rubygems-update 3.1.6 → 3.4.10

data/bundler/man/gemfile.5.txt

@@ -1,649 +0,0 @@
-GEMFILE(5)							    GEMFILE(5)
-
-
-
-NAME
-       Gemfile - A format for describing gem dependencies for Ruby programs
-
-SYNOPSIS
-       A Gemfile describes the gem dependencies required to execute associated
-       Ruby code.
-
-       Place the Gemfile in the root of the directory containing  the  associ-
-       ated  code.  For instance, in a Rails application, place the Gemfile in
-       the same directory as the Rakefile.
-
-SYNTAX
-       A Gemfile is evaluated as Ruby code, in a context which makes available
-       a number of methods used to describe the gem requirements.
-
-GLOBAL SOURCES
-       At the top of the Gemfile, add a line for the Rubygems source that con-
-       tains the gems listed in the Gemfile.
-
-
-
-	   source "https://rubygems.org"
-
-
-
-       It is possible, but not recommended as of Bundler 1.7, to add  multiple
-       global  source  lines.  Each  of these sources MUST be a valid Rubygems
-       repository.
-
-       Sources are checked for gems  following	the  heuristics  described  in
-       SOURCE  PRIORITY.  If  a  gem  is found in more than one global source,
-       Bundler will print a warning after installing the gem indicating  which
-       source  was used, and listing the other sources where the gem is avail-
-       able. A specific source can be selected for gems that  need  to	use  a
-       non-standard repository, suppressing this warning, by using the :source
-       option or a source block.
-
-   CREDENTIALS
-       Some gem sources require a username and password. Use bundle  config(1)
-       bundle-config.1.html  to  set  the username and password for any of the
-       sources that need it. The command must be run  once  on	each  computer
-       that  will  install  the  Gemfile,  but this keeps the credentials from
-       being stored in plain text in version control.
-
-
-
-	   bundle config gems.example.com user:password
-
-
-
-       For some sources, like a company Gemfury account, it may be  easier  to
-       include the credentials in the Gemfile as part of the source URL.
-
-
-
-	   source "https://user:password@gems.example.com"
-
-
-
-       Credentials in the source URL will take precedence over credentials set
-       using config.
-
-RUBY
-       If your application requires a specific Ruby version or engine, specify
-       your  requirements using the ruby method, with the following arguments.
-       All parameters are OPTIONAL unless otherwise specified.
-
-   VERSION (required)
-       The version of Ruby that your application requires. If your application
-       requires  an  alternate	Ruby  engine, such as JRuby, Rubinius or Truf-
-       fleRuby, this should be the Ruby version that the engine is  compatible
-       with.
-
-
-
-	   ruby "1.9.3"
-
-
-
-   ENGINE
-       Each  application may specify a Ruby engine. If an engine is specified,
-       an engine version must also be specified.
-
-       What exactly is an Engine? - A Ruby engine is an implementation of  the
-       Ruby language.
-
-       o   For	background:  the  reference  or original implementation of the
-	   Ruby  programming  language	is  called  Matz's  Ruby   Interpreter
-	   https://en.wikipedia.org/wiki/Ruby_MRI,  or	MRI for short. This is
-	   named after Ruby creator Yukihiro Matsumoto, also  known  as  Matz.
-	   MRI	is also known as CRuby, because it is written in C. MRI is the
-	   most widely used Ruby engine.
-
-       o   Other implementations https://www.ruby-lang.org/en/about/  of  Ruby
-	   exist. Some of the more well-known implementations include Rubinius
-	   https://rubinius.com/, and JRuby http://jruby.org/. Rubinius is  an
-	   alternative	implementation	of  Ruby  written in Ruby. JRuby is an
-	   implementation of Ruby on the JVM, short for Java Virtual Machine.
-
-
-
-   ENGINE VERSION
-       Each application may specify a Ruby engine version. If an  engine  ver-
-       sion  is  specified, an engine must also be specified. If the engine is
-       "ruby" the engine version specified must match the Ruby version.
-
-
-
-	   ruby "1.8.7", :engine => "jruby", :engine_version => "1.6.7"
-
-
-
-   PATCHLEVEL
-       Each application may specify a Ruby patchlevel.
-
-
-
-	   ruby "2.0.0", :patchlevel => "247"
-
-
-
-GEMS
-       Specify gem requirements using the gem method, with the following argu-
-       ments. All parameters are OPTIONAL unless otherwise specified.
