stripe 13.4.0.pre.beta.1 → 13.4.0.pre.beta.3

data/rbi/stripe/resources/confirmation_token.rbi

@@ -17,7 +17,6 @@ module Stripe
           # The IP address from which the Mandate was accepted by the customer.
           sig { returns(T.nilable(String)) }
           attr_reader :ip_address
-
           # The user agent of the browser from which the Mandate was accepted by the customer.
           sig { returns(T.nilable(String)) }
           attr_reader :user_agent
@@ -25,7 +24,6 @@ module Stripe
         # If this is a Mandate accepted online, this hash contains details about the online acceptance.
         sig { returns(T.nilable(Online)) }
         attr_reader :online
-
         # The type of customer acceptance information included with the Mandate.
         sig { returns(String) }
         attr_reader :type
@@ -49,19 +47,15 @@ module Stripe
         # Name of the bank associated with the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :bank_name
-
         # Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Institution number of the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :institution_number
-
         # Last four digits of the bank account number.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # Transit number of the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :transit_number
@@ -75,11 +69,9 @@ module Stripe
         # Six-digit number identifying bank and branch associated with this bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :bsb_number
-
         # Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Last four digits of the bank account number.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
@@ -88,11 +80,9 @@ module Stripe
         # Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Last four digits of the bank account number.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # Sort code of the bank account. (e.g., `10-20-30`)
         sig { returns(T.nilable(String)) }
         attr_reader :sort_code
@@ -103,23 +93,18 @@ module Stripe
           # City, district, suburb, town, or village.
           sig { returns(T.nilable(String)) }
           attr_reader :city
-
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
           sig { returns(T.nilable(String)) }
           attr_reader :country
-
           # Address line 1 (e.g., street, PO Box, or company name).
           sig { returns(T.nilable(String)) }
           attr_reader :line1
-
           # Address line 2 (e.g., apartment, suite, unit, or building).
           sig { returns(T.nilable(String)) }
           attr_reader :line2
-
           # ZIP or postal code.
           sig { returns(T.nilable(String)) }
           attr_reader :postal_code
-
           # State, county, province, or region.
           sig { returns(T.nilable(String)) }
           attr_reader :state
@@ -127,15 +112,12 @@ module Stripe
         # Billing address.
         sig { returns(T.nilable(Address)) }
         attr_reader :address
-
         # Email address.
         sig { returns(T.nilable(String)) }
         attr_reader :email
-
         # Full name.
         sig { returns(T.nilable(String)) }
         attr_reader :name
-
         # Billing phone number (including extension).
         sig { returns(T.nilable(String)) }
         attr_reader :phone
@@ -151,11 +133,9 @@ module Stripe
           # If a address line1 was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`.
           sig { returns(T.nilable(String)) }
           attr_reader :address_line1_check
-
           # If a address postal code was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`.
           sig { returns(T.nilable(String)) }
           attr_reader :address_postal_code_check
-
           # If a CVC was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`.
           sig { returns(T.nilable(String)) }
           attr_reader :cvc_check
@@ -167,7 +147,6 @@ module Stripe
                 # Time at which the payment was collected while offline
                 sig { returns(T.nilable(Integer)) }
                 attr_reader :stored_at
-
                 # The method used to process this payment method offline. Only deferred is allowed.
                 sig { returns(T.nilable(String)) }
                 attr_reader :type
@@ -176,35 +155,27 @@ module Stripe
                 # The type of account being debited or credited
                 sig { returns(String) }
                 attr_reader :account_type
-
                 # EMV tag 9F26, cryptogram generated by the integrated circuit chip.
                 sig { returns(T.nilable(String)) }
                 attr_reader :application_cryptogram
-
                 # Mnenomic of the Application Identifier.
                 sig { returns(T.nilable(String)) }
                 attr_reader :application_preferred_name
-
                 # Identifier for this transaction.
                 sig { returns(T.nilable(String)) }
                 attr_reader :authorization_code
-
                 # EMV tag 8A. A code returned by the card issuer.
                 sig { returns(T.nilable(String)) }
                 attr_reader :authorization_response_code
-
                 # Describes the method used by the cardholder to verify ownership of the card. One of the following: `approval`, `failure`, `none`, `offline_pin`, `offline_pin_and_signature`, `online_pin`, or `signature`.
                 sig { returns(T.nilable(String)) }
                 attr_reader :cardholder_verification_method
-
                 # EMV tag 84. Similar to the application identifier stored on the integrated circuit chip.
                 sig { returns(T.nilable(String)) }
                 attr_reader :dedicated_file_name
-
                 # The outcome of a series of EMV functions performed by the card reader.
                 sig { returns(T.nilable(String)) }
                 attr_reader :terminal_verification_results
-
                 # An indication of various EMV functions performed during the transaction.
                 sig { returns(T.nilable(String)) }
                 attr_reader :transaction_status_information
@@ -217,101 +188,77 @@ module Stripe
               # The authorized amount
               sig { returns(T.nilable(Integer)) }
               attr_reader :amount_authorized
-
               # Card brand. Can be `amex`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`.
               sig { returns(T.nilable(String)) }
               attr_reader :brand
-
               # The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card.
               sig { returns(T.nilable(String)) }
               attr_reader :brand_product
-
               # When using manual capture, a future timestamp after which the charge will be automatically refunded if uncaptured.
               sig { returns(Integer) }
               attr_reader :capture_before
-
               # The cardholder name as read from the card, in [ISO 7813](https://en.wikipedia.org/wiki/ISO/IEC_7813) format. May include alphanumeric characters, special characters and first/last name separator (`/`). In some cases, the cardholder name may not be available depending on how the issuer has configured the card. Cardholder name is typically not available on swipe or contactless payments, such as those made with Apple Pay and Google Pay.
               sig { returns(T.nilable(String)) }
               attr_reader :cardholder_name
-
               # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
               sig { returns(T.nilable(String)) }
               attr_reader :country
-
               # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
               sig { returns(T.nilable(String)) }
               attr_reader :description
-
               # Authorization response cryptogram.
               sig { returns(T.nilable(String)) }
               attr_reader :emv_auth_data
-
               # Two-digit number representing the card's expiration month.
               sig { returns(Integer) }
               attr_reader :exp_month
-
               # Four-digit number representing the card's expiration year.
               sig { returns(Integer) }
               attr_reader :exp_year
-
               # Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.
