puppet 6.11.1-x64-mingw32 → 6.16.0-x64-mingw32

data/man/man5/puppet.conf.5

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPETCONF" "5" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPETCONF" "5" "May 2020" "Puppet, Inc." "Puppet manual"
 \fBThis page is autogenerated; any changes will get overwritten\fR
 .
 .SH "Configuration settings"
@@ -97,7 +97,7 @@ If a custom policy executable is configured, the CA puppet master will run it ev
 If a certificate request is not autosigned, it will persist for review\. An admin user can use the \fBpuppetserver ca sign\fR command to manually sign it, or can delete the request\.
 .
 .P
-For info on autosign configuration files, see the guide to Puppet\'s config files \fIhttps://puppet\.com/docs/puppet/latest/config_about_settings\.html\fR\.
+For info on autosign configuration files, see the guide to Puppet\'s config files \fIhttps://puppet\.com/docs/puppet/latest/config_file_autosign\.html\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/autosign\.conf
@@ -392,7 +392,7 @@ If present, this file must be a YAML hash containing a \fBcustom_attributes\fR k
 Custom attributes can be used by the CA when deciding whether to sign the certificate, but are then discarded\. Attribute OIDs can be any OID value except the standard CSR attributes (i\.e\. attributes described in RFC 2985 section 5\.4)\. This is useful for embedding a pre\-shared key for autosigning policy executables (see the \fBautosign\fR setting), often by using the \fB1\.2\.840\.113549\.1\.9\.7\fR ("challenge password") OID\.
 .
 .P
-Extension requests will be permanently embedded in the final certificate\. Extension OIDs must be in the "ppRegCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.1\fR) or "ppPrivCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.2\fR) OID arcs\. The ppRegCertExt arc is reserved for four of the most common pieces of data to embed: \fBpp_uuid\fR (\fB\.1\fR), \fBpp_instance_id\fR (\fB\.2\fR), \fBpp_image_name\fR (\fB\.3\fR), and \fBpp_preshared_key\fR (\fB\.4\fR) \-\-\- in the YAML file, these can be referred to by their short descriptive names instead of their full OID\. The ppPrivCertExt arc is unregulated, and can be used for site\-specific extensions\.
+Extension requests will be permanently embedded in the final certificate\. Extension OIDs must be in the "ppRegCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.1\fR), "ppPrivCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.2\fR), or "ppAuthCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.3\fR) OID arcs\. The ppRegCertExt arc is reserved for four of the most common pieces of data to embed: \fBpp_uuid\fR (\fB\.1\fR), \fBpp_instance_id\fR (\fB\.2\fR), \fBpp_image_name\fR (\fB\.3\fR), and \fBpp_preshared_key\fR (\fB\.4\fR) \-\-\- in the YAML file, these can be referred to by their short descriptive names instead of their full OID\. The ppPrivCertExt arc is unregulated, and can be used for site\-specific extensions\. The ppAuthCert arc is reserved for two pieces of data to embed: \fBpp_authorization\fR (\fB\.1\fR) and \fBpp_auth_role\fR (\fB\.13\fR)\. As with ppRegCertExt, in the YAML file, these can be referred to by their short descriptive name instead of their full OID\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/csr_attributes\.yaml
