stripe 13.4.0.pre.beta.4 → 13.4.1

data/lib/stripe/resources/price.rb

@@ -19,655 +19,6 @@ module Stripe
       "price"
     end
 
-    class CurrencyOptions < Stripe::StripeObject
-      class CustomUnitAmount < Stripe::StripeObject
-        # The maximum unit amount the customer can specify for this item.
-        attr_reader :maximum
-        # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
-        attr_reader :minimum
-        # The starting unit amount which can be updated by the customer.
-        attr_reader :preset
-      end
-
-      class Tier < Stripe::StripeObject
-        # Price for the entire tier.
-        attr_reader :flat_amount
-        # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
-        attr_reader :flat_amount_decimal
-        # Per unit price for units relevant to the tier.
-        attr_reader :unit_amount
-        # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
-        attr_reader :unit_amount_decimal
-        # Up to and including to this quantity will be contained in the tier.
-        attr_reader :up_to
-      end
-      # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
-      attr_reader :custom_unit_amount
-      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-      attr_reader :tax_behavior
-      # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
-      attr_reader :tiers
-      # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
-      attr_reader :unit_amount
-      # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
-      attr_reader :unit_amount_decimal
-    end
-
-    class CustomUnitAmount < Stripe::StripeObject
-      # The maximum unit amount the customer can specify for this item.
-      attr_reader :maximum
-      # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
-      attr_reader :minimum
-      # The starting unit amount which can be updated by the customer.
-      attr_reader :preset
-    end
-
-    class MigrateTo < Stripe::StripeObject
-      # The behavior controlling at what point in the subscription lifecycle to migrate the price
-      attr_reader :behavior
-      # The unix timestamp after at which subscriptions will start to migrate to the new price.
-      attr_reader :effective_after
-      # The id of the price being migrated to
-      attr_reader :price
-    end
-
-    class Recurring < Stripe::StripeObject
-      # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
-      attr_reader :aggregate_usage
-      # The frequency at which a subscription is billed. One of `day`, `week`, `month` or `year`.
-      attr_reader :interval
-      # The number of intervals (specified in the `interval` attribute) between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months.
-      attr_reader :interval_count
-      # The meter tracking the usage of a metered price
-      attr_reader :meter
-      # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
-      attr_reader :trial_period_days
-      # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
-      attr_reader :usage_type
-    end
-
-    class Tier < Stripe::StripeObject
-      # Price for the entire tier.
-      attr_reader :flat_amount
-      # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
-      attr_reader :flat_amount_decimal
-      # Per unit price for units relevant to the tier.
-      attr_reader :unit_amount
-      # Same as `unit_amount`, but contains a decimal value with at most 12 decimal places.
-      attr_reader :unit_amount_decimal
-      # Up to and including to this quantity will be contained in the tier.
-      attr_reader :up_to
-    end
-
-    class TransformQuantity < Stripe::StripeObject
-      # Divide usage by this number.
-      attr_reader :divide_by
-      # After division, either round the result `up` or `down`.
-      attr_reader :round
-    end
-
-    class ListParams < Stripe::RequestParams
-      class Created < Stripe::RequestParams
-        # Minimum value to filter by (exclusive)
-        attr_accessor :gt
-        # Minimum value to filter by (inclusive)
-        attr_accessor :gte
-        # Maximum value to filter by (exclusive)
-        attr_accessor :lt
-        # Maximum value to filter by (inclusive)
-        attr_accessor :lte
-
-        def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
-          @gt = gt
-          @gte = gte
-          @lt = lt
-          @lte = lte
-        end
-      end
-
-      class Recurring < Stripe::RequestParams
-        # Filter by billing frequency. Either `day`, `week`, `month` or `year`.
-        attr_accessor :interval
-        # Filter by the price's meter.
-        attr_accessor :meter
-        # Filter by the usage type for this price. Can be either `metered` or `licensed`.
-        attr_accessor :usage_type
-
-        def initialize(interval: nil, meter: nil, usage_type: nil)
-          @interval = interval
-          @meter = meter
-          @usage_type = usage_type
-        end
-      end
-      # Only return prices that are active or inactive (e.g., pass `false` to list all inactive prices).
-      attr_accessor :active
-      # A filter on the list, based on the object `created` field. The value can be a string with an integer Unix timestamp, or it can be a dictionary with a number of different query options.
-      attr_accessor :created
-      # Only return prices for the given currency.
-      attr_accessor :currency
-      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      attr_accessor :ending_before
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # Only return the price with these lookup_keys, if any exist. You can specify up to 10 lookup_keys.
-      attr_accessor :lookup_keys
-      # Only return prices for the given product.
-      attr_accessor :product
-      # Only return prices with these recurring fields.
-      attr_accessor :recurring
-      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      attr_accessor :starting_after
-      # Only return prices of type `recurring` or `one_time`.
-      attr_accessor :type
-
-      def initialize(
-        active: nil,
-        created: nil,
-        currency: nil,
-        ending_before: nil,
-        expand: nil,
-        limit: nil,
-        lookup_keys: nil,
-        product: nil,
-        recurring: nil,
-        starting_after: nil,
-        type: nil
-      )
-        @active = active
-        @created = created
-        @currency = currency
-        @ending_before = ending_before
-        @expand = expand
-        @limit = limit
-        @lookup_keys = lookup_keys
-        @product = product
-        @recurring = recurring
-        @starting_after = starting_after
-        @type = type
-      end
-    end
-
-    class CreateParams < Stripe::RequestParams
-      class CurrencyOptions < Stripe::RequestParams
-        class CustomUnitAmount < Stripe::RequestParams
-          # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
-          attr_accessor :enabled
-          # The maximum unit amount the customer can specify for this item.
-          attr_accessor :maximum
-          # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
-          attr_accessor :minimum
-          # The starting unit amount which can be updated by the customer.
-          attr_accessor :preset
-
-          def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
-            @enabled = enabled
-            @maximum = maximum
-            @minimum = minimum
-            @preset = preset
-          end
-        end
-
-        class Tier < Stripe::RequestParams
-          # The flat billing amount for an entire tier, regardless of the number of units in the tier.
-          attr_accessor :flat_amount
-          # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
-          attr_accessor :flat_amount_decimal
-          # The per unit billing amount for each individual unit for which this tier applies.
-          attr_accessor :unit_amount
-          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-          attr_accessor :unit_amount_decimal
-          # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
-          attr_accessor :up_to
-
-          def initialize(
-            flat_amount: nil,
-            flat_amount_decimal: nil,
-            unit_amount: nil,
-            unit_amount_decimal: nil,
-            up_to: nil
-          )
-            @flat_amount = flat_amount
-            @flat_amount_decimal = flat_amount_decimal
-            @unit_amount = unit_amount
-            @unit_amount_decimal = unit_amount_decimal
-            @up_to = up_to
-          end
-        end
-        # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
-        attr_accessor :custom_unit_amount
-        # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-        attr_accessor :tax_behavior
-        # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
-        attr_accessor :tiers
-        # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
-        attr_accessor :unit_amount
-        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-        attr_accessor :unit_amount_decimal
-
-        def initialize(
-          custom_unit_amount: nil,
-          tax_behavior: nil,
-          tiers: nil,
-          unit_amount: nil,
-          unit_amount_decimal: nil
-        )
-          @custom_unit_amount = custom_unit_amount
-          @tax_behavior = tax_behavior
-          @tiers = tiers
-          @unit_amount = unit_amount
-          @unit_amount_decimal = unit_amount_decimal
-        end
-      end
-
-      class CustomUnitAmount < Stripe::RequestParams
-        # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
-        attr_accessor :enabled
-        # The maximum unit amount the customer can specify for this item.
-        attr_accessor :maximum
-        # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
-        attr_accessor :minimum
-        # The starting unit amount which can be updated by the customer.
-        attr_accessor :preset
-
-        def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
-          @enabled = enabled
-          @maximum = maximum
-          @minimum = minimum
-          @preset = preset
-        end
-      end
-
-      class ProductData < Stripe::RequestParams
-        # Whether the product is currently available for purchase. Defaults to `true`.
-        attr_accessor :active
-        # The identifier for the product. Must be unique. If not provided, an identifier will be randomly generated.
-        attr_accessor :id
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-        # The product's name, meant to be displayable to the customer.
-        attr_accessor :name
-        # An arbitrary string to be displayed on your customer's credit card or bank statement. While most banks display this information consistently, some may display it incorrectly or not at all.
-        #
-        # This may be up to 22 characters. The statement description may not include `<`, `>`, `\`, `"`, `'` characters, and will appear on your customer's statement in capital letters. Non-ASCII characters are automatically stripped.
