ric 0.12.0 → 0.14.1

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/key_value.rb

@@ -0,0 +1,206 @@
+# frozen_string_literal: true
+
+require 'i18n/backend/base'
+
+module I18n
+
+  begin
+    require 'oj'
+    class JSON
+      class << self
+        def encode(value)
+          Oj::Rails.encode(value)
+        end
+        def decode(value)
+          Oj.load(value)
+        end
+      end
+    end
+  rescue LoadError
+    require 'active_support/json'
+    JSON = ActiveSupport::JSON
+  end
+
+  module Backend
+    # This is a basic backend for key value stores. It receives on
+    # initialization the store, which should respond to three methods:
+    #
+    # * store#[](key)         - Used to get a value
+    # * store#[]=(key, value) - Used to set a value
+    # * store#keys            - Used to get all keys
+    #
+    # Since these stores only supports string, all values are converted
+    # to JSON before being stored, allowing it to also store booleans,
+    # hashes and arrays. However, this store does not support Procs.
+    #
+    # As the ActiveRecord backend, Symbols are just supported when loading
+    # translations from the filesystem or through explicit store translations.
+    #
+    # Also, avoid calling I18n.available_locales since it's a somehow
+    # expensive operation in most stores.
+    #
+    # == Example
+    #
+    # To setup I18n to use TokyoCabinet in memory is quite straightforward:
+    #
+    #   require 'rufus/tokyo/cabinet' # gem install rufus-tokyo
+    #   I18n.backend = I18n::Backend::KeyValue.new(Rufus::Tokyo::Cabinet.new('*'))
+    #
+    # == Performance
+    #
+    # You may make this backend even faster by including the Memoize module.
+    # However, notice that you should properly clear the cache if you change
+    # values directly in the key-store.
+    #
+    # == Subtrees
+    #
+    # In most backends, you are allowed to retrieve part of a translation tree:
+    #
+    #   I18n.backend.store_translations :en, :foo => { :bar => :baz }
+    #   I18n.t "foo" #=> { :bar => :baz }
+    #
+    # This backend supports this feature by default, but it slows down the storage
+    # of new data considerably and makes hard to delete entries. That said, you are
+    # allowed to disable the storage of subtrees on initialization:
+    #
+    #   I18n::Backend::KeyValue.new(@store, false)
+    #
+    # This is useful if you are using a KeyValue backend chained to a Simple backend.
+    class KeyValue
+      using I18n::HashRefinements
+
+      module Implementation
+        attr_accessor :store
+
+        include Base, Flatten
+
+        def initialize(store, subtrees=true)
+          @store, @subtrees = store, subtrees
+        end
+
+        def initialized?
+          !@store.nil?
+        end
+
+        def store_translations(locale, data, options = EMPTY_HASH)
+          escape = options.fetch(:escape, true)
+          flatten_translations(locale, data, escape, @subtrees).each do |key, value|
+            key = "#{locale}.#{key}"
+
+            case value
+            when Hash
+              if @subtrees && (old_value = @store[key])
+                old_value = JSON.decode(old_value)
+                value = old_value.deep_symbolize_keys.deep_merge!(value) if old_value.is_a?(Hash)
+              end
+            when Proc
+              raise "Key-value stores cannot handle procs"
+            end
+
+            @store[key] = JSON.encode(value) unless value.is_a?(Symbol)
+          end
+        end
+
+        def available_locales
+          locales = @store.keys.map { |k| k =~ /\./; $` }
+          locales.uniq!
+          locales.compact!
