rails_pulse 0.3.3 → 0.4.0.pre.2

data/config/initializers/rails_pulse.rb

@@ -1,287 +0,0 @@
-RailsPulse.configure do |config|
-  # ====================================================================================================
-  #                                         GLOBAL CONFIGURATION
-  # ====================================================================================================
-
-  # Enable or disable Rails Pulse
-  config.enabled = true
-
-  # ====================================================================================================
-  #                                               THRESHOLDS
-  # ====================================================================================================
-  # These thresholds are used to determine if a route, request, or query is slow, very slow, or critical.
-  # Values are in milliseconds (ms). Adjust these based on your application's performance requirements.
-
-  # Thresholds for an individual route
-  config.route_thresholds = {
-    slow:      500,
-    very_slow: 1500,
-    critical:  3000
-  }
-
-  # Thresholds for an individual request
-  config.request_thresholds = {
-    slow:      700,
-    very_slow: 2000,
-    critical:  4000
-  }
-
-  # Thresholds for an individual database query
-  config.query_thresholds = {
-    slow:      100,
-    very_slow: 500,
-    critical:  1000
-  }
-
-  # ====================================================================================================
-  #                                        SERVICE LEVEL OBJECTIVES (SLO)
-  # ====================================================================================================
-  # Define Service Level Objectives to visualize performance targets on the dashboard.
-  # These SLOs appear as dashed threshold lines on the performance charts, color-matched
-  # to their percentile series (green for P95, blue for P99).
-  #
-  # SLO Configuration:
-  #   :percentile - Must be 95 or 99 (binds to the matching chart series)
-  #   :threshold  - Maximum acceptable response time in milliseconds
-
-  # SLO for HTTP request response times (shown on Response Time Percentiles chart)
-  # config.service_level_objectives = [
-  #   { percentile: 95, threshold: 200 },
-  #   { percentile: 99, threshold: 500 }
-  # ]
-
-  # SLO for database query execution times (shown on Query Performance chart)
-  # Query SLOs should typically be 5-10x stricter than request SLOs
-  # config.query_service_level_objectives = [
-  #   { percentile: 95, threshold: 50 },
-  #   { percentile: 99, threshold: 100 }
-  # ]
-
-  # ====================================================================================================
-  #                                               FILTERING
-  # ====================================================================================================
-
-  # Asset Tracking Configuration
-  # By default, Rails Pulse ignores asset requests (images, CSS, JS files) to focus on application performance.
-  # Set track_assets to true if you want to monitor asset delivery performance.
-  config.track_assets = false
-
-  # Custom asset patterns to ignore (in addition to the built-in defaults)
-  # Only applies when track_assets is false. Add patterns for app-specific asset paths.
-  config.custom_asset_patterns = [
-    # Example: ignore specific asset directories
-    # %r{^/uploads/},
-    # %r{^/media/},
-    # "/special-assets/"
-  ]
-
-  # Rails Pulse Mount Path (optional)
-  # If Rails Pulse is mounted at a custom path, specify it here to prevent
-  # Rails Pulse from tracking its own requests. Leave as nil for default '/rails_pulse'.
-  # Examples:
-  #   config.mount_path = "/admin/monitoring"
-  config.mount_path = nil
-
-  # Manual route filtering
-  # Specify additional routes, requests, or queries to ignore from performance tracking.
-  # Each array can include strings (exact matches) or regular expressions.
-  #
-  # Examples:
-  #   config.ignored_routes   = ["/health_check", %r{^/admin}]
-  #   config.ignored_requests = ["GET /status", %r{POST /api/v1/.*}]
-  #   config.ignored_queries  = ["SELECT 1", %r{FROM \"schema_migrations\"}]
-
-  config.ignored_routes   = []
-  config.ignored_requests = []
-  config.ignored_queries  = []
-
-  # ====================================================================================================
-  #                                                 TAGGING
-  # ====================================================================================================
-  # Define custom tags for categorizing routes, requests, and queries.
-  # You can add any custom tags you want for filtering and organization.
