) nil nil nil [4480 4517]) ("TARGET_ELF" variable nil (("$(OBJDIR)/$(TARGET).elf")) nil nil nil [4517 4554]) ("TARGETS" variable nil (("$(OBJDIR)/$(TARGET).*")) nil nil nil [4554 4589]) ("DEP_FILE" variable nil (("$(OBJDIR)/depends.mk")) nil nil nil [4615 4649]) ("CC" variable nil (("$(AVR_TOOLS_PATH)/avr-gcc")) nil nil nil [4673 4709]) ("CXX" variable nil (("$(AVR_TOOLS_PATH)/avr-g++")) nil nil nil [4709 4745]) ("OBJCOPY" variable nil (("$(AVR_TOOLS_PATH)/avr-objcopy")) nil nil nil [4745 4785]) ("OBJDUMP" variable nil (("$(AVR_TOOLS_PATH)/avr-objdump")) nil nil nil [4785 4825]) ("AR" variable nil (("$(AVR_TOOLS_PATH)/avr-ar")) nil nil nil [4825 4860]) ("SIZE" variable nil (("$(AVR_TOOLS_PATH)/avr-size")) nil nil nil [4860 4897]) ("NM" variable nil (("$(AVR_TOOLS_PATH)/avr-nm")) nil nil nil [4897 4932]) ("REMOVE" variable nil (("rm") ("-f")) nil nil nil [4932 4948]) ("MV" variable nil (("mv") ("-f")) nil nil nil [4948 4964]) ("CAT" variable nil (("cat")) nil nil nil [4964 4978]) ("ECHO" variable nil (("echo")) nil nil nil [4978 4993]) ("SYS_LIBS" variable nil (("$(patsubst %,$(ARDUINO_LIB_PATH)/%,$(ARDUINO_LIBS))")) nil nil nil [5014 5082]) ("SYS_INCLUDES" variable nil (("$(patsubst %,-I%,$(SYS_LIBS))")) nil nil nil [5082 5128]) ("SYS_OBJS" variable nil (("$(wildcard $(patsubst %,%/*.o,$(SYS_LIBS)))")) nil nil nil [5128 5188]) ("CPPFLAGS" variable nil (("-mmcu=$(MCU)") ("-DF_CPU=$(F_CPU)") nil ("-I.") ("-I$(ARDUINO_CORE_PATH)") nil ("$(SYS_INCLUDES)") ("-g") ("-Os") ("-w") ("-Wall") nil ("-ffunction-sections") ("-fdata-sections")) nil nil nil [5189 5354]) ("CFLAGS" variable nil (("-std=gnu99")) nil nil nil [5354 5381]) ("CXXFLAGS" variable nil (("-fno-exceptions")) nil nil nil [5381 5413]) ("ASFLAGS" variable nil (("-mmcu=$(MCU)") ("-I.") ("-x") ("assembler-with-cpp")) nil nil nil [5413 5468]) ("LDFLAGS" variable nil (("-mmcu=$(MCU)") ("-lm") ("-Wl,--gc-sections") ("-Os")) nil nil nil [5468 5523]) ("ARD_PORT" variable nil (("$(firstword $(wildcard $(ARDUINO_PORT)))")) nil nil nil [5659 5716]) ("$(OBJDIR)" function nil (("%.c")) nil nil nil [6187 6249]) ("$(OBJDIR)" function nil (("%.cc")) nil nil nil [6249 6315]) ("$(OBJDIR)" function nil (("%.cpp")) nil nil nil [6315 6382]) ("$(OBJDIR)" function nil (("%.S")) nil nil nil [6382 6445]) ("$(OBJDIR)" function nil (("%.s")) nil nil nil [6445 6508]) ("$(OBJDIR)" function nil (("%.c")) nil nil nil [6508 6587]) ("$(OBJDIR)" function nil (("%.cc")) nil nil nil [6587 6670]) ("$(OBJDIR)" function nil (("%.cpp")) nil nil nil [6670 6754]) ("$(OBJDIR)" function nil (("%.S")) nil nil nil [6754 6834]) ("$(OBJDIR)" function nil (("%.s")) nil nil nil [6834 