sketchup-api-stubs 0.7.3 → 0.7.4

data/lib/sketchup-api-stubs/stubs/Sketchup/Camera.rb

@@ -1,577 +1,577 @@
-# Copyright:: Copyright 2020 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# The Camera class contains methods for creating and manipulating a camera.
-# The camera in SketchUp is the "point of view" from which you look at the
-# model.
-#
-# @example
-#   # Create a camera from scratch with an "eye" position in
-#   # x, y, z coordinates, a "target" position that
-#   # defines what to look at, and an "up" vector.
-#   eye = [1000,1000,1000]
-#   target = [0,0,0]
-#   up = [0,0,1]
-#   my_camera = Sketchup::Camera.new eye, target, up
-#
-#   # Get a handle to the current view and change its camera.
-#   view = Sketchup.active_model.active_view
-#   view.camera = my_camera
-#
-# @version SketchUp 6.0
-class Sketchup::Camera
-
-  # Instance Methods
-
-  # The aspect_ratio method is used to retrieve the aspect ratio of the Camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   ar = camera.aspect_ratio
-  #   if (ar)
-  #     UI.messagebox ar.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return aspectratio - an aspect ratio, such as 1.85, if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def aspect_ratio
-  end
-
-  # The aspect_ratio= method is used to set the aspect ratio for a Camera.
-  # Changing this value will cause SketchUp to show gray bars over the screen
-  # to show the resulting view.
-  #
-  # If you set the value to 0.0, then the aspect ratio of the Camera will match
-  # the aspect ratio of its View.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   ar = camera.aspect_ratio = 1.85
-  #   if (ar)
-  #     UI.messagebox ar.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param [Float] ratio
-  #
-  # @return aspectratio - an aspect ratio, such as 1.85, if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def aspect_ratio=(ratio)
-  end
-
-  # The center_2d method returns a point with the x and y offset of the camera
-  # when it's in 2d mode. When the camera is in two-point perspective and the
-  # user pans around, the x and y values will change. These values are in
-  # normalized device coordinates, so for instance, the range [-1.0, 1.0] spans
-  # the full width or height of the screen.
-  #
-  # The z value is unused and it is always zero.
-  #
-  # @example
-  #   Sketchup.active_model.active_view.camera.center_2d
-  #
-  # @return Point3d
-  #
-  # @version SketchUp 2015
-  def center_2d
-  end
-
-  # The description method is used to retrieve the description for a Camera
-  # object.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   description = camera.description
-  #   if (description)
-  #     UI.messagebox description
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return description - a string description for the camera if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def description
-  end
-
-  # The description= method is used to set the description for the Camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   description = camera.description = "35 mm Camera"
-  #
-  # @param [String] description
-  #
-  # @return description - a string description for the camera if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def description=(description)
-  end
-
-  # The direction method is used to retrieve a Vector3d object in the direction
-  # that the Camera is pointing.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # Returns 0,0,-1 which indicates it is pointed down the Z axis
-  #   direction = camera.direction
-  #   if (direction)
-  #     UI.messagebox direction.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return direction - a Vector3d object pointing in the direction
-  #   that the Camera is pointing if successful
-  #
-  # @version SketchUp 6.0
-  def direction
-  end
-
-  # The eye method is used to retrieve the eye Point3d object for the Camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # Returns 0,0,1 which indicates it is right in line with the Z axis.
-  #   eye = camera.eye
-  #   if (eye)
-  #     UI.messagebox eye
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return eye - a Point3d object if successful
-  #
-  # @version SketchUp 6.0
-  def eye
-  end
-
-  # The focal_length method is used to get the focal length in millimeters of
-  # perspective Camera.
-  #
-  # This value is computed based on the field of view (see the fov method) and
-  # the image width (see image_width).
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   l = camera.focal_length
-  #   if (l)
-  #     UI.messagebox l.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param length
-  #   The focal length for the camera if successful.
-  #
-  # @return nil
-  #
-  # @version SketchUp 6.0
-  def focal_length(length)
-  end
-
-  # The focal_length= method allows you to sent the focal length (in
-  # millimeters) of a perspective camera. It must be between 1 and 3000,
-  # inclusive. This is an alternate way of setting the field of view.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   l = camera.focal_length=120
-  #   if (l)
-  #     UI.messagebox l
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param [Float] value
-  #
-  # @return length - the new focal length for the camera if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def focal_length=(value)
-  end
-
-  # The fov method retrieves the field of view of the camera (in degrees).
