poolparty 1.3.15 → 1.4.0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/gmond.conf.erb

@@ -0,0 +1,426 @@
+/* This configuration is as close to 2.5.x default behavior as possible
+   The values closely match ./gmond/metric.h definitions in 2.5.x */
+/* some comments borrowed from http://www-user.tu-chemnitz.de/~aas/wiki/lib/exe/fetch.php?id=projekte%3Aganglia&cache=cache&media=gmond.conf.template */
+globals {
+  daemonize = yes
+  setuid = yes
+  user = <%= @node[:ganglia][:gmond_user] %>
+  debug_level = 0
+  max_udp_msg_len = 1472
+  mute = no
+  deaf = no 
+  allow_extra_data = yes
+  host_dmax = 0 /*secs */
+  cleanup_threshold = 300 /*secs */
+  gexec = no
+  send_metadata_interval = 10 
+}
+
+/*
+ * The cluster attributes specified will be used as part of the <CLUSTER>
+ * tag that will wrap all hosts collected by this instance.
+ */
+cluster {
+  name = "<%= @node[:ganglia][:ganglia_cloud_name] %>"
+  owner = "unspecified"
+  latlong = "unspecified"
+  url = "unspecified"
+}
+
+/* The host section describes attributes of the host, like the location */
+host {
+  location = "unspecified"
+}
+
+/*
+	UDP send channels
+
+	Gmond will use UDP send channel(s) for sending monitoring
+	data it collects from _the local node_ to other nodes.
+
+	There are two different kinds of UDP send channels:
+	- unicast channel:
+	  specifies a single host that is supposed to receive monitoring
+	  data from other client nodes
+
+	- multicast channel:
+	  specifies a multicast domain that will be used to spread monitoring data
+
+	Note:
+	- the type of channel that should be used depends on the kind of monitoring 
+	  architecture you want to implement
+	- make sure to set 'mute = no' in the global configuration section!
+	- multiple UDP send channels can be configured
+	- gmond will send its data through all channels simultaneously
+	
+	See "Monitoringsoftware Ganglia - Installation, Konfiguration und Bewertung",
+	section "Architektur der Monitoringsoftware Ganglia" for further details!
+
+	Unicast UDP send channels:
+	- the target host has to be a node running gmond
+	- the gmond running on the target host has to be configured to
+	  accept data from other gmonds
+*/
+
+/* Feel free to specify as many udp_send_channels as you like.  Gmond
+   used to only support having a single channel */
+udp_send_channel {
+  /* mcast_join = <%= @node[:ganglia][:ganglia_masters_ip] %> */
+  /* host = <%= @node[:ganglia][:ganglia_masters_ip] %> */
+  host = <%= @node[:ganglia][:ganglia_first_node_in_clusters_ip] %>
+  port = 8649
+  ttl = 1
+}
+
+/*
+	UDP receive channels
+
+	Gmond will 'listen' on all UDP receive channels for incoming
+	monitoring data. Incoming data from other gmonds will be added
+	to the cluster state maintained by the local node.
+
+	There are two different kinds of UDP receive channels:
+	- unicast channel:
+	  specifies a single UDP port that will accept incoming data
+
+	- multicast channel:
+	  tells gmond to join a multicast domain and accept incoming
+	  data sent by other members of the same domain
+
+	Note:
+	- the type of channel that should be used depends on the kind of monitoring 
+	  architecture you want to implement
+	- make sure to set 'deaf = no' in the global configuration section!
+	- multiple UDP receive channels can be configured
+	- gmond will accept data on all channels simultaneously
+
+	See "Monitoringsoftware Ganglia - Installation, Konfiguration und Bewertung",
+	section "Architektur der Monitoringsoftware Ganglia" for further details!
+
+    You can specify as many udp_recv_channels as you like. */
+udp_recv_channel {
+  /* mcast_join = <%= @node[:ganglia][:ganglia_this_nodes_private_ip] %> */