-
-   NAME (required)
-       For each gem requirement, list a single gem line.
-
-
-
-	   gem "nokogiri"
-
-
-
-   VERSION
-       Each gem MAY have one or more version specifiers.
-
-
-
-	   gem "nokogiri", ">= 1.4.2"
-	   gem "RedCloth", ">= 4.1.0", "< 4.2.0"
-
-
-
-   REQUIRE AS
-       Each  gem  MAY specify files that should be used when autorequiring via
-       Bundler.require. You may pass an array with multiple files or  true  if
-       file  you  want	required  has same name as gem or false to prevent any
-       file from being autorequired.
-
-
-
-	   gem "redis", :require => ["redis/connection/hiredis", "redis"]
-	   gem "webmock", :require => false
-	   gem "byebug", :require => true
-
-
-
-       The argument defaults to the name of the gem. For  example,  these  are
-       identical:
-
-
-
-	   gem "nokogiri"
-	   gem "nokogiri", :require => "nokogiri"
-	   gem "nokogiri", :require => true
-
-
-
-   GROUPS
-       Each  gem  MAY  specify	membership in one or more groups. Any gem that
-       does not specify membership in any  group  is  placed  in  the  default
-       group.
-
-
-
-	   gem "rspec", :group => :test
-	   gem "wirble", :groups => [:development, :test]
-
-
-
-       The  Bundler  runtime  allows  its  two main methods, Bundler.setup and
-       Bundler.require, to limit their impact to particular groups.
-
-
-
-	   # setup adds gems to Ruby's load path
-	   Bundler.setup		    # defaults to all groups
-	   require "bundler/setup"	    # same as Bundler.setup
-	   Bundler.setup(:default)	    # only set up the _default_ group
-	   Bundler.setup(:test) 	    # only set up the _test_ group (but `not` _default_)
-	   Bundler.setup(:default, :test)   # set up the _default_ and _test_ groups, but no others
-
-	   # require requires all of the gems in the specified groups
-	   Bundler.require		    # defaults to the _default_ group
-	   Bundler.require(:default)	    # identical
-	   Bundler.require(:default, :test) # requires the _default_ and _test_ groups
-	   Bundler.require(:test)	    # requires the _test_ group
-
-
-
-       The Bundler CLI allows you to specify a list of groups whose gems  bun-
-       dle install should not install with the without configuration.
-
-       To  specify  multiple  groups to ignore, specify a list of groups sepa-
-       rated by spaces.
-
-
-
-	   bundle config set without test
-	   bundle config set without development test
-
-
-
-       Also, calling Bundler.setup with  no  parameters,  or  calling  require
-       "bundler/setup"	will setup all groups except for the ones you excluded
-       via --without (since they are not available).
-
-       Note that on bundle install, bundler downloads and evaluates all  gems,
-       in  order to create a single canonical list of all of the required gems
-       and their dependencies. This means that you cannot list different  ver-
-       sions  of  the  same  gems  in  different groups. For more details, see
-       Understanding Bundler https://bundler.io/rationale.html.
-
-   PLATFORMS
-       If a gem should only be used in a particular platform or set  of  plat-
-       forms,  you  can  specify  them. Platforms are essentially identical to
-       groups, except that you do not need to use the  --without  install-time
-       flag to exclude groups of gems for other platforms.
-
-       There are a number of Gemfile platforms:
-
-       ruby   C Ruby (MRI), Rubinius or TruffleRuby, but NOT Windows
-
-       mri    Same as ruby, but only C Ruby (MRI)
-
-       mingw  Windows 32 bit 'mingw32' platform (aka RubyInstaller)
-
-       x64_mingw
-	      Windows 64 bit 'mingw32' platform (aka RubyInstaller x64)
-
-       rbx    Rubinius
-
-       jruby  JRuby
-
-       truffleruby
-	      TruffleRuby
-
-       mswin  Windows
-
-       You  can  restrict  further  by	platform and version for all platforms
-       except for rbx, jruby, truffleruby and mswin.
