rugged 0.28.5 → 1.1.1

data/vendor/libgit2/deps/pcre/ucp.h

@@ -0,0 +1,224 @@
+/*************************************************
+*          Unicode Property Table handler        *
+*************************************************/
+
+#ifndef _UCP_H
+#define _UCP_H
+
+/* This file contains definitions of the property values that are returned by
+the UCD access macros. New values that are added for new releases of Unicode
+should always be at the end of each enum, for backwards compatibility.
+
+IMPORTANT: Note also that the specific numeric values of the enums have to be
+the same as the values that are generated by the maint/MultiStage2.py script,
+where the equivalent property descriptive names are listed in vectors.
+
+ALSO: The specific values of the first two enums are assumed for the table
+called catposstab in pcre_compile.c. */
+
+/* These are the general character categories. */
+
+enum {
+  ucp_C,     /* Other */
+  ucp_L,     /* Letter */
+  ucp_M,     /* Mark */
+  ucp_N,     /* Number */
+  ucp_P,     /* Punctuation */
+  ucp_S,     /* Symbol */
+  ucp_Z      /* Separator */
+};
+
+/* These are the particular character categories. */
+
+enum {
+  ucp_Cc,    /* Control */
+  ucp_Cf,    /* Format */
+  ucp_Cn,    /* Unassigned */
+  ucp_Co,    /* Private use */
+  ucp_Cs,    /* Surrogate */
+  ucp_Ll,    /* Lower case letter */
+  ucp_Lm,    /* Modifier letter */
+  ucp_Lo,    /* Other letter */
+  ucp_Lt,    /* Title case letter */
+  ucp_Lu,    /* Upper case letter */
+  ucp_Mc,    /* Spacing mark */
+  ucp_Me,    /* Enclosing mark */
+  ucp_Mn,    /* Non-spacing mark */
+  ucp_Nd,    /* Decimal number */
+  ucp_Nl,    /* Letter number */
+  ucp_No,    /* Other number */
+  ucp_Pc,    /* Connector punctuation */
+  ucp_Pd,    /* Dash punctuation */
+  ucp_Pe,    /* Close punctuation */
+  ucp_Pf,    /* Final punctuation */
+  ucp_Pi,    /* Initial punctuation */
+  ucp_Po,    /* Other punctuation */
+  ucp_Ps,    /* Open punctuation */
+  ucp_Sc,    /* Currency symbol */
+  ucp_Sk,    /* Modifier symbol */
+  ucp_Sm,    /* Mathematical symbol */
+  ucp_So,    /* Other symbol */
+  ucp_Zl,    /* Line separator */
+  ucp_Zp,    /* Paragraph separator */
+  ucp_Zs     /* Space separator */
+};
+
+/* These are grapheme break properties. Note that the code for processing them
+assumes that the values are less than 16. If more values are added that take
+the number to 16 or more, the code will have to be rewritten. */
+
+enum {
+  ucp_gbCR,                /*  0 */
+  ucp_gbLF,                /*  1 */
+  ucp_gbControl,           /*  2 */
+  ucp_gbExtend,            /*  3 */
+  ucp_gbPrepend,           /*  4 */
+  ucp_gbSpacingMark,       /*  5 */
+  ucp_gbL,                 /*  6 Hangul syllable type L */
+  ucp_gbV,                 /*  7 Hangul syllable type V */
+  ucp_gbT,                 /*  8 Hangul syllable type T */
+  ucp_gbLV,                /*  9 Hangul syllable type LV */
+  ucp_gbLVT,               /* 10 Hangul syllable type LVT */
+  ucp_gbRegionalIndicator, /* 11 */
+  ucp_gbOther              /* 12 */
+};
+
+/* These are the script identifications. */
+
+enum {
+  ucp_Arabic,
+  ucp_Armenian,
+  ucp_Bengali,
+  ucp_Bopomofo,
+  ucp_Braille,
+  ucp_Buginese,
+  ucp_Buhid,
+  ucp_Canadian_Aboriginal,
+  ucp_Cherokee,
+  ucp_Common,
+  ucp_Coptic,
+  ucp_Cypriot,
+  ucp_Cyrillic,
+  ucp_Deseret,
+  ucp_Devanagari,
+  ucp_Ethiopic,
+  ucp_Georgian,
+  ucp_Glagolitic,
+  ucp_Gothic,
+  ucp_Greek,
+  ucp_Gujarati,
+  ucp_Gurmukhi,
+  ucp_Han,
+  ucp_Hangul,
+  ucp_Hanunoo,
+  ucp_Hebrew,
+  ucp_Hiragana,
+  ucp_Inherited,
+  ucp_Kannada,
+  ucp_Katakana,
+  ucp_Kharoshthi,
+  ucp_Khmer,
+  ucp_Lao,
+  ucp_Latin,
+  ucp_Limbu,
+  ucp_Linear_B,
+  ucp_Malayalam,
+  ucp_Mongolian,
+  ucp_Myanmar,
+  ucp_New_Tai_Lue,
+  ucp_Ogham,
+  ucp_Old_Italic,
+  ucp_Old_Persian,
+  ucp_Oriya,
+  ucp_Osmanya,
+  ucp_Runic,
+  ucp_Shavian,
+  ucp_Sinhala,
+  ucp_Syloti_Nagri,
+  ucp_Syriac,
+  ucp_Tagalog,
+  ucp_Tagbanwa,
+  ucp_Tai_Le,
+  ucp_Tamil,
+  ucp_Telugu,
+  ucp_Thaana,
+  ucp_Thai,
+  ucp_Tibetan,
+  ucp_Tifinagh,
+  ucp_Ugaritic,
+  ucp_Yi,
+  /* New for Unicode 5.0: */
+  ucp_Balinese,
+  ucp_Cuneiform,
+  ucp_Nko,
+  ucp_Phags_Pa,
+  ucp_Phoenician,
+  /* New for Unicode 5.1: */
+  ucp_Carian,
+  ucp_Cham,
+  ucp_Kayah_Li,
+  ucp_Lepcha,
+  ucp_Lycian,
+  ucp_Lydian,
+  ucp_Ol_Chiki,
+  ucp_Rejang,
+  ucp_Saurashtra,
+  ucp_Sundanese,
+  ucp_Vai,
+  /* New for Unicode 5.2: */
+  ucp_Avestan,
+  ucp_Bamum,
+  ucp_Egyptian_Hieroglyphs,
+  ucp_Imperial_Aramaic,
+  ucp_Inscriptional_Pahlavi,
+  ucp_Inscriptional_Parthian,
+  ucp_Javanese,
+  ucp_Kaithi,
+  ucp_Lisu,
+  ucp_Meetei_Mayek,
+  ucp_Old_South_Arabian,
+  ucp_Old_Turkic,
+  ucp_Samaritan,
+  ucp_Tai_Tham,
+  ucp_Tai_Viet,
+  /* New for Unicode 6.0.0: */
+  ucp_Batak,
+  ucp_Brahmi,
+  ucp_Mandaic,
+  /* New for Unicode 6.1.0: */
+  ucp_Chakma,
+  ucp_Meroitic_Cursive,
+  ucp_Meroitic_Hieroglyphs,
+  ucp_Miao,
+  ucp_Sharada,
+  ucp_Sora_Sompeng,
+  ucp_Takri,
+  /* New for Unicode 7.0.0: */
+  ucp_Bassa_Vah,
+  ucp_Caucasian_Albanian,
+  ucp_Duployan,
+  ucp_Elbasan,
+  ucp_Grantha,
+  ucp_Khojki,
+  ucp_Khudawadi,
+  ucp_Linear_A,
+  ucp_Mahajani,
+  ucp_Manichaean,
+  ucp_Mende_Kikakui,
+  ucp_Modi,
+  ucp_Mro,
+  ucp_Nabataean,
+  ucp_Old_North_Arabian,
+  ucp_Old_Permic,
+  ucp_Pahawh_Hmong,
+  ucp_Palmyrene,
+  ucp_Psalter_Pahlavi,
+  ucp_Pau_Cin_Hau,
+  ucp_Siddham,
+  ucp_Tirhuta,
+  ucp_Warang_Citi
+};
+
+#endif
+
+/* End of ucp.h */

