radix-firstbanco 2.2.0

data/demo/03_float.md

@@ -0,0 +1,294 @@
+# Radix Float
+
+Radix provides a Float class for working with rational numbers in various bases.
+Actually Radix's implementation of Float is a <i>fixed point</i>, not a 
+*floating point*.
+
+    require 'radix'
+
+    D = Radix::DOT
+
+## Initialization
+
+Radix::Float's initializer can accept either an Integer, Float, String or
+Array as a value and an integer base.
+
+Give a float value, it will automatically be converted to the base
+specified.
+
+    check do |float, base, digits|
+      r = Radix::Float.new(float, base)
+      r.digits.assert == digits
+    end
+
+    ok  8.5,  2, [1,0,0,0,D,1]
+    ok  4.5,  2, [  1,0,0,D,1]
+
+    ok  8.1, 10, [  8,D,1]
+    ok 10.2, 10, [1,0,D,2]
+    #ok  8.1, 16, [  8,D,1]
+    #ok 16.1, 16, [1,0,D,1]
+
+Give an integer value, it will automatically be converted to the base
+specified and given a fraction part set to zero.
+
+    check do |float, base, digits|
+      r = Radix::Float.new(float, base)
+      r.digits.assert == digits
+    end
+
+    ok  8,  2, [1,0,0,0,D,0]
+    ok  4,  2, [  1,0,0,D,0]
+
+    ok  8, 10, [  8,D,0]
+    ok 10, 10, [1,0,D,0]
+    ok  8, 16, [  8,D,0]
+    ok 16, 16, [1,0,D,0]
+
+Given a float, the same will occur.
+
+    ok  8.0,  2, [1,0,0,0,D,0]
+    ok  4.0,  2, [  1,0,0,D,0]
+
+    ok  8.0, 10, [  8,D,0]
+    ok 10.0, 10, [1,0,D,0]
+    ok  8.0, 16, [  8,D,0]
+    ok 16.0, 16, [1,0,D,0]
+
+Where as a String value is taken to already be in the base given.
+
+    ok "1000", 2, [1,0,0,0,D,0]
+    ok  "100", 2, [  1,0,0,D,0]
+
+    ok  "8", 10, [  8,D,0]
+    ok "10", 10, [1,0,D,0]
+    ok  "8", 16, [  8,D,0]
+    ok "10", 16, [1,0,D,0]
+
+    ok "1000.0", 2, [1,0,0,0,D,0]
+    ok  "100.0", 2, [  1,0,0,D,0]
+
+    ok    "8.0", 10, [  8,D,0]
+    ok   "10.0", 10, [1,0,D,0]
+    ok    "8.0", 16, [  8,D,0]
+    ok   "10.0", 16, [1,0,D,0]
+
+And an Array is also taken to be in the base given.
+
+    ok %w[1 0 0 0], 2, [1,0,0,0,D,0]
+    ok %w[  1 0 0], 2, [  1,0,0,D,0]
+
+    ok %w[  8], 10, [  8,D,0]
+    ok %w[1 0], 10, [1,0,D,0]
+    ok %w[  8], 16, [  8,D,0]
+    ok %w[1 0], 16, [1,0,D,0]
+
+Passing in an Array with a fraction part, either the DOT constant can be used,
+which is simply the symbol :'.', or the string '.' can be used.
+
+    ok %w[1 0 0 0 . 0], 2, [1,0,0,0,D,0]
+    ok %w[  1 0 0 . 0], 2, [  1,0,0,D,0]
+
+    ok %w[  8 . 0], 10, [  8,D,0]
+    ok %w[1 0 . 0], 10, [1,0,D,0]
+    ok %w[  8 . 0], 16, [  8,D,0]
+    ok %w[1 0 . 0], 16, [1,0,D,0]
+
+Integers can also be negative, rather than positive. In each case
+just prepend the value with a minus sign.
+
+    check do |float, base, digits|
+      r = Radix::Float.new(float, base)
+      r.digits.assert = digits
+      r.assert.negative?
+    end
+
+    ok(            -8, 2, ['-',1,0,0,0,D,0])
+    ok(       "-1000", 2, ['-',1,0,0,0,D,0])
+    ok( %w[- 1 0 0 0], 2, ['-',1,0,0,0,D,0])
+
+If a value has a digit outside of the range of the base an ArgumentError
+will be raised.
+
+    expect ArgumentError do
+      Radix::Float.new('9', 2)
+    end
+
+Radix provides a convenience extension method to Integer, String and Array
+called #b, to more easily initialize a Radix numeric object. The method simply
+passes the receiver on to `Radix::Integer#new`.
+
+    check do |float, base, digits|
+      r = float.b(base)
+      r.assert.is_a?(Radix::Float)
+      r.digits.assert = digits
+    end
+
+    ok 8.0, 2, [1,0,0,0,D,0]
+    ok 4.0, 2, [  1,0,0,D,0]
+
+    ok "1000.0", 2, [1,0,0,0,D,0]
+    ok  "100.0", 2, [  1,0,0,D,0]
+
+    ok %w"1 0 0 0 . 0", 2, [1,0,0,0,D,0]
+    ok   %w"1 0 0 . 0", 2, [  1,0,0,D,0]
+
+## Conversion
+
