squib 0.18.0 → 0.19.0a

data/lib/squib/builtin/sprues/drivethrucards_1up.yml

@@ -1,10 +1,10 @@
---- # Cards laid out for https://www.drivethrucards.com/
-# Make sure the cards being saved alternate back/front, back/front.
-# save_pdf sprue: 'drivethrucards_1up.yml', file: 'dtc_output.pdf'
-sheet_width: 2.75in
-sheet_height: 3.75in
-card_width: 2.75in
-card_height: 3.75in
-cards:
-- x: 0.0in
-  y: 0.0in
+--- # Cards laid out for https://www.drivethrucards.com/
+# Make sure the cards being saved alternate back/front, back/front.
+# save_pdf sprue: 'drivethrucards_1up.yml', file: 'dtc_output.pdf'
+sheet_width: 2.75in
+sheet_height: 3.75in
+card_width: 2.75in
+card_height: 3.75in
+cards:
+- x: 0.0in
+  y: 0.0in

data/lib/squib/builtin/sprues/letter_poker_card_9up.yml

@@ -1,25 +1,25 @@
----
-sheet_width: 8.5in
-sheet_height: 11in
-card_width: 2.5in
-card_height: 3.5in
-position_reference: :center
-cards:
-- x: 1.75in
-  y: 2.000in
-- x: 4.250in
-  y: 2.000in
-- x: 6.750in
-  y: 2.000in
-- x: 1.75in
-  y: 5.500in
-- x: 4.250in
-  y: 5.500in
-- x: 6.750in
-  y: 5.500in
-- x: 1.75in
-  y: 9.000in
-- x: 4.250in
-  y: 9.000in
-- x: 6.750in
-  y: 9.000in
+---
+sheet_width: 8.5in
+sheet_height: 11in
+card_width: 2.5in
+card_height: 3.5in
+position_reference: :center
+cards:
+- x: 1.75in
+  y: 2.000in
+- x: 4.250in
+  y: 2.000in
+- x: 6.750in
+  y: 2.000in
+- x: 1.75in
+  y: 5.500in
+- x: 4.250in
+  y: 5.500in
+- x: 6.750in
+  y: 5.500in
+- x: 1.75in
+  y: 9.000in
+- x: 4.250in
+  y: 9.000in
+- x: 6.750in
+  y: 9.000in

data/lib/squib/builtin/sprues/letter_poker_foldable_8up.yml

@@ -1,52 +1,52 @@
----
-sheet_width: 11in
-sheet_height: 8.5in
-card_width: 2.5in
-card_height: 3.5in
-cards:
-- x: 0.35in
-  y: 0.225in
-- x: 0.35in
-  y: 4.800in
-  rotate: :turnaround
-- x: 2.95in
-  y: 0.225in
-- x: 2.95in
-  y: 4.800in
-  rotate: :turnaround
-- x: 5.55in
-  y: 0.225in
-- x: 5.55in
-  y: 4.800in
-  rotate: :turnaround
-- x: 8.15in
-  y: 0.225in
-- x: 8.15in
-  y: 4.800in
-  rotate: :turnaround
-crop_line:
-  lines:
-  - type: :vertical
-    position: 0.35in
-  - type: :vertical
-    position: 2.85in
-  - type: :vertical
-    position: 2.95in
-  - type: :vertical
-    position: 5.45in
-  - type: :vertical
-    position: 5.55in
-  - type: :vertical
-    position: 8.05in
-  - type: :vertical
-    position: 8.15in
-  - type: :vertical
-    position: 10.65in
-  - type: :horizontal
-    position: 0.225in
-  - type: :horizontal
-    position: 3.725in
-  - type: :horizontal
-    position: 3.825in
-  - type: :horizontal
-    position: 7.325in
+---
+sheet_width: 11in
+sheet_height: 8.5in
+card_width: 2.5in
+card_height: 3.5in
+cards:
+- x: 0.35in
+  y: 0.225in
+- x: 0.35in
+  y: 4.800in
+  rotate: :turnaround
+- x: 2.95in
+  y: 0.225in
+- x: 2.95in
+  y: 4.800in
+  rotate: :turnaround
+- x: 5.55in
+  y: 0.225in
+- x: 5.55in
+  y: 4.800in
+  rotate: :turnaround
+- x: 8.15in
+  y: 0.225in
+- x: 8.15in
+  y: 4.800in
+  rotate: :turnaround
+crop_line:
+  lines:
+  - type: :vertical
+    position: 0.35in
+  - type: :vertical
+    position: 2.85in
+  - type: :vertical
+    position: 2.95in
+  - type: :vertical
+    position: 5.45in
+  - type: :vertical
+    position: 5.55in
+  - type: :vertical
+    position: 8.05in
+  - type: :vertical
+    position: 8.15in
+  - type: :vertical
+    position: 10.65in
+  - type: :horizontal
+    position: 0.225in
+  - type: :horizontal
+    position: 3.725in
+  - type: :horizontal
+    position: 3.825in
+  - type: :horizontal
+    position: 7.325in

