simpletool 0.0.1 → 0.0.2

data/lib/support/phpmyadmin/phpmyadmin/libraries/phpseclib/Crypt/Base.php

@@ -0,0 +1,1984 @@
+<?php
+
+/**
+ * Base Class for all Crypt_* cipher classes
+ *
+ * PHP versions 4 and 5
+ *
+ * Internally for phpseclib developers:
+ *  If you plan to add a new cipher class, please note following rules:
+ *
+ *  - The new Crypt_* cipher class should extend Crypt_Base
+ *
+ *  - Following methods are then required to be overridden/overloaded:
+ *
+ *    - _encryptBlock()
+ *
+ *    - _decryptBlock()
+ *
+ *    - _setupKey()
+ *
+ *  - All other methods are optional to be overridden/overloaded
+ *
+ *  - Look at the source code of the current ciphers how they extend Crypt_Base
+ *    and take one of them as a start up for the new cipher class.
+ *
+ *  - Please read all the other comments/notes/hints here also for each class var/method
+ *
+ * LICENSE: Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * @category  Crypt
+ * @package   Crypt_Base
+ * @author    Jim Wigginton <terrafrost@php.net>
+ * @author    Hans-Juergen Petrich <petrich@tronic-media.com>
+ * @copyright MMVII Jim Wigginton
+ * @license   http://www.opensource.org/licenses/mit-license.html  MIT License
+ * @link      http://phpseclib.sourceforge.net
+ */
+
+/**#@+
+ * @access public
+ * @see Crypt_Base::encrypt()
+ * @see Crypt_Base::decrypt()
+ */
+/**
+ * Encrypt / decrypt using the Counter mode.
+ *
+ * Set to -1 since that's what Crypt/Random.php uses to index the CTR mode.
+ *
+ * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Counter_.28CTR.29
+ */
+define('CRYPT_MODE_CTR', -1);
+/**
+ * Encrypt / decrypt using the Electronic Code Book mode.
+ *
+ * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Electronic_codebook_.28ECB.29
+ */
+define('CRYPT_MODE_ECB', 1);
+/**
+ * Encrypt / decrypt using the Code Book Chaining mode.
+ *
+ * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher-block_chaining_.28CBC.29
+ */
+define('CRYPT_MODE_CBC', 2);
+/**
+ * Encrypt / decrypt using the Cipher Feedback mode.
+ *
+ * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher_feedback_.28CFB.29
+ */
+define('CRYPT_MODE_CFB', 3);
+/**
+ * Encrypt / decrypt using the Output Feedback mode.
+ *
+ * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Output_feedback_.28OFB.29
+ */
+define('CRYPT_MODE_OFB', 4);
+/**
+ * Encrypt / decrypt using streaming mode.
+ *
+ */
+define('CRYPT_MODE_STREAM', 5);
+/**#@-*/
+
+/**#@+
+ * @access private
+ * @see Crypt_Base::Crypt_Base()
+ */
+/**
+ * Base value for the internal implementation $engine switch
+ */
+define('CRYPT_MODE_INTERNAL', 1);
+/**
+ * Base value for the mcrypt implementation $engine switch
+ */
+define('CRYPT_MODE_MCRYPT', 2);
+/**#@-*/
+
+/**
+ * Base Class for all Crypt_* cipher classes
+ *
+ * @package Crypt_Base
+ * @author  Jim Wigginton <terrafrost@php.net>
+ * @author  Hans-Juergen Petrich <petrich@tronic-media.com>
+ * @access  public
+ */
+class Crypt_Base
+{
+    /**
+     * The Encryption Mode
+     *
+     * @see Crypt_Base::Crypt_Base()
+     * @var Integer
+     * @access private
+     */
+    var $mode;
+
+    /**
+     * The Block Length of the block cipher
+     *
+     * @var Integer
+     * @access private
+     */
+    var $block_size = 16;
+
+    /**
+     * The Key
+     *
+     * @see Crypt_Base::setKey()
+     * @var String
+     * @access private
+     */
+    var $key = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
+
+    /**
+     * The Initialization Vector
+     *
+     * @see Crypt_Base::setIV()
+     * @var String
+     * @access private
+     */
+    var $iv;
+
+    /**
+     * A "sliding" Initialization Vector
+     *
+     * @see Crypt_Base::enableContinuousBuffer()
+     * @see Crypt_Base::_clearBuffers()
+     * @var String
+     * @access private
+     */
+    var $encryptIV;
+
+    /**
+     * A "sliding" Initialization Vector
+     *
+     * @see Crypt_Base::enableContinuousBuffer()
+     * @see Crypt_Base::_clearBuffers()
+     * @var String
+     * @access private
+     */
+    var $decryptIV;
+
+    /**
+     * Continuous Buffer status
+     *
+     * @see Crypt_Base::enableContinuousBuffer()
+     * @var Boolean
+     * @access private
+     */
+    var $continuousBuffer = false;
+
+    /**
+     * Encryption buffer for CTR, OFB and CFB modes
+     *
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::_clearBuffers()
+     * @var Array
+     * @access private
+     */
+    var $enbuffer;
+
+    /**
+     * Decryption buffer for CTR, OFB and CFB modes
+     *
+     * @see Crypt_Base::decrypt()
+     * @see Crypt_Base::_clearBuffers()
+     * @var Array
+     * @access private
+     */
+    var $debuffer;
+
+    /**
+     * mcrypt resource for encryption
+     *
+     * The mcrypt resource can be recreated every time something needs to be created or it can be created just once.
+     * Since mcrypt operates in continuous mode, by default, it'll need to be recreated when in non-continuous mode.
+     *
+     * @see Crypt_Base::encrypt()
+     * @var Resource
+     * @access private
+     */
+    var $enmcrypt;
+
+    /**
+     * mcrypt resource for decryption
+     *
+     * The mcrypt resource can be recreated every time something needs to be created or it can be created just once.
+     * Since mcrypt operates in continuous mode, by default, it'll need to be recreated when in non-continuous mode.
+     *
+     * @see Crypt_Base::decrypt()
+     * @var Resource
+     * @access private
+     */
+    var $demcrypt;
+
+    /**
+     * Does the enmcrypt resource need to be (re)initialized?
+     *
+     * @see Crypt_Twofish::setKey()
+     * @see Crypt_Twofish::setIV()
+     * @var Boolean
+     * @access private
+     */
+    var $enchanged = true;
+
+    /**
+     * Does the demcrypt resource need to be (re)initialized?
+     *
+     * @see Crypt_Twofish::setKey()
+     * @see Crypt_Twofish::setIV()
+     * @var Boolean
+     * @access private
+     */
+    var $dechanged = true;
+
+    /**
+     * mcrypt resource for CFB mode
+     *
+     * mcrypt's CFB mode, in (and only in) buffered context,
+     * is broken, so phpseclib implements the CFB mode by it self,
+     * even when the mcrypt php extension is available.
+     *
+     * In order to do the CFB-mode work (fast) phpseclib
+     * use a separate ECB-mode mcrypt resource.
+     *
+     * @link http://phpseclib.sourceforge.net/cfb-demo.phps
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @see Crypt_Base::_setupMcrypt()
+     * @var Resource
+     * @access private
+     */
+    var $ecb;
+
+    /**
+     * Optimizing value while CFB-encrypting
+     *
+     * Only relevant if $continuousBuffer enabled
+     * and $engine == CRYPT_MODE_MCRYPT
+     *
+     * It's faster to re-init $enmcrypt if
+     * $buffer bytes > $cfb_init_len than
+     * using the $ecb resource furthermore.
+     *
+     * This value depends of the chosen cipher
+     * and the time it would be needed for it's
+     * initialization [by mcrypt_generic_init()]
+     * which, typically, depends on the complexity
+     * on its internaly Key-expanding algorithm.
+     *
+     * @see Crypt_Base::encrypt()
+     * @var Integer
+     * @access private
+     */
+    var $cfb_init_len = 600;
+
+    /**
+     * Does internal cipher state need to be (re)initialized?
+     *
+     * @see setKey()
+     * @see setIV()
+     * @see disableContinuousBuffer()
+     * @var Boolean
+     * @access private
+     */
+    var $changed = true;
+
+    /**
+     * Padding status
+     *
+     * @see Crypt_Base::enablePadding()
+     * @var Boolean
+     * @access private
+     */
+    var $padding = true;
+
+    /**
+     * Is the mode one that is paddable?