@@ -673,6 +673,14 @@ For more info, see the ENC documentation \fIhttps://puppet\.com/docs/puppet/late
 .
 .IP "" 0
 .
+.SS "facterng"
+Whether to enable a pre\-Facter 4\.0 release of Facter (distributed as the "facter\-ng" gem)\. This is not necessary if Facter 3\.x or later is installed\. This setting is still experimental\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "factpath"
 Where Puppet should look for facts\. Multiple directories should be separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
@@ -849,6 +857,14 @@ Whether to write HTTP request and responses to stderr\. This should never be use
 .
 .IP "" 0
 .
+.SS "http_extra_headers"
+The list of extra headers that will be sent with http requests to the master\. The header definition consists of a name and a value separated by a colon\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: []
+.
+.IP "" 0
+.
 .SS "http_keepalive_timeout"
 The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed\. This timeout should be shorter than the keepalive timeout used on the HTTP server, e\.g\. Apache KeepAliveTimeout directive\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
@@ -904,7 +920,7 @@ The time to wait for data to be read from an HTTP connection\. If nothing is rea
 The HTTP User\-Agent string to send when making network requests\.
 .
 .IP "\(bu" 4
-\fIDefault\fR: Puppet/6\.11\.0 Ruby/2\.4\.1\-p111 (x86_64\-linux)
+\fIDefault\fR: Puppet/6\.16\.0 Ruby/2\.4\.1\-p111 (x86_64\-linux)
 .
 .IP "" 0
 .
@@ -1182,6 +1198,28 @@ The maximum amount of time the Puppet agent should wait for its certificate requ
 .
 .IP "" 0
 .
+.SS "maxwaitforlock"
+The maximum amount of time the puppet agent should wait for an already running puppet agent to finish before starting a new one\. This is set by default to 1 minute\. A value of \fBunlimited\fR will cause puppet agent to wait indefinitely\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: 1m
+.
+.IP "" 0
+.
+.SS "merge_dependency_warnings"
+Whether to merge class\-level dependency failure warnings\.
+.
+.P
+When a class has a failed dependency, every resource in the class generates a notice level message about the dependency failure, and a warning level message about skipping the resource\.
+.
+.P
+If true, all messages caused by a class dependency failure are merged into one message associated with the class\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "mkusers"
 Whether to create the necessary user and group that puppet agent will run as\.
 .
@@ -1250,7 +1288,10 @@ How to store cached nodes\. Valid values are (none), \'json\', \'msgpack\', or \
 
