pygments.rb 0.6.3 → 1.0.0

data/vendor/pygments-main/tests/examplefiles/example.rpf

@@ -1,4 +0,0 @@
-declare xyz true
-declare s "some string"
-i = 2
-f = 0.2

data/vendor/pygments-main/tests/examplefiles/example.sh

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-printf "%d %s\n" 10 "foo"
-printf "%d %s\n" $((10#1)) "bar"
-
-let "m = 10#${1:1:2}"
-echo $m
-
-m=$((10#${1:4:3} + 10#${1:1:3}))
-echo $m
-
-m=$((10#${1:4:3}))
-echo $m
-
-m=$((10#$1))
-echo $m
-
-m=$((10#1))
-echo $m
-
-m=$((10))
-echo $m

data/vendor/pygments-main/tests/examplefiles/example.sh-session

@@ -1,19 +0,0 @@
-user@host:~/path$ ls -a
-.  ..  a  b  c
-user@host:~/path$ diff -u a b
---- a   2008-07-26 17:10:07.000000000 -0700
-+++ b   2008-07-26 17:10:10.000000000 -0700
-@@ -1,3 +1,3 @@
- a
--b
-+x
- c
-user@host:~/path$ echo \
-> a
-a
-user@host:~/path$ su
-root@host:~#
-sh-3.1$ # on hardy
-sh$ # on etch
-(virtualenv-name)user@host:~$ ls -a
-

data/vendor/pygments-main/tests/examplefiles/example.shell-session

@@ -1,45 +0,0 @@
-[user@linuxbox imx-bootlets-src-10.05.02]$ make CROSS_COMPILE=arm-none-eabi-  clean
-rm -rf *.sb
-rm -f sd_mmc_bootstream.raw
-rm -f linux_prep/board/*.o
-...
-Files:
-rm -f power_prep.o eabi.o
-Build output:
-make[1]: Leaving directory `/home/...'
-[user@linuxbox imx-bootlets-src-10.05.02]$ make CROSS_COMPILE=arm-none-eabi-
-make[1]: Entering directory `/home/...'
-...
-#@echo "generating U-Boot boot stream image"
-#elftosb2 -z -c ./uboot_prebuilt.db -o imx23_uboot.sb
-echo "generating kernel bootstream file sd_mmc_bootstream.raw"
-generating kernel bootstream file sd_mmc_bootstream.raw
-#Please use cfimager to burn xxx_linux.sb. The below way will no
-#work at imx28 platform.
-> test
-$ test
-rm -f sd_mmc_bootstream.raw
-[user@linuxbox imx-bootlets-src-10.05.02]$
-pi@raspberrypi ~ $ sudo sh -c "echo 17 > /sys/class/gpio/export"
-pi@raspberrypi ~ $ sudo sh -c "echo out > /sys/class/gpio/gpio17/direction"
-pi@raspberrypi ~ $ sudo sh -c "echo 1 > /sys/class/gpio/gpio17/value"
-pi@raspberrypi ~ $ sudo sh -c "echo 0 > /sys/class/gpio/gpio17/value"
-pi@raspberrypi ~ $
-[user@linuxbox ~]$ # copy other stuff to the SD card
-root@imx233-olinuxino-micro:~# lsmod
-  Not tainted
-[user@linuxbox ~]$ tail -n 2 /mnt/rpi/etc/inittab
-#Spawn a getty on Raspberry Pi serial line
-T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
-pi@raspberrypi:~/Adafruit-WebIDE$ mkdir tmp
-pi@raspberrypi:~/Adafruit-WebIDE$ npm config set tmp tmp
-pi@raspberrypi:~/Adafruit-WebIDE$ npm install
-pi@raspberrypi ~/Adafruit-WebIDE $ ifconfig eth0
-eth0      Link encap:Ethernet  HWaddr b5:33:ff:33:ee:aq
-          inet addr:10.42.0.60  Bcast:10.42.0.255  Mask:255.255.255.0
-          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
-          RX packets:21867 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:8684 errors:0 dropped:0 overruns:0 carrier:0
-          collisions:0 txqueuelen:1000
-          RX bytes:27338495 (26.0 MiB)  TX bytes:1268356 (1.2 MiB)
-

data/vendor/pygments-main/tests/examplefiles/example.slim

@@ -1,31 +0,0 @@
-doctype html
-html
-  head
-    title Slim Examples
-    meta name="keywords" content="template language"
-    meta name="author" content=author
-    javascript:
-      alert('Slim supports embedded javascript!')
-
-  body
-    h1 Markup examples
-
-    #content
-      p This example shows you how a basic Slim file looks like.
-
-      == yield
-
-      - unless items.empty?
-        table
-          - for item in items do
-            tr
-              td.name = item.name
-              td.price = item.price
-      - else
-        p
-          | No items found. Please add some inventory.
-            Thank you!
-
-    div id="footer"
-      = render 'footer'
-      | Copyright (C) #{year} #{author}

