shoppe-paypal 1.0.0 → 1.1.0

data/vendor/bundle/ruby/2.1.0/gems/ruby-ole-1.2.11.8/lib/ole/storage.rb

@@ -0,0 +1,3 @@
+require 'ole/storage/base'
+require 'ole/storage/file_system'
+require 'ole/storage/meta_data'

data/vendor/bundle/ruby/2.1.0/gems/ruby-ole-1.2.11.8/lib/ole/storage/base.rb

@@ -0,0 +1,945 @@
+# encoding: ASCII-8BIT
+
+require 'tempfile'
+
+require 'ole/base'
+require 'ole/types'
+require 'ole/ranges_io'
+
+module Ole # :nodoc:
+	#
+	# This class is the primary way the user interacts with an OLE storage file.
+	#
+	# = TODO
+	#
+	# * the custom header cruft for Header and Dirent needs some love.
+	# * i have a number of classes doing load/save combos: Header, AllocationTable, Dirent,
+	#   and, in a manner of speaking, but arguably different, Storage itself.
+	#   they have differing api's which would be nice to rethink.
+	#   AllocationTable::Big must be created aot now, as it is used for all subsequent reads.
+	#
+	class Storage
+		# thrown for any bogus OLE file errors.
+		class FormatError < StandardError # :nodoc:
+		end
+
+		# options used at creation time
+		attr_reader :params
+		# The top of the ole tree structure
+		attr_reader :root
+		# The tree structure in its original flattened form. only valid after #load, or #flush.
+		attr_reader :dirents
+		# The underlying io object to/from which the ole object is serialized, whether we
+		# should close it, and whether it is writeable
+		attr_reader :io, :close_parent, :writeable
+		# Low level internals, you probably shouldn't need to mess with these
+		attr_reader :header, :bbat, :sbat, :sb_file
+
+		# +arg+ should be either a filename, or an +IO+ object, and needs to be seekable.
+		# +mode+ is optional, and should be a regular mode string.
+		def initialize arg, mode=nil, params={}
+			params, mode = mode, nil if Hash === mode
+			params = {:update_timestamps => true}.merge(params)
+			@params = params
+	
+			# get the io object
+			@close_parent, @io = if String === arg
+				mode ||= 'rb'
+				[true, open(arg, mode)]
+			else
+				raise ArgumentError, 'unable to specify mode string with io object' if mode
+				[false, arg]
+			end
+			# force encoding, to avoid picking up source encoding with StringIO or files in text mode
+			@io.set_encoding Encoding::ASCII_8BIT if @io.respond_to?(:set_encoding)
+			# do we have this file opened for writing? use mode when provided,
+			# otherwise try no-op methods which will raise if read-only
+			@writeable = begin
+				if mode
+					IOMode.new(mode).writeable?
+				else
+					# works on mri 1.8 & jruby
+					@io.flush
+					begin
+						# works on mri 1.9 & rubinius, throws EBADF on windows
+						@io.write_nonblock('') if @io.respond_to?(:write_nonblock)
+					rescue Errno::EBADF
+						# for windows
+						@io.syswrite('');
+					end
+					true
+				end
+			rescue IOError
+				false
+			end
+			# silence undefined warning in clear
+			@sb_file = nil
+			# if the io object has data, we should load it, otherwise start afresh
+			# this should be based on the mode string rather.
+			@io.size > 0 ? load : clear
+		end
+
+		# somewhat similar to File.open, the open class method allows a block form where
+		# the Ole::Storage object is automatically closed on completion of the block.
+		def self.open arg, mode=nil, params={}
+			ole = new arg, mode, params
+			if block_given?
+				begin   yield ole
+				ensure; ole.close
+				end
+			else ole
+			end
+		end
+
+		# load document from file.
+		#
+		# TODO: implement various allocationtable checks, maybe as a AllocationTable#fsck function :)
+		#
+		# 1. reterminate any chain not ending in EOC.
+		#    compare file size with actually allocated blocks per file.
+		# 2. pass through all chain heads looking for collisions, and making sure nothing points to them
+		#    (ie they are really heads). in both sbat and mbat
+		# 3. we know the locations of the bbat data, and mbat data. ensure that there are placeholder blocks
+		#    in the bat for them.
+		# 4. maybe a check of excess data. if there is data outside the bbat.truncate.length + 1 * block_size,
+		#    (eg what is used for truncate in #flush), then maybe add some sort of message about that. it
+		#    will be automatically thrown away at close time.
+		def load
+			# we always read 512 for the header block. if the block size ends up being different,
+			# what happens to the 109 fat entries. are there more/less entries?