 .
 .SS "node_name"
-How the puppet master determines the client\'s identity and sets the \'hostname\', \'fqdn\' and \'domain\' facts for use in the manifest, in particular for determining which \'node\' statement applies to the client\. Possible values are \'cert\' (use the subject\'s CN in the client\'s certificate) and \'facter\' (use the hostname that the client reported in its facts)
+How the puppet master determines the client\'s identity and sets the \'hostname\', \'fqdn\' and \'domain\' facts for use in the manifest, in particular for determining which \'node\' statement applies to the client\. Possible values are \'cert\' (use the subject\'s CN in the client\'s certificate) and \'facter\' (use the hostname that the client reported in its facts)\.
+.
+.P
+This setting is deprecated, please use explicit fact matching for classification\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: cert
@@ -1452,6 +1493,14 @@ The public key directory\.
 .
 .IP "" 0
 .
+.SS "puppet_trace"
+Whether to print the Puppet stack trace on some errors\. This is a noop if \fBtrace\fR is also set\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "puppetdlog"
 The fallback log file\. This is only used when the \fB\-\-logdest\fR option is not specified AND Puppet is running on an operating system where both the POSIX syslog service and the Windows Event Log are unavailable\. (Currently, no supported operating systems match that description\.)
 .
@@ -1474,6 +1523,14 @@ Whether to send reports after every transaction\.
 .
 .IP "" 0
 .
+.SS "report_include_system_store"
+Whether the \'http\' report processor should include the system certificate store when submitting reports to HTTPS URLs\. If false, then the \'http\' processor will only trust HTTPS report servers whose certificates are issued by the puppet CA or one of its intermediate CAs\. If true, the processor will additionally trust CA certificates in the system\'s certificate store\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "report_port"
 The port to communicate with the report_server\.
 .
@@ -1545,7 +1602,7 @@ The configuration file that defines the rights to the different rest indirection
 .IP "" 0
 .
 .SS "resubmit_facts"
-Whether to send updated facts after every transaction\.
+Whether to send updated facts after every transaction\. By default puppet only submits facts at the beginning of the transaction before applying a catalog\. Since puppet can modify the state of the system, the value of the facts may change after puppet finishes\. Therefore, any facts stored in puppetdb may not be consistent until the agent next runs, typically in 30 minutes\. If this feature is enabled, puppet will resubmit facts after applying its catalog, ensuring facts for the node stored in puppetdb are current\. However, this will double the fact submission load on puppetdb, so it is disabled by default\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
@@ -1826,10 +1883,13 @@ Whether the agent specified environment should be considered authoritative, caus
 .IP "" 0
 .
 .SS "strict_hostname_checking"
-Whether to only search for the complete hostname as it is in the certificate when searching for node information in the catalogs\.
+Whether to only search for the complete hostname as it is in the certificate when searching for node information in the catalogs or to match dot delimited segments of the cert\'s certname and the hostname, fqdn, and/or domain facts\.
+.
+.P
+This setting is deprecated and will be removed in a future release\.
 .
 .IP "\(bu" 4
-\fIDefault\fR: false
+\fIDefault\fR: true
 .
 .IP "" 0
 .
@@ -1877,7 +1937,7 @@ Turns on experimental support for tasks and plans in the puppet language\. This
 .IP "" 0
 .
 .SS "trace"
-Whether to print stack traces on some errors
+Whether to print stack traces on some errors\. Will print internal Ruby stack trace interleaved with Puppet function frames\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
@@ -1965,6 +2025,14 @@ The directory containing \fBvendored\fR modules\. These modules will be used by
 .
 .IP "" 0
 .
+.SS "versioned_environment_dirs"
+Whether or not to look for versioned environment directories, symlinked from \fB$environmentpath/<environment>\fR\. This is an experimental feature and should be used with caution\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "waitforcert"
 How frequently puppet agent should ask for a signed certificate\.
 .
@@ -1979,6 +2047,17 @@ Puppet agent cannot apply configurations until its approved certificate is avail
 .
 .IP "" 0
 .
+.SS "waitforlock"
+How frequently puppet agent should try running when there is an already ongoing puppet agent instance\.
+.
+.P
+This argument is by default disabled (value set to 0)\. In this case puppet agent will immediatly exit if it cannot run at that moment\. When a value other than 0 is set, this can also be used in combination with the \fBmaxwaitforlock\fR argument\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: 0
+.
+.IP "" 0
+.
 .SS "yamldir"
 The directory in which YAML data is stored, usually in a subdirectory\.
 .

