ring-native 0.0.0 → 0.1.0

data/vendor/ring/crypto/bn/asm/x86_64-mont.pl

@@ -1,1393 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# October 2005.
-#
-# Montgomery multiplication routine for x86_64. While it gives modest
-# 9% improvement of rsa4096 sign on Opteron, rsa512 sign runs more
-# than twice, >2x, as fast. Most common rsa1024 sign is improved by
-# respectful 50%. It remains to be seen if loop unrolling and
-# dedicated squaring routine can provide further improvement...
-
-# July 2011.
-#
-# Add dedicated squaring procedure. Performance improvement varies
-# from platform to platform, but in average it's ~5%/15%/25%/33%
-# for 512-/1024-/2048-/4096-bit RSA *sign* benchmarks respectively.
-
-# August 2011.
-#
-# Unroll and modulo-schedule inner loops in such manner that they
-# are "fallen through" for input lengths of 8, which is critical for
-# 1024-bit RSA *sign*. Average performance improvement in comparison
-# to *initial* version of this module from 2005 is ~0%/30%/40%/45%
-# for 512-/1024-/2048-/4096-bit RSA *sign* benchmarks respectively.
-
-# June 2013.
-#
-# Optimize reduction in squaring procedure and improve 1024+-bit RSA
-# sign performance by 10-16% on Intel Sandy Bridge and later
-# (virtually same on non-Intel processors).
-
-# August 2013.
-#
-# Add MULX/ADOX/ADCX code path.
-
-$flavour = shift;
-$output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open OUT,"| \"$^X\" $xlate $flavour $output";
-*STDOUT=*OUT;
-
-# In upstream, this is controlled by shelling out to the compiler to check
-# versions, but BoringSSL is intended to be used with pre-generated perlasm
-# output, so this isn't useful anyway.
-#
-# TODO(davidben): Enable this option after testing. $addx goes up to 1.
-$addx = 0;
-
-# int bn_mul_mont(
-$rp="%rdi";	# BN_ULONG *rp,
-$ap="%rsi";	# const BN_ULONG *ap,
-$bp="%rdx";	# const BN_ULONG *bp,
-$np="%rcx";	# const BN_ULONG *np,
-$n0="%r8";	# const BN_ULONG *n0,
-$num="%r9";	# int num);
-$lo0="%r10";
-$hi0="%r11";
-$hi1="%r13";
-$i="%r14";
-$j="%r15";
-$m0="%rbx";
-$m1="%rbp";
-
-$code=<<___;
-.text
-
-.extern	OPENSSL_ia32cap_P
-
-.globl	bn_mul_mont
-.type	bn_mul_mont,\@function,6
-.align	16
-bn_mul_mont:
-	test	\$3,${num}d
-	jnz	.Lmul_enter
-	cmp	\$8,${num}d
-	jb	.Lmul_enter
-___
-$code.=<<___ if ($addx);
-	mov	OPENSSL_ia32cap_P+8(%rip),%r11d
-___
-$code.=<<___;
-	cmp	$ap,$bp
-	jne	.Lmul4x_enter
-	test	\$7,${num}d
-	jz	.Lsqr8x_enter
-	jmp	.Lmul4x_enter
-
-.align	16
-.Lmul_enter:
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-
-	mov	${num}d,${num}d
-	lea	2($num),%r10
-	mov	%rsp,%r11
-	neg	%r10
-	lea	(%rsp,%r10,8),%rsp	# tp=alloca(8*(num+2))
-	and	\$-1024,%rsp		# minimize TLB usage
-
-	mov	%r11,8(%rsp,$num,8)	# tp[num+1]=%rsp
-.Lmul_body:
-	mov	$bp,%r12		# reassign $bp
-___
-		$bp="%r12";
-$code.=<<___;
-	mov	($n0),$n0		# pull n0[0] value
-	mov	($bp),$m0		# m0=bp[0]
-	mov	($ap),%rax
-
-	xor	$i,$i			# i=0
-	xor	$j,$j			# j=0
-
-	mov	$n0,$m1
-	mulq	$m0			# ap[0]*bp[0]
-	mov	%rax,$lo0
-	mov	($np),%rax
-
-	imulq	$lo0,$m1		# "tp[0]"*n0
-	mov	%rdx,$hi0
-
-	mulq	$m1			# np[0]*m1
-	add	%rax,$lo0		# discarded
-	mov	8($ap),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$hi1
-
-	lea	1($j),$j		# j++
-	jmp	.L1st_enter
-
-.align	16
-.L1st:
-	add	%rax,$hi1
-	mov	($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$hi0,$hi1		# np[j]*m1+ap[j]*bp[0]
-	mov	$lo0,$hi0
-	adc	\$0,%rdx
-	mov	$hi1,-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$hi1
-
-.L1st_enter:
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$hi0
-	mov	($np,$j,8),%rax
-	adc	\$0,%rdx
-	lea	1($j),$j		# j++
-	mov	%rdx,$lo0
-
-	mulq	$m1			# np[j]*m1
-	cmp	$num,$j
-	jne	.L1st
-
-	add	%rax,$hi1
-	mov	($ap),%rax		# ap[0]
-	adc	\$0,%rdx
-	add	$hi0,$hi1		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$hi1,-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$hi1
-	mov	$lo0,$hi0
-
-	xor	%rdx,%rdx
-	add	$hi0,$hi1
-	adc	\$0,%rdx
-	mov	$hi1,-8(%rsp,$num,8)
-	mov	%rdx,(%rsp,$num,8)	# store upmost overflow bit
-
-	lea	1($i),$i		# i++
-	jmp	.Louter
-.align	16
-.Louter:
-	mov	($bp,$i,8),$m0		# m0=bp[i]
-	xor	$j,$j			# j=0
-	mov	$n0,$m1
