sketchup-api-stubs 0.7.3 → 0.7.4

data/lib/sketchup-api-stubs/stubs/Sketchup/Http/Response.rb

@@ -1,62 +1,62 @@
-# Copyright:: Copyright 2020 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# Http::Response objects allows you to get the response information from the
-# server, you can only receive the Http::Response if you have attached a
-# callback block when calling start from the Http::Request object.
-#
-# @version SketchUp 2017
-class Sketchup::Http::Response
-
-  # Instance Methods
-
-  # Gets the http body that was received from the server as a string encoded
-  # using the charset provided in the Content-Type of the server response, if
-  # no charset is specified, ASCII-8BIT will be used.
-  #
-  # @example
-  #   request = Sketchup::Http::Request.new("http://localhost:8080")
-  #
-  #   request.start do |request, response|
-  #     puts "body: " + response.body
-  #   end
-  #
-  # @return [String]
-  #
-  # @version SketchUp 2017
-  def body
-  end
-
-  # Returns the http headers that were sent by the server.
-  #
-  # @example
-  #   request = Sketchup::Http::Request.new("http://localhost:8080")
-  #
-  #   request.start do |request, response|
-  #     response.headers.each do |key, value|
-  #       puts "#{key}: #{value}"
-  #     end
-  #   end
-  #
-  # @return [Hash]
-  #
-  # @version SketchUp 2017
-  def headers
-  end
-
-  # Returns the HTTP response status code as defined in rfc2616.
-  #
-  # @example
-  #   request = Sketchup::Http::Request.new("http://localhost:8080")
-  #
-  #   request.start do |request, response|
-  #     puts "http status code: #{response.status_code}"
-  #   end
-  #
-  # @return [int]
-  #
-  # @version SketchUp 2017
-  def status_code
-  end
-
-end
+# Copyright:: Copyright 2020 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# Http::Response objects allows you to get the response information from the
+# server, you can only receive the Http::Response if you have attached a
+# callback block when calling start from the Http::Request object.
+#
+# @version SketchUp 2017
+class Sketchup::Http::Response
+
+  # Instance Methods
+
+  # Gets the http body that was received from the server as a string encoded
+  # using the charset provided in the Content-Type of the server response, if
+  # no charset is specified, ASCII-8BIT will be used.
+  #
+  # @example
+  #   request = Sketchup::Http::Request.new("http://localhost:8080")
+  #
+  #   request.start do |request, response|
+  #     puts "body: " + response.body
+  #   end
+  #
+  # @return [String]
+  #
+  # @version SketchUp 2017
+  def body
+  end
+
+  # Returns the http headers that were sent by the server.
+  #
+  # @example
+  #   request = Sketchup::Http::Request.new("http://localhost:8080")
+  #
+  #   request.start do |request, response|
+  #     response.headers.each do |key, value|
+  #       puts "#{key}: #{value}"
+  #     end
+  #   end
+  #
+  # @return [Hash]
+  #
+  # @version SketchUp 2017
+  def headers
+  end
+
+  # Returns the HTTP response status code as defined in rfc2616.
+  #
+  # @example
+  #   request = Sketchup::Http::Request.new("http://localhost:8080")
+  #
+  #   request.start do |request, response|
+  #     puts "http status code: #{response.status_code}"
+  #   end
+  #
+  # @return [int]
+  #
+  # @version SketchUp 2017
+  def status_code
+  end
+
+end

data/lib/sketchup-api-stubs/stubs/Sketchup/Image.rb

@@ -1,409 +1,409 @@
-# Copyright:: Copyright 2020 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# An Image object represents a raster image placed in the Model.
-#
-# @version SketchUp 6.0
-class Sketchup::Image < Sketchup::Drawingelement
-
-  # Instance Methods
-
-  # The explode method is used to explode an image into a face with a texture
-  # on it.
-  #
-  # Note that current versions of SketchUp will return an empty array here.
-  # To work around this limitation you can iterate over your entities collection
-  # to determine which new entities were created.
-  #
-  # Versions prior to SketchUp 2015 returned an empty array due to a bug.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = "Plugins/su_dynamiccomponents/images"
-  #   image_file = Sketchup.find_support_file("report_tool.png", path)
-  #   image = model.active_entities.add_image(image_file, ORIGIN, 300)
-  #   entities = image.explode
-  #
-  # @return entitiesarray - an Array object of entities if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def explode
-  end
-
-  # The height method is used to retrieve the height of the image.