-  #
-  # This is only applicable to perspective cameras.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   fov = camera.fov
-  #   if (fov)
-  #     UI.messagebox fov.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return fov - field of view, in degrees, if successful
-  #
-  # @version SketchUp 6.0
-  def fov
-  end
-
-  # The fov= method sets the field of view, in millimeters, for a Camera. It
-  # must be between 1 and 120, inclusive.
-  #
-  # This is only valid on a perspective camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   fov = camera.fov = 56.78
-  #   if (fov)
-  #     UI.messagebox fov.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param fov
-  #   A field of view in millimeters.
-  #
-  # @return fov - the new field of view if successful
-  #
-  # @version SketchUp 6.0
-  def fov=(fov)
-  end
-
-  # The fov_is_height? method indicates whether the field of view is horizontal
-  # or vertical.
-  #
-  # @example
-  #   camera = Sketchup.active_model.active_view.camera
-  #   if camera.fov_is_height?
-  #     fov_vertical = camera.fov
-  #     # Compute the horizontal FOV.
-  #   else
-  #     fov_horizontal = camera.fov
-  #     # Compute the vertical FOV.
-  #   end
-  #
-  # @return [Boolean] bool - true if vertical, false otherwise
-  #
-  # @version SketchUp 2015
-  def fov_is_height?
-  end
-
-  # The height method retrieves the height of a Camera in inches.
-  #
-  # This is only valid if it is not a perspective camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   camera.perspective = false
-  #   h = camera.height
-  #   if (h)
-  #     UI.messagebox h.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return height - height in current units if successful
-  #
-  # @version SketchUp 6.0
-  def height
-  end
-
-  # The height= method is used to set the height for the Camera in inches.
-  #
-  # This is only valid if it is not a perspective camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   camera.perspective = false
-  #   h = camera.height = 20
-  #   if (h)
-  #     UI.messagebox h.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param [Float] value
-  #
-  # @return height - height in current units if successful
-  #
-  # @version SketchUp 6.0
-  def height=(value)
-  end
-
-  # The image_width method retrieves the size of the image on the image plane of
-  # the Camera.
-  #
-  # By default, this value is not set. If it is set, it is used in the
-  # calculation of the focal length from the field of view. Unlike most length
-  # values in SketchUp, the image_width and focal_length values are specified in
-  # millimeters rather than in inches.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   w = camera.image_width
-  #   if (w)
-  #     UI.messagebox w.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return width - the width of the camera if successful
-  #
-  # @version SketchUp 6.0
-  def image_width
-  end
-
-  # The image_width= method is used to set the size of the image on the "film"
-  # for a perspective camera.
-  #
-  # The value is given in millimeters. It is used in the conversions between
-  # field of view and focal length.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   w = camera.image_width=1.0
-  #   if (w)
-  #     UI.messagebox w.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @param [Float] value
-  #
-  # @return width - the width of the camera if successful
-  #
-  # @version SketchUp 6.0
-  def image_width=(value)
-  end
-
-  # Returns a new camera with eye (where the camera is) and targets (where the
-  # camera is looking).
-  #
-  # @example
-  #   eye = Geom::Point3d.new(20, 5, 30)
-  #   target = Geom::Point3d.new(20, 60, 25)
-  #   up = Z_AXIS
-  #   camera = Sketchup::Camera.new(eye, target, up)
-  #
-  # @example Default paramaters
-  #   camera = Sketchup::Camera.new
-  #
-  # @overload initialize
-  #
-  #   @return [Sketchup::Camera]
-  #
-  # @overload initialize(eye, target, up, perspective = true, fov = 30.0)
-  #
-  #   @param [Geom::Point3d] eye  See {#eye}.
-  #   @param [Geom::Point3d] target  See {#target}.
-  #   @param [Geom::Point3d] up  See {#up}.
-  #   @param [Boolean] perspective  see {#perspective?}.
-  #   @param [Float] fov  see {#fov}.
-  #   @return [Sketchup::Camera]
-  #
-  # @version SketchUp 6.0
-  def initialize(*args)
-  end
-
-  # The is_2d? method indicates if the camera is in 2d mode. 2 point
-  # perspective mode and PhotoMatch mode are 2d cameras.
