puppet 5.5.22 → 6.0.0

data/spec/unit/util/network_device/cisco/device_spec.rb

@@ -1,491 +0,0 @@
-require 'spec_helper'
-
-require 'puppet/util/network_device/cisco/device'
-require 'puppet/util/network_device/transport/telnet'
-
-if Puppet.features.telnet?
-  describe Puppet::Util::NetworkDevice::Cisco::Device do
-    before(:each) do
-      @transport = double(
-        'transport',
-        :is_a? => true,
-        :command => "",
-        :host= => nil,
-        :port= => nil,
-        :user= => nil,
-        :password= => nil,
-        :default_prompt= => nil,
-        :handles_login? => nil,
-        :connect => nil,
-        :close => nil,
-      )
-      @cisco = Puppet::Util::NetworkDevice::Cisco::Device.new("telnet://user:password@localhost:23/")
-      @cisco.transport = @transport
-    end
-
-    describe "when creating the device" do
-      it "should find the enable password from the url" do
-        cisco = Puppet::Util::NetworkDevice::Cisco::Device.new("telnet://user:password@localhost:23/?enable=enable_password")
-        expect(cisco.enable_password).to eq("enable_password")
-      end
-
-      describe "decoding the enable password" do
-        it "should not parse a password if no query is given" do
-          cisco = described_class.new("telnet://user:password@localhost:23")
-          expect(cisco.enable_password).to be_nil
-        end
-
-        it "should not parse a password if no enable param is given" do
-          cisco = described_class.new("telnet://user:password@localhost:23/?notenable=notapassword")
-          expect(cisco.enable_password).to be_nil
-        end
-        it "should decode sharps" do
-          cisco = described_class.new("telnet://user:password@localhost:23/?enable=enable_password%23with_a_sharp")
-          expect(cisco.enable_password).to eq("enable_password#with_a_sharp")
-        end
-
-        it "should decode spaces" do
-          cisco = described_class.new("telnet://user:password@localhost:23/?enable=enable_password%20with_a_space")
-          expect(cisco.enable_password).to eq("enable_password with_a_space")
-        end
-
-        it "should only use the query parameter" do
-          cisco = described_class.new("telnet://enable=:password@localhost:23/?enable=enable_password&notenable=notapassword")
-          expect(cisco.enable_password).to eq("enable_password")
-        end
-      end
-
-      it "should find the enable password from the options" do
-        cisco = Puppet::Util::NetworkDevice::Cisco::Device.new("telnet://user:password@localhost:23/?enable=enable_password", :enable_password => "mypass")
-        expect(cisco.enable_password).to eq("mypass")
-      end
-
-      it "should find the debug mode from the options" do
-        expect(Puppet::Util::NetworkDevice::Transport::Telnet).to receive(:new).with(true).and_return(@transport)
-        Puppet::Util::NetworkDevice::Cisco::Device.new("telnet://user:password@localhost:23", :debug => true)
-      end
-
-      it "should set the debug mode to nil by default" do
-        expect(Puppet::Util::NetworkDevice::Transport::Telnet).to receive(:new).with(nil).and_return(@transport)
-        Puppet::Util::NetworkDevice::Cisco::Device.new("telnet://user:password@localhost:23")
-      end
-    end
-
-    describe "when connecting to the physical device" do
-      it "should connect to the transport" do
-        expect(@transport).to receive(:connect)
-        @cisco.command
-      end
-
-      it "should attempt to login" do
-        expect(@cisco).to receive(:login)
-        @cisco.command
-      end
-
-      it "should tell the device to not page" do
-        expect(@transport).to receive(:command).with("terminal length 0")
-        @cisco.command
-      end
-
-      it "should enter the enable password if returned prompt is not privileged" do
-        allow(@transport).to receive(:command).and_return("")
-        allow(@transport).to receive(:command).with("terminal length 0").and_yield("Switch>").and_return("")
