stripe 13.4.0.pre.beta.4 → 13.4.1

data/lib/stripe/services/source_service.rb

@@ -10,607 +10,6 @@ module Stripe
       @transactions = Stripe::SourceTransactionService.new(@requestor)
     end
 
-    class DetachParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
-    class RetrieveParams < Stripe::RequestParams
-      # The client secret of the source. Required if a publishable key is used to retrieve the source.
-      attr_accessor :client_secret
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(client_secret: nil, expand: nil)
-        @client_secret = client_secret
-        @expand = expand
-      end
-    end
-
-    class UpdateParams < Stripe::RequestParams
-      class Mandate < Stripe::RequestParams
-        class Acceptance < Stripe::RequestParams
-          class Offline < Stripe::RequestParams
-            # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
-            attr_accessor :contact_email
-
-            def initialize(contact_email: nil)
-              @contact_email = contact_email
-            end
-          end
-
-          class Online < Stripe::RequestParams
-            # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
-            attr_accessor :date
-            # The IP address from which the mandate was accepted or refused by the customer.
-            attr_accessor :ip
-            # The user agent of the browser from which the mandate was accepted or refused by the customer.
-            attr_accessor :user_agent
-
-            def initialize(date: nil, ip: nil, user_agent: nil)
-              @date = date
-              @ip = ip
-              @user_agent = user_agent
-            end
-          end
-          # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
-          attr_accessor :date
-          # The IP address from which the mandate was accepted or refused by the customer.
-          attr_accessor :ip
-          # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
-          attr_accessor :offline
-          # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
-          attr_accessor :online
-          # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
-          attr_accessor :status
-          # The type of acceptance information included with the mandate. Either `online` or `offline`
-          attr_accessor :type
-          # The user agent of the browser from which the mandate was accepted or refused by the customer.
-          attr_accessor :user_agent
-
-          def initialize(
-            date: nil,
-            ip: nil,
-            offline: nil,
-            online: nil,
-            status: nil,
-            type: nil,
-            user_agent: nil
-          )
-            @date = date
-            @ip = ip
-            @offline = offline
-            @online = online
-            @status = status
-            @type = type
-            @user_agent = user_agent
-          end
-        end
-        # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
-        attr_accessor :acceptance
-        # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
-        attr_accessor :amount
-        # The currency specified by the mandate. (Must match `currency` of the source)
-        attr_accessor :currency
-        # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
-        attr_accessor :interval
-        # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
-        attr_accessor :notification_method
-
-        def initialize(
-          acceptance: nil,
-          amount: nil,
-          currency: nil,
-          interval: nil,
-          notification_method: nil
-        )
-          @acceptance = acceptance
-          @amount = amount
-          @currency = currency
-          @interval = interval
-          @notification_method = notification_method
-        end
-      end
-
-      class Owner < Stripe::RequestParams
-        class Address < Stripe::RequestParams
-          # City, district, suburb, town, or village.
-          attr_accessor :city
-          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          attr_accessor :country
-          # Address line 1 (e.g., street, PO Box, or company name).
-          attr_accessor :line1
-          # Address line 2 (e.g., apartment, suite, unit, or building).
-          attr_accessor :line2
-          # ZIP or postal code.
-          attr_accessor :postal_code
-          # State, county, province, or region.
-          attr_accessor :state
-
-          def initialize(
-            city: nil,
-            country: nil,
-            line1: nil,
-            line2: nil,
-            postal_code: nil,
-            state: nil
-          )
-            @city = city
-            @country = country
-            @line1 = line1
-            @line2 = line2
-            @postal_code = postal_code
-            @state = state
-          end
-        end
-        # Owner's address.
-        attr_accessor :address
-        # Owner's email address.
-        attr_accessor :email
-        # Owner's full name.
-        attr_accessor :name
-        # Owner's phone number.
-        attr_accessor :phone
-
-        def initialize(address: nil, email: nil, name: nil, phone: nil)
-          @address = address
-          @email = email
-          @name = name
-          @phone = phone
-        end
-      end
-
-      class SourceOrder < Stripe::RequestParams
-        class Item < Stripe::RequestParams
-          # Attribute for param field amount
-          attr_accessor :amount
-          # Attribute for param field currency
-          attr_accessor :currency
-          # Attribute for param field description
-          attr_accessor :description
-          # The ID of the SKU being ordered.
-          attr_accessor :parent
-          # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
-          attr_accessor :quantity
-          # Attribute for param field type
-          attr_accessor :type
-
-          def initialize(
-            amount: nil,
-            currency: nil,
-            description: nil,
-            parent: nil,
-            quantity: nil,
-            type: nil
-          )
-            @amount = amount
-            @currency = currency
-            @description = description
-            @parent = parent
-            @quantity = quantity
-            @type = type
-          end
-        end
-
-        class Shipping < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-          # Shipping address.
-          attr_accessor :address
-          # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
-          attr_accessor :carrier
-          # Recipient name.
-          attr_accessor :name
-          # Recipient phone (including extension).
-          attr_accessor :phone
-          # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
-          attr_accessor :tracking_number