+			@io.rewind
+			header_block = @io.read 512
+			@header = Header.new header_block
+
+			# create an empty bbat.
+			@bbat = AllocationTable::Big.new self
+			bbat_chain = header_block[Header::SIZE..-1].unpack 'V*'
+			mbat_block = @header.mbat_start
+			@header.num_mbat.times do
+				blocks = @bbat.read([mbat_block]).unpack 'V*'
+				mbat_block = blocks.pop
+				bbat_chain += blocks
+			end
+			# am i using num_bat in the right way?
+			@bbat.load @bbat.read(bbat_chain[0, @header.num_bat])
+	
+			# get block chain for directories, read it, then split it into chunks and load the
+			# directory entries. semantics changed - used to cut at first dir where dir.type == 0
+			@dirents = @bbat.read(@header.dirent_start).to_enum(:each_chunk, Dirent::SIZE).
+				map { |str| Dirent.new self, str }
+
+			# now reorder from flat into a tree
+			# links are stored in some kind of balanced binary tree
+			# check that everything is visited at least, and at most once
+			# similarly with the blocks of the file.
+			# was thinking of moving this to Dirent.to_tree instead.
+			class << @dirents
+				def to_tree idx=0
+					return [] if idx == Dirent::EOT
+					d = self[idx]
+					to_tree(d.child).each { |child| d << child }
+					raise FormatError, "directory #{d.inspect} used twice" if d.idx
+					d.idx = idx
+					to_tree(d.prev) + [d] + to_tree(d.next)
+				end
+			end
+
+			@root = @dirents.to_tree.first
+			@dirents.reject! { |d| d.type_id == 0 }
+			# silence this warning by default, its not really important (issue #5).
+			# fairly common one appears to be "R" (from office OS X?) which smells
+			# like some kind of UTF16 snafu, but scottwillson also has had some kanji...
+			#Log.warn "root name was #{@root.name.inspect}" unless @root.name == 'Root Entry'
+			unused = @dirents.reject(&:idx).length
+			Log.warn "#{unused} unused directories" if unused > 0
+
+			# FIXME i don't currently use @header.num_sbat which i should
+			# hmm. nor do i write it. it means what exactly again?
+			# which mode to use here?
+			@sb_file = RangesIOResizeable.new @bbat, :first_block => @root.first_block, :size => @root.size
+			@sbat = AllocationTable::Small.new self
+			@sbat.load @bbat.read(@header.sbat_start)
+		end
+
+		def close
+			@sb_file.close
+			flush if @writeable
+			@io.close if @close_parent
+		end
+
+		# the flush method is the main "save" method. all file contents are always
+		# written directly to the file by the RangesIO objects, all this method does
+		# is write out all the file meta data - dirents, allocation tables, file header
+		# etc.
+		#
+		# maybe add an option to zero the padding, and any remaining avail blocks in the
+		# allocation table.
+		#
+		# TODO: long and overly complex. simplify and test better. eg, perhaps move serialization
+		# of bbat to AllocationTable::Big. 
+		def flush
+			# update root dirent, and flatten dirent tree
+			@root.name = 'Root Entry'
+			@root.first_block = @sb_file.first_block
+			@root.size = @sb_file.size
+			@dirents = @root.flatten
+
+			# serialize the dirents using the bbat
+			RangesIOResizeable.open @bbat, 'w', :first_block => @header.dirent_start do |io|
+				io.write @dirents.map { |dirent| dirent.to_s }.join
+				padding = (io.size / @bbat.block_size.to_f).ceil * @bbat.block_size - io.size
+				io.write 0.chr * padding
+				@header.dirent_start = io.first_block
+			end
+
+			# serialize the sbat
+			# perhaps the blocks used by the sbat should be marked with BAT?
+			RangesIOResizeable.open @bbat, 'w', :first_block => @header.sbat_start do |io|
+				io.write @sbat.to_s
+				@header.sbat_start = io.first_block
+				@header.num_sbat = @bbat.chain(@header.sbat_start).length
+			end
+
+			# create RangesIOResizeable hooked up to the bbat. use that to claim bbat blocks using
+			# truncate. then when its time to write, convert that chain and some chunk of blocks at
+			# the end, into META_BAT blocks. write out the chain, and those meta bat blocks, and its
+			# done.
+			# this is perhaps not good, as we reclaim all bat blocks here, which
+			# may include the sbat we just wrote. FIXME
+			@bbat.map! do |b|
+				b == AllocationTable::BAT || b == AllocationTable::META_BAT ? AllocationTable::AVAIL : b
+			end
+
+			# currently we use a loop. this could be better, but basically,
+			# the act of writing out the bat, itself requires blocks which get
+			# recorded in the bat.