data/lib/squib/builtin/sprues/printplaygames_18up.yml

@@ -1,68 +1,68 @@
-# Cards laid out for https://www.printplaygames.com/product/poker-cards
-# Make sure the range is alternating 18 fronts / 18 backs.
-# save_pdf sprue: 'printplaygames_18up.yml', file: 'pnp_output.pdf'
-sheet_width: 12.0in
-sheet_height: 18.0in
-card_width: 2.75in
-card_height: 3.75in
-position_reference: :center
-cards:
-  # Column 1
-- x: 2.3in
-  y: 2.165in
-  rotate: :counterclockwise
-- x: 2.3in
-  y: 4.915in
-  rotate: :counterclockwise
-- x: 2.3in
-  y: 7.665in
-  rotate: :counterclockwise
-- x: 2.3in
-  y: 10.415in
-  rotate: :counterclockwise
-- x: 2.3in
-  y: 13.165in
-  rotate: :counterclockwise
-- x: 2.3in
-  y: 15.915in
-  rotate: :counterclockwise
-
-  # Column 2
-- x: 6in
-  y: 2.165in
-  rotate: :counterclockwise
-- x: 6in
-  y: 4.915in
-  rotate: :counterclockwise
-- x: 6in
-  y: 7.665in
-  rotate: :counterclockwise
-- x: 6in
-  y: 10.415in
-  rotate: :counterclockwise
-- x: 6in
-  y: 13.165in
-  rotate: :counterclockwise
-- x: 6in
-  y: 15.915in
-  rotate: :counterclockwise
-
-  # Column 3
-- x: 9.7in
-  y: 2.165in
-  rotate: :counterclockwise
-- x: 9.7in
-  y: 4.915in
-  rotate: :counterclockwise
-- x: 9.7in
-  y: 7.665in
-  rotate: :counterclockwise
-- x: 9.7in
-  y: 10.415in
-  rotate: :counterclockwise
-- x: 9.7in
-  y: 13.165in
-  rotate: :counterclockwise
-- x: 9.7in
-  y: 15.915in
-  rotate: :counterclockwise
+# Cards laid out for https://www.printplaygames.com/product/poker-cards
+# Make sure the range is alternating 18 fronts / 18 backs.
+# save_pdf sprue: 'printplaygames_18up.yml', file: 'pnp_output.pdf'
+sheet_width: 12.0in
+sheet_height: 18.0in
+card_width: 2.75in
+card_height: 3.75in
+position_reference: :center
+cards:
+  # Column 1
+- x: 2.3in
+  y: 2.165in
+  rotate: :counterclockwise
+- x: 2.3in
+  y: 4.915in
+  rotate: :counterclockwise
+- x: 2.3in
+  y: 7.665in
+  rotate: :counterclockwise
+- x: 2.3in
+  y: 10.415in
+  rotate: :counterclockwise
+- x: 2.3in
+  y: 13.165in
+  rotate: :counterclockwise
+- x: 2.3in
+  y: 15.915in
+  rotate: :counterclockwise
+
+  # Column 2
+- x: 6in
+  y: 2.165in
+  rotate: :counterclockwise
+- x: 6in
+  y: 4.915in
+  rotate: :counterclockwise
+- x: 6in
+  y: 7.665in
+  rotate: :counterclockwise
+- x: 6in
+  y: 10.415in
+  rotate: :counterclockwise
+- x: 6in
+  y: 13.165in
+  rotate: :counterclockwise
+- x: 6in
+  y: 15.915in
+  rotate: :counterclockwise
+
+  # Column 3
+- x: 9.7in
+  y: 2.165in
+  rotate: :counterclockwise
+- x: 9.7in
+  y: 4.915in
+  rotate: :counterclockwise
+- x: 9.7in
+  y: 7.665in
+  rotate: :counterclockwise
+- x: 9.7in
+  y: 10.415in
+  rotate: :counterclockwise
+- x: 9.7in
+  y: 13.165in
+  rotate: :counterclockwise
+- x: 9.7in
+  y: 15.915in
+  rotate: :counterclockwise

data/lib/squib/card.rb

@@ -1,75 +1,75 @@
-require 'cairo'
-require_relative 'graphics/cairo_context_wrapper'
-
-module Squib
-  # Back end graphics. Private.
-  class Card
-
-    # :nodoc:
-    # @api private
-    attr_reader :width, :height, :backend, :svgfile, :index
-
-    # :nodoc:
-    # @api private
-    attr_accessor :cairo_surface, :cairo_context
-
-    # :nodoc:
-    # @api private
-    def initialize(deck, width, height, index=-1)
-      @deck          = deck
-      @width         = width
-      @height        = height
-      @backend       = deck.backend
-      @index         = index
-      @svgfile       = "#{deck.dir}/#{deck.prefix}#{deck.count_format % index}.svg"
-      @cairo_surface = make_surface(@svgfile, @backend)
-      @cairo_context = Squib::Graphics::CairoContextWrapper.new(Cairo::Context.new(@cairo_surface))
-      @cairo_context.antialias = deck.antialias
-    end
-
-    # :nodoc:
-    # @api private
-    def make_surface(svgfile, backend)
-      case backend.downcase.to_sym
-      when :memory
-        Cairo::ImageSurface.new(@width, @height)
-      when :svg
-        FileUtils.mkdir_p @deck.dir unless Dir.exists?(@deck.dir)
-        Cairo::SVGSurface.new(svgfile, @width, @height)
-      else
-        Squib.logger.fatal "Back end not recognized: '#{backend}'"
-        abort
-      end
-    end
-
-  # A save/restore wrapper for using Cairo
-  # :nodoc:
-  # @api private
-    def use_cairo(&block)
-      @cairo_context.save
-      @cairo_context.new_path # see bug 248
-      block.yield(@cairo_context)
-      @cairo_context.restore
-    end
-
-    def finish!
-      begin
-        @cairo_surface.finish
-      rescue Cairo::SurfaceFinishedError
-        # do nothin - if it's already finished that's fine
-      end
-    end
-
-    ########################
-    ### BACKEND GRAPHICS ###
-    ########################
-    require_relative 'graphics/background'
-    require_relative 'graphics/image'
-    require_relative 'graphics/save_doc'
-    require_relative 'graphics/save_images'
-    require_relative 'graphics/shapes'
-    require_relative 'graphics/showcase'
-    require_relative 'graphics/text'
-
-  end
-end
+require 'cairo'
+require_relative 'graphics/cairo_context_wrapper'
+
+module Squib
+  # Back end graphics. Private.
+  class Card
+
+    # :nodoc:
+    # @api private
+    attr_reader :width, :height, :backend, :svgfile, :index
+
+    # :nodoc:
+    # @api private
+    attr_accessor :cairo_surface, :cairo_context
+
+    # :nodoc:
+    # @api private
+    def initialize(deck, width, height, index=-1)
+      @deck          = deck
+      @width         = width
+      @height        = height
+      @backend       = deck.backend
+      @index         = index
+      @svgfile       = "#{deck.dir}/#{deck.prefix}#{deck.count_format % index}.svg"
+      @cairo_surface = make_surface(@svgfile, @backend)
+      @cairo_context = Squib::Graphics::CairoContextWrapper.new(Cairo::Context.new(@cairo_surface))
+      @cairo_context.antialias = deck.antialias
+    end
+
+    # :nodoc:
+    # @api private
+    def make_surface(svgfile, backend)
+      case backend.downcase.to_sym
+      when :memory
+        Cairo::ImageSurface.new(@width, @height)
+      when :svg
+        FileUtils.mkdir_p @deck.dir unless Dir.exist?(@deck.dir)
+        Cairo::SVGSurface.new(svgfile, @width, @height)
+      else
+        Squib.logger.fatal "Back end not recognized: '#{backend}'"
+        abort
+      end
+    end
+
+  # A save/restore wrapper for using Cairo
+  # :nodoc:
+  # @api private
+    def use_cairo(&block)
+      @cairo_context.save
+      @cairo_context.new_path # see bug 248
+      block.yield(@cairo_context)
+      @cairo_context.restore
+    end
+
+    def finish!
+      begin
+        @cairo_surface.finish unless @backend.to_sym == :svg
+      rescue Cairo::SurfaceFinishedError
+        # do nothin - if it's already finished that's fine
+      end
+    end
+
+    ########################
+    ### BACKEND GRAPHICS ###
+    ########################
+    require_relative 'graphics/background'
+    require_relative 'graphics/image'
+    require_relative 'graphics/save_doc'
+    require_relative 'graphics/save_images'
+    require_relative 'graphics/shapes'
+    require_relative 'graphics/showcase'
+    require_relative 'graphics/text'
+
+  end
+end