-
-          def initialize(address: nil, carrier: nil, name: nil, phone: nil, tracking_number: nil)
-            @address = address
-            @carrier = carrier
-            @name = name
-            @phone = phone
-            @tracking_number = tracking_number
-          end
-        end
-        # List of items constituting the order.
-        attr_accessor :items
-        # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
-        attr_accessor :shipping
-
-        def initialize(items: nil, shipping: nil)
-          @items = items
-          @shipping = shipping
-        end
-      end
-      # Amount associated with the source.
-      attr_accessor :amount
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
-      attr_accessor :mandate
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      attr_accessor :metadata
-      # Information about the owner of the payment instrument that may be used or required by particular source types.
-      attr_accessor :owner
-      # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
-      attr_accessor :source_order
-
-      def initialize(
-        amount: nil,
-        expand: nil,
-        mandate: nil,
-        metadata: nil,
-        owner: nil,
-        source_order: nil
-      )
-        @amount = amount
-        @expand = expand
-        @mandate = mandate
-        @metadata = metadata
-        @owner = owner
-        @source_order = source_order
-      end
-    end
-
-    class CreateParams < Stripe::RequestParams
-      class Mandate < Stripe::RequestParams
-        class Acceptance < Stripe::RequestParams
-          class Offline < Stripe::RequestParams
-            # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
-            attr_accessor :contact_email
-
-            def initialize(contact_email: nil)
-              @contact_email = contact_email
-            end
-          end
-
-          class Online < Stripe::RequestParams
-            # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
-            attr_accessor :date
-            # The IP address from which the mandate was accepted or refused by the customer.
-            attr_accessor :ip
-            # The user agent of the browser from which the mandate was accepted or refused by the customer.
-            attr_accessor :user_agent
-
-            def initialize(date: nil, ip: nil, user_agent: nil)
-              @date = date
-              @ip = ip
-              @user_agent = user_agent
-            end
-          end
-          # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
-          attr_accessor :date
-          # The IP address from which the mandate was accepted or refused by the customer.
-          attr_accessor :ip
-          # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
-          attr_accessor :offline
-          # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
-          attr_accessor :online
-          # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
-          attr_accessor :status
-          # The type of acceptance information included with the mandate. Either `online` or `offline`
-          attr_accessor :type
-          # The user agent of the browser from which the mandate was accepted or refused by the customer.
-          attr_accessor :user_agent
-
-          def initialize(
-            date: nil,
-            ip: nil,
-            offline: nil,
-            online: nil,
-            status: nil,
-            type: nil,
-            user_agent: nil
-          )
-            @date = date
-            @ip = ip
-            @offline = offline
-            @online = online
-            @status = status
-            @type = type
-            @user_agent = user_agent
-          end
-        end
-        # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
-        attr_accessor :acceptance
-        # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
-        attr_accessor :amount
-        # The currency specified by the mandate. (Must match `currency` of the source)
-        attr_accessor :currency
-        # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
-        attr_accessor :interval
-        # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
-        attr_accessor :notification_method
-
-        def initialize(
-          acceptance: nil,
-          amount: nil,
-          currency: nil,
-          interval: nil,
-          notification_method: nil
-        )
-          @acceptance = acceptance
-          @amount = amount
-          @currency = currency
-          @interval = interval
-          @notification_method = notification_method
-        end
-      end
-
-      class Owner < Stripe::RequestParams
-        class Address < Stripe::RequestParams
-          # City, district, suburb, town, or village.
-          attr_accessor :city
-          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          attr_accessor :country
-          # Address line 1 (e.g., street, PO Box, or company name).
-          attr_accessor :line1
-          # Address line 2 (e.g., apartment, suite, unit, or building).
-          attr_accessor :line2
-          # ZIP or postal code.
-          attr_accessor :postal_code
-          # State, county, province, or region.
-          attr_accessor :state
-
-          def initialize(
-            city: nil,
-            country: nil,
-            line1: nil,
-            line2: nil,
-            postal_code: nil,
-            state: nil
-          )
-            @city = city
-            @country = country
-            @line1 = line1
-            @line2 = line2
-            @postal_code = postal_code
-            @state = state
-          end
-        end
-        # Owner's address.
-        attr_accessor :address
-        # Owner's email address.
-        attr_accessor :email
-        # Owner's full name.
-        attr_accessor :name
-        # Owner's phone number.
-        attr_accessor :phone
-
-        def initialize(address: nil, email: nil, name: nil, phone: nil)
-          @address = address
-          @email = email
-          @name = name
-          @phone = phone
-        end
-      end
-
-      class Receiver < Stripe::RequestParams
-        # The method Stripe should use to request information needed to process a refund or mispayment. Either `email` (an email is sent directly to the customer) or `manual` (a `source.refund_attributes_required` event is sent to your webhooks endpoint). Refer to each payment method's documentation to learn which refund attributes may be required.
-        attr_accessor :refund_attributes_method
-
-        def initialize(refund_attributes_method: nil)
-          @refund_attributes_method = refund_attributes_method
-        end
-      end
-
-      class Redirect < Stripe::RequestParams
