stripe 13.4.0 → 13.5.0.pre.beta.1

data/lib/stripe/resources/price.rb

@@ -19,6 +19,655 @@ module Stripe
       "price"
     end
 
+    class CurrencyOptions < Stripe::StripeObject
+      class CustomUnitAmount < Stripe::StripeObject
+        # The maximum unit amount the customer can specify for this item.
+        attr_reader :maximum
+        # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
+        attr_reader :minimum
+        # The starting unit amount which can be updated by the customer.
+        attr_reader :preset
+      end
+
+      class Tier < Stripe::StripeObject
+        # Price for the entire tier.
+        attr_reader :flat_amount
+        # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
+        attr_reader :flat_amount_decimal
+        # Per unit price for units relevant to the tier.
+        attr_reader :unit_amount
+        # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
+        attr_reader :unit_amount_decimal
+        # Up to and including to this quantity will be contained in the tier.
+        attr_reader :up_to
+      end
+      # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
+      attr_reader :custom_unit_amount
+      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+      attr_reader :tax_behavior
+      # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
+      attr_reader :tiers
+      # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
+      attr_reader :unit_amount
+      # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
+      attr_reader :unit_amount_decimal
+    end
+
+    class CustomUnitAmount < Stripe::StripeObject
+      # The maximum unit amount the customer can specify for this item.
+      attr_reader :maximum
+      # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
+      attr_reader :minimum
+      # The starting unit amount which can be updated by the customer.
+      attr_reader :preset
+    end
+
+    class MigrateTo < Stripe::StripeObject
+      # The behavior controlling at what point in the subscription lifecycle to migrate the price
+      attr_reader :behavior
+      # The unix timestamp after at which subscriptions will start to migrate to the new price.
+      attr_reader :effective_after
+      # The id of the price being migrated to
+      attr_reader :price
+    end
+
+    class Recurring < Stripe::StripeObject
+      # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
+      attr_reader :aggregate_usage
+      # The frequency at which a subscription is billed. One of `day`, `week`, `month` or `year`.
+      attr_reader :interval
+      # The number of intervals (specified in the `interval` attribute) between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months.
+      attr_reader :interval_count
+      # The meter tracking the usage of a metered price
+      attr_reader :meter
+      # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
+      attr_reader :trial_period_days
+      # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
+      attr_reader :usage_type
+    end
+
+    class Tier < Stripe::StripeObject
+      # Price for the entire tier.
+      attr_reader :flat_amount
+      # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
+      attr_reader :flat_amount_decimal
+      # Per unit price for units relevant to the tier.
+      attr_reader :unit_amount
+      # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
+      attr_reader :unit_amount_decimal
+      # Up to and including to this quantity will be contained in the tier.
+      attr_reader :up_to
+    end
+
+    class TransformQuantity < Stripe::StripeObject
+      # Divide usage by this number.
+      attr_reader :divide_by
+      # After division, either round the result `up` or `down`.
+      attr_reader :round
+    end
+
+    class ListParams < Stripe::RequestParams
+      class Created < Stripe::RequestParams
+        # Minimum value to filter by (exclusive)
+        attr_accessor :gt
+        # Minimum value to filter by (inclusive)
+        attr_accessor :gte
+        # Maximum value to filter by (exclusive)
+        attr_accessor :lt
+        # Maximum value to filter by (inclusive)
+        attr_accessor :lte
+
+        def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+          @gt = gt
+          @gte = gte
+          @lt = lt
+          @lte = lte
+        end
+      end
+
+      class Recurring < Stripe::RequestParams
+        # Filter by billing frequency. Either `day`, `week`, `month` or `year`.
+        attr_accessor :interval
+        # Filter by the price's meter.
+        attr_accessor :meter
+        # Filter by the usage type for this price. Can be either `metered` or `licensed`.
+        attr_accessor :usage_type
+
+        def initialize(interval: nil, meter: nil, usage_type: nil)
+          @interval = interval
+          @meter = meter
+          @usage_type = usage_type
+        end
+      end
+      # Only return prices that are active or inactive (e.g., pass `false` to list all inactive prices).
