puppet 6.11.1-x64-mingw32 → 6.16.0-x64-mingw32

data/COMMITTERS.md

@@ -1,244 +0,0 @@
-Committing changes to Puppet
-====
-
-We would like to make it easier for community members to contribute to Puppet
-using pull requests, even if it makes the task of reviewing and committing
-these changes a little harder.  Pull requests are only ever based on a single
-branch, however, we maintain more than one active branch.  As a result
-contributors should target their changes at the master branch. This makes the
-process of contributing a little easier for the contributor since they don't
-need to concern themselves with the question, "What branch do I base my changes
-on?"  This is already called out in the [CONTRIBUTING.md](https://goo.gl/XRH2J).
-
-Therefore, it is the responsibility of the committer to re-base the change set
-on the appropriate branch which should receive the contribution.
-
-It is also the responsibility of the committer to review the change set in an
-effort to make sure the end users must opt-in to new behavior that is
-incompatible with previous behavior.  We employ the use of [feature
-flags](https://stackoverflow.com/questions/7707383/what-is-a-feature-flag) as
-the primary way to achieve this user opt-in behavior.  Finally, it is the
-responsibility of the committer to make sure the `master` and `stable` branches
-are both clean and working at all times.  Clean means that dead code is not
-allowed, everything needs to be usable in some manner at all points in time.
-Stable is not an indication of the build status, but rather an expression of
-our intent that the `stable` branch does not receive new functionality.
-
-The rest of this document addresses the concerns of the committer.  This
-document will help guide the committer decide which branch to base, or re-base
-a contribution on top of.  This document also describes our branch management
-strategy, which is closely related to the decision of what branch to commit
-changes into.
-
-Terminology
-====
-
-Many of these terms have more than one meaning.  For the purposes of this
-document, the following terms refer to specific things.
-
-**contributor** - A person who makes a change to Puppet and submits a change
-set in the form of a pull request.
-
-**change set** - A set of discrete patches which combined together form a
-contribution.  A change set takes the form of Git commits and is submitted to
-Puppet in the form of a pull request.
-
-**committer** - A person responsible for reviewing a pull request and then
-making the decision what base branch to merge the change set into.
-
-**base branch** - A branch in Git that contains an active history of changes
-and will eventually be released using semantic version guidelines.  The branch
-named `master` will always exist as a base branch.  The other base branches are
-`stable`, and `security` described below.
-
-**master branch** - The branch where new functionality that are not bug fixes
-is merged.
-
-**stable branch** - The branch where bug fixes against the latest release or
-release candidate are merged.
-
-**security** - Where critical security fixes are merged.  These change sets
-will then be merged into release branches independently from one another. (i.e.
-no merging up).  Please do not submit pull requests against the security branch
-and instead report all security related issues to security@puppetlabs.com as
-per our security policy published at
-[https://puppetlabs.com/security/](https://puppetlabs.com/security/).
-
-Committer Guide
-====
-
-This section provides a guide to follow while committing change sets to Puppet
-base branches.
-
-How to decide what release(s) should be patched
----
-
-This section provides a guide to help a committer decide the specific base
-branch that a change set should be merged into.
-
-The latest minor release of a major release is the only base branch that should
-be patched.  These patches will be merged into `master` if they contain new
-functionality.  They will be merged into `stable` and `master` if they fix a
-critical bug.  Older minor releases in a major release do not get patched.
-
-Before the switch to [semantic versions](http://semver.org/) committers did not
-have to think about the difference between minor and major releases.
-Committing to the latest minor release of a major release is a policy intended
-to limit the number of active base branches that must be managed.
-
-Security patches are handled as a special case.  Security patches may be
-applied to earlier minor releases of a major release, but the patches should
-first be merged into the `security` branch.  Security patches should be merged
-by Puppet Labs staff members.  Pull requests should not be submitted with the
-security branch as the base branch.  Please send all security related
-information or patches to security@puppetlabs.com as per our [Security
-Policy](https://puppetlabs.com/security/).
-
-The CI systems are configured to run against `master` and `stable`.  Over time,
-these branches will refer to different versions, but their name will remain
-fixed to avoid having to update CI jobs and tasks as new versions are released.
-
-How to commit a change set to multiple base branches
----
-
-A change set may apply to multiple branches, for example a bug fix should be
-applied to the stable release and the development branch.  In this situation
-the change set needs to be committed to multiple base branches.  This section
-provides a guide for how to merge patches into these branches, e.g.
-`stable` is patched, how should the changes be applied to `master`?
-
-First, rebase the change set onto the `stable` branch.  Next, merge the change
-set into the `stable` branch using a merge commit.  Once merged into `stable`,
-merge the same change set into `master` without doing a rebase as to preserve
-the commit identifiers.  This merge strategy follows the [git
-flow](http://nvie.com/posts/a-successful-git-branching-model/) model.  Both of
-these change set merges should have a merge commit which makes it much easier
