stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.3

data/lib/stripe/resources/capability.rb

@@ -17,7 +17,6 @@ module Stripe
       class Alternative < Stripe::StripeObject
         # Fields that can be provided to satisfy all fields in `original_fields_due`.
         attr_reader :alternative_fields_due
-
         # Fields that are due and can be satisfied by providing all fields in `alternative_fields_due`.
         attr_reader :original_fields_due
       end
@@ -25,34 +24,25 @@ module Stripe
       class Error < Stripe::StripeObject
         # The code for the type of error.
         attr_reader :code
-
         # An informative message that indicates the error type and provides additional details about the error.
         attr_reader :reason
-
         # The specific user onboarding requirement field (in the requirements hash) that needs to be resolved.
         attr_reader :requirement
       end
       # Fields that are due and can be satisfied by providing the corresponding alternative fields instead.
       attr_reader :alternatives
-
       # Date on which `future_requirements` becomes the main `requirements` hash and `future_requirements` becomes empty. After the transition, `currently_due` requirements may immediately become `past_due`, but the account may also be given a grace period depending on the capability's enablement state prior to transitioning.
       attr_reader :current_deadline
-
       # Fields that need to be collected to keep the capability enabled. If not collected by `future_requirements[current_deadline]`, these fields will transition to the main `requirements` hash.
       attr_reader :currently_due
-
       # This is typed as an enum for consistency with `requirements.disabled_reason`, but it safe to assume `future_requirements.disabled_reason` is null because fields in `future_requirements` will never disable the account.
       attr_reader :disabled_reason
-
       # Fields that are `currently_due` and need to be collected again because validation or verification failed.
       attr_reader :errors
-
-      # Fields that need to be collected assuming all volume thresholds are reached. As they become required, they appear in `currently_due` as well.
+      # Fields you must collect when all thresholds are reached. As they become required, they appear in `currently_due` as well.
       attr_reader :eventually_due
-
       # Fields that weren't collected by `requirements.current_deadline`. These fields need to be collected to enable the capability on the account. New fields will never appear here; `future_requirements.past_due` will always be a subset of `requirements.past_due`.
       attr_reader :past_due
-
       # Fields that might become required depending on the results of verification or review. It's an empty array unless an asynchronous verification is pending. If verification fails, these fields move to `eventually_due` or `currently_due`. Fields might appear in `eventually_due` or `currently_due` and in `pending_verification` if verification fails but another verification is still pending.
       attr_reader :pending_verification
     end
@@ -61,7 +51,6 @@ module Stripe
       class Alternative < Stripe::StripeObject
         # Fields that can be provided to satisfy all fields in `original_fields_due`.
         attr_reader :alternative_fields_due
-
         # Fields that are due and can be satisfied by providing all fields in `alternative_fields_due`.
         attr_reader :original_fields_due
       end
@@ -69,58 +58,42 @@ module Stripe
       class Error < Stripe::StripeObject
         # The code for the type of error.
         attr_reader :code
-
         # An informative message that indicates the error type and provides additional details about the error.
         attr_reader :reason
-
         # The specific user onboarding requirement field (in the requirements hash) that needs to be resolved.
         attr_reader :requirement
       end
       # Fields that are due and can be satisfied by providing the corresponding alternative fields instead.
       attr_reader :alternatives
-
       # Date by which the fields in `currently_due` must be collected to keep the capability enabled for the account. These fields may disable the capability sooner if the next threshold is reached before they are collected.
       attr_reader :current_deadline
-
       # Fields that need to be collected to keep the capability enabled. If not collected by `current_deadline`, these fields appear in `past_due` as well, and the capability is disabled.
       attr_reader :currently_due
-
       # Description of why the capability is disabled. [Learn more about handling verification issues](https://stripe.com/docs/connect/handling-api-verification).
       attr_reader :disabled_reason
-
       # Fields that are `currently_due` and need to be collected again because validation or verification failed.
       attr_reader :errors
-
-      # Fields that need to be collected assuming all volume thresholds are reached. As they become required, they appear in `currently_due` as well, and `current_deadline` becomes set.
+      # Fields you must collect when all thresholds are reached. As they become required, they appear in `currently_due` as well, and `current_deadline` becomes set.
       attr_reader :eventually_due
-
       # Fields that weren't collected by `current_deadline`. These fields need to be collected to enable the capability on the account.
       attr_reader :past_due
-
       # Fields that might become required depending on the results of verification or review. It's an empty array unless an asynchronous verification is pending. If verification fails, these fields move to `eventually_due`, `currently_due`, or `past_due`. Fields might appear in `eventually_due`, `currently_due`, or `past_due` and in `pending_verification` if verification fails but another verification is still pending.
       attr_reader :pending_verification
     end
     # The account for which the capability enables functionality.
     attr_reader :account
-
     # Attribute for field future_requirements
     attr_reader :future_requirements
-
     # The identifier for the capability.
     attr_reader :id
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # Whether the capability has been requested.
     attr_reader :requested
-
     # Time at which the capability was requested. Measured in seconds since the Unix epoch.
     attr_reader :requested_at
-
     # Attribute for field requirements
     attr_reader :requirements
-
     # The status of the capability.
     attr_reader :status
 