+          locales.map! { |k| k.to_sym }
+          locales
+        end
+
+      protected
+
+        # Queries the translations from the key-value store and converts
+        # them into a hash such as the one returned from loading the
+        # haml files
+        def translations
+          @translations = @store.keys.clone.map do |main_key|
+            main_value = JSON.decode(@store[main_key])
+            main_key.to_s.split(".").reverse.inject(main_value) do |value, key|
+              {key.to_sym => value}
+            end
+          end.inject{|hash, elem| hash.deep_merge!(elem)}.deep_symbolize_keys
+        end
+
+        def init_translations
+          # NO OP
+          # This call made also inside Simple Backend and accessed by
+          # other plugins like I18n-js and babilu and
+          # to use it along with the Chain backend we need to
+          # provide a uniform API even for protected methods :S
+        end
+
+        def subtrees?
+          @subtrees
+        end
+
+        def lookup(locale, key, scope = [], options = EMPTY_HASH)
+          key   = normalize_flat_keys(locale, key, scope, options[:separator])
+          value = @store["#{locale}.#{key}"]
+          value = JSON.decode(value) if value
+
+          if value.is_a?(Hash)
+            value.deep_symbolize_keys
+          elsif !value.nil?
+            value
+          elsif !@subtrees
+            SubtreeProxy.new("#{locale}.#{key}", @store)
+          end
+        end
+
+        def pluralize(locale, entry, count)
+          if subtrees?
+            super
+          else
+            return entry unless entry.is_a?(Hash)
+            key = pluralization_key(entry, count)
+            entry[key]
+          end
+        end
+      end
+
+      class SubtreeProxy
+        def initialize(master_key, store)
+          @master_key = master_key
+          @store = store
+          @subtree = nil
+        end
+
+        def has_key?(key)
+          @subtree && @subtree.has_key?(key) || self[key]
+        end
+
+        def [](key)
+          unless @subtree && value = @subtree[key]
+            value = @store["#{@master_key}.#{key}"]
+            if value
+              value = JSON.decode(value)
+              (@subtree ||= {})[key] = value
+            end
+          end
+          value
+        end
+
+        def is_a?(klass)
+          Hash == klass || super
+        end
+        alias :kind_of? :is_a?
+
+        def instance_of?(klass)
+          Hash == klass || super
+        end
+
+        def nil?
+          @subtree.nil?
+        end
+
+        def inspect
+          @subtree.inspect
+        end
+      end
+
+      include Implementation
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/memoize.rb

@@ -0,0 +1,54 @@
+# frozen_string_literal: true
+
+# Memoize module simply memoizes the values returned by lookup using
+# a flat hash and can tremendously speed up the lookup process in a backend.
+#
+# To enable it you can simply include the Memoize module to your backend:
+#
+#   I18n::Backend::Simple.include(I18n::Backend::Memoize)
+#
+# Notice that it's the responsibility of the backend to define whenever the
+# cache should be cleaned.
+module I18n
+  module Backend
+    module Memoize
+      def available_locales
+        @memoized_locales ||= super
+      end
+
+      def store_translations(locale, data, options = EMPTY_HASH)
+        reset_memoizations!(locale)
+        super
+      end
+
+      def reload!
+        reset_memoizations!
+        super
+      end
+
+      def eager_load!
+        memoized_lookup
+        available_locales
+        super
+      end
+
+      protected
+
+        def lookup(locale, key, scope = nil, options = EMPTY_HASH)
+          flat_key  = I18n::Backend::Flatten.normalize_flat_keys(locale,
+            key, scope, options[:separator]).to_sym
+          flat_hash = memoized_lookup[locale.to_sym]
+          flat_hash.key?(flat_key) ? flat_hash[flat_key] : (flat_hash[flat_key] = super)
+        end
+
+        def memoized_lookup
+          @memoized_lookup ||= I18n.new_double_nested_cache
+        end
+
+        def reset_memoizations!(locale=nil)
+          @memoized_locales = nil
+          (locale ? memoized_lookup[locale.to_sym] : memoized_lookup).clear
+        end
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/metadata.rb

@@ -0,0 +1,71 @@
+# frozen_string_literal: true
+
+# I18n translation metadata is useful when you want to access information
+# about how a translation was looked up, pluralized or interpolated in
+# your application.