-  #
-  # Tag names should be in present tense and describe the current state or category.
-  # Examples of good tag names:
-  #   - "critical" (for high-priority endpoints)
-  #   - "experimental" (for routes under development)
-  #   - "deprecated" (for routes being phased out)
-  #   - "external" (for third-party API calls)
-  #   - "background" (for async job-related operations)
-  #   - "admin" (for administrative routes)
-  #   - "public" (for public-facing routes)
-  #
-  # Example configuration:
-  #   config.tags = ["ignored", "critical", "experimental", "deprecated", "external", "admin"]
-
-  config.tags = [ "ignored", "critical", "experimental" ]
-
-  # ====================================================================================================
-  #                                            BACKGROUND JOBS
-  # ====================================================================================================
-  # Configure background job monitoring and tracking.
-  # When enabled, Rails Pulse will track job executions, durations, failures, and retries.
-  # Supports ActiveJob, Sidekiq, and Delayed Job.
-
-  # Enable or disable background job tracking
-  config.track_jobs = false
-
-  # Thresholds for job execution times (in milliseconds)
-  config.job_thresholds = {
-    slow:      5_000,   # 5 seconds
-    very_slow: 30_000,  # 30 seconds
-    critical:  60_000   # 1 minute
-  }
-
-  # Job classes to ignore from tracking (by class name)
-  # Examples:
-  #   config.ignored_jobs = ["ActionMailer::MailDeliveryJob", "MyApp::HealthCheckJob"]
-  config.ignored_jobs = []
-
-  # Queue names to ignore from tracking
-  # Examples:
-  #   config.ignored_queues = ["low_priority", "mailers"]
-  config.ignored_queues = []
-
-  # Capture job arguments for debugging (may contain sensitive data)
-  # Set to false in production to avoid storing potentially sensitive information
-  config.capture_job_arguments = true
-
-  # ====================================================================================================
-  #                                            DATABASE CONFIGURATION
-  # ====================================================================================================
-  # Configure Rails Pulse to use a separate database for performance monitoring data.
-  # This is optional but recommended for production applications to isolate performance
-  # data from your main application database.
-  #
-  # Uncomment and configure one of the following patterns:
-
-  # Option 1: Separate single database for Rails Pulse
-  # config.connects_to = {
-  #   database: { writing: :rails_pulse, reading: :rails_pulse }
-  # }
-
-  # Option 2: Primary/replica configuration for Rails Pulse
-  # config.connects_to = {
-  #   database: { writing: :rails_pulse_primary, reading: :rails_pulse_replica }
-  # }
-
-  # Don't forget to add the database configuration to config/database.yml:
-  #
-  # production:
-  #   # ... your main database config ...
-  #   rails_pulse:
-  #     adapter: postgresql  # or mysql2, sqlite3
-  #     database: myapp_rails_pulse_production
-  #     username: rails_pulse_user
-  #     password: <%= Rails.application.credentials.dig(:rails_pulse, :database_password) %>
-  #     host: localhost
-  #     pool: 5
-
-  # ====================================================================================================
-  #                                            AUTHENTICATION
-  # ====================================================================================================
-  # Configure authentication to secure access to the Rails Pulse dashboard.
-  # Authentication is ENABLED BY DEFAULT in production environments for security.
-  #
-  # If no authentication method is configured, Rails Pulse will use HTTP Basic Auth
-  # with credentials from RAILS_PULSE_USERNAME (default: 'admin') and RAILS_PULSE_PASSWORD
-  # environment variables. Set RAILS_PULSE_PASSWORD to enable this fallback.
-  #
-  # Uncomment and configure one of the following patterns based on your authentication system:
-
-  # Enable/disable authentication (enabled by default in production)
-  # config.authentication_enabled = Rails.env.production?
-
-  # Where to redirect unauthorized users
-  # config.authentication_redirect_path = "/"
-
-  # Custom authentication method - choose one of the examples below:
-
-  # Example 1: Devise with admin role check
-  # config.authentication_method = proc {
-  #   unless user_signed_in? && current_user.admin?
