stripe 13.4.0.pre.beta.3 → 13.4.0

data/lib/stripe/services/issuing/authorization_service.rb

@@ -4,110 +4,6 @@
 module Stripe
   module Issuing
     class AuthorizationService < StripeService
-      class ListParams < Stripe::RequestParams
-        class Created < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          attr_accessor :lte
-
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
-            @gt = gt
-            @gte = gte
-            @lt = lt
-            @lte = lte
-          end
-        end
-        # Only return authorizations that belong to the given card.
-        attr_accessor :card
-        # Only return authorizations that belong to the given cardholder.
-        attr_accessor :cardholder
-        # Only return authorizations that were created during the given date interval.
-        attr_accessor :created
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        attr_accessor :limit
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        attr_accessor :starting_after
-        # Only return authorizations with the given status. One of `pending`, `closed`, or `reversed`.
-        attr_accessor :status
-
-        def initialize(
-          card: nil,
-          cardholder: nil,
-          created: nil,
-          ending_before: nil,
-          expand: nil,
-          limit: nil,
-          starting_after: nil,
-          status: nil
-        )
-          @card = card
-          @cardholder = cardholder
-          @created = created
-          @ending_before = ending_before
-          @expand = expand
-          @limit = limit
-          @starting_after = starting_after
-          @status = status
-        end
-      end
-
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
-
-      class UpdateParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-
-        def initialize(expand: nil, metadata: nil)
-          @expand = expand
-          @metadata = metadata
-        end
-      end
-
-      class ApproveParams < Stripe::RequestParams
-        # If the authorization's `pending_request.is_amount_controllable` property is `true`, you may provide this value to control how much to hold for the authorization. Must be positive (use [`decline`](https://stripe.com/docs/api/issuing/authorizations/decline) to decline an authorization request).
-        attr_accessor :amount
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-
-        def initialize(amount: nil, expand: nil, metadata: nil)
-          @amount = amount
-          @expand = expand
-          @metadata = metadata
-        end
-      end
-
-      class DeclineParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-
-        def initialize(expand: nil, metadata: nil)
-          @expand = expand
-          @metadata = metadata
-        end
-      end
-
       # [Deprecated] Approves a pending Issuing Authorization object. This request should be made within the timeout window of the [real-time authorization](https://stripe.com/docs/issuing/controls/real-time-authorizations) flow.
       # This method is deprecated. Instead, [respond directly to the webhook request to approve an authorization](https://stripe.com/docs/issuing/controls/real-time-authorizations#authorization-handling).
       def approve(authorization, params = {}, opts = {})

data/lib/stripe/services/issuing/card_service.rb

@@ -4,461 +4,6 @@
 module Stripe
   module Issuing
     class CardService < StripeService
-      class ListParams < Stripe::RequestParams
-        class Created < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          attr_accessor :lte
-
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
-            @gt = gt
-            @gte = gte
-            @lt = lt
-            @lte = lte
-          end
-        end
-        # Only return cards belonging to the Cardholder with the provided ID.
-        attr_accessor :cardholder
-        # Only return cards that were issued during the given date interval.
-        attr_accessor :created
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        attr_accessor :ending_before
-        # Only return cards that have the given expiration month.
-        attr_accessor :exp_month
-        # Only return cards that have the given expiration year.
-        attr_accessor :exp_year
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Only return cards that have the given last four digits.
-        attr_accessor :last4
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        attr_accessor :limit
-        # Attribute for param field personalization_design
-        attr_accessor :personalization_design
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        attr_accessor :starting_after
-        # Only return cards that have the given status. One of `active`, `inactive`, or `canceled`.
-        attr_accessor :status
-        # Only return cards that have the given type. One of `virtual` or `physical`.
-        attr_accessor :type
-
-        def initialize(
-          cardholder: nil,
-          created: nil,
-          ending_before: nil,
-          exp_month: nil,
-          exp_year: nil,
-          expand: nil,
-          last4: nil,
-          limit: nil,
-          personalization_design: nil,
-          starting_after: nil,
-          status: nil,
-          type: nil
-        )
-          @cardholder = cardholder
-          @created = created
-          @ending_before = ending_before
-          @exp_month = exp_month
-          @exp_year = exp_year
-          @expand = expand
-          @last4 = last4
-          @limit = limit
-          @personalization_design = personalization_design
-          @starting_after = starting_after
-          @status = status
-          @type = type
-        end
-      end
-
-      class CreateParams < Stripe::RequestParams
-        class Pin < Stripe::RequestParams
-          # The card's desired new PIN, encrypted under Stripe's public key.
-          attr_accessor :encrypted_number
-
-          def initialize(encrypted_number: nil)
-            @encrypted_number = encrypted_number
-          end
-        end
-
-        class Shipping < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class AddressValidation < Stripe::RequestParams
-            # The address validation capabilities to use.
