rroonga 6.0.7-x86-mingw32 → 6.0.9-x86-mingw32

data/vendor/local/share/man/man3/pcreunicode.3

@@ -0,0 +1,249 @@
+.TH PCREUNICODE 3 "27 February 2013" "PCRE 8.33"
+.SH NAME
+PCRE - Perl-compatible regular expressions
+.SH "UTF-8, UTF-16, UTF-32, AND UNICODE PROPERTY SUPPORT"
+.rs
+.sp
+As well as UTF-8 support, PCRE also supports UTF-16 (from release 8.30) and
+UTF-32 (from release 8.32), by means of two additional libraries. They can be
+built as well as, or instead of, the 8-bit library.
+.
+.
+.SH "UTF-8 SUPPORT"
+.rs
+.sp
+In order process UTF-8 strings, you must build PCRE's 8-bit library with UTF
+support, and, in addition, you must call
+.\" HREF
+\fBpcre_compile()\fP
+.\"
+with the PCRE_UTF8 option flag, or the pattern must start with the sequence
+(*UTF8) or (*UTF). When either of these is the case, both the pattern and any
+subject strings that are matched against it are treated as UTF-8 strings
+instead of strings of individual 1-byte characters.
+.
+.
+.SH "UTF-16 AND UTF-32 SUPPORT"
+.rs
+.sp
+In order process UTF-16 or UTF-32 strings, you must build PCRE's 16-bit or
+32-bit library with UTF support, and, in addition, you must call
+.\" HREF
+\fBpcre16_compile()\fP
+.\"
+or
+.\" HREF
+\fBpcre32_compile()\fP
+.\"
+with the PCRE_UTF16 or PCRE_UTF32 option flag, as appropriate. Alternatively,
+the pattern must start with the sequence (*UTF16), (*UTF32), as appropriate, or
+(*UTF), which can be used with either library. When UTF mode is set, both the
+pattern and any subject strings that are matched against it are treated as
+UTF-16 or UTF-32 strings instead of strings of individual 16-bit or 32-bit
+characters.
+.
+.
+.SH "UTF SUPPORT OVERHEAD"
+.rs
+.sp
+If you compile PCRE with UTF support, but do not use it at run time, the
+library will be a bit bigger, but the additional run time overhead is limited
+to testing the PCRE_UTF[8|16|32] flag occasionally, so should not be very big.
+.
+.
+.SH "UNICODE PROPERTY SUPPORT"
+.rs
+.sp
+If PCRE is built with Unicode character property support (which implies UTF
+support), the escape sequences \ep{..}, \eP{..}, and \eX can be used.
+The available properties that can be tested are limited to the general
+category properties such as Lu for an upper case letter or Nd for a decimal
+number, the Unicode script names such as Arabic or Han, and the derived
+properties Any and L&. Full lists is given in the
+.\" HREF
+\fBpcrepattern\fP
+.\"
+and
+.\" HREF
+\fBpcresyntax\fP
+.\"
+documentation. Only the short names for properties are supported. For example,
+\ep{L} matches a letter. Its Perl synonym, \ep{Letter}, is not supported.
+Furthermore, in Perl, many properties may optionally be prefixed by "Is", for
+compatibility with Perl 5.6. PCRE does not support this.
+.
+.
+.\" HTML <a name="utf8strings"></a>
+.SS "Validity of UTF-8 strings"
+.rs
+.sp
+When you set the PCRE_UTF8 flag, the byte strings passed as patterns and
+subjects are (by default) checked for validity on entry to the relevant
+functions. The entire string is checked before any other processing takes
+place. From release 7.3 of PCRE, the check is according the rules of RFC 3629,
+which are themselves derived from the Unicode specification. Earlier releases
+of PCRE followed the rules of RFC 2279, which allows the full range of 31-bit
+values (0 to 0x7FFFFFFF). The current check allows only values in the range U+0
+to U+10FFFF, excluding the surrogate area. (From release 8.33 the so-called
+"non-character" code points are no longer excluded because Unicode corrigendum
+#9 makes it clear that they should not be.)