-  #     redirect_to main_app.root_path, alert: "Access denied"
-  #   end
-  # }
-
-  # Example 2: Custom session-based authentication
-  # config.authentication_method = proc {
-  #   unless session[:user_id] && User.find_by(id: session[:user_id])&.admin?
-  #     redirect_to main_app.login_path, alert: "Please log in as an admin"
-  #   end
-  # }
-
-  # Example 3: Warden authentication
-  # config.authentication_method = proc {
-  #   warden.authenticate!(:scope => :admin)
-  # }
-
-  # Example 4: Basic HTTP authentication
-  # config.authentication_method = proc {
-  #   authenticate_or_request_with_http_basic do |username, password|
-  #     username == ENV['RAILS_PULSE_USERNAME'] && password == ENV['RAILS_PULSE_PASSWORD']
-  #   end
-  # }
-
-  # Example 5: Custom authorization check
-  # config.authentication_method = proc {
-  #   current_user = User.find_by(id: session[:user_id])
-  #   unless current_user&.can_access_rails_pulse?
-  #     render plain: "Forbidden", status: :forbidden
-  #   end
-  # }
-
-  # ====================================================================================================
-  #                                             DEPLOYMENT TRACKING
-  # ====================================================================================================
-  # Record deployments to display vertical marker lines on performance charts, making it easy
-  # to correlate performance changes with specific releases.
-  #
-  # API token for the POST /rails_pulse/deployments endpoint.
-  # When set, requests must include an `X-Rails-Pulse-Token` header matching this value.
-  # When nil, the endpoint falls back to the standard dashboard authentication.
-  #
-  # Set this in your CI/CD pipeline and store the value in credentials or an environment variable:
-  #   config.deployment_api_token = Rails.application.credentials.dig(:rails_pulse, :deployment_api_token)
-  #   config.deployment_api_token = ENV["RAILS_PULSE_DEPLOYMENT_TOKEN"]
-  #
-  # Record a deployment from your CI/CD pipeline:
-  #   curl -X POST https://yourapp.com/rails_pulse/deployments \
-  #     -H "X-Rails-Pulse-Token: $RAILS_PULSE_DEPLOYMENT_TOKEN" \
-  #     -H "Content-Type: application/json" \
-  #     -d '{"deployment": {"revision": "abc1234", "metadata": {"environment": "production"}}}'
-  #
-  # Or use the rake task for simple shell-based deploys:
-  #   rake rails_pulse:record_deployment[abc1234]
-
-  # config.deployment_api_token = ENV["RAILS_PULSE_DEPLOYMENT_TOKEN"]
-
-  # ====================================================================================================
-  #                                               DATA CLEANUP
-  # ====================================================================================================
-  # Configure automatic cleanup of old performance data to manage database size.