+  port = 8649
+  bind = <%= @node[:ganglia][:ganglia_this_nodes_private_ip] %>  
+  /* bind = 0.0.0.0 */
+  family = inet4
+
+  acl {
+    default = "allow"
+  }
+}
+<%# if @node[:ganglia][:ganglia_gmond_is_master] %>
+<%# end %>
+/*
+	TCP accept channels
+
+	Gmond will listen on all TCP accept channels for incoming connections
+	from nodes running gmetad. When a gmetad connects, gmond will transmit
+	_all monitoring data_ it has collected so far (i.e. the state of the
+	_whole cluster_ as far as gmond knows about it).
+
+	Note:
+	- make sure to set 'mute = no' in the global configuration section
+	- multiple TCP accept channels can be configured
+	- gmond will accept requests on all channels simultaneously
+
+   You can specify as many tcp_accept_channels as you like to share
+   an xml description of the state of the cluster */
+tcp_accept_channel {
+  port = 8649
+  bind = <%= @node[:ganglia][:ganglia_this_nodes_private_ip] %>
+  acl {
+    default = "allow"
+  }
+}
+
+/* Each metrics module that is referenced by gmond must be specified and
+   loaded. If the module has been statically linked with gmond, it does
+   not require a load path. However all dynamically loadable modules must
+   include a load path. */
+modules {
+  module {
+    name = "core_metrics"
+  }
+  module {
+    name = "cpu_module"
+    path = "modcpu.so"
+  }
+  module {
+    name = "disk_module"
+    path = "moddisk.so"
+  }
+  module {
+    name = "load_module"
+    path = "modload.so"
+  }
+  module {
+    name = "mem_module"
+    path = "modmem.so"
+  }
+  module {
+    name = "net_module"
+    path = "modnet.so"
+  }
+  module {
+    name = "proc_module"
+    path = "modproc.so"
+  }
+  module {
+    name = "sys_module"
+    path = "modsys.so"
+  }
+}
+
+include ('/etc/ganglia/conf.d/*.conf')
+
+/* The old internal 2.5.x metric array has been replaced by the following
+   collection_group directives.  What follows is the default behavior for
+   collecting and sending metrics that is as close to 2.5.x behavior as
+   possible. */
+
+/* This collection group will cause a heartbeat (or beacon) to be sent every
+   20 seconds.  In the heartbeat is the GMOND_STARTED data which expresses
+   the age of the running gmond. */
+collection_group {
+  collect_once = yes
+  time_threshold = 20
+  metric {
+    name = "heartbeat"
+  }
+}
+
+/* This collection group will send general info about this host every
+   1200 secs.
+   This information doesn't change between reboots and is only collected
+   once. */
+collection_group {
+  collect_once = yes
+  time_threshold = 1200
+  metric {
+    name = "cpu_num"
+    title = "CPU Count"
+  }
+  metric {
+    name = "cpu_speed"
+    title = "CPU Speed"
+  }
+  metric {
+    name = "mem_total"
+    title = "Memory Total"
+  }
+  /* Should this be here? Swap can be added/removed between reboots. */
+  metric {
+    name = "swap_total"
+    title = "Swap Space Total"
+  }
+  metric {
+    name = "boottime"
+    title = "Last Boot Time"
+  }
+  metric {
+    name = "machine_type"
+    title = "Machine Type"
+  }
+  metric {
+    name = "os_name"
+    title = "Operating System"
+  }
+  metric {
+    name = "os_release"
+    title = "Operating System Release"
+  }
+  metric {
+    name = "location"
+    title = "Location"
+  }
+}
+
+/* This collection group will send the status of gexecd for this host
+   every 300 secs.*/
+/* Unlike 2.5.x the default behavior is to report gexecd OFF. */
+collection_group {
+  collect_once = yes
+  time_threshold = 300
+  metric {
+    name = "gexec"
+    title = "Gexec Status"
+  }
+}
+
+/* This collection group will collect the CPU status info every 20 secs.