+      attr_accessor :active
+      # A filter on the list, based on the object `created` field. The value can be a string with an integer Unix timestamp, or it can be a dictionary with a number of different query options.
+      attr_accessor :created
+      # Only return prices for the given currency.
+      attr_accessor :currency
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # Only return the price with these lookup_keys, if any exist. You can specify up to 10 lookup_keys.
+      attr_accessor :lookup_keys
+      # Only return prices for the given product.
+      attr_accessor :product
+      # Only return prices with these recurring fields.
+      attr_accessor :recurring
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+      # Only return prices of type `recurring` or `one_time`.
+      attr_accessor :type
+
+      def initialize(
+        active: nil,
+        created: nil,
+        currency: nil,
+        ending_before: nil,
+        expand: nil,
+        limit: nil,
+        lookup_keys: nil,
+        product: nil,
+        recurring: nil,
+        starting_after: nil,
+        type: nil
+      )
+        @active = active
+        @created = created
+        @currency = currency
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @lookup_keys = lookup_keys
+        @product = product
+        @recurring = recurring
+        @starting_after = starting_after
+        @type = type
+      end
+    end
+
+    class CreateParams < Stripe::RequestParams
+      class CurrencyOptions < Stripe::RequestParams
+        class CustomUnitAmount < Stripe::RequestParams
+          # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
+          attr_accessor :enabled
+          # The maximum unit amount the customer can specify for this item.
+          attr_accessor :maximum
+          # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
+          attr_accessor :minimum
+          # The starting unit amount which can be updated by the customer.
+          attr_accessor :preset
+
+          def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
+            @enabled = enabled
+            @maximum = maximum
+            @minimum = minimum
+            @preset = preset
+          end
+        end
+
+        class Tier < Stripe::RequestParams
+          # The flat billing amount for an entire tier, regardless of the number of units in the tier.
+          attr_accessor :flat_amount
+          # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
+          attr_accessor :flat_amount_decimal
+          # The per unit billing amount for each individual unit for which this tier applies.
+          attr_accessor :unit_amount
+          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+          attr_accessor :unit_amount_decimal
+          # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
+          attr_accessor :up_to
+
+          def initialize(
+            flat_amount: nil,
+            flat_amount_decimal: nil,
+            unit_amount: nil,
+            unit_amount_decimal: nil,
+            up_to: nil
+          )
+            @flat_amount = flat_amount
+            @flat_amount_decimal = flat_amount_decimal
+            @unit_amount = unit_amount
+            @unit_amount_decimal = unit_amount_decimal
+            @up_to = up_to
+          end
+        end
+        # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
+        attr_accessor :custom_unit_amount
+        # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+        attr_accessor :tax_behavior
+        # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
+        attr_accessor :tiers
+        # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
+        attr_accessor :unit_amount
+        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+        attr_accessor :unit_amount_decimal
+
+        def initialize(
+          custom_unit_amount: nil,
+          tax_behavior: nil,
+          tiers: nil,
+          unit_amount: nil,
+          unit_amount_decimal: nil
+        )
+          @custom_unit_amount = custom_unit_amount
+          @tax_behavior = tax_behavior
+          @tiers = tiers
+          @unit_amount = unit_amount
+          @unit_amount_decimal = unit_amount_decimal
+        end
+      end
+
+      class CustomUnitAmount < Stripe::RequestParams
+        # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
+        attr_accessor :enabled
+        # The maximum unit amount the customer can specify for this item.
+        attr_accessor :maximum
+        # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
+        attr_accessor :minimum
+        # The starting unit amount which can be updated by the customer.
+        attr_accessor :preset
+
+        def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
+          @enabled = enabled
+          @maximum = maximum
+          @minimum = minimum
+          @preset = preset
+        end
+      end
+
+      class ProductData < Stripe::RequestParams
+        # Whether the product is currently available for purchase. Defaults to `true`.
+        attr_accessor :active
+        # The identifier for the product. Must be unique. If not provided, an identifier will be randomly generated.
+        attr_accessor :id
+        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+        attr_accessor :metadata
+        # The product's name, meant to be displayable to the customer.