-  # Rails Pulse provides two cleanup mechanisms that work together:
-  #
-  # 1. Time-based cleanup: Delete records older than the retention period
-  # 2. Count-based cleanup: Keep only the specified number of records per table
-  #
-  # Cleanup order respects foreign key constraints:
-  # operations → requests → queries/routes
-
-  # Enable or disable automatic data cleanup
-  config.archiving_enabled = true
-
-  # Time-based retention - delete records older than this period
-  config.full_retention_period = 2.weeks
-
-  # Count-based retention - maximum records to keep per table
-  # After time-based cleanup, if tables still exceed these limits,
-  # the oldest remaining records will be deleted to stay under the limit
-  config.max_table_records = {
-    rails_pulse_requests: 10000,    # HTTP requests (moderate volume)
-    rails_pulse_operations: 50000,  # Operations within requests (high volume)
-    rails_pulse_routes: 1000,       # Unique routes (low volume)
-    rails_pulse_queries: 500        # Normalized SQL queries (low volume)
-  }
-end

data/public/rails-pulse-assets/csp-test.js

@@ -1,120 +0,0 @@
-// CSP Test functionality
-// Tests asset loading and AJAX requests under strict Content Security Policy
-
-document.addEventListener('DOMContentLoaded', function() {
-  // Check asset loading status
-  checkAssetLoadingStatus();
-
-  // Setup AJAX button
-  setupAjaxButton();
-
-  // Check for CSP violations
-  checkCspViolations();
-});
-
-function checkAssetLoadingStatus() {
-  const cssStatus = document.getElementById('css-status');
-  const jsStatus = document.getElementById('js-status');
-  const iconsStatus = document.getElementById('icons-status');
-  const stimulusStatus = document.getElementById('stimulus-status');
-
-  // Check if CSS is loaded by testing if styles are applied
-  if (cssStatus) {
-    const testElement = document.querySelector('.card');
-    if (testElement && getComputedStyle(testElement).backgroundColor !== 'rgba(0, 0, 0, 0)') {
-      cssStatus.textContent = 'Loaded';
-      cssStatus.className = 'badge badge--success';
-    } else {
-      cssStatus.textContent = 'Failed';
-      cssStatus.className = 'badge badge--error';
-    }
-  }
-
-  // Check if JS is loaded (this script proves it)
-  if (jsStatus) {
-    jsStatus.textContent = 'Loaded';
-    jsStatus.className = 'badge badge--success';
-  }
-
-  // Check if icons script is loaded
-  if (iconsStatus) {
-    if (typeof window.RailsPulseIcons !== 'undefined') {
-      iconsStatus.textContent = 'Loaded';
-      iconsStatus.className = 'badge badge--success';
-    } else {
-      iconsStatus.textContent = 'Failed';
-      iconsStatus.className = 'badge badge--error';
-    }
-  }
-
-  // Check if Stimulus is active
-  if (stimulusStatus) {
-    if (window.Stimulus && typeof window.Stimulus.getControllerForElementAndIdentifier === 'function') {
-      stimulusStatus.textContent = 'Active';
-      stimulusStatus.className = 'badge badge--success';
-    } else {
-      stimulusStatus.textContent = 'Inactive';
-      stimulusStatus.className = 'badge badge--error';
-    }
-  }
-}
-
-function setupAjaxButton() {