+     *
+     * @see Crypt_Base::Crypt_Base()
+     * @var Boolean
+     * @access private
+     */
+    var $paddable = false;
+
+    /**
+     * Holds which crypt engine internaly should be use,
+     * which will be determined automatically on __construct()
+     *
+     * Currently available $engines are:
+     * - CRYPT_MODE_MCRYPT   (fast, php-extension: mcrypt, extension_loaded('mcrypt') required)
+     * - CRYPT_MODE_INTERNAL (slower, pure php-engine, no php-extension required)
+     *
+     * In the pipeline... maybe. But currently not available:
+     * - CRYPT_MODE_OPENSSL  (very fast, php-extension: openssl, extension_loaded('openssl') required)
+     *
+     * If possible, CRYPT_MODE_MCRYPT will be used for each cipher.
+     * Otherwise CRYPT_MODE_INTERNAL
+     *
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @var Integer
+     * @access private
+     */
+    var $engine;
+
+    /**
+     * The mcrypt specific name of the cipher
+     *
+     * Only used if $engine == CRYPT_MODE_MCRYPT
+     *
+     * @link http://www.php.net/mcrypt_module_open
+     * @link http://www.php.net/mcrypt_list_algorithms
+     * @see Crypt_Base::_setupMcrypt()
+     * @var String
+     * @access private
+     */
+    var $cipher_name_mcrypt;
+
+    /**
+     * The default password key_size used by setPassword()
+     *
+     * @see Crypt_Base::setPassword()
+     * @var Integer
+     * @access private
+     */
+    var $password_key_size = 32;
+
+    /**
+     * The default salt used by setPassword()
+     *
+     * @see Crypt_Base::setPassword()
+     * @var String
+     * @access private
+     */
+    var $password_default_salt = 'phpseclib/salt';
+
+    /**
+     * The namespace used by the cipher for its constants.
+     *
+     * ie: AES.php is using CRYPT_AES_MODE_* for its constants
+     *     so $const_namespace is AES
+     *
+     *     DES.php is using CRYPT_DES_MODE_* for its constants
+     *     so $const_namespace is DES... and so on
+     *
+     * All CRYPT_<$const_namespace>_MODE_* are aliases of
+     * the generic CRYPT_MODE_* constants, so both could be used
+     * for each cipher.
+     *
+     * Example:
+     * $aes = new Crypt_AES(CRYPT_AES_MODE_CFB); // $aes will operate in cfb mode
+     * $aes = new Crypt_AES(CRYPT_MODE_CFB);     // identical
+     *
+     * @see Crypt_Base::Crypt_Base()
+     * @var String
+     * @access private
+     */
+    var $const_namespace;
+
+    /**
+     * The name of the performance-optimized callback function
+     *
+     * Used by encrypt() / decrypt()
+     * only if $engine == CRYPT_MODE_INTERNAL
+     *
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @see Crypt_Base::_setupInlineCrypt()
+     * @see Crypt_Base::$use_inline_crypt
+     * @var Callback
+     * @access private
+     */
+    var $inline_crypt;
+
+    /**
+     * Holds whether performance-optimized $inline_crypt() can/should be used.
+     *
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @see Crypt_Base::inline_crypt
+     * @var mixed
+     * @access private
+     */
+    var $use_inline_crypt;
+
+    /**
+     * Default Constructor.
+     *
+     * Determines whether or not the mcrypt extension should be used.
+     *
+     * $mode could be:
+     *
+     * - CRYPT_MODE_ECB
+     *
+     * - CRYPT_MODE_CBC
+     *
+     * - CRYPT_MODE_CTR
+     *
+     * - CRYPT_MODE_CFB
+     *
+     * - CRYPT_MODE_OFB
+     *
+     * (or the alias constants of the chosen cipher, for example for AES: CRYPT_AES_MODE_ECB or CRYPT_AES_MODE_CBC ...)
+     *
+     * If not explicitly set, CRYPT_MODE_CBC will be used.
+     *
+     * @param optional Integer $mode
+     * @access public
+     */
+    function Crypt_Base($mode = CRYPT_MODE_CBC)
+    {
+        $const_crypt_mode = 'CRYPT_' . $this->const_namespace . '_MODE';
+
+        // Determining the availibility of mcrypt support for the cipher
+        if (!defined($const_crypt_mode)) {
+            switch (true) {
+                case extension_loaded('mcrypt') && in_array($this->cipher_name_mcrypt, mcrypt_list_algorithms()):
+                    define($const_crypt_mode, CRYPT_MODE_MCRYPT);
+                    break;
+                default:
+                    define($const_crypt_mode, CRYPT_MODE_INTERNAL);
+            }
+        }
+
+        // Determining which internal $engine should be used.
+        // The fastes possible first.
+        switch (true) {
+            case empty($this->cipher_name_mcrypt): // The cipher module has no mcrypt-engine support at all so we force CRYPT_MODE_INTERNAL
+                $this->engine = CRYPT_MODE_INTERNAL;
+                break;
+            case constant($const_crypt_mode) == CRYPT_MODE_MCRYPT:
+                $this->engine = CRYPT_MODE_MCRYPT;
+                break;
+            default:
+                $this->engine = CRYPT_MODE_INTERNAL;
+        }
+
+        // $mode dependent settings
+        switch ($mode) {
+            case CRYPT_MODE_ECB:
+                $this->paddable = true;
+                $this->mode = $mode;
+                break;
+            case CRYPT_MODE_CTR:
+            case CRYPT_MODE_CFB:
+            case CRYPT_MODE_OFB:
+            case CRYPT_MODE_STREAM:
+                $this->mode = $mode;
+                break;
+            case CRYPT_MODE_CBC:
+            default:
+                $this->paddable = true;
+                $this->mode = CRYPT_MODE_CBC;
+        }
+
+        // Determining whether inline crypting can be used by the cipher
+        if ($this->use_inline_crypt !== false && function_exists('create_function')) {
+            $this->use_inline_crypt = true;
+        }
+    }
+
+    /**
+     * Sets the initialization vector. (optional)
+     *
+     * SetIV is not required when CRYPT_MODE_ECB (or ie for AES: CRYPT_AES_MODE_ECB) is being used.  If not explicitly set, it'll be assumed
+     * to be all zero's.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @access public
+     * @param String $iv
+     */
+    function setIV($iv)
+    {
+        if ($this->mode == CRYPT_MODE_ECB) {
+            return;
+        }
+
+        $this->iv = $iv;
+        $this->changed = true;
+    }
+
+    /**
+     * Sets the key.
+     *
+     * The min/max length(s) of the key depends on the cipher which is used.
+     * If the key not fits the length(s) of the cipher it will paded with null bytes
+     * up to the closest valid key length.  If the key is more than max length,
+     * we trim the excess bits.
+     *
+     * If the key is not explicitly set, it'll be assumed to be all null bytes.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @access public
+     * @param String $key
+     */
+    function setKey($key)
+    {
+        $this->key = $key;
+        $this->changed = true;
+    }
+
+    /**
+     * Sets the password.
+     *
+     * Depending on what $method is set to, setPassword()'s (optional) parameters are as follows:
+     *     {@link http://en.wikipedia.org/wiki/PBKDF2 pbkdf2}:
+     *         $hash, $salt, $count, $dkLen
+     *
+     *         Where $hash (default = sha1) currently supports the following hashes: see: Crypt/Hash.php
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see Crypt/Hash.php
+     * @param String $password
+     * @param optional String $method
+     * @access public
+     */
+    function setPassword($password, $method = 'pbkdf2')
+    {
+        $key = '';
+
+        switch ($method) {
+            default: // 'pbkdf2'
+                $func_args = func_get_args();
+
+                // Hash function
+                $hash = isset($func_args[2]) ? $func_args[2] : 'sha1';
+
+                // WPA and WPA2 use the SSID as the salt
+                $salt = isset($func_args[3]) ? $func_args[3] : $this->password_default_salt;
+
+                // RFC2898#section-4.2 uses 1,000 iterations by default
+                // WPA and WPA2 use 4,096.