+        attr_accessor :name
+        # An arbitrary string to be displayed on your customer's credit card or bank statement. While most banks display this information consistently, some may display it incorrectly or not at all.
+        #
+        # This may be up to 22 characters. The statement description may not include `<`, `>`, `\`, `"`, `'` characters, and will appear on your customer's statement in capital letters. Non-ASCII characters are automatically stripped.
+        attr_accessor :statement_descriptor
+        # A [tax code](https://stripe.com/docs/tax/tax-categories) ID.
+        attr_accessor :tax_code
+        # A label that represents units of this product. When set, this will be included in customers' receipts, invoices, Checkout, and the customer portal.
+        attr_accessor :unit_label
+
+        def initialize(
+          active: nil,
+          id: nil,
+          metadata: nil,
+          name: nil,
+          statement_descriptor: nil,
+          tax_code: nil,
+          unit_label: nil
+        )
+          @active = active
+          @id = id
+          @metadata = metadata
+          @name = name
+          @statement_descriptor = statement_descriptor
+          @tax_code = tax_code
+          @unit_label = unit_label
+        end
+      end
+
+      class Recurring < Stripe::RequestParams
+        # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
+        attr_accessor :aggregate_usage
+        # Specifies billing frequency. Either `day`, `week`, `month` or `year`.
+        attr_accessor :interval
+        # The number of intervals between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of three years interval allowed (3 years, 36 months, or 156 weeks).
+        attr_accessor :interval_count
+        # The meter tracking the usage of a metered price
+        attr_accessor :meter
+        # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
+        attr_accessor :trial_period_days
+        # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
+        attr_accessor :usage_type
+
+        def initialize(
+          aggregate_usage: nil,
+          interval: nil,
+          interval_count: nil,
+          meter: nil,
+          trial_period_days: nil,
+          usage_type: nil
+        )
+          @aggregate_usage = aggregate_usage
+          @interval = interval
+          @interval_count = interval_count
+          @meter = meter
+          @trial_period_days = trial_period_days
+          @usage_type = usage_type
+        end
+      end
+
+      class Tier < Stripe::RequestParams
+        # The flat billing amount for an entire tier, regardless of the number of units in the tier.
+        attr_accessor :flat_amount
+        # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
+        attr_accessor :flat_amount_decimal
+        # The per unit billing amount for each individual unit for which this tier applies.
+        attr_accessor :unit_amount
+        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+        attr_accessor :unit_amount_decimal
+        # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
+        attr_accessor :up_to
+
+        def initialize(
+          flat_amount: nil,
+          flat_amount_decimal: nil,
+          unit_amount: nil,
+          unit_amount_decimal: nil,
+          up_to: nil
+        )
+          @flat_amount = flat_amount
+          @flat_amount_decimal = flat_amount_decimal
+          @unit_amount = unit_amount
+          @unit_amount_decimal = unit_amount_decimal
+          @up_to = up_to
+        end
+      end
+
+      class TransformQuantity < Stripe::RequestParams
+        # Divide usage by this number.
+        attr_accessor :divide_by
+        # After division, either round the result `up` or `down`.
+        attr_accessor :round
+
+        def initialize(divide_by: nil, round: nil)
+          @divide_by = divide_by
+          @round = round
+        end
+      end
+      # Whether the price can be used for new purchases. Defaults to `true`.
+      attr_accessor :active
+      # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
+      attr_accessor :billing_scheme
+      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency
+      # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency_options
+      # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
+      attr_accessor :custom_unit_amount
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
+      attr_accessor :lookup_key
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+      # A brief description of the price, hidden from customers.
+      attr_accessor :nickname
+      # The ID of the product that this price will belong to.
+      attr_accessor :product
+      # These fields can be used to create a new product that this price will belong to.
+      attr_accessor :product_data
+      # The recurring components of a price such as `interval` and `usage_type`.
+      attr_accessor :recurring
+      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+      attr_accessor :tax_behavior
+      # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
+      attr_accessor :tiers
+      # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price, in `graduated` tiering pricing can successively change as the quantity grows.
+      attr_accessor :tiers_mode
+      # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
+      attr_accessor :transfer_lookup_key
+      # Apply a transformation to the reported usage or set quantity before computing the billed price. Cannot be combined with `tiers`.