+#
+#   msg = I18n.t(:message, :default => 'Hi!', :scope => :foo)
+#   msg.translation_metadata
+#   # => { :key => :message, :scope => :foo, :default => 'Hi!' }
+#
+# If a :count option was passed to #translate it will be set to the metadata.
+# Likewise, if any interpolation variables were passed they will also be set.
+#
+# To enable translation metadata you can simply include the Metadata module
+# into the Simple backend class - or whatever other backend you are using:
+#
+#   I18n::Backend::Simple.include(I18n::Backend::Metadata)
+#
+module I18n
+  module Backend
+    module Metadata
+      class << self
+        def included(base)
+          Object.class_eval do
+            def translation_metadata
+              unless self.frozen?
+                @translation_metadata ||= {}
+              else
+                {}
+              end
+            end
+
+            def translation_metadata=(translation_metadata)
+              @translation_metadata = translation_metadata unless self.frozen?
+            end
+          end unless Object.method_defined?(:translation_metadata)
+        end
+      end
+
+      def translate(locale, key, options = EMPTY_HASH)
+        metadata = {
+          :locale    => locale,
+          :key       => key,
+          :scope     => options[:scope],
+          :default   => options[:default],
+          :separator => options[:separator],
+          :values    => options.reject { |name, _value| RESERVED_KEYS.include?(name) }
+        }
+        with_metadata(metadata) { super }
+      end
+
+      def interpolate(locale, entry, values = EMPTY_HASH)
+        metadata = entry.translation_metadata.merge(:original => entry)
+        with_metadata(metadata) { super }
+      end
+
+      def pluralize(locale, entry, count)
+        with_metadata(:count => count) { super }
+      end
+
+      protected
+
+        def with_metadata(metadata, &block)
+          result = yield
+          result.translation_metadata = result.translation_metadata.merge(metadata) if result
+          result
+        end
+
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/pluralization.rb

@@ -0,0 +1,55 @@
+# frozen_string_literal: true
+
+# I18n Pluralization are useful when you want your application to
+# customize pluralization rules.
+#
+# To enable locale specific pluralizations you can simply include the
+# Pluralization module to the Simple backend - or whatever other backend you
+# are using.
+#
+#   I18n::Backend::Simple.include(I18n::Backend::Pluralization)
+#
+# You also need to make sure to provide pluralization algorithms to the
+# backend, i.e. include them to your I18n.load_path accordingly.
+module I18n
+  module Backend
+    module Pluralization
+      # Overwrites the Base backend translate method so that it will check the
+      # translation meta data space (:i18n) for a locale specific pluralization
+      # rule and use it to pluralize the given entry. I.e. the library expects
+      # pluralization rules to be stored at I18n.t(:'i18n.plural.rule')
+      #
+      # Pluralization rules are expected to respond to #call(count) and
+      # return a pluralization key. Valid keys depend on the translation data
+      # hash (entry) but it is generally recommended to follow CLDR's style,
+      # i.e., return one of the keys :zero, :one, :few, :many, :other.
+      #
+      # The :zero key is always picked directly when count equals 0 AND the
+      # translation data has the key :zero. This way translators are free to
+      # either pick a special :zero translation even for languages where the
+      # pluralizer does not return a :zero key.
+      def pluralize(locale, entry, count)
+        return entry unless entry.is_a?(Hash) && count
+
+        pluralizer = pluralizer(locale)
+        if pluralizer.respond_to?(:call)
+          key = count == 0 && entry.has_key?(:zero) ? :zero : pluralizer.call(count)
+          raise InvalidPluralizationData.new(entry, count, key) unless entry.has_key?(key)
+          entry[key]
+        else
+          super
+        end
+      end
+
+      protected
+
+        def pluralizers
+          @pluralizers ||= {}
+        end
+
+        def pluralizer(locale)
+          pluralizers[locale] ||= I18n.t(:'i18n.plural.rule', :locale => locale, :resolve => false)
+        end
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/simple.rb

@@ -0,0 +1,108 @@
+# frozen_string_literal: true
+
+require 'i18n/backend/base'
+
+module I18n
+  module Backend
+    # A simple backend that reads translations from YAML files and stores them in
+    # an in-memory hash. Relies on the Base backend.
