stripe 13.4.0.pre.beta.3 → 13.4.0

data/rbi/stripe/resources/gift_cards/transaction.rbi

@@ -1,257 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module GiftCards
-    # A gift card transaction represents a single transaction on a referenced gift card.
-    # A transaction is in one of three states, `confirmed`, `held` or `canceled`. A `confirmed`
-    # transaction is one that has added/deducted funds. A `held` transaction has created a
-    # temporary hold on funds, which can then be cancelled or confirmed. A `held` transaction
-    # can be confirmed into a `confirmed` transaction, or canceled into a `canceled` transaction.
-    # A `canceled` transaction has no effect on a gift card's balance.
-    class Transaction < APIResource
-      class CreatedBy < Stripe::StripeObject
-        class Checkout < Stripe::StripeObject
-          # The Stripe CheckoutSession that created this object.
-          sig { returns(String) }
-          attr_reader :checkout_session
-          # The Stripe CheckoutSession LineItem that created this object.
-          sig { returns(T.nilable(String)) }
-          attr_reader :line_item
-        end
-        class Order < Stripe::StripeObject
-          # The Stripe Order LineItem that created this object.
-          sig { returns(T.nilable(String)) }
-          attr_reader :line_item
-          # The Stripe Order that created this object.
-          sig { returns(String) }
-          attr_reader :order
-        end
-        class Payment < Stripe::StripeObject
-          # The PaymentIntent that created this object.
-          sig { returns(String) }
-          attr_reader :payment_intent
-        end
-        # Attribute for field checkout
-        sig { returns(Checkout) }
-        attr_reader :checkout
-        # Attribute for field order
-        sig { returns(Order) }
-        attr_reader :order
-        # Attribute for field payment
-        sig { returns(Payment) }
-        attr_reader :payment
-        # The type of event that created this object.
-        sig { returns(String) }
-        attr_reader :type
-      end
-      # The amount of this transaction. A positive value indicates that funds were added to the gift card. A negative value indicates that funds were removed from the gift card.
-      sig { returns(T.nilable(Integer)) }
-      attr_reader :amount
-      # Time at which the transaction was confirmed. Measured in seconds since the Unix epoch.
-      sig { returns(T.nilable(Integer)) }
-      attr_reader :confirmed_at
-      # Time at which the object was created. Measured in seconds since the Unix epoch.
-      sig { returns(T.nilable(Integer)) }
-      attr_reader :created
-      # The related Stripe objects that created this gift card transaction.
-      sig { returns(T.nilable(CreatedBy)) }
-      attr_reader :created_by
-      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-      sig { returns(T.nilable(String)) }
-      attr_reader :currency
-      # An arbitrary string attached to the object. Often useful for displaying to users.
-      sig { returns(T.nilable(String)) }
-      attr_reader :description
-      # The gift card that this transaction occurred on
-      sig { returns(T.nilable(String)) }
-      attr_reader :gift_card
-      # Unique identifier for the object.
-      sig { returns(String) }
-      attr_reader :id
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-      sig { returns(T.nilable(T::Hash[String, String])) }
-      attr_reader :metadata
-      # String representing the object's type. Objects of the same type share the same value.
-      sig { returns(String) }
-      attr_reader :object
-      # Status of this transaction, one of `held`, `confirmed`, or `canceled`.
-      sig { returns(T.nilable(String)) }
-      attr_reader :status
-      # A string that identifies this transaction as part of a group. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers) for details.
-      sig { returns(T.nilable(String)) }
-      attr_reader :transfer_group
-      class ListParams < Stripe::RequestParams
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        sig { returns(String) }
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        # The gift card to list transactions for.
-        sig { returns(String) }
-        attr_accessor :gift_card
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        sig { returns(Integer) }
-        attr_accessor :limit
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        sig { returns(String) }
-        attr_accessor :starting_after
-        # A string that identifies this transaction as part of a group. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers) for details.
-        sig { returns(String) }
-        attr_accessor :transfer_group
-        sig {
-          params(ending_before: String, expand: T::Array[String], gift_card: String, limit: Integer, starting_after: String, transfer_group: String).void
-         }
-        def initialize(
-          ending_before: nil,
-          expand: nil,
-          gift_card: nil,
-          limit: nil,
-          starting_after: nil,
-          transfer_group: nil
-        ); end
-      end
-      class CreateParams < Stripe::RequestParams
-        class CreatedBy < Stripe::RequestParams
-          class Payment < Stripe::RequestParams
-            # The PaymentIntent used to collect payment for this object.