data/vendor/pygments-main/tests/examplefiles/example.sls

@@ -1,51 +0,0 @@
-include:
-  - moosefs
-
-{% for mnt in salt['cmd.run']('ls /dev/data/moose*').split() %}
-/mnt/moose{{ mnt[-1] }}:
-  mount.mounted:
-    - device: {{ mnt }}
-    - fstype: xfs
-    - mkmnt: True
-  file.directory:
-    - user: mfs
-    - group: mfs
-    - require:
-      - user: mfs
-      - group: mfs
-{% endfor %}
-
-/etc/mfshdd.cfg:
-  file.managed:
-    - source: salt://moosefs/mfshdd.cfg
-    - user: root
-    - group: root
-    - mode: 644
-    - template: jinja
-    - require:
-      - pkg: mfs-chunkserver
-
-/etc/mfschunkserver.cfg:
-  file.managed:
-    - source: salt://moosefs/mfschunkserver.cfg
-    - user: root
-    - group: root
-    - mode: 644
-    - template: jinja
-    - require:
-      - pkg: mfs-chunkserver
-
-mfs-chunkserver:
-  pkg:
-    - installed
-mfschunkserver:
-  service:
-    - running
-    - require:
-{% for mnt in salt['cmd.run']('ls /dev/data/moose*') %}
-      - mount: /mnt/moose{{ mnt[-1] }}
-      - file: /mnt/moose{{ mnt[-1] }}
-{% endfor %}
-      - file: /etc/mfschunkserver.cfg
-      - file: /etc/mfshdd.cfg
-      - file: /var/lib/mfs

data/vendor/pygments-main/tests/examplefiles/example.sml

@@ -1,156 +0,0 @@
-structure C = struct
-   val a = 12
-   fun f x = x + 5
-end
-
-(*(*(*(*(* This file is all pretty strange Standard ML *)*)*)*) (**)*)
-(* Robert J. Simmons *)
-
-(* Comments (* can be nested *) *)
-structure S = struct
-  val x = (1, 2, "three")
-end
-
-structure Sv = struct
-  (* These look good *)
-  val x = (1, 2, "three")
-  val z = #2 x
-
-  (* Although these look bad (not all the numbers are constants),       *
-   * they never occur in practice, as they are equivalent to the above. *)
-  val x = {1 = 1, 3 = "three", 2 = 2}
-  val z = #
-            2 x
-
-  val || = 12
-end
-
-signature S = sig end
-
-structure S = struct
-  val x = (1, 2, "three")
-  datatype 'a t = T of 'a
-       and u = U of v * v
-  withtype v = {left: int t, right: int t}
-  exception E1 of int and E2
-  fun 'a id (x: 'a) : 'a = x
-
-  val 
-      'a id = fn (x : 'a) => x
-end
-
-signature R = sig
-  type t
-  val x : t
-  val f : t * int -> int
-end
-structure R : R = struct
-  datatype t = T of int
-  val x : t = T 0
-  fun f (T x, i : int) : int = x + i
-  fun 'a id (x: 'a) : 'a = x
-end
-
-signature BA_Z = sig 
-   val s: int
-   include S R
-end 
-
-structure b______ = struct (* What (* A * strange * name *) for ) a ( struct *)
-
-val !%&$#+-/:<=>?@\~`^|* = 3
-
-type struct' = int list
-and 'a sig' = 'a list
-and ('a, 'b) end' = 'b option * 'a list
-
-structure baz = struct
-  structure Bar = struct 
-    val foo = !%&$#+-/:<=>?@\~`^|*
-  end  
-end
-
-infixr +!+ 
-fun (a +!+ b) = (op +) (a, b)
-
-open baz S R
-
-val$$$ = fn x => fn y => fn z => fn w => w
-val (foo, ++, bar, ||) = (4, baz.Bar.foo, !%&$#+-/:<=>?@\~`^|*, Bar.foo)
-val _ = $$$foo++bar||
-
-val val'ue : ' list = []
-val struct3 : (' -> ') = fn x => x
-val end_struct_' : ('a -> 'a) = fn x => x
-val x : (''a -> ''a) = fn x => x
-val x : ('''' -> '''') = fn x => x
-val x : unit = print "Weird, huh?\n"
-val w = {x=1,y=2,##= =3,4=3}
-val {##=, x, 4=a,...} = w
-val z = #4 w
-val z = # ##= w
-
-fun f x y 0 = 4 
-  | f x y z = 4 + Sv.||
-
-exception Foo of int
-datatype ('0, 'b, '_, ') f'o'o = Bar | baZ12' | dsfa_fad | #@$ | Bug
-and (', ''', '''', ''''') bar = 
-   Bee of unit
- | Ben of (', ''', '''', ''''') f'o'o * int
- | X of ''' list
-
-fun q x = raise Foo x
-and h x = raise Foo (~x)
-
-val x = 4
-and y = 5
-
-fun q 0 = 4
-  | q 1 = (case 1 of 1 => 2 | 3 => 4 | x => y)
-  | q y = case y of 1 => 2 | 3 => 4 | x => y
-
-val x = ref true
-fun q 0 = 4
-  | q 1 = if false then case 1 of 1 => 2 | 3 => 4 | x => y else 19
-  | q 2 = (while !x handle Match => !x | Fail _ => !x do () ; 2)
-  | q x = (raise Match) handle Domain => 9 | Match => 3
-
-fun p 0 = 12
-  | p 1 = 8
-  | p 2 = r false
-  | p x = r true
-and r true = 19
-  | r false = 12
-
-val _ = 123
-val _ = 0001
-val _ = ~123
-val _ = ~0001
-val _ = 0w12412
-val _ = 0w12412
-val _ = 0xfA0
-val _ = ~0xfA0
-val _ = 0wxfA0
-val _ = 1.4
-val _ = ~1.4
-val _ = 1e~2
-val _ = 1E~2
-val _ = 1e2
-val _ = 1E2
-val _ = 1.4e~2
-val _ = 1.4E~2
-val _ = 1.4e2
-val _ = 1.4E2
-
-val c = #"\000"
-val st = "foo \
- 	 \ bar" ^ "baz \        
-  	 \ and \ 
-   	 \ such\n"
-
-val () = print st
-
-val _ = foo::bar::4::[++]
-
-end