+.P
+Characters in the "Surrogate Area" of Unicode are reserved for use by UTF-16,
+where they are used in pairs to encode codepoints with values greater than
+0xFFFF. The code points that are encoded by UTF-16 pairs are available
+independently in the UTF-8 and UTF-32 encodings. (In other words, the whole
+surrogate thing is a fudge for UTF-16 which unfortunately messes up UTF-8 and
+UTF-32.)
+.P
+If an invalid UTF-8 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first byte
+of the failing character. The run-time functions \fBpcre_exec()\fP and
+\fBpcre_dfa_exec()\fP also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+.P
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance, for
+example in the case of a long subject string that is being scanned repeatedly.
+If you set the PCRE_NO_UTF8_CHECK flag at compile time or at run time, PCRE
+assumes that the pattern or subject it is given (respectively) contains only
+valid UTF-8 codes. In this case, it does not diagnose an invalid UTF-8 string.
+.P
+Note that passing PCRE_NO_UTF8_CHECK to \fBpcre_compile()\fP just disables the
+check for the pattern; it does not also apply to subject strings. If you want
+to disable the check for a subject string you must pass this option to
+\fBpcre_exec()\fP or \fBpcre_dfa_exec()\fP.
+.P
+If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set, the result
+is undefined and your program may crash.
+.
+.
+.\" HTML <a name="utf16strings"></a>
+.SS "Validity of UTF-16 strings"
+.rs
+.sp
+When you set the PCRE_UTF16 flag, the strings of 16-bit data units that are
+passed as patterns and subjects are (by default) checked for validity on entry
+to the relevant functions. Values other than those in the surrogate range
+U+D800 to U+DFFF are independent code points. Values in the surrogate range
+must be used in pairs in the correct manner.
+.P
+If an invalid UTF-16 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first data
+unit of the failing character. The run-time functions \fBpcre16_exec()\fP and
+\fBpcre16_dfa_exec()\fP also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+.P
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance. If you set
+the PCRE_NO_UTF16_CHECK flag at compile time or at run time, PCRE assumes that
+the pattern or subject it is given (respectively) contains only valid UTF-16
+sequences. In this case, it does not diagnose an invalid UTF-16 string.
+However, if an invalid string is passed, the result is undefined.
+.
+.
+.\" HTML <a name="utf32strings"></a>
+.SS "Validity of UTF-32 strings"
+.rs
+.sp
+When you set the PCRE_UTF32 flag, the strings of 32-bit data units that are
+passed as patterns and subjects are (by default) checked for validity on entry
+to the relevant functions.  This check allows only values in the range U+0
+to U+10FFFF, excluding the surrogate area U+D800 to U+DFFF.
+.P
+If an invalid UTF-32 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first data
+unit of the failing character. The run-time functions \fBpcre32_exec()\fP and
+\fBpcre32_dfa_exec()\fP also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+.P
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance. If you set
+the PCRE_NO_UTF32_CHECK flag at compile time or at run time, PCRE assumes that
+the pattern or subject it is given (respectively) contains only valid UTF-32
+sequences. In this case, it does not diagnose an invalid UTF-32 string.
+However, if an invalid string is passed, the result is undefined.
+.
+.
+.SS "General comments about UTF modes"
+.rs
+.sp
+1. Codepoints less than 256 can be specified in patterns by either braced or
+unbraced hexadecimal escape sequences (for example, \ex{b3} or \exb3). Larger
+values have to use braced sequences.
+.P
+2. Octal numbers up to \e777 are recognized, and in UTF-8 mode they match
+two-byte characters for values greater than \e177.
+.P
+3. Repeat quantifiers apply to complete UTF characters, not to individual
+data units, for example: \ex{100}{3}.
+.P
+4. The dot metacharacter matches one UTF character instead of a single data
+unit.
+.P
+5. The escape sequence \eC can be used to match a single byte in UTF-8 mode, or
+a single 16-bit data unit in UTF-16 mode, or a single 32-bit data unit in
+UTF-32 mode, but its use can lead to some strange effects because it breaks up
+multi-unit characters (see the description of \eC in the
+.\" HREF
+\fBpcrepattern\fP
+.\"
+documentation). The use of \eC is not supported in the alternative matching
+function \fBpcre[16|32]_dfa_exec()\fP, nor is it supported in UTF mode by the
+JIT optimization of \fBpcre[16|32]_exec()\fP. If JIT optimization is requested
+for a UTF pattern that contains \eC, it will not succeed, and so the matching
+will be carried out by the normal interpretive function.