-
-       To specify a version in addition to a platform, append the version num-
-       ber without the delimiter to the platform. For example, to specify that
-       a gem should only be used on platforms with Ruby 2.3, use:
-
-
-
-	   ruby_23
-
-
-
-       The full list of platforms and supported versions includes:
-
-       ruby   1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
-
-       mri    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
-
-       mingw  1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
-
-       x64_mingw
-	      2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6
-
-       As with groups, you can specify one or more platforms:
-
-
-
-	   gem "weakling",   :platforms => :jruby
-	   gem "ruby-debug", :platforms => :mri_18
-	   gem "nokogiri",   :platforms => [:mri_18, :jruby]
-
-
-
-       All operations involving groups (bundle install	bundle-install.1.html,
-       Bundler.setup,  Bundler.require)  behave  exactly  the  same  as if any
-       groups not matching the current platform were explicitly excluded.
-
-   SOURCE
-       You can select an alternate Rubygems repository for  a  gem  using  the
-       ':source' option.
-
-
-
-	   gem "some_internal_gem", :source => "https://gems.example.com"
-
-
-
-       This  forces  the  gem  to  be  loaded from this source and ignores any
-       global sources declared at the top level of the file. If the  gem  does
-       not exist in this source, it will not be installed.
-
-       Bundler will search for child dependencies of this gem by first looking
-       in the source selected for the parent, but if they are not found there,
-       it  will  fall  back  on global sources using the ordering described in
-       SOURCE PRIORITY.
-
-       Selecting a specific source repository this  way  also  suppresses  the
-       ambiguous gem warning described above in GLOBAL SOURCES (#source).
-
-       Using  the  :source  option  for  an individual gem will also make that
-       source available as a possible global source for any other  gems  which
-       do  not	specify explicit sources. Thus, when adding gems with explicit
-       sources, it is recommended that you also ensure all other gems  in  the
-       Gemfile are using explicit sources.
-
-   GIT
-       If necessary, you can specify that a gem is located at a particular git
-       repository using the :git parameter. The repository can be accessed via
-       several protocols:
-
-       HTTP(S)
-	      gem "rails", :git => "https://github.com/rails/rails.git"
-
-       SSH    gem "rails", :git => "git@github.com:rails/rails.git"
-
-       git    gem "rails", :git => "git://github.com/rails/rails.git"
-
-       If using SSH, the user that you use to run bundle install MUST have the
-       appropriate keys available in their $HOME/.ssh.
-
-       NOTE: http:// and git:// URLs should be avoided	if  at	all  possible.
-       These  protocols  are  unauthenticated, so a man-in-the-middle attacker
-       can deliver malicious code and compromise your system.  HTTPS  and  SSH
-       are strongly preferred.
-
-       The  group,  platforms,	and  require  options are available and behave
-       exactly the same as they would for a normal gem.
-
-       A git repository SHOULD have at least one file,	at  the  root  of  the
-       directory  containing  the  gem, with the extension .gemspec. This file
-       MUST contain a valid gem specification, as expected by  the  gem  build
-       command.
-
-       If  a  git repository does not have a .gemspec, bundler will attempt to
-       create one, but it will not contain any dependencies, executables, or C
-       extension  compilation  instructions. As a result, it may fail to prop-
-       erly integrate into your application.
-
-       If a git repository does have a .gemspec for the gem  you  attached  it
-       to,  a version specifier, if provided, means that the git repository is
-       only valid if the .gemspec specifies a  version	matching  the  version
-       specifier. If not, bundler will print a warning.
-
-
-
-	   gem "rails", "2.3.8", :git => "https://github.com/rails/rails.git"
-	   # bundle install will fail, because the .gemspec in the rails
-	   # repository's master branch specifies version 3.0.0
-
-
-
-       If  a  git repository does not have a .gemspec for the gem you attached
-       it to, a version specifier MUST be provided. Bundler will use this ver-
-       sion in the simple .gemspec it creates.
-
-       Git repositories support a number of additional options.
-
-       branch, tag, and ref
-	      You  MUST only specify at most one of these options. The default
-	      is :branch => "master". For example:
-
-	      gem  "rails",  :git   =>	 "https://github.com/rails/rails.git",
-	      :branch => "5-0-stable"
-
-	      gem  "rails", :git => "https://github.com/rails/rails.git", :tag
-	      => "v5.0.0"
-
-	      gem "rails", :git => "https://github.com/rails/rails.git",  :ref
-	      => "4aded"
-
-       submodules
-	      For	   reference,	       a	 git	     submodule
-	      https://git-scm.com/book/en/v2/Git-Tools-Submodules   lets   you
-	      have  another  git repository within a subfolder of your reposi-
-	      tory. Specify :submodules => true to cause bundler to expand any
-	      submodules included in the git repository
-
-       If  a  git repository contains multiple .gemspecs, each .gemspec repre-
-       sents a gem located at the same place in the file system as  the  .gem-
-       spec.