+   The time threshold is set to 90 seconds.  In honesty, this
+   time_threshold could be set significantly higher to reduce
+   unneccessary  network chatter. */
+collection_group {
+  collect_every = 20
+  time_threshold = 90
+  /* CPU status */
+  metric {
+    name = "cpu_user"
+    value_threshold = "1.0"
+    title = "CPU User"
+  }
+  metric {
+    name = "cpu_system"
+    value_threshold = "1.0"
+    title = "CPU System"
+  }
+  metric {
+    name = "cpu_idle"
+    value_threshold = "5.0"
+    title = "CPU Idle"
+  }
+  metric {
+    name = "cpu_nice"
+    value_threshold = "1.0"
+    title = "CPU Nice"
+  }
+  metric {
+    name = "cpu_aidle"
+    value_threshold = "5.0"
+    title = "CPU aidle"
+  }
+  metric {
+    name = "cpu_wio"
+    value_threshold = "1.0"
+    title = "CPU wio"
+  }
+  /* The next two metrics are optional if you want more detail...
+     ... since they are accounted for in cpu_system.
+  metric {
+    name = "cpu_intr"
+    value_threshold = "1.0"
+    title = "CPU intr"
+  }
+  metric {
+    name = "cpu_sintr"
+    value_threshold = "1.0"
+    title = "CPU sintr"
+  }
+  */
+}
+
+collection_group {
+  collect_every = 20
+  time_threshold = 90
+  /* Load Averages */
+  metric {
+    name = "load_one"
+    value_threshold = "1.0"
+    title = "One Minute Load Average"
+  }
+  metric {
+    name = "load_five"
+    value_threshold = "1.0"
+    title = "Five Minute Load Average"
+  }
+  metric {
+    name = "load_fifteen"
+    value_threshold = "1.0"
+    title = "Fifteen Minute Load Average"
+  }
+}
+
+/* This group collects the number of running and total processes */
+collection_group {
+  collect_every = 80
+  time_threshold = 950
+  metric {
+    name = "proc_run"
+    value_threshold = "1.0"
+    title = "Total Running Processes"
+  }
+  metric {
+    name = "proc_total"
+    value_threshold = "1.0"
+    title = "Total Processes"
+  }
+}
+
+/* This collection group grabs the volatile memory metrics every 40 secs and
+   sends them at least every 180 secs.  This time_threshold can be increased
+   significantly to reduce unneeded network traffic. */
+collection_group {
+  collect_every = 40
+  time_threshold = 180
+  metric {
+    name = "mem_free"
+    value_threshold = "1024.0"
+    title = "Free Memory"
+  }
+  metric {
+    name = "mem_shared"
+    value_threshold = "1024.0"
+    title = "Shared Memory"
+  }
+  metric {
+    name = "mem_buffers"
+    value_threshold = "1024.0"
+    title = "Memory Buffers"
+  }
+  metric {
+    name = "mem_cached"
+    value_threshold = "1024.0"
+    title = "Cached Memory"
+  }
+  metric {
+    name = "swap_free"
+    value_threshold = "1024.0"
+    title = "Free Swap Space"
+  }
+}
+
+collection_group {
+  collect_every = 40
+  time_threshold = 300
+  metric {
+    name = "bytes_out"
+    value_threshold = 4096
+    title = "Bytes Sent"
+  }
+  metric {
+    name = "bytes_in"
+    value_threshold = 4096
+    title = "Bytes Received"
+  }
+  metric {
+    name = "pkts_in"
+    value_threshold = 256
+    title = "Packets Received"
+  }
+  metric {
+    name = "pkts_out"
+    value_threshold = 256
+    title = "Packets Sent"
+  }
+}
+
+/* Different than 2.5.x default since the old config made no sense */
+collection_group {
+  collect_every = 1800
+  time_threshold = 3600
+  metric {
+    name = "disk_total"
+    value_threshold = 1.0
+    title = "Total Disk Space"
+  }
+}
+
+collection_group {
+  collect_every = 40
+  time_threshold = 180
+  metric {
+    name = "disk_free"
+    value_threshold = 1.0
+    title = "Disk Space Available"
+  }
+  metric {
+    name = "part_max_used"
+    value_threshold = 1.0
+    title = "Maximum Disk Space Used"
+  }
+}
+
+
+/* vim: ft=javascript */

