simplecov 0.15.1 → 0.18.0.beta3

data/doc/alternate-formatters.md

@@ -10,6 +10,11 @@ If you have built or found one that is missing here, please send a Pull Request
 
 A formatter that generates a coverage badge for use in your project's readme using ImageMagick.
 
+#### [simplecov-small-badge](https://github.com/marcgrimme/simplecov-small-badge)
+*by Marc Grimme*
+
+A formatter that generates a small coverage badge for use in your project's readme using the SVG.
+
 #### [simplecov-cobertura](https://github.com/dashingrocket/simplecov-cobertura)
 *by Jesse Bowes*
 
@@ -20,11 +25,21 @@ A formatter that generates Cobertura XML.
 
 CSV formatter for SimpleCov
 
+#### [simplecov-erb](https://github.com/kpaulisse/simplecov-erb)
+*by [Kevin Paulisse](https://github.com/kpaulisse)*
+
+Flexible formatter that generates the output from an ERB template.
+
 #### [simplecov-json](https://github.com/vicentllongo/simplecov-json)
 *by Vicent Llongo*
 
 JSON formatter for SimpleCov
 
+#### [simplecov-lcov](https://github.com/fortissimo1997/simplecov-lcov)
+*by fortissimo1997*
+
+lcov formatter for SimpleCov
+
 #### [simplecov-rcov](https://github.com/fguillen/simplecov-rcov)
 *by Fernando Guillen*
 
@@ -39,3 +54,8 @@ A formatter that prints the coverage of the file under test when you run a singl
 *by [Yosuke Kabuto](https://github.com/ysksn)*
 
 t_wada AA formatter for SimpleCov
+
+#### [simplecov-material(https://github.com/chiefpansancolt/simplecov-material)
+*by [Chiefpansancolt](https://github.com/chiefpansancolt)*
+
+A Material Designed HTML formatter with clean and easy search of files with a tabular left Navigation.

data/lib/simplecov.rb

@@ -1,6 +1,7 @@
-#
-# Code coverage for ruby 1.9. Please check out README for a full introduction.
-#
+# frozen_string_literal: true
+
+require "English"
+
 # Coverage may be inaccurate under JRUBY.
 if defined?(JRUBY_VERSION) && defined?(JRuby)
 
@@ -16,10 +17,15 @@ if defined?(JRUBY_VERSION) && defined?(JRuby)
       ' or set the "debug.fullTrace=true" option in your .jrubyrc'
   end
 end
+
+#
+# Code coverage for ruby. Please check out README for a full introduction.
+#
 module SimpleCov
   class << self
     attr_accessor :running
     attr_accessor :pid
+    attr_reader :exit_exception
 
     #
     # Sets up SimpleCov to run against your project.
@@ -39,35 +45,49 @@ module SimpleCov
     # Please check out the RDoc for SimpleCov::Configuration to find about available config options
     #
     def start(profile = nil, &block)
-      if SimpleCov.usable?
-        load_profile(profile) if profile
-        configure(&block) if block_given?
-        @result = nil
-        self.running = true
-        self.pid = Process.pid
-        Coverage.start
-      else
-        warn "WARNING: SimpleCov is activated, but you're not running Ruby 1.9+ - no coverage analysis will happen"
-        warn "Starting with SimpleCov 1.0.0, even no-op compatibility with Ruby <= 1.8 will be entirely dropped."
-        false
-      end
+      require "coverage"
+      initial_setup(profile, &block)
+      @result = nil
+      self.pid = Process.pid
+
+      start_coverage_measurement
     end
 
     #
-    # Finds files that were to be tracked but were not loaded and initializes
-    # the line-by-line coverage to zero (if relevant) or nil (comments / whitespace etc).
+    # Collate a series of SimpleCov result files into a single SimpleCov output.
+    # You can optionally specify configuration with a block:
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"]
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' # using rails profile
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"] do
+    #     add_filter 'test'
+    #   end
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' do
+    #     add_filter 'test'
+    #   end
     #
-    def add_not_loaded_files(result)
-      if tracked_files
-        result = result.dup
-        Dir[tracked_files].each do |file|
-          absolute = File.expand_path(file)
+    # Please check out the RDoc for SimpleCov::Configuration to find about
+    # available config options, or checkout the README for more in-depth
+    # information about coverage collation
+    #
+    def collate(result_filenames, profile = nil, &block)
+      raise "There's no reports to be merged" if result_filenames.empty?
 
-          result[absolute] ||= LinesClassifier.new.classify(File.foreach(absolute))
+      initial_setup(profile, &block)
+
+      results = result_filenames.flat_map do |filename|
+        # Re-create each included instance of SimpleCov::Result from the stored run data.
+        (JSON.parse(File.read(filename)) || {}).map do |command_name, coverage|
+          SimpleCov::Result.from_hash(command_name => coverage)
         end
       end
 
-      result
+      # Use the ResultMerger to produce a single, merged result, ready to use.
+      @result = SimpleCov::ResultMerger.merge_and_store(*results)
+
+      run_exit_tasks!
     end
 
     #
@@ -78,13 +98,13 @@ module SimpleCov
       return @result if result?
 
       # Collect our coverage result
-      if running
-        @result = SimpleCov::Result.new add_not_loaded_files(Coverage.result)
-      end
+
+      process_coverage_result if running
 
       # If we're using merging of results, store the current result
       # first (if there is one), then merge the results and return those
       if use_merging
+        wait_for_other_processes
         SimpleCov::ResultMerger.store_result(@result) if result?
         @result = SimpleCov::ResultMerger.merged_result
       end
@@ -142,35 +162,264 @@ module SimpleCov
     end
 
     #
-    # Checks whether we're on a proper version of Ruby (likely 1.9+) which
-    # provides coverage support
+    # Clear out the previously cached .result. Primarily useful in testing
     #
-    def usable?
-      return @usable if defined?(@usable) && !@usable.nil?
+    def clear_result
+      @result = nil
+    end
+
+    #
+    # Capture the current exception if it exists
+    # This will get called inside the at_exit block
+    #
+    def set_exit_exception
+      @exit_exception = $ERROR_INFO
+    end
+
+    #
+    # Returns the exit status from the exit exception
+    #
+    def exit_status_from_exception
+      return SimpleCov::ExitCodes::SUCCESS unless exit_exception
 
-      @usable = begin
-        require "coverage"
-        require "simplecov/jruby_fix"
-        true
-      rescue LoadError
-        false
+      if exit_exception.is_a?(SystemExit)
+        exit_exception.status
+      else
+        SimpleCov::ExitCodes::EXCEPTION
       end
     end
 
+    # @api private
     #
-    # Clear out the previously cached .result. Primarily useful in testing
+    # Called from at_exit block
     #
-    def clear_result
-      @result = nil
+    def run_exit_tasks!
+      set_exit_exception
+
+      exit_status = SimpleCov.exit_status_from_exception
+
+      SimpleCov.at_exit.call
+
+      # Don't modify the exit status unless the result has already been
+      # computed
+      exit_status = SimpleCov.process_result(SimpleCov.result, exit_status) if SimpleCov.result?
+
+      # Force exit with stored status (see github issue #5)
+      # unless it's nil or 0 (see github issue #281)
+      if exit_status&.positive?
+        $stderr.printf("SimpleCov failed with exit %<exit_status>d\n", exit_status: exit_status) if print_error_status
+        Kernel.exit exit_status
+      end
+    end
+
+    # @api private
+    #
+    # Usage:
+    #   exit_status = SimpleCov.process_result(SimpleCov.result, exit_status)
+    #
+    def process_result(result, exit_status)
+      return exit_status if exit_status != SimpleCov::ExitCodes::SUCCESS # Existing errors
+
+      covered_percent = result.covered_percent.floor(2)
+      result_exit_status = result_exit_status(result, covered_percent)
+      write_last_run(covered_percent) if result_exit_status == SimpleCov::ExitCodes::SUCCESS # No result errors
+      final_result_process? ? result_exit_status : SimpleCov::ExitCodes::SUCCESS
+    end
+
+    # @api private
+    #
+    # rubocop:disable Metrics/MethodLength
+    def result_exit_status(result, covered_percent)
+      covered_percentages = result.covered_percentages.map { |percentage| percentage.floor(2) }
+      if covered_percent < SimpleCov.minimum_coverage
+        $stderr.printf(
+          "Coverage (%<covered>.2f%%) is below the expected minimum coverage (%<minimum_coverage>.2f%%).\n",
+          covered: covered_percent,
+          minimum_coverage: SimpleCov.minimum_coverage
+        )
+        SimpleCov::ExitCodes::MINIMUM_COVERAGE
+      elsif covered_percentages.any? { |p| p < SimpleCov.minimum_coverage_by_file }
+        $stderr.printf(
+          "File (%<file>s) is only (%<least_covered_percentage>.2f%%) covered. This is below the expected minimum coverage per file of (%<min_coverage>.2f%%).\n",
+          file: result.least_covered_file,
+          least_covered_percentage: covered_percentages.min,
+          min_coverage: SimpleCov.minimum_coverage_by_file
+        )
+        SimpleCov::ExitCodes::MINIMUM_COVERAGE
+      elsif (last_run = SimpleCov::LastRun.read)
+        coverage_diff = last_run[:result][:covered_percent] - covered_percent
+        if coverage_diff > SimpleCov.maximum_coverage_drop
+          $stderr.printf(
+            "Coverage has dropped by %<drop_percent>.2f%% since the last time (maximum allowed: %<max_drop>.2f%%).\n",
+            drop_percent: coverage_diff,
+            max_drop: SimpleCov.maximum_coverage_drop
+          )
+          SimpleCov::ExitCodes::MAXIMUM_COVERAGE_DROP
+        else
+          SimpleCov::ExitCodes::SUCCESS
+        end
+      else
+        SimpleCov::ExitCodes::SUCCESS
+      end
+    end
+    # rubocop:enable Metrics/MethodLength
+
+    #
+    # @api private
+    #
+    def final_result_process?
+      # checking for ENV["TEST_ENV_NUMBER"] to determine if the tess are being run in parallel
+      !defined?(ParallelTests) || !ENV["TEST_ENV_NUMBER"] || ParallelTests.number_of_running_processes <= 1
+    end
+
+    #
+    # @api private
+    #
+    def wait_for_other_processes
+      return unless defined?(ParallelTests) && final_result_process?
+
+      ParallelTests.wait_for_other_processes_to_finish
+    end
+
+    #
+    # @api private
+    #
+    def write_last_run(covered_percent)
+      SimpleCov::LastRun.write(result: {covered_percent: covered_percent})
+    end
+
+  private
+
+    def initial_setup(profile, &block)
+      load_profile(profile) if profile
+      configure(&block) if block_given?
+      self.running = true
+    end
+
+    #
+    # Trigger Coverage.start depends on given config coverage_criterion
+    #
+    # With Positive branch it supports all coverage measurement types
+    # With Negative branch it supports only line coverage measurement type
+    #
+    def start_coverage_measurement
+      # This blog post gives a good run down of the coverage criterias introduced
+      # in Ruby 2.5: https://blog.bigbinary.com/2018/04/11/ruby-2-5-supports-measuring-branch-and-method-coverages.html
+      # There is also a nice writeup of the different coverage criteria made in this
+      # comment  https://github.com/colszowka/simplecov/pull/692#discussion_r281836176 :
+      # Ruby < 2.5:
+      # https://github.com/ruby/ruby/blob/v1_9_3_374/ext/coverage/coverage.c
+      # traditional mode (Array)
+      #
+      # Ruby 2.5:
+      # https://bugs.ruby-lang.org/issues/13901
+      # https://github.com/ruby/ruby/blob/v2_5_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :all - same as lines + branches + methods
+      #
+      # Ruby >= 2.6:
+      # https://bugs.ruby-lang.org/issues/15022
+      # https://github.com/ruby/ruby/blob/v2_6_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :oneshot_lines - can not be combined with lines
+      # :all - same as lines + branches + methods
+      #
+      if coverage_start_arguments_supported?
+        start_coverage_with_criteria
+      else
+        Coverage.start
+      end
+    end
+
+    def start_coverage_with_criteria
+      start_arguments = coverage_criteria.map do |criterion|
+        [lookup_corresponding_ruby_coverage_name(criterion), true]
+      end.to_h
+
+      Coverage.start(start_arguments)
+    end
+
+    CRITERION_TO_RUBY_COVERAGE = {
+      branch: :branches,
+      line: :lines
+    }.freeze
+    def lookup_corresponding_ruby_coverage_name(criterion)
+      CRITERION_TO_RUBY_COVERAGE.fetch(criterion)
+    end
+
+    #
+    # Finds files that were to be tracked but were not loaded and initializes
+    # the line-by-line coverage to zero (if relevant) or nil (comments / whitespace etc).
+    #
+    def add_not_loaded_files(result)
+      if tracked_files
+        result = result.dup
+        Dir[tracked_files].each do |file|
+          absolute_path = File.expand_path(file)
+          result[absolute_path] ||= SimulateCoverage.call(absolute_path)
+        end
+      end
+
+      result
+    end
+
+    #
+    # Call steps that handle process coverage result
+    #
+    # @return [Hash]
+    #
+    def process_coverage_result
+      adapt_coverage_result
+      remove_useless_results
+      result_with_not_loaded_files
+    end
+
+    #
+    # Unite the result so it wouldn't matter what coverage type was called
+    #
+    # @return [Hash]
+    #
+    def adapt_coverage_result
+      @result = SimpleCov::ResultAdapter.call(Coverage.result)
+    end
+
+    #
+    # Filter coverage result
+    # The result before filter also has result of coverage for files
+    # are not related to the project like loaded gems coverage.
+    #
+    # @return [Hash]
+    #
+    def remove_useless_results
+      @result = SimpleCov::UselessResultsRemover.call(@result)
+    end
+
+    #
+    # Initialize result with files that are not included by coverage
+    # and added inside the config block
+    #
+    # @return [Hash]
+    #
+    def result_with_not_loaded_files
+      @result = SimpleCov::Result.new(add_not_loaded_files(@result))
     end
   end
 end
 