+			#
+			# i'm sure that there'd be some simpler closed form solution to this. solve
+			# recursive func:
+			#
+			#   num_mbat_blocks = ceil(max((mbat_len - 109) * 4 / block_size, 0))
+			#   bbat_len = initial_bbat_len + num_mbat_blocks
+			#   mbat_len = ceil(bbat_len * 4 / block_size)
+			#
+			# the actual bbat allocation table is itself stored throughout the file, and that chain
+			# is stored in the initial blocks, and the mbat blocks.
+			num_mbat_blocks = 0
+			io = RangesIOResizeable.new @bbat, 'w', :first_block => AllocationTable::EOC
+			# truncate now, so that we can simplify size calcs - the mbat blocks will be appended in a
+			# contiguous chunk at the end.
+			# hmmm, i think this truncate should be matched with a truncate of the underlying io. if you
+			# delete a lot of stuff, and free up trailing blocks, the file size never shrinks. this can
+			# be fixed easily, add an io truncate
+			@bbat.truncate!
+			@io.truncate @bbat.block_size * (@bbat.length + 1)
+			while true
+				# get total bbat size. equivalent to @bbat.to_s.length, but for the factoring in of
+				# the mbat blocks. we can't just add the mbat blocks directly to the bbat, as as this iteration
+				# progresses, more blocks may be needed for the bat itself (if there are no more gaps), and the
+				# mbat must remain contiguous.
+				bbat_data_len = ((@bbat.length + num_mbat_blocks) * 4 / @bbat.block_size.to_f).ceil * @bbat.block_size
+				# now storing the excess mbat blocks also increases the size of the bbat:
+				new_num_mbat_blocks = ([bbat_data_len / @bbat.block_size - 109, 0].max * 4 / (@bbat.block_size.to_f - 4)).ceil
+				if new_num_mbat_blocks != num_mbat_blocks
+					# need more space for the mbat.
+					num_mbat_blocks = new_num_mbat_blocks
+				elsif io.size != bbat_data_len
+					# need more space for the bat
+					# this may grow the bbat, depending on existing available blocks
+					io.truncate bbat_data_len
+				else
+					break
+				end
+			end
+
+			# now extract the info we want:
+			ranges = io.ranges
+			bbat_chain = @bbat.chain io.first_block
+			io.close
+			bbat_chain.each { |b| @bbat[b] = AllocationTable::BAT }
+			# tack on the mbat stuff
+			@header.num_bat = bbat_chain.length
+			mbat_blocks = (0...num_mbat_blocks).map do
+				block = @bbat.free_block
+				@bbat[block] = AllocationTable::META_BAT
+				block
+			end
+			@header.mbat_start = mbat_blocks.first || AllocationTable::EOC
+
+			# now finally write the bbat, using a not resizable io.
+			# the mode here will be 'r', which allows write atm. 
+			RangesIO.open(@io, :ranges => ranges) { |f| f.write @bbat.to_s }
+
+			# this is the mbat. pad it out.
+			bbat_chain += [AllocationTable::AVAIL] * [109 - bbat_chain.length, 0].max
+			@header.num_mbat = num_mbat_blocks
+			if num_mbat_blocks != 0
+				# write out the mbat blocks now. first of all, where are they going to be?
+				mbat_data = bbat_chain[109..-1]
+				# expand the mbat_data to include the linked list forward pointers.
+				mbat_data = mbat_data.to_enum(:each_slice, @bbat.block_size / 4 - 1).to_a.
+					zip(mbat_blocks[1..-1] + [nil]).map { |a, b| b ? a + [b] : a }
+				# pad out the last one.
+				mbat_data.last.push(*([AllocationTable::AVAIL] * (@bbat.block_size / 4 - mbat_data.last.length)))
+				RangesIO.open @io, :ranges => @bbat.ranges(mbat_blocks) do |f|
+					f.write mbat_data.flatten.pack('V*')
+				end
+			end
+
+			# now seek back and write the header out
+			@io.seek 0
+			@io.write @header.to_s + bbat_chain[0, 109].pack('V*')
+			@io.flush
+		end
+
+		def clear
+			# initialize to equivalent of loading an empty ole document.