-            sig { returns(String) }
-            attr_accessor :payment_intent
-            sig { params(payment_intent: String).void }
-            def initialize(payment_intent: nil); end
-          end
-          # The details for the payment that created this object.
-          sig { returns(::Stripe::GiftCards::Transaction::CreateParams::CreatedBy::Payment) }
-          attr_accessor :payment
-          # The type of event that created this object.
-          sig { returns(String) }
-          attr_accessor :type
-          sig {
-            params(payment: ::Stripe::GiftCards::Transaction::CreateParams::CreatedBy::Payment, type: String).void
-           }
-          def initialize(payment: nil, type: nil); end
-        end
-        # The amount of the transaction. A negative amount deducts funds, and a positive amount adds funds.
-        sig { returns(Integer) }
-        attr_accessor :amount
-        # Whether this is a confirmed transaction. A confirmed transaction immediately deducts from/adds to the `amount_available` on the gift card. Otherwise, it creates a held transaction that increments the `amount_held` on the gift card.
-        sig { returns(T::Boolean) }
-        attr_accessor :confirm
-        # Related objects which created this transaction.
-        sig { returns(::Stripe::GiftCards::Transaction::CreateParams::CreatedBy) }
-        attr_accessor :created_by
-        # The currency of the transaction. This must match the currency of the gift card.
-        sig { returns(String) }
-        attr_accessor :currency
-        # An arbitrary string attached to the object. Often useful for displaying to users.
-        sig { returns(String) }
-        attr_accessor :description
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        # The gift card to create a new transaction on.
-        sig { returns(String) }
-        attr_accessor :gift_card
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        sig { returns(T::Hash[String, String]) }
-        attr_accessor :metadata
-        # A string that identifies this transaction as part of a group. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers) for details.
-        sig { returns(String) }
-        attr_accessor :transfer_group
-        sig {
-          params(amount: Integer, confirm: T::Boolean, created_by: ::Stripe::GiftCards::Transaction::CreateParams::CreatedBy, currency: String, description: String, expand: T::Array[String], gift_card: String, metadata: T::Hash[String, String], transfer_group: String).void
-         }
-        def initialize(
-          amount: nil,
-          confirm: nil,
-          created_by: nil,
-          currency: nil,
-          description: nil,
-          expand: nil,
-          gift_card: nil,
-          metadata: nil,
-          transfer_group: nil
-        ); end
-      end
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        sig { params(expand: T::Array[String]).void }
-        def initialize(expand: nil); end
-      end
-      class UpdateParams < Stripe::RequestParams
-        # An arbitrary string attached to the object. Often useful for displaying to users.
-        sig { returns(String) }
-        attr_accessor :description
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        sig { returns(T.nilable(T::Hash[String, String])) }
-        attr_accessor :metadata
-        sig {
-          params(description: String, expand: T::Array[String], metadata: T.nilable(T::Hash[String, String])).void
-         }
-        def initialize(description: nil, expand: nil, metadata: nil); end
-      end
-      class CancelParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        sig { params(expand: T::Array[String]).void }
-        def initialize(expand: nil); end
-      end
-      class ConfirmParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        sig { params(expand: T::Array[String]).void }
-        def initialize(expand: nil); end
-      end
-      # Cancel a gift card transaction
-      sig {
-        params(params: T.any(::Stripe::GiftCards::Transaction::CancelParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def cancel(params = {}, opts = {}); end
-
-      # Cancel a gift card transaction
-      sig {
-        params(id: String, params: T.any(::Stripe::GiftCards::Transaction::CancelParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def self.cancel(id, params = {}, opts = {}); end
-
-      # Confirm a gift card transaction
-      sig {
-        params(params: T.any(::Stripe::GiftCards::Transaction::ConfirmParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def confirm(params = {}, opts = {}); end
-
-      # Confirm a gift card transaction
-      sig {
-        params(id: String, params: T.any(::Stripe::GiftCards::Transaction::ConfirmParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def self.confirm(id, params = {}, opts = {}); end
-
-      # Create a gift card transaction
-      sig {
-        params(params: T.any(::Stripe::GiftCards::Transaction::CreateParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def self.create(params = {}, opts = {}); end
-
-      # List gift card transactions for a gift card
-      sig {
-        params(params: T.any(::Stripe::GiftCards::Transaction::ListParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::ListObject)
-       }
-      def self.list(params = {}, opts = {}); end
-
-      # Update a gift card transaction
-      sig {
-        params(id: String, params: T.any(::Stripe::GiftCards::Transaction::UpdateParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::GiftCards::Transaction)
-       }
-      def self.update(id, params = {}, opts = {}); end
-    end
-  end
-end

data/rbi/stripe/resources/identity/verification_report.rbi

@@ -1,354 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module Identity
-    # A VerificationReport is the result of an attempt to collect and verify data from a user.
