rsmp_schema 0.4.4 → 0.4.5

data/schemas/tlc/1.1/statuses/S0021.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Manually set detector logic.\nProvides status of detector logic (1-255) regarding if they are either forced to true or false.\nCan be used to connect RSMP compatible detection equipment to the traffic light controller. Can also be used for prioritization.",
   "allOf" : [
     {
-      "description" : "Manually set detector logic.\nProvides status of detector logic (1-255) regarding if they are either forced to true or false.\nCan be used to connect RSMP compatible detection equipment to the traffic light controller. Can also be used for prioritization.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -22,28 +22,34 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "detectorlogics"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Manually set detector logics (1/0) as text field",
-            "type" : "string",
-            "pattern" : "^[01]*$"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "detectorlogics"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Manually set detector logics (1/0) as text field",
+                  "type" : "string",
+                  "pattern" : "^[01]*$"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

data/schemas/tlc/1.1/statuses/S0022.json

@@ -1,7 +1,7 @@
 {
+  "description" : "List of time plans.\nProvides a list of the configured time plans which is possible to use. This status was added due to status S0018 only provides the total number of time plans and not which were possible to use with M0002.\nCan be used for the management system to check the number of time plans configured in the controller.",
   "allOf" : [
     {
-      "description" : "List of time plans.\nProvides a list of the configured time plans which is possible to use. This status was added due to status S0018 only provides the total number of time plans and not which were possible to use with M0002.\nCan be used for the management system to check the number of time plans configured in the controller.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -22,27 +22,33 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "status"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Comma separated list of configured time plans. E.g. \"1,2,3,5\"",
-            "type" : "string"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "status"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Comma separated list of configured time plans. E.g. \"1,2,3,5\"",
+                  "type" : "string"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

data/schemas/tlc/1.1/statuses/S0023.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Dynamic bands.\nProvides a list of all defined dynamic bands. Dynamic bands moves start of signal groups in the cycle and changes the signal timings.\nA typical usage of dynamic bands is scenario based control where changing of signal timings is used for optimal traffic flow.",
   "allOf" : [
     {
-      "description" : "Dynamic bands.\nProvides a list of all defined dynamic bands. Dynamic bands moves start of signal groups in the cycle and changes the signal timings.\nA typical usage of dynamic bands is scenario based control where changing of signal timings is used for optimal traffic flow.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -22,28 +22,34 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "status"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Dynamic bands.\nEach dynamic band are written as pp-dd-ee where:\npp=Time plan\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\npp-dd-ee,pp-dd-ee",
-            "type" : "string",
-            "pattern" : "(^$)|(^(?<item>(\\d{1,2})\\-\\d{1,2}-\\d{1,2})(,\\g<item>)*$)"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "status"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Dynamic bands.\nEach dynamic band are written as pp-dd-ee where:\npp=Time plan\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\npp-dd-ee,pp-dd-ee",
+                  "type" : "string",
+                  "pattern" : "(^$)|(^(?<item>(\\d{1,2})\\-\\d{1,2}-\\d{1,2})(,\\g<item>)*$)"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

data/schemas/tlc/1.1/statuses/S0024.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Offset time.\nOffset time is used to define an offset between intersections in coordinated control. It is based on the expected travel time between intersections.\nCan be used by the management system to check to fine tune the coordination for optimal traffic flow.",
   "allOf" : [
     {
-      "description" : "Offset time.\nOffset time is used to define an offset between intersections in coordinated control. It is based on the expected travel time between intersections.\nCan be used by the management system to check to fine tune the coordination for optimal traffic flow.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -22,28 +22,34 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "status"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Offset table\nEach offset time is written as p-t where:\np=time plan number (from 1 to 255)\nt=offset time in seconds (from 0 to 255)\n\nEach offset time is separated with a comma\n\nE.g.\n1-0,2-13-3-7",
-            "type" : "string",
-            "pattern" : "^(\\d{1,3}\\-\\d{1,3})(?:,(\\d{1,3}\\-\\d{1,3}))*$"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "status"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Offset table\nEach offset time is written as p-t where:\np=time plan number (from 1 to 255)\nt=offset time in seconds (from 0 to 255)\n\nEach offset time is separated with a comma\n\nE.g.\n1-0,2-13-3-7",
+                  "type" : "string",
+                  "pattern" : "^(\\d{1,3}\\-\\d{1,3})(?:,(\\d{1,3}\\-\\d{1,3}))*$"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]