 $LOAD_PATH.unshift(File.join(File.dirname(__FILE__)))
+require "set"
 require "simplecov/configuration"
-SimpleCov.send :extend, SimpleCov::Configuration
+SimpleCov.extend SimpleCov::Configuration
 require "simplecov/exit_codes"
 require "simplecov/profiles"
+require "simplecov/source_file/line"
+require "simplecov/source_file/branch"
 require "simplecov/source_file"
 require "simplecov/file_list"
 require "simplecov/result"
@@ -178,13 +427,17 @@ require "simplecov/filter"
 require "simplecov/formatter"
 require "simplecov/last_run"
 require "simplecov/lines_classifier"
-require "simplecov/raw_coverage"
 require "simplecov/result_merger"
 require "simplecov/command_guesser"
 require "simplecov/version"
+require "simplecov/result_adapter"
+require "simplecov/combine"
+require "simplecov/combine/branches_combiner"
+require "simplecov/combine/files_combiner"
+require "simplecov/combine/lines_combiner"
+require "simplecov/combine/results_combiner"
+require "simplecov/useless_results_remover"
+require "simplecov/simulate_coverage"
 
 # Load default config
 require "simplecov/defaults" unless ENV["SIMPLECOV_NO_DEFAULTS"]
-
-# Load Rails integration (only for Rails 3, see #113)
-require "simplecov/railtie" if defined? Rails::Railtie