-        attr_accessor :statement_descriptor
-        # A [tax code](https://stripe.com/docs/tax/tax-categories) ID.
-        attr_accessor :tax_code
-        # A label that represents units of this product. When set, this will be included in customers' receipts, invoices, Checkout, and the customer portal.
-        attr_accessor :unit_label
-
-        def initialize(
-          active: nil,
-          id: nil,
-          metadata: nil,
-          name: nil,
-          statement_descriptor: nil,
-          tax_code: nil,
-          unit_label: nil
-        )
-          @active = active
-          @id = id
-          @metadata = metadata
-          @name = name
-          @statement_descriptor = statement_descriptor
-          @tax_code = tax_code
-          @unit_label = unit_label
-        end
-      end
-
-      class Recurring < Stripe::RequestParams
-        # Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`.
-        attr_accessor :aggregate_usage
-        # Specifies billing frequency. Either `day`, `week`, `month` or `year`.
-        attr_accessor :interval
-        # The number of intervals between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of three years interval allowed (3 years, 36 months, or 156 weeks).
-        attr_accessor :interval_count
-        # The meter tracking the usage of a metered price
-        attr_accessor :meter
-        # Default number of trial days when subscribing a customer to this price using [`trial_from_plan=true`](https://stripe.com/docs/api#create_subscription-trial_from_plan).
-        attr_accessor :trial_period_days
-        # Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`.
-        attr_accessor :usage_type
-
-        def initialize(
-          aggregate_usage: nil,
-          interval: nil,
-          interval_count: nil,
-          meter: nil,
-          trial_period_days: nil,
-          usage_type: nil
-        )
-          @aggregate_usage = aggregate_usage
-          @interval = interval
-          @interval_count = interval_count
-          @meter = meter
-          @trial_period_days = trial_period_days
-          @usage_type = usage_type
-        end
-      end
-
-      class Tier < Stripe::RequestParams
-        # The flat billing amount for an entire tier, regardless of the number of units in the tier.
-        attr_accessor :flat_amount
-        # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
-        attr_accessor :flat_amount_decimal
-        # The per unit billing amount for each individual unit for which this tier applies.
-        attr_accessor :unit_amount
-        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-        attr_accessor :unit_amount_decimal
-        # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
-        attr_accessor :up_to
-
-        def initialize(
-          flat_amount: nil,
-          flat_amount_decimal: nil,
-          unit_amount: nil,
-          unit_amount_decimal: nil,
-          up_to: nil
-        )
-          @flat_amount = flat_amount
-          @flat_amount_decimal = flat_amount_decimal
-          @unit_amount = unit_amount
-          @unit_amount_decimal = unit_amount_decimal
-          @up_to = up_to
-        end
-      end
-
-      class TransformQuantity < Stripe::RequestParams
-        # Divide usage by this number.
-        attr_accessor :divide_by
-        # After division, either round the result `up` or `down`.
-        attr_accessor :round
-
-        def initialize(divide_by: nil, round: nil)
-          @divide_by = divide_by
-          @round = round
-        end
-      end
-      # Whether the price can be used for new purchases. Defaults to `true`.
-      attr_accessor :active
-      # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
-      attr_accessor :billing_scheme
-      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-      attr_accessor :currency
-      # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
-      attr_accessor :currency_options
-      # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
-      attr_accessor :custom_unit_amount
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
-      attr_accessor :lookup_key
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      attr_accessor :metadata
-      # A brief description of the price, hidden from customers.
-      attr_accessor :nickname
-      # The ID of the product that this price will belong to.
-      attr_accessor :product
-      # These fields can be used to create a new product that this price will belong to.
-      attr_accessor :product_data
-      # The recurring components of a price such as `interval` and `usage_type`.
-      attr_accessor :recurring
-      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-      attr_accessor :tax_behavior
-      # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
-      attr_accessor :tiers
-      # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price, in `graduated` tiering pricing can successively change as the quantity grows.
-      attr_accessor :tiers_mode
-      # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
-      attr_accessor :transfer_lookup_key
-      # Apply a transformation to the reported usage or set quantity before computing the billed price. Cannot be combined with `tiers`.
-      attr_accessor :transform_quantity
-      # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge. One of `unit_amount`, `unit_amount_decimal`, or `custom_unit_amount` is required, unless `billing_scheme=tiered`.
