rsmp 0.42.9 → 0.43.0

data/schemas/tlc/1.0.14/statuses/S0018.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Number of time plans\nCan be used for the management system to check the number of time plans configured in the controller.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "number"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "number"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Number of time plans (depreciated)",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0019.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Number of traffic situations.\nCan be used for the management system to check the number of traffic situations configured in the controller.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "number"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "number"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Number of traffic situations",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0020.json

@@ -0,0 +1,54 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Control mode.\nCan be used for the management system to check the current control mode (startup, normal, standby, failure, test).",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "controlmode",
+        "intersection"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "intersection"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)\nOther value: Intersection number",
+              "$ref" : "../defs/definitions.json#/integer_list"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "controlmode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "$ref" : "../defs/definitions.json#/string_list",
+              "pattern" : "(?-mix:^(startup|control|standby|failure|test)(?:,(startup|control|standby|failure|test))*$)"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0021.json

@@ -0,0 +1,37 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Manually set detector logic.\nProvides status of detector logic (1-255) regarding if they are either forced to true or false.\nCan be used to connect RSMP compatible detection equipment to the traffic light controller. Can also be used for prioritization.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "detectorlogics"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "detectorlogics"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Manually set detector logics (1/0) as text field",
+              "type" : "string",
+              "pattern" : "^[01]*$"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0022.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "List of time plans.\nProvides a list of the configured time plans which is possible to use. This status was added due to status S0018 only provides the total number of time plans and not which were possible to use with M0002.\nCan be used for the management system to check the number of time plans configured in the controller.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Comma separated list of configured time plans. E.g. \"1,2,3,5\"",
+              "type" : "string"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0023.json

@@ -0,0 +1,37 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Dynamic bands.\nProvides a list of all defined dynamic bands. Dynamic bands moves start of signal groups in the cycle and changes the signal timings.\nA typical usage of dynamic bands is scenario based control where changing of signal timings is used for optimal traffic flow.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Dynamic bands.\nEach dynamic band are written as pp-dd-ee where:\npp=Time plan\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\npp-dd-ee,pp-dd-ee",
+              "type" : "string",
+              "pattern" : "(^$)|(^(?<item>(\\d{1,2})\\-\\d{1,2}-\\d{1,2})(,\\g<item>)*$)"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0024.json

@@ -0,0 +1,37 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Offset time.\nOffset time is used to define an offset between intersections in coordinated control. It is based on the expected travel time between intersections.\nCan be used by the management system to check to fine tune the coordination for optimal traffic flow.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Offset table\nEach offset time is written as pp-tt where:\npp=time plan\ntt=offset time in seconds\n\nEach offset time is separated with a comma\n\nE.g.\npp-tt,pp-tt",
+              "type" : "string",
+              "pattern" : "^(\\d{1,2}\\-\\d{1,2})(?:,(\\d{1,2}\\-\\d{1,2}))*$"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0025.json

@@ -0,0 +1,162 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Time-of-Green / Time-of-Red.\nProvides predicted signal timings of green and red for each signal group. Max, min and likely time to green and red.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "ToGConfidence",
+        "ToRConfidence",
+        "likelyToGEstimate",
+        "likelyToREstimate",
+        "maxToGEstimate",
+        "maxToREstimate",
+        "minToGEstimate",
+        "minToREstimate"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "minToGEstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the minimum time for the signal group to go to green. If the signal group is green, it is the minimum time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "maxToGEstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the maximum time for the signal group to go to green. If the signal group is green, it is the maximum time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "likelyToGEstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the most likely time for the signal group to go to green. If the signal group is green, it is the most likely time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "ToGConfidence"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Confidence of the likelyToGEstimate. 0-100%",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "minToREstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the minimum time for the signal group to go to red. If the signal group is red, it is the minimum time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "maxToREstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the maximum time for the signal group to go to red. If the signal group is red, it is the maximum time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "likelyToREstimate"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time stamp for the most likely time for the signal group to go to red. If the signal group is red, it is the most likely time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z",
+              "$ref" : "../defs/definitions.json#/timestamp"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "ToRConfidence"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Confidence of the likelyToREstimate. 0-100%",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0026.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Week time table.\nWeek time table for signal programs (time plan) to use for each day during a week.\nThe week time table determine which predefined signal timings (time plan) to use during the week for optimal traffic flow.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Week time table. Defines time table to use for each week day\nEach day is written as d-t where:\nd=day of week\nt=time table nr\n\nDay of week legend:\n0=Monday\n1=Tuesday\n2=Wednesday\n3=Thursday\n4=Friday\n5=Saturday\n6=Sunday\n\nEach segment is separated with a comma\nE.g.\nd-t,d-t",
+              "type" : "string"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0027.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Time tables.\nTime of day for when to switch signal program (time plan).\nThe signal timings (time plan) to use during time of day for optimal traffic flow.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Time Table. Defines time tables.\nEach time definition is written as t-o-h-m where:\nt=time table nr (1-12)\no=function\nh=hour - switching time\nm=minute - switching minute\n\nFunction legend:\n0=no plan is selected by time table\n1=set plan 1\n...\n16= set plan 16\n\nhour and minute is using local time (not UTC)\n\nEach time definition is separated with a comma\n\nE.g.\nt-o-h-m,t-o-h-m",
+              "type" : "string"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0028.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Cycle time.\nCycle time (or cycle length) is the sum of all phases in a time plan (traffic program). This time is fixed when using fixed time control or coordination (except \"local coordination\"). When the cycle counter reaches this length it is reset back to zero.\nChanging the cycle time can be used as part of scenario based control.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Cycle time table\nEach cycle time is written as pp-tt where:\npp=time plan\ntt=cycle time in seconds\n\nEach cycle time is separated with a comma\n\nE.g.\npp-tt,pp-tt",
+              "type" : "string"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0029.json

@@ -0,0 +1,36 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Forced input status.\nProvide status of input (1-255) regarding if they are forced or not. Can be used for all types of input where the traffic light controller must react to external control.\nCan be used for bus priority, coordination between traffic controllers, external control systems, and much more.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "Forced input status as text field",
+              "type" : "string"
+            }
+          }
+        }
+      }
+    ]
+  }
+}

data/schemas/tlc/1.0.14/statuses/S0091.json

@@ -0,0 +1,57 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Operator logged in/out OP-panel.\nProvides information if maintenance personnel is currently working on site.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "status",
+        "user"
+      ]
+    }
+  },
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/q_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "user"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "description" : "nobody: No one logged in\n<username>: User currently logged in",
+              "type" : "string"
+            }
+          }
+        }
+      },
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "s" : {
+              "type" : "string",
+              "enum" : [
+                "login",
+                "logout"
+              ]
+            }
+          }
+        }
+      }
+    ]
+  }
+}