+			Log.warn 'creating new ole storage object on non-writable io' unless @writeable
+			@header = Header.new
+			@bbat = AllocationTable::Big.new self
+			@root = Dirent.new self, :type => :root, :name => 'Root Entry'
+			@dirents = [@root]
+			@root.idx = 0
+			@sb_file.close if @sb_file
+			@sb_file = RangesIOResizeable.new @bbat, :first_block => AllocationTable::EOC
+			@sbat = AllocationTable::Small.new self
+			# throw everything else the hell away
+			@io.truncate 0
+		end
+
+		# could be useful with mis-behaving ole documents. or to just clean them up.
+		def repack temp=:file
+			case temp
+			when :file
+				Tempfile.open 'ole-repack' do |io|
+					io.binmode
+					repack_using_io io
+				end
+			when :mem;  StringIO.open('', &method(:repack_using_io))
+			else raise ArgumentError, "unknown temp backing #{temp.inspect}"
+			end
+		end
+
+		def repack_using_io temp_io
+			@io.rewind
+			IO.copy @io, temp_io
+			clear
+			Storage.open temp_io, nil, @params do |temp_ole|
+				#temp_ole.root.type = :dir
+				Dirent.copy temp_ole.root, root
+			end
+		end
+
+		def bat_for_size size
+			# note >=, not > previously.
+			size >= @header.threshold ? @bbat : @sbat
+		end
+
+		def inspect
+			"#<#{self.class} io=#{@io.inspect} root=#{@root.inspect}>"
+		end
+
+		#
+		# A class which wraps the ole header
+		#
+		# Header.new can be both used to load from a string, or to create from
+		# defaults. Serialization is accomplished with the #to_s method.
+		#
+		class Header < Struct.new(
+				:magic, :clsid, :minor_ver, :major_ver, :byte_order, :b_shift, :s_shift,
+				:reserved, :csectdir, :num_bat, :dirent_start, :transacting_signature, :threshold,
+				:sbat_start, :num_sbat, :mbat_start, :num_mbat
+			)
+			PACK = 'a8 a16 v2 a2 v2 a6 V3 a4 V5'
+			SIZE = 0x4c
+			# i have seen it pointed out that the first 4 bytes of hex,
+			# 0xd0cf11e0, is supposed to spell out docfile. hmmm :)
+			MAGIC = "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1"  # expected value of Header#magic
+			# what you get if creating new header from scratch.
+			# AllocationTable::EOC isn't available yet. meh.
+			EOC = 0xfffffffe
+			DEFAULT = [
+				MAGIC, 0.chr * 16, 59, 3, "\xfe\xff", 9, 6,
+				0.chr * 6, 0, 1, EOC, 0.chr * 4,
+				4096, EOC, 0, EOC, 0
+			]
+
+			def initialize values=DEFAULT
+				values = values.unpack(PACK) if String === values
+				super(*values)
+				validate!
+			end
+
+			def to_s
+				to_a.pack PACK
+			end
+
+			def validate!
+				raise FormatError, "OLE2 signature is invalid" unless magic == MAGIC
+				if num_bat == 0 or # is that valid for a completely empty file?
+					 # not sure about this one. basically to do max possible bat given size of mbat
+					 num_bat > 109 && num_bat > 109 + num_mbat * (1 << b_shift - 2) or
+					 # shouldn't need to use the mbat as there is enough space in the header block
+					 num_bat < 109 && num_mbat != 0 or
+					 # given the size of the header is 76, if b_shift <= 6, blocks address the header.
+					 s_shift > b_shift or b_shift <= 6 or b_shift >= 31 or
+					 # we only handle little endian
+					 byte_order != "\xfe\xff"
+					raise FormatError, "not valid OLE2 structured storage file"
+				end
+				# relaxed this, due to test-msg/qwerty_[1-3]*.msg they all had
+				# 3 for this value. 
+				# transacting_signature != "\x00" * 4 or
+				if threshold != 4096 or
+					 num_mbat == 0 && ![AllocationTable::EOC, AllocationTable::AVAIL].include?(mbat_start) or
+					 reserved != "\x00" * 6
+					Log.warn "may not be a valid OLE2 structured storage file"
+				end
+				true
+			end
+		end
+
+		#
+		# +AllocationTable+'s hold the chains corresponding to files. Given
+		# an initial index, <tt>AllocationTable#chain</tt> follows the chain, returning
+		# the blocks that make up that file.
+		#
+		# There are 2 allocation tables, the bbat, and sbat, for big and small
+		# blocks respectively. The block chain should be loaded using either
+		# <tt>Storage#read_big_blocks</tt> or <tt>Storage#read_small_blocks</tt>
+		# as appropriate.
+		#
+		# Whether or not big or small blocks are used for a file depends on
+		# whether its size is over the <tt>Header#threshold</tt> level.
