stripe 17.0.1 → 19.0.0

data/lib/stripe/resources/setup_intent.rb

@@ -4,7 +4,7 @@
 module Stripe
   # A SetupIntent guides you through the process of setting up and saving a customer's payment credentials for future payments.
   # For example, you can use a SetupIntent to set up and save your customer's card without immediately collecting a payment.
-  # Later, you can use [PaymentIntents](https://stripe.com/docs/api#payment_intents) to drive the payment flow.
+  # Later, you can use [PaymentIntents](https://api.stripe.com#payment_intents) to drive the payment flow.
   #
   # Create a SetupIntent when you're ready to collect your customer's payment credentials.
   # Don't maintain long-lived, unconfirmed SetupIntents because they might not be valid.
@@ -15,9 +15,9 @@ module Stripe
   # For example, cardholders in [certain regions](https://stripe.com/guides/strong-customer-authentication) might need to be run through
   # [Strong Customer Authentication](https://docs.stripe.com/strong-customer-authentication) during payment method collection
   # to streamline later [off-session payments](https://docs.stripe.com/payments/setup-intents).
-  # If you use the SetupIntent with a [Customer](https://stripe.com/docs/api#setup_intent_object-customer),
+  # If you use the SetupIntent with a [Customer](https://api.stripe.com#setup_intent_object-customer),
   # it automatically attaches the resulting payment method to that Customer after successful setup.
-  # We recommend using SetupIntents or [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) on
+  # We recommend using SetupIntents or [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) on
   # PaymentIntents to save payment methods to prevent saving invalid or unoptimized payment methods.
   #
   # By using SetupIntents, you can reduce friction for your customers, even as regulations change over time.
@@ -33,10 +33,10 @@ module Stripe
       "setup_intent"
     end
 
-    class AutomaticPaymentMethods < Stripe::StripeObject
+    class AutomaticPaymentMethods < ::Stripe::StripeObject
       # Controls whether this SetupIntent will accept redirect-based payment methods.
       #
-      # Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://stripe.com/docs/api/setup_intents/confirm) this SetupIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the setup.
+      # Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://docs.stripe.com/api/setup_intents/confirm) this SetupIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the setup.
       attr_reader :allow_redirects
       # Automatically calculates compatible payment methods
       attr_reader :enabled
@@ -50,16 +50,16 @@ module Stripe
       end
     end
 