+Radix integers can ve converted to other bases with the #convert method.
+
+    b = "1000.0".b(2)
+    d = b.convert(10)
+    d.digits.assert == [8,D,0]
+
+We can convert a Radix::Float to a regular base-10 Float with the #to_f
+method.
+
+    b = "1000.0".b(2)
+    d = b.to_f
+    d.assert == 8.0
+
+We can convert a Radix::Float to a regular base-10 Integer with the #to_i
+method.
+
+    b = "1000.0".b(2)
+    d = b.to_i
+    d.assert == 8
+
+### Equality
+
+Radix extend the Integer, String and Array classes with the #b method
+which simplifies the creation of Radix::Float instances. The following
+return the equivalent instance of Radix::Float.
+
+    a = 8.0.b(2)
+    b = "1000.0".b(2)
+    c = [1,0,0,0,'.',0].b(2)
+
+    a.assert = b
+    b.assert = c
+    c.assert = a
+
+    a.assert = 8.0
+    b.assert = 8.0
+    c.assert = 8.0
+
+More stringent equality can be had from #eql?, in which the other integer
+must be a Radix::Integer too.
+
+    a.assert.eql?(b)
+    a.refute.eql?(8.0)
+
+## Operations
+
+Radix::Float supports all the usual mathematical operators.
+
+### Addition
+
+    check do |a, b, x|
+      (a + b).assert = x
+    end
+
+    ok "1000.0".b(2), "0010.0".b(2), "1010.0".b(2)
+    ok "1000.0".b(2),    "2.0".b(8), "1010.0".b(2)
+    ok "1000.0".b(2),    "2.0".b(8),   "10.0".b(10)
+
+A more complex example.
+
+    x = "AZ42.0".b(62) + "54.0".b(10)
+    x.assert == "2518124.0".b(10)
+    x.assert == 2518124.0
+
+Adding negative integers will, of course, be akin to subtraction.
+
+    ok "1000.0".b(2), "-0010".b(2), "110.0".b(2)
+    ok "1000.0".b(2),    "-2".b(8), "110.0".b(2)
+    ok "1000.0".b(2),    "-2".b(8),   "6.0".b(10)
+
+    ok "-1000.0".b(2), "0010".b(2), "-110.0".b(2)
+    ok "-1000.0".b(2),    "2".b(8), "-110.0".b(2)
+    ok "-1000.0".b(2),    "2".b(8),   "-6.0".b(10)
+
+    ok "-1000.0".b(2), "-0010".b(2), "-1010.0".b(2)
+    ok "-1000.0".b(2),    "-2".b(8), "-1010.0".b(2)
+    ok "-1000.0".b(2),    "-2".b(8),   "-10.0".b(10)
+
+### Subtraction
+
+    check do |a, b, x|
+      (a - b).assert == x
+    end
+
+    ok "1000.0".b(2), "10".b(2), "110.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "110.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "6.0".b(8)
+    ok "1000.0".b(2),  "2".b(8), "6.0".b(10)
+
+A more complex example.
+
+    x = "AZ42.0".b(62) - "54".b(10)
+    x.assert == "2518016.0".b(10)
+    x.assert == 2518016.0
+
+### Multiplication
+
+    check do |a, b, x|
+      (a * b).assert = x
+    end
+
+    ok "1000.0".b(2), "10".b(2), "10000.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "10000.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "20.0".b(8)
+    ok "1000.0".b(2),  "2".b(8), "16.0".b(10)
+
+A more complex example.
+
+    x = "Z42.0".b(62) * "4.0".b(10)
+    x.assert == "539160.0".b(10)
+    x.assert == 539160.0
+
+### Division
+
+    check do |a, b, x|
+      (a / b).assert = x
+    end
+
+    ok "1000.0".b(2), "10".b(2), "100.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "100.0".b(2)
+    ok "1000.0".b(2),  "2".b(8), "4.0".b(8)
+    ok "1000.0".b(2),  "2".b(8), "4.0".b(10)
+
+A more complex example.
+
+    x = "AZ40.0".b(62) / "62.0".b(10)
+    x.assert == "40614.0".b(10)
+    x.assert == 40614.0
+
+### Power
+
+    check do |a, b, x|
+      (a ** b).assert == x
+    end
+
+    ok "1000.0".b(2), "10.0".b(2), 64.0
+
+### Modulo
+
+    check do |a, b, x|
+      (a % b).assert == x
+    end
+
+    ok "1000.0".b(2), "10".b(2), 0
+    ok "1000.0".b(2), "11".b(2), 2
+
+## Coerce
+
+When a Radix::Integer is the operand in an operation against a regular
+Ruby Integer, the calculation should still work via #coerce.
+
+    check do |a, b, x|
+      (a + b).assert == x
+    end
+
+    ok 10.0, "10".b(2), "12".b(10)
+