+.P
+6. The character escapes \eb, \eB, \ed, \eD, \es, \eS, \ew, and \eW correctly
+test characters of any code value, but, by default, the characters that PCRE
+recognizes as digits, spaces, or word characters remain the same set as in
+non-UTF mode, all with values less than 256. This remains true even when PCRE
+is built to include Unicode property support, because to do otherwise would
+slow down PCRE in many common cases. Note in particular that this applies to
+\eb and \eB, because they are defined in terms of \ew and \eW. If you really
+want to test for a wider sense of, say, "digit", you can use explicit Unicode
+property tests such as \ep{Nd}. Alternatively, if you set the PCRE_UCP option,
+the way that the character escapes work is changed so that Unicode properties
+are used to determine which characters match. There are more details in the
+section on
+.\" HTML <a href="pcrepattern.html#genericchartypes">
+.\" </a>
+generic character types
+.\"
+in the
+.\" HREF
+\fBpcrepattern\fP
+.\"
+documentation.
+.P
+7. Similarly, characters that match the POSIX named character classes are all
+low-valued characters, unless the PCRE_UCP option is set.
+.P
+8. However, the horizontal and vertical white space matching escapes (\eh, \eH,
+\ev, and \eV) do match all the appropriate Unicode characters, whether or not
+PCRE_UCP is set.
+.P
+9. Case-insensitive matching applies only to characters whose values are less
+than 128, unless PCRE is built with Unicode property support. A few Unicode
+characters such as Greek sigma have more than two codepoints that are
+case-equivalent. Up to and including PCRE release 8.31, only one-to-one case
+mappings were supported, but later releases (with Unicode property support) do
+treat as case-equivalent all versions of characters such as Greek sigma.
+.
+.
+.SH AUTHOR
+.rs
+.sp
+.nf
+Philip Hazel
+University Computing Service
+Cambridge CB2 3QH, England.
+.fi
+.
+.
+.SH REVISION
+.rs
+.sp
+.nf
+Last updated: 27 February 2013
+Copyright (c) 1997-2013 University of Cambridge.
+.fi

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: rroonga
 version: !ruby/object:Gem::Version
-  version: 6.0.7
+  version: 6.0.9
 platform: x86-mingw32
 authors:
 - Kouhei Sutou
@@ -12,7 +12,7 @@ authors:
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2016-08-13 00:00:00.000000000 Z
+date: 2016-10-07 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: pkg-config
@@ -194,10 +194,10 @@ email:
 - y.hayamizu@gmail.com
 - dara@shidara.net
 executables:
-- grntest-log-analyze
+- groonga-index-dump
 - groonga-database-inspect
 - grndump
-- groonga-index-dump
+- grntest-log-analyze
 extensions: []
 extra_rdoc_files:
 - README.md
@@ -401,6 +401,9 @@ files:
 - vendor/local/bin/libmecab-2.dll
 - vendor/local/bin/libmsgpackc.dll
 - vendor/local/bin/libonig-5.dll
+- vendor/local/bin/libpcre-1.dll
+- vendor/local/bin/libpcrecpp-0.dll
+- vendor/local/bin/libpcreposix-0.dll
 - vendor/local/bin/libstdc++-6.dll
 - vendor/local/bin/lz4.exe
 - vendor/local/bin/lz4c.exe
@@ -409,6 +412,9 @@ files:
 - vendor/local/bin/mecab.exe
 - vendor/local/bin/mecabrc
 - vendor/local/bin/onig-config
+- vendor/local/bin/pcre-config
+- vendor/local/bin/pcregrep.exe
+- vendor/local/bin/pcretest.exe
 - vendor/local/bin/zlib1.dll
 - vendor/local/etc/groonga/groonga.conf