-    class LastSetupError < Stripe::StripeObject
-      # For card errors resulting from a card issuer decline, a short string indicating [how to proceed with an error](https://stripe.com/docs/declines#retrying-issuer-declines) if they provide one.
+    class LastSetupError < ::Stripe::StripeObject
+      # For card errors resulting from a card issuer decline, a short string indicating [how to proceed with an error](https://docs.stripe.com/declines#retrying-issuer-declines) if they provide one.
       attr_reader :advice_code
       # For card errors, the ID of the failed charge.
       attr_reader :charge
-      # For some errors that could be handled programmatically, a short string indicating the [error code](https://stripe.com/docs/error-codes) reported.
+      # For some errors that could be handled programmatically, a short string indicating the [error code](https://docs.stripe.com/error-codes) reported.
       attr_reader :code
-      # For card errors resulting from a card issuer decline, a short string indicating the [card issuer's reason for the decline](https://stripe.com/docs/declines#issuer-declines) if they provide one.
+      # For card errors resulting from a card issuer decline, a short string indicating the [card issuer's reason for the decline](https://docs.stripe.com/declines#issuer-declines) if they provide one.
       attr_reader :decline_code
-      # A URL to more information about the [error code](https://stripe.com/docs/error-codes) reported.
+      # A URL to more information about the [error code](https://docs.stripe.com/error-codes) reported.
       attr_reader :doc_url
       # A human-readable message providing more details about the error. For card errors, these messages can be shown to your users.
       attr_reader :message
@@ -75,17 +75,17 @@ module Stripe
       # see the history of payment attempts for a particular session.
       #
       # A PaymentIntent transitions through
-      # [multiple statuses](https://stripe.com/docs/payments/intents#intent-statuses)
+      # [multiple statuses](/payments/paymentintents/lifecycle)
       # throughout its lifetime as it interfaces with Stripe.js to perform
       # authentication flows and ultimately creates at most one successful charge.
       #
-      # Related guide: [Payment Intents API](https://stripe.com/docs/payments/payment-intents)
+      # Related guide: [Payment Intents API](https://docs.stripe.com/payments/payment-intents)
       attr_reader :payment_intent
       # PaymentMethod objects represent your customer's payment instruments.
-      # You can use them with [PaymentIntents](https://stripe.com/docs/payments/payment-intents) to collect payments or save them to
+      # You can use them with [PaymentIntents](https://docs.stripe.com/payments/payment-intents) to collect payments or save them to
       # Customer objects to store instrument details for future payments.
       #
-      # Related guides: [Payment Methods](https://stripe.com/docs/payments/payment-methods) and [More Payment Scenarios](https://stripe.com/docs/payments/more-payment-scenarios).
+      # Related guides: [Payment Methods](https://docs.stripe.com/payments/payment-methods) and [More Payment Scenarios](https://docs.stripe.com/payments/more-payment-scenarios).
       attr_reader :payment_method
       # If the error is specific to the type of payment method, the payment method type that had a problem. This field is only populated for invoice-related errors.
       attr_reader :payment_method_type
@@ -93,7 +93,7 @@ module Stripe
       attr_reader :request_log_url
       # A SetupIntent guides you through the process of setting up and saving a customer's payment credentials for future payments.
       # For example, you can use a SetupIntent to set up and save your customer's card without immediately collecting a payment.
-      # Later, you can use [PaymentIntents](https://stripe.com/docs/api#payment_intents) to drive the payment flow.
+      # Later, you can use [PaymentIntents](https://api.stripe.com#payment_intents) to drive the payment flow.
       #
       # Create a SetupIntent when you're ready to collect your customer's payment credentials.
       # Don't maintain long-lived, unconfirmed SetupIntents because they might not be valid.
@@ -104,9 +104,9 @@ module Stripe
       # For example, cardholders in [certain regions](https://stripe.com/guides/strong-customer-authentication) might need to be run through
       # [Strong Customer Authentication](https://docs.stripe.com/strong-customer-authentication) during payment method collection
       # to streamline later [off-session payments](https://docs.stripe.com/payments/setup-intents).
-      # If you use the SetupIntent with a [Customer](https://stripe.com/docs/api#setup_intent_object-customer),
+      # If you use the SetupIntent with a [Customer](https://api.stripe.com#setup_intent_object-customer),
       # it automatically attaches the resulting payment method to that Customer after successful setup.
-      # We recommend using SetupIntents or [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) on
+      # We recommend using SetupIntents or [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) on
       # PaymentIntents to save payment methods to prevent saving invalid or unoptimized payment methods.
       #
       # By using SetupIntents, you can reduce friction for your customers, even as regulations change over time.
@@ -127,9 +127,9 @@ module Stripe
       end
     end
 
-    class NextAction < Stripe::StripeObject
-      class CashappHandleRedirectOrDisplayQrCode < Stripe::StripeObject
-        class QrCode < Stripe::StripeObject
+    class NextAction < ::Stripe::StripeObject
+      class CashappHandleRedirectOrDisplayQrCode < ::Stripe::StripeObject
+        class QrCode < ::Stripe::StripeObject
           # The date (unix timestamp) when the QR code expires.
           attr_reader :expires_at
           # The image_url_png string used to render QR code
@@ -161,7 +161,7 @@ module Stripe
         end
       end
 
-      class RedirectToUrl < Stripe::StripeObject
+      class RedirectToUrl < ::Stripe::StripeObject
         # If the customer does not exit their browser while authenticating, they will be redirected to this specified URL after completion.
         attr_reader :return_url
         # The URL you must redirect your customer to in order to authenticate.
@@ -176,7 +176,38 @@ module Stripe
         end
       end
 