data/vendor/libgit2/deps/zlib/CMakeLists.txt

@@ -1,5 +1,6 @@
-DISABLE_WARNINGS(implicit-fallthrough)
-ADD_DEFINITIONS(-DNO_VIZ -DSTDC -DNO_GZIP)
-FILE(GLOB SRC_ZLIB "*.c" "*.h")
-INCLUDE_DIRECTORIES(".")
-ADD_LIBRARY(zlib OBJECT ${SRC_ZLIB})
+disable_warnings(implicit-fallthrough)
+add_definitions(-DNO_VIZ -DSTDC -DNO_GZIP)
+file(GLOB SRC_ZLIB "*.c" "*.h")
+list(SORT SRC_ZLIB)
+include_directories(".")
+add_library(zlib OBJECT ${SRC_ZLIB})

data/vendor/libgit2/deps/zlib/adler32.c

@@ -177,10 +177,3 @@ uLong ZEXPORT adler32_combine(adler1, adler2, len2)
     return adler32_combine_(adler1, adler2, len2);
 }
 
-uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
-    uLong adler1;
-    uLong adler2;
-    z_off64_t len2;
-{
-    return adler32_combine_(adler1, adler2, len2);
-}

data/vendor/libgit2/deps/zlib/crc32.c

@@ -433,10 +433,3 @@ uLong ZEXPORT crc32_combine(crc1, crc2, len2)
     return crc32_combine_(crc1, crc2, len2);
 }
 
-uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
-    uLong crc1;
-    uLong crc2;
-    z_off64_t len2;
-{
-    return crc32_combine_(crc1, crc2, len2);
-}

data/vendor/libgit2/deps/zlib/deflate.c

@@ -320,6 +320,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 
     s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
     s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
+    memset(s->prev, 0, s->w_size * sizeof(Pos));
     s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
 
     s->high_water = 0;      /* nothing written to s->window yet */

data/vendor/libgit2/include/git2.h

@@ -15,12 +15,14 @@
 #include "git2/blame.h"
 #include "git2/branch.h"
 #include "git2/buffer.h"
+#include "git2/cert.h"
 #include "git2/checkout.h"
 #include "git2/cherrypick.h"
 #include "git2/clone.h"
 #include "git2/commit.h"
 #include "git2/common.h"
 #include "git2/config.h"
+#include "git2/credential.h"
 #include "git2/deprecated.h"
 #include "git2/describe.h"
 #include "git2/diff.h"

data/vendor/libgit2/include/git2/annotated_commit.h

@@ -78,7 +78,7 @@ GIT_EXTERN(int) git_annotated_commit_lookup(
 	const git_oid *id);
 
 /**
- * Creates a `git_annotated_comit` from a revision string.
+ * Creates a `git_annotated_commit` from a revision string.
  *
  * See `man gitrevisions`, or
  * http://git-scm.com/docs/git-rev-parse.html#_specifying_revisions for

data/vendor/libgit2/include/git2/apply.h

@@ -53,25 +53,44 @@ typedef int GIT_CALLBACK(git_apply_hunk_cb)(
 	const git_diff_hunk *hunk,
 	void *payload);
 
+/** Flags controlling the behavior of git_apply */
+typedef enum {
+	/**
+	 * Don't actually make changes, just test that the patch applies.
+	 * This is the equivalent of `git apply --check`.
+	 */
+	GIT_APPLY_CHECK = (1 << 0),
+} git_apply_flags_t;
+
 /**
  * Apply options structure
  *
  * Initialize with `GIT_APPLY_OPTIONS_INIT`. Alternatively, you can
- * use `git_apply_init_options`.
+ * use `git_apply_options_init`.
  *
  * @see git_apply_to_tree, git_apply
  */
 typedef struct {
-	unsigned int version;
+	unsigned int version; /**< The version */
 
+	/** When applying a patch, callback that will be made per delta (file). */
 	git_apply_delta_cb delta_cb;
+
+	/** When applying a patch, callback that will be made per hunk. */
 	git_apply_hunk_cb hunk_cb;
+
+	/** Payload passed to both delta_cb & hunk_cb. */
 	void *payload;
+
+	/** Bitmask of git_apply_flags_t */
+	unsigned int flags;
 } git_apply_options;
 
 #define GIT_APPLY_OPTIONS_VERSION 1
 #define GIT_APPLY_OPTIONS_INIT {GIT_APPLY_OPTIONS_VERSION}
 
+GIT_EXTERN(int) git_apply_options_init(git_apply_options *opts, unsigned int version);
+
 /**
  * Apply a `git_diff` to a `git_tree`, and return the resulting image
  * as an index.
@@ -81,6 +100,7 @@ typedef struct {
  * @param preimage the tree to apply the diff to
  * @param diff the diff to apply
  * @param options the options for the apply (or null for defaults)
+ * @return 0 or an error code
  */
 GIT_EXTERN(int) git_apply_to_tree(
 	git_index **out,
@@ -89,6 +109,7 @@ GIT_EXTERN(int) git_apply_to_tree(
 	git_diff *diff,
 	const git_apply_options *options);
 
+/** Possible application locations for git_apply */
 typedef enum {
 	/**
 	 * Apply the patch to the workdir, leaving the index untouched.
@@ -117,6 +138,7 @@ typedef enum {
  * @param diff the diff to apply
  * @param location the location to apply (workdir, index or both)
  * @param options the options for the apply (or null for defaults)
+ * @return 0 or an error code
  */
 GIT_EXTERN(int) git_apply(
 	git_repository *repo,

data/vendor/libgit2/include/git2/attr.h

@@ -30,7 +30,7 @@ GIT_BEGIN_DECL
  * Then for file `xyz.c` looking up attribute "foo" gives a value for
  * which `GIT_ATTR_TRUE(value)` is true.
  */
-#define GIT_ATTR_TRUE(attr)	(git_attr_value(attr) == GIT_ATTR_TRUE_T)
+#define GIT_ATTR_IS_TRUE(attr)	(git_attr_value(attr) == GIT_ATTR_VALUE_TRUE)
 