data/man/man8/puppet-agent.8

@@ -1,13 +1,13 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-AGENT" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-AGENT" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-agent\fR \- The puppet agent daemon
 .
 .SH "SYNOPSIS"
-Retrieves the client configuration from the puppet master and applies it to the local host\.
+Retrieves the client configuration from the Puppet master and applies it to the local host\.
 .
 .P
 This service may be run as a daemon, run periodically using cron (or something similar), or run interactively for testing purposes\.
@@ -57,7 +57,7 @@ Some flags are meant specifically for interactive use \-\-\- in particular, \'te
 \'\-\-skip_tags\' is a flag used to filter resources\. If this is set, then only resources not tagged with the specified tags will be applied\. Values must be comma\-separated\.
 .
 .SH "OPTIONS"
-Note that any Puppet setting that\'s valid in the configuration file is also a valid long argument\. For example, \'server\' is a valid setting, so you can specify \'\-\-server \fIservername\fR\' as an argument\. Boolean settings translate into \'\-\-setting\' and \'\-\-no\-setting\' pairs\.
+Note that any Puppet setting that\'s valid in the configuration file is also a valid long argument\. For example, \'server\' is a valid setting, so you can specify \'\-\-server \fIservername\fR\' as an argument\. Boolean settings accept a \'\-\-no\-\' prefix to turn off a behavior, translating into \'\-\-setting\' and \'\-\-no\-setting\' pairs, such as \fB\-\-daemonize\fR and \fB\-\-no\-daemonize\fR\.
 .
 .P
 See the configuration file documentation at https://puppet\.com/docs/puppet/latest/configuration\.html for the full list of acceptable settings\. A commented list of all settings can also be generated by running puppet agent with \'\-\-genconfig\'\.
@@ -108,7 +108,7 @@ Disable can also take an optional message that will be reported by the \'puppet
 \'puppet agent\' exits after executing this\.
 .
 .IP "\(bu" 4
-\-\-enable: Enable working on the local system\. This removes any lock file, causing \'puppet agent\' to start managing the local system again (although it will continue to use its normal scheduling, so it might not start for another half hour)\.
+\-\-enable: Enable working on the local system\. This removes any lock file, causing \'puppet agent\' to start managing the local system again However, it continues to use its normal scheduling, so it might not start for another half hour\.
 .
 .IP
 \'puppet agent\' exits after executing this\.
@@ -138,7 +138,7 @@ A path ending with \'\.jsonl\' will receive structured output in JSON Lines form
 \-\-masterport: The port on which to contact the puppet master\. (This is a Puppet setting, and can go in puppet\.conf\.)
 .
 .IP "\(bu" 4
-\-\-noop: Use \'noop\' mode where the daemon runs in a no\-op or dry\-run mode\. This is useful for seeing what changes Puppet will make without actually executing the changes\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
+\-\-noop: Use \'noop\' mode where the daemon runs in a no\-op or dry\-run mode\. This is useful for seeing what changes Puppet would make without actually executing the changes\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
 .
 .IP "\(bu" 4
 \-\-onetime: Run the configuration once\. Runs a single (normally daemonized) Puppet run\. Useful for interactively running puppet agent when used in conjunction with the \-\-no\-daemonize option\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
@@ -159,7 +159,7 @@ A path ending with \'\.jsonl\' will receive structured output in JSON Lines form
 \-\-version: Print the puppet version number and exit\.
 .
 .IP "\(bu" 4
-\-\-waitforcert: This option only matters for daemons that do not yet have certificates and it is enabled by default, with a value of 120 (seconds)\. This causes \'puppet agent\' to connect to the server every 2 minutes and ask it to sign a certificate request\. This is useful for the initial setup of a puppet client\. You can turn off waiting for certificates by specifying a time of 0\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
+\-\-waitforcert: This option only matters for daemons that do not yet have certificates and it is enabled by default, with a value of 120 (seconds)\. This causes \'puppet agent\' to connect to the server every 2 minutes and ask it to sign a certificate request\. This is useful for the initial setup of a puppet client\. You can turn off waiting for certificates by specifying a time of 0\. (This is a Puppet setting, and can go in puppet\.conf\.)
 .
 .IP "" 0
 .

data/man/man8/puppet-apply.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-APPLY" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-APPLY" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-apply\fR \- Apply Puppet manifests locally

data/man/man8/puppet-catalog.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-CATALOG" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-CATALOG" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-catalog\fR \- Compile, save, view, and convert catalogs\.

data/man/man8/puppet-config.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-CONFIG" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-CONFIG" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-config\fR \- Interact with Puppet\'s settings\.

data/man/man8/puppet-describe.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DESCRIBE" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DESCRIBE" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-describe\fR \- Display help about resource types

data/man/man8/puppet-device.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DEVICE" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DEVICE" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-device\fR \- Manage remote network devices
@@ -90,7 +90,7 @@ Displays the facts of a remote target\. Target must be specified\.
 .
 .TP
 \-\-resource
-Displays a resource state as Puppet code, roughly equivalent to \fBpuppet resource\fR\. Can be filterd by title\. Requires \-\-target be specified\.
+Displays a resource state as Puppet code, roughly equivalent to \fBpuppet resource\fR\. Can be filtered by title\. Requires \-\-target be specified\.
 .
 .TP
 \-\-target

data/man/man8/puppet-doc.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DOC" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DOC" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-doc\fR \- Generate Puppet references

data/man/man8/puppet-epp.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-EPP" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-EPP" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-epp\fR \- Interact directly with the EPP template parser/renderer\.