 - vendor/local/etc/groonga/httpd/fastcgi.conf
@@ -1110,6 +1116,12 @@ files:
 - vendor/local/include/oniggnu.h
 - vendor/local/include/onigposix.h
 - vendor/local/include/oniguruma.h
+- vendor/local/include/pcre.h
+- vendor/local/include/pcre_scanner.h
+- vendor/local/include/pcre_stringpiece.h
+- vendor/local/include/pcrecpp.h
+- vendor/local/include/pcrecpparg.h
+- vendor/local/include/pcreposix.h
 - vendor/local/include/zconf.h
 - vendor/local/include/zlib.h
 - vendor/local/lib/groonga/plugins/expression_rewriters/optimizer.rb
@@ -1225,10 +1237,22 @@ files:
 - vendor/local/lib/libonig.a
 - vendor/local/lib/libonig.dll.a
 - vendor/local/lib/libonig.la
+- vendor/local/lib/libpcre.a
+- vendor/local/lib/libpcre.dll.a
+- vendor/local/lib/libpcre.la
+- vendor/local/lib/libpcrecpp.a
+- vendor/local/lib/libpcrecpp.dll.a
+- vendor/local/lib/libpcrecpp.la
+- vendor/local/lib/libpcreposix.a
+- vendor/local/lib/libpcreposix.dll.a
+- vendor/local/lib/libpcreposix.la
 - vendor/local/lib/libz.a
 - vendor/local/lib/libz.dll.a
 - vendor/local/lib/pkgconfig/groonga.pc
 - vendor/local/lib/pkgconfig/liblz4.pc
+- vendor/local/lib/pkgconfig/libpcre.pc
+- vendor/local/lib/pkgconfig/libpcrecpp.pc
+- vendor/local/lib/pkgconfig/libpcreposix.pc
 - vendor/local/lib/pkgconfig/msgpack.pc
 - vendor/local/lib/pkgconfig/oniguruma.pc
 - vendor/local/lib/pkgconfig/zlib.pc
@@ -1379,6 +1403,7 @@ files:
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/shutdown.txt
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/status.txt
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/suggest.txt
+- vendor/local/share/doc/groonga/en/html/_sources/reference/commands/table_copy.txt
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/table_create.txt
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/table_list.txt
 - vendor/local/share/doc/groonga/en/html/_sources/reference/commands/table_remove.txt
@@ -1644,6 +1669,7 @@ files:
 - vendor/local/share/doc/groonga/en/html/reference/commands/shutdown.html
 - vendor/local/share/doc/groonga/en/html/reference/commands/status.html
 - vendor/local/share/doc/groonga/en/html/reference/commands/suggest.html
+- vendor/local/share/doc/groonga/en/html/reference/commands/table_copy.html
 - vendor/local/share/doc/groonga/en/html/reference/commands/table_create.html
 - vendor/local/share/doc/groonga/en/html/reference/commands/table_list.html
 - vendor/local/share/doc/groonga/en/html/reference/commands/table_remove.html
@@ -1888,6 +1914,7 @@ files:
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/shutdown.txt
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/status.txt
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/suggest.txt
+- vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/table_copy.txt
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/table_create.txt
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/table_list.txt
 - vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/table_remove.txt
@@ -2153,6 +2180,7 @@ files:
 - vendor/local/share/doc/groonga/ja/html/reference/commands/shutdown.html
 - vendor/local/share/doc/groonga/ja/html/reference/commands/status.html
 - vendor/local/share/doc/groonga/ja/html/reference/commands/suggest.html
+- vendor/local/share/doc/groonga/ja/html/reference/commands/table_copy.html
 - vendor/local/share/doc/groonga/ja/html/reference/commands/table_create.html