-  #
-  # @example
-  #   Sketchup.active_model.active_view.camera.is_2d?
-  #
-  # @return [Boolean] Boolean - true if camera is in 2d mode, false otherwise
-  #
-  # @version SketchUp 2015
-  def is_2d?
-  end
-
-  # The perspective= method is used to set whether or not this is a perspective
-  # camera or an orthographic camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   status = camera.perspective = false
-  #   if (status)
-  #     UI.messagebox "Perspective"
-  #   else
-  #     UI.messagebox "Orthographic"
-  #   end
-  #
-  # @param perspective
-  #   true for perspective, false for orthographic
-  #
-  # @return status - true if perspective, false if orthographic
-  #
-  # @version SketchUp 6.0
-  def perspective=(perspective)
-  end
-
-  # The perspective? method is used to determine whether a camera is a
-  # perspective or orthographic camera.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   status = camera.perspective?
-  #   if (status)
-  #     UI.messagebox "Perspective"
-  #   else
-  #     UI.messagebox "Orthographic"
-  #   end
-  #
-  # @return [Boolean] status - true if perspective, false if orthographic
-  #
-  # @version SketchUp 6.0
-  def perspective?
-  end
-
-  # The scale_2d method returns a float indicating the scaling factor of 2d
-  # cameras.
-  #
-  # When the camera is in two-point perspective and the user uses the zoom tools,
-  # this value will change. Zooming out will produce a value greater than 1.0.
-  #
-  # @example
-  #   Sketchup.active_model.active_view.camera.scale_2d
-  #
-  # @return float
-  #
-  # @version SketchUp 2015
-  def scale_2d
-  end
-
-  # The {#set} method sets the camera orientation. You have to set the camera eye,
-  # target and up parameters at the same time to make sure that you have a valid
-  # camera definition.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   eye = Geom::Point3d.new(20, 5, 30)
-  #   target = Geom::Point3d.new(20, 60, 25)
-  #   up = Z_AXIS
-  #   camera.set(eye, target, up)
-  #
-  # @param [Geom::Point3d] eye
-  #   See {#eye}.
-  #
-  # @param [Geom::Point3d] target
-  #   See {#target}.
-  #
-  # @param [Geom::Point3d] up
-  #   See {#up}.
-  #
-  # @return [Sketchup::Camera]
-  #
-  # @version SketchUp 6.0
-  def set(eye, target, up)
-  end
-
-  # The target method retrieves Point3d that the camera is pointing at.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # Target point is 0,0,0
-  #   t = camera.target
-  #   if (t)
-  #     UI.messagebox t.to_s
-  #   else
-  #     UI.messagebox "Failure".
-  #   end
-  #
-  # @return target - a Point3d object if successful
-  #
-  # @version SketchUp 6.0
-  def target
-  end
-
-  # The up method is used to retrieve the up vector for the camera. This is the
-  # direction that the top of the camera is facing.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # 0.0, 1.0, 0.0
-  #   up = camera.up
-  #   if (up)
-  #     UI.messagebox up.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return up - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def up
-  end
-
-  # The xaxis method is used to retrieve the x axis of the camera coordinate
-  # system defined by the camera's direction and up vector.
-  #
-  # This value is computed from the cross product between the camera direction
-  # and the up vector.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # 1.0, 0.0, 0.0
-  #   v = camera.xaxis
-  #   if (v)
-  #     UI.messagebox v.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def xaxis
-  end
-
-  # The yaxis method retrieves the y axis of the camera coordinate system
-  # defined by the camera's direction and up vector.
-  #
-  # This value is computed to be perpendicular the camera x and z axes. It is
-  # equivalent to the up direction, but is computed to make sure that it is
-  # perpendicular to the direction.
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # 0.0, 1.0, 0.0
-  #   v = camera.yaxis
-  #   if (v)
-  #     UI.messagebox v.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def yaxis
-  end
-
-  # The zaxis method retrieves the z axis of the camera coordinate system
-  # defined by the camera's direction and up vector.
-  #
-  # This value is computed. It is the same as Camera.direction
-  #
-  # @example
-  #   camera = Sketchup::Camera.new
-  #   # 0.0, 1.0, 0.0
-  #   v = camera.zaxis
-  #   if (v)
-  #     UI.messagebox v.to_s
-  #   else
-  #     UI.messagebox "Failure"
-  #   end
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def zaxis
-  end
-
-end
+# Copyright:: Copyright 2020 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# The Camera class contains methods for creating and manipulating a camera.