+                $count = isset($func_args[4]) ? $func_args[4] : 1000;
+
+                // Keylength
+                $dkLen = isset($func_args[5]) ? $func_args[5] : $this->password_key_size;
+
+                // Determining if php[>=5.5.0]'s hash_pbkdf2() function avail- and useable
+                switch (true) {
+                    case !function_exists('hash_pbkdf2'):
+                    case !function_exists('hash_algos'):
+                    case !in_array($hash, hash_algos()):
+                        if (!class_exists('Crypt_Hash')) {
+                            include_once 'Crypt/Hash.php';
+                        }
+                        $i = 1;
+                        while (strlen($key) < $dkLen) {
+                            $hmac = new Crypt_Hash();
+                            $hmac->setHash($hash);
+                            $hmac->setKey($password);
+                            $f = $u = $hmac->hash($salt . pack('N', $i++));
+                            for ($j = 2; $j <= $count; ++$j) {
+                                $u = $hmac->hash($u);
+                                $f^= $u;
+                            }
+                            $key.= $f;
+                        }
+                        $key = substr($key, 0, $dkLen);
+                        break;
+                    default:
+                        $key = hash_pbkdf2($hash, $password, $salt, $count, $dkLen, true);
+                }
+        }
+
+        $this->setKey($key);
+    }
+
+    /**
+     * Encrypts a message.
+     *
+     * $plaintext will be padded with additional bytes such that it's length is a multiple of the block size. Other cipher
+     * implementations may or may not pad in the same manner.  Other common approaches to padding and the reasons why it's
+     * necessary are discussed in the following
+     * URL:
+     *
+     * {@link http://www.di-mgt.com.au/cryptopad.html http://www.di-mgt.com.au/cryptopad.html}
+     *
+     * An alternative to padding is to, separately, send the length of the file.  This is what SSH, in fact, does.
+     * strlen($plaintext) will still need to be a multiple of the block size, however, arbitrary values can be added to make it that
+     * length.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see Crypt_Base::decrypt()
+     * @access public
+     * @param String $plaintext
+     * @return String $cipertext
+     */
+    function encrypt($plaintext)
+    {
+        if ($this->engine == CRYPT_MODE_MCRYPT) {
+            if ($this->changed) {
+                $this->_setupMcrypt();
+                $this->changed = false;
+            }
+            if ($this->enchanged) {
+                mcrypt_generic_init($this->enmcrypt, $this->key, $this->encryptIV);
+                $this->enchanged = false;
+            }
+
+            // re: {@link http://phpseclib.sourceforge.net/cfb-demo.phps}
+            // using mcrypt's default handing of CFB the above would output two different things.  using phpseclib's
+            // rewritten CFB implementation the above outputs the same thing twice.
+            if ($this->mode == CRYPT_MODE_CFB && $this->continuousBuffer) {
+                $block_size = $this->block_size;
+                $iv = &$this->encryptIV;
+                $pos = &$this->enbuffer['pos'];
+                $len = strlen($plaintext);
+                $ciphertext = '';
+                $i = 0;
+                if ($pos) {
+                    $orig_pos = $pos;
+                    $max = $block_size - $pos;
+                    if ($len >= $max) {
+                        $i = $max;
+                        $len-= $max;
+                        $pos = 0;
+                    } else {
+                        $i = $len;
+                        $pos+= $len;
+                        $len = 0;
+                    }
+                    $ciphertext = substr($iv, $orig_pos) ^ $plaintext;
+                    $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
+                    $this->enbuffer['enmcrypt_init'] = true;
+                }
+                if ($len >= $block_size) {
+                    if ($this->enbuffer['enmcrypt_init'] === false || $len > $this->cfb_init_len) {
+                        if ($this->enbuffer['enmcrypt_init'] === true) {
+                            mcrypt_generic_init($this->enmcrypt, $this->key, $iv);
+                            $this->enbuffer['enmcrypt_init'] = false;
+                        }
+                        $ciphertext.= mcrypt_generic($this->enmcrypt, substr($plaintext, $i, $len - $len % $block_size));
+                        $iv = substr($ciphertext, -$block_size);
+                        $len%= $block_size;
+                    } else {
+                        while ($len >= $block_size) {
+                            $iv = mcrypt_generic($this->ecb, $iv) ^ substr($plaintext, $i, $block_size);
+                            $ciphertext.= $iv;
+                            $len-= $block_size;
+                            $i+= $block_size;
+                        }
+                    }
+                }
+
+                if ($len) {
+                    $iv = mcrypt_generic($this->ecb, $iv);
+                    $block = $iv ^ substr($plaintext, -$len);
+                    $iv = substr_replace($iv, $block, 0, $len);
+                    $ciphertext.= $block;
+                    $pos = $len;
+                }
+
+                return $ciphertext;
+            }
+
+            if ($this->paddable) {
+                $plaintext = $this->_pad($plaintext);
+            }
+
+            $ciphertext = mcrypt_generic($this->enmcrypt, $plaintext);
+
+            if (!$this->continuousBuffer) {
+                mcrypt_generic_init($this->enmcrypt, $this->key, $this->encryptIV);
+            }
+
+            return $ciphertext;
+        }
+
+        if ($this->changed) {
+            $this->_setup();
+            $this->changed = false;
+        }
+        if ($this->use_inline_crypt) {
+            $inline = $this->inline_crypt;
+            return $inline('encrypt', $this, $plaintext);
+        }
+        if ($this->paddable) {
+            $plaintext = $this->_pad($plaintext);
+        }
+
+        $buffer = &$this->enbuffer;
+        $block_size = $this->block_size;
+        $ciphertext = '';
+        switch ($this->mode) {
+            case CRYPT_MODE_ECB:
+                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                    $ciphertext.= $this->_encryptBlock(substr($plaintext, $i, $block_size));
+                }
+                break;
+            case CRYPT_MODE_CBC:
+                $xor = $this->encryptIV;
+                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                    $block = substr($plaintext, $i, $block_size);
+                    $block = $this->_encryptBlock($block ^ $xor);
+                    $xor = $block;
+                    $ciphertext.= $block;
+                }
+                if ($this->continuousBuffer) {
+                    $this->encryptIV = $xor;
+                }
+                break;
+            case CRYPT_MODE_CTR:
+                $xor = $this->encryptIV;
+                if (strlen($buffer['encrypted'])) {
+                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                        $block = substr($plaintext, $i, $block_size);
+                        if (strlen($block) > strlen($buffer['encrypted'])) {
+                            $buffer['encrypted'].= $this->_encryptBlock($this->_generateXor($xor, $block_size));
+                        }
+                        $key = $this->_stringShift($buffer['encrypted'], $block_size);
+                        $ciphertext.= $block ^ $key;
+                    }
+                } else {
+                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                        $block = substr($plaintext, $i, $block_size);
+                        $key = $this->_encryptBlock($this->_generateXor($xor, $block_size));
+                        $ciphertext.= $block ^ $key;
+                    }
+                }
+                if ($this->continuousBuffer) {
+                    $this->encryptIV = $xor;
+                    if ($start = strlen($plaintext) % $block_size) {
+                        $buffer['encrypted'] = substr($key, $start) . $buffer['encrypted'];
+                    }
+                }
+                break;
+            case CRYPT_MODE_CFB:
+                // cfb loosely routines inspired by openssl's:
+                // {@link http://cvs.openssl.org/fileview?f=openssl/crypto/modes/cfb128.c&v=1.3.2.2.2.1}
+                if ($this->continuousBuffer) {
+                    $iv = &$this->encryptIV;
+                    $pos = &$buffer['pos'];
+                } else {
+                    $iv = $this->encryptIV;
+                    $pos = 0;
+                }
+                $len = strlen($plaintext);
+                $i = 0;
+                if ($pos) {
+                    $orig_pos = $pos;
+                    $max = $block_size - $pos;
+                    if ($len >= $max) {
+                        $i = $max;
+                        $len-= $max;
+                        $pos = 0;
+                    } else {
+                        $i = $len;
+                        $pos+= $len;
+                        $len = 0;
+                    }
+                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
+                    $ciphertext = substr($iv, $orig_pos) ^ $plaintext;
+                    $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
+                }
+                while ($len >= $block_size) {
+                    $iv = $this->_encryptBlock($iv) ^ substr($plaintext, $i, $block_size);
+                    $ciphertext.= $iv;
+                    $len-= $block_size;
+                    $i+= $block_size;
+                }
+                if ($len) {
+                    $iv = $this->_encryptBlock($iv);
+                    $block = $iv ^ substr($plaintext, $i);
+                    $iv = substr_replace($iv, $block, 0, $len);
+                    $ciphertext.= $block;
+                    $pos = $len;
+                }
+                break;
+            case CRYPT_MODE_OFB:
+                $xor = $this->encryptIV;
+                if (strlen($buffer['xor'])) {
+                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                        $block = substr($plaintext, $i, $block_size);
+                        if (strlen($block) > strlen($buffer['xor'])) {
+                            $xor = $this->_encryptBlock($xor);
+                            $buffer['xor'].= $xor;
+                        }
+                        $key = $this->_stringShift($buffer['xor'], $block_size);
+                        $ciphertext.= $block ^ $key;
+                    }
+                } else {
+                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
+                        $xor = $this->_encryptBlock($xor);
+                        $ciphertext.= substr($plaintext, $i, $block_size) ^ $xor;
+                    }
+                    $key = $xor;
+                }
+                if ($this->continuousBuffer) {
+                    $this->encryptIV = $xor;
+                    if ($start = strlen($plaintext) % $block_size) {
+                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
+                    }
+                }
+                break;
+            case CRYPT_MODE_STREAM:
+                $ciphertext = $this->_encryptBlock($plaintext);
+                break;
+        }
+
+        return $ciphertext;
+    }
+
+    /**
+     * Decrypts a message.
+     *
+     * If strlen($ciphertext) is not a multiple of the block size, null bytes will be added to the end of the string until
+     * it is.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see Crypt_Base::encrypt()
+     * @access public
+     * @param String $ciphertext
+     * @return String $plaintext
+     */
+    function decrypt($ciphertext)
+    {
+        if ($this->engine == CRYPT_MODE_MCRYPT) {
+            $block_size = $this->block_size;
+            if ($this->changed) {
+                $this->_setupMcrypt();
+                $this->changed = false;
+            }
+            if ($this->dechanged) {
+                mcrypt_generic_init($this->demcrypt, $this->key, $this->decryptIV);
+                $this->dechanged = false;
+            }
+
+            if ($this->mode == CRYPT_MODE_CFB && $this->continuousBuffer) {
+                $iv = &$this->decryptIV;
+                $pos = &$this->debuffer['pos'];
+                $len = strlen($ciphertext);
+                $plaintext = '';
+                $i = 0;
+                if ($pos) {
+                    $orig_pos = $pos;
+                    $max = $block_size - $pos;
+                    if ($len >= $max) {
+                        $i = $max;
+                        $len-= $max;
+                        $pos = 0;
+                    } else {
+                        $i = $len;
+                        $pos+= $len;
+                        $len = 0;
+                    }
+                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
+                    $plaintext = substr($iv, $orig_pos) ^ $ciphertext;
+                    $iv = substr_replace($iv, substr($ciphertext, 0, $i), $orig_pos, $i);
+                }
+                if ($len >= $block_size) {
+                    $cb = substr($ciphertext, $i, $len - $len % $block_size);
+                    $plaintext.= mcrypt_generic($this->ecb, $iv . $cb) ^ $cb;
+                    $iv = substr($cb, -$block_size);
+                    $len%= $block_size;
+                }
+                if ($len) {
+                    $iv = mcrypt_generic($this->ecb, $iv);
+                    $plaintext.= $iv ^ substr($ciphertext, -$len);
+                    $iv = substr_replace($iv, substr($ciphertext, -$len), 0, $len);
+                    $pos = $len;
+                }
+
+                return $plaintext;
+            }
+
+            if ($this->paddable) {
+                // we pad with chr(0) since that's what mcrypt_generic does.  to quote from {@link http://www.php.net/function.mcrypt-generic}:
+                // "The data is padded with "\0" to make sure the length of the data is n * blocksize."
+                $ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($block_size - strlen($ciphertext) % $block_size) % $block_size, chr(0));
+            }
+
+            $plaintext = mdecrypt_generic($this->demcrypt, $ciphertext);
+
+            if (!$this->continuousBuffer) {
+                mcrypt_generic_init($this->demcrypt, $this->key, $this->decryptIV);
+            }
+
+            return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
+        }
+
+        if ($this->changed) {
+            $this->_setup();
+            $this->changed = false;
+        }
+        if ($this->use_inline_crypt) {
+            $inline = $this->inline_crypt;
+            return $inline('decrypt', $this, $ciphertext);
+        }
+
+        $block_size = $this->block_size;
+        if ($this->paddable) {
+            // we pad with chr(0) since that's what mcrypt_generic does [...]
+            $ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($block_size - strlen($ciphertext) % $block_size) % $block_size, chr(0));
+        }
+
+        $buffer = &$this->debuffer;
+        $plaintext = '';
+        switch ($this->mode) {
+            case CRYPT_MODE_ECB:
+                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                    $plaintext.= $this->_decryptBlock(substr($ciphertext, $i, $block_size));
+                }
+                break;
+            case CRYPT_MODE_CBC:
+                $xor = $this->decryptIV;
+                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                    $block = substr($ciphertext, $i, $block_size);
+                    $plaintext.= $this->_decryptBlock($block) ^ $xor;
+                    $xor = $block;
+                }
+                if ($this->continuousBuffer) {
+                    $this->decryptIV = $xor;
+                }
+                break;
+            case CRYPT_MODE_CTR:
+                $xor = $this->decryptIV;
+                if (strlen($buffer['ciphertext'])) {
+                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                        $block = substr($ciphertext, $i, $block_size);
+                        if (strlen($block) > strlen($buffer['ciphertext'])) {
+                            $buffer['ciphertext'].= $this->_encryptBlock($this->_generateXor($xor, $block_size));
+                        }
+                        $key = $this->_stringShift($buffer['ciphertext'], $block_size);
+                        $plaintext.= $block ^ $key;
+                    }
+                } else {
+                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                        $block = substr($ciphertext, $i, $block_size);
+                        $key = $this->_encryptBlock($this->_generateXor($xor, $block_size));
+                        $plaintext.= $block ^ $key;
+                    }
+                }
+                if ($this->continuousBuffer) {
+                    $this->decryptIV = $xor;
+                    if ($start = strlen($ciphertext) % $block_size) {
+                        $buffer['ciphertext'] = substr($key, $start) . $buffer['ciphertext'];
+                    }
+                }
+                break;
+            case CRYPT_MODE_CFB:
+                if ($this->continuousBuffer) {
+                    $iv = &$this->decryptIV;
+                    $pos = &$buffer['pos'];
+                } else {
+                    $iv = $this->decryptIV;
+                    $pos = 0;
+                }
+                $len = strlen($ciphertext);
+                $i = 0;
+                if ($pos) {
+                    $orig_pos = $pos;
+                    $max = $block_size - $pos;
+                    if ($len >= $max) {
+                        $i = $max;
+                        $len-= $max;
+                        $pos = 0;
+                    } else {
+                        $i = $len;
+                        $pos+= $len;
+                        $len = 0;
+                    }
+                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
+                    $plaintext = substr($iv, $orig_pos) ^ $ciphertext;
+                    $iv = substr_replace($iv, substr($ciphertext, 0, $i), $orig_pos, $i);
+                }
+                while ($len >= $block_size) {
+                    $iv = $this->_encryptBlock($iv);
+                    $cb = substr($ciphertext, $i, $block_size);
+                    $plaintext.= $iv ^ $cb;
+                    $iv = $cb;
+                    $len-= $block_size;
+                    $i+= $block_size;
+                }
+                if ($len) {
+                    $iv = $this->_encryptBlock($iv);
+                    $plaintext.= $iv ^ substr($ciphertext, $i);
+                    $iv = substr_replace($iv, substr($ciphertext, $i), 0, $len);
+                    $pos = $len;
+                }
+                break;
+            case CRYPT_MODE_OFB:
+                $xor = $this->decryptIV;
+                if (strlen($buffer['xor'])) {
+                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                        $block = substr($ciphertext, $i, $block_size);
+                        if (strlen($block) > strlen($buffer['xor'])) {
+                            $xor = $this->_encryptBlock($xor);
+                            $buffer['xor'].= $xor;
+                        }
+                        $key = $this->_stringShift($buffer['xor'], $block_size);
+                        $plaintext.= $block ^ $key;
+                    }
+                } else {
+                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
+                        $xor = $this->_encryptBlock($xor);
+                        $plaintext.= substr($ciphertext, $i, $block_size) ^ $xor;
+                    }
+                    $key = $xor;
+                }
+                if ($this->continuousBuffer) {
+                    $this->decryptIV = $xor;
+                    if ($start = strlen($ciphertext) % $block_size) {
+                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
+                    }
+                }
+                break;
+            case CRYPT_MODE_STREAM:
+                $plaintext = $this->_decryptBlock($ciphertext);
+                break;
+        }
+        return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
+    }
+
+    /**
+     * Pad "packets".