-      class VerifyWithMicrodeposits < Stripe::StripeObject
+      class UpiHandleRedirectOrDisplayQrCode < ::Stripe::StripeObject
+        class QrCode < ::Stripe::StripeObject
+          # The date (unix timestamp) when the QR code expires.
+          attr_reader :expires_at
+          # The image_url_png string used to render QR code
+          attr_reader :image_url_png
+          # The image_url_svg string used to render QR code
+          attr_reader :image_url_svg
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+        # The URL to the hosted UPI instructions page, which allows customers to view the QR code.
+        attr_reader :hosted_instructions_url
+        # Attribute for field qr_code
+        attr_reader :qr_code
+
+        def self.inner_class_types
+          @inner_class_types = { qr_code: QrCode }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
+      end
+
+      class VerifyWithMicrodeposits < ::Stripe::StripeObject
         # The timestamp when the microdeposits are expected to land.
         attr_reader :arrival_date
         # The URL for the hosted verification page, which allows customers to verify their bank account.
@@ -198,6 +229,8 @@ module Stripe
       attr_reader :redirect_to_url
       # Type of the next action to perform. Refer to the other child attributes under `next_action` for available values. Examples include: `redirect_to_url`, `use_stripe_sdk`, `alipay_handle_redirect`, `oxxo_display_details`, or `verify_with_microdeposits`.
       attr_reader :type
+      # Attribute for field upi_handle_redirect_or_display_qr_code
+      attr_reader :upi_handle_redirect_or_display_qr_code
       # When confirming a SetupIntent with Stripe.js, Stripe.js depends on the contents of this dictionary to invoke authentication flows. The shape of the contents is subject to change and is only intended to be used by Stripe.js.
       attr_reader :use_stripe_sdk
       # Attribute for field verify_with_microdeposits
@@ -207,6 +240,7 @@ module Stripe
         @inner_class_types = {
           cashapp_handle_redirect_or_display_qr_code: CashappHandleRedirectOrDisplayQrCode,
           redirect_to_url: RedirectToUrl,
+          upi_handle_redirect_or_display_qr_code: UpiHandleRedirectOrDisplayQrCode,
           verify_with_microdeposits: VerifyWithMicrodeposits,
         }
       end
@@ -216,7 +250,7 @@ module Stripe
       end
     end
 
-    class PaymentMethodConfigurationDetails < Stripe::StripeObject
+    class PaymentMethodConfigurationDetails < ::Stripe::StripeObject
       # ID of the payment method configuration used.
       attr_reader :id
       # ID of the parent payment method configuration used.
@@ -231,9 +265,9 @@ module Stripe
       end
     end
 
-    class PaymentMethodOptions < Stripe::StripeObject
-      class AcssDebit < Stripe::StripeObject
-        class MandateOptions < Stripe::StripeObject
+    class PaymentMethodOptions < ::Stripe::StripeObject
+      class AcssDebit < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
           # A URL for custom mandate text
           attr_reader :custom_mandate_url
           # List of Stripe products where this mandate can be selected automatically.
@@ -257,7 +291,7 @@ module Stripe
         attr_reader :currency
         # Attribute for field mandate_options
         attr_reader :mandate_options
-        # Bank account verification method.
+        # Bank account verification method. The default value is `automatic`.
         attr_reader :verification_method
 
         def self.inner_class_types
@@ -269,7 +303,7 @@ module Stripe
         end
       end
 
-      class AmazonPay < Stripe::StripeObject
+      class AmazonPay < ::Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -279,8 +313,8 @@ module Stripe
         end
       end
 
-      class BacsDebit < Stripe::StripeObject
-        class MandateOptions < Stripe::StripeObject
+      class BacsDebit < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
           # Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
           attr_reader :reference_prefix
 
@@ -304,9 +338,9 @@ module Stripe
         end
       end
 
-      class Card < Stripe::StripeObject
-        class MandateOptions < Stripe::StripeObject
-          # Amount to be charged for future payments.
+      class Card < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
+          # Amount to be charged for future payments, specified in the presentment currency.
           attr_reader :amount
           # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
           attr_reader :amount_type
@@ -339,7 +373,7 @@ module Stripe
         attr_reader :mandate_options
         # Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the setup intent. Can be only set confirm-time.
         attr_reader :network
-        # We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+        # We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
         attr_reader :request_three_d_secure
 
         def self.inner_class_types
@@ -351,7 +385,7 @@ module Stripe
         end
       end
 
-      class CardPresent < Stripe::StripeObject
+      class CardPresent < ::Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -361,7 +395,7 @@ module Stripe
         end
       end
 
-      class Klarna < Stripe::StripeObject
+      class Klarna < ::Stripe::StripeObject
         # The currency of the setup intent. Three letter ISO currency code.
         attr_reader :currency
         # Preferred locale of the Klarna checkout page that the customer is redirected to.
@@ -376,7 +410,7 @@ module Stripe
         end
       end
 
-      class Link < Stripe::StripeObject
+      class Link < ::Stripe::StripeObject
         # [Deprecated] This is a legacy parameter that no longer has any function.
         attr_reader :persistent_token
 
@@ -389,7 +423,7 @@ module Stripe
         end
       end
 
-      class Paypal < Stripe::StripeObject
+      class Paypal < ::Stripe::StripeObject
         # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
         attr_reader :billing_agreement_id
 