data/lib/stripe/resources/capital/financing_offer.rb

@@ -16,17 +16,13 @@ module Stripe
       class AcceptedTerms < Stripe::StripeObject
         # Amount of financing offered, in minor units.
         attr_reader :advance_amount
-
         # Currency that the financing offer is transacted in. For example, `usd`.
         attr_reader :currency
-
         # Fixed fee amount, in minor units.
         attr_reader :fee_amount
-
         # Populated when the `product_type` of the `financingoffer` is `refill`.
         # Represents the discount amount on remaining premium for the existing loan at payout time.
         attr_reader :previous_financing_fee_discount_amount
-
         # Per-transaction rate at which Stripe will withhold funds to repay the financing.
         attr_reader :withhold_rate
       end
@@ -34,22 +30,17 @@ module Stripe
       class OfferedTerms < Stripe::StripeObject
         # Amount of financing offered, in minor units.
         attr_reader :advance_amount
-
         # Describes the type of user the offer is being extended to.
         attr_reader :campaign_type
-
         # Currency that the financing offer is transacted in. For example, `usd`.
         attr_reader :currency
-
         # Fixed fee amount, in minor units.
         attr_reader :fee_amount
-
         # Populated when the `product_type` of the `financingoffer` is `refill`.
         # Represents the discount rate percentage on remaining fee on the existing loan. When the `financing_offer`
         # is paid out, the `previous_financing_fee_discount_amount` will be computed as the multiple of this rate
         # and the remaining fee.
         attr_reader :previous_financing_fee_discount_rate
-
         # Per-transaction rate at which Stripe will withhold funds to repay the financing.
         attr_reader :withhold_rate
       end
@@ -58,13 +49,10 @@ module Stripe
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)
           attr_accessor :gt
-
           # Minimum value to filter by (inclusive)
           attr_accessor :gte
-
           # Maximum value to filter by (exclusive)
           attr_accessor :lt
-
           # Maximum value to filter by (inclusive)
           attr_accessor :lte
 
@@ -77,22 +65,16 @@ module Stripe
         end
         # limit list to offers belonging to given connected account
         attr_accessor :connected_account
-
         # Only return offers that were created during the given date interval.
         attr_accessor :created
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # limit list to offers with given status
         attr_accessor :status
 
@@ -137,51 +119,36 @@ module Stripe
       # the terms accepted by the Connected account, which may differ from those
       # offered.
       attr_reader :accepted_terms
-
       # The ID of the merchant associated with this financing object.
       attr_reader :account
-
       # The time at which this financing offer was charged off, if applicable. Given in seconds since unix epoch.
       attr_reader :charged_off_at
-
       # Time at which the offer was created. Given in seconds since unix epoch.
       attr_reader :created
-
       # Time at which the offer expires. Given in seconds since unix epoch.
       attr_reader :expires_after
-
       # The type of financing being offered.
       attr_reader :financing_type
-
       # A unique identifier for the financing object.
       attr_reader :id
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
-
       # The object type: financing_offer.
       attr_reader :object
-
       # This is an object representing the terms of an offer of financing from
       # Stripe Capital to a Connected account. This resource represents
       # both the terms offered to the Connected account.
       attr_reader :offered_terms
-
       # Financing product identifier.
       attr_reader :product_type
-
       # The ID of the financing offer that replaced this offer.
       attr_reader :replacement
-
       # The ID of the financing offer that this offer is a replacement for.
       attr_reader :replacement_for
-
       # The current status of the offer.
       attr_reader :status
-
       # See [financing_type](https://stripe.com/docs/api/capital/connect_financing_object#financing_offer_object-financing_type).
       attr_reader :type
 