-	mov	(%rsp),$lo0
-	mulq	$m0			# ap[0]*bp[i]
-	add	%rax,$lo0		# ap[0]*bp[i]+tp[0]
-	mov	($np),%rax
-	adc	\$0,%rdx
-
-	imulq	$lo0,$m1		# tp[0]*n0
-	mov	%rdx,$hi0
-
-	mulq	$m1			# np[0]*m1
-	add	%rax,$lo0		# discarded
-	mov	8($ap),%rax
-	adc	\$0,%rdx
-	mov	8(%rsp),$lo0		# tp[1]
-	mov	%rdx,$hi1
-
-	lea	1($j),$j		# j++
-	jmp	.Linner_enter
-
-.align	16
-.Linner:
-	add	%rax,$hi1
-	mov	($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$lo0,$hi1		# np[j]*m1+ap[j]*bp[i]+tp[j]
-	mov	(%rsp,$j,8),$lo0
-	adc	\$0,%rdx
-	mov	$hi1,-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$hi1
-
-.Linner_enter:
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$hi0
-	mov	($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	$hi0,$lo0		# ap[j]*bp[i]+tp[j]
-	mov	%rdx,$hi0
-	adc	\$0,$hi0
-	lea	1($j),$j		# j++
-
-	mulq	$m1			# np[j]*m1
-	cmp	$num,$j
-	jne	.Linner
-
-	add	%rax,$hi1
-	mov	($ap),%rax		# ap[0]
-	adc	\$0,%rdx
-	add	$lo0,$hi1		# np[j]*m1+ap[j]*bp[i]+tp[j]
-	mov	(%rsp,$j,8),$lo0
-	adc	\$0,%rdx
-	mov	$hi1,-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$hi1
-
-	xor	%rdx,%rdx
-	add	$hi0,$hi1
-	adc	\$0,%rdx
-	add	$lo0,$hi1		# pull upmost overflow bit
-	adc	\$0,%rdx
-	mov	$hi1,-8(%rsp,$num,8)
-	mov	%rdx,(%rsp,$num,8)	# store upmost overflow bit
-
-	lea	1($i),$i		# i++
-	cmp	$num,$i
-	jb	.Louter
-
-	xor	$i,$i			# i=0 and clear CF!
-	mov	(%rsp),%rax		# tp[0]
-	lea	(%rsp),$ap		# borrow ap for tp
-	mov	$num,$j			# j=num
-	jmp	.Lsub
-.align	16
-.Lsub:	sbb	($np,$i,8),%rax
-	mov	%rax,($rp,$i,8)		# rp[i]=tp[i]-np[i]
-	mov	8($ap,$i,8),%rax	# tp[i+1]
-	lea	1($i),$i		# i++
-	dec	$j			# doesn't affect CF!
-	jnz	.Lsub
-
-	sbb	\$0,%rax		# handle upmost overflow bit
-	xor	$i,$i
-	mov	$num,$j			# j=num
-.align	16
-.Lcopy:					# copy or in-place refresh
-	mov	(%rsp,$i,8),$ap
-	mov	($rp,$i,8),$np
-	xor	$np,$ap			# conditional select:
-	and	%rax,$ap		# ((ap ^ np) & %rax) ^ np
-	xor	$np,$ap			# ap = borrow?tp:rp
-	mov	$i,(%rsp,$i,8)		# zap temporary vector
-	mov	$ap,($rp,$i,8)		# rp[i]=tp[i]
-	lea	1($i),$i
-	sub	\$1,$j
-	jnz	.Lcopy
-
-	mov	8(%rsp,$num,8),%rsi	# restore %rsp
-	mov	\$1,%rax
-	mov	(%rsi),%r15
-	mov	8(%rsi),%r14
-	mov	16(%rsi),%r13
-	mov	24(%rsi),%r12
-	mov	32(%rsi),%rbp
-	mov	40(%rsi),%rbx
-	lea	48(%rsi),%rsp
-.Lmul_epilogue:
-	ret
-.size	bn_mul_mont,.-bn_mul_mont
-___
-{{{
-my @A=("%r10","%r11");
-my @N=("%r13","%rdi");
-$code.=<<___;
-.type	bn_mul4x_mont,\@function,6
-.align	16
-bn_mul4x_mont:
-.Lmul4x_enter:
-___
-$code.=<<___ if ($addx);
-	and	\$0x80100,%r11d
-	cmp	\$0x80100,%r11d
-	je	.Lmulx4x_enter
-___
-$code.=<<___;
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-
-	mov	${num}d,${num}d
-	lea	4($num),%r10
-	mov	%rsp,%r11
-	neg	%r10
-	lea	(%rsp,%r10,8),%rsp	# tp=alloca(8*(num+4))
-	and	\$-1024,%rsp		# minimize TLB usage
-
-	mov	%r11,8(%rsp,$num,8)	# tp[num+1]=%rsp
-.Lmul4x_body:
-	mov	$rp,16(%rsp,$num,8)	# tp[num+2]=$rp
-	mov	%rdx,%r12		# reassign $bp
-___
-		$bp="%r12";
-$code.=<<___;
-	mov	($n0),$n0		# pull n0[0] value
-	mov	($bp),$m0		# m0=bp[0]
-	mov	($ap),%rax
-
-	xor	$i,$i			# i=0
-	xor	$j,$j			# j=0
-
-	mov	$n0,$m1
-	mulq	$m0			# ap[0]*bp[0]
-	mov	%rax,$A[0]
-	mov	($np),%rax
-
-	imulq	$A[0],$m1		# "tp[0]"*n0
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[0]*m1
-	add	%rax,$A[0]		# discarded
-	mov	8($ap),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$N[1]
-
-	mulq	$m0
-	add	%rax,$A[1]
-	mov	8($np),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[0]
-
-	mulq	$m1
-	add	%rax,$N[1]
-	mov	16($ap),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]
-	lea	4($j),$j		# j++
-	adc	\$0,%rdx
-	mov	$N[1],(%rsp)
-	mov	%rdx,$N[0]
-	jmp	.L1st4x
-.align	16
-.L1st4x:
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[0]
-	mov	-16($np,$j,8),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	-8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[0],-24(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[1]
-	mov	-8($np,$j,8),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[1],-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[0]
-	mov	($np,$j,8),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[0],-8(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[1]