6914]) ("$(OBJDIR)" function nil (("%.pde")) nil nil nil [6941 7012]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.cpp")) nil nil nil [7012 7089]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.cpp")) nil nil nil [7089 7183]) ("$(OBJDIR)" function nil (("$(ARDUINO_CORE_PATH)/%.c")) nil nil nil [7196 7279]) ("$(OBJDIR)" function nil (("$(ARDUINO_CORE_PATH)/%.cpp")) nil nil nil [7279 7367]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.elf")) nil nil nil [7396 7468]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.elf")) nil nil nil [7468 7619]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.elf")) nil nil nil [7619 7680]) ("$(OBJDIR)" function nil (("$(OBJDIR)/%.elf")) nil nil nil [7680 7733]) ("AVRDUDE" variable nil (("$(AVR_TOOLS_PATH)/avrdude")) nil nil nil [7835 7880]) ("AVRDUDE_COM_OPTS" variable nil (("-q") ("-V") ("-p") ("$(MCU)")) nil nil nil [7887 7922]) ("+" variable nil (("-C") ("$(AVRDUDE_CONF)")) nil nil nil [7958 7980]) ("AVRDUDE_ARD_PROGRAMMER" variable nil (("stk500v1")) nil nil nil [8017 8051]) ("AVRDUDE_ARD_BAUDRATE" variable nil (("57600") nil) nil nil nil [8086 8125]) ("AVRDUDE_ARD_OPTS" variable nil (("-c") ("$(AVRDUDE_ARD_PROGRAMMER)") ("-b") ("$(AVRDUDE_ARD_BAUDRATE)") ("-P") ("$(ARD_PORT)")) nil nil nil [8132 8222]) ("ISP_LOCK_FUSE_PRE" variable nil (("0x3f")) nil nil nil [8248 8274]) ("ISP_LOCK_FUSE_POST" variable nil (("0xcf")) nil nil nil [8307 8333]) ("ISP_HIGH_FUSE" variable nil (("0xdf")) nil nil nil [8361 8387]) ("ISP_LOW_FUSE" variable nil (("0xff")) nil nil nil [8414 8440]) ("ISP_EXT_FUSE" variable nil (("0x01")) nil nil nil [8467 8493]) ("ISP_PROG" variable nil (("-c") ("stk500v2")) nil nil nil [8516 8543]) ("AVRDUDE_ISP_OPTS" variable nil (("-P") ("$(ISP_PORT)") ("$(ISP_PROG)")) nil nil nil [8550 8596]) ("all" function nil (("$(OBJDIR)") ("$(TARGET_HEX)")) nil nil nil [8706 8739]) ("$(OBJDIR)" function nil (nil) nil nil nil [8739 8771]) ("$(TARGET_ELF)" function nil (("$(OBJS)")) nil nil nil [8771 8843]) ("$(DEP_FILE)" function nil (("$(OBJDIR)") ("$(DEPS)")) nil nil nil [8843 8906]) ("upload" function nil (("reset") ("raw_upload")) nil nil nil [8906 8934]) ("raw_upload" function nil (("$(TARGET_HEX)")) nil nil nil [8934 9051]) ("reset" function nil (nil) nil nil nil [9246 9481]) ("ispload" function nil (("$(TARGET_HEX)")) nil nil nil [9481 9907]) ("clean" function nil (nil) nil nil nil [9907 9968]) ("depends" function nil (("$(DEPS)")) nil nil nil [9968 10017]) (".PHONY" function nil (("all") ("clean") ("depends") ("upload") ("raw_upload") ("reset")) nil nil nil [10017 10068]) ("$(DEP_FILE)" include nil nil nil [10068 10088]))
+    )
+   )
+  )