data/lib/stripe/resources/capital/financing_summary.rb

@@ -16,37 +16,27 @@ module Stripe
           # The time at which the minimum payment amount will be due. If not met through withholding, the Connected account's linked bank account or account balance will be debited.
           # Given in seconds since unix epoch.
           attr_reader :due_at
-
           # The amount that has already been paid in the current repayment interval.
           attr_reader :paid_amount
-
           # The amount that is yet to be paid in the current repayment interval.
           attr_reader :remaining_amount
         end
         # Amount of financing offered, in minor units.
         attr_reader :advance_amount
-
         # The time at which the funds were paid out to the connected account's Stripe balance. Given in milliseconds since unix epoch.
         attr_reader :advance_paid_out_at
-
         # Currency that the financing offer is transacted in. For example, `usd`.
         attr_reader :currency
-
         # The chronologically current repayment interval for the financing offer.
         attr_reader :current_repayment_interval
-
         # Fixed fee amount, in minor units.
         attr_reader :fee_amount
-
         # The amount the Connected account has paid toward the financing debt so far.
         attr_reader :paid_amount
-
         # The balance remaining to be paid on the financing, in minor units.
         attr_reader :remaining_amount
-
         # The time at which Capital will begin withholding from payments. Given in seconds since unix epoch.
         attr_reader :repayments_begin_at
-
         # Per-transaction rate at which Stripe will withhold funds to repay the financing.
         attr_reader :withhold_rate
       end
@@ -63,13 +53,10 @@ module Stripe
       # fee amount, withhold rate, remaining amount, paid amount, current repayment interval,
       # repayment start date, and advance payout date.
       attr_reader :details
-
       # The Financing Offer ID this Financing Summary corresponds to
       attr_reader :financing_offer
-
       # The object type: financing_summary
       attr_reader :object
-
       # Status of the Connected Account's financing. [/v1/capital/financing_summary](https://stripe.com/docs/api/capital/financing_summary) will only return `details` for `paid_out` financing.
       attr_reader :status
     end

data/lib/stripe/resources/capital/financing_transaction.rb

@@ -16,32 +16,24 @@ module Stripe
         class Transaction < Stripe::StripeObject
           # The linked payment ID.
           attr_reader :charge
-
           # The linked Treasury Financing Transaction ID.
           attr_reader :treasury_transaction
         end
         # The advance amount being repaid, paid out, or reversed in minor units.
         attr_reader :advance_amount
-
         # The currency of the financing transaction.
         attr_reader :currency
-
         # The fee amount being repaid, paid out, or reversed in minor units.
         attr_reader :fee_amount
-
         # The linked payment for the transaction. This field only applies to financing transactions of type `paydown` and reason `automatic_withholding`.
         attr_reader :linked_payment
-
         # The reason for the financing transaction (if applicable).
         attr_reader :reason
-
         # The reversed transaction. This field only applies to financing
         # transactions of type `reversal`.
         attr_reader :reversed_transaction
-
         # The advance and fee amount being repaid, paid out, or reversed in minor units.
         attr_reader :total_amount
-
         # This is an object representing a linked transaction on a Capital Financing Transaction.
         attr_reader :transaction
       end
@@ -49,25 +41,18 @@ module Stripe
       class ListParams < Stripe::RequestParams
         # For transactions of type `paydown` and reason `automatic_withholding` only, only returns transactions that were created as a result of this charge.
         attr_accessor :charge
-
         # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
         attr_accessor :ending_before
-
         # Specifies which fields in the response should be expanded.
         attr_accessor :expand
-
         # Returns transactions that were created that apply to this financing offer ID.
         attr_accessor :financing_offer
-
         # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
         attr_accessor :limit
-
         # Only returns transactions that are responsible for reversing this financing transaction ID.
         attr_accessor :reversed_transaction
-
         # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
         attr_accessor :starting_after
-
         # For transactions of type `paydown` and reason `automatic_withholding` only, only returns transactions that were created as a result of this Treasury Transaction.
         attr_accessor :treasury_transaction
 
@@ -102,33 +87,24 @@ module Stripe
       end
       # The ID of the merchant associated with this financing transaction.
       attr_reader :account
-
       # Time at which the financing transaction was created. Given in seconds since unix epoch.
       attr_reader :created_at
-
       # This is an object representing a transaction on a Capital financing offer.
       attr_reader :details
-
       # The Capital financing offer for this financing transaction.
       attr_reader :financing_offer
-
       # A unique identifier for the financing transaction object.
       attr_reader :id
-
       # The Capital transaction object that predates the Financing Transactions API and
       # corresponds with the balance transaction that was created as a result of this
       # financing transaction.
       attr_reader :legacy_balance_transaction_source
-
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-
       # The object type: financing_transaction
       attr_reader :object
-
       # The type of the financing transaction.
       attr_reader :type
-
       # A human-friendly description of the financing transaction.
       attr_reader :user_facing_description
 