+# The camera in SketchUp is the "point of view" from which you look at the
+# model.
+#
+# @example
+#   # Create a camera from scratch with an "eye" position in
+#   # x, y, z coordinates, a "target" position that
+#   # defines what to look at, and an "up" vector.
+#   eye = [1000,1000,1000]
+#   target = [0,0,0]
+#   up = [0,0,1]
+#   my_camera = Sketchup::Camera.new eye, target, up
+#
+#   # Get a handle to the current view and change its camera.
+#   view = Sketchup.active_model.active_view
+#   view.camera = my_camera
+#
+# @version SketchUp 6.0
+class Sketchup::Camera
+
+  # Instance Methods
+
+  # The aspect_ratio method is used to retrieve the aspect ratio of the Camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   ar = camera.aspect_ratio
+  #   if (ar)
+  #     UI.messagebox ar.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return aspectratio - an aspect ratio, such as 1.85, if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def aspect_ratio
+  end
+
+  # The aspect_ratio= method is used to set the aspect ratio for a Camera.
+  # Changing this value will cause SketchUp to show gray bars over the screen
+  # to show the resulting view.
+  #
+  # If you set the value to 0.0, then the aspect ratio of the Camera will match
+  # the aspect ratio of its View.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   ar = camera.aspect_ratio = 1.85
+  #   if (ar)
+  #     UI.messagebox ar.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param [Float] ratio
+  #
+  # @return aspectratio - an aspect ratio, such as 1.85, if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def aspect_ratio=(ratio)
+  end
+
+  # The center_2d method returns a point with the x and y offset of the camera
+  # when it's in 2d mode. When the camera is in two-point perspective and the
+  # user pans around, the x and y values will change. These values are in
+  # normalized device coordinates, so for instance, the range [-1.0, 1.0] spans
+  # the full width or height of the screen.
+  #
+  # The z value is unused and it is always zero.
+  #
+  # @example
+  #   Sketchup.active_model.active_view.camera.center_2d
+  #
+  # @return Point3d
+  #
+  # @version SketchUp 2015
+  def center_2d
+  end
+
+  # The description method is used to retrieve the description for a Camera
+  # object.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   description = camera.description
+  #   if (description)
+  #     UI.messagebox description
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return description - a string description for the camera if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def description
+  end
+
+  # The description= method is used to set the description for the Camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   description = camera.description = "35 mm Camera"
+  #
+  # @param [String] description
+  #
+  # @return description - a string description for the camera if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def description=(description)
+  end
+
+  # The direction method is used to retrieve a Vector3d object in the direction
+  # that the Camera is pointing.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # Returns 0,0,-1 which indicates it is pointed down the Z axis
+  #   direction = camera.direction
+  #   if (direction)
+  #     UI.messagebox direction.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return direction - a Vector3d object pointing in the direction
+  #   that the Camera is pointing if successful
+  #
+  # @version SketchUp 6.0
+  def direction
+  end
+
+  # The eye method is used to retrieve the eye Point3d object for the Camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # Returns 0,0,1 which indicates it is right in line with the Z axis.
+  #   eye = camera.eye
+  #   if (eye)
+  #     UI.messagebox eye
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return eye - a Point3d object if successful
+  #
+  # @version SketchUp 6.0
+  def eye
+  end
+
+  # The focal_length method is used to get the focal length in millimeters of
+  # perspective Camera.
+  #
+  # This value is computed based on the field of view (see the fov method) and
+  # the image width (see image_width).
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   l = camera.focal_length
+  #   if (l)
+  #     UI.messagebox l.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param length
+  #   The focal length for the camera if successful.
+  #
+  # @return nil
+  #
+  # @version SketchUp 6.0
+  def focal_length(length)
+  end
+
+  # The focal_length= method allows you to sent the focal length (in
+  # millimeters) of a perspective camera. It must be between 1 and 3000,
+  # inclusive. This is an alternate way of setting the field of view.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   l = camera.focal_length=120
+  #   if (l)
+  #     UI.messagebox l
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param [Float] value
+  #
+  # @return length - the new focal length for the camera if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def focal_length=(value)
+  end
+
+  # The fov method retrieves the field of view of the camera (in degrees).