-  const ajaxButton = document.getElementById('ajax-test-btn');
-  const ajaxResult = document.getElementById('ajax-result');
-
-  if (ajaxButton && ajaxResult) {
-    ajaxButton.addEventListener('click', function() {
-      // Update UI to show loading state
-      ajaxButton.disabled = true;
-      ajaxButton.textContent = 'Loading...';
-      ajaxResult.innerHTML = '<span class="text-subtle">Making AJAX request...</span>';
-
-      // Make AJAX request to the JSON endpoint
-      fetch('/rails_pulse/csp_test.json', {
-        method: 'GET',
-        headers: {
-          'Accept': 'application/json',
-          'Content-Type': 'application/json'
-        },
-        credentials: 'same-origin'
-      })
-      .then(response => {
-        if (!response.ok) {
-          throw new Error('Network response was not ok');
-        }
-        return response.json();
-      })
-      .then(data => {
-        // Success - display the success message
-        ajaxResult.innerHTML = '<span class="text-success">AJAX request completed successfully</span>';
-        ajaxButton.textContent = 'Test AJAX Loading';
-        ajaxButton.disabled = false;
-      })
-      .catch(error => {
-        // Error handling
-        console.error('AJAX request failed:', error);
-        ajaxResult.innerHTML = '<span class="text-error">AJAX request failed: ' + error.message + '</span>';
-        ajaxButton.textContent = 'Test AJAX Loading';
-        ajaxButton.disabled = false;
-      });
-    });
-  }
-}
-
-function checkCspViolations() {
-  const violationCount = document.getElementById('violation-count');
-
-  if (violationCount) {
-    // Start with 0 violations and mark as success immediately
-    let violations = 0;
-    violationCount.className = 'badge badge--success';
-
-    // Listen for CSP violations
-    document.addEventListener('securitypolicyviolation', function() {
-      violations++;
-      violationCount.textContent = violations.toString();
-      violationCount.className = 'badge badge--error';
-    });
-  }
-}

data/public/rails-pulse-assets/rails-pulse-icons.js.map

@@ -1,13 +0,0 @@
-{
-  "version": 3,
-  "file": "rails-pulse-icons.js",
-  "sourceRoot": "",
-  "sources": [
-    "rails-pulse-icons.js"
-  ],
-  "names": [],
-  "mappings": "",
-  "sourcesContent": [
-    "// Rails Pulse Icons Bundle - Auto-generated\n// Contains 37 SVG icons for Rails Pulse\n\n(function() {\n  'use strict';\n\n  // Icon data\n  const icons = {\n  \"menu\": \"<path d=\\\"M4 5h16\\\" /><path d=\\\"M4 12h16\\\" /><path d=\\\"M4 19h16\\\" />\",\n  \"sun\": \"<circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"4\\\" /><path d=\\\"M12 2v2\\\" /><path d=\\\"M12 20v2\\\" /><path d=\\\"m4.93 4.93 1.41 1.41\\\" /><path d=\\\"m17.66 17.66 1.41 1.41\\\" /><path d=\\\"M2 12h2\\\" /><path d=\\\"M20 12h2\\\" /><path d=\\\"m6.34 17.66-1.41 1.41\\\" /><path d=\\\"m19.07 4.93-1.41 1.41\\\" />\",\n  \"moon\": \"<path d=\\\"M20.985 12.486a9 9 0 1 1-9.473-9.472c.405-.022.617.46.402.803a6 6 0 0 0 8.268 8.268c.344-.215.825-.004.803.401\\\" />\",\n  \"chevron-right\": \"<path d=\\\"m9 18 6-6-6-6\\\" />\",\n  \"chevron-left\": \"<path d=\\\"m15 18-6-6 6-6\\\" />\",\n  \"chevron-down\": \"<path