-      attr_accessor :unit_amount
-      # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-      attr_accessor :unit_amount_decimal
-
-      def initialize(
-        active: nil,
-        billing_scheme: nil,
-        currency: nil,
-        currency_options: nil,
-        custom_unit_amount: nil,
-        expand: nil,
-        lookup_key: nil,
-        metadata: nil,
-        nickname: nil,
-        product: nil,
-        product_data: nil,
-        recurring: nil,
-        tax_behavior: nil,
-        tiers: nil,
-        tiers_mode: nil,
-        transfer_lookup_key: nil,
-        transform_quantity: nil,
-        unit_amount: nil,
-        unit_amount_decimal: nil
-      )
-        @active = active
-        @billing_scheme = billing_scheme
-        @currency = currency
-        @currency_options = currency_options
-        @custom_unit_amount = custom_unit_amount
-        @expand = expand
-        @lookup_key = lookup_key
-        @metadata = metadata
-        @nickname = nickname
-        @product = product
-        @product_data = product_data
-        @recurring = recurring
-        @tax_behavior = tax_behavior
-        @tiers = tiers
-        @tiers_mode = tiers_mode
-        @transfer_lookup_key = transfer_lookup_key
-        @transform_quantity = transform_quantity
-        @unit_amount = unit_amount
-        @unit_amount_decimal = unit_amount_decimal
-      end
-    end
-
-    class RetrieveParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
-    class UpdateParams < Stripe::RequestParams
-      class CurrencyOptions < Stripe::RequestParams
-        class CustomUnitAmount < Stripe::RequestParams
-          # Pass in `true` to enable `custom_unit_amount`, otherwise omit `custom_unit_amount`.
-          attr_accessor :enabled
-          # The maximum unit amount the customer can specify for this item.
-          attr_accessor :maximum
-          # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
-          attr_accessor :minimum
-          # The starting unit amount which can be updated by the customer.
-          attr_accessor :preset
-
-          def initialize(enabled: nil, maximum: nil, minimum: nil, preset: nil)
-            @enabled = enabled
-            @maximum = maximum
-            @minimum = minimum
-            @preset = preset
-          end
-        end
-
-        class Tier < Stripe::RequestParams
-          # The flat billing amount for an entire tier, regardless of the number of units in the tier.
-          attr_accessor :flat_amount
-          # Same as `flat_amount`, but accepts a decimal value representing an integer in the minor units of the currency. Only one of `flat_amount` and `flat_amount_decimal` can be set.
-          attr_accessor :flat_amount_decimal
-          # The per unit billing amount for each individual unit for which this tier applies.
-          attr_accessor :unit_amount
-          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-          attr_accessor :unit_amount_decimal
-          # Specifies the upper bound of this tier. The lower bound of a tier is the upper bound of the previous tier adding one. Use `inf` to define a fallback tier.
-          attr_accessor :up_to
-
-          def initialize(
-            flat_amount: nil,
-            flat_amount_decimal: nil,
-            unit_amount: nil,
-            unit_amount_decimal: nil,
-            up_to: nil
-          )
-            @flat_amount = flat_amount
-            @flat_amount_decimal = flat_amount_decimal
-            @unit_amount = unit_amount
-            @unit_amount_decimal = unit_amount_decimal
-            @up_to = up_to
-          end
-        end
-        # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
-        attr_accessor :custom_unit_amount
-        # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-        attr_accessor :tax_behavior
-        # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
-        attr_accessor :tiers
-        # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
-        attr_accessor :unit_amount
-        # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-        attr_accessor :unit_amount_decimal
-
-        def initialize(
-          custom_unit_amount: nil,
-          tax_behavior: nil,
-          tiers: nil,
-          unit_amount: nil,
-          unit_amount_decimal: nil
-        )
-          @custom_unit_amount = custom_unit_amount
-          @tax_behavior = tax_behavior
-          @tiers = tiers
-          @unit_amount = unit_amount
-          @unit_amount_decimal = unit_amount_decimal
-        end
-      end
-
-      class MigrateTo < Stripe::RequestParams
-        # The behavior controlling the point in the subscription lifecycle after which to migrate the price. Currently must be `at_cycle_end`.
-        attr_accessor :behavior
-        # The time after which subscriptions should start using the new price.
-        attr_accessor :effective_after
-        # The ID of the price object.