-  #
-  # The height is given in inches.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   height = image.height
-  #   if (height)
-  #     UI.messagebox height
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return height - the height of the model if successful
-  #
-  # @version SketchUp 6.0
-  def height
-  end
-
-  # The height= method is used to set the height of the image.
-  #
-  # The height is set in inches.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   UI.messagebox "Before adjustment"
-  #   height = image.height = 400
-  #   if (height)
-  #     UI.messagebox height
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param height
-  #   The height, in inches, to set the image.
-  #
-  # @return height - the new height if successful
-  #
-  # @version SketchUp 6.0
-  def height=(height)
-  end
-
-  # The {#image_rep} method returns a copy of a {Sketchup::ImageRep} object
-  # representing the pixel data.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = "Plugins/su_dynamiccomponents/images"
-  #   image_file = Sketchup.find_support_file("report_tool.png", path)
-  #   image = model.active_entities.add_image(image_file, ORIGIN, 300)
-  #   image_rep = image.image_rep
-  #
-  # @return [Sketchup::ImageRep]
-  #
-  # @version SketchUp 2018
-  def image_rep
-  end
-
-  # The normal method is used to retrieve the 3D Vector that is perpendicular to
-  # the plane of the image.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   vector = image.normal
-  #   if (vector)
-  #     UI.messagebox vector
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def normal
-  end
-
-  # The origin method is used to retrieve the 3D point that defines the origin
-  # of the image.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   origin = image.origin
-  #   if (origin)
-  #     UI.messagebox origin
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return point - a Point3d object containing the origin location
-  #   if successful
-  #
-  # @version SketchUp 6.0
-  def origin
-  end
-
-  # The origin= method is used to set the 3D point as the origin of the image.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   pt2 = Geom::Point3d.new 100,100,100
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   UI.messagebox "Before Move"
-  #   origin = image.origin=pt2
-  #   if (origin)
-  #     UI.messagebox origin
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param point
-  #   A Point3d object with the new origin.
-  #
-  # @return point - the Point3d object representing the newly
-  #   established origin if successful
-  #
-  # @version SketchUp 6.0
-  def origin=(point)
-  end
-
-  # The path method is used to retrieve the path of the file defining the image.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   path = image.path
-  #   if (path)
-  #     UI.messagebox path
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return path - the path for the image file if successful
-  #
-  # @version SketchUp 6.0
-  def path
-  end
-
-  # The pixelheight method is used to retrieve the height of the image file in
-  # pixels.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   pixelheight = image.pixelheight
-  #   if (pixelheight)
-  #     UI.messagebox pixelheight
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return height - the height of the image in pixels if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def pixelheight
-  end
-
-  # The pixelwidth method is used to retrieve the width of the image file in
-  # pixels.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   pixelwidth = image.pixelwidth
-  #   if (pixelwidth)
-  #     UI.messagebox pixelwidth
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return width - the width of the image in pixels if successful
-  #
-  # @version SketchUp 6.0
-  def pixelwidth
-  end
-
-  # The size= method is used to set the width and height of the image, in inches.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   UI.messagebox "Before Resize"
-  #   size = image.size= 500,500
-  #   if (size)
-  #     UI.messagebox size
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param width
-  #   The width of the image.
-  #
-  # @param height
-  #   The height of the image.
-  #
-  # @return size - the new width and height of the image if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def size=(width, height)
-  end
-
-  # The transform! method is used to apply a transformation to the image.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   point = Geom::Point3d.new 100,100,100
-  #   t = Geom::Transformation.new point
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   UI.messagebox "Before Move"
-  #   image = image.transform! t
-  #   if (image)
-  #     UI.messagebox image
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param transform
-  #   A Transformation object.
-  #
-  # @return image - the transformed Image object if successful
-  #
-  # @version SketchUp 6.0
-  def transform!(transform)
-  end
-
-  # The transformation method is used to retrieve the transformation for the
-  # image.
-  #
-  # @example
-  #   # Add an image to the model.
-  #   model = Sketchup.active_model
-  #   entities = model.active_entities
-  #   path = Sketchup.find_support_file('report_tool.png', 'Plugins/su_dynamiccomponents/images')
-  #   point = Geom::Point3d.new(100,100,100)
-  #   image = entities.add_image(path, point, 300)
-  #
-  #   trans = image.transformation
-  #
-  # @return transformation - a Transformation object if successful
-  #
-  # @version SketchUp 2014
-  def transformation
-  end
-
-  # The transformation= method is used to set the transformation for the
-  # image.
-  #
-  # @example
-  #   # Add an image to the model.