-            attr_accessor :mode
-
-            def initialize(mode: nil)
-              @mode = mode
-            end
-          end
-
-          class Customs < Stripe::RequestParams
-            # The Economic Operators Registration and Identification (EORI) number to use for Customs. Required for bulk shipments to Europe.
-            attr_accessor :eori_number
-
-            def initialize(eori_number: nil)
-              @eori_number = eori_number
-            end
-          end
-          # The address that the card is shipped to.
-          attr_accessor :address
-          # Address validation settings.
-          attr_accessor :address_validation
-          # Customs information for the shipment.
-          attr_accessor :customs
-          # The name printed on the shipping label when shipping the card.
-          attr_accessor :name
-          # Phone number of the recipient of the shipment.
-          attr_accessor :phone_number
-          # Whether a signature is required for card delivery.
-          attr_accessor :require_signature
-          # Shipment service.
-          attr_accessor :service
-          # Packaging options.
-          attr_accessor :type
-
-          def initialize(
-            address: nil,
-            address_validation: nil,
-            customs: nil,
-            name: nil,
-            phone_number: nil,
-            require_signature: nil,
-            service: nil,
-            type: nil
-          )
-            @address = address
-            @address_validation = address_validation
-            @customs = customs
-            @name = name
-            @phone_number = phone_number
-            @require_signature = require_signature
-            @service = service
-            @type = type
-          end
-        end
-
-        class SpendingControls < Stripe::RequestParams
-          class SpendingLimit < Stripe::RequestParams
-            # Maximum amount allowed to spend per interval.
-            attr_accessor :amount
-            # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
-            attr_accessor :categories
-            # Interval (or event) to which the amount applies.
-            attr_accessor :interval
-
-            def initialize(amount: nil, categories: nil, interval: nil)
-              @amount = amount
-              @categories = categories
-              @interval = interval
-            end
-          end
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
-          attr_accessor :allowed_categories
-          # Array of strings containing representing countries from which authorizations will be allowed. Authorizations from merchants in all other countries will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `blocked_merchant_countries`. Provide an empty value to unset this control.
-          attr_accessor :allowed_merchant_countries
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
-          attr_accessor :blocked_categories
-          # Array of strings containing representing countries from which authorizations will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `allowed_merchant_countries`. Provide an empty value to unset this control.
-          attr_accessor :blocked_merchant_countries
-          # Limit spending with amount-based rules that apply across any cards this card replaced (i.e., its `replacement_for` card and _that_ card's `replacement_for` card, up the chain).
-          attr_accessor :spending_limits
-
-          def initialize(
-            allowed_categories: nil,
-            allowed_merchant_countries: nil,
-            blocked_categories: nil,
-            blocked_merchant_countries: nil,
-            spending_limits: nil
-          )
-            @allowed_categories = allowed_categories
-            @allowed_merchant_countries = allowed_merchant_countries
-            @blocked_categories = blocked_categories
-            @blocked_merchant_countries = blocked_merchant_countries
-            @spending_limits = spending_limits
-          end
-        end
-        # The [Cardholder](https://stripe.com/docs/api#issuing_cardholder_object) object with which the card will be associated.
-        attr_accessor :cardholder
-        # The currency for the card.
-        attr_accessor :currency
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Attribute for param field financial_account
-        attr_accessor :financial_account
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-        # The personalization design object belonging to this card.
-        attr_accessor :personalization_design
-        # The desired PIN for this card.
-        attr_accessor :pin
-        # The card this is meant to be a replacement for (if any).
-        attr_accessor :replacement_for
-        # If `replacement_for` is specified, this should indicate why that card is being replaced.
-        attr_accessor :replacement_reason
-        # The second line to print on the card. Max length: 24 characters.
-        attr_accessor :second_line
-        # The address where the card will be shipped.
-        attr_accessor :shipping
-        # Rules that control spending for this card. Refer to our [documentation](https://stripe.com/docs/issuing/controls/spending-controls) for more details.
-        attr_accessor :spending_controls
-        # Whether authorizations can be approved on this card. May be blocked from activating cards depending on past-due Cardholder requirements. Defaults to `inactive`.
-        attr_accessor :status
-        # The type of card to issue. Possible values are `physical` or `virtual`.
-        attr_accessor :type
-
-        def initialize(
-          cardholder: nil,
-          currency: nil,
-          expand: nil,
-          financial_account: nil,
-          metadata: nil,
-          personalization_design: nil,
-          pin: nil,
-          replacement_for: nil,
-          replacement_reason: nil,
-          second_line: nil,
-          shipping: nil,
-          spending_controls: nil,
-          status: nil,
-          type: nil
-        )
-          @cardholder = cardholder
-          @currency = currency
-          @expand = expand
-          @financial_account = financial_account
-          @metadata = metadata
-          @personalization_design = personalization_design
-          @pin = pin
-          @replacement_for = replacement_for
-          @replacement_reason = replacement_reason
-          @second_line = second_line
-          @shipping = shipping
-          @spending_controls = spending_controls
-          @status = status
-          @type = type
-        end
-      end
-
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
-
-      class UpdateParams < Stripe::RequestParams
-        class Pin < Stripe::RequestParams
-          # The card's desired new PIN, encrypted under Stripe's public key.
