poolparty 1.3.15 → 1.4.0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/recipes/monitor_watson.rb

@@ -0,0 +1,14 @@
+template "/etc/ganglia/bin/monitors/watson_channels.sh" do
+  source "bin/monitors/watson_channels.sh.erb"
+  mode "0755"
+end
+
+cron "watson-channels" do
+  minute "*/1"
+  hour "*"
+  day "*"
+  month "*"
+  weekday "*"
+  command "bash -c /etc/ganglia/bin/monitors/watson_channels.sh"
+end
+

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/recipes/web.rb

@@ -0,0 +1,17 @@
+# Cookbook Name:: ganglia
+# Recipe:: web
+
+# hmm, maybe unify with below
+execute "create ganglia web interface" do
+  command "cp -r  /opt/local/src/ganglia-3.1.2/web #{node[:ganglia][:gmond_web_root]}"
+  action :run
+  creates node[:ganglia][:gmond_web_root]
+end
+
+# setenforce 0
+execute "selinux: allow httpd can network for ganglia web interface" do
+  command "setsebool -P httpd_can_network_connect 1"
+  action :run
+  only_if "/usr/sbin/getenforce | grep Enforcing"
+  not_if "getsebool httpd_can_network_connect | grep on"
+end

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/bin/gmetad.erb

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/gmetad
+NAME=gmetad
+DESC="Ganglia Monitor Meta-Daemon"
+
+test -x $DAEMON || exit 0
+set -e
+
+case "$1" in
+  start)
+        echo -n "Starting $DESC: "
+        start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
+                --exec $DAEMON
+        echo "$NAME."
+        ;;
+  stop)
+        echo -n "Stopping $DESC: "
+        start-stop-daemon --stop  --quiet --oknodo \
+                --exec $DAEMON  2>&1 > /dev/null
+        echo "$NAME."
+        ;;
+  reload)
+  ;;
+  restart|force-reload)
+        $0 stop
+        $0 start
+        ;;
+  *)
+        N=/etc/init.d/$NAME
+        # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
+        echo "Usage: $N {start|stop|restart|force-reload}" >&2
+        exit 1
+        ;;
+esac
+
+exit 0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/bin/gmond.erb

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/gmond
+NAME=gmond
+DESC="Ganglia Monitor Daemon"
+
+test -x $DAEMON || exit 0
+set -e
+
+case "$1" in
+  start)
+        echo -n "Starting $DESC: "
+        start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
+                --exec $DAEMON
+        echo "$NAME."
+        ;;
+  stop)
+        echo -n "Stopping $DESC: "
+        start-stop-daemon --stop  --quiet --oknodo \
+                --exec $DAEMON  2>&1 > /dev/null
+        echo "$NAME."
+        ;;
+  reload)
+  ;;
+  restart|force-reload)
+        $0 stop
+        $0 start
+        ;;
+  *)
+        N=/etc/init.d/$NAME
+        # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
+        echo "Usage: $N {start|stop|restart|force-reload}" >&2
+        exit 1
+        ;;
+esac
+
+exit 0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/bin/monitors/sshd_ganglia.sh.erb

@@ -0,0 +1,13 @@
+#!/bin/bash
+# Nate Murray <nmurray@attinterative.com>
+# Date 2009-07-13
+# 
+# Record number of invalid users or failed passwords in sshd
+
+# Also check if this is the right location of gmetric
+GMETRIC=/usr/bin/gmetric
+AUTH_LOG=/var/log/auth
+
+COUNT=$(cat $AUTH_LOG | grep -iE "(Invalid user|Failed password)" | grep "`date '+%b %e'`" | wc -l)
+$GMETRIC --name "failed-or-invalid-login-attempts" --value $COUNT --type uint8 --units ''
+exit 0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/bin/monitors/watson_channels.sh.erb

@@ -0,0 +1,13 @@
+#!/bin/bash
+# 2009-10-01
+
+# Also check if this is the right location of gmetric
+GMETRIC=/usr/bin/gmetric
+AUTH_LOG=/var/log/auth
+
+dEFAULT_COUNT=0
+COUNT=$(echo "status" | nc localhost 8081 | grep free |awk '{print $2}')
+[ "x" = "x$COUNT" ] && COUNT=${DEFAULT_COUNT}
+
+$GMETRIC --name "watson-free-channels" --value $COUNT --type uint8 --units ''
+exit 0