-	mov	8($np,$j,8),%rax
-	adc	\$0,%rdx
-	lea	4($j),$j		# j++
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	-16($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[1],-32(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-	cmp	$num,$j
-	jb	.L1st4x
-
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[0]
-	mov	-16($np,$j,8),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	-8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[0],-24(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[0]
-	add	%rax,$A[1]
-	mov	-8($np,$j,8),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	($ap),%rax		# ap[0]
-	adc	\$0,%rdx
-	add	$A[1],$N[1]		# np[j]*m1+ap[j]*bp[0]
-	adc	\$0,%rdx
-	mov	$N[1],-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-
-	xor	$N[1],$N[1]
-	add	$A[0],$N[0]
-	adc	\$0,$N[1]
-	mov	$N[0],-8(%rsp,$j,8)
-	mov	$N[1],(%rsp,$j,8)	# store upmost overflow bit
-
-	lea	1($i),$i		# i++
-.align	4
-.Louter4x:
-	mov	($bp,$i,8),$m0		# m0=bp[i]
-	xor	$j,$j			# j=0
-	mov	(%rsp),$A[0]
-	mov	$n0,$m1
-	mulq	$m0			# ap[0]*bp[i]
-	add	%rax,$A[0]		# ap[0]*bp[i]+tp[0]
-	mov	($np),%rax
-	adc	\$0,%rdx
-
-	imulq	$A[0],$m1		# tp[0]*n0
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[0]*m1
-	add	%rax,$A[0]		# "$N[0]", discarded
-	mov	8($ap),%rax
-	adc	\$0,%rdx
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[1]
-	mov	8($np),%rax
-	adc	\$0,%rdx
-	add	8(%rsp),$A[1]		# +tp[1]
-	adc	\$0,%rdx
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	16($ap),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]		# np[j]*m1+ap[j]*bp[i]+tp[j]
-	lea	4($j),$j		# j+=2
-	adc	\$0,%rdx
-	mov	$N[1],(%rsp)		# tp[j-1]
-	mov	%rdx,$N[0]
-	jmp	.Linner4x
-.align	16
-.Linner4x:
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[0]
-	mov	-16($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	-16(%rsp,$j,8),$A[0]	# ap[j]*bp[i]+tp[j]
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	-8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]
-	adc	\$0,%rdx
-	mov	$N[0],-24(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[1]
-	mov	-8($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	-8(%rsp,$j,8),$A[1]
-	adc	\$0,%rdx
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]
-	adc	\$0,%rdx
-	mov	$N[1],-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[0]
-	mov	($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	(%rsp,$j,8),$A[0]	# ap[j]*bp[i]+tp[j]
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]
-	adc	\$0,%rdx
-	mov	$N[0],-8(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[1]
-	mov	8($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	8(%rsp,$j,8),$A[1]
-	adc	\$0,%rdx
-	lea	4($j),$j		# j++
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	-16($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[1],$N[1]
-	adc	\$0,%rdx
-	mov	$N[1],-32(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-	cmp	$num,$j
-	jb	.Linner4x
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[0]
-	mov	-16($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	-16(%rsp,$j,8),$A[0]	# ap[j]*bp[i]+tp[j]
-	adc	\$0,%rdx
-	mov	%rdx,$A[1]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[0]
-	mov	-8($ap,$j,8),%rax
-	adc	\$0,%rdx
-	add	$A[0],$N[0]
-	adc	\$0,%rdx
-	mov	$N[0],-24(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[1]
-
-	mulq	$m0			# ap[j]*bp[i]
-	add	%rax,$A[1]
-	mov	-8($np,$j,8),%rax
-	adc	\$0,%rdx
-	add	-8(%rsp,$j,8),$A[1]
-	adc	\$0,%rdx
-	lea	1($i),$i		# i++
-	mov	%rdx,$A[0]
-
-	mulq	$m1			# np[j]*m1
-	add	%rax,$N[1]
-	mov	($ap),%rax		# ap[0]
-	adc	\$0,%rdx
-	add	$A[1],$N[1]
-	adc	\$0,%rdx
-	mov	$N[1],-16(%rsp,$j,8)	# tp[j-1]
-	mov	%rdx,$N[0]
-
-	xor	$N[1],$N[1]
-	add	$A[0],$N[0]
-	adc	\$0,$N[1]
-	add	(%rsp,$num,8),$N[0]	# pull upmost overflow bit
-	adc	\$0,$N[1]
-	mov	$N[0],-8(%rsp,$j,8)
-	mov	$N[1],(%rsp,$j,8)	# store upmost overflow bit
-
-	cmp	$num,$i
-	jb	.Louter4x
-___
-{
-my @ri=("%rax","%rdx",$m0,$m1);
-$code.=<<___;
-	mov	16(%rsp,$num,8),$rp	# restore $rp
-	mov	0(%rsp),@ri[0]		# tp[0]
-	mov	8(%rsp),@ri[1]		# tp[1]
-	shr	\$2,$num		# num/=4
-	lea	(%rsp),$ap		# borrow ap for tp
-	xor	$i,$i			# i=0 and clear CF!
