printful_client 1.0.1

data/lib/printful_client/models/address.rb

@@ -0,0 +1,336 @@
+=begin
+#API Documentation | Printful
+
+## About the Printful API  The Printful API is a RESTful API, that uses an HTTP protocol for communication. HTTP GET, POST, PUT and DELETE methods are used to access the API resources.  ## Requests and responses  ### Request endpoint All API requests have to be sent to this URL: ``` https://api.printful.com/ ``` If you are using a proxy, make sure that all requests have host header set to **api.printful.com**.  ### Request parameters Some mandatory parameters (like object identifiers) must be included in the request URL path ``` GET /orders/123 ``` Additional parameters can be passed as GET variables: ``` GET /orders?offset=10&limit=5 ``` For POST and PUT requests, a more complex data structure can be passed as JSON encoded data in the request body: ``` POST /orders  {\"recipient\":{...},\"items\":[...]} ```  ### Response body The response body is always a JSON object that contains a response status code (identical to the HTTP status code) and the result of the action. If the status code is 200, then the action was successful. ``` {    \"code\": 200, //Response status code    \"result\":{       //API method return data    //...    } } ```  Sometimes the response includes paging information to allow to browse larger result sets by adding offset and limit GET parameters to the request URL. ``` {    \"code\": 200, //Response status code    \"result\":[     {        //Item 11     },     {        //Item 12     }    ]    \"paging\": {       \"total\": 12,  //Total items available       \"offset\": 10, //Items skipped from the beginning       \"limit\": 20   //Number of items per page    } } ```  ## Error response If the API call is not successful, then the response code is not in the 2xx range and the `result` attribute contains an error description. ``` {     \"code\": 404,     \"result\": \"Not Found\",     \"error\": {         \"reason\": \"NotFound\",         \"message\": \"Not Found\"     } } ```  In general, response codes in the 4xx range indicate an error that resulted from the provided information (e.g. a required parameter was missing, etc.), and codes in the 5xx range indicate an error with Printful's servers.  ### Timestamps All timestamps from the API are returned as integers in UNIX timestamp format.  ### Rate Limits Printful API has a general rate limit of 120 API calls per minute. Additionally, endpoints that perform resource intensive operations (such as mockup generator) have a lower allowed request limit.  # Authentication  <!-- ReDoc-Inject: <security-definitions> -->
+
+The version of the OpenAPI document: 1.0
+Contact: devsupport@printful.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 7.0.0-SNAPSHOT
+
+=end
+
+require 'date'
+require 'time'
+
+module Printful
+  # Information about the address
+  class Address
+    # Full name
+    attr_accessor :name
+
+    # Company name
+    attr_accessor :company
+
+    # Address line 1
+    attr_accessor :address1
+
+    # Address line 2
+    attr_accessor :address2
+
+    # City
+    attr_accessor :city
+
+    # State code
+    attr_accessor :state_code
+
+    # State name
+    attr_accessor :state_name
+
+    # Country code
+    attr_accessor :country_code
+
+    # Country name
+    attr_accessor :country_name
+
+    # ZIP/Postal code
+    attr_accessor :zip
+
+    # Phone number
+    attr_accessor :phone
+
+    # Email address
+    attr_accessor :email
+
+    # TAX number (`optional`, but in case of Brazil country this field becomes `required` and will be used as CPF/CNPJ number)<br> CPF format is 000.000.000-00 (14 characters);<br> CNPJ format is 00.000.000/0000-00 (18 characters).
+    attr_accessor :tax_number
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'name' => :'name',
+        :'company' => :'company',
+        :'address1' => :'address1',
+        :'address2' => :'address2',
+        :'city' => :'city',
+        :'state_code' => :'state_code',
+        :'state_name' => :'state_name',
+        :'country_code' => :'country_code',
+        :'country_name' => :'country_name',
+        :'zip' => :'zip',
+        :'phone' => :'phone',
+        :'email' => :'email',
+        :'tax_number' => :'tax_number'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'name' => :'String',
+        :'company' => :'String',
+        :'address1' => :'String',
+        :'address2' => :'String',
+        :'city' => :'String',
+        :'state_code' => :'String',
+        :'state_name' => :'String',
+        :'country_code' => :'String',
+        :'country_name' => :'String',
+        :'zip' => :'String',
+        :'phone' => :'String',
+        :'email' => :'String',
+        :'tax_number' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Printful::Address` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Printful::Address`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'name')
+        self.name = attributes[:'name']
+      end
+
+      if attributes.key?(:'company')
+        self.company = attributes[:'company']
+      end
+
+      if attributes.key?(:'address1')
+        self.address1 = attributes[:'address1']
+      end
+
+      if attributes.key?(:'address2')
+        self.address2 = attributes[:'address2']
+      end
+
+      if attributes.key?(:'city')
+        self.city = attributes[:'city']
+      end
+
+      if attributes.key?(:'state_code')
+        self.state_code = attributes[:'state_code']
+      end
+
+      if attributes.key?(:'state_name')
+        self.state_name = attributes[:'state_name']
+      end
+
+      if attributes.key?(:'country_code')
+        self.country_code = attributes[:'country_code']
+      end
+
+      if attributes.key?(:'country_name')
+        self.country_name = attributes[:'country_name']
+      end
+
+      if attributes.key?(:'zip')
+        self.zip = attributes[:'zip']
+      end
+
+      if attributes.key?(:'phone')
+        self.phone = attributes[:'phone']
+      end
+
+      if attributes.key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.key?(:'tax_number')
+        self.tax_number = attributes[:'tax_number']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          name == o.name &&
+          company == o.company &&
+          address1 == o.address1 &&
+          address2 == o.address2 &&
+          city == o.city &&
+          state_code == o.state_code &&
+          state_name == o.state_name &&
+          country_code == o.country_code &&
+          country_name == o.country_name &&
+          zip == o.zip &&
+          phone == o.phone &&
+          email == o.email &&
+          tax_number == o.tax_number
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [name, company, address1, address2, city, state_code, state_name, country_code, country_name, zip, phone, email, tax_number].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Printful.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/printful_client/models/address_info.rb