-        # The URL you provide to redirect the customer back to you after they authenticated their payment. It can use your application URI scheme in the context of a mobile application.
-        attr_accessor :return_url
-
-        def initialize(return_url: nil)
-          @return_url = return_url
-        end
-      end
-
-      class SourceOrder < Stripe::RequestParams
-        class Item < Stripe::RequestParams
-          # Attribute for param field amount
-          attr_accessor :amount
-          # Attribute for param field currency
-          attr_accessor :currency
-          # Attribute for param field description
-          attr_accessor :description
-          # The ID of the SKU being ordered.
-          attr_accessor :parent
-          # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
-          attr_accessor :quantity
-          # Attribute for param field type
-          attr_accessor :type
-
-          def initialize(
-            amount: nil,
-            currency: nil,
-            description: nil,
-            parent: nil,
-            quantity: nil,
-            type: nil
-          )
-            @amount = amount
-            @currency = currency
-            @description = description
-            @parent = parent
-            @quantity = quantity
-            @type = type
-          end
-        end
-
-        class Shipping < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-          # Shipping address.
-          attr_accessor :address
-          # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
-          attr_accessor :carrier
-          # Recipient name.
-          attr_accessor :name
-          # Recipient phone (including extension).
-          attr_accessor :phone
-          # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
-          attr_accessor :tracking_number
-
-          def initialize(address: nil, carrier: nil, name: nil, phone: nil, tracking_number: nil)
-            @address = address
-            @carrier = carrier
-            @name = name
-            @phone = phone
-            @tracking_number = tracking_number
-          end
-        end
-        # List of items constituting the order.
-        attr_accessor :items
-        # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
-        attr_accessor :shipping
-
-        def initialize(items: nil, shipping: nil)
-          @items = items
-          @shipping = shipping
-        end
-      end
-      # Amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. Not supported for `receiver` type sources, where charge amount may not be specified until funds land.
-      attr_accessor :amount
-      # Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready.
-      attr_accessor :currency
-      # The `Customer` to whom the original source is attached to. Must be set when the original source is not a `Source` (e.g., `Card`).
-      attr_accessor :customer
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # The authentication `flow` of the source to create. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. It is generally inferred unless a type supports multiple flows.
-      attr_accessor :flow
-      # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
-      attr_accessor :mandate
-      # Attribute for param field metadata
-      attr_accessor :metadata
-      # The source to share.
-      attr_accessor :original_source
-      # Information about the owner of the payment instrument that may be used or required by particular source types.
-      attr_accessor :owner
-      # Optional parameters for the receiver flow. Can be set only if the source is a receiver (`flow` is `receiver`).
-      attr_accessor :receiver
-      # Parameters required for the redirect flow. Required if the source is authenticated by a redirect (`flow` is `redirect`).
-      attr_accessor :redirect
-      # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
-      attr_accessor :source_order
-      # An arbitrary string to be displayed on your customer's statement. As an example, if your website is `RunClub` and the item you're charging for is a race ticket, you may want to specify a `statement_descriptor` of `RunClub 5K race ticket.` While many payment types will display this information, some may not display it at all.
-      attr_accessor :statement_descriptor
-      # An optional token used to create the source. When passed, token properties will override source parameters.
-      attr_accessor :token
-      # The `type` of the source to create. Required unless `customer` and `original_source` are specified (see the [Cloning card Sources](https://stripe.com/docs/sources/connect#cloning-card-sources) guide)
-      attr_accessor :type
-      # Attribute for param field usage
-      attr_accessor :usage
-
-      def initialize(
-        amount: nil,
-        currency: nil,
-        customer: nil,
-        expand: nil,
-        flow: nil,
-        mandate: nil,
-        metadata: nil,
-        original_source: nil,
-        owner: nil,
-        receiver: nil,
-        redirect: nil,
-        source_order: nil,
-        statement_descriptor: nil,
-        token: nil,
-        type: nil,
-        usage: nil
-      )
-        @amount = amount
-        @currency = currency
-        @customer = customer
-        @expand = expand
-        @flow = flow
-        @mandate = mandate
-        @metadata = metadata
-        @original_source = original_source
-        @owner = owner
-        @receiver = receiver
-        @redirect = redirect
-        @source_order = source_order
-        @statement_descriptor = statement_descriptor
-        @token = token
-        @type = type
-        @usage = usage
-      end
-    end
-
-    class VerifyParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # The values needed to verify the source.
-      attr_accessor :values
-
-      def initialize(expand: nil, values: nil)
-        @expand = expand
-        @values = values
-      end
-    end
-
     # Creates a new source object.
     def create(params = {}, opts = {})
       request(method: :post, path: "/v1/sources", params: params, opts: opts, base_address: :api)

data/lib/stripe/services/source_transaction_service.rb

@@ -3,24 +3,6 @@
 
 module Stripe
   class SourceTransactionService < StripeService
-    class ListParams < Stripe::RequestParams
-      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      attr_accessor :ending_before
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      attr_accessor :starting_after
-
-      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
-        @ending_before = ending_before
-        @expand = expand
-        @limit = limit
-        @starting_after = starting_after
-      end
-    end
-
     # List source transactions for a given source.
     def list(source, params = {}, opts = {})
       request(