-
-	sub	0($np),@ri[0]
-	mov	16($ap),@ri[2]		# tp[2]
-	mov	24($ap),@ri[3]		# tp[3]
-	sbb	8($np),@ri[1]
-	lea	-1($num),$j		# j=num/4-1
-	jmp	.Lsub4x
-.align	16
-.Lsub4x:
-	mov	@ri[0],0($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	mov	@ri[1],8($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	sbb	16($np,$i,8),@ri[2]
-	mov	32($ap,$i,8),@ri[0]	# tp[i+1]
-	mov	40($ap,$i,8),@ri[1]
-	sbb	24($np,$i,8),@ri[3]
-	mov	@ri[2],16($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	mov	@ri[3],24($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	sbb	32($np,$i,8),@ri[0]
-	mov	48($ap,$i,8),@ri[2]
-	mov	56($ap,$i,8),@ri[3]
-	sbb	40($np,$i,8),@ri[1]
-	lea	4($i),$i		# i++
-	dec	$j			# doesnn't affect CF!
-	jnz	.Lsub4x
-
-	mov	@ri[0],0($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	mov	32($ap,$i,8),@ri[0]	# load overflow bit
-	sbb	16($np,$i,8),@ri[2]
-	mov	@ri[1],8($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	sbb	24($np,$i,8),@ri[3]
-	mov	@ri[2],16($rp,$i,8)	# rp[i]=tp[i]-np[i]
-
-	sbb	\$0,@ri[0]		# handle upmost overflow bit
-	mov	@ri[0],%xmm0
-	punpcklqdq %xmm0,%xmm0		# extend mask to 128 bits
-	mov	@ri[3],24($rp,$i,8)	# rp[i]=tp[i]-np[i]
-	xor	$i,$i			# i=0
-
-	mov	$num,$j
-	pxor	%xmm5,%xmm5
-	jmp	.Lcopy4x
-.align	16
-.Lcopy4x:				# copy or in-place refresh
-	movdqu	(%rsp,$i),%xmm2
-	movdqu  16(%rsp,$i),%xmm4
-	movdqu	($rp,$i),%xmm1
-	movdqu	16($rp,$i),%xmm3
-	pxor	%xmm1,%xmm2		# conditional select
-	pxor	%xmm3,%xmm4
-	pand	%xmm0,%xmm2
-	pand	%xmm0,%xmm4
-	pxor	%xmm1,%xmm2
-	pxor	%xmm3,%xmm4
-	movdqu	%xmm2,($rp,$i)
-	movdqu  %xmm4,16($rp,$i)
-	movdqa	%xmm5,(%rsp,$i)		# zap temporary vectors
-	movdqa	%xmm5,16(%rsp,$i)
-
-	lea	32($i),$i
-	dec	$j
-	jnz	.Lcopy4x
-
-	shl	\$2,$num
-___
-}
-$code.=<<___;
-	mov	8(%rsp,$num,8),%rsi	# restore %rsp
-	mov	\$1,%rax
-	mov	(%rsi),%r15
-	mov	8(%rsi),%r14
-	mov	16(%rsi),%r13
-	mov	24(%rsi),%r12
-	mov	32(%rsi),%rbp
-	mov	40(%rsi),%rbx
-	lea	48(%rsi),%rsp
-.Lmul4x_epilogue:
-	ret
-.size	bn_mul4x_mont,.-bn_mul4x_mont
-___
-}}}
-{{{
-######################################################################
-# void bn_sqr8x_mont(
-my $rptr="%rdi";	# const BN_ULONG *rptr,
-my $aptr="%rsi";	# const BN_ULONG *aptr,
-my $bptr="%rdx";	# not used
-my $nptr="%rcx";	# const BN_ULONG *nptr,
-my $n0  ="%r8";		# const BN_ULONG *n0);
-my $num ="%r9";		# int num, has to be divisible by 8
-
-my ($i,$j,$tptr)=("%rbp","%rcx",$rptr);
-my @A0=("%r10","%r11");
-my @A1=("%r12","%r13");
-my ($a0,$a1,$ai)=("%r14","%r15","%rbx");
-
-$code.=<<___	if ($addx);
-.extern	bn_sqrx8x_internal		# see x86_64-mont5 module
-___
-$code.=<<___;
-.extern	bn_sqr8x_internal		# see x86_64-mont5 module
-
-.type	bn_sqr8x_mont,\@function,6
-.align	32
-bn_sqr8x_mont:
-.Lsqr8x_enter:
-	mov	%rsp,%rax
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-
-	mov	${num}d,%r10d
-	shl	\$3,${num}d		# convert $num to bytes
-	shl	\$3+2,%r10		# 4*$num
-	neg	$num
-
-	##############################################################
-	# ensure that stack frame doesn't alias with $aptr modulo
-	# 4096. this is done to allow memory disambiguation logic
-	# do its job.