data/demo/04_rational.md

@@ -0,0 +1,84 @@
+# Radix Rational
+
+    require 'radix'
+
+## Initialization
+
+Radix::Rational's initializer takes a numerator and a denominator,
+either of which can be an Integer, Float, String or Array along witha
+an integer base.
+
+Give a integer value, it will automatically be converted to the base
+specified.
+
+    check do |num, dem, base, eqf|
+      r = Radix::Rational.new(num, dem, base)
+      r.assert == eqf
+    end
+
+    ok  1, 2,  2,  0.5
+    ok  1, 1,  2,  1.0
+
+    ok  8, 1, 10,  8.0
+    ok  8, 5, 10,  1.6
+    ok  8, 8, 10,  1.0
+
+    ok 10, 1, 10, 10.0
+    ok 10, 2, 10,  5.0
+    ok 10, 5, 10,  2.0
+
+    ok  8, 1, 16,  8.0
+    ok 16, 1, 16, 16.0
+
+## Reduction
+
+    check do |a, x|
+      r = a.reduce
+      r.assert == x
+    end
+
+    ok [10,5].br(10),  [2,1].br(10)
+    ok [30,3].br(10), [10,1].br(10)
+
+## Operations
+
+### Addition
+
+    check do |a, b, x|
+      r = a + b
+      r.assert == x
+    end
+
+    ok [8,5].br(10), [1,2].br(10), [21,10].br(10)
+
+    ok [8,5].br(10), 1, [13,5].br(10)
+
+    ok [8,5].br(10), 0.5, [21,10].br(10)
+
+### Subtraction
+
+    check do |a, b, x|
+      r = a - b
+      r.assert == x
+    end
+
+    ok [8,5].br(10), [1,2].br(10), [11,10].br(10)
+
+### Multiplication
+
+    check do |a, b, x|
+      r = a * b
+      r.assert == x
+    end
+
+    ok [8,5].br(10), [1,2].br(10), [8,10].br(10)
+
+### Division
+
+    check do |a, b, x|
+      r = a / b
+      r.assert == x
+    end
+
+    ok [8,5].br(10), [1,2].br(10), [16,5].br(10)
+

data/demo/05_base.md

@@ -0,0 +1,78 @@
+# Radix::Base
+
+The Radix::Base class is an encapsulatin of a numeric base. By creating
+an instance of Base one can convert numbers to and from other bases.
+
+    require 'radix/base'
+
+## Base Instance
+
+First let's try something we all know, converting decimal to hexideciaml.
+To do this we setup the radix base objects for each base.
+
+    b10 = Radix::Base.new(Radix::BASE::B10)
+    b16 = Radix::Base.new(Radix::BASE::B16)
+
+Now we can covert from one base to the other.
+
+    b16.convert("16" , b10).should == "10"
+    b16.convert("160", b10).should == "A0"
+    b16.convert("255", b10).should == "FF"
+
+To confirm, lets convert from hexidecimal back to decimal.
+
+    b10.convert("10", b16).should == "16"
+    b10.convert("A0", b16).should == "160"
+    b10.convert("FF", b16).should == "255"
+
+If we are happy with standard encodings then we can simply provide an
+integer base, rather than a Radix::Base object.
+
+    b10.convert("10", 16).should == "16"
+    b10.convert("A0", 16).should == "160"
+    b10.convert("FF", 16).should == "255"
+
+Now let's try a more down to earth base, my favorite,
+senary, or base six.
+
+    b6  = Radix::Base.new(0..5)
+    b6.convert("39", 10).should == "103"
+
+And the notations need not be in ASCII order. Odd alternate notations
+can be used as well.
+
+    b10 = Radix::Base.new([:Q, :W, :E, :R, :T, :Y, :U, :I, :O, :U])
+    b10.convert("FF", 16) #=> "EYY"
+
+## Encoding and Decoding
+
+Radix::Base instances can also be used to encode and decode strings.
+
+    b16.encode("CHARLIE").should == "434841524C4945"
+    b16.decode("434841524C4945").should == "CHARLIE"
+
+## Module Methods
+
+For further convenience, Radix::base provides functions to convert to and from
+standard notations upto 62 without creating an instance of Radix::Base.
+
+    Radix.convert("10", 16, 10).should == "16"
+    Radix.convert("A0", 16, 10).should == "160"
+    Radix.convert("FF", 16, 10).should == "255"
+
+Let's try that again with the maximum base supported.
+
+    Radix.convert(     "62", 10, 62).should == "10"
+    Radix.convert("8814542", 10, 62).should == "az42"
+
+    Radix.convert(     "10", 62, 10).should == "62"
+    Radix.convert(   "az42", 62, 10).should == "8814542"
+
+Finally, we will demonstrate how to convert bases larger than 62.
+These can only be represented as arrays since there are not enough
+latin characters to represent them.
+
+    Radix.convert_base([100, 10], 256, 10).should == [2, 5, 6, 1, 0]
+    Radix.convert_base([2, 5, 6, 1, 0], 10, 256).should == [100, 10]
+    Radix.convert_base([1, 0, 1, 0, 1], 2, 10).should == [2, 1]
+