@@ -402,8 +436,45 @@ module Stripe
         end
       end
 
-      class SepaDebit < Stripe::StripeObject
-        class MandateOptions < Stripe::StripeObject
+      class Payto < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
+          # Amount that will be collected. It is required when `amount_type` is `fixed`.
+          attr_reader :amount
+          # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively. Defaults to `maximum`.
+          attr_reader :amount_type
+          # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+          attr_reader :end_date
+          # The periodicity at which payments will be collected. Defaults to `adhoc`.
+          attr_reader :payment_schedule
+          # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+          attr_reader :payments_per_period
+          # The purpose for which payments are made. Has a default value based on your merchant category code.
+          attr_reader :purpose
+          # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+          attr_reader :start_date
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+        # Attribute for field mandate_options
+        attr_reader :mandate_options
+
+        def self.inner_class_types
+          @inner_class_types = { mandate_options: MandateOptions }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
+      end
+
+      class SepaDebit < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
           # Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
           attr_reader :reference_prefix
 
@@ -427,9 +498,40 @@ module Stripe
         end
       end
 
-      class UsBankAccount < Stripe::StripeObject
-        class FinancialConnections < Stripe::StripeObject
-          class Filters < Stripe::StripeObject
+      class Upi < ::Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
+          # Amount to be charged for future payments.
+          attr_reader :amount
+          # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
+          attr_reader :amount_type
+          # A description of the mandate or subscription that is meant to be displayed to the customer.
+          attr_reader :description
+          # End date of the mandate or subscription.
+          attr_reader :end_date
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+        # Attribute for field mandate_options
+        attr_reader :mandate_options
+
+        def self.inner_class_types
+          @inner_class_types = { mandate_options: MandateOptions }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
+      end
+
+      class UsBankAccount < ::Stripe::StripeObject
+        class FinancialConnections < ::Stripe::StripeObject
+          class Filters < ::Stripe::StripeObject
             # The account subcategories to use to filter for possible accounts to link. Valid subcategories are `checking` and `savings`.
             attr_reader :account_subcategories
 
@@ -459,7 +561,7 @@ module Stripe
           end
         end
 
-        class MandateOptions < Stripe::StripeObject
+        class MandateOptions < ::Stripe::StripeObject
           # Mandate collection method
           attr_reader :collection_method
 
@@ -475,7 +577,7 @@ module Stripe
         attr_reader :financial_connections
         # Attribute for field mandate_options
         attr_reader :mandate_options
-        # Bank account verification method.
+        # Bank account verification method. The default value is `automatic`.
         attr_reader :verification_method
 
         def self.inner_class_types
@@ -505,8 +607,12 @@ module Stripe
       attr_reader :link
       # Attribute for field paypal
       attr_reader :paypal
+      # Attribute for field payto
+      attr_reader :payto
       # Attribute for field sepa_debit
       attr_reader :sepa_debit
+      # Attribute for field upi
+      attr_reader :upi
       # Attribute for field us_bank_account
       attr_reader :us_bank_account
 
@@ -520,7 +626,9 @@ module Stripe
           klarna: Klarna,
           link: Link,
           paypal: Paypal,
+          payto: Payto,
           sepa_debit: SepaDebit,
+          upi: Upi,
           us_bank_account: UsBankAccount,
         }
       end
@@ -549,8 +657,14 @@ module Stripe
     #
     # If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
     attr_reader :customer
+    # ID of the Account this SetupIntent belongs to, if one exists.
+    #
+    # If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
+    attr_reader :customer_account
     # An arbitrary string attached to the object. Often useful for displaying to users.
     attr_reader :description
+    # Payment method types that are excluded from this SetupIntent.
+    attr_reader :excluded_payment_method_types
     # Indicates the directions of money movement for which this payment method is intended to be used.
     #
     # Include `inbound` if you intend to use the payment method as the origin to pull funds from. Include `outbound` if you intend to use the payment method as the destination to send funds to. You can include both if you intend to use the payment method for both purposes.
@@ -561,11 +675,11 @@ module Stripe
     attr_reader :last_setup_error
     # The most recent SetupAttempt for this SetupIntent.
     attr_reader :latest_attempt
-    # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+    # If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`.
     attr_reader :livemode
     # ID of the multi use Mandate generated by the SetupIntent.
     attr_reader :mandate
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     attr_reader :metadata
     # If present, this property tells you what actions you need to take in order for your customer to continue payment setup.
     attr_reader :next_action
@@ -575,7 +689,7 @@ module Stripe
     attr_reader :on_behalf_of
     # ID of the payment method used with this SetupIntent. If the payment method is `card_present` and isn't a digital wallet, then the [generated_card](https://docs.stripe.com/api/setup_attempts/object#setup_attempt_object-payment_method_details-card_present-generated_card) associated with the `latest_attempt` is attached to the Customer instead.
     attr_reader :payment_method
-    # Information about the [payment method configuration](https://stripe.com/docs/api/payment_method_configurations) used for this Setup Intent.
+    # Information about the [payment method configuration](https://docs.stripe.com/api/payment_method_configurations) used for this Setup Intent.
     attr_reader :payment_method_configuration_details
     # Payment method-specific configuration for this SetupIntent.
     attr_reader :payment_method_options
@@ -583,7 +697,7 @@ module Stripe
     attr_reader :payment_method_types
     # ID of the single_use Mandate generated by the SetupIntent.
     attr_reader :single_use_mandate
-    # [Status](https://stripe.com/docs/payments/intents#intent-statuses) of this SetupIntent, one of `requires_payment_method`, `requires_confirmation`, `requires_action`, `processing`, `canceled`, or `succeeded`.
+    # [Status](https://docs.stripe.com/payments/intents#intent-statuses) of this SetupIntent, one of `requires_payment_method`, `requires_confirmation`, `requires_action`, `processing`, `canceled`, or `succeeded`.
     attr_reader :status
     # Indicates how the payment method is intended to be used in the future.
     #