               #
               # *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.*
               sig { returns(T.nilable(String)) }
               attr_reader :fingerprint
-
               # Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`.
               sig { returns(T.nilable(String)) }
               attr_reader :funding
-
               # ID of a card PaymentMethod generated from the card_present PaymentMethod that may be attached to a Customer for future transactions. Only present if it was possible to generate a card PaymentMethod.
               sig { returns(T.nilable(String)) }
               attr_reader :generated_card
-
               # Issuer identification number of the card. (For internal use only and not typically available in standard API requests.)
               sig { returns(T.nilable(String)) }
               attr_reader :iin
-
               # Whether this [PaymentIntent](https://stripe.com/docs/api/payment_intents) is eligible for incremental authorizations. Request support using [request_incremental_authorization_support](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-payment_method_options-card_present-request_incremental_authorization_support).
               sig { returns(T::Boolean) }
               attr_reader :incremental_authorization_supported
-
               # The name of the card's issuing bank. (For internal use only and not typically available in standard API requests.)
               sig { returns(T.nilable(String)) }
               attr_reader :issuer
-
               # The last four digits of the card.
               sig { returns(T.nilable(String)) }
               attr_reader :last4
-
               # Identifies which network this charge was processed on. Can be `amex`, `cartes_bancaires`, `diners`, `discover`, `eftpos_au`, `interac`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`.
               sig { returns(T.nilable(String)) }
               attr_reader :network
-
               # This is used by the financial networks to identify a transaction. Visa calls this the Transaction ID, Mastercard calls this the Trace ID, and American Express calls this the Acquirer Reference Data. The first three digits of the Trace ID is the Financial Network Code, the next 6 digits is the Banknet Reference Number, and the last 4 digits represent the date (MM/DD). This field will be available for successful Visa, Mastercard, or American Express transactions and always null for other card brands.
               sig { returns(T.nilable(String)) }
               attr_reader :network_transaction_id
-
               # Details about payments collected offline.
               sig { returns(T.nilable(Offline)) }
               attr_reader :offline
-
               # Defines whether the authorized amount can be over-captured or not
               sig { returns(T::Boolean) }
               attr_reader :overcapture_supported
-
               # EMV tag 5F2D. Preferred languages specified by the integrated circuit chip.
               sig { returns(T.nilable(T::Array[String])) }
               attr_reader :preferred_locales
-
               # How card details were read in this transaction.
               sig { returns(T.nilable(String)) }
               attr_reader :read_method
-
               # A collection of fields required to be displayed on receipts. Only required for EMV transactions.
               sig { returns(T.nilable(Receipt)) }
               attr_reader :receipt
-
               # Attribute for field wallet
               sig { returns(Wallet) }
               attr_reader :wallet
@@ -319,7 +266,6 @@ module Stripe
             # Attribute for field card_present
             sig { returns(CardPresent) }
             attr_reader :card_present
-
             # The type of payment method transaction-specific details from the transaction that generated this `card` payment method. Always `card_present`.
             sig { returns(String) }
             attr_reader :type
@@ -327,11 +273,9 @@ module Stripe
           # The charge that created this object.
           sig { returns(T.nilable(String)) }
           attr_reader :charge
-
           # Transaction-specific details of the payment method used in the payment.
           sig { returns(T.nilable(PaymentMethodDetails)) }
           attr_reader :payment_method_details
-
           # The ID of the SetupAttempt that generated this PaymentMethod, if any.
           sig { returns(T.nilable(T.any(String, Stripe::SetupAttempt))) }
           attr_reader :setup_attempt
@@ -340,7 +284,6 @@ module Stripe
           # All available networks for the card.
           sig { returns(T::Array[String]) }
           attr_reader :available
-
           # The preferred network for co-branded cards. Can be `cartes_bancaires`, `mastercard`, `visa` or `invalid_preference` if requested network is not valid for the card.
           sig { returns(T.nilable(String)) }
           attr_reader :preferred
@@ -360,23 +303,18 @@ module Stripe
               # City, district, suburb, town, or village.
               sig { returns(T.nilable(String)) }
               attr_reader :city
-
               # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
               sig { returns(T.nilable(String)) }
               attr_reader :country
-
               # Address line 1 (e.g., street, PO Box, or company name).
               sig { returns(T.nilable(String)) }
               attr_reader :line1
-
               # Address line 2 (e.g., apartment, suite, unit, or building).
               sig { returns(T.nilable(String)) }
               attr_reader :line2
-
               # ZIP or postal code.
               sig { returns(T.nilable(String)) }
               attr_reader :postal_code
-
               # State, county, province, or region.
               sig { returns(T.nilable(String)) }
               attr_reader :state
@@ -385,23 +323,18 @@ module Stripe
               # City, district, suburb, town, or village.
               sig { returns(T.nilable(String)) }
               attr_reader :city
-
               # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
               sig { returns(T.nilable(String)) }
               attr_reader :country
-
               # Address line 1 (e.g., street, PO Box, or company name).
               sig { returns(T.nilable(String)) }
               attr_reader :line1
-
               # Address line 2 (e.g., apartment, suite, unit, or building).
               sig { returns(T.nilable(String)) }
               attr_reader :line2
-
               # ZIP or postal code.
               sig { returns(T.nilable(String)) }
               attr_reader :postal_code
-
               # State, county, province, or region.
               sig { returns(T.nilable(String)) }
               attr_reader :state
@@ -409,15 +342,12 @@ module Stripe
             # Owner's verified billing address. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(BillingAddress)) }
             attr_reader :billing_address
-
             # Owner's verified email. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(String)) }
             attr_reader :email
-
             # Owner's verified full name. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(String)) }
             attr_reader :name
-
             # Owner's verified shipping address. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(ShippingAddress)) }
             attr_reader :shipping_address
@@ -428,23 +358,18 @@ module Stripe
               # City, district, suburb, town, or village.
               sig { returns(T.nilable(String)) }
               attr_reader :city
-
               # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
               sig { returns(T.nilable(String)) }
               attr_reader :country
-
               # Address line 1 (e.g., street, PO Box, or company name).
               sig { returns(T.nilable(String)) }
               attr_reader :line1
-
               # Address line 2 (e.g., apartment, suite, unit, or building).
               sig { returns(T.nilable(String)) }
               attr_reader :line2
-
               # ZIP or postal code.
               sig { returns(T.nilable(String)) }
               attr_reader :postal_code
-
               # State, county, province, or region.
               sig { returns(T.nilable(String)) }
               attr_reader :state
@@ -453,23 +378,18 @@ module Stripe
               # City, district, suburb, town, or village.
               sig { returns(T.nilable(String)) }
               attr_reader :city
-
               # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
               sig { returns(T.nilable(String)) }
               attr_reader :country
-
               # Address line 1 (e.g., street, PO Box, or company name).
               sig { returns(T.nilable(String)) }
               attr_reader :line1
-
               # Address line 2 (e.g., apartment, suite, unit, or building).
               sig { returns(T.nilable(String)) }
               attr_reader :line2
-
               # ZIP or postal code.
               sig { returns(T.nilable(String)) }
               attr_reader :postal_code
-
               # State, county, province, or region.
               sig { returns(T.nilable(String)) }
               attr_reader :state
@@ -477,15 +397,12 @@ module Stripe
             # Owner's verified billing address. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(BillingAddress)) }
             attr_reader :billing_address
-
             # Owner's verified email. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(String)) }
             attr_reader :email
-
             # Owner's verified full name. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(String)) }
             attr_reader :name
-
             # Owner's verified shipping address. Values are verified or provided by the wallet directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
             sig { returns(T.nilable(ShippingAddress)) }
             attr_reader :shipping_address
@@ -493,35 +410,27 @@ module Stripe
           # Attribute for field amex_express_checkout
           sig { returns(AmexExpressCheckout) }
           attr_reader :amex_express_checkout
-
           # Attribute for field apple_pay
           sig { returns(ApplePay) }
           attr_reader :apple_pay
-
           # (For tokenized numbers only.) The last four digits of the device account number.
           sig { returns(T.nilable(String)) }
           attr_reader :dynamic_last4
-
           # Attribute for field google_pay
           sig { returns(GooglePay) }
           attr_reader :google_pay
-
           # Attribute for field link
           sig { returns(Link) }
           attr_reader :link
-
           # Attribute for field masterpass
           sig { returns(Masterpass) }
           attr_reader :masterpass
-
           # Attribute for field samsung_pay
           sig { returns(SamsungPay) }
           attr_reader :samsung_pay
-
           # The type of the card wallet, one of `amex_express_checkout`, `apple_pay`, `google_pay`, `masterpass`, `samsung_pay`, `visa_checkout`, or `link`. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.
