stripe 13.4.0 → 13.5.0.pre.beta.1

data/lib/stripe/services/source_service.rb

@@ -10,6 +10,607 @@ module Stripe
       @transactions = Stripe::SourceTransactionService.new(@requestor)
     end
 
+    class DetachParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # The client secret of the source. Required if a publishable key is used to retrieve the source.
+      attr_accessor :client_secret
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(client_secret: nil, expand: nil)
+        @client_secret = client_secret
+        @expand = expand
+      end
+    end
+
+    class UpdateParams < Stripe::RequestParams
+      class Mandate < Stripe::RequestParams
+        class Acceptance < Stripe::RequestParams
+          class Offline < Stripe::RequestParams
+            # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
+            attr_accessor :contact_email
+
+            def initialize(contact_email: nil)
+              @contact_email = contact_email
+            end
+          end
+
+          class Online < Stripe::RequestParams
+            # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+            attr_accessor :date
+            # The IP address from which the mandate was accepted or refused by the customer.
+            attr_accessor :ip
+            # The user agent of the browser from which the mandate was accepted or refused by the customer.
+            attr_accessor :user_agent
+
+            def initialize(date: nil, ip: nil, user_agent: nil)
+              @date = date
+              @ip = ip
+              @user_agent = user_agent
+            end
+          end
+          # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+          attr_accessor :date
+          # The IP address from which the mandate was accepted or refused by the customer.
+          attr_accessor :ip
+          # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
+          attr_accessor :offline
+          # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
+          attr_accessor :online
+          # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
+          attr_accessor :status
+          # The type of acceptance information included with the mandate. Either `online` or `offline`
+          attr_accessor :type
+          # The user agent of the browser from which the mandate was accepted or refused by the customer.
+          attr_accessor :user_agent
+
+          def initialize(
+            date: nil,
+            ip: nil,
+            offline: nil,
+            online: nil,
+            status: nil,
+            type: nil,
+            user_agent: nil
+          )
+            @date = date
+            @ip = ip
+            @offline = offline
+            @online = online
+            @status = status
+            @type = type
+            @user_agent = user_agent
+          end
+        end
+        # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
+        attr_accessor :acceptance
+        # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
+        attr_accessor :amount
+        # The currency specified by the mandate. (Must match `currency` of the source)
+        attr_accessor :currency
+        # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
+        attr_accessor :interval
+        # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
+        attr_accessor :notification_method
+
+        def initialize(
+          acceptance: nil,
+          amount: nil,
+          currency: nil,
+          interval: nil,
+          notification_method: nil
+        )
+          @acceptance = acceptance
+          @amount = amount
+          @currency = currency
+          @interval = interval
+          @notification_method = notification_method
+        end
+      end
+
+      class Owner < Stripe::RequestParams
+        class Address < Stripe::RequestParams
+          # City, district, suburb, town, or village.
+          attr_accessor :city
+          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+          attr_accessor :country
+          # Address line 1 (e.g., street, PO Box, or company name).
+          attr_accessor :line1
+          # Address line 2 (e.g., apartment, suite, unit, or building).
+          attr_accessor :line2
+          # ZIP or postal code.
+          attr_accessor :postal_code
+          # State, county, province, or region.
+          attr_accessor :state
+
+          def initialize(
+            city: nil,
+            country: nil,
+            line1: nil,
+            line2: nil,
+            postal_code: nil,
+            state: nil
+          )
+            @city = city
+            @country = country
+            @line1 = line1
+            @line2 = line2
+            @postal_code = postal_code
+            @state = state
+          end
+        end
+        # Owner's address.
+        attr_accessor :address
+        # Owner's email address.
+        attr_accessor :email
+        # Owner's full name.
+        attr_accessor :name
+        # Owner's phone number.
+        attr_accessor :phone
+
+        def initialize(address: nil, email: nil, name: nil, phone: nil)
+          @address = address
+          @email = email
+          @name = name
+          @phone = phone
+        end
+      end
+
+      class SourceOrder < Stripe::RequestParams
+        class Item < Stripe::RequestParams
+          # Attribute for param field amount
+          attr_accessor :amount
+          # Attribute for param field currency
+          attr_accessor :currency
+          # Attribute for param field description
+          attr_accessor :description
+          # The ID of the SKU being ordered.