 /**
  * GIT_ATTR_FALSE checks if an attribute is set off.  In core git
@@ -44,7 +44,7 @@ GIT_BEGIN_DECL
  * Then for file `zyx.h` looking up attribute "foo" gives a value for
  * which `GIT_ATTR_FALSE(value)` is true.
  */
-#define GIT_ATTR_FALSE(attr) (git_attr_value(attr) == GIT_ATTR_FALSE_T)
+#define GIT_ATTR_IS_FALSE(attr) (git_attr_value(attr) == GIT_ATTR_VALUE_FALSE)
 
 /**
  * GIT_ATTR_UNSPECIFIED checks if an attribute is unspecified.  This
@@ -62,7 +62,7 @@ GIT_BEGIN_DECL
  * file `onefile.rb` or looking up "bar" on any file will all give
  * `GIT_ATTR_UNSPECIFIED(value)` of true.
  */
-#define GIT_ATTR_UNSPECIFIED(attr) (git_attr_value(attr) == GIT_ATTR_UNSPECIFIED_T)
+#define GIT_ATTR_IS_UNSPECIFIED(attr) (git_attr_value(attr) == GIT_ATTR_VALUE_UNSPECIFIED)
 
 /**
  * GIT_ATTR_HAS_VALUE checks if an attribute is set to a value (as
@@ -74,17 +74,17 @@ GIT_BEGIN_DECL
  * Given this, looking up "eol" for `onefile.txt` will give back the
  * string "lf" and `GIT_ATTR_SET_TO_VALUE(attr)` will return true.
  */
-#define GIT_ATTR_HAS_VALUE(attr) (git_attr_value(attr) == GIT_ATTR_VALUE_T)
+#define GIT_ATTR_HAS_VALUE(attr) (git_attr_value(attr) == GIT_ATTR_VALUE_STRING)
 
 /**
  * Possible states for an attribute
  */
 typedef enum {
-	GIT_ATTR_UNSPECIFIED_T = 0, /**< The attribute has been left unspecified */
-	GIT_ATTR_TRUE_T,  /**< The attribute has been set */
-	GIT_ATTR_FALSE_T, /**< The attribute has been unset */
-	GIT_ATTR_VALUE_T, /**< This attribute has a value */
-} git_attr_t;
+	GIT_ATTR_VALUE_UNSPECIFIED = 0, /**< The attribute has been left unspecified */
+	GIT_ATTR_VALUE_TRUE,   /**< The attribute has been set */
+	GIT_ATTR_VALUE_FALSE,  /**< The attribute has been unset */
+	GIT_ATTR_VALUE_STRING, /**< This attribute has a value */
+} git_attr_value_t;
 
 /**
  * Return the value type for a given attribute.
@@ -99,7 +99,7 @@ typedef enum {
  * @param attr The attribute
  * @return the value type for the attribute
  */
-GIT_EXTERN(git_attr_t) git_attr_value(const char *attr);
+GIT_EXTERN(git_attr_value_t) git_attr_value(const char *attr);
 
 /**
  * Check attribute flags: Reading values from index and working directory.
@@ -119,13 +119,20 @@ GIT_EXTERN(git_attr_t) git_attr_value(const char *attr);
 #define GIT_ATTR_CHECK_INDEX_ONLY		2
 
 /**
- * Check attribute flags: Using the system attributes file.
+ * Check attribute flags: controlling extended attribute behavior.
  *
  * Normally, attribute checks include looking in the /etc (or system
  * equivalent) directory for a `gitattributes` file.  Passing this
  * flag will cause attribute checks to ignore that file.
+ * equivalent) directory for a `gitattributes` file.  Passing the
+ * `GIT_ATTR_CHECK_NO_SYSTEM` flag will cause attribute checks to
+ * ignore that file.
+ *
+ * Passing the `GIT_ATTR_CHECK_INCLUDE_HEAD` flag will use attributes
+ * from a `.gitattributes` file in the repository at the HEAD revision.
  */
-#define GIT_ATTR_CHECK_NO_SYSTEM		(1 << 2)
+#define GIT_ATTR_CHECK_NO_SYSTEM        (1 << 2)
+#define GIT_ATTR_CHECK_INCLUDE_HEAD     (1 << 3)
 
 /**
  * Look up the value of one git attribute for path.
@@ -231,8 +238,11 @@ GIT_EXTERN(int) git_attr_foreach(
  * disk no longer match the cached contents of memory.  This will cause
  * the attributes files to be reloaded the next time that an attribute
  * access function is called.
+ *
+ * @param repo The repository containing the gitattributes cache
+ * @return 0 on success, or an error code
  */
-GIT_EXTERN(void) git_attr_cache_flush(
+GIT_EXTERN(int) git_attr_cache_flush(
 	git_repository *repo);
 
 /**