+     *
+     * Block ciphers working by encrypting between their specified [$this->]block_size at a time
+     * If you ever need to encrypt or decrypt something that isn't of the proper length, it becomes necessary to
+     * pad the input so that it is of the proper length.
+     *
+     * Padding is enabled by default.  Sometimes, however, it is undesirable to pad strings.  Such is the case in SSH,
+     * where "packets" are padded with random bytes before being encrypted.  Unpad these packets and you risk stripping
+     * away characters that shouldn't be stripped away. (SSH knows how many bytes are added because the length is
+     * transmitted separately)
+     *
+     * @see Crypt_Base::disablePadding()
+     * @access public
+     */
+    function enablePadding()
+    {
+        $this->padding = true;
+    }
+
+    /**
+     * Do not pad packets.
+     *
+     * @see Crypt_Base::enablePadding()
+     * @access public
+     */
+    function disablePadding()
+    {
+        $this->padding = false;
+    }
+
+    /**
+     * Treat consecutive "packets" as if they are a continuous buffer.
+     *
+     * Say you have a 32-byte plaintext $plaintext.  Using the default behavior, the two following code snippets
+     * will yield different outputs:
+     *
+     * <code>
+     *    echo $rijndael->encrypt(substr($plaintext,  0, 16));
+     *    echo $rijndael->encrypt(substr($plaintext, 16, 16));
+     * </code>
+     * <code>
+     *    echo $rijndael->encrypt($plaintext);
+     * </code>
+     *
+     * The solution is to enable the continuous buffer.  Although this will resolve the above discrepancy, it creates
+     * another, as demonstrated with the following:
+     *
+     * <code>
+     *    $rijndael->encrypt(substr($plaintext, 0, 16));
+     *    echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
+     * </code>
+     * <code>
+     *    echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
+     * </code>
+     *
+     * With the continuous buffer disabled, these would yield the same output.  With it enabled, they yield different
+     * outputs.  The reason is due to the fact that the initialization vector's change after every encryption /
+     * decryption round when the continuous buffer is enabled.  When it's disabled, they remain constant.
+     *
+     * Put another way, when the continuous buffer is enabled, the state of the Crypt_*() object changes after each
+     * encryption / decryption round, whereas otherwise, it'd remain constant.  For this reason, it's recommended that
+     * continuous buffers not be used.  They do offer better security and are, in fact, sometimes required (SSH uses them),
+     * however, they are also less intuitive and more likely to cause you problems.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see Crypt_Base::disableContinuousBuffer()
+     * @access public
+     */
+    function enableContinuousBuffer()
+    {
+        if ($this->mode == CRYPT_MODE_ECB) {
+            return;
+        }
+
+        $this->continuousBuffer = true;
+    }
+
+    /**
+     * Treat consecutive packets as if they are a discontinuous buffer.
+     *
+     * The default behavior.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see Crypt_Base::enableContinuousBuffer()
+     * @access public
+     */
+    function disableContinuousBuffer()
+    {
+        if ($this->mode == CRYPT_MODE_ECB) {
+            return;
+        }
+        if (!$this->continuousBuffer) {
+            return;
+        }
+
+        $this->continuousBuffer = false;
+        $this->changed = true;
+    }
+
+    /**
+     * Encrypts a block
+     *
+     * Note: Must extend by the child Crypt_* class
+     *
+     * @access private
+     * @param String $in
+     * @return String
+     */
+    function _encryptBlock($in)
+    {
+        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
+    }
+
+    /**
+     * Decrypts a block
+     *
+     * Note: Must extend by the child Crypt_* class
+     *
+     * @access private
+     * @param String $in
+     * @return String
+     */
+    function _decryptBlock($in)
+    {
+        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
+    }
+
+    /**
+     * Setup the key (expansion)
+     *
+     * Only used if $engine == CRYPT_MODE_INTERNAL
+     *
+     * Note: Must extend by the child Crypt_* class
+     *
+     * @see Crypt_Base::_setup()
+     * @access private
+     */
+    function _setupKey()
+    {
+        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
+    }
+
+    /**
+     * Setup the CRYPT_MODE_INTERNAL $engine
+     *
+     * (re)init, if necessary, the internal cipher $engine and flush all $buffers
+     * Used (only) if $engine == CRYPT_MODE_INTERNAL
+     *
+     * _setup() will be called each time if $changed === true
+     * typically this happens when using one or more of following public methods:
+     *
+     * - setKey()
+     *
+     * - setIV()
+     *
+     * - disableContinuousBuffer()
+     *
+     * - First run of encrypt() / decrypt() with no init-settings
+     *
+     * Internally: _setup() is called always before(!) en/decryption.
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see setKey()
+     * @see setIV()
+     * @see disableContinuousBuffer()
+     * @access private
+     */
+    function _setup()
+    {
+        $this->_clearBuffers();
+        $this->_setupKey();
+
+        if ($this->use_inline_crypt) {
+            $this->_setupInlineCrypt();
+        }
+    }
+
+    /**
+     * Setup the CRYPT_MODE_MCRYPT $engine
+     *
+     * (re)init, if necessary, the (ext)mcrypt resources and flush all $buffers
+     * Used (only) if $engine = CRYPT_MODE_MCRYPT
+     *
+     * _setupMcrypt() will be called each time if $changed === true
+     * typically this happens when using one or more of following public methods:
+     *
+     * - setKey()
+     *
+     * - setIV()
+     *
+     * - disableContinuousBuffer()
+     *
+     * - First run of encrypt() / decrypt()
+     *
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @see setKey()
+     * @see setIV()
+     * @see disableContinuousBuffer()
+     * @access private
+     */
+    function _setupMcrypt()
+    {
+        $this->_clearBuffers();
+        $this->enchanged = $this->dechanged = true;
+
+        if (!isset($this->enmcrypt)) {
+            static $mcrypt_modes = array(
+                CRYPT_MODE_CTR    => 'ctr',
+                CRYPT_MODE_ECB    => MCRYPT_MODE_ECB,
+                CRYPT_MODE_CBC    => MCRYPT_MODE_CBC,
+                CRYPT_MODE_CFB    => 'ncfb',
+                CRYPT_MODE_OFB    => MCRYPT_MODE_NOFB,
+                CRYPT_MODE_STREAM => MCRYPT_MODE_STREAM,
+            );
+
+            $this->demcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
+            $this->enmcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
+
+            // we need the $ecb mcrypt resource (only) in MODE_CFB with enableContinuousBuffer()
+            // to workaround mcrypt's broken ncfb implementation in buffered mode
+            // see: {@link http://phpseclib.sourceforge.net/cfb-demo.phps}
+            if ($this->mode == CRYPT_MODE_CFB) {
+                $this->ecb = mcrypt_module_open($this->cipher_name_mcrypt, '', MCRYPT_MODE_ECB, '');
+            }
+
+        } // else should mcrypt_generic_deinit be called?
+
+        if ($this->mode == CRYPT_MODE_CFB) {
+            mcrypt_generic_init($this->ecb, $this->key, str_repeat("\0", $this->block_size));
+        }
+    }
+
+    /**
+     * Pads a string
+     *
+     * Pads a string using the RSA PKCS padding standards so that its length is a multiple of the blocksize.
+     * $this->block_size - (strlen($text) % $this->block_size) bytes are added, each of which is equal to
+     * chr($this->block_size - (strlen($text) % $this->block_size)
+     *
+     * If padding is disabled and $text is not a multiple of the blocksize, the string will be padded regardless
+     * and padding will, hence forth, be enabled.