-  #   model = Sketchup.active_model
-  #   entities = model.active_entities
-  #   path = Sketchup.find_support_file('report_tool.png', 'Plugins/su_dynamiccomponents/images')
-  #   point = Geom::Point3d.new(100,100,100)
-  #   image = entities.add_image(path, point, 300)
-  #
-  #   new_transform = Geom::Transformation.new([100,0,0])
-  #   image.transformation = new_transform
-  #
-  # @param transform
-  #   The Transformation object to apply
-  #
-  # @return image - the newly transformed image
-  #
-  # @version SketchUp 2014
-  def transformation=(transform)
-  end
-
-  # The width method is used to retrieve the width of the image.
-  #
-  # The width is given in inches.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png",
-  #     "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   width = image.width
-  #   if (width)
-  #     UI.messagebox width
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return width - the width of the image if successful
-  #
-  # @version SketchUp 6.0
-  def width
-  end
-
-  # The width= method is used to set the width of the image.
-  #
-  # The width is set in inches.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   UI.messagebox "Before adjustment"
-  #   width = image.width=400
-  #   if (width)
-  #     UI.messagebox width
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param width
-  #   The width, in inches, to set the image.
-  #
-  # @return width - the new width if successful
-  #
-  # @version SketchUp 6.0
-  def width=(width)
-  end
-
-  # The zrotation method is used to get the angle that the image is rotated
-  # about the normal vector from an arbitrary X axis.
-  #
-  # @example
-  #   model = Sketchup.active_model
-  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
-  #   pt = Geom::Point3d.new
-  #   entities = model.active_entities
-  #   image = entities.add_image path, pt, 300
-  #   zrotation = image.zrotation
-  #   if (zrotation)
-  #     UI.messagebox zrotation
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def zrotation
-  end
-
-end
+# Copyright:: Copyright 2020 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# An Image object represents a raster image placed in the Model.
+#
+# @version SketchUp 6.0
+class Sketchup::Image < Sketchup::Drawingelement
+
+  # Instance Methods
+
+  # The explode method is used to explode an image into a face with a texture
+  # on it.
+  #
+  # Note that current versions of SketchUp will return an empty array here.
+  # To work around this limitation you can iterate over your entities collection
+  # to determine which new entities were created.
+  #
+  # Versions prior to SketchUp 2015 returned an empty array due to a bug.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = "Plugins/su_dynamiccomponents/images"
+  #   image_file = Sketchup.find_support_file("report_tool.png", path)
+  #   image = model.active_entities.add_image(image_file, ORIGIN, 300)
+  #   entities = image.explode
+  #
+  # @return entitiesarray - an Array object of entities if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def explode
+  end
+
+  # The height method is used to retrieve the height of the image.
+  #
+  # The height is given in inches.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   height = image.height
+  #   if (height)
+  #     UI.messagebox height
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return height - the height of the model if successful
+  #
+  # @version SketchUp 6.0
+  def height
+  end
+
+  # The height= method is used to set the height of the image.
+  #
+  # The height is set in inches.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   UI.messagebox "Before adjustment"
+  #   height = image.height = 400
+  #   if (height)
+  #     UI.messagebox height
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param height
+  #   The height, in inches, to set the image.
+  #
+  # @return height - the new height if successful
+  #
+  # @version SketchUp 6.0
+  def height=(height)
+  end
+
+  # The {#image_rep} method returns a copy of a {Sketchup::ImageRep} object
+  # representing the pixel data.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = "Plugins/su_dynamiccomponents/images"
+  #   image_file = Sketchup.find_support_file("report_tool.png", path)
+  #   image = model.active_entities.add_image(image_file, ORIGIN, 300)
+  #   image_rep = image.image_rep
+  #
+  # @return [Sketchup::ImageRep]
+  #
+  # @version SketchUp 2018
+  def image_rep
+  end
+
+  # The normal method is used to retrieve the 3D Vector that is perpendicular to
+  # the plane of the image.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   vector = image.normal
+  #   if (vector)
+  #     UI.messagebox vector
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def normal
+  end
+
+  # The origin method is used to retrieve the 3D point that defines the origin
+  # of the image.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   origin = image.origin
+  #   if (origin)
+  #     UI.messagebox origin
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return point - a Point3d object containing the origin location
+  #   if successful
+  #
+  # @version SketchUp 6.0
+  def origin
+  end
+
+  # The origin= method is used to set the 3D point as the origin of the image.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   pt2 = Geom::Point3d.new 100,100,100
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   UI.messagebox "Before Move"
+  #   origin = image.origin=pt2
+  #   if (origin)
+  #     UI.messagebox origin
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param point
+  #   A Point3d object with the new origin.