           sig { returns(String) }
           attr_reader :type
-
           # Attribute for field visa_checkout
           sig { returns(VisaCheckout) }
           attr_reader :visa_checkout
@@ -529,69 +438,53 @@ module Stripe
         # Card brand. Can be `amex`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`.
         sig { returns(String) }
         attr_reader :brand
-
         # Checks on Card address and CVC if provided.
         sig { returns(T.nilable(Checks)) }
         attr_reader :checks
-
         # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
         sig { returns(T.nilable(String)) }
         attr_reader :country
-
         # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :description
-
         # The brand to use when displaying the card, this accounts for customer's brand choice on dual-branded cards. Can be `american_express`, `cartes_bancaires`, `diners_club`, `discover`, `eftpos_australia`, `interac`, `jcb`, `mastercard`, `union_pay`, `visa`, or `other` and may contain more values in the future.
         sig { returns(T.nilable(String)) }
         attr_reader :display_brand
-
         # Two-digit number representing the card's expiration month.
         sig { returns(Integer) }
         attr_reader :exp_month
-
         # Four-digit number representing the card's expiration year.
         sig { returns(Integer) }
         attr_reader :exp_year
-
         # Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.
         #
         # *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.*
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`.
         sig { returns(String) }
         attr_reader :funding
-
         # Details of the original PaymentMethod that created this object.
         sig { returns(T.nilable(GeneratedFrom)) }
         attr_reader :generated_from
-
         # Issuer identification number of the card. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :iin
-
         # The name of the card's issuing bank. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :issuer
-
         # The last four digits of the card.
         sig { returns(String) }
         attr_reader :last4
-
         # Contains information about card networks that can be used to process the payment.
         sig { returns(T.nilable(Networks)) }
         attr_reader :networks
-
         # Status of a card based on the card issuer.
         sig { returns(T.nilable(String)) }
         attr_reader :regulated_status
-
         # Contains details on how this Card may be used for 3D Secure authentication.
         sig { returns(T.nilable(ThreeDSecureUsage)) }
         attr_reader :three_d_secure_usage
-
         # If this Card is part of a card wallet, this contains the details of the card wallet.
         sig { returns(T.nilable(Wallet)) }
         attr_reader :wallet
@@ -601,7 +494,6 @@ module Stripe
           # All available networks for the card.
           sig { returns(T::Array[String]) }
           attr_reader :available
-
           # The preferred network for the card.
           sig { returns(T.nilable(String)) }
           attr_reader :preferred
@@ -610,7 +502,6 @@ module Stripe
           # Time at which the payment was collected while offline
           sig { returns(T.nilable(Integer)) }
           attr_reader :stored_at
-
           # The method used to process this payment method offline. Only deferred is allowed.
           sig { returns(T.nilable(String)) }
           attr_reader :type
@@ -623,69 +514,53 @@ module Stripe
         # Card brand. Can be `amex`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`.
         sig { returns(T.nilable(String)) }
         attr_reader :brand
-
         # The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card.
         sig { returns(T.nilable(String)) }
         attr_reader :brand_product
-
         # The cardholder name as read from the card, in [ISO 7813](https://en.wikipedia.org/wiki/ISO/IEC_7813) format. May include alphanumeric characters, special characters and first/last name separator (`/`). In some cases, the cardholder name may not be available depending on how the issuer has configured the card. Cardholder name is typically not available on swipe or contactless payments, such as those made with Apple Pay and Google Pay.
         sig { returns(T.nilable(String)) }
         attr_reader :cardholder_name
-
         # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
         sig { returns(T.nilable(String)) }
         attr_reader :country
-
         # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :description
-
         # Two-digit number representing the card's expiration month.
         sig { returns(Integer) }
         attr_reader :exp_month
-
         # Four-digit number representing the card's expiration year.
         sig { returns(Integer) }
         attr_reader :exp_year
-
         # Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.
         #
         # *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.*
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`.
         sig { returns(T.nilable(String)) }
         attr_reader :funding
-
         # Issuer identification number of the card. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :iin
-
         # The name of the card's issuing bank. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :issuer
-
         # The last four digits of the card.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # Contains information about card networks that can be used to process the payment.
         sig { returns(T.nilable(Networks)) }
         attr_reader :networks
-
         # Details about payment methods collected offline.
         sig { returns(T.nilable(Offline)) }
         attr_reader :offline
-
         # EMV tag 5F2D. Preferred languages specified by the integrated circuit chip.
         sig { returns(T.nilable(T::Array[String])) }
         attr_reader :preferred_locales
-
         # How card details were read in this transaction.
         sig { returns(T.nilable(String)) }
         attr_reader :read_method
-
         # Attribute for field wallet
         sig { returns(Wallet) }
         attr_reader :wallet
@@ -694,7 +569,6 @@ module Stripe
         # A unique and immutable identifier assigned by Cash App to every buyer.
         sig { returns(T.nilable(String)) }
         attr_reader :buyer_id
-
         # A public identifier for buyers using Cash App.
         sig { returns(T.nilable(String)) }
         attr_reader :cashtag
@@ -709,7 +583,6 @@ module Stripe
         # Account holder type, if provided. Can be one of `individual` or `company`.
         sig { returns(T.nilable(String)) }
         attr_reader :account_holder_type
-
         # The customer's bank, if provided. Can be one of `affin_bank`, `agrobank`, `alliance_bank`, `ambank`, `bank_islam`, `bank_muamalat`, `bank_rakyat`, `bsn`, `cimb`, `hong_leong_bank`, `hsbc`, `kfh`, `maybank2u`, `ocbc`, `public_bank`, `rhb`, `standard_chartered`, `uob`, `deutsche_bank`, `maybank2e`, `pb_enterprise`, or `bank_of_china`.