-	#
-	lea	-64(%rsp,$num,4),%r11
-	mov	($n0),$n0		# *n0
-	sub	$aptr,%r11
-	and	\$4095,%r11
-	cmp	%r11,%r10
-	jb	.Lsqr8x_sp_alt
-	sub	%r11,%rsp		# align with $aptr
-	lea	-64(%rsp,$num,4),%rsp	# alloca(frame+4*$num)
-	jmp	.Lsqr8x_sp_done
-
-.align	32
-.Lsqr8x_sp_alt:
-	lea	4096-64(,$num,4),%r10	# 4096-frame-4*$num
-	lea	-64(%rsp,$num,4),%rsp	# alloca(frame+4*$num)
-	sub	%r10,%r11
-	mov	\$0,%r10
-	cmovc	%r10,%r11
-	sub	%r11,%rsp
-.Lsqr8x_sp_done:
-	and	\$-64,%rsp
-	mov	$num,%r10	
-	neg	$num
-
-	lea	64(%rsp,$num,2),%r11	# copy of modulus
-	mov	$n0,  32(%rsp)
-	mov	%rax, 40(%rsp)		# save original %rsp
-.Lsqr8x_body:
-
-	mov	$num,$i
-	movq	%r11, %xmm2		# save pointer to modulus copy
-	shr	\$3+2,$i
-	mov	OPENSSL_ia32cap_P+8(%rip),%eax
-	jmp	.Lsqr8x_copy_n
-
-.align	32
-.Lsqr8x_copy_n:
-	movq	8*0($nptr),%xmm0
-	movq	8*1($nptr),%xmm1
-	movq	8*2($nptr),%xmm3
-	movq	8*3($nptr),%xmm4
-	lea	8*4($nptr),$nptr
-	movdqa	%xmm0,16*0(%r11)
-	movdqa	%xmm1,16*1(%r11)
-	movdqa	%xmm3,16*2(%r11)
-	movdqa	%xmm4,16*3(%r11)
-	lea	16*4(%r11),%r11
-	dec	$i
-	jnz	.Lsqr8x_copy_n
-
-	pxor	%xmm0,%xmm0
-	movq	$rptr,%xmm1		# save $rptr
-	movq	%r10, %xmm3		# -$num
-___
-$code.=<<___ if ($addx);
-	and	\$0x80100,%eax
-	cmp	\$0x80100,%eax
-	jne	.Lsqr8x_nox
-
-	call	bn_sqrx8x_internal	# see x86_64-mont5 module
-
-	pxor	%xmm0,%xmm0
-	lea	48(%rsp),%rax
-	lea	64(%rsp,$num,2),%rdx
-	shr	\$3+2,$num
-	mov	40(%rsp),%rsi		# restore %rsp
-	jmp	.Lsqr8x_zero
-
-.align	32
-.Lsqr8x_nox:
-___
-$code.=<<___;
-	call	bn_sqr8x_internal	# see x86_64-mont5 module
-
-	pxor	%xmm0,%xmm0
-	lea	48(%rsp),%rax
-	lea	64(%rsp,$num,2),%rdx
-	shr	\$3+2,$num
-	mov	40(%rsp),%rsi		# restore %rsp
-	jmp	.Lsqr8x_zero
-
-.align	32
-.Lsqr8x_zero:
-	movdqa	%xmm0,16*0(%rax)	# wipe t
-	movdqa	%xmm0,16*1(%rax)
-	movdqa	%xmm0,16*2(%rax)
-	movdqa	%xmm0,16*3(%rax)
-	lea	16*4(%rax),%rax
-	movdqa	%xmm0,16*0(%rdx)	# wipe n
-	movdqa	%xmm0,16*1(%rdx)
-	movdqa	%xmm0,16*2(%rdx)
-	movdqa	%xmm0,16*3(%rdx)
-	lea	16*4(%rdx),%rdx
-	dec	$num
-	jnz	.Lsqr8x_zero
-
-	mov	\$1,%rax
-	mov	-48(%rsi),%r15
-	mov	-40(%rsi),%r14
-	mov	-32(%rsi),%r13
-	mov	-24(%rsi),%r12
-	mov	-16(%rsi),%rbp
-	mov	-8(%rsi),%rbx
-	lea	(%rsi),%rsp
-.Lsqr8x_epilogue:
-	ret
-.size	bn_sqr8x_mont,.-bn_sqr8x_mont
-___
-}}}
-
-if ($addx) {{{
-my $bp="%rdx";	# original value
-
-$code.=<<___;
-.type	bn_mulx4x_mont,\@function,6
-.align	32
-bn_mulx4x_mont:
-.Lmulx4x_enter:
-	mov	%rsp,%rax
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-
-	shl	\$3,${num}d		# convert $num to bytes
-	.byte	0x67
-	xor	%r10,%r10
-	sub	$num,%r10		# -$num
-	mov	($n0),$n0		# *n0
-	lea	-72(%rsp,%r10),%rsp	# alloca(frame+$num+8)
-	lea	($bp,$num),%r10
-	and	\$-128,%rsp
-	##############################################################
-	# Stack layout
-	# +0	num
-	# +8	off-loaded &b[i]
-	# +16	end of b[num]
-	# +24	saved n0
-	# +32	saved rp
-	# +40	saved %rsp
-	# +48	inner counter
-	# +56
-	# +64	tmp[num+1]
-	#
-	mov	$num,0(%rsp)		# save $num
-	shr	\$5,$num
-	mov	%r10,16(%rsp)		# end of b[num]
-	sub	\$1,$num
-	mov	$n0, 24(%rsp)		# save *n0
-	mov	$rp, 32(%rsp)		# save $rp
-	mov	%rax,40(%rsp)		# save original %rsp
-	mov	$num,48(%rsp)		# inner counter
-	jmp	.Lmulx4x_body
-
-.align	32
-.Lmulx4x_body:
-___
-my ($aptr, $bptr, $nptr, $tptr, $mi,  $bi,  $zero, $num)=
-   ("%rsi","%rdi","%rcx","%rbx","%r8","%r9","%rbp","%rax");
-my $rptr=$bptr;
-$code.=<<___;
-	lea	8($bp),$bptr
-	mov	($bp),%rdx		# b[0], $bp==%rdx actually
-	lea	64+32(%rsp),$tptr
-	mov	%rdx,$bi
-
-	mulx	0*8($aptr),$mi,%rax	# a[0]*b[0]
-	mulx	1*8($aptr),%r11,%r14	# a[1]*b[0]
-	add	%rax,%r11
-	mov	$bptr,8(%rsp)		# off-load &b[i]
-	mulx	2*8($aptr),%r12,%r13	# ...