-        attr_accessor :price
-
-        def initialize(behavior: nil, effective_after: nil, price: nil)
-          @behavior = behavior
-          @effective_after = effective_after
-          @price = price
-        end
-      end
-      # Whether the price can be used for new purchases. Defaults to `true`.
-      attr_accessor :active
-      # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
-      attr_accessor :currency_options
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
-      attr_accessor :lookup_key
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      attr_accessor :metadata
-      # If specified, subscriptions using this price will be updated to use the new referenced price.
-      attr_accessor :migrate_to
-      # A brief description of the price, hidden from customers.
-      attr_accessor :nickname
-      # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-      attr_accessor :tax_behavior
-      # If set to true, will atomically remove the lookup key from the existing price, and assign it to this price.
-      attr_accessor :transfer_lookup_key
-
-      def initialize(
-        active: nil,
-        currency_options: nil,
-        expand: nil,
-        lookup_key: nil,
-        metadata: nil,
-        migrate_to: nil,
-        nickname: nil,
-        tax_behavior: nil,
-        transfer_lookup_key: nil
-      )
-        @active = active
-        @currency_options = currency_options
-        @expand = expand
-        @lookup_key = lookup_key
-        @metadata = metadata
-        @migrate_to = migrate_to
-        @nickname = nickname
-        @tax_behavior = tax_behavior
-        @transfer_lookup_key = transfer_lookup_key
-      end
-    end
-
-    class SearchParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # A cursor for pagination across multiple pages of results. Don't include this parameter on the first call. Use the next_page value returned in a previous response to request subsequent results.
-      attr_accessor :page
-      # The search query string. See [search query language](https://stripe.com/docs/search#search-query-language) and the list of supported [query fields for prices](https://stripe.com/docs/search#query-fields-for-prices).
-      attr_accessor :query
-
-      def initialize(expand: nil, limit: nil, page: nil, query: nil)
-        @expand = expand
-        @limit = limit
-        @page = page
-        @query = query
-      end
-    end
-    # Whether the price can be used for new purchases.
-    attr_reader :active
-    # Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes.
-    attr_reader :billing_scheme
-    # Time at which the object was created. Measured in seconds since the Unix epoch.
-    attr_reader :created
-    # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-    attr_reader :currency
-    # Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
-    attr_reader :currency_options
-    # When set, provides configuration for the amount to be adjusted by the customer during Checkout Sessions and Payment Links.
-    attr_reader :custom_unit_amount
-    # Unique identifier for the object.
-    attr_reader :id
-    # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-    attr_reader :livemode
-    # A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters.
-    attr_reader :lookup_key
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-    attr_reader :metadata
-    # Subscriptions using this price will be migrated to use the new referenced price.
-    attr_reader :migrate_to
-    # A brief description of the price, hidden from customers.
-    attr_reader :nickname
-    # String representing the object's type. Objects of the same type share the same value.
-    attr_reader :object
-    # The ID of the product this price is associated with.
-    attr_reader :product
-    # The recurring components of a price such as `interval` and `usage_type`.
-    attr_reader :recurring
-    # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-    attr_reader :tax_behavior
-    # Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`.
-    attr_reader :tiers
-    # Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price. In `graduated` tiering, pricing can change as the quantity grows.
-    attr_reader :tiers_mode
-    # Apply a transformation to the reported usage or set quantity before computing the amount billed. Cannot be combined with `tiers`.
-    attr_reader :transform_quantity
-    # One of `one_time` or `recurring` depending on whether the price is for a one-time purchase or a recurring (subscription) purchase.
-    attr_reader :type
-    # The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`.
-    attr_reader :unit_amount
-    # The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`.
-    attr_reader :unit_amount_decimal
-    # Always true for a deleted object
-    attr_reader :deleted
-
     # Creates a new price for an existing product. The price can be recurring or one-time.
     def self.create(params = {}, opts = {})
       request_stripe_object(method: :post, path: "/v1/prices", params: params, opts: opts)
@@ -687,10 +38,10 @@ module Stripe
     end
 
     # Updates the specified price by setting the values of the parameters passed. Any parameters not provided are left unchanged.
-    def self.update(id, params = {}, opts = {})
+    def self.update(price, params = {}, opts = {})
       request_stripe_object(
         method: :post,
-        path: format("/v1/prices/%<id>s", { id: CGI.escape(id) }),
+        path: format("/v1/prices/%<price>s", { price: CGI.escape(price) }),
         params: params,
         opts: opts
       )