         sig { returns(String) }
         attr_reader :bank
@@ -721,15 +594,12 @@ module Stripe
         # Attribute for field bank
         sig { returns(T.nilable(String)) }
         attr_reader :bank
-
         # Attribute for field bank_code
         sig { returns(T.nilable(String)) }
         attr_reader :bank_code
-
         # Attribute for field bank_name
         sig { returns(T.nilable(String)) }
         attr_reader :bank_name
-
         # Attribute for field display_name
         sig { returns(T.nilable(String)) }
         attr_reader :display_name
@@ -738,7 +608,6 @@ module Stripe
         # The customer's bank, if provided. Can be one of `abn_amro`, `asn_bank`, `bunq`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
         sig { returns(T.nilable(String)) }
         attr_reader :bank
-
         # The Bank Identifier Code of the customer's bank, if the bank was provided.
         sig { returns(T.nilable(String)) }
         attr_reader :bic
@@ -748,7 +617,6 @@ module Stripe
           # All available networks for the card.
           sig { returns(T::Array[String]) }
           attr_reader :available
-
           # The preferred network for the card.
           sig { returns(T.nilable(String)) }
           attr_reader :preferred
@@ -756,57 +624,44 @@ module Stripe
         # Card brand. Can be `interac`, `mastercard` or `visa`.
         sig { returns(T.nilable(String)) }
         attr_reader :brand
-
         # The cardholder name as read from the card, in [ISO 7813](https://en.wikipedia.org/wiki/ISO/IEC_7813) format. May include alphanumeric characters, special characters and first/last name separator (`/`). In some cases, the cardholder name may not be available depending on how the issuer has configured the card. Cardholder name is typically not available on swipe or contactless payments, such as those made with Apple Pay and Google Pay.
         sig { returns(T.nilable(String)) }
         attr_reader :cardholder_name
-
         # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
         sig { returns(T.nilable(String)) }
         attr_reader :country
-
         # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :description
-
         # Two-digit number representing the card's expiration month.
         sig { returns(Integer) }
         attr_reader :exp_month
-
         # Four-digit number representing the card's expiration year.
         sig { returns(Integer) }
         attr_reader :exp_year
-
         # Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.
         #
         # *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.*
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`.
         sig { returns(T.nilable(String)) }
         attr_reader :funding
-
         # Issuer identification number of the card. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :iin
-
         # The name of the card's issuing bank. (For internal use only and not typically available in standard API requests.)
         sig { returns(T.nilable(String)) }
         attr_reader :issuer
-
         # The last four digits of the card.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # Contains information about card networks that can be used to process the payment.
         sig { returns(T.nilable(Networks)) }
         attr_reader :networks
-
         # EMV tag 5F2D. Preferred languages specified by the integrated circuit chip.
         sig { returns(T.nilable(T::Array[String])) }
         attr_reader :preferred_locales
-
         # How card details were read in this transaction.
         sig { returns(T.nilable(String)) }
         attr_reader :read_method
@@ -817,11 +672,9 @@ module Stripe
           # The day of birth, between 1 and 31.
           sig { returns(T.nilable(Integer)) }
           attr_reader :day
-
           # The month of birth, between 1 and 12.
           sig { returns(T.nilable(Integer)) }
           attr_reader :month
-
           # The four-digit year of birth.
           sig { returns(T.nilable(Integer)) }
           attr_reader :year
@@ -835,7 +688,6 @@ module Stripe
         # The local credit or debit card brand.
         sig { returns(T.nilable(String)) }
         attr_reader :brand
-
         # The last four digits of the card. This may not be present for American Express cards.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
@@ -844,7 +696,6 @@ module Stripe
         # Account owner's email address.
         sig { returns(T.nilable(String)) }
         attr_reader :email
-
         # [Deprecated] This is a legacy parameter that no longer has any function.
         sig { returns(String) }
         attr_reader :persistent_token
@@ -863,22 +714,23 @@ module Stripe
         sig { returns(T.nilable(String)) }
         attr_reader :bank
       end
+      class PayByBank < Stripe::StripeObject; end
       class Payco < Stripe::StripeObject; end
       class Paynow < Stripe::StripeObject; end
       class Paypal < Stripe::StripeObject
+        # Two-letter ISO code representing the buyer's country. Values are provided by PayPal directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
+        sig { returns(T.nilable(String)) }
+        attr_reader :country
         # Uniquely identifies this particular PayPal account. You can use this attribute to check whether two PayPal accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Owner's email. Values are provided by PayPal directly
         # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
         sig { returns(T.nilable(String)) }
         attr_reader :payer_email
-
         # PayPal account PayerID. This identifier uniquely identifies the PayPal customer.
         sig { returns(T.nilable(String)) }
         attr_reader :payer_id
-
         # Owner's verified email. Values are verified or provided by PayPal directly
         # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
         sig { returns(T.nilable(String)) }
@@ -888,11 +740,9 @@ module Stripe
         # Bank-State-Branch number of the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :bsb_number
-
         # Last four digits of the bank account number.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # The PayID alias for the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :pay_id
@@ -905,11 +755,9 @@ module Stripe
           # The day of birth, between 1 and 31.
           sig { returns(Integer) }
           attr_reader :day
-
           # The month of birth, between 1 and 12.
           sig { returns(Integer) }
           attr_reader :month
-
           # The four-digit year of birth.
           sig { returns(Integer) }
           attr_reader :year
@@ -925,7 +773,6 @@ module Stripe
           # The ID of the Charge that generated this PaymentMethod, if any.
           sig { returns(T.nilable(T.any(String, Stripe::Charge))) }
           attr_reader :charge
-
           # The ID of the SetupAttempt that generated this PaymentMethod, if any.
           sig { returns(T.nilable(T.any(String, Stripe::SetupAttempt))) }
           attr_reader :setup_attempt
@@ -933,23 +780,18 @@ module Stripe
         # Bank code of bank associated with the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :bank_code
-
         # Branch code of bank associated with the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :branch_code
-
         # Two-letter ISO code representing the country the bank account is located in.
         sig { returns(T.nilable(String)) }
         attr_reader :country
-
         # Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Information about the object that generated this PaymentMethod.
         sig { returns(T.nilable(GeneratedFrom)) }
         attr_reader :generated_from
-
         # Last four characters of the IBAN.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
@@ -967,7 +809,6 @@ module Stripe
           # The preferred network.
           sig { returns(T.nilable(String)) }
           attr_reader :preferred
-
           # All supported networks.
           sig { returns(T::Array[String]) }
           attr_reader :supported
@@ -977,7 +818,6 @@ module Stripe
             # The ACH network code that resulted in this block.
             sig { returns(T.nilable(String)) }
             attr_reader :network_code
-
             # The reason why this PaymentMethod's fingerprint has been blocked
             sig { returns(T.nilable(String)) }
             attr_reader :reason
@@ -989,39 +829,30 @@ module Stripe
         # Account holder type: individual or company.
         sig { returns(T.nilable(String)) }
         attr_reader :account_holder_type
-
         # Account number of the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :account_number
-
         # Account type: checkings or savings. Defaults to checking if omitted.
         sig { returns(T.nilable(String)) }
         attr_reader :account_type
-
         # The name of the bank.
         sig { returns(T.nilable(String)) }
         attr_reader :bank_name
-
         # The ID of the Financial Connections Account used to create the payment method.
         sig { returns(T.nilable(String)) }
         attr_reader :financial_connections_account
-
         # Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same.
