simplecov 0.15.1 → 0.18.0.beta3

data/features/merging_test_unit_and_rspec.feature

@@ -1,44 +0,0 @@
-@test_unit @rspec @merging
-Feature:
-
-  Test suites like RSpec and Test/Unit should be merged automatically
-  when both have been run recently. The coverage report will feature
-  the joined results of all test suites that are using SimpleCov.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        add_filter 'spec.rb'
-      end
-      """
-    And SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        add_filter 'spec.rb'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then the report should be based upon:
-      | Unit Tests |
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then the report should be based upon:
-      | RSpec      |
-      | Unit Tests |
-
-    And I should see the groups:
-      | name      | coverage | files |
-      | All Files | 90.48%   | 4     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         |  80.0 %  |
-      | lib/faked_project/framework_specific.rb |  87.5 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/features/minimum_coverage.feature

@@ -1,59 +0,0 @@
-@test_unit @config
-Feature:
-
-  Exit code should be non-zero if the overall coverage is below the
-  minimum_coverage threshold.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        minimum_coverage 90
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should not be 0
-    And the output should contain "Coverage (88.10%) is below the expected minimum coverage (90.00%)."
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        minimum_coverage 88.11
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should not be 0
-    And the output should contain "Coverage (88.10%) is below the expected minimum coverage (88.11%)."
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        minimum_coverage 88.10
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should be 0
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should be 0
-

data/features/refuse_coverage_drop.feature

@@ -1,95 +0,0 @@
-@test_unit @config
-Feature:
-
-  Exit code should be non-zero if the overall coverage decreases.
-  And last_run file should not be overwritten with new coverage value.
-
-  Scenario: refuse_coverage_drop configured
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-        refuse_coverage_drop
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should be 0
-    And a file named "coverage/.last_run.json" should exist
-    And the file "coverage/.last_run.json" should contain:
-      """
-      {
-        "result": {
-          "covered_percent": 88.1
-        }
-      }
-      """
-
-    Given a file named "lib/faked_project/missed.rb" with:
-      """
-      class UncoveredSourceCode
-        def foo
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should not be 0
-    And the output should contain "Coverage has dropped by 3.32% since the last time (maximum allowed: 0.00%)."
-    And a file named "coverage/.last_run.json" should exist
-    And the file "coverage/.last_run.json" should contain:
-      """
-      {
-        "result": {
-          "covered_percent": 88.1
-        }
-      }
-      """
-
-  Scenario: refuse_coverage_drop not configured updates resultset
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_filter 'test.rb'
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should be 0
-    And a file named "coverage/.last_run.json" should exist
-    And the file "coverage/.last_run.json" should contain:
-      """
-      {
-        "result": {
-          "covered_percent": 88.1
-        }
-      }
-      """
-
-    Given a file named "lib/faked_project/missed.rb" with:
-      """
-      class UncoveredSourceCode
-        def foo
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-      end
-      """
-
-    When I run `bundle exec rake test`
-    Then the exit status should be 0
-    And a file named "coverage/.last_run.json" should exist
-    And the file "coverage/.last_run.json" should contain:
-      """
-      {
-        "result": {
-          "covered_percent": 84.78
-        }
-      }
-      """

data/features/rspec_basic.feature

@@ -1,32 +0,0 @@
-@rspec
-Feature:
-
-  Simply adding the basic simplecov lines to a project should get
-  the user a coverage report after running `rspec`
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 91.8%   | 7     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | spec/forking_spec.rb                    | 100.0 %  |
-      | spec/meta_magic_spec.rb                 | 100.0 %  |
-      | spec/some_class_spec.rb                 | 100.0 %  |
-
-      # Note: faked_spec.rb is not appearing here since that's the first unit test file
-      # loaded by Rake, and only there test_helper is required, which then loads simplecov
-      # and triggers tracking of all other loaded files! Solution for this would be to
-      # configure simplecov in this first test instead of test_helper.