data/lib/stripe/resources/shipping_rate.rb

@@ -3,7 +3,7 @@
 
 module Stripe
   # Shipping rates describe the price of shipping presented to your customers and
-  # applied to a purchase. For more information, see [Charge for shipping](https://stripe.com/docs/payments/during-payment/charge-shipping).
+  # applied to a purchase. For more information, see [Charge for shipping](https://docs.stripe.com/payments/during-payment/charge-shipping).
   class ShippingRate < APIResource
     extend Stripe::APIOperations::Create
     extend Stripe::APIOperations::List
@@ -14,8 +14,8 @@ module Stripe
       "shipping_rate"
     end
 
-    class DeliveryEstimate < Stripe::StripeObject
-      class Maximum < Stripe::StripeObject
+    class DeliveryEstimate < ::Stripe::StripeObject
+      class Maximum < ::Stripe::StripeObject
         # A unit of time.
         attr_reader :unit
         # Must be greater than 0.
@@ -30,7 +30,7 @@ module Stripe
         end
       end
 
-      class Minimum < Stripe::StripeObject
+      class Minimum < ::Stripe::StripeObject
         # A unit of time.
         attr_reader :unit
         # Must be greater than 0.
@@ -58,8 +58,8 @@ module Stripe
       end
     end
 
-    class FixedAmount < Stripe::StripeObject
-      class CurrencyOptions < Stripe::StripeObject
+    class FixedAmount < ::Stripe::StripeObject
+      class CurrencyOptions < ::Stripe::StripeObject
         # A non-negative integer in cents representing how much to charge.
         attr_reader :amount
         # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
@@ -100,15 +100,15 @@ module Stripe
     attr_reader :fixed_amount
     # Unique identifier for the object.
     attr_reader :id
-    # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+    # If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`.
     attr_reader :livemode
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     attr_reader :metadata
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
     # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
     attr_reader :tax_behavior
-    # A [tax code](https://stripe.com/docs/tax/tax-categories) ID. The Shipping tax code is `txcd_92010001`.
+    # A [tax code](https://docs.stripe.com/tax/tax-categories) ID. The Shipping tax code is `txcd_92010001`.
     attr_reader :tax_code
     # The type of calculation to use on the shipping rate.
     attr_reader :type

data/lib/stripe/resources/sigma/scheduled_query_run.rb

@@ -3,7 +3,7 @@
 
 module Stripe
   module Sigma
-    # If you have [scheduled a Sigma query](https://stripe.com/docs/sigma/scheduled-queries), you'll
+    # If you have [scheduled a Sigma query](https://docs.stripe.com/sigma/scheduled-queries), you'll
     # receive a `sigma.scheduled_query_run.created` webhook each time the query
     # runs. The webhook contains a `ScheduledQueryRun` object, which you can use to
     # retrieve the query results.
@@ -15,7 +15,7 @@ module Stripe
         "scheduled_query_run"
       end
 
-      class Error < Stripe::StripeObject
+      class Error < ::Stripe::StripeObject
         # Information about the run failure.
         attr_reader :message
 
@@ -37,7 +37,7 @@ module Stripe
       attr_reader :file
       # Unique identifier for the object.
       attr_reader :id
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+      # If the object exists in live mode, the value is `true`. If the object exists in test mode, the value is `false`.
       attr_reader :livemode
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object