 - vendor/local/share/doc/groonga/ja/html/reference/commands/table_list.html
 - vendor/local/share/doc/groonga/ja/html/reference/commands/table_remove.html
@@ -2257,6 +2285,70 @@ files:
 - vendor/local/share/doc/groonga/ja/html/tutorial/patricia_trie.html
 - vendor/local/share/doc/groonga/ja/html/tutorial/query_expansion.html
 - vendor/local/share/doc/groonga/ja/html/tutorial/search.html
+- vendor/local/share/doc/pcre/AUTHORS
+- vendor/local/share/doc/pcre/COPYING
+- vendor/local/share/doc/pcre/ChangeLog
+- vendor/local/share/doc/pcre/LICENCE
+- vendor/local/share/doc/pcre/NEWS
+- vendor/local/share/doc/pcre/README
+- vendor/local/share/doc/pcre/html/NON-AUTOTOOLS-BUILD.txt
+- vendor/local/share/doc/pcre/html/README.txt
+- vendor/local/share/doc/pcre/html/index.html
+- vendor/local/share/doc/pcre/html/pcre-config.html
+- vendor/local/share/doc/pcre/html/pcre.html
+- vendor/local/share/doc/pcre/html/pcre16.html
+- vendor/local/share/doc/pcre/html/pcre32.html
+- vendor/local/share/doc/pcre/html/pcre_assign_jit_stack.html
+- vendor/local/share/doc/pcre/html/pcre_compile.html
+- vendor/local/share/doc/pcre/html/pcre_compile2.html
+- vendor/local/share/doc/pcre/html/pcre_config.html
+- vendor/local/share/doc/pcre/html/pcre_copy_named_substring.html
+- vendor/local/share/doc/pcre/html/pcre_copy_substring.html
+- vendor/local/share/doc/pcre/html/pcre_dfa_exec.html
+- vendor/local/share/doc/pcre/html/pcre_exec.html
+- vendor/local/share/doc/pcre/html/pcre_free_study.html
+- vendor/local/share/doc/pcre/html/pcre_free_substring.html
+- vendor/local/share/doc/pcre/html/pcre_free_substring_list.html
+- vendor/local/share/doc/pcre/html/pcre_fullinfo.html
+- vendor/local/share/doc/pcre/html/pcre_get_named_substring.html
+- vendor/local/share/doc/pcre/html/pcre_get_stringnumber.html
+- vendor/local/share/doc/pcre/html/pcre_get_stringtable_entries.html
+- vendor/local/share/doc/pcre/html/pcre_get_substring.html
+- vendor/local/share/doc/pcre/html/pcre_get_substring_list.html
+- vendor/local/share/doc/pcre/html/pcre_jit_exec.html
+- vendor/local/share/doc/pcre/html/pcre_jit_stack_alloc.html
+- vendor/local/share/doc/pcre/html/pcre_jit_stack_free.html
+- vendor/local/share/doc/pcre/html/pcre_maketables.html
+- vendor/local/share/doc/pcre/html/pcre_pattern_to_host_byte_order.html
+- vendor/local/share/doc/pcre/html/pcre_refcount.html
+- vendor/local/share/doc/pcre/html/pcre_study.html
+- vendor/local/share/doc/pcre/html/pcre_utf16_to_host_byte_order.html
+- vendor/local/share/doc/pcre/html/pcre_utf32_to_host_byte_order.html
+- vendor/local/share/doc/pcre/html/pcre_version.html
+- vendor/local/share/doc/pcre/html/pcreapi.html
+- vendor/local/share/doc/pcre/html/pcrebuild.html
+- vendor/local/share/doc/pcre/html/pcrecallout.html
+- vendor/local/share/doc/pcre/html/pcrecompat.html
+- vendor/local/share/doc/pcre/html/pcrecpp.html
+- vendor/local/share/doc/pcre/html/pcredemo.html
+- vendor/local/share/doc/pcre/html/pcregrep.html
+- vendor/local/share/doc/pcre/html/pcrejit.html
+- vendor/local/share/doc/pcre/html/pcrelimits.html
+- vendor/local/share/doc/pcre/html/pcrematching.html
+- vendor/local/share/doc/pcre/html/pcrepartial.html
+- vendor/local/share/doc/pcre/html/pcrepattern.html
+- vendor/local/share/doc/pcre/html/pcreperform.html
+- vendor/local/share/doc/pcre/html/pcreposix.html