data/features/rspec_fails_on_initialization.feature

@@ -1,14 +0,0 @@
-@rspec
-Feature:
-
-  Running specs with a failing rspec setup
-
-  Scenario: Fail if rspec fails before starting its tests
-    Given a file named "spec/spec_helper.rb" with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      raise "some exception in the class loading before the tests start"
-      """
-    When I run `bundle exec rspec spec`
-    Then the exit status should not be 0

data/features/rspec_groups_and_filters_basic.feature

@@ -1,29 +0,0 @@
-@rspec
-Feature:
-
-  Defining some groups and filters should give a corresponding
-  coverage report that respects those settings after running rspec
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-        add_filter '/spec/'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    And I should see the groups:
-      | name      | coverage | files |
-      | All Files | 88.1%    | 4     |
-      | Libs      | 86.11%   | 3     |
-      | Ungrouped | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %  |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/features/rspec_groups_and_filters_complex.feature

@@ -1,37 +0,0 @@
-@rspec
-Feature: Sophisticated grouping and filtering on RSpec
-
-  Defining groups and filters can be done by passing blocks or strings.
-  Blocks get each SimpleCov::SourceFile instance passed an can use arbitrary
-  and potentially weird conditions to remove files from the report or add them
-  to specific groups.
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'By block' do |src_file|
-          src_file.filename =~ /MaGiC/i
-        end
-        add_group 'By string', 'project/meta_magic'
-        add_group 'By array', ['project/meta_magic']
-
-        add_filter 'faked_project.rb'
-        # Remove all files that include "describe" in their source
-        add_filter {|src_file| src_file.lines.any? {|line| line.src =~ /describe/ } }
-        add_filter {|src_file| src_file.covered_percent < 100 }
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 100.0%   | 1     |
-      | By block  | 100.0%   | 1     |
-      | By string | 100.0%   | 1     |
-      | By array  | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                            | coverage |
-      | lib/faked_project/meta_magic.rb | 100.0 %  |

data/features/rspec_groups_using_filter_class.feature

@@ -1,41 +0,0 @@
-@rspec
-Feature: Grouping on RSpec using a custom filter class
-
-  Next to passing a block or a string to define a group, you can also pass
-  a filter class. The filter class inherits from SimpleCov::Filter and
-  must implement the matches? method, which is used to determine whether
-  or not a file should be added to the group.
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      class CoverageFilter < SimpleCov::Filter
-        def matches?(source_file)
-          source_file.covered_percent < filter_argument
-        end
-      end
-      SimpleCov.start do
-        add_group 'By filter class', CoverageFilter.new(90)
-        add_group 'By string', 'project/meta_magic'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name             | coverage | files |
-      | All Files        | 91.8%    | 7     |
-      | By filter class  | 78.26%   | 2     |
-      | By string        | 100.0%   | 1     |
-      | Ungrouped        | 100.0%   | 4     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | spec/forking_spec.rb                    | 100.0 %  |
-      | spec/meta_magic_spec.rb                 | 100.0 %  |
-      | spec/some_class_spec.rb                 | 100.0 %  |
-

data/features/rspec_without_simplecov.feature

@@ -1,20 +0,0 @@
-@rspec
-Feature:
-
-  Running specs without simplecov configuration
-
-  Scenario: No config at all
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated
-
-  Scenario: Configured, but not started
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.configure do
-        add_filter 'somefilter'
-      end
-      """
-
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated

data/features/skipping_code_blocks_manually.feature

@@ -1,70 +0,0 @@
-@test_unit @nocov
-Feature:
-
-  When code is wrapped in :nocov: comment blocks, it does not count
-  against the coverage numbers.
-
-  Background:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks'
-      """
-
-  Scenario: Plain run with a nocov'd method
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-        #:nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-        #:nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 7 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Number of spaces should not mix up nocov results
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-           #    :nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-          #   :nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 7 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |