rsmp_schema 0.4.3 → 0.4.5

data/schemas/tlc/1.1/statuses/S0208.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Traffic Counting: Number of vehicles of given classification.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
   "allOf" : [
     {
-      "description" : "Traffic Counting: Number of vehicles of given classification.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -22,261 +22,282 @@
     {
       "if" : {
         "required" : [
-          "n"
+          "q"
         ],
         "properties" : {
-          "n" : {
-            "const" : "start"
+          "q" : {
+            "const" : "undefined"
           }
         }
       },
       "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
-              }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "P"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of cars.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "start"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "PS"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of cars with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+                    }
+                  ]
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "L"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of trucks.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "P"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "LS"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of trucks with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of cars.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "B"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of buses.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "PS"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "SP"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of trams.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of cars with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "MC"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of motor cycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "L"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "C"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of bicycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of trucks.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "F"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Number of pedestrians.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "LS"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of trucks with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "B"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of buses.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "SP"
+                }
               }
-            ]
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of trams.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "MC"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of motor cycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "C"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of bicycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "F"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Number of pedestrians.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
+                    }
+                  ]
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: rsmp_schema
 version: !ruby/object:Gem::Version
-  version: 0.4.3
+  version: 0.4.5
 platform: ruby
 authors:
 - Emil Tin
 autorequire:
 bindir: exe
 cert_chain: []
-date: 2023-07-07 00:00:00.000000000 Z
+date: 2023-07-13 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: json_schemer