         sig { returns(T.nilable(String)) }
         attr_reader :fingerprint
-
         # Last four digits of the bank account number.
         sig { returns(T.nilable(String)) }
         attr_reader :last4
-
         # Contains information about US bank account networks that can be used.
         sig { returns(T.nilable(Networks)) }
         attr_reader :networks
-
         # Routing number of the bank account.
         sig { returns(T.nilable(String)) }
         attr_reader :routing_number
-
         # Contains information about the future reusability of this PaymentMethod.
         sig { returns(T.nilable(StatusDetails)) }
         attr_reader :status_details
@@ -1031,223 +862,171 @@ module Stripe
       # Attribute for field acss_debit
       sig { returns(AcssDebit) }
       attr_reader :acss_debit
-
       # Attribute for field affirm
       sig { returns(Affirm) }
       attr_reader :affirm
-
       # Attribute for field afterpay_clearpay
       sig { returns(AfterpayClearpay) }
       attr_reader :afterpay_clearpay
-
       # Attribute for field alipay
       sig { returns(Alipay) }
       attr_reader :alipay
-
       # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”.
       sig { returns(String) }
       attr_reader :allow_redisplay
-
       # Attribute for field alma
       sig { returns(Alma) }
       attr_reader :alma
-
       # Attribute for field amazon_pay
       sig { returns(AmazonPay) }
       attr_reader :amazon_pay
-
       # Attribute for field au_becs_debit
       sig { returns(AuBecsDebit) }
       attr_reader :au_becs_debit
-
       # Attribute for field bacs_debit
       sig { returns(BacsDebit) }
       attr_reader :bacs_debit
-
       # Attribute for field bancontact
       sig { returns(Bancontact) }
       attr_reader :bancontact
-
       # Attribute for field billing_details
       sig { returns(BillingDetails) }
       attr_reader :billing_details
-
       # Attribute for field blik
       sig { returns(Blik) }
       attr_reader :blik
-
       # Attribute for field boleto
       sig { returns(Boleto) }
       attr_reader :boleto
-
       # Attribute for field card
       sig { returns(Card) }
       attr_reader :card
-
       # Attribute for field card_present
       sig { returns(CardPresent) }
       attr_reader :card_present
-
       # Attribute for field cashapp
       sig { returns(Cashapp) }
       attr_reader :cashapp
-
       # The ID of the Customer to which this PaymentMethod is saved. This will not be set when the PaymentMethod has not been saved to a Customer.