@@ -0,0 +1,287 @@
+=begin
+#API Documentation | Printful
+
+## About the Printful API  The Printful API is a RESTful API, that uses an HTTP protocol for communication. HTTP GET, POST, PUT and DELETE methods are used to access the API resources.  ## Requests and responses  ### Request endpoint All API requests have to be sent to this URL: ``` https://api.printful.com/ ``` If you are using a proxy, make sure that all requests have host header set to **api.printful.com**.  ### Request parameters Some mandatory parameters (like object identifiers) must be included in the request URL path ``` GET /orders/123 ``` Additional parameters can be passed as GET variables: ``` GET /orders?offset=10&limit=5 ``` For POST and PUT requests, a more complex data structure can be passed as JSON encoded data in the request body: ``` POST /orders  {\"recipient\":{...},\"items\":[...]} ```  ### Response body The response body is always a JSON object that contains a response status code (identical to the HTTP status code) and the result of the action. If the status code is 200, then the action was successful. ``` {    \"code\": 200, //Response status code    \"result\":{       //API method return data    //...    } } ```  Sometimes the response includes paging information to allow to browse larger result sets by adding offset and limit GET parameters to the request URL. ``` {    \"code\": 200, //Response status code    \"result\":[     {        //Item 11     },     {        //Item 12     }    ]    \"paging\": {       \"total\": 12,  //Total items available       \"offset\": 10, //Items skipped from the beginning       \"limit\": 20   //Number of items per page    } } ```  ## Error response If the API call is not successful, then the response code is not in the 2xx range and the `result` attribute contains an error description. ``` {     \"code\": 404,     \"result\": \"Not Found\",     \"error\": {         \"reason\": \"NotFound\",         \"message\": \"Not Found\"     } } ```  In general, response codes in the 4xx range indicate an error that resulted from the provided information (e.g. a required parameter was missing, etc.), and codes in the 5xx range indicate an error with Printful's servers.  ### Timestamps All timestamps from the API are returned as integers in UNIX timestamp format.  ### Rate Limits Printful API has a general rate limit of 120 API calls per minute. Additionally, endpoints that perform resource intensive operations (such as mockup generator) have a lower allowed request limit.  # Authentication  <!-- ReDoc-Inject: <security-definitions> -->
+
+The version of the OpenAPI document: 1.0
+Contact: devsupport@printful.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 7.0.0-SNAPSHOT
+
+=end
+
+require 'date'
+require 'time'
+
+module Printful
+  # Recipient location information
+  class AddressInfo
+    # Address line 1
+    attr_accessor :address1
+
+    # City
+    attr_accessor :city
+
+    # Country code
+    attr_accessor :country_code
+
+    # State code (optional, required for United States, Australia and Canada)
+    attr_accessor :state_code
+
+    # ZIP or postal code (optional, required for some countries to calculate expedited shipping rates)
+    attr_accessor :zip
+
+    # Phone number (optional)
+    attr_accessor :phone
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'address1' => :'address1',
+        :'city' => :'city',
+        :'country_code' => :'country_code',
+        :'state_code' => :'state_code',
+        :'zip' => :'zip',
+        :'phone' => :'phone'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'address1' => :'String',
+        :'city' => :'String',
+        :'country_code' => :'String',
+        :'state_code' => :'String',
+        :'zip' => :'String',
+        :'phone' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Printful::AddressInfo` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Printful::AddressInfo`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'address1')
+        self.address1 = attributes[:'address1']
+      else
+        self.address1 = nil
+      end
+
+      if attributes.key?(:'city')
+        self.city = attributes[:'city']
+      else
+        self.city = nil
+      end
+
+      if attributes.key?(:'country_code')
+        self.country_code = attributes[:'country_code']
+      else
+        self.country_code = nil
+      end
+
+      if attributes.key?(:'state_code')
+        self.state_code = attributes[:'state_code']
+      end
+
+      if attributes.key?(:'zip')
+        self.zip = attributes[:'zip']
+      end
+
+      if attributes.key?(:'phone')
+        self.phone = attributes[:'phone']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if @address1.nil?
+        invalid_properties.push('invalid value for "address1", address1 cannot be nil.')
+      end
+
+      if @city.nil?
+        invalid_properties.push('invalid value for "city", city cannot be nil.')
+      end
+
+      if @country_code.nil?
+        invalid_properties.push('invalid value for "country_code", country_code cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if @address1.nil?
+      return false if @city.nil?
+      return false if @country_code.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          address1 == o.address1 &&
+          city == o.city &&
+          country_code == o.country_code &&
+          state_code == o.state_code &&
+          zip == o.zip &&
+          phone == o.phone
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [address1, city, country_code, state_code, zip, phone].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Printful.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end