rice 2.1.1 → 4.0.0

data/README.mingw

@@ -1,8 +0,0 @@
-Assuming you are using the one-click installer, you can build against it
-using mingw by configuring with the following command:
-
-  $ CPPFLAGS=-D_MSC_VER=1200 LIBS=-lmsvcp60 ./configure 
-
-Rice includes a number of customizations to allow it to work in this
-configuration.  See [ruby-core:8264] for more details.
-

data/aclocal.m4

@@ -1,1088 +0,0 @@
-# generated automatically by aclocal 1.15 -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 2002-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.15'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.15], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.15])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-# Expand $ac_aux_dir to an absolute path.
-am_aux_dir=`cd "$ac_aux_dir" && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
-      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
-      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
-      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
-      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                    [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
-  [--enable-dependency-tracking],
-  [do not reject slow dependency extractors])
-AS_HELP_STRING(
-  [--disable-dependency-tracking],
-  [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Older Autoconf quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "$am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
-m4_define([AC_PROG_CC],
-m4_defn([AC_PROG_CC])
-[_AM_PROG_CC_C_O
-])
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-             [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
-  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
-  [ok:ok],,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target (and possibly the TAP driver).  The
-# system "awk" is bad on some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES([CC])],
-		  [m4_define([AC_PROG_CC],
-			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES([CXX])],
-		  [m4_define([AC_PROG_CXX],
-			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES([OBJC])],
-		  [m4_define([AC_PROG_OBJC],
-			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
-		  [_AM_DEPENDENCIES([OBJCXX])],
-		  [m4_define([AC_PROG_OBJCXX],
-			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes.  So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
-  cat >&2 <<'END'
-Oops!
-
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present.  This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message.  This
-can help us improve future automake versions.
-
-END
-  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
-    echo 'Configuration will proceed anyway, since you have set the' >&2
-    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
-    echo >&2
-  else
-    cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
-    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
-  fi
-fi
-dnl The trailing newline in this macro's definition is deliberate, for
-dnl backward compatibility and to allow trailing 'dnl'-style comments
-dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING "
-else
-  am_missing_run=
-  AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
-  [AC_MSG_CHECKING([that generated files are newer than configure])
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
-  [--enable-silent-rules],
-  [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
-  [--disable-silent-rules],
-  [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
-   [am_cv_make_support_nested_variables],
-   [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
-	@$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
-  am_cv_make_support_nested_variables=yes
-else
-  am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
-  dnl Using '$V' instead of '$(V)' breaks IRIX make.
-  AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
-  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
-  [m4_case([$1],
-    [ustar],
-     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
-      # There is notably a 21 bits limit for the UID and the GID.  In fact,
-      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
-      # and bug#13588).
-      am_max_uid=2097151 # 2^21 - 1
-      am_max_gid=$am_max_uid
-      # The $UID and $GID variables are not portable, so we need to resort
-      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
-      # below are definitely unexpected, so allow the users to see them
-      # (that is, avoid stderr redirection).
-      am_uid=`id -u || echo unknown`
-      am_gid=`id -g || echo unknown`
-      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
-      if test $am_uid -le $am_max_uid; then
-         AC_MSG_RESULT([yes])
-      else
-         AC_MSG_RESULT([no])
-         _am_tools=none
-      fi
-      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
-      if test $am_gid -le $am_max_gid; then
-         AC_MSG_RESULT([yes])
-      else
-        AC_MSG_RESULT([no])
-        _am_tools=none
-      fi],
-
-  [pax],
-    [],
-
-  [m4_fatal([Unknown tar format])])
-
-  AC_MSG_CHECKING([how to create a $1 tar archive])
-
-  # Go ahead even if we have the value already cached.  We do so because we
-  # need to set the values for the 'am__tar' and 'am__untar' variables.
-  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
-  for _am_tool in $_am_tools; do
-    case $_am_tool in
-    gnutar)
-      for _am_tar in tar gnutar gtar; do
-        AM_RUN_LOG([$_am_tar --version]) && break
-      done
-      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-      am__untar="$_am_tar -xf -"
-      ;;
-    plaintar)
-      # Must skip GNU tar: if it does not support --format= it doesn't create
-      # ustar tarball either.
-      (tar --version) >/dev/null 2>&1 && continue
-      am__tar='tar chf - "$$tardir"'
-      am__tar_='tar chf - "$tardir"'
-      am__untar='tar xf -'
-      ;;
-    pax)
-      am__tar='pax -L -x $1 -w "$$tardir"'
-      am__tar_='pax -L -x $1 -w "$tardir"'
-      am__untar='pax -r'
-      ;;
-    cpio)
-      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-      am__untar='cpio -i -H $1 -d'
-      ;;
-    none)
-      am__tar=false
-      am__tar_=false
-      am__untar=false
-      ;;
-    esac
-
-    # If the value was cached, stop now.  We just wanted to have am__tar
-    # and am__untar set.
-    test -n "${am_cv_prog_tar_$1}" && break
-
-    # tar/untar a dummy directory, and stop if the command works.
-    rm -rf conftest.dir
-    mkdir conftest.dir
-    echo GrepMe > conftest.dir/file
-    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-    rm -rf conftest.dir
-    if test -s conftest.tar; then
-      AM_RUN_LOG([$am__untar <conftest.tar])
-      AM_RUN_LOG([cat conftest.dir/file])
-      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-    fi
-  done
-  rm -rf conftest.dir
-
-  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-