rubygems-update 3.0.9 → 3.1.0.pre1

data/bundler/man/bundle-outdated.1.txt

@@ -0,0 +1,131 @@
+BUNDLE-OUTDATED(1)					    BUNDLE-OUTDATED(1)
+
+
+
+NAME
+       bundle-outdated - List installed gems with newer versions available
+
+SYNOPSIS
+       bundle	outdated   [GEM]   [--local]   [--pre]	[--source]  [--strict]
+       [--parseable	|     --porcelain]     [--group=GROUP]	    [--groups]
+       [--update-strict]  [--patch|--minor|--major]  [--filter-major]  [--fil-
+       ter-minor] [--filter-patch] [--only-explicit]
+
+DESCRIPTION
+       Outdated lists the names and versions of gems that have a newer version
+       available  in  the given source. Calling outdated with [GEM [GEM]] will
+       only check for newer versions of the given gems.  Prerelease  gems  are
+       ignored by default. If your gems are up to date, Bundler will exit with
+       a status of 0. Otherwise, it will exit 1.
+
+OPTIONS
+       --local
+	      Do not attempt to fetch gems remotely  and  use  the  gem  cache
+	      instead.
+
+       --pre  Check for newer pre-release gems.
+
+       --source
+	      Check against a specific source.
+
+       --strict
+	      Only list newer versions allowed by your Gemfile requirements.
+
+       --parseable, --porcelain
+	      Use minimal formatting for more parseable output.
+
+       --group
+	      List gems from a specific group.
+
+       --groups
+	      List gems organized by groups.
+
+       --update-strict
+	      Strict  conservative  resolution,  do  not  allow  any gem to be
+	      updated past latest --patch | --minor| --major.
+
+       --minor
+	      Prefer updating only to next minor version.
+
+       --major
+	      Prefer updating to next major version (default).
+
+       --patch
+	      Prefer updating only to next patch version.
+
+       --filter-major
+	      Only list major newer versions.
+
+       --filter-minor
+	      Only list minor newer versions.
+
+       --filter-patch
+	      Only list patch newer versions.
+
+       --only-explicit
+	      Only list gems specified in your Gemfile,  not  their  dependen-
+	      cies.
+
+PATCH LEVEL OPTIONS
+       See bundle update(1) bundle-update.1.html for details.
+
+       One  difference	between  the  patch level options in bundle update and
+       here is the --strict option. --strict was already an option on outdated
+       before the patch level options were added. --strict wasn't altered, and
+       the --update-strict option on outdated reflects what --strict  does  on
+       bundle update.
+
+FILTERING OUTPUT
+       The  3  filtering  options  do  not  affect the resolution of versions,
+       merely what versions are shown in the output.
+
+       If the regular output shows the following:
+
+
+
+	   * faker (newest 1.6.6, installed 1.6.5, requested ~> 1.4) in groups "development, test"
+	   * hashie (newest 3.4.6, installed 1.2.0, requested = 1.2.0) in groups "default"
+	   * headless (newest 2.3.1, installed 2.2.3) in groups "test"
+
+
+
+       --filter-major would only show:
+
+
+
+	   * hashie (newest 3.4.6, installed 1.2.0, requested = 1.2.0) in groups "default"
+
+
+
+       --filter-minor would only show:
+
+
+
+	   * headless (newest 2.3.1, installed 2.2.3) in groups "test"
+
+
+
+       --filter-patch would only show:
+
+
+
+	   * faker (newest 1.6.6, installed 1.6.5, requested ~> 1.4) in groups "development, test"
+
+
+
+       Filter options can be combined. --filter-minor and --filter-patch would
+       show:
+
+
+
+	   * faker (newest 1.6.6, installed 1.6.5, requested ~> 1.4) in groups "development, test"
+	   * headless (newest 2.3.1, installed 2.2.3) in groups "test"
+
+
+
+       Combining  all three filter options would be the same result as provid-
+       ing none of them.
+
+
+
+				September 2019		    BUNDLE-OUTDATED(1)