+		#
+		# An <tt>Ole::Storage</tt> document is serialized as a series of directory objects,
+		# which are stored in blocks throughout the file. The blocks are either
+		# big or small, and are accessed using the <tt>AllocationTable</tt>.
+		#
+		# The bbat allocation table's data is stored in the spare room in the header
+		# block, and in extra blocks throughout the file as referenced by the meta
+		# bat.  That chain is linear, as there is no higher level table.
+		#
+		# AllocationTable.new is used to create an empty table. It can parse a string
+		# with the #load method. Serialization is accomplished with the #to_s method.
+		#
+		class AllocationTable < Array
+			# a free block (I don't currently leave any blocks free), although I do pad out
+			# the allocation table with AVAIL to the block size.
+			AVAIL		 = 0xffffffff
+			EOC			 = 0xfffffffe # end of a chain
+			# these blocks are used for storing the allocation table chains
+			BAT			 = 0xfffffffd
+			META_BAT = 0xfffffffc
+
+			attr_reader :ole, :io, :block_size
+			def initialize ole
+				@ole = ole
+				@sparse = true
+				super()
+			end
+
+			def load data
+				replace data.unpack('V*')
+			end
+
+			def truncate
+				# this strips trailing AVAILs. come to think of it, this has the potential to break
+				# bogus ole. if you terminate using AVAIL instead of EOC, like I did before. but that is
+				# very broken. however, if a chain ends with AVAIL, it should probably be fixed to EOC
+				# at load time.
+				temp = reverse
+				not_avail = temp.find { |b| b != AVAIL } and temp = temp[temp.index(not_avail)..-1]
+				temp.reverse
+			end
+
+			def truncate!
+				replace truncate
+			end
+
+			def to_s
+				table = truncate
+				# pad it out some
+				num = @ole.bbat.block_size / 4
+				# do you really use AVAIL? they probably extend past end of file, and may shortly
+				# be used for the bat. not really good.
+				table += [AVAIL] * (num - (table.length % num)) if (table.length % num) != 0
+				table.pack 'V*'
+			end
+
+			# rewrote this to be non-recursive as it broke on a large attachment
+			# chain with a stack error
+			def chain idx
+				a = []
+				until idx >= META_BAT
+					raise FormatError, "broken allocationtable chain" if idx < 0 || idx > length
+					a << idx
+					idx = self[idx]
+				end
+				Log.warn "invalid chain terminator #{idx}" unless idx == EOC
+				a
+			end
+			
+			# Turn a chain (an array given by +chain+) of blocks (optionally
+			# truncated to +size+) into an array of arrays describing the stretches of
+			# bytes in the file that it belongs to.
+			#
+			# The blocks are Big or Small blocks depending on the table type.
+			def blocks_to_ranges chain, size=nil
+				# truncate the chain if required
+				chain = chain[0, (size.to_f / block_size).ceil] if size
+				# convert chain to ranges of the block size
+				ranges = chain.map { |i| [block_size * i, block_size] }
+				# truncate final range if required
+				ranges.last[1] -= (ranges.length * block_size - size) if ranges.last and size
+				ranges
+			end
+
+			def ranges chain, size=nil
+				chain = self.chain(chain) unless Array === chain
+				blocks_to_ranges chain, size
+			end
+
+			# quick shortcut. chain can be either a head (in which case the table is used to
+			# turn it into a chain), or a chain. it is converted to ranges, then to rangesio.
+			def open chain, size=nil, &block
+				RangesIO.open @io, :ranges => ranges(chain, size), &block
+			end
+
+			def read chain, size=nil
+				open chain, size, &:read
+			end
+
+			# catch any method that may add an AVAIL somewhere in the middle, thus invalidating
+			# the @sparse speedup for free_block. annoying using eval, but define_method won't
+			# work for this.
+			# FIXME
+			[:map!, :collect!].each do |name|
+				eval <<-END
+					def #{name}(*args, &block)
+						@sparse = true
+						super
+					end
+				END
+			end
+
+			def []= idx, val
+				@sparse = true if val == AVAIL
+				super
+			end
+
+			def free_block
+				if @sparse
+					i = index(AVAIL) and return i
+					@sparse = false
+				end
+				push AVAIL
+				length - 1
+			end
+
+			# must return first_block. modifies +blocks+ in place
+			def resize_chain blocks, size
+				new_num_blocks = (size / block_size.to_f).ceil
+				old_num_blocks = blocks.length
+				if new_num_blocks < old_num_blocks
+					# de-allocate some of our old blocks. TODO maybe zero them out in the file???