+          attr_accessor :parent
+          # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
+          attr_accessor :quantity
+          # Attribute for param field type
+          attr_accessor :type
+
+          def initialize(
+            amount: nil,
+            currency: nil,
+            description: nil,
+            parent: nil,
+            quantity: nil,
+            type: nil
+          )
+            @amount = amount
+            @currency = currency
+            @description = description
+            @parent = parent
+            @quantity = quantity
+            @type = type
+          end
+        end
+
+        class Shipping < Stripe::RequestParams
+          class Address < Stripe::RequestParams
+            # City, district, suburb, town, or village.
+            attr_accessor :city
+            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+            attr_accessor :country
+            # Address line 1 (e.g., street, PO Box, or company name).
+            attr_accessor :line1
+            # Address line 2 (e.g., apartment, suite, unit, or building).
+            attr_accessor :line2
+            # ZIP or postal code.
+            attr_accessor :postal_code
+            # State, county, province, or region.
+            attr_accessor :state
+
+            def initialize(
+              city: nil,
+              country: nil,
+              line1: nil,
+              line2: nil,
+              postal_code: nil,
+              state: nil
+            )
+              @city = city
+              @country = country
+              @line1 = line1
+              @line2 = line2
+              @postal_code = postal_code
+              @state = state
+            end
+          end
+          # Shipping address.
+          attr_accessor :address
+          # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
+          attr_accessor :carrier
+          # Recipient name.
+          attr_accessor :name
+          # Recipient phone (including extension).
+          attr_accessor :phone
+          # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
+          attr_accessor :tracking_number
+
+          def initialize(address: nil, carrier: nil, name: nil, phone: nil, tracking_number: nil)
+            @address = address
+            @carrier = carrier
+            @name = name
+            @phone = phone
+            @tracking_number = tracking_number
+          end
+        end
+        # List of items constituting the order.
+        attr_accessor :items
+        # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
+        attr_accessor :shipping
+
+        def initialize(items: nil, shipping: nil)
+          @items = items
+          @shipping = shipping
+        end
+      end
+      # Amount associated with the source.
+      attr_accessor :amount
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
+      attr_accessor :mandate
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+      # Information about the owner of the payment instrument that may be used or required by particular source types.
+      attr_accessor :owner
+      # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
+      attr_accessor :source_order
+
+      def initialize(
+        amount: nil,
+        expand: nil,
+        mandate: nil,
+        metadata: nil,
+        owner: nil,
+        source_order: nil
+      )
+        @amount = amount
+        @expand = expand
+        @mandate = mandate
+        @metadata = metadata
+        @owner = owner
+        @source_order = source_order
+      end
+    end
+
+    class CreateParams < Stripe::RequestParams
+      class Mandate < Stripe::RequestParams
+        class Acceptance < Stripe::RequestParams
+          class Offline < Stripe::RequestParams
+            # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
+            attr_accessor :contact_email
+
+            def initialize(contact_email: nil)
+              @contact_email = contact_email
+            end
+          end
+
+          class Online < Stripe::RequestParams
+            # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+            attr_accessor :date
+            # The IP address from which the mandate was accepted or refused by the customer.
+            attr_accessor :ip
+            # The user agent of the browser from which the mandate was accepted or refused by the customer.
+            attr_accessor :user_agent
+
+            def initialize(date: nil, ip: nil, user_agent: nil)
+              @date = date
+              @ip = ip
+              @user_agent = user_agent
+            end
+          end
+          # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+          attr_accessor :date
+          # The IP address from which the mandate was accepted or refused by the customer.
+          attr_accessor :ip
+          # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
+          attr_accessor :offline
+          # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
+          attr_accessor :online
+          # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
+          attr_accessor :status
+          # The type of acceptance information included with the mandate. Either `online` or `offline`
+          attr_accessor :type
+          # The user agent of the browser from which the mandate was accepted or refused by the customer.