data/lib/subduino/serial.rb

@@ -0,0 +1,44 @@
+module Subduino
+
+  class Serial
+    attr_reader :sp, :port, :bauds
+
+    def initialize(bauds = 57600)
+      @bauds = bauds
+      @port = find_port
+      @sp ||= SerialPort.new(@port, bauds) #, DATA_BITS, DATA_STOP, parity)
+      # @sp.read_timeout  = 10
+      # @sp.write_timeout = 10
+    end
+
+    def find_port
+      prefix = RUBY_PLATFORM =~ /darwin/ ? ".usbmodem" : "USB"
+      port =  Dir.glob("/dev/tty#{prefix}*").first
+      raise "Can't find serial port" unless port
+      port
+    end
+
+    def read
+      sp.getc
+    end
+
+    def write msg
+      # txt += "\n" unless txt =~ /^\\n/
+      txt = msg.gsub("\r|\n", "")
+      Log.debug "=> Sending #{txt.inspect}"
+      sp.puts txt
+      # msg.to_s.chomp.split("").each do |char|
+      # @sp.putc char
+    end
+
+    def up?
+      sp
+    end
+
+    def kill
+      sp.close
+    end
+
+  end
+
+end

data/lib/subduino/version.rb

@@ -0,0 +1,4 @@
+module Subduino
+  VERSION = '0.5.0'
+end
+

data/spec/subduino/#cubduino_spec.rb#

@@ -0,0 +1,12 @@
+require File.expand_path(File.dirname(__FILE__) + '/../spec_helper')
+
+describe "Cubduino" do
+
+  it "should define module" do
+    Subduino.const_defined?("Cubduino").should be_true
+  end
+
+  
+
+
+end

data/spec/subduino/ard_io_spec.rb

@@ -3,8 +3,8 @@ require File.expand_path(File.dirname(__FILE__) + '/../spec_helper')
 describe ArdIO do
 
   it "should start serial port" do
-    Arduino.stub!(:find_usb).and_return("/dev/ttyUSB0")
+    Serial.stub!(:find_usb).and_return("/dev/ttyUSB0")
     SerialPort.should_receive(:new).with("/dev/ttyUSB0", 115200)
-    ArdIO.sp
+    ArdIO.serial
   end
 end