       sig { returns(T.nilable(T.any(String, Stripe::Customer))) }
       attr_reader :customer
-
       # Attribute for field customer_balance
       sig { returns(CustomerBalance) }
       attr_reader :customer_balance
-
       # Attribute for field eps
       sig { returns(Eps) }
       attr_reader :eps
-
       # Attribute for field fpx
       sig { returns(Fpx) }
       attr_reader :fpx
-
       # Attribute for field giropay
       sig { returns(Giropay) }
       attr_reader :giropay
-
       # Attribute for field gopay
       sig { returns(Gopay) }
       attr_reader :gopay
-
       # Attribute for field grabpay
       sig { returns(Grabpay) }
       attr_reader :grabpay
-
       # Attribute for field id_bank_transfer
       sig { returns(IdBankTransfer) }
       attr_reader :id_bank_transfer
-
       # Attribute for field ideal
       sig { returns(Ideal) }
       attr_reader :ideal
-
       # Attribute for field interac_present
       sig { returns(InteracPresent) }
       attr_reader :interac_present
-
       # Attribute for field kakao_pay
       sig { returns(KakaoPay) }
       attr_reader :kakao_pay
-
       # Attribute for field klarna
       sig { returns(Klarna) }
       attr_reader :klarna
-
       # Attribute for field konbini
       sig { returns(Konbini) }
       attr_reader :konbini
-
       # Attribute for field kr_card
       sig { returns(KrCard) }
       attr_reader :kr_card
-
       # Attribute for field link
       sig { returns(Link) }
       attr_reader :link
-
       # Attribute for field mb_way
       sig { returns(MbWay) }
       attr_reader :mb_way
-
       # Attribute for field mobilepay
       sig { returns(Mobilepay) }
       attr_reader :mobilepay
-
       # Attribute for field multibanco
       sig { returns(Multibanco) }
       attr_reader :multibanco
-
       # Attribute for field naver_pay
       sig { returns(NaverPay) }
       attr_reader :naver_pay
-
       # Attribute for field oxxo
       sig { returns(Oxxo) }
       attr_reader :oxxo
-
       # Attribute for field p24
       sig { returns(P24) }
       attr_reader :p24
-
+      # Attribute for field pay_by_bank
+      sig { returns(PayByBank) }
+      attr_reader :pay_by_bank
       # Attribute for field payco
       sig { returns(Payco) }
       attr_reader :payco
-
       # Attribute for field paynow
       sig { returns(Paynow) }
       attr_reader :paynow
-
       # Attribute for field paypal
       sig { returns(Paypal) }
       attr_reader :paypal
-
       # Attribute for field payto
       sig { returns(Payto) }
       attr_reader :payto
-
       # Attribute for field pix
       sig { returns(Pix) }
       attr_reader :pix
-
       # Attribute for field promptpay
       sig { returns(Promptpay) }
       attr_reader :promptpay
-
       # Attribute for field qris
       sig { returns(Qris) }
       attr_reader :qris
-
       # Attribute for field rechnung
       sig { returns(Rechnung) }
       attr_reader :rechnung
-
       # Attribute for field revolut_pay
       sig { returns(RevolutPay) }
       attr_reader :revolut_pay
-
       # Attribute for field samsung_pay
       sig { returns(SamsungPay) }
       attr_reader :samsung_pay
-
       # Attribute for field sepa_debit
       sig { returns(SepaDebit) }
       attr_reader :sepa_debit
-
       # Attribute for field shopeepay
       sig { returns(Shopeepay) }
       attr_reader :shopeepay
-
       # Attribute for field sofort
       sig { returns(Sofort) }
       attr_reader :sofort
-
       # Attribute for field swish
       sig { returns(Swish) }
       attr_reader :swish
-
       # Attribute for field twint
       sig { returns(Twint) }
       attr_reader :twint
-
       # The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
       sig { returns(String) }
       attr_reader :type
-
       # Attribute for field us_bank_account
       sig { returns(UsBankAccount) }
       attr_reader :us_bank_account
-
       # Attribute for field wechat_pay
       sig { returns(WechatPay) }
       attr_reader :wechat_pay
-
       # Attribute for field zip
       sig { returns(Zip) }
       attr_reader :zip
@@ -1257,23 +1036,18 @@ module Stripe
         # City, district, suburb, town, or village.
         sig { returns(T.nilable(String)) }
         attr_reader :city
-
         # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
         sig { returns(T.nilable(String)) }
         attr_reader :country
-
         # Address line 1 (e.g., street, PO Box, or company name).
         sig { returns(T.nilable(String)) }
         attr_reader :line1
-
         # Address line 2 (e.g., apartment, suite, unit, or building).
         sig { returns(T.nilable(String)) }
         attr_reader :line2
-
         # ZIP or postal code.
         sig { returns(T.nilable(String)) }
         attr_reader :postal_code
-
         # State, county, province, or region.
         sig { returns(T.nilable(String)) }
         attr_reader :state
@@ -1281,11 +1055,9 @@ module Stripe
       # Attribute for field address
       sig { returns(Address) }
       attr_reader :address
-
       # Recipient name.
       sig { returns(String) }
       attr_reader :name
-
       # Recipient phone (including extension).
       sig { returns(T.nilable(String)) }
       attr_reader :phone
@@ -1293,66 +1065,51 @@ module Stripe
     # Time at which the object was created. Measured in seconds since the Unix epoch.
     sig { returns(Integer) }
     attr_reader :created
-
     # Time at which this ConfirmationToken expires and can no longer be used to confirm a PaymentIntent or SetupIntent.
     sig { returns(T.nilable(Integer)) }
     attr_reader :expires_at
-
     # Unique identifier for the object.
     sig { returns(String) }
     attr_reader :id
-
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     sig { returns(T::Boolean) }
     attr_reader :livemode
-
     # Data used for generating a Mandate.
     sig { returns(T.nilable(MandateData)) }
     attr_reader :mandate_data
-
     # String representing the object's type. Objects of the same type share the same value.
     sig { returns(String) }
     attr_reader :object
-
     # ID of the PaymentIntent that this ConfirmationToken was used to confirm, or null if this ConfirmationToken has not yet been used.
     sig { returns(T.nilable(String)) }
     attr_reader :payment_intent
-
     # Payment-method-specific configuration for this ConfirmationToken.
     sig { returns(T.nilable(PaymentMethodOptions)) }
     attr_reader :payment_method_options
-
     # Payment details collected by the Payment Element, used to create a PaymentMethod when a PaymentIntent or SetupIntent is confirmed with this ConfirmationToken.
     sig { returns(T.nilable(PaymentMethodPreview)) }
     attr_reader :payment_method_preview
-
     # Return URL used to confirm the Intent.
     sig { returns(T.nilable(String)) }
     attr_reader :return_url
-
     # Indicates that you intend to make future payments with this ConfirmationToken's payment method.
     #
     # The presence of this property will [attach the payment method](https://stripe.com/docs/payments/save-during-payment) to the PaymentIntent's Customer, if present, after the PaymentIntent is confirmed and any required actions from the user are complete.
     sig { returns(T.nilable(String)) }
     attr_reader :setup_future_usage
-
     # ID of the SetupIntent that this ConfirmationToken was used to confirm, or null if this ConfirmationToken has not yet been used.
     sig { returns(T.nilable(String)) }
     attr_reader :setup_intent
-
     # Shipping information collected on this ConfirmationToken.
     sig { returns(T.nilable(Shipping)) }
     attr_reader :shipping
-
     # Indicates whether the Stripe SDK is used to handle confirmation flow. Defaults to `true` on ConfirmationToken.
     sig { returns(T::Boolean) }
     attr_reader :use_stripe_sdk
-
     class RetrieveParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       sig { params(expand: T::Array[String]).void }
       def initialize(expand: nil); end
     end
@@ -1362,15 +1119,12 @@ module Stripe
           # Customer's bank account number.
           sig { returns(String) }
           attr_accessor :account_number
-
           # Institution number of the customer's bank.
           sig { returns(String) }
           attr_accessor :institution_number
-
           # Transit number of the customer's bank.
           sig { returns(String) }
           attr_accessor :transit_number
-
           sig {
             params(account_number: String, institution_number: String, transit_number: String).void
            }
@@ -1395,11 +1149,9 @@ module Stripe
           # The account number for the bank account.
           sig { returns(String) }
           attr_accessor :account_number
-
           # Bank-State-Branch number of the bank account.
           sig { returns(String) }
           attr_accessor :bsb_number
-
           sig { params(account_number: String, bsb_number: String).void }
           def initialize(account_number: nil, bsb_number: nil); end
         end
@@ -1407,11 +1159,9 @@ module Stripe
           # Account number of the bank account that the funds will be debited from.
           sig { returns(String) }
           attr_accessor :account_number
-
           # Sort code of the bank account. (e.g., `10-20-30`)
           sig { returns(String) }
           attr_accessor :sort_code
-
           sig { params(account_number: String, sort_code: String).void }
           def initialize(account_number: nil, sort_code: nil); end
         end
@@ -1423,27 +1173,21 @@ module Stripe
             # City, district, suburb, town, or village.
             sig { returns(String) }
             attr_accessor :city
-
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
             sig { returns(String) }
             attr_accessor :country
-
             # Address line 1 (e.g., street, PO Box, or company name).
             sig { returns(String) }
             attr_accessor :line1
-
             # Address line 2 (e.g., apartment, suite, unit, or building).
             sig { returns(String) }
             attr_accessor :line2
-
             # ZIP or postal code.
             sig { returns(String) }
             attr_accessor :postal_code
-
             # State, county, province, or region.
             sig { returns(String) }
             attr_accessor :state
-
             sig {
               params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
              }
@@ -1461,19 +1205,15 @@ module Stripe
             returns(T.nilable(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BillingDetails::Address))
            }
           attr_accessor :address
-
           # Email address.
           sig { returns(T.nilable(String)) }
           attr_accessor :email
-
           # Full name.
           sig { returns(T.nilable(String)) }
           attr_accessor :name
-
           # Billing phone number (including extension).
           sig { returns(T.nilable(String)) }
           attr_accessor :phone
-
           sig {
             params(address: T.nilable(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BillingDetails::Address), email: T.nilable(String), name: T.nilable(String), phone: T.nilable(String)).void