-    # The collection of verification checks performed is determined from the `type` and `options`
-    # parameters used. You can find the result of each verification check performed in the
-    # appropriate sub-resource: `document`, `id_number`, `selfie`.
-    #
-    # Each VerificationReport contains a copy of any data collected by the user as well as
-    # reference IDs which can be used to access collected images through the [FileUpload](https://stripe.com/docs/api/files)
-    # API. To configure and create VerificationReports, use the
-    # [VerificationSession](https://stripe.com/docs/api/identity/verification_sessions) API.
-    #
-    # Related guide: [Accessing verification results](https://stripe.com/docs/identity/verification-sessions#results).
-    class VerificationReport < APIResource
-      class Document < Stripe::StripeObject
-        class Address < Stripe::StripeObject
-          # City, district, suburb, town, or village.
-          sig { returns(T.nilable(String)) }
-          attr_reader :city
-          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          sig { returns(T.nilable(String)) }
-          attr_reader :country
-          # Address line 1 (e.g., street, PO Box, or company name).
-          sig { returns(T.nilable(String)) }
-          attr_reader :line1
-          # Address line 2 (e.g., apartment, suite, unit, or building).
-          sig { returns(T.nilable(String)) }
-          attr_reader :line2
-          # ZIP or postal code.
-          sig { returns(T.nilable(String)) }
-          attr_reader :postal_code
-          # State, county, province, or region.
-          sig { returns(T.nilable(String)) }
-          attr_reader :state
-        end
-        class Dob < Stripe::StripeObject
-          # Numerical day between 1 and 31.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :day
-          # Numerical month between 1 and 12.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :month
-          # The four-digit year.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :year
-        end
-        class Error < Stripe::StripeObject
-          # A short machine-readable string giving the reason for the verification failure.
-          sig { returns(T.nilable(String)) }
-          attr_reader :code
-          # A human-readable message giving the reason for the failure. These messages can be shown to your users.
-          sig { returns(T.nilable(String)) }
-          attr_reader :reason
-        end
-        class ExpirationDate < Stripe::StripeObject
-          # Numerical day between 1 and 31.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :day
-          # Numerical month between 1 and 12.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :month
-          # The four-digit year.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :year
-        end
-        class IssuedDate < Stripe::StripeObject
-          # Numerical day between 1 and 31.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :day
-          # Numerical month between 1 and 12.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :month
-          # The four-digit year.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :year
-        end
-        # Address as it appears in the document.
-        sig { returns(T.nilable(Address)) }
-        attr_reader :address
-        # Date of birth as it appears in the document.
-        sig { returns(T.nilable(Dob)) }
-        attr_reader :dob
-        # Details on the verification error. Present when status is `unverified`.
-        sig { returns(T.nilable(Error)) }
-        attr_reader :error
-        # Expiration date of the document.
-        sig { returns(T.nilable(ExpirationDate)) }
-        attr_reader :expiration_date
-        # Array of [File](https://stripe.com/docs/api/files) ids containing images for this document.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_reader :files
-        # First name as it appears in the document.
-        sig { returns(T.nilable(String)) }
-        attr_reader :first_name
-        # Issued date of the document.
-        sig { returns(T.nilable(IssuedDate)) }
-        attr_reader :issued_date
-        # Issuing country of the document.
-        sig { returns(T.nilable(String)) }
-        attr_reader :issuing_country
-        # Last name as it appears in the document.
-        sig { returns(T.nilable(String)) }
-        attr_reader :last_name
-        # Document ID number.
-        sig { returns(T.nilable(String)) }
-        attr_reader :number
-        # Status of this `document` check.
-        sig { returns(String) }
-        attr_reader :status
-        # Type of the document.