d=\\\"m6 9 6 6 6-6\\\" />\",\n  \"chevron-up\": \"<path d=\\\"m18 15-6-6-6 6\\\" />\",\n  \"chevrons-left\": \"<path d=\\\"m11 17-5-5 5-5\\\" /><path d=\\\"m18 17-5-5 5-5\\\" />\",\n  \"chevrons-right\": \"<path d=\\\"m6 17 5-5-5-5\\\" /><path d=\\\"m13 17 5-5-5-5\\\" />\",\n  \"loader-circle\": \"<path d=\\\"M12 2v4\\\" /><path d=\\\"m16.2 7.8 2.9-2.9\\\" /><path d=\\\"M18 12h4\\\" /><path d=\\\"m16.2 16.2 2.9 2.9\\\" /><path d=\\\"M12 18v4\\\" /><path d=\\\"m4.9 19.1 2.9-2.9\\\" /><path d=\\\"M2 12h4\\\" /><path d=\\\"m4.9 4.9 2.9 2.9\\\" />\",\n  \"search\": \"<path d=\\\"m21 21-4.34-4.34\\\" /><circle cx=\\\"11\\\" cy=\\\"11\\\" r=\\\"8\\\" />\",\n  \"list-filter\": \"<path d=\\\"M2 5h20\\\" /><path d=\\\"M6 12h12\\\" /><path d=\\\"M9 19h6\\\" />\",\n  \"list-filter-plus\": \"<path d=\\\"M12 5H2\\\" /><path d=\\\"M6 12h12\\\" /><path d=\\\"M9 19h6\\\" /><path d=\\\"M16 5h6\\\" /><path d=\\\"M19 8V2\\\" />\",\n  \"x\": \"<path d=\\\"M18 6 6 18\\\" /><path d=\\\"m6 6 12 12\\\" />\",\n  \"x-circle\": \"<circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"10\\\" /><path d=\\\"m15 9-6 6\\\" /><path d=\\\"m9 9 6 6\\\" />\",\n  \"check\": \"<path d=\\\"M20 6 9 17l-5-5\\\" />\",\n  \"alert-circle\": \"<circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"10\\\" /><line x1=\\\"12\\\" x2=\\\"12\\\" y1=\\\"8\\\" y2=\\\"12\\\" /><line x1=\\\"12\\\" x2=\\\"12.01\\\" y1=\\\"16\\\" y2=\\\"16\\\" />\",\n  \"alert-triangle\": \"<path d=\\\"m21.73 18-8-14a2 2 0 0 0-3.48 0l-8 14A2 2 0 0 0 4 21h16a2 2 0 0 0 1.73-3\\\" /><path d=\\\"M12 9v4\\\" /><path d=\\\"M12 17h.01\\\" />\",\n  \"info\": \"<circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"10\\\" /><path d=\\\"M12 16v-4\\\" /><path d=\\\"M12 8h.01\\\" />\",\n  \"external-link\": \"<path d=\\\"M15 3h6v6\\\" /><path d=\\\"M10 14 21 3\\\" /><path d=\\\"M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6\\\" />\",\n  \"download\": \"<path d=\\\"M12 15V3\\\" /><path d=\\\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\\\" /><path d=\\\"m7 10 5 5 5-5\\\" />\",\n  \"refresh-cw\": \"<path d=\\\"M3 12a9 9 0 0 1 9-9 9.75 9.75 0 0 1 6.74 2.74L21 8\\\" /><path d=\\\"M21 3v5h-5\\\" /><path d=\\\"M21 12a9 9 0 0 1-9 9 9.75 9.75 0 0 1-6.74-2.74L3 16\\\" /><path d=\\\"M8 16H3v5\\\" />\",\n  \"clock\": \"<path d=\\\"M12 6v6l4 2\\\" /><circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"10\\\" />\",\n  \"database\": \"<ellipse cx=\\\"12\\\" cy=\\\"5\\\" rx=\\\"9\\\" ry=\\\"3\\\" /><path d=\\\"M3 5V19A9 3 0 0 0 21 19V5\\\" /><path d=\\\"M3 12A9 3 0 0 0 21 12\\\" />\",\n  \"server\": \"<rect width=\\\"20\\\" height=\\\"8\\\" x=\\\"2\\\" y=\\\"2\\\" rx=\\\"2\\\" ry=\\\"2\\\" /><rect width=\\\"20\\\" height=\\\"8\\\" x=\\\"2\\\" y=\\\"14\\\" rx=\\\"2\\\" ry=\\\"2\\\" /><line x1=\\\"6\\\" x2=\\\"6.01\\\" y1=\\\"6\\\" y2=\\\"6\\\" /><line x1=\\\"6\\\" x2=\\\"6.01\\\" y1=\\\"18\\\" y2=\\\"18\\\" />\",\n  \"activity\": \"<path d=\\\"M22 12h-2.48a2 2 0 0 0-1.93 1.46l-2.35 8.36a.25.25 0 0 1-.48 0L9.24 2.18a.25.25 0 0 0-.48 0l-2.35 8.36A2 2 0 0 1 4.49 12H2\\\" />\",\n  \"layout-dashboard\": \"<rect width=\\\"7\\\" height=\\\"9\\\" x=\\\"3\\\" y=\\\"3\\\" rx=\\\"1\\\" /><rect