data/lib/squib/commands/cli.rb

@@ -1,39 +1,39 @@
-require 'mercenary'
-require_relative 'make_sprue'
-require_relative 'new'
-
-module Squib
-  class CLI
-
-    def run
-      Mercenary.program(:squib) do |p|
-        p.version Squib::VERSION
-        p.description 'A Ruby DSL for prototyping card games'
-        p.syntax 'squib <subcommand> [options]'
-
-        p.command(:new) do |c|
-          c.syntax 'new PATH'
-          c.description 'Creates a new basic Squib project scaffolding in PATH. Must be a new directory or already empty.'
-
-          c.option 'advanced', '--advanced', 'Create the advanced layout'
-
-          c.action do |args, options|
-            advanced = options.key? 'advanced'
-            Squib::Commands::New.new.process(args, advanced)
-          end
-        end
-
-        p.command(:make_sprue) do |c|
-          c.syntax 'make_sprue'
-          c.description 'Creates a sprue definition file.'
-
-          c.action do |args, options|
-            Squib::Commands::MakeSprue.new.process(args)
-          end
-        end
-
-      end
-    end
-
-  end
-end
+require 'mercenary'
+require_relative 'make_sprue'
+require_relative 'new'
+
+module Squib
+  class CLI
+
+    def run
+      Mercenary.program(:squib) do |p|
+        p.version Squib::VERSION
+        p.description 'A Ruby DSL for prototyping card games'
+        p.syntax 'squib <subcommand> [options]'
+
+        p.command(:new) do |c|
+          c.syntax 'new PATH'
+          c.description 'Creates a new basic Squib project scaffolding in PATH. Must be a new directory or already empty.'
+
+          c.option 'advanced', '--advanced', 'Create the advanced layout'
+
+          c.action do |args, options|
+            advanced = options.key? 'advanced'
+            Squib::Commands::New.new.process(args, advanced)
+          end
+        end
+
+        p.command(:make_sprue) do |c|
+          c.syntax 'make_sprue'
+          c.description 'Creates a sprue definition file.'
+
+          c.action do |args, options|
+            Squib::Commands::MakeSprue.new.process(args)
+          end
+        end
+
+      end
+    end
+
+  end
+end