+     *
+     * @see Crypt_Base::_unpad()
+     * @param String $text
+     * @access private
+     * @return String
+     */
+    function _pad($text)
+    {
+        $length = strlen($text);
+
+        if (!$this->padding) {
+            if ($length % $this->block_size == 0) {
+                return $text;
+            } else {
+                user_error("The plaintext's length ($length) is not a multiple of the block size ({$this->block_size})");
+                $this->padding = true;
+            }
+        }
+
+        $pad = $this->block_size - ($length % $this->block_size);
+
+        return str_pad($text, $length + $pad, chr($pad));
+    }
+
+    /**
+     * Unpads a string.
+     *
+     * If padding is enabled and the reported padding length is invalid the encryption key will be assumed to be wrong
+     * and false will be returned.
+     *
+     * @see Crypt_Base::_pad()
+     * @param String $text
+     * @access private
+     * @return String
+     */
+    function _unpad($text)
+    {
+        if (!$this->padding) {
+            return $text;
+        }
+
+        $length = ord($text[strlen($text) - 1]);
+
+        if (!$length || $length > $this->block_size) {
+            return false;
+        }
+
+        return substr($text, 0, -$length);
+    }
+
+    /**
+     * Clears internal buffers
+     *
+     * Clearing/resetting the internal buffers is done everytime
+     * after disableContinuousBuffer() or on cipher $engine (re)init
+     * ie after setKey() or setIV()
+     *
+     * Note: Could, but not must, extend by the child Crypt_* class
+     *
+     * @access public
+     */
+    function _clearBuffers()
+    {
+        $this->enbuffer = array('encrypted'  => '', 'xor' => '', 'pos' => 0, 'enmcrypt_init' => true);
+        $this->debuffer = array('ciphertext' => '', 'xor' => '', 'pos' => 0, 'demcrypt_init' => true);
+
+        // mcrypt's handling of invalid's $iv:
+        // $this->encryptIV = $this->decryptIV = strlen($this->iv) == $this->block_size ? $this->iv : str_repeat("\0", $this->block_size);
+        $this->encryptIV = $this->decryptIV = str_pad(substr($this->iv, 0, $this->block_size), $this->block_size, "\0");
+    }
+
+    /**
+     * String Shift
+     *
+     * Inspired by array_shift
+     *
+     * @param String $string
+     * @param optional Integer $index
+     * @access private
+     * @return String
+     */
+    function _stringShift(&$string, $index = 1)
+    {
+        $substr = substr($string, 0, $index);
+        $string = substr($string, $index);
+        return $substr;
+    }
+
+    /**
+     * Generate CTR XOR encryption key
+     *
+     * Encrypt the output of this and XOR it against the ciphertext / plaintext to get the
+     * plaintext / ciphertext in CTR mode.
+     *
+     * @see Crypt_Base::decrypt()
+     * @see Crypt_Base::encrypt()
+     * @param String $iv
+     * @param Integer $length
+     * @access private
+     * @return String $xor
+     */
+    function _generateXor(&$iv, $length)
+    {
+        $xor = '';
+        $block_size = $this->block_size;
+        $num_blocks = floor(($length + ($block_size - 1)) / $block_size);
+        for ($i = 0; $i < $num_blocks; $i++) {
+            $xor.= $iv;
+            for ($j = 4; $j <= $block_size; $j+= 4) {
+                $temp = substr($iv, -$j, 4);
+                switch ($temp) {
+                    case "\xFF\xFF\xFF\xFF":
+                        $iv = substr_replace($iv, "\x00\x00\x00\x00", -$j, 4);
+                        break;
+                    case "\x7F\xFF\xFF\xFF":
+                        $iv = substr_replace($iv, "\x80\x00\x00\x00", -$j, 4);
+                        break 2;
+                    default:
+                        extract(unpack('Ncount', $temp));
+                        $iv = substr_replace($iv, pack('N', $count + 1), -$j, 4);
+                        break 2;
+                }
+            }
+        }
+
+        return $xor;
+    }
+
+    /**
+     * Setup the performance-optimized function for de/encrypt()
+     *
+     * Stores the created (or existing) callback function-name
+     * in $this->inline_crypt
+     *
+     * Internally for phpseclib developers:
+     *
+     *     _setupInlineCrypt() would be called only if:
+     *
+     *     - $engine == CRYPT_MODE_INTERNAL and
+     *
+     *     - $use_inline_crypt === true
+     *
+     *     - each time on _setup(), after(!) _setupKey()
+     *
+     *
+     *     This ensures that _setupInlineCrypt() has always a
+     *     full ready2go initializated internal cipher $engine state
+     *     where, for example, the keys allready expanded,
+     *     keys/block_size calculated and such.
+     *
+     *     It is, each time if called, the responsibility of _setupInlineCrypt():
+     *
+     *     - to set $this->inline_crypt to a valid and fully working callback function
+     *       as a (faster) replacement for encrypt() / decrypt()
+     *
+     *     - NOT to create unlimited callback functions (for memory reasons!)
+     *       no matter how often _setupInlineCrypt() would be called. At some
+     *       point of amount they must be generic re-useable.
+     *
+     *     - the code of _setupInlineCrypt() it self,
+     *       and the generated callback code,
+     *       must be, in following order:
+     *       - 100% safe
+     *       - 100% compatible to encrypt()/decrypt()
+     *       - using only php5+ features/lang-constructs/php-extensions if
+     *         compatibility (down to php4) or fallback is provided
+     *       - readable/maintainable/understandable/commented and... not-cryptic-styled-code :-)
+     *       - >= 10% faster than encrypt()/decrypt() [which is, by the way,
+     *         the reason for the existence of _setupInlineCrypt() :-)]
+     *       - memory-nice
+     *       - short (as good as possible)
+     *
+     * Note: - _setupInlineCrypt() is using _createInlineCryptFunction() to create the full callback function code.
+     *       - In case of using inline crypting, _setupInlineCrypt() must extend by the child Crypt_* class.
+     *       - The following variable names are reserved:
+     *         - $_*  (all variable names prefixed with an underscore)
+     *         - $self (object reference to it self. Do not use $this, but $self instead)
+     *         - $in (the content of $in has to en/decrypt by the generated code)
+     *       - The callback function should not use the 'return' statement, but en/decrypt'ing the content of $in only
+     *
+     *
+     * @see Crypt_Base::_setup()
+     * @see Crypt_Base::_createInlineCryptFunction()
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @access private
+     */
+    function _setupInlineCrypt()
+    {
+        // If a Crypt_* class providing inline crypting it must extend _setupInlineCrypt()
+
+        // If, for any reason, an extending Crypt_Base() Crypt_* class
+        // not using inline crypting then it must be ensured that: $this->use_inline_crypt = false
+        // ie in the class var declaration of $use_inline_crypt in general for the Crypt_* class,
+        // in the constructor at object instance-time
+        // or, if it's runtime-specific, at runtime
+
+        $this->use_inline_crypt = false;
+    }
+
+    /**
+     * Creates the performance-optimized function for en/decrypt()
+     *
+     * Internally for phpseclib developers:
+     *
+     *    _createInlineCryptFunction():
+     *
+     *    - merge the $cipher_code [setup'ed by _setupInlineCrypt()]
+     *      with the current [$this->]mode of operation code
+     *
+     *    - create the $inline function, which called by encrypt() / decrypt()
+     *      as its replacement to speed up the en/decryption operations.
+     *
+     *    - return the name of the created $inline callback function
+     *
+     *    - used to speed up en/decryption
+     *
+     *
+     *
+     *    The main reason why can speed up things [up to 50%] this way are:
+     *
+     *    - using variables more effective then regular.
+     *      (ie no use of expensive arrays but integers $k_0, $k_1 ...
+     *      or even, for example, the pure $key[] values hardcoded)
+     *
+     *    - avoiding 1000's of function calls of ie _encryptBlock()
+     *      but inlining the crypt operations.
+     *      in the mode of operation for() loop.
+     *
+     *    - full loop unroll the (sometimes key-dependent) rounds
+     *      avoiding this way ++$i counters and runtime-if's etc...