            }
@@ -1486,7 +1226,6 @@ module Stripe
           # The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
           sig { returns(String) }
           attr_accessor :tax_id
-
           sig { params(tax_id: String).void }
           def initialize(tax_id: nil); end
         end
@@ -1500,7 +1239,6 @@ module Stripe
           # The customer's bank.
           sig { returns(String) }
           attr_accessor :bank
-
           sig { params(bank: String).void }
           def initialize(bank: nil); end
         end
@@ -1508,11 +1246,9 @@ module Stripe
           # Account holder type for FPX transaction
           sig { returns(String) }
           attr_accessor :account_holder_type
-
           # The customer's bank.
           sig { returns(String) }
           attr_accessor :bank
-
           sig { params(account_holder_type: String, bank: String).void }
           def initialize(account_holder_type: nil, bank: nil); end
         end
@@ -1529,7 +1265,6 @@ module Stripe
           # Bank where the account is held.
           sig { returns(String) }
           attr_accessor :bank
-
           sig { params(bank: String).void }
           def initialize(bank: nil); end
         end
@@ -1537,7 +1272,6 @@ module Stripe
           # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
           sig { returns(String) }
           attr_accessor :bank
-
           sig { params(bank: String).void }
           def initialize(bank: nil); end
         end
@@ -1552,22 +1286,18 @@ module Stripe
             # The day of birth, between 1 and 31.
             sig { returns(Integer) }
             attr_accessor :day
-
             # The month of birth, between 1 and 12.
             sig { returns(Integer) }
             attr_accessor :month
-
             # The four-digit year of birth.
             sig { returns(Integer) }
             attr_accessor :year
-
             sig { params(day: Integer, month: Integer, year: Integer).void }
             def initialize(day: nil, month: nil, year: nil); end
           end
           # Customer's date of birth
           sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Klarna::Dob) }
           attr_accessor :dob
-
           sig {
             params(dob: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Klarna::Dob).void
            }
@@ -1595,7 +1325,6 @@ module Stripe
           # Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
           sig { returns(String) }
           attr_accessor :funding
-
           sig { params(funding: String).void }
           def initialize(funding: nil); end
         end
@@ -1606,9 +1335,11 @@ module Stripe
           # The customer's bank.
           sig { returns(String) }
           attr_accessor :bank
-
           sig { params(bank: String).void }
           def initialize(bank: nil); end
+        end
+        class PayByBank < Stripe::RequestParams
+
         end
         class Payco < Stripe::RequestParams
 
@@ -1623,15 +1354,12 @@ module Stripe
           # The account number for the bank account.
           sig { returns(String) }
           attr_accessor :account_number
-
           # Bank-State-Branch number of the bank account.
           sig { returns(String) }
           attr_accessor :bsb_number
-
           # The PayID alias for the bank account.
           sig { returns(String) }
           attr_accessor :pay_id
-
           sig { params(account_number: String, bsb_number: String, pay_id: String).void }
           def initialize(account_number: nil, bsb_number: nil, pay_id: nil); end
         end
@@ -1648,7 +1376,6 @@ module Stripe
           # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
           sig { returns(String) }
           attr_accessor :session
-
           sig { params(session: String).void }
           def initialize(session: nil); end
         end
@@ -1657,15 +1384,12 @@ module Stripe
             # The day of birth, between 1 and 31.
             sig { returns(Integer) }
             attr_accessor :day
-
             # The month of birth, between 1 and 12.
             sig { returns(Integer) }
             attr_accessor :month
-
             # The four-digit year of birth.
             sig { returns(Integer) }
             attr_accessor :year
-
             sig { params(day: Integer, month: Integer, year: Integer).void }
             def initialize(day: nil, month: nil, year: nil); end
           end
@@ -1674,7 +1398,6 @@ module Stripe
             returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Rechnung::Dob)
            }
           attr_accessor :dob
-
           sig {
             params(dob: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Rechnung::Dob).void
            }
@@ -1690,7 +1413,6 @@ module Stripe
           # IBAN of the bank account.
           sig { returns(String) }
           attr_accessor :iban
-
           sig { params(iban: String).void }
           def initialize(iban: nil); end
         end
@@ -1701,7 +1423,6 @@ module Stripe
           # Two-letter ISO code representing the country the bank account is located in.
           sig { returns(String) }
           attr_accessor :country
-
           sig { params(country: String).void }
           def initialize(country: nil); end
         end
@@ -1715,23 +1436,18 @@ module Stripe
           # Account holder type: individual or company.
           sig { returns(String) }
           attr_accessor :account_holder_type
-
           # Account number of the bank account.
           sig { returns(String) }
           attr_accessor :account_number
-
           # Account type: checkings or savings. Defaults to checking if omitted.
           sig { returns(String) }
           attr_accessor :account_type
-
           # The ID of a Financial Connections Account to use as a payment method.
           sig { returns(String) }
           attr_accessor :financial_connections_account
-
           # Routing number of the bank account.
           sig { returns(String) }
           attr_accessor :routing_number
-
           sig {
             params(account_holder_type: String, account_number: String, account_type: String, financial_connections_account: String, routing_number: String).void
            }
@@ -1752,235 +1468,183 @@ module Stripe
         # If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AcssDebit) }
         attr_accessor :acss_debit
-
         # If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Affirm) }
         attr_accessor :affirm
-
         # If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
         sig {
           returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AfterpayClearpay)
          }
         attr_accessor :afterpay_clearpay
-
         # If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alipay) }
         attr_accessor :alipay
-
         # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
         sig { returns(String) }
         attr_accessor :allow_redisplay
-
         # If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alma) }
         attr_accessor :alma
-
         # If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AmazonPay) }
         attr_accessor :amazon_pay
-
         # If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AuBecsDebit) }
         attr_accessor :au_becs_debit
-
         # If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BacsDebit) }
         attr_accessor :bacs_debit
-
         # If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Bancontact) }
         attr_accessor :bancontact
-
         # Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
         sig {
           returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BillingDetails)
          }
         attr_accessor :billing_details
-
         # If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Blik) }
         attr_accessor :blik
-
         # If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Boleto) }
         attr_accessor :boleto
-
         # If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Cashapp) }
         attr_accessor :cashapp
-
         # If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
         sig {
           returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::CustomerBalance)
          }
         attr_accessor :customer_balance
-
         # If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Eps) }
         attr_accessor :eps
-
         # If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Fpx) }
         attr_accessor :fpx
-
         # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Giropay) }
         attr_accessor :giropay
-
         # If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Gopay) }
         attr_accessor :gopay
-
         # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Grabpay) }
         attr_accessor :grabpay
-
         # If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
         sig {
           returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::IdBankTransfer)
          }
         attr_accessor :id_bank_transfer
-
         # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Ideal) }
         attr_accessor :ideal
-
         # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
         sig {
           returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::InteracPresent)
          }
         attr_accessor :interac_present
-
         # If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KakaoPay) }
         attr_accessor :kakao_pay
-
         # If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Klarna) }
         attr_accessor :klarna
-
         # If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Konbini) }
         attr_accessor :konbini
-
         # If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KrCard) }
         attr_accessor :kr_card
-
         # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Link) }
         attr_accessor :link
-
         # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::MbWay) }
         attr_accessor :mb_way
-
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         sig { returns(T::Hash[String, String]) }
         attr_accessor :metadata
-
         # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Mobilepay) }
         attr_accessor :mobilepay
-
         # If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Multibanco) }
         attr_accessor :multibanco
-
         # If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::NaverPay) }
         attr_accessor :naver_pay
-
         # If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Oxxo) }
         attr_accessor :oxxo
-
         # If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::P24) }
         attr_accessor :p24
-
+        # If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
+        sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::PayByBank) }
+        attr_accessor :pay_by_bank
         # If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payco) }
         attr_accessor :payco
-
         # If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paynow) }
         attr_accessor :paynow
-
         # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paypal) }
         attr_accessor :paypal
-
         # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payto) }
         attr_accessor :payto
-
         # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Pix) }
         attr_accessor :pix
-
         # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Promptpay) }
         attr_accessor :promptpay
-
         # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Qris) }
         attr_accessor :qris
-
         # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RadarOptions) }
         attr_accessor :radar_options
-
         # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Rechnung) }
         attr_accessor :rechnung
-
         # If this is a `Revolut Pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RevolutPay) }
         attr_accessor :revolut_pay
-
         # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SamsungPay) }