-        expect(@cisco).to receive(:enable)
-        @cisco.command
-      end
-
-      it "should find device capabilities" do
-        expect(@cisco).to receive(:find_capabilities)
-        @cisco.command
-      end
-
-      it "should execute given command" do
-        expect(@transport).to receive(:command).with("mycommand")
-        @cisco.command("mycommand")
-      end
-
-      it "should yield to the command block if one is provided" do
-        expect(@transport).to receive(:command).with("mycommand")
-        @cisco.command do |c|
-          c.command("mycommand")
-        end
-      end
-
-      it "should close the device transport" do
-        expect(@transport).to receive(:close)
-        @cisco.command
-      end
-
-      describe "when login in" do
-        it "should not login if transport handles login" do
-          expect(@transport).to receive(:handles_login?).and_return(true)
-          expect(@transport).not_to receive(:command)
-          expect(@transport).not_to receive(:expect)
-          @cisco.login
-        end
-
-        it "should send username if one has been provided" do
-          expect(@transport).to receive(:command).with("user", :prompt => /^Password:/)
-          @cisco.login
-        end
-
-        it "should send password after the username" do
-          expect(@transport).to receive(:command).with("user", :prompt => /^Password:/)
-          expect(@transport).to receive(:command).with("password")
-          @cisco.login
-        end
-
-        it "should expect the Password: prompt if no user was sent" do
-          @cisco.url.user = ''
-          expect(@transport).to receive(:expect).with(/^Password:/)
-          expect(@transport).to receive(:command).with("password")
-          @cisco.login
-        end
-      end
-
-      describe "when entering enable password" do
-        it "should raise an error if no enable password has been set" do
-          @cisco.enable_password = nil
-          expect{ @cisco.enable }.to raise_error(RuntimeError, /Can't issue "enable" to enter privileged/)
-        end
-
-        it "should send the enable command and expect an enable prompt" do
-          @cisco.enable_password = 'mypass'
-          expect(@transport).to receive(:command).with("enable", :prompt => /^Password:/)
-          @cisco.enable
-        end
-
-        it "should send the enable password" do
-          @cisco.enable_password = 'mypass'
-          allow(@transport).to receive(:command).with("enable", :prompt => /^Password:/)
-          expect(@transport).to receive(:command).with("mypass")
-          @cisco.enable
-        end
-      end
-    end
-
-    describe "when finding network device capabilities" do
-      it "should try to execute sh vlan brief" do
-        expect(@transport).to receive(:command).with("sh vlan brief").and_return("")
-        @cisco.find_capabilities
-      end
-
-      it "should detect errors" do
-        allow(@transport).to receive(:command).with("sh vlan brief").and_return(<<eos)
-Switch#sh vlan brief  
-% Ambiguous command:  "sh vlan brief"
-Switch#
-eos
-
-        @cisco.find_capabilities
-        expect(@cisco).not_to be_support_vlan_brief
-      end
-    end
-
-    {
-      "Fa 0/1" => "FastEthernet0/1",
-      "Fa0/1" => "FastEthernet0/1",
-      "FastEth 0/1" => "FastEthernet0/1",
-      "Gi1" => "GigabitEthernet1",
-      "Te2" => "TenGigabitEthernet2",
-      "Di9" => "Dialer9",
-      "Ethernet 0/0/1" => "Ethernet0/0/1",
-      "E0" => "Ethernet0",
-      "ATM 0/1.1" => "ATM0/1.1",
-      "VLAN99" => "VLAN99"
-    }.each do |input,expected|
-      it "should canonicalize #{input} to #{expected}" do
-        expect(@cisco.canonicalize_ifname(input)).to eq(expected)
-      end
-    end
-
-    describe "when updating device vlans" do
-      describe "when removing a vlan" do
-        it "should issue the no vlan command" do
-          expect(@transport).to receive(:command).with("no vlan 200")
-          @cisco.update_vlan("200", {:ensure => :present, :name => "200"}, { :ensure=> :absent})