+- vendor/local/share/doc/pcre/html/pcreprecompile.html
+- vendor/local/share/doc/pcre/html/pcresample.html
+- vendor/local/share/doc/pcre/html/pcrestack.html
+- vendor/local/share/doc/pcre/html/pcresyntax.html
+- vendor/local/share/doc/pcre/html/pcretest.html
+- vendor/local/share/doc/pcre/html/pcreunicode.html
+- vendor/local/share/doc/pcre/pcre-config.txt
+- vendor/local/share/doc/pcre/pcre.txt
+- vendor/local/share/doc/pcre/pcregrep.txt
+- vendor/local/share/doc/pcre/pcretest.txt
 - vendor/local/share/groonga/examples/dictionary/edict/edict-import.sh
 - vendor/local/share/groonga/examples/dictionary/edict/edict2grn.rb
 - vendor/local/share/groonga/examples/dictionary/eijiro/eijiro-import.sh
@@ -2413,11 +2505,115 @@ files:
 - vendor/local/share/license/onigmo/AUTHORS
 - vendor/local/share/license/onigmo/COPYING
 - vendor/local/share/license/onigmo/README
+- vendor/local/share/license/pcre/LICENCE
 - vendor/local/share/license/zlib/README
 - vendor/local/share/man/man1/lz4.1
 - vendor/local/share/man/man1/lz4c.1
 - vendor/local/share/man/man1/lz4cat.1
 - vendor/local/share/man/man1/mecab.1
+- vendor/local/share/man/man1/pcre-config.1
+- vendor/local/share/man/man1/pcregrep.1
+- vendor/local/share/man/man1/pcretest.1
+- vendor/local/share/man/man3/pcre.3
+- vendor/local/share/man/man3/pcre16.3
+- vendor/local/share/man/man3/pcre16_assign_jit_stack.3
+- vendor/local/share/man/man3/pcre16_compile.3
+- vendor/local/share/man/man3/pcre16_compile2.3
+- vendor/local/share/man/man3/pcre16_config.3
+- vendor/local/share/man/man3/pcre16_copy_named_substring.3
+- vendor/local/share/man/man3/pcre16_copy_substring.3
+- vendor/local/share/man/man3/pcre16_dfa_exec.3
+- vendor/local/share/man/man3/pcre16_exec.3
+- vendor/local/share/man/man3/pcre16_free_study.3
+- vendor/local/share/man/man3/pcre16_free_substring.3
+- vendor/local/share/man/man3/pcre16_free_substring_list.3
+- vendor/local/share/man/man3/pcre16_fullinfo.3
+- vendor/local/share/man/man3/pcre16_get_named_substring.3
+- vendor/local/share/man/man3/pcre16_get_stringnumber.3
+- vendor/local/share/man/man3/pcre16_get_stringtable_entries.3
+- vendor/local/share/man/man3/pcre16_get_substring.3
+- vendor/local/share/man/man3/pcre16_get_substring_list.3
+- vendor/local/share/man/man3/pcre16_jit_exec.3
+- vendor/local/share/man/man3/pcre16_jit_stack_alloc.3
+- vendor/local/share/man/man3/pcre16_jit_stack_free.3
+- vendor/local/share/man/man3/pcre16_maketables.3
+- vendor/local/share/man/man3/pcre16_pattern_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre16_refcount.3
+- vendor/local/share/man/man3/pcre16_study.3
+- vendor/local/share/man/man3/pcre16_utf16_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre16_version.3
+- vendor/local/share/man/man3/pcre32.3
+- vendor/local/share/man/man3/pcre32_assign_jit_stack.3
+- vendor/local/share/man/man3/pcre32_compile.3
+- vendor/local/share/man/man3/pcre32_compile2.3
+- vendor/local/share/man/man3/pcre32_config.3
+- vendor/local/share/man/man3/pcre32_copy_named_substring.3
+- vendor/local/share/man/man3/pcre32_copy_substring.3
+- vendor/local/share/man/man3/pcre32_dfa_exec.3
+- vendor/local/share/man/man3/pcre32_exec.3
+- vendor/local/share/man/man3/pcre32_free_study.3
+- vendor/local/share/man/man3/pcre32_free_substring.3
+- vendor/local/share/man/man3/pcre32_free_substring_list.3