+					(new_num_blocks...old_num_blocks).each { |i| self[blocks[i]] = AVAIL }
+					self[blocks[new_num_blocks-1]] = EOC if new_num_blocks > 0
+					blocks.slice! new_num_blocks..-1
+				elsif new_num_blocks > old_num_blocks
+					# need some more blocks.
+					last_block = blocks.last
+					(new_num_blocks - old_num_blocks).times do
+						block = free_block
+						# connect the chain. handle corner case of blocks being [] initially
+						self[last_block] = block if last_block
+						blocks << block
+						last_block = block
+						self[last_block] = EOC
+					end
+				end
+				# update ranges, and return that also now
+				blocks
+			end
+
+			class Big < AllocationTable
+				def initialize(*args)
+					super
+					@block_size = 1 << @ole.header.b_shift
+					@io = @ole.io
+				end
+
+				# Big blocks are kind of -1 based, in order to not clash with the header.
+				def blocks_to_ranges chain, size=nil
+					#super chain.map { |b| b + 1 }, size
+					# duplicated from AllocationTable#blocks_to_ranges to avoid chain.map
+					# which was decent part of benchmark profile
+					chain = chain[0, (size.to_f / block_size).ceil] if size
+					ranges = chain.map { |i| [block_size * (i + 1), block_size] }
+					ranges.last[1] -= (ranges.length * block_size - size) if ranges.last and size
+					ranges
+				end
+			end
+
+			class Small < AllocationTable
+				def initialize(*args)
+					super
+					@block_size = 1 << @ole.header.s_shift
+					@io = @ole.sb_file
+				end
+			end
+		end
+
+		# like normal RangesIO, but Ole::Storage specific. the ranges are backed by an
+		# AllocationTable, and can be resized. used for read/write to 2 streams:
+		# 1. serialized dirent data
+		# 2. sbat table data
+		# 3. all dirents but through RangesIOMigrateable below
+		#
+		# Note that all internal access to first_block is through accessors, as it is sometimes
+		# useful to redirect it.
+		class RangesIOResizeable < RangesIO
+			attr_reader   :bat
+			attr_accessor :first_block
+			def initialize bat, mode='r', params={}
+				mode, params = 'r', mode if Hash === mode
+				first_block, size = params.values_at :first_block, :size
+				raise ArgumentError, 'must specify first_block' unless first_block
+				@bat = bat
+				self.first_block = first_block
+				# we now cache the blocks chain, for faster resizing.
+				@blocks = @bat.chain first_block
+				super @bat.io, mode, :ranges => @bat.ranges(@blocks, size)
+			end
+
+			def truncate size
+				# note that old_blocks is != @ranges.length necessarily. i'm planning to write a
+				# merge_ranges function that merges sequential ranges into one as an optimization.
+				@bat.resize_chain @blocks, size
+				@pos = size if @pos > size
+				self.ranges = @bat.ranges(@blocks, size)
+				self.first_block = @blocks.empty? ? AllocationTable::EOC : @blocks.first
+
+				# don't know if this is required, but we explicitly request our @io to grow if necessary
+				# we never shrink it though. maybe this belongs in allocationtable, where smarter decisions
+				# can be made.
+				# maybe its ok to just seek out there later??
+				max = @ranges.map { |pos, len| pos + len }.max || 0
+				@io.truncate max if max > @io.size
+			end
+		end
+
+		# like RangesIOResizeable, but Ole::Storage::Dirent specific. provides for migration
+		# between bats based on size, and updating the dirent.
+		class RangesIOMigrateable < RangesIOResizeable
+			attr_reader :dirent
+			def initialize dirent, mode='r'
+				@dirent = dirent
+				super @dirent.ole.bat_for_size(@dirent.size), mode,
+					:first_block => @dirent.first_block, :size => @dirent.size
+			end
+
+			def truncate size
+				bat = @dirent.ole.bat_for_size size
+				if bat.class != @bat.class
+					# bat migration needed! we need to backup some data. the amount of data
+					# should be <= @ole.header.threshold, so we can just hold it all in one buffer.
+					# backup this
+					pos = [@pos, size].min
+					self.pos = 0
+					keep = read [@size, size].min
+					# this does a normal truncate to 0, removing our presence from the old bat, and
+					# rewrite the dirent's first_block
+					super 0
+					@bat = bat
+					# just change the underlying io from right under everyone :)
+					@io = bat.io
+					# important to do this now, before the write. as the below write will always
+					# migrate us back to sbat! this will now allocate us +size+ in the new bat.