+  #
+  # @return point - the Point3d object representing the newly
+  #   established origin if successful
+  #
+  # @version SketchUp 6.0
+  def origin=(point)
+  end
+
+  # The path method is used to retrieve the path of the file defining the image.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   path = image.path
+  #   if (path)
+  #     UI.messagebox path
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return path - the path for the image file if successful
+  #
+  # @version SketchUp 6.0
+  def path
+  end
+
+  # The pixelheight method is used to retrieve the height of the image file in
+  # pixels.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   pixelheight = image.pixelheight
+  #   if (pixelheight)
+  #     UI.messagebox pixelheight
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return height - the height of the image in pixels if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def pixelheight
+  end
+
+  # The pixelwidth method is used to retrieve the width of the image file in
+  # pixels.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   pixelwidth = image.pixelwidth
+  #   if (pixelwidth)
+  #     UI.messagebox pixelwidth
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return width - the width of the image in pixels if successful
+  #
+  # @version SketchUp 6.0
+  def pixelwidth
+  end
+
+  # The size= method is used to set the width and height of the image, in inches.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   UI.messagebox "Before Resize"
+  #   size = image.size= 500,500
+  #   if (size)
+  #     UI.messagebox size
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param width
+  #   The width of the image.
+  #
+  # @param height
+  #   The height of the image.
+  #
+  # @return size - the new width and height of the image if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def size=(width, height)
+  end
+
+  # The transform! method is used to apply a transformation to the image.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   point = Geom::Point3d.new 100,100,100
+  #   t = Geom::Transformation.new point
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   UI.messagebox "Before Move"
+  #   image = image.transform! t
+  #   if (image)
+  #     UI.messagebox image
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param transform
+  #   A Transformation object.
+  #
+  # @return image - the transformed Image object if successful
+  #
+  # @version SketchUp 6.0
+  def transform!(transform)
+  end
+
+  # The transformation method is used to retrieve the transformation for the
+  # image.
+  #
+  # @example
+  #   # Add an image to the model.
+  #   model = Sketchup.active_model
+  #   entities = model.active_entities
+  #   path = Sketchup.find_support_file('report_tool.png', 'Plugins/su_dynamiccomponents/images')
+  #   point = Geom::Point3d.new(100,100,100)
+  #   image = entities.add_image(path, point, 300)
+  #
+  #   trans = image.transformation
+  #
+  # @return transformation - a Transformation object if successful
+  #
+  # @version SketchUp 2014
+  def transformation
+  end
+
+  # The transformation= method is used to set the transformation for the
+  # image.
+  #
+  # @example
+  #   # Add an image to the model.
+  #   model = Sketchup.active_model
+  #   entities = model.active_entities
+  #   path = Sketchup.find_support_file('report_tool.png', 'Plugins/su_dynamiccomponents/images')
+  #   point = Geom::Point3d.new(100,100,100)
+  #   image = entities.add_image(path, point, 300)
+  #
+  #   new_transform = Geom::Transformation.new([100,0,0])
+  #   image.transformation = new_transform
+  #
+  # @param transform
+  #   The Transformation object to apply
+  #
+  # @return image - the newly transformed image
+  #
+  # @version SketchUp 2014
+  def transformation=(transform)
+  end
+
+  # The width method is used to retrieve the width of the image.
+  #
+  # The width is given in inches.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png",
+  #     "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   width = image.width
+  #   if (width)
+  #     UI.messagebox width
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return width - the width of the image if successful
+  #
+  # @version SketchUp 6.0
+  def width
+  end
+
+  # The width= method is used to set the width of the image.
+  #
+  # The width is set in inches.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   UI.messagebox "Before adjustment"
+  #   width = image.width=400
+  #   if (width)
+  #     UI.messagebox width
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param width
+  #   The width, in inches, to set the image.
+  #
+  # @return width - the new width if successful
+  #
+  # @version SketchUp 6.0
+  def width=(width)
+  end
+
+  # The zrotation method is used to get the angle that the image is rotated
+  # about the normal vector from an arbitrary X axis.
+  #
+  # @example
+  #   model = Sketchup.active_model
+  #   path = Sketchup.find_support_file "report_tool.png", "Tools/DynamicComponents/images"
+  #   pt = Geom::Point3d.new
+  #   entities = model.active_entities
+  #   image = entities.add_image path, pt, 300
+  #   zrotation = image.zrotation
+  #   if (zrotation)
+  #     UI.messagebox zrotation
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def zrotation
+  end
+
+end