+          attr_accessor :user_agent
+
+          def initialize(
+            date: nil,
+            ip: nil,
+            offline: nil,
+            online: nil,
+            status: nil,
+            type: nil,
+            user_agent: nil
+          )
+            @date = date
+            @ip = ip
+            @offline = offline
+            @online = online
+            @status = status
+            @type = type
+            @user_agent = user_agent
+          end
+        end
+        # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
+        attr_accessor :acceptance
+        # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
+        attr_accessor :amount
+        # The currency specified by the mandate. (Must match `currency` of the source)
+        attr_accessor :currency
+        # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
+        attr_accessor :interval
+        # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
+        attr_accessor :notification_method
+
+        def initialize(
+          acceptance: nil,
+          amount: nil,
+          currency: nil,
+          interval: nil,
+          notification_method: nil
+        )
+          @acceptance = acceptance
+          @amount = amount
+          @currency = currency
+          @interval = interval
+          @notification_method = notification_method
+        end
+      end
+
+      class Owner < Stripe::RequestParams
+        class Address < Stripe::RequestParams
+          # City, district, suburb, town, or village.
+          attr_accessor :city
+          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+          attr_accessor :country
+          # Address line 1 (e.g., street, PO Box, or company name).
+          attr_accessor :line1
+          # Address line 2 (e.g., apartment, suite, unit, or building).
+          attr_accessor :line2
+          # ZIP or postal code.
+          attr_accessor :postal_code
+          # State, county, province, or region.
+          attr_accessor :state
+
+          def initialize(
+            city: nil,
+            country: nil,
+            line1: nil,
+            line2: nil,
+            postal_code: nil,
+            state: nil
+          )
+            @city = city
+            @country = country
+            @line1 = line1
+            @line2 = line2
+            @postal_code = postal_code
+            @state = state
+          end
+        end
+        # Owner's address.
+        attr_accessor :address
+        # Owner's email address.
+        attr_accessor :email
+        # Owner's full name.
+        attr_accessor :name
+        # Owner's phone number.
+        attr_accessor :phone
+
+        def initialize(address: nil, email: nil, name: nil, phone: nil)
+          @address = address
+          @email = email
+          @name = name
+          @phone = phone
+        end
+      end
+
+      class Receiver < Stripe::RequestParams
+        # The method Stripe should use to request information needed to process a refund or mispayment. Either `email` (an email is sent directly to the customer) or `manual` (a `source.refund_attributes_required` event is sent to your webhooks endpoint). Refer to each payment method's documentation to learn which refund attributes may be required.
+        attr_accessor :refund_attributes_method
+
+        def initialize(refund_attributes_method: nil)
+          @refund_attributes_method = refund_attributes_method
+        end
+      end
+
+      class Redirect < Stripe::RequestParams
+        # The URL you provide to redirect the customer back to you after they authenticated their payment. It can use your application URI scheme in the context of a mobile application.
+        attr_accessor :return_url
+
+        def initialize(return_url: nil)
+          @return_url = return_url
+        end
+      end
+
+      class SourceOrder < Stripe::RequestParams
+        class Item < Stripe::RequestParams
+          # Attribute for param field amount
+          attr_accessor :amount
+          # Attribute for param field currency
+          attr_accessor :currency
+          # Attribute for param field description
+          attr_accessor :description
+          # The ID of the SKU being ordered.
+          attr_accessor :parent
+          # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
+          attr_accessor :quantity
+          # Attribute for param field type
+          attr_accessor :type
+
+          def initialize(
+            amount: nil,
+            currency: nil,
+            description: nil,
+            parent: nil,
+            quantity: nil,
+            type: nil
+          )
+            @amount = amount
+            @currency = currency
+            @description = description
+            @parent = parent
+            @quantity = quantity
+            @type = type
+          end
+        end
+
+        class Shipping < Stripe::RequestParams
+          class Address < Stripe::RequestParams
+            # City, district, suburb, town, or village.
+            attr_accessor :city
+            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+            attr_accessor :country
+            # Address line 1 (e.g., street, PO Box, or company name).
+            attr_accessor :line1
+            # Address line 2 (e.g., apartment, suite, unit, or building).
+            attr_accessor :line2
+            # ZIP or postal code.
+            attr_accessor :postal_code
+            # State, county, province, or region.
