rice 2.1.1 → 4.0.0

data/missing

@@ -1,215 +0,0 @@
-#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
-
-scriptversion=2013-10-28.13; # UTC
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try '$0 --help' for more information"
-  exit 1
-fi
-
-case $1 in
-
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
-
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  bison     yacc      flex         lex       help2man
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: unknown '$1' option"
-    echo 1>&2 "Try '$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
-
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  case $normalized_program in
-    autoconf*)
-      echo "You should only need it if you modified 'configure.ac',"
-      echo "or m4 files included by it."
-      program_details 'autoconf'
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

data/post-autoconf.rb

@@ -1,22 +0,0 @@
-require 'fileutils'
-require 'find'
-
-def process(file)
-  puts "Post-processing #{file}"
-  File.open(file) do |input|
-    File.open("#{file}.pp", "w") do |output|
-      input.each_line do |line|
-        yield output, line
-      end
-    end
-  end
-  FileUtils.mv("#{file}.pp", "#{file}")
-end
-
-process("configure") do |out, line|
-  # autoconf doesn't properly enclose $srcdir and $am_aux_dir in quotes
-  line.gsub!(/([^"'])(\$srcdir)/, '\1"\2"')
-  line.gsub!(/([^"'])(\$am_aux_dir)/, '\1\"\2\"')
-  out.puts line
-end
-FileUtils.chmod(0700, "configure")

data/post-automake.rb

@@ -1,28 +0,0 @@
-require 'fileutils'
-require 'find'
-
-def process(file)
-  puts "Post-processing #{file}"
-  File.open(file) do |input|
-    File.open("#{file}.pp", "w") do |output|
-      input.each_line do |line|
-        yield output, line
-      end
-    end
-  end
-  FileUtils.mv("#{file}.pp", "#{file}")
-end
-
-Find.find(".") do |file|
-  if file =~ /Makefile.in$/ then
-    process(file) do |out, line|
-      # automake doesn't properly enclose $distdir in quotes
-      if line !~ /echo / then
-        line.gsub!(/([^"'])(\$\(distdir\))/, '\1"\2"')
-      end
-      line.gsub!(/(\$\(MKDIR_P\).*`)/, 'eval \1')
-      out.puts line
-    end
-  end
-end
-

data/rice/Address_Registration_Guard.cpp

@@ -1,22 +0,0 @@
-#include "Address_Registration_Guard.hpp"
-
-bool Rice::Address_Registration_Guard::enabled = true;
-bool Rice::Address_Registration_Guard::exit_handler_registered = false;
-
-static void disable_all_guards(VALUE)
-{
-    Rice::Address_Registration_Guard::disable();
-}
-
-void Rice::Address_Registration_Guard::registerExitHandler()
-{
-    if (exit_handler_registered) return;
-    rb_set_end_proc(&disable_all_guards, Qnil);
-    exit_handler_registered = true;
-}
-
-void Rice::Address_Registration_Guard::disable()
-{
-    enabled = false;
-}
-

data/rice/Arg_impl.hpp

@@ -1,129 +0,0 @@
-#ifndef Rice__Arg_Impl_hpp_
-#define Rice__Arg_Impl_hpp_
-
-namespace Rice {
-
-  //! Helper for defining default arguments of a method
-  /*! This class exposes the ability to define the default values of a
-   *  wrapped method. Inspired by how Boost.Python handles keyword and
-   *  default arguments, the syntax is simple:
-   *
-   *  \code
-   *    define_method(
-   *      "method",
-   *      &method,
-   *      (Arg("arg1"), Arg("arg2") = 3, Arg("arg3") = true)
-   *    );
-   *  \endcode
-   *
-   *  which means "for method &method, it takes 3 arguments
-   *  [arg1, arg2, arg3]. Of these arguments, arg2's default is 3
-   *  and arg3's default is true.
-   *
-   *  It may be required to explicitly cast the type of the default
-   *  value to prevent compilation errors.
-   */
-  class Arg
-  {
-    public:
-      //! Initialize a new Arg with the name of the argument
-      /*! We require the name of the argument because 1) it makes code
-       *  easier to read and 2) hopefully Ruby gets keyword arguments
-       *  in the future and this means Rice will be ready for it.
-       */
-      Arg(const char* name)
-        : name_(name)
-        , defaultValue(0)
-      {}
-
-      //! Copy Constructor
-      Arg(const Arg& other)
-        : name_(other.name()),
-          defaultValue(other.defaultValue ? other.defaultValue->clone() : 0)
-      {}
-
-      virtual ~Arg()
-      {
-        if(defaultValue) {
-          delete defaultValue;
-        }
-      }
-
-      //! Set the default value for this Arg
-      /*! Set the default value for this argument.
-       *  If this isn't called on this Arg, then this
-       *  Arg is required in the method call.
-       *
-       *  \param val the value to store as default
-       */
-      template<typename Arg_Type>
-      Arg& operator=(Arg_Type val)
-      {
-        defaultValue = new type<Arg_Type>(val);
-        return *this;
-      }
-
-      //! Check if this Arg has a default value associated with it
-      bool hasDefaultValue() const {
-        return defaultValue != 0;
-      }
-
-      //! Return the default value associated with this Arg
-      /*! \return the type saved to this Arg
-       */
-      template<typename Arg_Type>
-      Arg_Type getDefaultValue()
-      {
-        return static_cast< type<Arg_Type>* >(defaultValue)->held;
-      }
-
-      //! Get the name of this Arg
-      const char* name() const
-      {
-        return name_;
-      }
-
-    private:
-
-      //! Name of the argument
-      const char* name_;
-
-      /**
-       * The following is a stripped down version of
-       * Boost.Any.
-       */
-
-      class type_base
-      {
-        public:
-          virtual ~type_base() {}
-          virtual type_base* clone() const = 0;
-      };
-
-      template<typename Type>
-      class type : public type_base
-      {
-        public:
-          type(Type value)
-            :held(value)
-          {}
-
-          virtual ~type() { }
-
-          virtual type_base* clone() const
-          {
-            return new type(held);
-          }
-
-          Type held;
-      };
-
-    public:
-
-      //! Our saved default value
-      type_base* defaultValue;
-  };
-
-}
-
-#endif // Rice__Arg_Impl_hpp_

data/rice/Arg_operators.cpp

@@ -1,21 +0,0 @@
-#include "Arg_impl.hpp"
-#include "detail/Arguments.hpp"
-#include "Arg_operators.hpp"
-
-namespace Rice {
-
-  Arguments* operator,(Arg arg1, Arg arg2)
-  {
-    Arguments* a = new Arguments();
-    a->add(arg1);
-    a->add(arg2);
-    return a;
-  }
-
-  Arguments* operator,(Arguments* arguments, Arg arg)
-  {
-    arguments->add(arg);
-    return arguments;
-  }
-
-}

data/rice/Arg_operators.hpp

@@ -1,19 +0,0 @@
-#ifndef Rice__Arg_Operators_hpp_
-#define Rice__Arg_Operators_hpp_
-
-namespace Rice
-{
-
-  //! Build the list of Arg objects into an Arguments object
-  /*! Take a list of Arg objects and build up a single Argument
-   *  object used later in method dispatch
-   */
-  Arguments* operator,(Arg arg1, Arg arg2);
-
-  /*! @see operator,(Arg, Arg)
-   */
-  Arguments* operator,(Arguments* arguments, Arg arg);
-
-}
-
-#endif // Rice__Arg_Operators_hpp_