+					super
+					self.pos = 0
+					write keep
+					self.pos = pos
+				else
+					super
+				end
+				# now just update the file
+				@dirent.size = size
+			end
+
+			# forward this to the dirent
+			def first_block
+				@dirent.first_block
+			end
+
+			def first_block= val
+				@dirent.first_block = val
+			end
+		end
+
+		#
+		# A class which wraps an ole directory entry. Can be either a directory
+		# (<tt>Dirent#dir?</tt>) or a file (<tt>Dirent#file?</tt>)
+		#
+		# Most interaction with <tt>Ole::Storage</tt> is through this class.
+		# The 2 most important functions are <tt>Dirent#children</tt>, and
+		# <tt>Dirent#data</tt>.
+		# 
+		# was considering separate classes for dirs and files. some methods/attrs only
+		# applicable to one or the other.
+		#
+		# As with the other classes, #to_s performs the serialization.
+		#
+		class Dirent < Struct.new(
+				:name_utf16, :name_len, :type_id, :colour, :prev, :next, :child,
+				:clsid, :flags, # dirs only
+				:create_time_str, :modify_time_str, # files only
+				:first_block, :size, :reserved
+			)
+			include RecursivelyEnumerable
+
+			PACK = 'a64 v C C V3 a16 V a8 a8 V2 a4'
+			SIZE = 128
+			TYPE_MAP = {
+				# this is temporary
+				0 => :empty,
+				1 => :dir,
+				2 => :file,
+				5 => :root
+			}
+			# something to do with the fact that the tree is supposed to be red-black
+			COLOUR_MAP = {
+				0 => :red,
+				1 => :black
+			}
+			# used in the next / prev / child stuff to show that the tree ends here.
+			# also used for first_block for directory.
+			EOT = 0xffffffff
+			DEFAULT = [
+				0.chr * 2, 2, 0, # will get overwritten
+				1, EOT, EOT, EOT,
+				0.chr * 16, 0, nil, nil,
+				AllocationTable::EOC, 0, 0.chr * 4
+			]
+
+			# This returns all the children of this +Dirent+. It is filled in
+			# when the tree structure is recreated.
+			attr_reader :children
+			attr_reader :name
+			attr_reader :ole, :type, :create_time, :modify_time
+			attr_reader :parent
+
+			# i think its just used by the tree building
+			attr_accessor :idx
+
+			# these are for internal use and are used for faster lookup.
+			attr_reader :name_lookup
+			attr_writer :parent
+			protected :name_lookup, :parent=
+
+			def initialize ole, values=DEFAULT, params={}
+				@ole = ole				
+				values, params = DEFAULT, values if Hash === values
+				values = values.unpack(PACK) if String === values
+				super(*values)
+
+				# extra parsing from the actual struct values
+				@name = params[:name] || Types::Variant.load(Types::VT_LPWSTR, name_utf16[0...name_len])
+				@type = if params[:type]
+					unless TYPE_MAP.values.include?(params[:type])
+						raise ArgumentError, "unknown type #{params[:type].inspect}"
+					end
+					params[:type]
+				else
+					TYPE_MAP[type_id] or raise FormatError, "unknown type_id #{type_id.inspect}"
+				end
+
+				# further extra type specific stuff
+				if file?
+					default_time = @ole.params[:update_timestamps] ? Types::FileTime.now : nil
+					@create_time ||= default_time
+					@modify_time ||= default_time
+					@create_time = Types::Variant.load(Types::VT_FILETIME, create_time_str) if create_time_str
+					@modify_time = Types::Variant.load(Types::VT_FILETIME, create_time_str) if modify_time_str
+					@children = nil
+					@name_lookup = nil
+				else
+					@create_time = nil
+					@modify_time = nil
+					self.size = 0 unless @type == :root
+					@children = []
+					@name_lookup = {}
+				end
+
+				@parent = nil
+				
+				# to silence warnings. used for tree building at load time
+				# only.
+				@idx = nil
+			end
+
+			def name= name
+				if @parent
+					map = @parent.instance_variable_get :@name_lookup
+					map.delete @name
+					map[name] = self
+				end
+				@name = name
+			end
+
+			def open mode='r'
+				raise Errno::EISDIR unless file?
+				io = RangesIOMigrateable.new self, mode
+				@modify_time = Types::FileTime.now if io.mode.writeable?
+				if block_given?
+					begin   yield io
+					ensure; io.close
+					end
+				else io
+				end
+			end
+
+			def read limit=nil
+				open { |io| io.read limit }
+			end
+
+			def file?