+    #
+    # The implementation is provided by a Implementation module allowing to easily
+    # extend Simple backend's behavior by including modules. E.g.:
+    #
+    # module I18n::Backend::Pluralization
+    #   def pluralize(*args)
+    #     # extended pluralization logic
+    #     super
+    #   end
+    # end
+    #
+    # I18n::Backend::Simple.include(I18n::Backend::Pluralization)
+    class Simple
+      using I18n::HashRefinements
+
+      module Implementation
+        include Base
+
+        def initialized?
+          @initialized ||= false
+        end
+
+        # Stores translations for the given locale in memory.
+        # This uses a deep merge for the translations hash, so existing
+        # translations will be overwritten by new ones only at the deepest
+        # level of the hash.
+        def store_translations(locale, data, options = EMPTY_HASH)
+          if I18n.enforce_available_locales &&
+            I18n.available_locales_initialized? &&
+            !I18n.locale_available?(locale)
+            return data
+          end
+          locale = locale.to_sym
+          translations[locale] ||= Concurrent::Hash.new
+          data = data.deep_symbolize_keys
+          translations[locale].deep_merge!(data)
+        end
+
+        # Get available locales from the translations hash
+        def available_locales
+          init_translations unless initialized?
+          translations.inject([]) do |locales, (locale, data)|
+            locales << locale unless data.size <= 1 && (data.empty? || data.has_key?(:i18n))
+            locales
+          end
+        end
+
+        # Clean up translations hash and set initialized to false on reload!
+        def reload!
+          @initialized = false
+          @translations = nil
+          super
+        end
+
+        def eager_load!
+          init_translations unless initialized?
+          super
+        end
+
+        def translations(do_init: false)
+          # To avoid returning empty translations,
+          # call `init_translations`
+          init_translations if do_init && !initialized?
+
+          @translations ||= Concurrent::Hash.new { |h, k| h[k] = Concurrent::Hash.new }
+        end
+
+      protected
+
+        def init_translations
+          load_translations
+          @initialized = true
+        end
+
+        # Looks up a translation from the translations hash. Returns nil if
+        # either key is nil, or locale, scope or key do not exist as a key in the
+        # nested translations hash. Splits keys or scopes containing dots
+        # into multiple keys, i.e. <tt>currency.format</tt> is regarded the same as
+        # <tt>%w(currency format)</tt>.
+        def lookup(locale, key, scope = [], options = EMPTY_HASH)
+          init_translations unless initialized?
+          keys = I18n.normalize_keys(locale, key, scope, options[:separator])
+
+          keys.inject(translations) do |result, _key|
+            return nil unless result.is_a?(Hash)
+            unless result.has_key?(_key)
+              _key = _key.to_s.to_sym
+              return nil unless result.has_key?(_key)
+            end
+            result = result[_key]
+            result = resolve(locale, _key, result, options.merge(:scope => nil)) if result.is_a?(Symbol)
+            result
+          end
+        end
+      end
+
+      include Implementation
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend/transliterator.rb

@@ -0,0 +1,108 @@
+# encoding: utf-8
+# frozen_string_literal: true
+
+module I18n
+  module Backend
+    module Transliterator
+      DEFAULT_REPLACEMENT_CHAR = "?"
+
+      # Given a locale and a UTF-8 string, return the locale's ASCII
+      # approximation for the string.
+      def transliterate(locale, string, replacement = nil)
+        @transliterators ||= {}
+        @transliterators[locale] ||= Transliterator.get I18n.t(:'i18n.transliterate.rule',
+          :locale => locale, :resolve => false, :default => {})
+        @transliterators[locale].transliterate(string, replacement)
+      end
+
+      # Get a transliterator instance.