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/jaunty.sources.list.erb

@@ -0,0 +1,6 @@
+deb http://archive.ubuntu.com/ubuntu/ jaunty main restricted
+deb http://archive.ubuntu.com/ubuntu/ jaunty universe
+deb http://archive.ubuntu.com/ubuntu/ jaunty multiverse
+deb-src http://archive.ubuntu.com/ubuntu/ jaunty main restricted
+deb-src http://archive.ubuntu.com/ubuntu/ jaunty universe
+deb-src http://archive.ubuntu.com/ubuntu/ jaunty multiverse

data/examples/chef_cloud/chef-repo/cookbooks/ntp/attributes/ntp.rb

@@ -0,0 +1,11 @@
+ntp Mash.new unless attribute?("ntp")
+
+case platform 
+when "ubuntu","debian"
+  ntp[:service] = "ntp"
+when "redhat","centos","fedora"
+  ntp[:service] = "ntpd"
+end unless ntp.has_key?(:service)
+
+ntp[:is_server] = false unless ntp.has_key?(:is_server)
+ntp[:servers] = ["0.us.pool.ntp.org", "1.us.pool.ntp.org"] unless ntp.has_key?(:servers)

data/examples/chef_cloud/chef-repo/cookbooks/ntp/metadata.json

@@ -0,0 +1,97 @@
+{
+  "description": "Installs and configures ntp as a client or server",
+  "replacing": {
+
+  },
+  "recipes": {
+    "ntp": ""
+  },
+  "platforms": {
+    "ubuntu": [
+
+    ],
+    "fedora": [
+
+    ],
+    "centos": [
+
+    ],
+    "redhat": [
+
+    ],
+    "debian": [
+
+    ]
+  },
+  "maintainer": "Opscode, Inc.",
+  "version": "0.7.0",
+  "recommendations": {
+
+  },
+  "name": "ntp",
+  "maintainer_email": "cookbooks@opscode.com",
+  "attributes": {
+    "ntp\/servers": {
+      "default": [
+        "0.us.pool.ntp.org",
+        "1.us.pool.ntp.org"
+      ],
+      "type": "array",
+      "multiple_values": false,
+      "description": "Array of servers we should talk to",
+      "display_name": "NTP Servers",
+      "required": false,
+      "recipes": [
+
+      ]
+    },
+    "ntp\/is_server": {
+      "default": "false",
+      "type": "string",
+      "multiple_values": false,
+      "description": "Set to true if this is an NTP server",
+      "display_name": "NTP Is Server?",
+      "required": false,
+      "recipes": [
+
+      ]
+    },
+    "ntp\/service": {
+      "default": "ntp",
+      "type": "string",
+      "multiple_values": false,
+      "description": "Name of the NTP service",
+      "display_name": "NTP Service",
+      "required": false,
+      "recipes": [
+
+      ]
+    },
+    "ntp": {
+      "type": "hash",
+      "multiple_values": false,
+      "description": "Hash of NTP attributes",
+      "display_name": "NTP",
+      "required": false,
+      "recipes": [
+
+      ]
+    }
+  },
+  "suggestions": {
+
+  },
+  "license": "Apache 2.0",
+  "conflicting": {
+
+  },
+  "dependencies": {
+
+  },
+  "providing": {
+    "ntp": [
+
+    ]
+  },
+  "long_description": ""
+}