+				type == :file
+			end
+
+			def dir?
+				# to count root as a dir.
+				!file?
+			end
+
+			# maybe need some options regarding case sensitivity.
+			def / name
+				@name_lookup[name]
+			end
+
+			def [] idx
+				if String === idx
+					#warn 'String form of Dirent#[] is deprecated'
+					self / idx
+				else
+					super
+				end
+			end
+
+			# move to ruby-msg. and remove from here
+			def time
+				#warn 'Dirent#time is deprecated'
+				create_time || modify_time
+			end
+
+			def each_child(&block)
+				@children.each(&block) if dir?
+			end
+
+			# flattens the tree starting from here into +dirents+. note it modifies its argument.
+			def flatten dirents=[]
+				@idx = dirents.length
+				dirents << self
+				if file?
+					self.prev = self.next = self.child = EOT
+				else
+					children.each { |child| child.flatten dirents } 
+					self.child = Dirent.flatten_helper children
+				end
+				dirents
+			end
+
+			# i think making the tree structure optimized is actually more complex than this, and
+			# requires some intelligent ordering of the children based on names, but as long as
+			# it is valid its ok.
+			# actually, i think its ok. gsf for example only outputs a singly-linked-list, where
+			# prev is always EOT.
+			def self.flatten_helper children
+				return EOT if children.empty?
+				i = children.length / 2
+				this = children[i]
+				this.prev, this.next = [(0...i), (i+1..-1)].map { |r| flatten_helper children[r] }
+				this.idx
+			end
+
+			def to_s
+				tmp = Types::Variant.dump(Types::VT_LPWSTR, name)
+				tmp = tmp[0, 62] if tmp.length > 62
+				tmp += 0.chr * 2
+				self.name_len = tmp.length
+				self.name_utf16 = tmp + 0.chr * (64 - tmp.length)
+				# type_id can perhaps be set in the initializer, as its read only now.
+				self.type_id = TYPE_MAP.to_a.find { |id, name| @type == name }.first
+				# for the case of files, it is assumed that that was handled already
+				# note not dir?, so as not to override root's first_block
+				self.first_block = Dirent::EOT if type == :dir
+				if file?
+					# this is messed up. it changes the time stamps regardless of whether the file
+					# was actually touched. instead, any open call with a writeable mode, should update
+					# the modify time. create time would be set in new.
+					if @ole.params[:update_timestamps]
+						self.create_time_str = Types::Variant.dump Types::VT_FILETIME, @create_time
+						self.modify_time_str = Types::Variant.dump Types::VT_FILETIME, @modify_time
+					end
+				else
+					self.create_time_str = 0.chr * 8
+					self.modify_time_str = 0.chr * 8
+				end
+				to_a.pack PACK
+			end
+
+			def inspect
+				str = "#<Dirent:#{name.inspect}"
+				# perhaps i should remove the data snippet. its not that useful anymore.
+				# there is also some dir specific stuff. like clsid, flags, that i should
+				# probably include
+				if file?
+					tmp = read 9
+					data = tmp.length == 9 ? tmp[0, 5] + '...' : tmp
+					str << " size=#{size}" +
+						"#{modify_time ? ' modify_time=' + modify_time.to_s.inspect : nil}" +
+						" data=#{data.inspect}"
+				end
+				str + '>'
+			end
+
+			def << child
+				child.parent = self
+				@name_lookup[child.name] = child
+				@children << child
+			end
+
+			# remove the Dirent +child+ from the children array, truncating the data
+			# by default.
+			def delete child, truncate=true
+				# remove from our child array, so that on reflatten and re-creation of @dirents, it will be gone
+				unless @children.delete(child)
+					raise ArgumentError, "#{child.inspect} not a child of #{self.inspect}"
+				end
+				@name_lookup.delete(child.name)
+				child.parent = nil
+				# free our blocks
+				child.open { |io| io.truncate 0 } if child.file?
+			end
+
+			def self.copy src, dst
+				# copies the contents of src to dst. must be the same type. this will throw an
+				# error on copying to root. maybe this will recurse too much for big documents??
+				raise ArgumentError, 'differing types' if src.file? and !dst.file?
+				dst.name = src.name
+				if src.dir?
+					src.children.each do |src_child|
+						dst_child = Dirent.new dst.ole, :type => src_child.type
+						dst << dst_child
+						Dirent.copy src_child, dst_child
+					end
+				else
+					src.open do |src_io|
+						dst.open { |dst_io| IO.copy src_io, dst_io }
+					end
+				end
+			end
+		end
+	end
+end
+