+            attr_accessor :state
+
+            def initialize(
+              city: nil,
+              country: nil,
+              line1: nil,
+              line2: nil,
+              postal_code: nil,
+              state: nil
+            )
+              @city = city
+              @country = country
+              @line1 = line1
+              @line2 = line2
+              @postal_code = postal_code
+              @state = state
+            end
+          end
+          # Shipping address.
+          attr_accessor :address
+          # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
+          attr_accessor :carrier
+          # Recipient name.
+          attr_accessor :name
+          # Recipient phone (including extension).
+          attr_accessor :phone
+          # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
+          attr_accessor :tracking_number
+
+          def initialize(address: nil, carrier: nil, name: nil, phone: nil, tracking_number: nil)
+            @address = address
+            @carrier = carrier
+            @name = name
+            @phone = phone
+            @tracking_number = tracking_number
+          end
+        end
+        # List of items constituting the order.
+        attr_accessor :items
+        # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
+        attr_accessor :shipping
+
+        def initialize(items: nil, shipping: nil)
+          @items = items
+          @shipping = shipping
+        end
+      end
+      # Amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. Not supported for `receiver` type sources, where charge amount may not be specified until funds land.
+      attr_accessor :amount
+      # Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready.
+      attr_accessor :currency
+      # The `Customer` to whom the original source is attached to. Must be set when the original source is not a `Source` (e.g., `Card`).
+      attr_accessor :customer
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # The authentication `flow` of the source to create. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. It is generally inferred unless a type supports multiple flows.
+      attr_accessor :flow
+      # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
+      attr_accessor :mandate
+      # Attribute for param field metadata
+      attr_accessor :metadata
+      # The source to share.
+      attr_accessor :original_source
+      # Information about the owner of the payment instrument that may be used or required by particular source types.
+      attr_accessor :owner
+      # Optional parameters for the receiver flow. Can be set only if the source is a receiver (`flow` is `receiver`).
+      attr_accessor :receiver
+      # Parameters required for the redirect flow. Required if the source is authenticated by a redirect (`flow` is `redirect`).
+      attr_accessor :redirect
+      # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
+      attr_accessor :source_order
+      # An arbitrary string to be displayed on your customer's statement. As an example, if your website is `RunClub` and the item you're charging for is a race ticket, you may want to specify a `statement_descriptor` of `RunClub 5K race ticket.` While many payment types will display this information, some may not display it at all.
+      attr_accessor :statement_descriptor
+      # An optional token used to create the source. When passed, token properties will override source parameters.
+      attr_accessor :token
+      # The `type` of the source to create. Required unless `customer` and `original_source` are specified (see the [Cloning card Sources](https://stripe.com/docs/sources/connect#cloning-card-sources) guide)
+      attr_accessor :type
+      # Attribute for param field usage
+      attr_accessor :usage
+
+      def initialize(
+        amount: nil,
+        currency: nil,
+        customer: nil,
+        expand: nil,
+        flow: nil,
+        mandate: nil,
+        metadata: nil,
+        original_source: nil,
+        owner: nil,
+        receiver: nil,
+        redirect: nil,
+        source_order: nil,
+        statement_descriptor: nil,
+        token: nil,
+        type: nil,
+        usage: nil
+      )
+        @amount = amount
+        @currency = currency
+        @customer = customer
+        @expand = expand
+        @flow = flow
+        @mandate = mandate
+        @metadata = metadata
+        @original_source = original_source
+        @owner = owner
+        @receiver = receiver
+        @redirect = redirect
+        @source_order = source_order
+        @statement_descriptor = statement_descriptor
+        @token = token
+        @type = type
+        @usage = usage
+      end
+    end
+
+    class VerifyParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # The values needed to verify the source.
+      attr_accessor :values
+
+      def initialize(expand: nil, values: nil)
+        @expand = expand
+        @values = values
+      end
+    end
+
     # Creates a new source object.
     def create(params = {}, opts = {})
       request(method: :post, path: "/v1/sources", params: params, opts: opts, base_address: :api)

data/lib/stripe/services/source_transaction_service.rb

@@ -3,6 +3,24 @@
 
 module Stripe
   class SourceTransactionService < StripeService
+    class ListParams < Stripe::RequestParams
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+
     # List source transactions for a given source.
     def list(source, params = {}, opts = {})
       request(