-	adc	%r14,%r12
-	adc	\$0,%r13
-
-	mov	$mi,$bptr		# borrow $bptr
-	imulq	24(%rsp),$mi		# "t[0]"*n0
-	xor	$zero,$zero		# cf=0, of=0
-
-	mulx	3*8($aptr),%rax,%r14
-	 mov	$mi,%rdx
-	lea	4*8($aptr),$aptr
-	adcx	%rax,%r13
-	adcx	$zero,%r14		# cf=0
-
-	mulx	0*8($nptr),%rax,%r10
-	adcx	%rax,$bptr		# discarded
-	adox	%r11,%r10
-	mulx	1*8($nptr),%rax,%r11
-	adcx	%rax,%r10
-	adox	%r12,%r11
-	.byte	0xc4,0x62,0xfb,0xf6,0xa1,0x10,0x00,0x00,0x00	# mulx	2*8($nptr),%rax,%r12
-	mov	48(%rsp),$bptr		# counter value
-	mov	%r10,-4*8($tptr)
-	adcx	%rax,%r11
-	adox	%r13,%r12
-	mulx	3*8($nptr),%rax,%r15
-	 mov	$bi,%rdx
-	mov	%r11,-3*8($tptr)
-	adcx	%rax,%r12
-	adox	$zero,%r15		# of=0
-	lea	4*8($nptr),$nptr
-	mov	%r12,-2*8($tptr)
-
-	jmp	.Lmulx4x_1st
-
-.align	32
-.Lmulx4x_1st:
-	adcx	$zero,%r15		# cf=0, modulo-scheduled
-	mulx	0*8($aptr),%r10,%rax	# a[4]*b[0]
-	adcx	%r14,%r10
-	mulx	1*8($aptr),%r11,%r14	# a[5]*b[0]
-	adcx	%rax,%r11
-	mulx	2*8($aptr),%r12,%rax	# ...
-	adcx	%r14,%r12
-	mulx	3*8($aptr),%r13,%r14
-	 .byte	0x67,0x67
-	 mov	$mi,%rdx
-	adcx	%rax,%r13
-	adcx	$zero,%r14		# cf=0
-	lea	4*8($aptr),$aptr
-	lea	4*8($tptr),$tptr
-
-	adox	%r15,%r10
-	mulx	0*8($nptr),%rax,%r15
-	adcx	%rax,%r10
-	adox	%r15,%r11
-	mulx	1*8($nptr),%rax,%r15
-	adcx	%rax,%r11
-	adox	%r15,%r12
-	mulx	2*8($nptr),%rax,%r15
-	mov	%r10,-5*8($tptr)
-	adcx	%rax,%r12
-	mov	%r11,-4*8($tptr)
-	adox	%r15,%r13
-	mulx	3*8($nptr),%rax,%r15
-	 mov	$bi,%rdx
-	mov	%r12,-3*8($tptr)
-	adcx	%rax,%r13
-	adox	$zero,%r15
-	lea	4*8($nptr),$nptr
-	mov	%r13,-2*8($tptr)
-
-	dec	$bptr			# of=0, pass cf
-	jnz	.Lmulx4x_1st
-
-	mov	0(%rsp),$num		# load num
-	mov	8(%rsp),$bptr		# re-load &b[i]
-	adc	$zero,%r15		# modulo-scheduled
-	add	%r15,%r14
-	sbb	%r15,%r15		# top-most carry
-	mov	%r14,-1*8($tptr)
-	jmp	.Lmulx4x_outer
-
-.align	32
-.Lmulx4x_outer:
-	mov	($bptr),%rdx		# b[i]
-	lea	8($bptr),$bptr		# b++
-	sub	$num,$aptr		# rewind $aptr
-	mov	%r15,($tptr)		# save top-most carry
-	lea	64+4*8(%rsp),$tptr
-	sub	$num,$nptr		# rewind $nptr
-
-	mulx	0*8($aptr),$mi,%r11	# a[0]*b[i]
-	xor	%ebp,%ebp		# xor	$zero,$zero	# cf=0, of=0
-	mov	%rdx,$bi
-	mulx	1*8($aptr),%r14,%r12	# a[1]*b[i]
-	adox	-4*8($tptr),$mi
-	adcx	%r14,%r11
-	mulx	2*8($aptr),%r15,%r13	# ...