+      def self.get(rule = nil)
+        if !rule || rule.kind_of?(Hash)
+          HashTransliterator.new(rule)
+        elsif rule.kind_of? Proc
+          ProcTransliterator.new(rule)
+        else
+          raise I18n::ArgumentError, "Transliteration rule must be a proc or a hash."
+        end
+      end
+
+      # A transliterator which accepts a Proc as its transliteration rule.
+      class ProcTransliterator
+        def initialize(rule)
+          @rule = rule
+        end
+
+        def transliterate(string, replacement = nil)
+          @rule.call(string)
+        end
+      end
+
+      # A transliterator which accepts a Hash of characters as its translation
+      # rule.
+      class HashTransliterator
+        DEFAULT_APPROXIMATIONS = {
+          "À"=>"A", "Á"=>"A", "Â"=>"A", "Ã"=>"A", "Ä"=>"A", "Å"=>"A", "Æ"=>"AE",
+          "Ç"=>"C", "È"=>"E", "É"=>"E", "Ê"=>"E", "Ë"=>"E", "Ì"=>"I", "Í"=>"I",
+          "Î"=>"I", "Ï"=>"I", "Ð"=>"D", "Ñ"=>"N", "Ò"=>"O", "Ó"=>"O", "Ô"=>"O",
+          "Õ"=>"O", "Ö"=>"O", "×"=>"x", "Ø"=>"O", "Ù"=>"U", "Ú"=>"U", "Û"=>"U",
+          "Ü"=>"U", "Ý"=>"Y", "Þ"=>"Th", "ß"=>"ss", "à"=>"a", "á"=>"a", "â"=>"a",
+          "ã"=>"a", "ä"=>"a", "å"=>"a", "æ"=>"ae", "ç"=>"c", "è"=>"e", "é"=>"e",
+          "ê"=>"e", "ë"=>"e", "ì"=>"i", "í"=>"i", "î"=>"i", "ï"=>"i", "ð"=>"d",
+          "ñ"=>"n", "ò"=>"o", "ó"=>"o", "ô"=>"o", "õ"=>"o", "ö"=>"o", "ø"=>"o",
+          "ù"=>"u", "ú"=>"u", "û"=>"u", "ü"=>"u", "ý"=>"y", "þ"=>"th", "ÿ"=>"y",
+          "Ā"=>"A", "ā"=>"a", "Ă"=>"A", "ă"=>"a", "Ą"=>"A", "ą"=>"a", "Ć"=>"C",
+          "ć"=>"c", "Ĉ"=>"C", "ĉ"=>"c", "Ċ"=>"C", "ċ"=>"c", "Č"=>"C", "č"=>"c",
+          "Ď"=>"D", "ď"=>"d", "Đ"=>"D", "đ"=>"d", "Ē"=>"E", "ē"=>"e", "Ĕ"=>"E",
+          "ĕ"=>"e", "Ė"=>"E", "ė"=>"e", "Ę"=>"E", "ę"=>"e", "Ě"=>"E", "ě"=>"e",
+          "Ĝ"=>"G", "ĝ"=>"g", "Ğ"=>"G", "ğ"=>"g", "Ġ"=>"G", "ġ"=>"g", "Ģ"=>"G",
+          "ģ"=>"g", "Ĥ"=>"H", "ĥ"=>"h", "Ħ"=>"H", "ħ"=>"h", "Ĩ"=>"I", "ĩ"=>"i",
+          "Ī"=>"I", "ī"=>"i", "Ĭ"=>"I", "ĭ"=>"i", "Į"=>"I", "į"=>"i", "İ"=>"I",
+          "ı"=>"i", "IJ"=>"IJ", "ij"=>"ij", "Ĵ"=>"J", "ĵ"=>"j", "Ķ"=>"K", "ķ"=>"k",
+          "ĸ"=>"k", "Ĺ"=>"L", "ĺ"=>"l", "Ļ"=>"L", "ļ"=>"l", "Ľ"=>"L", "ľ"=>"l",
+          "Ŀ"=>"L", "ŀ"=>"l", "Ł"=>"L", "ł"=>"l", "Ń"=>"N", "ń"=>"n", "Ņ"=>"N",
+          "ņ"=>"n", "Ň"=>"N", "ň"=>"n", "ʼn"=>"'n", "Ŋ"=>"NG", "ŋ"=>"ng",
+          "Ō"=>"O", "ō"=>"o", "Ŏ"=>"O", "ŏ"=>"o", "Ő"=>"O", "ő"=>"o", "Œ"=>"OE",