+- vendor/local/share/man/man3/pcre32_fullinfo.3
+- vendor/local/share/man/man3/pcre32_get_named_substring.3
+- vendor/local/share/man/man3/pcre32_get_stringnumber.3
+- vendor/local/share/man/man3/pcre32_get_stringtable_entries.3
+- vendor/local/share/man/man3/pcre32_get_substring.3
+- vendor/local/share/man/man3/pcre32_get_substring_list.3
+- vendor/local/share/man/man3/pcre32_jit_exec.3
+- vendor/local/share/man/man3/pcre32_jit_stack_alloc.3
+- vendor/local/share/man/man3/pcre32_jit_stack_free.3
+- vendor/local/share/man/man3/pcre32_maketables.3
+- vendor/local/share/man/man3/pcre32_pattern_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre32_refcount.3
+- vendor/local/share/man/man3/pcre32_study.3
+- vendor/local/share/man/man3/pcre32_utf32_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre32_version.3
+- vendor/local/share/man/man3/pcre_assign_jit_stack.3
+- vendor/local/share/man/man3/pcre_compile.3
+- vendor/local/share/man/man3/pcre_compile2.3
+- vendor/local/share/man/man3/pcre_config.3
+- vendor/local/share/man/man3/pcre_copy_named_substring.3
+- vendor/local/share/man/man3/pcre_copy_substring.3
+- vendor/local/share/man/man3/pcre_dfa_exec.3
+- vendor/local/share/man/man3/pcre_exec.3
+- vendor/local/share/man/man3/pcre_free_study.3
+- vendor/local/share/man/man3/pcre_free_substring.3
+- vendor/local/share/man/man3/pcre_free_substring_list.3
+- vendor/local/share/man/man3/pcre_fullinfo.3
+- vendor/local/share/man/man3/pcre_get_named_substring.3
+- vendor/local/share/man/man3/pcre_get_stringnumber.3
+- vendor/local/share/man/man3/pcre_get_stringtable_entries.3
+- vendor/local/share/man/man3/pcre_get_substring.3
+- vendor/local/share/man/man3/pcre_get_substring_list.3
+- vendor/local/share/man/man3/pcre_jit_exec.3
+- vendor/local/share/man/man3/pcre_jit_stack_alloc.3
+- vendor/local/share/man/man3/pcre_jit_stack_free.3
+- vendor/local/share/man/man3/pcre_maketables.3
+- vendor/local/share/man/man3/pcre_pattern_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre_refcount.3
+- vendor/local/share/man/man3/pcre_study.3
+- vendor/local/share/man/man3/pcre_utf16_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre_utf32_to_host_byte_order.3
+- vendor/local/share/man/man3/pcre_version.3
+- vendor/local/share/man/man3/pcreapi.3
+- vendor/local/share/man/man3/pcrebuild.3
+- vendor/local/share/man/man3/pcrecallout.3
+- vendor/local/share/man/man3/pcrecompat.3
+- vendor/local/share/man/man3/pcrecpp.3
+- vendor/local/share/man/man3/pcredemo.3
+- vendor/local/share/man/man3/pcrejit.3
+- vendor/local/share/man/man3/pcrelimits.3
+- vendor/local/share/man/man3/pcrematching.3
+- vendor/local/share/man/man3/pcrepartial.3
+- vendor/local/share/man/man3/pcrepattern.3
+- vendor/local/share/man/man3/pcreperform.3
+- vendor/local/share/man/man3/pcreposix.3
+- vendor/local/share/man/man3/pcreprecompile.3
+- vendor/local/share/man/man3/pcresample.3
+- vendor/local/share/man/man3/pcrestack.3
+- vendor/local/share/man/man3/pcresyntax.3
+- vendor/local/share/man/man3/pcreunicode.3
 - vendor/local/share/mecab/dic/naist-jdic/char.bin
 - vendor/local/share/mecab/dic/naist-jdic/char.def
 - vendor/local/share/mecab/dic/naist-jdic/dicrc
@@ -2459,71 +2655,71 @@ specification_version: 4
 summary: Ruby bindings for Groonga that provide full text search and column store
   features.