data/vendor/pygments-main/tests/examplefiles/example.snobol

@@ -1,15 +0,0 @@
--SOME RANDOM DIRECTIVE WOULD GO HERE
-*
-* SNOBOL4 example file for lexer
-*
- SOME.THING_OR_OTHER32 = 1 + 1.0 - 1E3 * 1E-3 ** 2.718284590E0
-+ :F(END)S(IN_LOOP) 
- PATTERN = LEN(3) ("GAR" | "BAR")
-IN_LOOP THING = INPUT :F(END)
- THING LEN(3) ("GAR" | "BAR") :S(OK)
- OUTPUT = THING " : Failure!" :(IN_LOOP)
-OK OUTPUT = THING ' : "Success"!' :(IN_LOOP)
-END
-FOOBAR
-FOOGAR
-THiNIg

data/vendor/pygments-main/tests/examplefiles/example.stan

@@ -1,110 +0,0 @@
-/* 
-A file for testing Stan syntax highlighting. 
-
-It is not a real model and will not compile
-*/
-# also a comment
-// also a comment
-data {
-  // valid name
-  int abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_abc;
-  // all types should be highlighed
-  int a3;
-  real foo[2];
-  vector[3] bar;
-  row_vector[3] baz;
-  matrix[3,3] qux;
-  simplex[3] quux;
-  ordered[3] corge;
-  positive_ordered[3] wibble;
-  corr_matrix[3] grault;
-  cov_matrix[3] garply;
-  cholesky_factor_cov[3] waldo;
-  
-  real<lower=-1,upper=1> foo1;
-  real<lower=0> foo2;
-  real<upper=0> foo3;
-}
-transformed data {
-  real xyzzy;
-  int thud;
-  row_vector grault2;
-  matrix qux2;
-  
-  // all floating point literals should be recognized
-  // all operators should be recognized
-  // paren should be recognized;
-  xyzzy <- 1234.5687 + .123 - (2.7e3 / 2E-5 * 135e-5);
-  // integer literal
-  thud <- -12309865;
-  // ./ and .* should be recognized as operators
-  grault2 <- grault .* garply ./ garply;
-  // ' and \ should be regognized as operators
-  qux2 <- qux' \ bar;
-  
-}
-parameters {
-  real fred;
-  real plugh;
-}
-transformed parameters {    
-}
-model {
-  // ~, <- are operators, 
-  // T may be be recognized
-  // normal is a function
-  fred ~ normal(0, 1) T(-0.5, 0.5);
-  real tmp;
-  // C++ reserved
-  real public;
-  
-  // control structures
-  for (i in 1:10) {
-    tmp <- tmp + 0.1;
-  }
-  tmp <- 0.0;
-  while (tmp < 5.0) {
-    tmp <- tmp + 1;
-  }
-  if (tmp > 0.0) {
-    print(tmp);
-  } else {
-    print(tmp);
-  }
-
-  // operators
-  tmp || tmp;
-  tmp && tmp;
-  tmp == tmp;
-  tmp != tmp;   
-  tmp < tmp;
-  tmp <= tmp;
-  tmp > tmp;
-  tmp >= tmp;
-  tmp + tmp;
-  tmp - tmp;
-  tmp * tmp;
-  tmp / tmp;
-  tmp .* tmp;
-  tmp ./ tmp;
-  ! tmp;
-  - tmp;
-  + tmp;
-  tmp ';
-
-  // lp__ should be highlighted
-  // normal_log as a function
-  lp__ <- lp__ + normal_log(plugh, 0, 1);
-  increment_log_prob(normal_log(plugh, 0, 1));
-  
-  // print statement and string literal
-  print("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_~@#$%^&*`'-+={}[].,;: ");
-  print("Hello, world!");
-  print("");
-  
-}
-generated quantities {
-  real bar1;
-  bar1 <- foo + 1;
-}
-