data/bundler/man/bundle-package.1

@@ -0,0 +1,55 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-PACKAGE" "1" "September 2019" "" ""
+.
+.SH "NAME"
+\fBbundle\-package\fR \- Package your needed \fB\.gem\fR files into your application
+.
+.SH "SYNOPSIS"
+\fBbundle package\fR
+.
+.SH "DESCRIPTION"
+Copy all of the \fB\.gem\fR files needed to run the application into the \fBvendor/cache\fR directory\. In the future, when running [bundle install(1)][bundle\-install], use the gems in the cache in preference to the ones on \fBrubygems\.org\fR\.
+.
+.SH "GIT AND PATH GEMS"
+Since Bundler 1\.2, the \fBbundle package\fR command can also package \fB:git\fR and \fB:path\fR dependencies besides \.gem files\. This needs to be explicitly enabled via the \fB\-\-all\fR option\. Once used, the \fB\-\-all\fR option will be remembered\.
+.
+.SH "SUPPORT FOR MULTIPLE PLATFORMS"
+When using gems that have different packages for different platforms, Bundler 1\.8 and newer support caching of gems for other platforms where the Gemfile has been resolved (i\.e\. present in the lockfile) in \fBvendor/cache\fR\. This needs to be enabled via the \fB\-\-all\-platforms\fR option\. This setting will be remembered in your local bundler configuration\.
+.
+.SH "REMOTE FETCHING"
+By default, if you run \fBbundle install(1)\fR](bundle\-install\.1\.html) after running bundle package(1) \fIbundle\-package\.1\.html\fR, bundler will still connect to \fBrubygems\.org\fR to check whether a platform\-specific gem exists for any of the gems in \fBvendor/cache\fR\.
+.
+.P
+For instance, consider this Gemfile(5):
+.
+.IP "" 4
+.
+.nf
+
+source "https://rubygems\.org"
+
+gem "nokogiri"
+.
+.fi
+.
+.IP "" 0
+.
+.P
+If you run \fBbundle package\fR under C Ruby, bundler will retrieve the version of \fBnokogiri\fR for the \fB"ruby"\fR platform\. If you deploy to JRuby and run \fBbundle install\fR, bundler is forced to check to see whether a \fB"java"\fR platformed \fBnokogiri\fR exists\.
+.
+.P
+Even though the \fBnokogiri\fR gem for the Ruby platform is \fItechnically\fR acceptable on JRuby, it has a C extension that does not run on JRuby\. As a result, bundler will, by default, still connect to \fBrubygems\.org\fR to check whether it has a version of one of your gems more specific to your platform\.
+.
+.P
+This problem is also not limited to the \fB"java"\fR platform\. A similar (common) problem can happen when developing on Windows and deploying to Linux, or even when developing on OSX and deploying to Linux\.
+.
+.P
+If you know for sure that the gems packaged in \fBvendor/cache\fR are appropriate for the platform you are on, you can run \fBbundle install \-\-local\fR to skip checking for more appropriate gems, and use the ones in \fBvendor/cache\fR\.
+.
+.P
+One way to be sure that you have the right platformed versions of all your gems is to run \fBbundle package\fR on an identical machine and check in the gems\. For instance, you can run \fBbundle package\fR on an identical staging box during your staging process, and check in the \fBvendor/cache\fR before deploying to production\.
+.
+.P
+By default, bundle package(1) \fIbundle\-package\.1\.html\fR fetches and also installs the gems to the default location\. To package the dependencies to \fBvendor/cache\fR without installing them to the local install location, you can run \fBbundle package \-\-no\-install\fR\.