 test_files:
-- test/test-context.rb
-- test/test-normalizer.rb
-- test/test-double-array-trie.rb
-- test/test-token-regexp.rb
-- test/test-remote.rb
-- test/test-expression.rb
-- test/test-schema-dumper.rb
-- test/test-patricia-trie.rb
-- test/test-table-group.rb
-- test/test-table-select.rb
-- test/test-encoding.rb
-- test/test-windows-event-logger.rb
 - test/test-plugin.rb
-- test/test-table-select-normalize.rb
-- test/test-hash.rb
-- test/test-gqtp.rb
-- test/test-table-dumper.rb
-- test/test-data-column.rb
-- test/test-pagination.rb
-- test/test-column.rb
-- test/test-table-traverse.rb
-- test/test-type.rb
-- test/test-package-label.rb
-- test/groonga-test-utils.rb
-- test/test-thread.rb
-- test/test-procedure.rb
 - test/test-query-logger.rb
-- test/test-index-column.rb
-- test/test-vector-column.rb
-- test/test-fix-size-column.rb
-- test/test-error-message.rb
-- test/test-operator.rb
-- test/test-database-dumper.rb
-- test/run-test.rb
+- test/test-table-select.rb
+- test/test-table-offset-and-limit.rb
+- test/test-token-regexp.rb
+- test/test-sub-records.rb
 - test/test-index-cursor.rb
-- test/test-schema-type.rb
-- test/test-database.rb
-- test/test-id.rb
+- test/test-convert.rb
 - test/test-request-canceler.rb
-- test/test-logger.rb
-- test/test-table.rb
-- test/test-record.rb
 - test/test-version.rb
-- test/test-table-select-mecab.rb
-- test/test-lock-timeout.rb
-- test/test-table-select-weight.rb
-- test/test-geo-point.rb
-- test/test-array.rb
 - test/test-request-timer.rb
-- test/test-sub-records.rb
+- test/test-table.rb
+- test/test-lock-timeout.rb
 - test/test-schema-create-table.rb
+- test/test-index-column.rb
+- test/test-fix-size-column.rb
+- test/test-table-dumper.rb
+- test/test-array.rb
+- test/test-record.rb
+- test/test-schema-dumper.rb
+- test/test-variable-size-column.rb
+- test/test-type.rb
+- test/test-pagination.rb
+- test/test-database-dumper.rb
+- test/test-table-group.rb
+- test/test-accessor.rb
 - test/test-name.rb
-- test/test-schema.rb
-- test/test-command-select.rb
+- test/test-database.rb
+- test/test-database-inspector.rb
+- test/test-operator.rb
+- test/test-procedure.rb
 - test/test-expression-builder.rb
-- test/test-convert.rb
-- test/test-memory-pool.rb
-- test/test-flushable.rb
-- test/test-table-offset-and-limit.rb
-- test/test-exception.rb
-- test/test-variable-size-column.rb
+- test/test-command-select.rb
+- test/test-double-array-trie.rb
 - test/test-config.rb
+- test/test-vector-column.rb
+- test/test-encoding.rb
 - test/test-table-key-support.rb
-- test/test-database-inspector.rb
-- test/test-variable.rb
+- test/test-gqtp.rb
+- test/run-test.rb
+- test/test-patricia-trie.rb
+- test/test-remote.rb
+- test/test-table-select-weight.rb
+- test/test-windows-event-logger.rb
 - test/test-statistic-measurer.rb
+- test/test-logger.rb
+- test/test-package-label.rb
+- test/test-hash.rb
+- test/test-schema-type.rb
+- test/test-error-message.rb
+- test/test-normalizer.rb
+- test/test-flushable.rb
 - test/test-snippet.rb
-- test/test-accessor.rb
+- test/test-thread.rb
+- test/test-variable.rb
+- test/test-memory-pool.rb
+- test/test-id.rb
+- test/test-data-column.rb
+- test/test-exception.rb
+- test/test-table-select-mecab.rb
+- test/test-table-select-normalize.rb
+- test/test-schema.rb
+- test/test-geo-point.rb
+- test/test-table-traverse.rb
+- test/groonga-test-utils.rb
+- test/test-column.rb
+- test/test-context.rb
+- test/test-expression.rb