-          attr_accessor :encrypted_number
-
-          def initialize(encrypted_number: nil)
-            @encrypted_number = encrypted_number
-          end
-        end
-
-        class Shipping < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class AddressValidation < Stripe::RequestParams
-            # The address validation capabilities to use.
-            attr_accessor :mode
-
-            def initialize(mode: nil)
-              @mode = mode
-            end
-          end
-
-          class Customs < Stripe::RequestParams
-            # The Economic Operators Registration and Identification (EORI) number to use for Customs. Required for bulk shipments to Europe.
-            attr_accessor :eori_number
-
-            def initialize(eori_number: nil)
-              @eori_number = eori_number
-            end
-          end
-          # The address that the card is shipped to.
-          attr_accessor :address
-          # Address validation settings.
-          attr_accessor :address_validation
-          # Customs information for the shipment.
-          attr_accessor :customs
-          # The name printed on the shipping label when shipping the card.
-          attr_accessor :name
-          # Phone number of the recipient of the shipment.
-          attr_accessor :phone_number
-          # Whether a signature is required for card delivery.
-          attr_accessor :require_signature
-          # Shipment service.
-          attr_accessor :service
-          # Packaging options.
-          attr_accessor :type
-
-          def initialize(
-            address: nil,
-            address_validation: nil,
-            customs: nil,
-            name: nil,
-            phone_number: nil,
-            require_signature: nil,
-            service: nil,
-            type: nil
-          )
-            @address = address
-            @address_validation = address_validation
-            @customs = customs
-            @name = name
-            @phone_number = phone_number
-            @require_signature = require_signature
-            @service = service
-            @type = type
-          end
-        end
-
-        class SpendingControls < Stripe::RequestParams
-          class SpendingLimit < Stripe::RequestParams
-            # Maximum amount allowed to spend per interval.
-            attr_accessor :amount
-            # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
-            attr_accessor :categories
-            # Interval (or event) to which the amount applies.
-            attr_accessor :interval
-
-            def initialize(amount: nil, categories: nil, interval: nil)
-              @amount = amount
-              @categories = categories
-              @interval = interval
-            end
-          end
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
-          attr_accessor :allowed_categories
-          # Array of strings containing representing countries from which authorizations will be allowed. Authorizations from merchants in all other countries will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `blocked_merchant_countries`. Provide an empty value to unset this control.
-          attr_accessor :allowed_merchant_countries
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
-          attr_accessor :blocked_categories
-          # Array of strings containing representing countries from which authorizations will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `allowed_merchant_countries`. Provide an empty value to unset this control.
-          attr_accessor :blocked_merchant_countries
-          # Limit spending with amount-based rules that apply across any cards this card replaced (i.e., its `replacement_for` card and _that_ card's `replacement_for` card, up the chain).
-          attr_accessor :spending_limits
-
-          def initialize(
-            allowed_categories: nil,
-            allowed_merchant_countries: nil,
-            blocked_categories: nil,
-            blocked_merchant_countries: nil,
-            spending_limits: nil
-          )
-            @allowed_categories = allowed_categories
-            @allowed_merchant_countries = allowed_merchant_countries
-            @blocked_categories = blocked_categories
-            @blocked_merchant_countries = blocked_merchant_countries
-            @spending_limits = spending_limits
-          end
-        end
-        # Reason why the `status` of this card is `canceled`.
-        attr_accessor :cancellation_reason
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        attr_accessor :metadata
-        # Attribute for param field personalization_design
-        attr_accessor :personalization_design
-        # The desired new PIN for this card.
-        attr_accessor :pin
-        # Updated shipping information for the card.
-        attr_accessor :shipping
-        # Rules that control spending for this card. Refer to our [documentation](https://stripe.com/docs/issuing/controls/spending-controls) for more details.
-        attr_accessor :spending_controls
-        # Dictates whether authorizations can be approved on this card. May be blocked from activating cards depending on past-due Cardholder requirements. Defaults to `inactive`. If this card is being canceled because it was lost or stolen, this information should be provided as `cancellation_reason`.
-        attr_accessor :status
-
-        def initialize(
-          cancellation_reason: nil,
-          expand: nil,
-          metadata: nil,
-          personalization_design: nil,
-          pin: nil,
-          shipping: nil,
-          spending_controls: nil,
-          status: nil
-        )
-          @cancellation_reason = cancellation_reason
-          @expand = expand
-          @metadata = metadata
-          @personalization_design = personalization_design
-          @pin = pin
-          @shipping = shipping
-          @spending_controls = spending_controls
-          @status = status
-        end
-      end
-
       # Creates an Issuing Card object.
       def create(params = {}, opts = {})
         request(