metadata

@@ -1,151 +1,130 @@
---- !ruby/object:Gem::Specification 
+--- !ruby/object:Gem::Specification
 name: subduino
-version: !ruby/object:Gem::Version 
-  prerelease: false
-  segments: 
-  - 0
-  - 3
-  - 1
-  version: 0.3.1
+version: !ruby/object:Gem::Version
+  version: 0.5.0
+  prerelease: 
 platform: ruby
-authors: 
+authors:
 - Marcos Piccinini
 autorequire: 
 bindir: bin
 cert_chain: []
-
-date: 2011-08-29 00:00:00 -03:00
-default_executable: 
-dependencies: 
-- !ruby/object:Gem::Dependency 
+date: 2012-01-17 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
   name: redis
+  requirement: &11141820 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
   prerelease: false
-  requirement: &id001 !ruby/object:Gem::Requirement 
+  version_requirements: *11141820
+- !ruby/object:Gem::Dependency
+  name: serialport
+  requirement: &11141120 !ruby/object:Gem::Requirement
     none: false
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :runtime
-  version_requirements: *id001
-- !ruby/object:Gem::Dependency 
-  name: eventmachine
   prerelease: false
-  requirement: &id002 !ruby/object:Gem::Requirement 
+  version_requirements: *11141120
+- !ruby/object:Gem::Dependency
+  name: eventmachine
+  requirement: &11140640 !ruby/object:Gem::Requirement
     none: false
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :runtime
-  version_requirements: *id002
-- !ruby/object:Gem::Dependency 
-  name: rspec
   prerelease: false
-  requirement: &id003 !ruby/object:Gem::Requirement 
+  version_requirements: *11140640
+- !ruby/object:Gem::Dependency
+  name: rspec
+  requirement: &11161880 !ruby/object:Gem::Requirement
     none: false
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 1
-        - 2
-        - 9
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
         version: 1.2.9
   type: :development
-  version_requirements: *id003
+  prerelease: false
+  version_requirements: *11161880
 description: Interface, compile, upload... Play with arduino on ruby!
 email: x@nofxx.com
-executables: 
+executables:
 - subduino
 - subduino-cli
-extensions: 
+extensions:
 - ext/subduino/extconf.rb
 extra_rdoc_files: []
-
-files: 
-- .document
-- Rakefile
-- Readme.textile
-- VERSION
-- bin/subduino
-- bin/subduino-cli
-- duino/.gitignore
-- duino/Makefile
-- duino/duino.pde
-- duino/duino.rb
-- duino/methods.pde
-- examples/duin
-- ext/subduino/Makefile
-- ext/subduino/cubduino.c
-- ext/subduino/cubduino.h
-- ext/subduino/cubduino.o
-- ext/subduino/cubduino.so
-- ext/subduino/extconf.rb
+files:
 - lib/subduino.rb
-- lib/subduino/ard_io.rb
-- lib/subduino/ard_ps.rb
-- lib/subduino/arduino.rb
-- lib/subduino/os.rb
-- lib/subduino/parse.rb
+- lib/subduino/parse/temp.rb
 - lib/subduino/parse/bool.rb
+- lib/subduino/parse/pressure.rb
 - lib/subduino/parse/energy.rb
 - lib/subduino/parse/flow.rb
 - lib/subduino/parse/lux.rb
 - lib/subduino/parse/presence.rb
-- lib/subduino/parse/pressure.rb
-- lib/subduino/parse/temp.rb
-- lib/subduino/scaffold/Makefile
+- lib/subduino/parse.rb
+- lib/subduino/os.rb
+- lib/subduino/ard_ps.rb
+- lib/subduino/ard_io.rb
+- lib/subduino/version.rb
+- lib/subduino/scaffold/scaffold.pde
+- lib/subduino/scaffold/semantic.cache
 - lib/subduino/scaffold/Makefile2
+- lib/subduino/scaffold/Makefile
 - lib/subduino/scaffold/generator.rb
-- lib/subduino/scaffold/scaffold.pde
 - lib/subduino/scaffold/scaffold.rb
+- lib/subduino/serial.rb
 - lib/subduino/store.rb
-- node/arduinode.js
-- node/server.js
-- node/vendor/faye.js
+- spec/subduino_spec.rb
 - spec/spec_helper.rb
-- spec/subduino/ard_io_spec.rb
 - spec/subduino/cubduino_spec.rb
-- spec/subduino/parse_spec.rb
 - spec/subduino/store_spec.rb
-- spec/subduino_spec.rb
-- subduino.gemspec
-has_rdoc: true
+- spec/subduino/ard_io_spec.rb
+- spec/subduino/#cubduino_spec.rb#
+- spec/subduino/parse_spec.rb
+- README.md
+- Rakefile
+- bin/subduino
+- bin/subduino-cli
+- ext/subduino/extconf.rb
 homepage: http://github.com/nofxx/subduino
 licenses: []
-
 post_install_message: 
 rdoc_options: []
-
-require_paths: 
+require_paths:
 - lib
-required_ruby_version: !ruby/object:Gem::Requirement 
+required_ruby_version: !ruby/object:Gem::Requirement
   none: false
-  requirements: 
-  - - ">="
-    - !ruby/object:Gem::Version 
-      segments: 
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+      segments:
       - 0
-      version: "0"
-required_rubygems_version: !ruby/object:Gem::Requirement 
+      hash: 330229238283923974
+required_rubygems_version: !ruby/object:Gem::Requirement
   none: false
-  requirements: 
-  - - ">="
-    - !ruby/object:Gem::Version 
-      segments: 
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+      segments:
       - 0
-      version: "0"
+      hash: 330229238283923974
 requirements: []
-
 rubyforge_project: 
-rubygems_version: 1.3.7
+rubygems_version: 1.8.11
 signing_key: 
 specification_version: 3
 summary: Arduino Ruby Helpers
 test_files: []
-