-        sig { returns(T.nilable(String)) }
-        attr_reader :type
-      end
-      class Email < Stripe::StripeObject
-        class Error < Stripe::StripeObject
-          # A short machine-readable string giving the reason for the verification failure.
-          sig { returns(T.nilable(String)) }
-          attr_reader :code
-          # A human-readable message giving the reason for the failure. These messages can be shown to your users.
-          sig { returns(T.nilable(String)) }
-          attr_reader :reason
-        end
-        # Email to be verified.
-        sig { returns(T.nilable(String)) }
-        attr_reader :email
-        # Details on the verification error. Present when status is `unverified`.
-        sig { returns(T.nilable(Error)) }
-        attr_reader :error
-        # Status of this `email` check.
-        sig { returns(String) }
-        attr_reader :status
-      end
-      class IdNumber < Stripe::StripeObject
-        class Dob < Stripe::StripeObject
-          # Numerical day between 1 and 31.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :day
-          # Numerical month between 1 and 12.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :month
-          # The four-digit year.
-          sig { returns(T.nilable(Integer)) }
-          attr_reader :year
-        end
-        class Error < Stripe::StripeObject
-          # A short machine-readable string giving the reason for the verification failure.
-          sig { returns(T.nilable(String)) }
-          attr_reader :code
-          # A human-readable message giving the reason for the failure. These messages can be shown to your users.
-          sig { returns(T.nilable(String)) }
-          attr_reader :reason
-        end
-        # Date of birth.
-        sig { returns(T.nilable(Dob)) }
-        attr_reader :dob
-        # Details on the verification error. Present when status is `unverified`.
-        sig { returns(T.nilable(Error)) }
-        attr_reader :error
-        # First name.
-        sig { returns(T.nilable(String)) }
-        attr_reader :first_name
-        # ID number. When `id_number_type` is `us_ssn`, only the last 4 digits are present.
-        sig { returns(T.nilable(String)) }
-        attr_reader :id_number
-        # Type of ID number.
-        sig { returns(T.nilable(String)) }
-        attr_reader :id_number_type
-        # Last name.
-        sig { returns(T.nilable(String)) }
-        attr_reader :last_name
-        # Status of this `id_number` check.
-        sig { returns(String) }
-        attr_reader :status
-      end
-      class Options < Stripe::StripeObject
-        class Document < Stripe::StripeObject
-          # Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.
-          sig { returns(T::Array[String]) }
-          attr_reader :allowed_types
-          # Collect an ID number and perform an [ID number check](https://stripe.com/docs/identity/verification-checks?type=id-number) with the document’s extracted name and date of birth.
-          sig { returns(T::Boolean) }
-          attr_reader :require_id_number
-          # Disable image uploads, identity document images have to be captured using the device’s camera.
-          sig { returns(T::Boolean) }
-          attr_reader :require_live_capture
-          # Capture a face image and perform a [selfie check](https://stripe.com/docs/identity/verification-checks?type=selfie) comparing a photo ID and a picture of your user’s face. [Learn more](https://stripe.com/docs/identity/selfie).
-          sig { returns(T::Boolean) }
-          attr_reader :require_matching_selfie
-        end
-        class IdNumber < Stripe::StripeObject; end
-        # Attribute for field document
-        sig { returns(Document) }
-        attr_reader :document
-        # Attribute for field id_number
-        sig { returns(IdNumber) }
-        attr_reader :id_number
-      end
-      class Phone < Stripe::StripeObject
-        class Error < Stripe::StripeObject
-          # A short machine-readable string giving the reason for the verification failure.
-          sig { returns(T.nilable(String)) }
-          attr_reader :code
-          # A human-readable message giving the reason for the failure. These messages can be shown to your users.
-          sig { returns(T.nilable(String)) }
-          attr_reader :reason
-        end
-        # Details on the verification error. Present when status is `unverified`.
-        sig { returns(T.nilable(Error)) }
-        attr_reader :error
-        # Phone to be verified.
-        sig { returns(T.nilable(String)) }
-        attr_reader :phone
-        # Status of this `phone` check.
-        sig { returns(String) }
-        attr_reader :status
-      end
-      class Selfie < Stripe::StripeObject
-        class Error < Stripe::StripeObject
-          # A short machine-readable string giving the reason for the verification failure.