-	adox	-3*8($tptr),%r11
-	adcx	%r15,%r12
-	adox	$zero,%r12
-	adcx	$zero,%r13
-
-	mov	$bptr,8(%rsp)		# off-load &b[i]
-	.byte	0x67
-	mov	$mi,%r15
-	imulq	24(%rsp),$mi		# "t[0]"*n0
-	xor	%ebp,%ebp		# xor	$zero,$zero	# cf=0, of=0
-
-	mulx	3*8($aptr),%rax,%r14
-	 mov	$mi,%rdx
-	adox	-2*8($tptr),%r12
-	adcx	%rax,%r13
-	adox	-1*8($tptr),%r13
-	adcx	$zero,%r14
-	lea	4*8($aptr),$aptr
-	adox	$zero,%r14
-
-	mulx	0*8($nptr),%rax,%r10
-	adcx	%rax,%r15		# discarded
-	adox	%r11,%r10
-	mulx	1*8($nptr),%rax,%r11
-	adcx	%rax,%r10
-	adox	%r12,%r11
-	mulx	2*8($nptr),%rax,%r12
-	mov	%r10,-4*8($tptr)
-	adcx	%rax,%r11
-	adox	%r13,%r12
-	mulx	3*8($nptr),%rax,%r15
-	 mov	$bi,%rdx
-	mov	%r11,-3*8($tptr)
-	lea	4*8($nptr),$nptr
-	adcx	%rax,%r12
-	adox	$zero,%r15		# of=0
-	mov	48(%rsp),$bptr		# counter value
-	mov	%r12,-2*8($tptr)
-
-	jmp	.Lmulx4x_inner
-
-.align	32
-.Lmulx4x_inner:
-	mulx	0*8($aptr),%r10,%rax	# a[4]*b[i]
-	adcx	$zero,%r15		# cf=0, modulo-scheduled
-	adox	%r14,%r10
-	mulx	1*8($aptr),%r11,%r14	# a[5]*b[i]
-	adcx	0*8($tptr),%r10
-	adox	%rax,%r11
-	mulx	2*8($aptr),%r12,%rax	# ...
-	adcx	1*8($tptr),%r11
-	adox	%r14,%r12
-	mulx	3*8($aptr),%r13,%r14
-	 mov	$mi,%rdx
-	adcx	2*8($tptr),%r12
-	adox	%rax,%r13
-	adcx	3*8($tptr),%r13
-	adox	$zero,%r14		# of=0
-	lea	4*8($aptr),$aptr
-	lea	4*8($tptr),$tptr
-	adcx	$zero,%r14		# cf=0
-
-	adox	%r15,%r10
-	mulx	0*8($nptr),%rax,%r15
-	adcx	%rax,%r10
-	adox	%r15,%r11
-	mulx	1*8($nptr),%rax,%r15
-	adcx	%rax,%r11
-	adox	%r15,%r12
-	mulx	2*8($nptr),%rax,%r15
-	mov	%r10,-5*8($tptr)
-	adcx	%rax,%r12
-	adox	%r15,%r13
-	mulx	3*8($nptr),%rax,%r15
-	 mov	$bi,%rdx
-	mov	%r11,-4*8($tptr)
-	mov	%r12,-3*8($tptr)
-	adcx	%rax,%r13
-	adox	$zero,%r15
-	lea	4*8($nptr),$nptr
-	mov	%r13,-2*8($tptr)
-
-	dec	$bptr			# of=0, pass cf
-	jnz	.Lmulx4x_inner
-
-	mov	0(%rsp),$num		# load num
-	mov	8(%rsp),$bptr		# re-load &b[i]
-	adc	$zero,%r15		# modulo-scheduled
-	sub	0*8($tptr),$zero	# pull top-most carry
-	adc	%r15,%r14
-	mov	-8($nptr),$mi
-	sbb	%r15,%r15		# top-most carry
-	mov	%r14,-1*8($tptr)
-
-	cmp	16(%rsp),$bptr
-	jne	.Lmulx4x_outer
-
-	sub	%r14,$mi		# compare top-most words
-	sbb	$mi,$mi
-	or	$mi,%r15
-
-	neg	$num
-	xor	%rdx,%rdx
-	mov	32(%rsp),$rptr		# restore rp
-	lea	64(%rsp),$tptr
-
-	pxor	%xmm0,%xmm0
-	mov	0*8($nptr,$num),%r8
-	mov	1*8($nptr,$num),%r9
-	neg	%r8
-	jmp	.Lmulx4x_sub_entry
-
-.align	32
-.Lmulx4x_sub:
-	mov	0*8($nptr,$num),%r8
-	mov	1*8($nptr,$num),%r9
-	not	%r8
-.Lmulx4x_sub_entry:
-	mov	2*8($nptr,$num),%r10
-	not	%r9
-	and	%r15,%r8
-	mov	3*8($nptr,$num),%r11
-	not	%r10
-	and	%r15,%r9
-	not	%r11
-	and	%r15,%r10
-	and	%r15,%r11
-
-	neg	%rdx			# mov %rdx,%cf
-	adc	0*8($tptr),%r8
-	adc	1*8($tptr),%r9
-	movdqa	%xmm0,($tptr)
-	adc	2*8($tptr),%r10
-	adc	3*8($tptr),%r11
-	movdqa	%xmm0,16($tptr)
-	lea	4*8($tptr),$tptr
-	sbb	%rdx,%rdx		# mov %cf,%rdx
-
-	mov	%r8,0*8($rptr)
-	mov	%r9,1*8($rptr)
-	mov	%r10,2*8($rptr)
-	mov	%r11,3*8($rptr)
-	lea	4*8($rptr),$rptr
-
-	add	\$32,$num
-	jnz	.Lmulx4x_sub
-
-	mov	40(%rsp),%rsi		# restore %rsp
-	mov	\$1,%rax
-	mov	-48(%rsi),%r15
-	mov	-40(%rsi),%r14
-	mov	-32(%rsi),%r13
-	mov	-24(%rsi),%r12
-	mov	-16(%rsi),%rbp
-	mov	-8(%rsi),%rbx
-	lea	(%rsi),%rsp
-.Lmulx4x_epilogue:
-	ret
-.size	bn_mulx4x_mont,.-bn_mulx4x_mont
-___
-}}}
-$code.=<<___;
-.asciz	"Montgomery Multiplication for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-.align	16
-___