+      attr_accessor :transform_quantity
+      # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge. One of `unit_amount`, `unit_amount_decimal`, or `custom_unit_amount` is required, unless `billing_scheme=tiered`.
+      attr_accessor :unit_amount
+      # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+      attr_accessor :unit_amount_decimal
+
+      def initialize(
+        active: nil,
+        billing_scheme: nil,
+        currency: nil,
+        currency_options: nil,
+        custom_unit_amount: nil,
+        expand: nil,
+        lookup_key: nil,
+        metadata: nil,
+        nickname: nil,
+        product: nil,
+        product_data: nil,
+        recurring: nil,
+        tax_behavior: nil,
+        tiers: nil,
+        tiers_mode: nil,
+        transfer_lookup_key: nil,
+        transform_quantity: nil,
+        unit_amount: nil,
+        unit_amount_decimal: nil
+      )
+        @active = active
+        @billing_scheme = billing_scheme
+        @currency = currency
+        @currency_options = currency_options
+        @custom_unit_amount = custom_unit_amount
+        @expand = expand
+        @lookup_key = lookup_key
+        @metadata = metadata
+        @nickname = nickname
+        @product = product
+        @product_data = product_data
+        @recurring = recurring
+        @tax_behavior = tax_behavior
+        @tiers = tiers
+        @tiers_mode = tiers_mode
+        @transfer_lookup_key = transfer_lookup_key
+        @transform_quantity = transform_quantity
+        @unit_amount = unit_amount
+        @unit_amount_decimal = unit_amount_decimal
+      end
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class UpdateParams < Stripe::RequestParams
+      class CurrencyOptions < Stripe::RequestParams
+        class CustomUnitAmount < Stripe::RequestParams
+          # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
+          attr_accessor :enabled
+          # The maximum unit amount the customer can specify for this item.
+          attr_accessor :maximum
+          # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
+          attr_accessor :minimum
+          # The starting unit amount which can be updated by the customer.
+          attr_accessor :preset
+
+          def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
+            @enabled = enabled
+            @maximum = maximum
+            @minimum = minimum
+            @preset = preset
+          end
+        end
+
+        class Tier < Stripe::RequestParams
+          # The flat billing amount for an entire tier, regardless of the number of units in the tier.
+          attr_accessor :flat_amount
+          # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
+          attr_accessor :flat_amount_decimal
+          # The per unit billing amount for each individual unit for which this tier applies.
+          attr_accessor :unit_amount
+          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+          attr_accessor :unit_amount_decimal
+          # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
+          attr_accessor :up_to
+
+          def initialize(
+            flat_amount: nil,
+            flat_amount_decimal: nil,
+            unit_amount: nil,
+            unit_amount_decimal: nil,
+            up_to: nil
+          )
+            @flat_amount = flat_amount
+            @flat_amount_decimal = flat_amount_decimal
+            @unit_amount = unit_amount
+            @unit_amount_decimal = unit_amount_decimal
+            @up_to = up_to
+          end
+        end
+        # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
+        attr_accessor :custom_unit_amount
+        # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+        attr_accessor :tax_behavior
+        # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
+        attr_accessor :tiers
+        # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
+        attr_accessor :unit_amount
+        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
+        attr_accessor :unit_amount_decimal
+
+        def initialize(
+          custom_unit_amount: nil,
+          tax_behavior: nil,
+          tiers: nil,
+          unit_amount: nil,
+          unit_amount_decimal: nil
+        )
+          @custom_unit_amount = custom_unit_amount
+          @tax_behavior = tax_behavior
+          @tiers = tiers
+          @unit_amount = unit_amount
+          @unit_amount_decimal = unit_amount_decimal
+        end
+      end
+
+      class MigrateTo < Stripe::RequestParams
+        # The behavior controlling the point in the subscription lifecycle after which to migrate the price. Currently must be `at_cycle_end`.
+        attr_accessor :behavior
+        # The time after which subscriptions should start using the new price.
+        attr_accessor :effective_after
+        # The ID of the price object.