+  #
+  # This is only applicable to perspective cameras.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   fov = camera.fov
+  #   if (fov)
+  #     UI.messagebox fov.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return fov - field of view, in degrees, if successful
+  #
+  # @version SketchUp 6.0
+  def fov
+  end
+
+  # The fov= method sets the field of view, in millimeters, for a Camera. It
+  # must be between 1 and 120, inclusive.
+  #
+  # This is only valid on a perspective camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   fov = camera.fov = 56.78
+  #   if (fov)
+  #     UI.messagebox fov.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param fov
+  #   A field of view in millimeters.
+  #
+  # @return fov - the new field of view if successful
+  #
+  # @version SketchUp 6.0
+  def fov=(fov)
+  end
+
+  # The fov_is_height? method indicates whether the field of view is horizontal
+  # or vertical.
+  #
+  # @example
+  #   camera = Sketchup.active_model.active_view.camera
+  #   if camera.fov_is_height?
+  #     fov_vertical = camera.fov
+  #     # Compute the horizontal FOV.
+  #   else
+  #     fov_horizontal = camera.fov
+  #     # Compute the vertical FOV.
+  #   end
+  #
+  # @return [Boolean] bool - true if vertical, false otherwise
+  #
+  # @version SketchUp 2015
+  def fov_is_height?
+  end
+
+  # The height method retrieves the height of a Camera in inches.
+  #
+  # This is only valid if it is not a perspective camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   camera.perspective = false
+  #   h = camera.height
+  #   if (h)
+  #     UI.messagebox h.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return height - height in current units if successful
+  #
+  # @version SketchUp 6.0
+  def height
+  end
+
+  # The height= method is used to set the height for the Camera in inches.
+  #
+  # This is only valid if it is not a perspective camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   camera.perspective = false
+  #   h = camera.height = 20
+  #   if (h)
+  #     UI.messagebox h.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param [Float] value
+  #
+  # @return height - height in current units if successful
+  #
+  # @version SketchUp 6.0
+  def height=(value)
+  end
+
+  # The image_width method retrieves the size of the image on the image plane of
+  # the Camera.
+  #
+  # By default, this value is not set. If it is set, it is used in the
+  # calculation of the focal length from the field of view. Unlike most length
+  # values in SketchUp, the image_width and focal_length values are specified in
+  # millimeters rather than in inches.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   w = camera.image_width
+  #   if (w)
+  #     UI.messagebox w.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return width - the width of the camera if successful
+  #
+  # @version SketchUp 6.0
+  def image_width
+  end
+
+  # The image_width= method is used to set the size of the image on the "film"
+  # for a perspective camera.
+  #
+  # The value is given in millimeters. It is used in the conversions between
+  # field of view and focal length.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   w = camera.image_width=1.0
+  #   if (w)
+  #     UI.messagebox w.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @param [Float] value
+  #
+  # @return width - the width of the camera if successful
+  #
+  # @version SketchUp 6.0
+  def image_width=(value)
+  end
+
+  # Returns a new camera with eye (where the camera is) and targets (where the
+  # camera is looking).
+  #
+  # @example
+  #   eye = Geom::Point3d.new(20, 5, 30)
+  #   target = Geom::Point3d.new(20, 60, 25)
+  #   up = Z_AXIS
+  #   camera = Sketchup::Camera.new(eye, target, up)
+  #
+  # @example Default paramaters
+  #   camera = Sketchup::Camera.new
+  #
+  # @overload initialize
+  #
+  #   @return [Sketchup::Camera]
+  #
+  # @overload initialize(eye, target, up, perspective = true, fov = 30.0)
+  #
+  #   @param [Geom::Point3d] eye  See {#eye}.
+  #   @param [Geom::Point3d] target  See {#target}.
+  #   @param [Geom::Point3d] up  See {#up}.
+  #   @param [Boolean] perspective  see {#perspective?}.
+  #   @param [Float] fov  see {#fov}.
+  #   @return [Sketchup::Camera]
+  #
+  # @version SketchUp 6.0
+  def initialize(*args)
+  end
+
+  # The is_2d? method indicates if the camera is in 2d mode. 2 point
+  # perspective mode and PhotoMatch mode are 2d cameras.
+  #
+  # @example
+  #   Sketchup.active_model.active_view.camera.is_2d?