-
-
-
-	   |~rails		     [git root]
-	   | |-rails.gemspec	     [rails gem located here]
-	   |~actionpack
-	   | |-actionpack.gemspec    [actionpack gem located here]
-	   |~activesupport
-	   | |-activesupport.gemspec [activesupport gem located here]
-	   |...
-
-
-
-       To  install  a  gem located in a git repository, bundler changes to the
-       directory containing the gemspec, runs gem build name.gemspec and  then
-       installs the resulting gem. The gem build command, which comes standard
-       with Rubygems, evaluates the .gemspec in the context of	the  directory
-       in which it is located.
-
-   GIT SOURCE
-       A  custom  git source can be defined via the git_source method. Provide
-       the source's name as an argument, and a block which receives  a	single
-       argument  and  interpolates  it	into  a string to return the full repo
-       address:
-
-
-
-	   git_source(:stash){ |repo_name| "https://stash.corp.acme.pl/#{repo_name}.git" }
-	   gem 'rails', :stash => 'forks/rails'
-
-
-
-       In addition, if you wish to choose a specific branch:
-
-
-
-	   gem "rails", :stash => "forks/rails", :branch => "branch_name"
-
-
-
-   GITHUB
-       NOTE: This shorthand should be avoided until Bundler 2.0, since it cur-
-       rently expands to an insecure git:// URL. This allows a man-in-the-mid-
-       dle attacker to compromise your system.
-
-       If the git repository you want to use is hosted on GitHub and  is  pub-
-       lic,  you  can use the :github shorthand to specify the github username
-       and repository name (without  the  trailing  ".git"),  separated  by  a
-       slash.  If  both the username and repository name are the same, you can
-       omit one.
-
-
-
-	   gem "rails", :github => "rails/rails"
-	   gem "rails", :github => "rails"
-
-
-
-       Are both equivalent to
-
-
-
-	   gem "rails", :git => "git://github.com/rails/rails.git"
-
-
-
-       Since the github method is a specialization of git_source, it accepts a
-       :branch named argument.
-
-   GIST
-       If the git repository you want to use is hosted as a Github Gist and is
-       public, you can use the :gist shorthand to specify the gist  identifier
-       (without the trailing ".git").
-
-
-
-	   gem "the_hatch", :gist => "4815162342"
-
-
-
-       Is equivalent to:
-
-
-
-	   gem "the_hatch", :git => "https://gist.github.com/4815162342.git"
-
-
-
-       Since  the  gist method is a specialization of git_source, it accepts a
-       :branch named argument.
-
-   BITBUCKET
-       If the git repository you want to use is hosted	on  Bitbucket  and  is
-       public,	you  can use the :bitbucket shorthand to specify the bitbucket
-       username and repository name (without the trailing  ".git"),  separated
-       by  a slash. If both the username and repository name are the same, you
-       can omit one.
-
-
-
-	   gem "rails", :bitbucket => "rails/rails"
-	   gem "rails", :bitbucket => "rails"
-
-
-
-       Are both equivalent to
-
-
-
-	   gem "rails", :git => "https://rails@bitbucket.org/rails/rails.git"
-
-
-
-       Since the bitbucket  method  is	a  specialization  of  git_source,  it
-       accepts a :branch named argument.
-
-   PATH
-       You  can  specify that a gem is located in a particular location on the
-       file system. Relative paths are resolved relative to the directory con-
-       taining the Gemfile.
-
-       Similar	to the semantics of the :git option, the :path option requires
-       that the directory in question either contains a .gemspec for the  gem,
-       or that you specify an explicit version that bundler should use.
-
-       Unlike  :git,  bundler does not compile C extensions for gems specified
-       as paths.
-
-
-
-	   gem "rails", :path => "vendor/rails"
-
-
-
-       If you would like to use multiple local gems directly from the filesys-
-       tem,  you can set a global path option to the path containing the gem's
-       files. This will automatically load gemspec files from subdirectories.