-        end
-      end
-
-      describe "when updating a vlan" do
-        it "should issue the vlan command to enter global vlan modifications" do
-          expect(@transport).to receive(:command).with("vlan 200")
-          @cisco.update_vlan("200", {:ensure => :present, :name => "200"}, { :ensure=> :present, :name => "200"})
-        end
-
-        it "should issue the name command to modify the vlan description" do
-          expect(@transport).to receive(:command).with("name myvlan")
-          @cisco.update_vlan("200", {:ensure => :present, :name => "200"}, { :ensure=> :present, :name => "200", :description => "myvlan"})
-        end
-      end
-    end
-
-    describe "when parsing interface" do
-      it "should parse interface output" do
-        expect(@cisco).to receive(:parse_interface).and_return({ :ensure => :present })
-
-        expect(@cisco.interface("FastEthernet0/1")).to eq({ :ensure => :present })
-      end
-
-      it "should parse trunking and merge results" do
-        allow(@cisco).to receive(:parse_interface).and_return({ :ensure => :present })
-        expect(@cisco).to receive(:parse_trunking).and_return({ :native_vlan => "100" })
-
-        expect(@cisco.interface("FastEthernet0/1")).to eq({ :ensure => :present, :native_vlan => "100" })
-      end
-
-      it "should return an absent interface if parse_interface returns nothing" do
-        allow(@cisco).to receive(:parse_interface).and_return({})
-
-        expect(@cisco.interface("FastEthernet0/1")).to eq({ :ensure => :absent })
-      end
-
-      it "should parse ip address information and merge results" do
-        allow(@cisco).to receive(:parse_interface).and_return({ :ensure => :present })
-        expect(@cisco).to receive(:parse_interface_config).and_return({ :ipaddress => [24,IPAddr.new('192.168.0.24'), nil] })
-
-        expect(@cisco.interface("FastEthernet0/1")).to eq({ :ensure => :present, :ipaddress => [24,IPAddr.new('192.168.0.24'), nil] })
-      end
-
-      it "should parse the sh interface command" do
-        allow(@transport).to receive(:command).with("sh interface FastEthernet0/1").and_return(<<eos)
-Switch#sh interfaces FastEthernet 0/1
-FastEthernet0/1 is down, line protocol is down 
-  Hardware is Fast Ethernet, address is 00d0.bbe2.19c1 (bia 00d0.bbe2.19c1)
-  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, 
-     reliability 255/255, txload 1/255, rxload 1/255
-  Encapsulation ARPA, loopback not set
-  Keepalive not set
-  Auto-duplex , Auto Speed , 100BaseTX/FX
-  ARP type: ARPA, ARP Timeout 04:00:00
-  Last input never, output 5d04h, output hang never
-  Last clearing of "show interface" counters never
-  Queueing strategy: fifo
-  Output queue 0/40, 0 drops; input queue 0/75, 0 drops
-  5 minute input rate 0 bits/sec, 0 packets/sec
-  5 minute output rate 0 bits/sec, 0 packets/sec
-     580 packets input, 54861 bytes
-     Received 6 broadcasts, 0 runts, 0 giants, 0 throttles
-     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
-     0 watchdog, 1 multicast
-     0 input packets with dribble condition detected
-     845 packets output, 80359 bytes, 0 underruns
-     0 output errors, 0 collisions, 1 interface resets
-     0 babbles, 0 late collision, 0 deferred
-     0 lost carrier, 0 no carrier
-     0 output buffer failures, 0 output buffers swapped out
-Switch#
-eos
-
-        expect(@cisco.parse_interface("FastEthernet0/1")).to eq({ :ensure => :absent, :duplex => :auto, :speed => :auto })
-      end
-
-      it "should be able to parse the sh vlan brief command output" do
-        allow(@cisco).to receive(:support_vlan_brief?).and_return(true)
-        allow(@transport).to receive(:command).with("sh vlan brief").and_return(<<eos)
-Switch#sh vlan brief
-VLAN Name                             Status    Ports
----- -------------------------------- --------- -------------------------------
-1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6,