data/bundler/man/bundle-package.1.txt

@@ -0,0 +1,79 @@
+BUNDLE-PACKAGE(1)					     BUNDLE-PACKAGE(1)
+
+
+
+NAME
+       bundle-package - Package your needed .gem files into your application
+
+SYNOPSIS
+       bundle package
+
+DESCRIPTION
+       Copy  all of the .gem files needed to run the application into the ven-
+       dor/cache   directory.	In   the   future,   when   running    [bundle
+       install(1)][bundle-install], use the gems in the cache in preference to
+       the ones on rubygems.org.
+
+GIT AND PATH GEMS
+       Since Bundler 1.2, the bundle package command can also package :git and
+       :path  dependencies  besides  .gem  files.  This needs to be explicitly
+       enabled via the --all option. Once  used,  the  --all  option  will  be
+       remembered.
+
+SUPPORT FOR MULTIPLE PLATFORMS
+       When  using  gems that have different packages for different platforms,
+       Bundler 1.8 and newer support caching of gems for other platforms where
+       the  Gemfile  has  been resolved (i.e. present in the lockfile) in ven-
+       dor/cache. This needs to be enabled  via  the  --all-platforms  option.
+       This setting will be remembered in your local bundler configuration.
+
+REMOTE FETCHING
+       By  default, if you run bundle install(1)](bundle-install.1.html) after
+       running bundle package(1)  bundle-package.1.html,  bundler  will  still
+       connect to rubygems.org to check whether a platform-specific gem exists
+       for any of the gems in vendor/cache.
+
+       For instance, consider this Gemfile(5):
+
+
+
+	   source "https://rubygems.org"
+
+	   gem "nokogiri"
+
+
+
+       If you run bundle package under C Ruby, bundler will retrieve the  ver-
+       sion  of  nokogiri  for the "ruby" platform. If you deploy to JRuby and
+       run bundle install, bundler is forced to check to see whether a	"java"
+       platformed nokogiri exists.
+
+       Even  though  the  nokogiri  gem  for  the Ruby platform is technically
+       acceptable on JRuby, it has a C extension that does not run  on	JRuby.
+       As a result, bundler will, by default, still connect to rubygems.org to
+       check whether it has a version of one of your  gems  more  specific  to
+       your platform.
+
+       This  problem  is  also	not  limited to the "java" platform. A similar
+       (common) problem can happen when developing on Windows and deploying to
+       Linux, or even when developing on OSX and deploying to Linux.
+
+       If  you know for sure that the gems packaged in vendor/cache are appro-
+       priate for the platform you are on, you can run bundle install  --local
+       to  skip  checking  for more appropriate gems, and use the ones in ven-
+       dor/cache.
+
+       One way to be sure that you have the right platformed versions  of  all
+       your gems is to run bundle package on an identical machine and check in
+       the gems. For instance, you can run  bundle  package  on  an  identical
+       staging	box during your staging process, and check in the vendor/cache
+       before deploying to production.
+
+       By default, bundle package(1) bundle-package.1.html  fetches  and  also
+       installs  the gems to the default location. To package the dependencies
+       to vendor/cache without installing them to the local install  location,
+       you can run bundle package --no-install.
+
+
+
+				September 2019		     BUNDLE-PACKAGE(1)

data/bundler/man/bundle-platform.1

@@ -0,0 +1,61 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-PLATFORM" "1" "September 2019" "" ""
+.
+.SH "NAME"
+\fBbundle\-platform\fR \- Displays platform compatibility information
+.
+.SH "SYNOPSIS"
+\fBbundle platform\fR [\-\-ruby]
+.
+.SH "DESCRIPTION"
+\fBplatform\fR will display information from your Gemfile, Gemfile\.lock, and Ruby VM about your platform\.
+.
+.P
+For instance, using this Gemfile(5):
+.
+.IP "" 4
+.
+.nf
+
+source "https://rubygems\.org"
+
+ruby "1\.9\.3"
+
+gem "rack"
+.
+.fi
+.
+.IP "" 0
+.
+.P
+If you run \fBbundle platform\fR on Ruby 1\.9\.3, it will display the following output:
+.
+.IP "" 4
+.
+.nf
+
+Your platform is: x86_64\-linux
+
+Your app has gems that work on these platforms:
+* ruby
+
+Your Gemfile specifies a Ruby version requirement:
+* ruby 1\.9\.3
+
+Your current platform satisfies the Ruby version requirement\.
+.
+.fi
+.
+.IP "" 0
+.
+.P
+\fBplatform\fR will list all the platforms in your \fBGemfile\.lock\fR as well as the \fBruby\fR directive if applicable from your Gemfile(5)\. It will also let you know if the \fBruby\fR directive requirement has been met\. If \fBruby\fR directive doesn\'t match the running Ruby VM, it will tell you what part does not\.
+.
+.SH "OPTIONS"
+.
+.TP
+\fB\-\-ruby\fR
+It will display the ruby directive information, so you don\'t have to parse it from the Gemfile(5)\.
+