-to track a set of commits as a logical change set through the history of a
-branch.  Merge commits should be created using the `--no-ff --log` git merge
-options.
-
-Any merge conflicts should be resolved using the merge commit in order to
-preserve the commit identifiers for each individual change.  This ensures `git
-branch --contains` will accurately report all of the base branches which
-contain a specific patch.
-
-Using this strategy, the stable branch need not be reset.  Both `master` and
-`stable` have infinite lifetimes.  Patch versions, also known as bug fix
-releases, will be tagged and released directly from the `stable` branch.  Major
-and minor versions, also known as feature releases, will be tagged and released
-directly from the `master` branch.  Upon release of a new major or minor
-version all of the changes in the `master` branch will be merged into the
-`stable` branch.
-
-Code review checklist
----
-
-This section aims to provide a checklist of things to look for when reviewing a
-pull request and determining if the change set should be merged into a base
-branch:
-
- * All tests pass
- * Are there any platform gotchas? (Does a change make an assumption about
-   platform specific behavior that is incompatible with other platforms?  e.g.
-   Windows paths vs. POSIX paths.)
- * Is the change backwards compatible? (It should be)
- * Are there YARD docs for API changes?
- * Does the change set also require documentation changes? If so is the
-   documentation being kept up to date?
- * Does the change set include clean code?  (software code that is formatted
-   correctly and in an organized manner so that another coder can easily read
-   or modify it.)  HINT: `git diff master --check`
- * Does the change set conform to the contributing guide?
-
-Commit citizen guidelines:
----
-
-This section aims to provide guidelines for being a good commit citizen by
-paying attention to our automated build tools.
-
- * Don’t push on a broken build.  (A broken build is defined as a failing job
-   in the [Puppet FOSS](https://jenkins.puppetlabs.com/view/Puppet%20FOSS/)
-   page.)
- * Watch the build until your changes have gone through green
- * Update the ticket status and target version.  The target version field in
-   our issue tracker should be updated to be the next release of Puppet.  For
-   example, if the most recent release of Puppet is 3.1.1 and you merge a
-   backwards compatible change set into master, then the target version should
-   be 3.2.0 in the issue tracker.)
- * Ensure the pull request is closed (Hint: amend your merge commit to contain
-   the string `closes #123` where 123 is the pull request number and github
-   will automatically close the pull request when the branch is pushed.)
-
-Example Procedure
-====
-
-This section helps a committer rebase a contribution onto an earlier base
-branch, then merge into the base branch and up through all active base
-branches.
-
-Suppose a contributor submits a pull request based on master.  The change set
-fixes a bug reported against Puppet 3.1.1 which is the most recently released
-version of Puppet.
-
-In this example the committer should rebase the change set onto the `stable`
-branch since this is a bug rather than new functionality.
-
-First, the committer pulls down the branch using the `hub` gem.  This tool
-automates the process of adding the remote repository and creating a local
-branch to track the remote branch.
-
-    $ hub checkout https://github.com/puppetlabs/puppet/pull/1234
-    Branch jeffmccune-fix_foo_error set up to track remote branch fix_foo_error from jeffmccune.
-    Switched to a new branch 'jeffmccune-fix_foo_error'
-
-At this point the topic branch is a descendant of master, but we want it to
-descend from `stable`.  The committer rebases the change set onto `stable`.
-
-    $ git branch bug/stable/fix_foo_error
-    $ git rebase --onto stable master bug/stable/fix_foo_error
-    First, rewinding head to replay your work on top of it...
-    Applying: (#23456) Fix FooError that always bites users in 3.1.1
-
-The `git rebase` command may be interpreted as, "First, check out the branch
-named `bug/stable/fix_foo_error`, then take the changes that were previously
-based on `master` and re-base them onto `stable`.
-
-Now that we have a topic branch containing the change set based on the `stable`
-release branch, the committer merges in:
-
-    $ git checkout stable
-    Switched to branch 'stable'
-    $ git merge --no-ff --log bug/stable/fix_foo_error
-    Merge made by the 'recursive' strategy.
-     foo | 0
-     1 file changed, 0 insertions(+), 0 deletions(-)
-     create mode 100644 foo
-
-Once merged into the first base branch, the committer merges the `stable`
-branch into `master`, being careful to preserve the same commit identifiers.
-
-    $ git checkout master
-    Switched to branch 'master'
-    $ git merge --no-ff --log stable
-    Merge made by the 'recursive' strategy.
-     foo | 0
-     1 file changed, 0 insertions(+), 0 deletions(-)
-     create mode 100644 foo
-
-Once the change set has been merged into one base branch, the change set should
-not be modified in order to keep the history clean, avoid "double" commits, and
-preserve the usefulness of `git branch --contains`.  If there are any merge
-conflicts, they are to be resolved in the merge commit itself and not by
-re-writing (rebasing) the patches for one base branch, but not another.
-
-Once the change set has been merged into `stable` and into `master`, the
-committer pushes.  Please note, the checklist should be complete at this point.
-It's helpful to make sure your local branches are up to date to avoid one of
-the branches failing to fast forward while the other succeeds.  Both the
-`stable` and `master` branches are being pushed at the same time.
-
-    $ git push puppetlabs master:master stable:stable
-
-That's it!  The committer then updates the pull request, updates the issue in
-our issue tracker, and keeps an eye on the [build
-status](http://jenkins.puppetlabs.com).