data/examples/chef_cloud/chef-repo/cookbooks/ntp/metadata.rb

@@ -0,0 +1,31 @@
+maintainer        "Opscode, Inc."
+maintainer_email  "cookbooks@opscode.com"
+license           "Apache 2.0"
+description       "Installs and configures ntp as a client or server"
+version           "0.7"
+
+%w{ ubuntu debian redhat centos fedora }.each do |os|
+  supports os
+end
+
+attribute "ntp",
+  :display_name => "NTP",
+  :description => "Hash of NTP attributes",
+  :type => "hash"
+
+attribute "ntp/service",
+  :display_name => "NTP Service",
+  :description => "Name of the NTP service",
+  :default => "ntp"
+
+attribute "ntp/is_server",
+  :display_name => "NTP Is Server?",
+  :description => "Set to true if this is an NTP server",
+  :default => "false"
+
+attribute "ntp/servers",
+  :display_name => "NTP Servers",
+  :description => "Array of servers we should talk to",
+  :type => "array",
+  :default => ["0.us.pool.ntp.org", "1.us.pool.ntp.org"]
+

data/examples/chef_cloud/chef-repo/cookbooks/ntp/recipes/default.rb

@@ -0,0 +1,41 @@
+#
+# Cookbook Name:: ntp
+# Recipe:: default
+# Author:: Joshua Timberman (<joshua@opscode.com>)
+#
+# Copyright 2009, Opscode, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+case node[:platform] 
+when "ubuntu","debian"
+  package "ntpdate" do
+    action :install
+  end
+end
+
+package "ntp" do
+  action :install
+end
+
+service node[:ntp][:service] do
+  action :start
+end
+
+template "/etc/ntp.conf" do
+  source "ntp.conf.erb"
+  owner "root"
+  group "root"
+  mode 0644
+  notifies :restart, resources(:service => node[:ntp][:service])
+end

data/examples/chef_cloud/chef-repo/cookbooks/ntp/templates/default/ntp.conf.erb

@@ -0,0 +1,21 @@
+driftfile /var/lib/ntp/ntp.drift
+statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+<% if @node[:ntp][:is_server] -%>
+server 0.us.pool.ntp.org
+server 1.us.pool.ntp.org
+server 2.us.pool.ntp.org
+server 3.us.pool.ntp.org
+<% else -%>
+<% @node[:ntp][:servers].each do |ntpserver| -%>
+  server <%= ntpserver %>
+<% end -%>
+<% end -%>
+restrict default kod notrap nomodify nopeer noquery
+
+restrict 127.0.0.1 nomodify

data/examples/chef_cloud/chef-repo/cookbooks/rsyslog/README.rdoc

@@ -0,0 +1,55 @@
+= DESCRIPTION:
+
+Installs rsyslog to replace sysklogd for client and/or server use. By default, server will be set up to log to files.
+
+= REQUIREMENTS:
+
+== Platform:
+
+Tested on Ubuntu 8.10.
+
+== Cookbooks:
+
+= ATTRIBUTES: 
+
+* rsyslog[:log_dir] - specify the directory to store logs (applicable to server only)
+* rsyslog[:server] - specify the remote rsyslog server.
+* rsyslog[:protocol] - specify whether to use udp or tcp for remote log transmission. tcp is default.
+
+= USAGE:
+
+To replace the sysklogd syslog service with rsyslog:
+
+  include_recipe "rsyslog"
+  
+To set up a client with a remote [r]syslog server:
+
+  include_recipe "rsyslog::client"
+  
+By default, this cookbook will use TCP so the server should be configured for TCP. This can be done easily with the server recipe:
+
+  include_recipe "rsyslog::server"
+
+To switch to UDP, change the rsyslog[:protocol] attribute. Note this needs to be done on each client as well.
+
+Also, the server configuration will set up log_dir for each client, by date. Structure:
+
+  <%= @log_dir %>/YEAR/MONTH/DAY/HOSTNAME/"logfile"
+
+= LICENSE and AUTHOR:
+      
+Author:: Joshua Timberman (<joshua@opscode.com>)
+
+Copyright:: 2009, Opscode, Inc
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.