data/lib/stripe/resources/card.rb

@@ -23,108 +23,76 @@ module Stripe
     end
     # The account this card belongs to. This attribute will not be in the card object if the card belongs to a customer or recipient instead. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts.
     attr_reader :account
-
     # City/District/Suburb/Town/Village.
     attr_reader :address_city
-
     # Billing address country, if provided when creating card.
     attr_reader :address_country
-
     # Address line 1 (Street address/PO Box/Company name).
     attr_reader :address_line1
-
     # If `address_line1` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`.
     attr_reader :address_line1_check
-
     # Address line 2 (Apartment/Suite/Unit/Building).
     attr_reader :address_line2
-
     # State/County/Province/Region.
     attr_reader :address_state
-
     # ZIP or postal code.
     attr_reader :address_zip
-
     # If `address_zip` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`.
     attr_reader :address_zip_check
-
     # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”.
     attr_reader :allow_redisplay
-
     # A set of available payout methods for this card. Only values from this set should be passed as the `method` when creating a payout.
     attr_reader :available_payout_methods
-
     # Card brand. Can be `American Express`, `Diners Club`, `Discover`, `Eftpos Australia`, `Girocard`, `JCB`, `MasterCard`, `UnionPay`, `Visa`, or `Unknown`.
     attr_reader :brand
-
+    # The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card. (For internal use only and not typically available in standard API requests.)
+    attr_reader :brand_product
     # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
     attr_reader :country
-
     # Three-letter [ISO code for currency](https://www.iso.org/iso-4217-currency-codes.html) in lowercase. Must be a [supported currency](https://docs.stripe.com/currencies). Only applicable on accounts (not customers or recipients). The card can be used as a transfer destination for funds in this currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts.
     attr_reader :currency
-
     # The customer that this card belongs to. This attribute will not be in the card object if the card belongs to an account or recipient instead.
     attr_reader :customer
-
     # If a CVC was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. A result of unchecked indicates that CVC was provided but hasn't been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see [Check if a card is valid without a charge](https://support.stripe.com/questions/check-if-a-card-is-valid-without-a-charge).
     attr_reader :cvc_check
-
     # Whether this card is the default external account for its currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts.
     attr_reader :default_for_currency
-
     # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
     attr_reader :description
-
     # (For tokenized numbers only.) The last four digits of the device account number.
     attr_reader :dynamic_last4
-
     # Two-digit number representing the card's expiration month.
     attr_reader :exp_month
-
     # Four-digit number representing the card's expiration year.
     attr_reader :exp_year
-
     # Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.
     #
     # *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.*
     attr_reader :fingerprint
-
     # Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`.
     attr_reader :funding
-
     # Unique identifier for the object.
     attr_reader :id
-
     # Issuer identification number of the card. (For internal use only and not typically available in standard API requests.)
     attr_reader :iin
-
     # The name of the card's issuing bank. (For internal use only and not typically available in standard API requests.)
     attr_reader :issuer
-
     # The last four digits of the card.
     attr_reader :last4
-
     # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     attr_reader :metadata
-
     # Cardholder name.
     attr_reader :name
-
     # Attribute for field networks
     attr_reader :networks
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # Status of a card based on the card issuer.
     attr_reader :regulated_status
-
     # For external accounts that are cards, possible values are `new` and `errored`. If a payout fails, the status is set to `errored` and [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) are stopped until account details are updated.
     attr_reader :status
-
     # If the card number is tokenized, this is the method that was used. Can be `android_pay` (includes Google Pay), `apple_pay`, `masterpass`, `visa_checkout`, or null.
     attr_reader :tokenization_method
-
     # Always true for a deleted object
     attr_reader :deleted
 

data/lib/stripe/resources/cash_balance.rb

@@ -12,22 +12,17 @@ module Stripe
     class Settings < Stripe::StripeObject
       # The configuration for how funds that land in the customer cash balance are reconciled.
       attr_reader :reconciliation_mode
-
       # A flag to indicate if reconciliation mode returned is the user's default or is specific to this customer cash balance
       attr_reader :using_merchant_default
     end
     # A hash of all cash balances available to this customer. You cannot delete a customer with any cash balances, even if the balance is 0. Amounts are represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
     attr_reader :available
-
     # The ID of the customer whose cash balance this object represents.
     attr_reader :customer
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     attr_reader :livemode
-
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
-
     # Attribute for field settings
     attr_reader :settings