+  #
+  # @return [Boolean] Boolean - true if camera is in 2d mode, false otherwise
+  #
+  # @version SketchUp 2015
+  def is_2d?
+  end
+
+  # The perspective= method is used to set whether or not this is a perspective
+  # camera or an orthographic camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   status = camera.perspective = false
+  #   if (status)
+  #     UI.messagebox "Perspective"
+  #   else
+  #     UI.messagebox "Orthographic"
+  #   end
+  #
+  # @param perspective
+  #   true for perspective, false for orthographic
+  #
+  # @return status - true if perspective, false if orthographic
+  #
+  # @version SketchUp 6.0
+  def perspective=(perspective)
+  end
+
+  # The perspective? method is used to determine whether a camera is a
+  # perspective or orthographic camera.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   status = camera.perspective?
+  #   if (status)
+  #     UI.messagebox "Perspective"
+  #   else
+  #     UI.messagebox "Orthographic"
+  #   end
+  #
+  # @return [Boolean] status - true if perspective, false if orthographic
+  #
+  # @version SketchUp 6.0
+  def perspective?
+  end
+
+  # The scale_2d method returns a float indicating the scaling factor of 2d
+  # cameras.
+  #
+  # When the camera is in two-point perspective and the user uses the zoom tools,
+  # this value will change. Zooming out will produce a value greater than 1.0.
+  #
+  # @example
+  #   Sketchup.active_model.active_view.camera.scale_2d
+  #
+  # @return float
+  #
+  # @version SketchUp 2015
+  def scale_2d
+  end
+
+  # The {#set} method sets the camera orientation. You have to set the camera eye,
+  # target and up parameters at the same time to make sure that you have a valid
+  # camera definition.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   eye = Geom::Point3d.new(20, 5, 30)
+  #   target = Geom::Point3d.new(20, 60, 25)
+  #   up = Z_AXIS
+  #   camera.set(eye, target, up)
+  #
+  # @param [Geom::Point3d] eye
+  #   See {#eye}.
+  #
+  # @param [Geom::Point3d] target
+  #   See {#target}.
+  #
+  # @param [Geom::Point3d] up
+  #   See {#up}.
+  #
+  # @return [Sketchup::Camera]
+  #
+  # @version SketchUp 6.0
+  def set(eye, target, up)
+  end
+
+  # The target method retrieves Point3d that the camera is pointing at.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # Target point is 0,0,0
+  #   t = camera.target
+  #   if (t)
+  #     UI.messagebox t.to_s
+  #   else
+  #     UI.messagebox "Failure".
+  #   end
+  #
+  # @return target - a Point3d object if successful
+  #
+  # @version SketchUp 6.0
+  def target
+  end
+
+  # The up method is used to retrieve the up vector for the camera. This is the
+  # direction that the top of the camera is facing.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # 0.0, 1.0, 0.0
+  #   up = camera.up
+  #   if (up)
+  #     UI.messagebox up.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return up - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def up
+  end
+
+  # The xaxis method is used to retrieve the x axis of the camera coordinate
+  # system defined by the camera's direction and up vector.
+  #
+  # This value is computed from the cross product between the camera direction
+  # and the up vector.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # 1.0, 0.0, 0.0
+  #   v = camera.xaxis
+  #   if (v)
+  #     UI.messagebox v.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def xaxis
+  end
+
+  # The yaxis method retrieves the y axis of the camera coordinate system
+  # defined by the camera's direction and up vector.
+  #
+  # This value is computed to be perpendicular the camera x and z axes. It is
+  # equivalent to the up direction, but is computed to make sure that it is
+  # perpendicular to the direction.
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # 0.0, 1.0, 0.0
+  #   v = camera.yaxis
+  #   if (v)
+  #     UI.messagebox v.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def yaxis
+  end
+
+  # The zaxis method retrieves the z axis of the camera coordinate system
+  # defined by the camera's direction and up vector.
+  #
+  # This value is computed. It is the same as Camera.direction
+  #
+  # @example
+  #   camera = Sketchup::Camera.new
+  #   # 0.0, 1.0, 0.0
+  #   v = camera.zaxis
+  #   if (v)
+  #     UI.messagebox v.to_s
+  #   else
+  #     UI.messagebox "Failure"
+  #   end
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def zaxis
+  end
+
+end