-
-
-
-	   path 'components' do
-	     gem 'admin_ui'
-	     gem 'public_ui'
-	   end
-
-
-
-BLOCK FORM OF SOURCE, GIT, PATH, GROUP and PLATFORMS
-       The :source, :git, :path, :group, and :platforms options may be applied
-       to a group of gems by using block form.
-
-
-
-	   source "https://gems.example.com" do
-	     gem "some_internal_gem"
-	     gem "another_internal_gem"
-	   end
-
-	   git "https://github.com/rails/rails.git" do
-	     gem "activesupport"
-	     gem "actionpack"
-	   end
-
-	   platforms :ruby do
-	     gem "ruby-debug"
-	     gem "sqlite3"
-	   end
-
-	   group :development, :optional => true do
-	     gem "wirble"
-	     gem "faker"
-	   end
-
-
-
-       In  the	case of the group block form the :optional option can be given
-       to prevent a group from being installed unless  listed  in  the	--with
-       option given to the bundle install command.
-
-       In  the	case of the git block form, the :ref, :branch, :tag, and :sub-
-       modules options may be passed to the git method, and all  gems  in  the
-       block will inherit those options.
-
-       The  presence  of  a  source  block in a Gemfile also makes that source
-       available as a possible global source for any other gems which  do  not
-       specify explicit sources. Thus, when defining source blocks, it is rec-
-       ommended that you also ensure all other gems in the Gemfile  are  using
-       explicit  sources,  either  via	source blocks or :source directives on
-       individual gems.
-
-INSTALL_IF
-       The install_if method allows gems to be installed based on  a  proc  or
-       lambda.	This  is  especially useful for optional gems that can only be
-       used if certain software is installed or some other conditions are met.
-
-
-
-	   install_if -> { RUBY_PLATFORM =~ /darwin/ } do
-	     gem "pasteboard"
-	   end
-
-
-
-GEMSPEC
-       The .gemspec  http://guides.rubygems.org/specification-reference/  file
-       is where you provide metadata about your gem to Rubygems. Some required
-       Gemspec attributes include the name, description, and homepage of  your
-       gem.  This is also where you specify the dependencies your gem needs to
-       run.
-
-       If you wish to use Bundler to help install dependencies for a gem while
-       it  is being developed, use the gemspec method to pull in the dependen-
-       cies listed in the .gemspec file.
-
-       The gemspec method adds any runtime dependencies as gem requirements in
-       the  default  group.  It  also  adds  development  dependencies	as gem
-       requirements in the development group. Finally, it adds a gem  require-
-       ment on your project (:path => '.'). In conjunction with Bundler.setup,
-       this allows you to require project files in your test code as you would
-       if  the	project  were  installed as a gem; you need not manipulate the
-       load path manually or require project files via relative paths.
-
-       The gemspec method supports optional :path, :glob, :name, and :develop-
-       ment_group options, which control where bundler looks for the .gemspec,
-       the glob it uses to look for the  gemspec  (defaults  to:  "{,,/*}.gem-
-       spec"),	what named .gemspec it uses (if more than one is present), and
-       which group development dependencies are included in.
-
-       When a gemspec dependency encounters version conflicts  during  resolu-
-       tion,  the  local  version under development will always be selected --
-       even if there are remote versions that better match other  requirements
-       for the gemspec gem.
-
-SOURCE PRIORITY
-       When  attempting  to locate a gem to satisfy a gem requirement, bundler
-       uses the following priority order:
-
-       1.  The source explicitly attached to the gem (using :source, :path, or
-	   :git)
-
-       2.  For implicit gems (dependencies of explicit gems), any source, git,
-	   or path repository declared on the parent. This results in  bundler
-	   prioritizing  the  ActiveSupport  gem from the Rails git repository
-	   over ones from rubygems.org
-
-       3.  The sources specified  via  global  source  lines,  searching  each
-	   source in your Gemfile from last added to first added.
-
-
-
-
-
-
-				 January 2020			    GEMFILE(5)

data/lib/rubygems/psych_additions.rb

@@ -1,10 +0,0 @@
-# frozen_string_literal: true
-# This exists just to satisfy bugs in marshal'd gemspecs that
-# contain a reference to YAML::PrivateType. We prune these out
-# in Specification._load, but if we don't have the constant, Marshal
-# blows up.
-
-module Psych # :nodoc:
-  class PrivateType # :nodoc:
-  end
-end