-
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-if ($win64) {
-$rec="%rcx";
-$frame="%rdx";
-$context="%r8";
-$disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	mul_handler,\@abi-omnipotent
-.align	16
-mul_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	mov	8($disp),%rsi		# disp->ImageBase
-	mov	56($disp),%r11		# disp->HandlerData
-
-	mov	0(%r11),%r10d		# HandlerData[0]
-	lea	(%rsi,%r10),%r10	# end of prologue label
-	cmp	%r10,%rbx		# context->Rip<end of prologue label
-	jb	.Lcommon_seh_tail
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	mov	4(%r11),%r10d		# HandlerData[1]
-	lea	(%rsi,%r10),%r10	# epilogue label
-	cmp	%r10,%rbx		# context->Rip>=epilogue label
-	jae	.Lcommon_seh_tail
-
-	mov	192($context),%r10	# pull $num
-	mov	8(%rax,%r10,8),%rax	# pull saved stack pointer
-	lea	48(%rax),%rax
-
-	mov	-8(%rax),%rbx
-	mov	-16(%rax),%rbp
-	mov	-24(%rax),%r12
-	mov	-32(%rax),%r13
-	mov	-40(%rax),%r14
-	mov	-48(%rax),%r15
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%rbp,160($context)	# restore context->Rbp
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R13
-	mov	%r14,232($context)	# restore context->R14
-	mov	%r15,240($context)	# restore context->R15
-
-	jmp	.Lcommon_seh_tail
-.size	mul_handler,.-mul_handler
-
-.type	sqr_handler,\@abi-omnipotent
-.align	16
-sqr_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	mov	8($disp),%rsi		# disp->ImageBase
-	mov	56($disp),%r11		# disp->HandlerData
-
-	mov	0(%r11),%r10d		# HandlerData[0]
-	lea	(%rsi,%r10),%r10	# end of prologue label
-	cmp	%r10,%rbx		# context->Rip<.Lsqr_body
-	jb	.Lcommon_seh_tail
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	mov	4(%r11),%r10d		# HandlerData[1]
-	lea	(%rsi,%r10),%r10	# epilogue label
-	cmp	%r10,%rbx		# context->Rip>=.Lsqr_epilogue
-	jae	.Lcommon_seh_tail
-
-	mov	40(%rax),%rax		# pull saved stack pointer
-
-	mov	-8(%rax),%rbx
-	mov	-16(%rax),%rbp
-	mov	-24(%rax),%r12
-	mov	-32(%rax),%r13
-	mov	-40(%rax),%r14
-	mov	-48(%rax),%r15
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%rbp,160($context)	# restore context->Rbp
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R13
-	mov	%r14,232($context)	# restore context->R14
-	mov	%r15,240($context)	# restore context->R15
-
-.Lcommon_seh_tail:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	sqr_handler,.-sqr_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_bn_mul_mont
-	.rva	.LSEH_end_bn_mul_mont
-	.rva	.LSEH_info_bn_mul_mont
-
-	.rva	.LSEH_begin_bn_mul4x_mont
-	.rva	.LSEH_end_bn_mul4x_mont
-	.rva	.LSEH_info_bn_mul4x_mont
-
-	.rva	.LSEH_begin_bn_sqr8x_mont
-	.rva	.LSEH_end_bn_sqr8x_mont
-	.rva	.LSEH_info_bn_sqr8x_mont
-___
-$code.=<<___ if ($addx);
-	.rva	.LSEH_begin_bn_mulx4x_mont
-	.rva	.LSEH_end_bn_mulx4x_mont
-	.rva	.LSEH_info_bn_mulx4x_mont
-___
-$code.=<<___;
-.section	.xdata
-.align	8
-.LSEH_info_bn_mul_mont:
-	.byte	9,0,0,0
-	.rva	mul_handler
-	.rva	.Lmul_body,.Lmul_epilogue	# HandlerData[]
-.LSEH_info_bn_mul4x_mont:
-	.byte	9,0,0,0
-	.rva	mul_handler
-	.rva	.Lmul4x_body,.Lmul4x_epilogue	# HandlerData[]
-.LSEH_info_bn_sqr8x_mont:
-	.byte	9,0,0,0
-	.rva	sqr_handler
-	.rva	.Lsqr8x_body,.Lsqr8x_epilogue	# HandlerData[]
-___
-$code.=<<___ if ($addx);
-.LSEH_info_bn_mulx4x_mont:
-	.byte	9,0,0,0
-	.rva	sqr_handler
-	.rva	.Lmulx4x_body,.Lmulx4x_epilogue	# HandlerData[]
-___
-}
-
-print $code;
-close STDOUT;