data/spec/integration/faces/plugin_spec.rb

@@ -1,61 +0,0 @@
-require 'spec_helper'
-require 'puppet/face'
-require 'puppet/file_serving/metadata'
-require 'puppet/file_serving/content'
-require 'puppet/indirector/memory'
-require 'puppet/indirector/file_metadata'
-require 'puppet/indirector/file_content'
-
-module PuppetFaceIntegrationSpecs
-describe "Puppet plugin face" do
-  INDIRECTORS = [
-    Puppet::Indirector::FileMetadata,
-    Puppet::Indirector::FileContent,
-  ]
-
-  INDIRECTED_CLASSES = [
-    Puppet::FileServing::Metadata,
-    Puppet::FileServing::Content,
-    Puppet::Node::Facts,
-  ]
-
-  INDIRECTORS.each do |indirector|
-    class indirector::Memory < Puppet::Indirector::Memory
-      def find(request)
-        model.new('/dev/null', { 'type' => 'directory' })
-      end
-    end
-  end
-
-  before do
-    FileUtils.mkdir(File.join(Puppet[:vardir], 'lib'))
-    FileUtils.mkdir(File.join(Puppet[:vardir], 'facts.d'))
-    FileUtils.mkdir(File.join(Puppet[:vardir], 'locales'))
-    @termini_classes = {}
-    INDIRECTED_CLASSES.each do |indirected|
-      @termini_classes[indirected] = indirected.indirection.terminus_class
-      indirected.indirection.terminus_class = :memory
-    end
-  end
-
-  after do
-    INDIRECTED_CLASSES.each do |indirected|
-      indirected.indirection.terminus_class = @termini_classes[indirected]
-      indirected.indirection.termini.clear
-    end
-  end
-
-  def init_cli_args_and_apply_app(args = ["download"])
-    Puppet::Application.find(:plugin).new(double('command_line', :subcommand_name => :plugin, :args => args))
-  end
-
-  it "processes a download request" do
-    app = init_cli_args_and_apply_app
-    expect do
-      expect {
-        app.run
-      }.to exit_with(0)
-    end.to have_printed(/No plugins downloaded/)
-  end
-end
-end

data/spec/lib/puppet_spec/validators.rb

@@ -1,37 +0,0 @@
-class ConstantErrorValidator
-  def initialize(args)
-    @fails_with = args[:fails_with]
-    @error_string = args[:error_string] || ""
-    @peer_certs = args[:peer_certs] || []
-  end
-
-  def setup_connection(connection)
-    connection.stubs(:start).raises(OpenSSL::SSL::SSLError.new(@fails_with))
-  end
-
-  def peer_certs
-    @peer_certs
-  end
-
-  def verify_errors
-    [@error_string]
-  end
-end
-
-class NoProblemsValidator
-  def initialize(cert)
-    @cert = cert
-  end
-
-  def setup_connection(connection)
-  end
-
-  def peer_certs
-    [@cert]
-  end
-
-  def verify_errors
-    []
-  end
-end
-