+     *
+     *    The basic code architectur of the generated $inline en/decrypt()
+     *    lambda function, in pseudo php, is:
+     *
+     *    <code>
+     *    +----------------------------------------------------------------------------------------------+
+     *    | callback $inline = create_function:                                                          |
+     *    | lambda_function_0001_crypt_ECB($action, $text)                                               |
+     *    | {                                                                                            |
+     *    |     INSERT PHP CODE OF:                                                                      |
+     *    |     $cipher_code['init_crypt'];                  // general init code.                       |
+     *    |                                                  // ie: $sbox'es declarations used for       |
+     *    |                                                  //     encrypt and decrypt'ing.             |
+     *    |                                                                                              |
+     *    |     switch ($action) {                                                                       |
+     *    |         case 'encrypt':                                                                      |
+     *    |             INSERT PHP CODE OF:                                                              |
+     *    |             $cipher_code['init_encrypt'];       // encrypt sepcific init code.               |
+     *    |                                                    ie: specified $key or $box                |
+     *    |                                                        declarations for encrypt'ing.         |
+     *    |                                                                                              |
+     *    |             foreach ($ciphertext) {                                                          |
+     *    |                 $in = $block_size of $ciphertext;                                            |
+     *    |                                                                                              |
+     *    |                 INSERT PHP CODE OF:                                                          |
+     *    |                 $cipher_code['encrypt_block'];  // encrypt's (string) $in, which is always:  |
+     *    |                                                 // strlen($in) == $this->block_size          |
+     *    |                                                 // here comes the cipher algorithm in action |
+     *    |                                                 // for encryption.                           |
+     *    |                                                 // $cipher_code['encrypt_block'] has to      |
+     *    |                                                 // encrypt the content of the $in variable   |
+     *    |                                                                                              |
+     *    |                 $plaintext .= $in;                                                           |
+     *    |             }                                                                                |
+     *    |             return $plaintext;                                                               |
+     *    |                                                                                              |
+     *    |         case 'decrypt':                                                                      |
+     *    |             INSERT PHP CODE OF:                                                              |
+     *    |             $cipher_code['init_decrypt'];       // decrypt sepcific init code                |
+     *    |                                                    ie: specified $key or $box                |
+     *    |                                                        declarations for decrypt'ing.         |
+     *    |             foreach ($plaintext) {                                                           |
+     *    |                 $in = $block_size of $plaintext;                                             |
+     *    |                                                                                              |
+     *    |                 INSERT PHP CODE OF:                                                          |
+     *    |                 $cipher_code['decrypt_block'];  // decrypt's (string) $in, which is always   |
+     *    |                                                 // strlen($in) == $this->block_size          |
+     *    |                                                 // here comes the cipher algorithm in action |
+     *    |                                                 // for decryption.                           |
+     *    |                                                 // $cipher_code['decrypt_block'] has to      |
+     *    |                                                 // decrypt the content of the $in variable   |
+     *    |                 $ciphertext .= $in;                                                          |
+     *    |             }                                                                                |
+     *    |             return $ciphertext;                                                              |
+     *    |     }                                                                                        |
+     *    | }                                                                                            |
+     *    +----------------------------------------------------------------------------------------------+
+     *    </code>
+     *
+     *    See also the Crypt_*::_setupInlineCrypt()'s for
+     *    productive inline $cipher_code's how they works.
+     *
+     *    Structure of:
+     *    <code>
+     *    $cipher_code = array(
+     *        'init_crypt'    => (string) '', // optional
+     *        'init_encrypt'  => (string) '', // optional
+     *        'init_decrypt'  => (string) '', // optional
+     *        'encrypt_block' => (string) '', // required
+     *        'decrypt_block' => (string) ''  // required
+     *    );
+     *    </code>
+     *
+     * @see Crypt_Base::_setupInlineCrypt()
+     * @see Crypt_Base::encrypt()
+     * @see Crypt_Base::decrypt()
+     * @param Array $cipher_code
+     * @access private
+     * @return String (the name of the created callback function)
+     */
+    function _createInlineCryptFunction($cipher_code)
+    {
+        $block_size = $this->block_size;
+
+        // optional
+        $init_crypt    = isset($cipher_code['init_crypt'])    ? $cipher_code['init_crypt']    : '';
+        $init_encrypt  = isset($cipher_code['init_encrypt'])  ? $cipher_code['init_encrypt']  : '';
+        $init_decrypt  = isset($cipher_code['init_decrypt'])  ? $cipher_code['init_decrypt']  : '';
+        // required
+        $encrypt_block = $cipher_code['encrypt_block'];
+        $decrypt_block = $cipher_code['decrypt_block'];
+
+        // Generating mode of operation inline code,
+        // merged with the $cipher_code algorithm
+        // for encrypt- and decryption.
+        switch ($this->mode) {
+            case CRYPT_MODE_ECB:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    $_text = $self->_pad($_text);
+                    $_plaintext_len = strlen($_text);
+
+                    for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                        $in = substr($_text, $_i, '.$block_size.');
+                        '.$encrypt_block.'
+                        $_ciphertext.= $in;
+                    }
+
+                    return $_ciphertext;
+                    ';
+
+                $decrypt = $init_decrypt . '
+                    $_plaintext = "";
+                    $_text = str_pad($_text, strlen($_text) + ('.$block_size.' - strlen($_text) % '.$block_size.') % '.$block_size.', chr(0));
+                    $_ciphertext_len = strlen($_text);
+
+                    for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                        $in = substr($_text, $_i, '.$block_size.');
+                        '.$decrypt_block.'
+                        $_plaintext.= $in;
+                    }
+
+                    return $self->_unpad($_plaintext);
+                    ';
+                break;
+            case CRYPT_MODE_CTR:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    $_plaintext_len = strlen($_text);
+                    $_xor = $self->encryptIV;
+                    $_buffer = &$self->enbuffer;
+
+                    if (strlen($_buffer["encrypted"])) {
+                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            if (strlen($_block) > strlen($_buffer["encrypted"])) {
+                                $in = $self->_generateXor($_xor, '.$block_size.');
+                                '.$encrypt_block.'
+                                $_buffer["encrypted"].= $in;
+                            }
+                            $_key = $self->_stringShift($_buffer["encrypted"], '.$block_size.');
+                            $_ciphertext.= $_block ^ $_key;
+                        }
+                    } else {
+                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            $in = $self->_generateXor($_xor, '.$block_size.');
+                            '.$encrypt_block.'
+                            $_key = $in;
+                            $_ciphertext.= $_block ^ $_key;
+                        }
+                    }
+                    if ($self->continuousBuffer) {
+                        $self->encryptIV = $_xor;
+                        if ($_start = $_plaintext_len % '.$block_size.') {
+                            $_buffer["encrypted"] = substr($_key, $_start) . $_buffer["encrypted"];
+                        }
+                    }
+
+                    return $_ciphertext;
+                ';
+
+                $decrypt = $init_encrypt . '
+                    $_plaintext = "";
+                    $_ciphertext_len = strlen($_text);
+                    $_xor = $self->decryptIV;
+                    $_buffer = &$self->debuffer;
+
+                    if (strlen($_buffer["ciphertext"])) {
+                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            if (strlen($_block) > strlen($_buffer["ciphertext"])) {
+                                $in = $self->_generateXor($_xor, '.$block_size.');
+                                '.$encrypt_block.'
+                                $_buffer["ciphertext"].= $in;
+                            }
+                            $_key = $self->_stringShift($_buffer["ciphertext"], '.$block_size.');
+                            $_plaintext.= $_block ^ $_key;
+                        }
+                    } else {
+                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            $in = $self->_generateXor($_xor, '.$block_size.');
+                            '.$encrypt_block.'