-                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10,
-                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14,
-                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18,
-                                                Fa0/23, Fa0/24
-10   VLAN0010                         active    
-100  management                       active    Fa0/1, Fa0/2
-Switch#
-eos
-
-        expect(@cisco.parse_vlans).to eq({"100"=>{:status=>"active", :interfaces=>["FastEthernet0/1", "FastEthernet0/2"], :description=>"management", :name=>"100"}, "1"=>{:status=>"active", :interfaces=>["FastEthernet0/3", "FastEthernet0/4", "FastEthernet0/5", "FastEthernet0/6", "FastEthernet0/7", "FastEthernet0/8", "FastEthernet0/9", "FastEthernet0/10", "FastEthernet0/11", "FastEthernet0/12", "FastEthernet0/13", "FastEthernet0/14", "FastEthernet0/15", "FastEthernet0/16", "FastEthernet0/17", "FastEthernet0/18", "FastEthernet0/23", "FastEthernet0/24"], :description=>"default", :name=>"1"}, "10"=>{:status=>"active", :interfaces=>[], :description=>"VLAN0010", :name=>"10"}})
-      end
-
-      it "should parse trunk switchport information" do
-        allow(@transport).to receive(:command).with("sh interface FastEthernet0/21 switchport").and_return(<<eos)
-Switch#sh interfaces FastEthernet 0/21 switchport
-Name: Fa0/21
-Switchport: Enabled
-Administrative mode: trunk
-Operational Mode: trunk
-Administrative Trunking Encapsulation: dot1q
-Operational Trunking Encapsulation: dot1q
-Negotiation of Trunking: Disabled
-Access Mode VLAN: 0 ((Inactive))
-Trunking Native Mode VLAN: 1 (default)
-Trunking VLANs Enabled: ALL
-Trunking VLANs Active: 1,10,100
-Pruning VLANs Enabled: 2-1001
-
-Priority for untagged frames: 0
-Override vlan tag priority: FALSE
-Voice VLAN: none
-Appliance trust: none
-Self Loopback: No
-Switch#
-eos
-
-        expect(@cisco.parse_trunking("FastEthernet0/21")).to eq({ :mode => :trunk, :encapsulation => :dot1q, :native_vlan => "1", :allowed_trunk_vlans=>:all, })
-      end
-
-      it "should parse dynamic desirable switchport information with native and allowed vlans" do
-        allow(@transport).to receive(:command).with("sh interface GigabitEthernet 0/1 switchport").and_return(<<eos)
-c2960#sh interfaces GigabitEthernet 0/1 switchport 
-Name: Gi0/1
-Switchport: Enabled
-Administrative Mode: dynamic desirable
-Operational Mode: trunk
-Administrative Trunking Encapsulation: dot1q
-Operational Trunking Encapsulation: dot1q
-Negotiation of Trunking: On
-Access Mode VLAN: 100 (SHDSL)
-Trunking Native Mode VLAN: 1 (default)
-Administrative Native VLAN tagging: enabled
-Voice VLAN: none
-Administrative private-vlan host-association: none 
-Administrative private-vlan mapping: none 
-Administrative private-vlan trunk native VLAN: none
-Administrative private-vlan trunk Native VLAN tagging: enabled
-Administrative private-vlan trunk encapsulation: dot1q
-Administrative private-vlan trunk normal VLANs: none
-Administrative private-vlan trunk associations: none
-Administrative private-vlan trunk mappings: none
-Operational private-vlan: none
-Trunking VLANs Enabled: 1,99
-Pruning VLANs Enabled: 2-1001
-Capture Mode Disabled
-Capture VLANs Allowed: ALL
-
-Protected: false
-Unknown unicast blocked: disabled
-Unknown multicast blocked: disabled
-Appliance trust: none
-c2960#
-eos
-
-        expect(@cisco.parse_trunking("GigabitEthernet 0/1")).to eq({ :mode => "dynamic desirable", :encapsulation => :dot1q, :access_vlan => "100", :native_vlan => "1", :allowed_trunk_vlans=>"1,99", })
-      end
-
-      it "should parse access switchport information" do
-        allow(@transport).to receive(:command).with("sh interface FastEthernet0/1 switchport").and_return(<<eos)
-Switch#sh interfaces FastEthernet 0/1 switchport  
-Name: Fa0/1
-Switchport: Enabled
-Administrative mode: static access
-Operational Mode: static access
-Administrative Trunking Encapsulation: isl
-Operational Trunking Encapsulation: isl
-Negotiation of Trunking: Disabled
-Access Mode VLAN: 100 (SHDSL)