-          sig { returns(T.nilable(String)) }
-          attr_reader :code
-          # A human-readable message giving the reason for the failure. These messages can be shown to your users.
-          sig { returns(T.nilable(String)) }
-          attr_reader :reason
-        end
-        # ID of the [File](https://stripe.com/docs/api/files) holding the image of the identity document used in this check.
-        sig { returns(T.nilable(String)) }
-        attr_reader :document
-        # Details on the verification error. Present when status is `unverified`.
-        sig { returns(T.nilable(Error)) }
-        attr_reader :error
-        # ID of the [File](https://stripe.com/docs/api/files) holding the image of the selfie used in this check.
-        sig { returns(T.nilable(String)) }
-        attr_reader :selfie
-        # Status of this `selfie` check.
-        sig { returns(String) }
-        attr_reader :status
-      end
-      # A string to reference this user. This can be a customer ID, a session ID, or similar, and can be used to reconcile this verification with your internal systems.
-      sig { returns(T.nilable(String)) }
-      attr_reader :client_reference_id
-      # Time at which the object was created. Measured in seconds since the Unix epoch.
-      sig { returns(Integer) }
-      attr_reader :created
-      # Result from a document check
-      sig { returns(Document) }
-      attr_reader :document
-      # Result from a email check
-      sig { returns(Email) }
-      attr_reader :email
-      # Unique identifier for the object.
-      sig { returns(String) }
-      attr_reader :id
-      # Result from an id_number check
-      sig { returns(IdNumber) }
-      attr_reader :id_number
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-      sig { returns(T::Boolean) }
-      attr_reader :livemode
-      # String representing the object's type. Objects of the same type share the same value.
-      sig { returns(String) }
-      attr_reader :object
-      # Attribute for field options
-      sig { returns(Options) }
-      attr_reader :options
-      # Result from a phone check
-      sig { returns(Phone) }
-      attr_reader :phone
-      # Result from a selfie check
-      sig { returns(Selfie) }
-      attr_reader :selfie
-      # Type of report.
-      sig { returns(String) }
-      attr_reader :type
-      # The configuration token of a verification flow from the dashboard.
-      sig { returns(String) }
-      attr_reader :verification_flow
-      # ID of the VerificationSession that created this report.
-      sig { returns(T.nilable(String)) }
-      attr_reader :verification_session
-      class ListParams < Stripe::RequestParams
-        class Created < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          sig { returns(Integer) }
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          sig { returns(Integer) }
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          sig { returns(Integer) }
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          sig { returns(Integer) }
-          attr_accessor :lte
-          sig { params(gt: Integer, gte: Integer, lt: Integer, lte: Integer).void }
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
-        end
-        # A string to reference this user. This can be a customer ID, a session ID, or similar, and can be used to reconcile this verification with your internal systems.
-        sig { returns(String) }
-        attr_accessor :client_reference_id
-        # Only return VerificationReports that were created during the given date interval.
-        sig { returns(T.any(::Stripe::Identity::VerificationReport::ListParams::Created, Integer)) }
-        attr_accessor :created
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        sig { returns(String) }
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        sig { returns(Integer) }
-        attr_accessor :limit
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        sig { returns(String) }
-        attr_accessor :starting_after
-        # Only return VerificationReports of this type
-        sig { returns(String) }
-        attr_accessor :type
-        # Only return VerificationReports created by this VerificationSession ID. It is allowed to provide a VerificationIntent ID.
-        sig { returns(String) }
-        attr_accessor :verification_session
-        sig {
-          params(client_reference_id: String, created: T.any(::Stripe::Identity::VerificationReport::ListParams::Created, Integer), ending_before: String, expand: T::Array[String], limit: Integer, starting_after: String, type: String, verification_session: String).void
-         }
-        def initialize(
-          client_reference_id: nil,
-          created: nil,
-          ending_before: nil,
-          expand: nil,
-          limit: nil,
-          starting_after: nil,
-          type: nil,
-          verification_session: nil
-        ); end
-      end
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T::Array[String]) }
-        attr_accessor :expand
-        sig { params(expand: T::Array[String]).void }
-        def initialize(expand: nil); end
-      end
-      # List all verification reports.
-      sig {
-        params(params: T.any(::Stripe::Identity::VerificationReport::ListParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::ListObject)
-       }
-      def self.list(params = {}, opts = {}); end
-    end
-  end
-end