data/man/man8/puppet-facts.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-FACTS" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-FACTS" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-facts\fR \- Retrieve and store facts\.

data/man/man8/puppet-filebucket.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-FILEBUCKET" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-FILEBUCKET" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-filebucket\fR \- Store and retrieve files in a filebucket
@@ -36,6 +36,21 @@ This is a stand\-alone filebucket client for sending files to a local or central
 .P
 Note that \'filebucket\' defaults to using a network\-based filebucket available on the server named \'puppet\'\. To use this, you\'ll have to be running as a user with valid Puppet certificates\. Alternatively, you can use your local file bucket by specifying \'\-\-local\', or by specifying \'\-\-bucket\' with a local path\.
 .
+.IP "" 4
+.
+.nf
+
+  find /opt/puppetlabs/server/data/puppetserver/bucket \-type f \-mtime +45 \-atime +45 \-print0 | xargs \-0 rm
+.
+.fi
+.
+.IP "" 0
+.
+.IP "\(bu" 4
+Restrict the directory to a maximum size after which the oldest items are removed\.
+.
+.IP "" 0
+.
 .SH "OPTIONS"
 Note that any setting that\'s valid in the configuration file is also a valid long argument\. For example, \'ssldir\' is a valid setting, so you can specify \'\-\-ssldir \fIdirectory\fR\' as an argument\.
 .
@@ -68,7 +83,7 @@ Use a remote filebucket\. This uses the default configuration information and th
 .
 .TP
 \-\-server_list
-A list of comma seperated servers; only the first entry is used for file storage\. This setting takes precidence over \fBserver\fR\.
+A list of comma separated servers; only the first entry is used for file storage\. This setting takes precidence over \fBserver\fR\.
 .
 .TP
 \-\-server

data/man/man8/puppet-generate.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-GENERATE" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-GENERATE" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-generate\fR \- Generates Puppet code from Ruby definitions\.

data/man/man8/puppet-help.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-HELP" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-HELP" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-help\fR \- Display Puppet help\.
@@ -34,7 +34,7 @@ Whether to log debug information\.
 \fBSYNOPSIS\fR
 .
 .IP
-puppet help [\-\-version VERSION] [\fIsubcommand\fR] [\fIaction\fR]
+puppet help [\-\-version VERSION] [\-\-ronn] [\fIsubcommand\fR] [\fIaction\fR]
 .
 .IP
 \fBDESCRIPTION\fR
@@ -43,7 +43,10 @@ puppet help [\-\-version VERSION] [\fIsubcommand\fR] [\fIaction\fR]
 Display help about Puppet subcommands and their actions\.
 .
 .IP
-\fBOPTIONS\fR \fI\-\-version VERSION\fR \- The version of the subcommand for which to show help\.
+\fBOPTIONS\fR \fI\-\-ronn\fR \- Whether to render the help text in ronn format\.
+.
+.IP
+\fI\-\-version VERSION\fR \- The version of the subcommand for which to show help\.
 .
 .IP
 \fBRETURNS\fR

data/man/man8/puppet-key.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-KEY" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-KEY" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-key\fR \- Create, save, and remove certificate keys\.

data/man/man8/puppet-lookup.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "LOOKUP" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "LOOKUP" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBlookup\fR \- Interactive Hiera lookup

data/man/man8/puppet-man.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-MAN" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-MAN" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-man\fR \- Display Puppet manual pages\.

data/man/man8/puppet-module.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-MODULE" "8" "November 2019" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-MODULE" "8" "May 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-module\fR \- Creates, installs and searches for modules on the Puppet Forge\.
@@ -170,6 +170,9 @@ puppet module search \fIsearch_term\fR
 \fBDESCRIPTION\fR
 .
 .IP
+This action has been deprecated\. Please use the Puppet Forge to search for modules\.
+.
+.IP
 Searches a repository for modules whose names, descriptions, or keywords match the provided search term\.
 .
 .IP