data/bundler/man/bundle-platform.1.txt

@@ -0,0 +1,57 @@
+BUNDLE-PLATFORM(1)					    BUNDLE-PLATFORM(1)
+
+
+
+NAME
+       bundle-platform - Displays platform compatibility information
+
+SYNOPSIS
+       bundle platform [--ruby]
+
+DESCRIPTION
+       platform  will display information from your Gemfile, Gemfile.lock, and
+       Ruby VM about your platform.
+
+       For instance, using this Gemfile(5):
+
+
+
+	   source "https://rubygems.org"
+
+	   ruby "1.9.3"
+
+	   gem "rack"
+
+
+
+       If you run bundle platform on Ruby 1.9.3, it will display the following
+       output:
+
+
+
+	   Your platform is: x86_64-linux
+
+	   Your app has gems that work on these platforms:
+	   * ruby
+
+	   Your Gemfile specifies a Ruby version requirement:
+	   * ruby 1.9.3
+
+	   Your current platform satisfies the Ruby version requirement.
+
+
+
+       platform  will  list  all the platforms in your Gemfile.lock as well as
+       the ruby directive if applicable from your Gemfile(5). It will also let
+       you know if the ruby directive requirement has been met. If ruby direc-
+       tive doesn't match the running Ruby VM, it will tell you what part does
+       not.
+
+OPTIONS
+       --ruby It  will	display  the  ruby directive information, so you don't
+	      have to parse it from the Gemfile(5).
+
+
+
+
+				September 2019		    BUNDLE-PLATFORM(1)

data/bundler/man/bundle-pristine.1

@@ -0,0 +1,34 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-PRISTINE" "1" "September 2019" "" ""
+.
+.SH "NAME"
+\fBbundle\-pristine\fR \- Restores installed gems to their pristine condition
+.
+.SH "SYNOPSIS"
+\fBbundle pristine\fR
+.
+.SH "DESCRIPTION"
+\fBpristine\fR restores the installed gems in the bundle to their pristine condition using the local gem cache from RubyGems\. For git gems, a forced checkout will be performed\.
+.
+.P
+For further explanation, \fBbundle pristine\fR ignores unpacked files on disk\. In other words, this command utilizes the local \fB\.gem\fR cache or the gem\'s git repository as if one were installing from scratch\.
+.
+.P
+Note: the Bundler gem cannot be restored to its original state with \fBpristine\fR\. One also cannot use \fBbundle pristine\fR on gems with a \'path\' option in the Gemfile, because bundler has no original copy it can restore from\.
+.
+.P
+When is it practical to use \fBbundle pristine\fR?
+.
+.P
+It comes in handy when a developer is debugging a gem\. \fBbundle pristine\fR is a great way to get rid of experimental changes to a gem that one may not want\.
+.
+.P
+Why use \fBbundle pristine\fR over \fBgem pristine \-\-all\fR?
+.
+.P
+Both commands are very similar\. For context: \fBbundle pristine\fR, without arguments, cleans all gems from the lockfile\. Meanwhile, \fBgem pristine \-\-all\fR cleans all installed gems for that Ruby version\.
+.
+.P
+If a developer forgets which gems in their project they might have been debugging, the Rubygems \fBgem pristine [GEMNAME]\fR command may be inconvenient\. One can avoid waiting for \fBgem pristine \-\-all\fR, and instead run \fBbundle pristine\fR\.

data/bundler/man/bundle-pristine.1.txt

@@ -0,0 +1,44 @@
+BUNDLE-PRISTINE(1)					    BUNDLE-PRISTINE(1)
+
+
+
+NAME
+       bundle-pristine - Restores installed gems to their pristine condition
+
+SYNOPSIS
+       bundle pristine
+
+DESCRIPTION
+       pristine  restores  the	installed gems in the bundle to their pristine
+       condition using the local gem cache from  RubyGems.  For  git  gems,  a
+       forced checkout will be performed.
+
+       For  further  explanation,  bundle  pristine  ignores unpacked files on
+       disk. In other words, this command utilizes the local .gem cache or the
+       gem's git repository as if one were installing from scratch.
+
+       Note:  the  Bundler  gem  cannot be restored to its original state with
+       pristine. One also cannot use bundle pristine on  gems  with  a	'path'
+       option  in  the	Gemfile,  because  bundler has no original copy it can
+       restore from.
+
+       When is it practical to use bundle pristine?
+
+       It comes in handy when a developer is debugging a gem. bundle  pristine
+       is a great way to get rid of experimental changes to a gem that one may
+       not want.
+
+       Why use bundle pristine over gem pristine --all?
+
+       Both commands are very similar. For context: bundle  pristine,  without
+       arguments,  cleans  all gems from the lockfile. Meanwhile, gem pristine
+       --all cleans all installed gems for that Ruby version.
+
+       If a developer forgets which gems in their project they might have been
+       debugging,  the Rubygems gem pristine [GEMNAME] command may be inconve-
+       nient. One can avoid waiting for gem pristine --all,  and  instead  run
+       bundle pristine.
+
+
+
+				September 2019		    BUNDLE-PRISTINE(1)