         attr_accessor :samsung_pay
-
         # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SepaDebit) }
         attr_accessor :sepa_debit
-
         # If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Shopeepay) }
         attr_accessor :shopeepay
-
         # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Sofort) }
         attr_accessor :sofort
-
         # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Swish) }
         attr_accessor :swish
-
         # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Twint) }
         attr_accessor :twint
-
         # The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
         sig { returns(String) }
         attr_accessor :type
-
         # If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::UsBankAccount) }
         attr_accessor :us_bank_account
-
         # If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::WechatPay) }
         attr_accessor :wechat_pay
-
         # If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
         sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Zip) }
         attr_accessor :zip
-
         sig {
-          params(acss_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AcssDebit, affirm: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Affirm, afterpay_clearpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AfterpayClearpay, alipay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alipay, allow_redisplay: String, alma: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alma, amazon_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AmazonPay, au_becs_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AuBecsDebit, bacs_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BacsDebit, bancontact: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Bancontact, billing_details: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BillingDetails, blik: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Blik, boleto: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Boleto, cashapp: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Cashapp, customer_balance: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::CustomerBalance, eps: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Eps, fpx: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Fpx, giropay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Giropay, gopay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Gopay, grabpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Grabpay, id_bank_transfer: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::IdBankTransfer, ideal: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Ideal, interac_present: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::InteracPresent, kakao_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KakaoPay, klarna: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Klarna, konbini: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Konbini, kr_card: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KrCard, link: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Link, mb_way: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::MbWay, metadata: T::Hash[String, String], mobilepay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Mobilepay, multibanco: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Multibanco, naver_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::NaverPay, oxxo: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Oxxo, p24: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::P24, payco: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payco, paynow: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paynow, paypal: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paypal, payto: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payto, pix: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Pix, promptpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Promptpay, qris: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Qris, radar_options: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RadarOptions, rechnung: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Rechnung, revolut_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RevolutPay, samsung_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SamsungPay, sepa_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SepaDebit, shopeepay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Shopeepay, sofort: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Sofort, swish: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Swish, twint: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Twint, type: String, us_bank_account: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::UsBankAccount, wechat_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::WechatPay, zip: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Zip).void
+          params(acss_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AcssDebit, affirm: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Affirm, afterpay_clearpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AfterpayClearpay, alipay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alipay, allow_redisplay: String, alma: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Alma, amazon_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AmazonPay, au_becs_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::AuBecsDebit, bacs_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BacsDebit, bancontact: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Bancontact, billing_details: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::BillingDetails, blik: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Blik, boleto: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Boleto, cashapp: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Cashapp, customer_balance: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::CustomerBalance, eps: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Eps, fpx: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Fpx, giropay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Giropay, gopay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Gopay, grabpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Grabpay, id_bank_transfer: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::IdBankTransfer, ideal: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Ideal, interac_present: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::InteracPresent, kakao_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KakaoPay, klarna: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Klarna, konbini: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Konbini, kr_card: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::KrCard, link: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Link, mb_way: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::MbWay, metadata: T::Hash[String, String], mobilepay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Mobilepay, multibanco: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Multibanco, naver_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::NaverPay, oxxo: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Oxxo, p24: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::P24, pay_by_bank: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::PayByBank, payco: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payco, paynow: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paynow, paypal: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Paypal, payto: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Payto, pix: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Pix, promptpay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Promptpay, qris: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Qris, radar_options: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RadarOptions, rechnung: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Rechnung, revolut_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::RevolutPay, samsung_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SamsungPay, sepa_debit: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::SepaDebit, shopeepay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Shopeepay, sofort: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Sofort, swish: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Swish, twint: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Twint, type: String, us_bank_account: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::UsBankAccount, wechat_pay: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::WechatPay, zip: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData::Zip).void
          }
         def initialize(
           acss_debit: nil,
@@ -2018,6 +1682,7 @@ module Stripe
           naver_pay: nil,
           oxxo: nil,
           p24: nil,
+          pay_by_bank: nil,
           payco: nil,
           paynow: nil,
           paypal: nil,
@@ -2045,27 +1710,21 @@ module Stripe
           # City, district, suburb, town, or village.
           sig { returns(String) }
           attr_accessor :city
-
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
           sig { returns(String) }
           attr_accessor :country
-
           # Address line 1 (e.g., street, PO Box, or company name).
           sig { returns(String) }
           attr_accessor :line1
-
           # Address line 2 (e.g., apartment, suite, unit, or building).
           sig { returns(String) }
           attr_accessor :line2
-
           # ZIP or postal code.
           sig { returns(String) }
           attr_accessor :postal_code
-
           # State, county, province, or region.
           sig { returns(String) }
           attr_accessor :state
-
           sig {
             params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
            }
@@ -2081,15 +1740,12 @@ module Stripe
         # Shipping address
         sig { returns(::Stripe::ConfirmationToken::CreateParams::Shipping::Address) }
         attr_accessor :address
-
         # Recipient name.
         sig { returns(String) }
         attr_accessor :name
-
         # Recipient phone (including extension)
         sig { returns(T.nilable(String)) }
         attr_accessor :phone
-
         sig {
           params(address: ::Stripe::ConfirmationToken::CreateParams::Shipping::Address, name: String, phone: T.nilable(String)).void
          }
@@ -2098,29 +1754,23 @@ module Stripe
       # Specifies which fields in the response should be expanded.
       sig { returns(T::Array[String]) }
       attr_accessor :expand
-
       # ID of an existing PaymentMethod.
       sig { returns(String) }
       attr_accessor :payment_method
-
       # If provided, this hash will be used to create a PaymentMethod.
       sig { returns(::Stripe::ConfirmationToken::CreateParams::PaymentMethodData) }
       attr_accessor :payment_method_data
-
       # Return URL used to confirm the Intent.
       sig { returns(String) }
       attr_accessor :return_url
-
       # Indicates that you intend to make future payments with this ConfirmationToken's payment method.
       #
       # The presence of this property will [attach the payment method](https://stripe.com/docs/payments/save-during-payment) to the PaymentIntent's Customer, if present, after the PaymentIntent is confirmed and any required actions from the user are complete.
       sig { returns(String) }
       attr_accessor :setup_future_usage
-
       # Shipping information for this ConfirmationToken.
       sig { returns(::Stripe::ConfirmationToken::CreateParams::Shipping) }
       attr_accessor :shipping
-
       sig {
         params(expand: T::Array[String], payment_method: String, payment_method_data: ::Stripe::ConfirmationToken::CreateParams::PaymentMethodData, return_url: String, setup_future_usage: String, shipping: ::Stripe::ConfirmationToken::CreateParams::Shipping).void
        }