width=\\\"7\\\" height=\\\"5\\\" x=\\\"14\\\" y=\\\"3\\\" rx=\\\"1\\\" /><rect width=\\\"7\\\" height=\\\"9\\\" x=\\\"14\\\" y=\\\"12\\\" rx=\\\"1\\\" /><rect width=\\\"7\\\" height=\\\"5\\\" x=\\\"3\\\" y=\\\"16\\\" rx=\\\"1\\\" />\",\n  \"audio-lines\": \"<path d=\\\"M2 10v3\\\" /><path d=\\\"M6 6v11\\\" /><path d=\\\"M10 3v18\\\" /><path d=\\\"M14 8v7\\\" /><path d=\\\"M18 5v13\\\" /><path d=\\\"M22 10v3\\\" />\",\n  \"message-circle-question\": \"<path d=\\\"M2.992 16.342a2 2 0 0 1 .094 1.167l-1.065 3.29a1 1 0 0 0 1.236 1.168l3.413-.998a2 2 0 0 1 1.099.092 10 10 0 1 0-4.777-4.719\\\" /><path d=\\\"M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3\\\" /><path d=\\\"M12 17h.01\\\" />\",\n  \"route\": \"<circle cx=\\\"6\\\" cy=\\\"19\\\" r=\\\"3\\\" /><path d=\\\"M9 19h8.5a3.5 3.5 0 0 0 0-7h-11a3.5 3.5 0 0 1 0-7H15\\\" /><circle cx=\\\"18\\\" cy=\\\"5\\\" r=\\\"3\\\" />\",\n  \"trending-up\": \"<path d=\\\"M16 7h6v6\\\" /><path d=\\\"m22 7-8.5 8.5-5-5L2 17\\\" />\",\n  \"trending-down\": \"<path d=\\\"M16 17h6v-6\\\" /><path d=\\\"m22 17-8.5-8.5-5 5L2 7\\\" />\",\n  \"move-right\": \"<path d=\\\"M18 8L22 12L18 16\\\" /><path d=\\\"M2 12H22\\\" />\",\n  \"eye\": \"<path d=\\\"M2.062 12.348a1 1 0 0 1 0-.696 10.75 10.75 0 0 1 19.876 0 1 1 0 0 1 0 .696 10.75 10.75 0 0 1-19.876 0\\\" /><circle cx=\\\"12\\\" cy=\\\"12\\\" r=\\\"3\\\" />\",\n  \"zap\": \"<path d=\\\"M4 14a1 1 0 0 1-.78-1.63l9.9-10.2a.5.5 0 0 1 .86.46l-1.92 6.02A1 1 0 0 0 13 10h7a1 1 0 0 1 .78 1.63l-9.9 10.2a.5.5 0 0 1-.86-.46l1.92-6.02A1 1 0 0 0 11 14z\\\" />\",\n  \"shield-check\": \"<path d=\\\"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z\\\" /><path d=\\\"m9 12 2 2 4-4\\\" />\",\n  \"bell\": \"<path d=\\\"M10.268 21a2 2 0 0 0 3.464 0\\\" /><path d=\\\"M3.262 15.326A1 1 0 0 0 4 17h16a1 1 0 0 0 .74-1.673C19.41 13.956 18 12.499 18 8A6 6 0 0 0 6 8c0 4.499-1.411 5.956-2.738 7.326\\\" />\"\n};\n\n  // Global icon registry\n  window.RailsPulseIcons = {\n    icons: icons,\n\n    // Get icon SVG content\n    get: function(name) {\n      return icons[name] || null;\n    },\n\n    // Check if icon exists\n    has: function(name) {\n      return name in icons;\n    },\n\n    // Get all icon names\n    list: function() {\n      return Object.keys(icons);\n    },\n\n    // Render icon to element (CSP-safe)\n    render: function(name, element, options = {}) {\n      const svgContent = this.get(name);\n      if (!svgContent || !element) return false;\n\n      // Create SVG element\n      const svg = document.createElementNS('http://www.w3.org/2000/svg', 'svg');\n      svg.setAttribute('width', options.width || '24');\n      svg.setAttribute('height', options.height || '24');\n      svg.setAttribute('viewBox', '0 0 24 24');\n      svg.setAttribute('fill', 'none');\n      svg.setAttribute('stroke', 'currentColor');\n      svg.setAttribute('stroke-width', '2');\n      svg.setAttribute('stroke-linecap', 'round');\n      svg.setAttribute('stroke-linejoin', 'round');\n\n      // Add icon content\n      svg.innerHTML = svgContent;\n\n      // Replace element content\n      element.innerHTML = '';\n      element.appendChild(svg);\n\n      return true;\n    }\n  };\n})();\n"
-  ]
-}