-Trunking Native Mode VLAN: 1 (default)
-Trunking VLANs Enabled: NONE
-Pruning VLANs Enabled: NONE
-
-Priority for untagged frames: 0
-Override vlan tag priority: FALSE
-Voice VLAN: none
-Appliance trust: none
-Self Loopback: No
-Switch#
-eos
-
-        expect(@cisco.parse_trunking("FastEthernet0/1")).to eq({ :mode => :access, :access_vlan => "100", :native_vlan => "1" })
-      end
-
-      it "should parse auto/negotiate switchport information" do
-        allow(@transport).to receive(:command).with("sh interface FastEthernet0/24 switchport").and_return(<<eos)
-Switch#sh interfaces FastEthernet 0/24 switchport
-Name: Fa0/24
-Switchport: Enabled
-Administrative mode: dynamic auto
-Operational Mode: static access
-Administrative Trunking Encapsulation: negotiate
-Operational Trunking Encapsulation: native
-Negotiation of Trunking: On
-Access Mode VLAN: 1 (default)
-Trunking Native Mode VLAN: 2 (default)
-Administrative Native VLAN tagging: enabled
-Voice VLAN: none
-Administrative private-vlan host-association: none
-Administrative private-vlan mapping: none
-Administrative private-vlan trunk native VLAN: none
-Administrative private-vlan trunk Native VLAN tagging: enabled
-Administrative private-vlan trunk encapsulation: dot1q
-Administrative private-vlan trunk normal VLANs: none
-Administrative private-vlan trunk private VLANs: none
-Operational private-vlan: none
-Trunking VLANs Enabled: ALL
-Pruning VLANs Enabled: 2-1001
-Capture Mode Disabled
-Capture VLANs Allowed: ALL
-
-Protected: false
-Unknown unicast blocked: disabled
-Unknown multicast blocked: disabled
-Appliance trust: none
-eos
-
-        expect(@cisco.parse_trunking("FastEthernet0/24")).to eq({ :mode => "dynamic auto", :encapsulation => :negotiate, :allowed_trunk_vlans => :all, :access_vlan => "1", :native_vlan => "2" })
-      end
-
-      it "should parse ip addresses" do
-        allow(@transport).to receive(:command).with("sh running-config interface Vlan 1 | begin interface").and_return(<<eos)
-router#sh running-config interface Vlan 1 | begin interface
-interface Vlan1
- description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$FW_INSIDE$
- ip address 192.168.0.24 255.255.255.0 secondary
- ip address 192.168.0.1 255.255.255.0
- ip access-group 100 in
- no ip redirects
- no ip proxy-arp
- ip nbar protocol-discovery
- ip dns view-group dow
- ip nat inside
- ip virtual-reassembly
- ip route-cache flow
- ipv6 address 2001:7A8:71C1::/64 eui-64
- ipv6 enable
- ipv6 traffic-filter DENY-ACL6 out
- ipv6 mtu 1280
- ipv6 nd prefix 2001:7A8:71C1::/64
- ipv6 nd ra interval 60
- ipv6 nd ra lifetime 180
- ipv6 verify unicast reverse-path
- ipv6 inspect STD6 out
-end
-
-router#
-eos
-        expect(@cisco.parse_interface_config("Vlan 1")).to eq({:ipaddress=>[[24, IPAddr.new('192.168.0.24'), 'secondary'],
-                                                                        [24, IPAddr.new('192.168.0.1'), nil],
-                                                                        [64, IPAddr.new('2001:07a8:71c1::'), "eui-64"]]})
-      end
-
-      it "should parse etherchannel membership" do
-        allow(@transport).to receive(:command).with("sh running-config interface Gi0/17 | begin interface").and_return(<<eos)
-c2960#sh running-config interface Gi0/17 | begin interface
-interface GigabitEthernet0/17
- description member of Po1
- switchport mode access
- channel-protocol lacp
- channel-group 1 mode passive
- spanning-tree portfast
- spanning-tree bpduguard enable
-end
-
-c2960#
-eos
-        expect(@cisco.parse_interface_config("Gi0/17")).to eq({:etherchannel=>"1"})
-      end
-    end
-
-    describe "when finding device facts" do
-      it "should delegate to the cisco facts entity" do
-        facts = double('facts')
-        expect(Puppet::Util::NetworkDevice::Cisco::Facts).to receive(:new).and_return(facts)
-
-        expect(facts).to receive(:retrieve).and_return(:facts)
-
-        expect(@cisco.facts).to eq(:facts)
-      end
-    end
-  end
-end