+        attr_accessor :price
+
+        def initialize(behavior: nil, effective_after: nil, price: nil)
+          @behavior = behavior
+          @effective_after = effective_after
+          @price = price
+        end
+      end
+      # Whether the price can be used for new purchases. Defaults to `true`.
+      attr_accessor :active
+      # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency_options
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
+      attr_accessor :lookup_key
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+      # If specified, subscriptions using this price will be updated to use the new referenced price.
+      attr_accessor :migrate_to
+      # A brief description of the price, hidden from customers.
+      attr_accessor :nickname
+      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+      attr_accessor :tax_behavior
+      # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
+      attr_accessor :transfer_lookup_key
+
+      def initialize(
+        active: nil,
+        currency_options: nil,
+        expand: nil,
+        lookup_key: nil,
+        metadata: nil,
+        migrate_to: nil,
+        nickname: nil,
+        tax_behavior: nil,
+        transfer_lookup_key: nil
+      )
+        @active = active
+        @currency_options = currency_options
+        @expand = expand
+        @lookup_key = lookup_key
+        @metadata = metadata
+        @migrate_to = migrate_to
+        @nickname = nickname
+        @tax_behavior = tax_behavior
+        @transfer_lookup_key = transfer_lookup_key
+      end
+    end
+
+    class SearchParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for pagination across multiple pages of results. Don't include this parameter on the first call. Use the next_page value returned in a previous response to request subsequent results.
+      attr_accessor :page
+      # The search query string. See [search query language](https://stripe.com/docs/search#search-query-language) and the list of supported [query fields for prices](https://stripe.com/docs/search#query-fields-for-prices).
+      attr_accessor :query
+
+      def initialize(expand: nil, limit: nil, page: nil, query: nil)
+        @expand = expand
+        @limit = limit
+        @page = page
+        @query = query
+      end
+    end
+    # Whether the price can be used for new purchases.
+    attr_reader :active
+    # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
+    attr_reader :billing_scheme
+    # Time at which the object was created. Measured in seconds since the Unix epoch.
+    attr_reader :created
+    # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+    attr_reader :currency
+    # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
+    attr_reader :currency_options
+    # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
+    attr_reader :custom_unit_amount
+    # Unique identifier for the object.
+    attr_reader :id
+    # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+    attr_reader :livemode
+    # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
+    attr_reader :lookup_key
+    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+    attr_reader :metadata
+    # Subscriptions using this price will be migrated to use the new referenced price.
+    attr_reader :migrate_to
+    # A brief description of the price, hidden from customers.
+    attr_reader :nickname
+    # String representing the object's type. Objects of the same type share the same value.
+    attr_reader :object
+    # The ID of the product this price is associated with.
+    attr_reader :product
+    # The recurring components of a price such as `interval` and `usage_type`.
+    attr_reader :recurring
+    # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
+    attr_reader :tax_behavior
+    # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
+    attr_reader :tiers
+    # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price. In `graduated` tiering, pricing can change as the quantity grows.
+    attr_reader :tiers_mode
+    # Apply a transformation to the reported usage or set quantity before computing the amount billed. Cannot be combined with `tiers`.
+    attr_reader :transform_quantity
+    # One of `one_time` or `recurring` depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
+    attr_reader :type
+    # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
+    attr_reader :unit_amount
+    # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
+    attr_reader :unit_amount_decimal
+    # Always true for a deleted object
+    attr_reader :deleted
+
     # Creates a new price for an existing product. The price can be recurring or one-time.
     def self.create(params = {}, opts = {})
       request_stripe_object(method: :post, path: "/v1/prices", params: params, opts: opts)
@@ -38,10 +687,10 @@ module Stripe
     end
 
     # Updates the specified price by setting the values of the parameters passed. Any parameters not provided are left unchanged.
-    def self.update(id, params = {}, opts = {})
+    def self.update(price, params = {}, opts = {})
       request_stripe_object(
         method: :post,
-        path: format("/v1/prices/%<id>s", { id: CGI.escape(id) }),
+        path: format("/v1/prices/%<price>s", { price: CGI.escape(price) }),
         params: params,
         opts: opts
       )