+                            $_key = $in;
+                            $_plaintext.= $_block ^ $_key;
+                        }
+                    }
+                    if ($self->continuousBuffer) {
+                        $self->decryptIV = $_xor;
+                        if ($_start = $_ciphertext_len % '.$block_size.') {
+                            $_buffer["ciphertext"] = substr($_key, $_start) . $_buffer["ciphertext"];
+                        }
+                    }
+
+                    return $_plaintext;
+                    ';
+                break;
+            case CRYPT_MODE_CFB:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    $_buffer = &$self->enbuffer;
+
+                    if ($self->continuousBuffer) {
+                        $_iv = &$self->encryptIV;
+                        $_pos = &$_buffer["pos"];
+                    } else {
+                        $_iv = $self->encryptIV;
+                        $_pos = 0;
+                    }
+                    $_len = strlen($_text);
+                    $_i = 0;
+                    if ($_pos) {
+                        $_orig_pos = $_pos;
+                        $_max = '.$block_size.' - $_pos;
+                        if ($_len >= $_max) {
+                            $_i = $_max;
+                            $_len-= $_max;
+                            $_pos = 0;
+                        } else {
+                            $_i = $_len;
+                            $_pos+= $_len;
+                            $_len = 0;
+                        }
+                        $_ciphertext = substr($_iv, $_orig_pos) ^ $_text;
+                        $_iv = substr_replace($_iv, $_ciphertext, $_orig_pos, $_i);
+                    }
+                    while ($_len >= '.$block_size.') {
+                        $in = $_iv;
+                        '.$encrypt_block.';
+                        $_iv = $in ^ substr($_text, $_i, '.$block_size.');
+                        $_ciphertext.= $_iv;
+                        $_len-= '.$block_size.';
+                        $_i+= '.$block_size.';
+                    }
+                    if ($_len) {
+                        $in = $_iv;
+                        '.$encrypt_block.'
+                        $_iv = $in;
+                        $_block = $_iv ^ substr($_text, $_i);
+                        $_iv = substr_replace($_iv, $_block, 0, $_len);
+                        $_ciphertext.= $_block;
+                        $_pos = $_len;
+                    }
+                    return $_ciphertext;
+                ';
+
+                $decrypt = $init_encrypt . '
+                    $_plaintext = "";
+                    $_buffer = &$self->debuffer;
+
+                    if ($self->continuousBuffer) {
+                        $_iv = &$self->decryptIV;
+                        $_pos = &$_buffer["pos"];
+                    } else {
+                        $_iv = $self->decryptIV;
+                        $_pos = 0;
+                    }
+                    $_len = strlen($_text);
+                    $_i = 0;
+                    if ($_pos) {
+                        $_orig_pos = $_pos;
+                        $_max = '.$block_size.' - $_pos;
+                        if ($_len >= $_max) {
+                            $_i = $_max;
+                            $_len-= $_max;
+                            $_pos = 0;
+                        } else {
+                            $_i = $_len;
+                            $_pos+= $_len;
+                            $_len = 0;
+                        }
+                        $_plaintext = substr($_iv, $_orig_pos) ^ $_text;
+                        $_iv = substr_replace($_iv, substr($_text, 0, $_i), $_orig_pos, $_i);
+                    }
+                    while ($_len >= '.$block_size.') {
+                        $in = $_iv;
+                        '.$encrypt_block.'
+                        $_iv = $in;
+                        $cb = substr($_text, $_i, '.$block_size.');
+                        $_plaintext.= $_iv ^ $cb;
+                        $_iv = $cb;
+                        $_len-= '.$block_size.';
+                        $_i+= '.$block_size.';
+                    }
+                    if ($_len) {
+                        $in = $_iv;
+                        '.$encrypt_block.'
+                        $_iv = $in;
+                        $_plaintext.= $_iv ^ substr($_text, $_i);
+                        $_iv = substr_replace($_iv, substr($_text, $_i), 0, $_len);
+                        $_pos = $_len;
+                    }
+
+                    return $_plaintext;
+                    ';
+                break;
+            case CRYPT_MODE_OFB:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    $_plaintext_len = strlen($_text);
+                    $_xor = $self->encryptIV;
+                    $_buffer = &$self->enbuffer;
+
+                    if (strlen($_buffer["xor"])) {
+                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            if (strlen($_block) > strlen($_buffer["xor"])) {
+                                $in = $_xor;
+                                '.$encrypt_block.'
+                                $_xor = $in;
+                                $_buffer["xor"].= $_xor;
+                            }
+                            $_key = $self->_stringShift($_buffer["xor"], '.$block_size.');
+                            $_ciphertext.= $_block ^ $_key;
+                        }
+                    } else {
+                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                            $in = $_xor;
+                            '.$encrypt_block.'
+                            $_xor = $in;
+                            $_ciphertext.= substr($_text, $_i, '.$block_size.') ^ $_xor;
+                        }
+                        $_key = $_xor;
+                    }
+                    if ($self->continuousBuffer) {
+                        $self->encryptIV = $_xor;
+                        if ($_start = $_plaintext_len % '.$block_size.') {
+                             $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
+                        }
+                    }
+                    return $_ciphertext;
+                    ';
+
+                $decrypt = $init_encrypt . '
+                    $_plaintext = "";
+                    $_ciphertext_len = strlen($_text);
+                    $_xor = $self->decryptIV;
+                    $_buffer = &$self->debuffer;
+
+                    if (strlen($_buffer["xor"])) {
+                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                            $_block = substr($_text, $_i, '.$block_size.');
+                            if (strlen($_block) > strlen($_buffer["xor"])) {
+                                $in = $_xor;
+                                '.$encrypt_block.'
+                                $_xor = $in;
+                                $_buffer["xor"].= $_xor;
+                            }
+                            $_key = $self->_stringShift($_buffer["xor"], '.$block_size.');
+                            $_plaintext.= $_block ^ $_key;
+                        }
+                    } else {
+                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                            $in = $_xor;
+                            '.$encrypt_block.'
+                            $_xor = $in;
+                            $_plaintext.= substr($_text, $_i, '.$block_size.') ^ $_xor;
+                        }
+                        $_key = $_xor;
+                    }
+                    if ($self->continuousBuffer) {
+                        $self->decryptIV = $_xor;
+                        if ($_start = $_ciphertext_len % '.$block_size.') {
+                             $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
+                        }
+                    }
+                    return $_plaintext;
+                    ';
+                break;
+            case CRYPT_MODE_STREAM:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    '.$encrypt_block.'
+                    return $_ciphertext;
+                    ';
+                $decrypt = $init_decrypt . '
+                    $_plaintext = "";
+                    '.$decrypt_block.'
+                    return $_plaintext;
+                    ';
+                break;
+            // case CRYPT_MODE_CBC:
+            default:
+                $encrypt = $init_encrypt . '
+                    $_ciphertext = "";
+                    $_text = $self->_pad($_text);
+                    $_plaintext_len = strlen($_text);
+
+                    $in = $self->encryptIV;
+
+                    for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
+                        $in = substr($_text, $_i, '.$block_size.') ^ $in;
+                        '.$encrypt_block.'
+                        $_ciphertext.= $in;
+                    }
+
+                    if ($self->continuousBuffer) {
+                        $self->encryptIV = $in;
+                    }
+
+                    return $_ciphertext;
+                    ';
+
+                $decrypt = $init_decrypt . '
+                    $_plaintext = "";
+                    $_text = str_pad($_text, strlen($_text) + ('.$block_size.' - strlen($_text) % '.$block_size.') % '.$block_size.', chr(0));
+                    $_ciphertext_len = strlen($_text);
+
+                    $_iv = $self->decryptIV;
+
+                    for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
+                        $in = $_block = substr($_text, $_i, '.$block_size.');
+                        '.$decrypt_block.'
+                        $_plaintext.= $in ^ $_iv;
+                        $_iv = $_block;
+                    }
+
+                    if ($self->continuousBuffer) {
+                        $self->decryptIV = $_iv;
+                    }
+
+                    return $self->_unpad($_plaintext);
+                    ';
+                break;
+        }
+
+        // Create the $inline function and return its name as string. Ready to run!
+        return create_function('$_action, &$self, $_text', $init_crypt . 'if ($_action == "encrypt") { ' . $encrypt . ' } else { ' . $decrypt . ' }');
+    }
+
+    /**
+     * Holds the lambda_functions table (classwide)
+     *
+     * Each name of the lambda function, created from
+     * _setupInlineCrypt() && _createInlineCryptFunction()
+     * is stored, classwide (!), here for reusing.
+     *
+     * The string-based index of $function is a classwide
+     * uniqe value representing, at least, the $mode of
+     * operation (or more... depends of the optimizing level)
+     * for which $mode the lambda function was created.
+     *
+     * @access private
+     * @return &Array
+     */
+    function &_getLambdaFunctions()
+    {
+        static $functions = array();
+        return $functions;
+    }
+}