+          "œ"=>"oe", "Ŕ"=>"R", "ŕ"=>"r", "Ŗ"=>"R", "ŗ"=>"r", "Ř"=>"R", "ř"=>"r",
+          "Ś"=>"S", "ś"=>"s", "Ŝ"=>"S", "ŝ"=>"s", "Ş"=>"S", "ş"=>"s", "Š"=>"S",
+          "š"=>"s", "Ţ"=>"T", "ţ"=>"t", "Ť"=>"T", "ť"=>"t", "Ŧ"=>"T", "ŧ"=>"t",
+          "Ũ"=>"U", "ũ"=>"u", "Ū"=>"U", "ū"=>"u", "Ŭ"=>"U", "ŭ"=>"u", "Ů"=>"U",
+          "ů"=>"u", "Ű"=>"U", "ű"=>"u", "Ų"=>"U", "ų"=>"u", "Ŵ"=>"W", "ŵ"=>"w",
+          "Ŷ"=>"Y", "ŷ"=>"y", "Ÿ"=>"Y", "Ź"=>"Z", "ź"=>"z", "Ż"=>"Z", "ż"=>"z",
+          "Ž"=>"Z", "ž"=>"z"
+        }.freeze
+
+        def initialize(rule = nil)
+          @rule = rule
+          add_default_approximations
+          add rule if rule
+        end
+
+        def transliterate(string, replacement = nil)
+          replacement ||= DEFAULT_REPLACEMENT_CHAR
+          string.gsub(/[^\x00-\x7f]/u) do |char|
+            approximations[char] || replacement
+          end
+        end
+
+        private
+
+        def approximations
+          @approximations ||= {}
+        end
+
+        def add_default_approximations
+          DEFAULT_APPROXIMATIONS.each do |key, value|
+            approximations[key] = value
+          end
+        end
+
+        # Add transliteration rules to the approximations hash.
+        def add(hash)
+          hash.each do |key, value|
+            approximations[key.to_s] = value.to_s
+          end
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/i18n-1.8.11/lib/i18n/backend.rb

@@ -0,0 +1,21 @@
+# frozen_string_literal: true
+
+module I18n
+  module Backend
+    autoload :Base,                  'i18n/backend/base'
+    autoload :InterpolationCompiler, 'i18n/backend/interpolation_compiler'
+    autoload :Cache,                 'i18n/backend/cache'
+    autoload :CacheFile,             'i18n/backend/cache_file'
+    autoload :Cascade,               'i18n/backend/cascade'
+    autoload :Chain,                 'i18n/backend/chain'
+    autoload :Fallbacks,             'i18n/backend/fallbacks'
+    autoload :Flatten,               'i18n/backend/flatten'
+    autoload :Gettext,               'i18n/backend/gettext'
+    autoload :KeyValue,              'i18n/backend/key_value'
+    autoload :Memoize,               'i18n/backend/memoize'
+    autoload :Metadata,              'i18n/backend/metadata'
+    autoload :Pluralization,         'i18n/backend/pluralization'
+    autoload :Simple,                'i18n/backend/simple'
+    autoload :Transliterator,        'i18n/backend/transliterator'
+  end
+end