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/ganglia-web-conf.php.erb

@@ -0,0 +1,191 @@
+<?php
+# $Id: conf.php.in 1831 2008-09-26 12:18:54Z carenas $
+#
+# Gmetad-webfrontend version. Used to check for updates.
+#
+include_once "./version.php";
+
+#
+# The name of the directory in "./templates" which contains the
+# templates that you want to use. Templates are like a skin for the
+# site that can alter its look and feel.
+#
+$template_name = "default";
+
+#
+# If you installed gmetad in a directory other than the default
+# make sure you change it here.
+#
+
+# Where gmetad stores the rrd archives.
+$gmetad_root = "/var/lib/ganglia";
+$rrds = "$gmetad_root/rrds";
+
+# Leave this alone if rrdtool is installed in $gmetad_root,
+# otherwise, change it if it is installed elsewhere (like /usr/bin)
+define("RRDTOOL", "/usr/bin/rrdtool");
+
+# Location for modular-graph files.
+$graphdir='./graph.d';
+
+#
+# If you want to grab data from a different ganglia source specify it here.
+# Although, it would be strange to alter the IP since the Round-Robin
+# databases need to be local to be read. 
+#
+$ganglia_ip = "127.0.0.1";
+$ganglia_port = 8652;
+
+#
+# The maximum number of dynamic graphs to display.  If you set this
+# to 0 (the default) all graphs will be shown.  This option is
+# helpful if you are viewing the web pages from a browser with a 
+# small pipe.
+#
+$max_graphs = 0;
+
+#
+# In the Cluster View this sets the default number of columns used to
+# display the host grid below the summary graphs.
+#
+$hostcols = 4;
+
+#
+# In the Host View this sets the default number of columns used to
+# display the metric grid below the summary graphs.
+#
+$metriccols = 2;
+
+#
+# Turn on and off the Grid Snapshot. Now that we have a
+# hierarchical snapshot (per-cluster instead of per-node) on
+# the meta page this makes more sense. Most people will want this
+# on.
+#
+$show_meta_snapshot = "yes";
+
+# 
+# The default refresh frequency on pages.
+#
+$default_refresh = 300;
+
+#
+# Colors for the CPU report graph
+#
+$cpu_user_color = "3333bb";
+$cpu_nice_color = "ffea00";
+$cpu_system_color = "dd0000";
+$cpu_wio_color = "ff8a60";
+$cpu_idle_color = "e2e2f2";
+
+#
+# Colors for the MEMORY report graph
+#
+$mem_used_color = "5555cc";
+$mem_shared_color = "0000aa";
+$mem_cached_color = "33cc33";
+$mem_buffered_color = "99ff33";
+$mem_free_color = "00ff00";
+$mem_swapped_color = "9900CC";
+
+#
+# Colors for the LOAD report graph
+#
+$load_one_color = "CCCCCC";
+$proc_run_color = "0000FF";
+$cpu_num_color  = "FF0000";
+$num_nodes_color = "00FF00";
+
+# Other colors
+$jobstart_color = "ff3300";
+
+#
+# Colors for the load ranks.
+#
+$load_colors = array(
+   "100+" => "ff634f",
+   "75-100" =>"ffa15e",
+   "50-75" => "ffde5e",
+   "25-50" => "caff98",
+   "0-25" => "e2ecff",
+   "down" => "515151"
+);
+
+#
+# Load scaling
+#
+$load_scale = 1.0;
+
+#
+# Default color for single metric graphs
+#
+$default_metric_color = "555555";
+
+#
+# Default metric 
+#
+$default_metric = "load_one";
+
+#
+# remove the domainname from the FQDN hostnames in graphs
+# (to help with long hostnames in small charts)
+#
+$strip_domainname = false;
+
+#
+# Optional summary graphs
+#
+$optional_graphs = array('packet');
+
+# 
+# Time ranges
+# Each value is the # of seconds in that range.
+#
+$time_ranges = array(
+   'hour'=>3600,
+   'day'=>86400,
+   'week'=>604800,
+   'month'=>2419200,
+   'year'=>31449600
+);
+
+# this key must exist in $time_ranges
+$default_time_range = 'hour';
+
+#
+# Graph sizes
+#
+$graph_sizes = array(
+   'small'=>array(
+     'height'=>40,
+     'width'=>130,
+     'fudge_0'=>0,
+     'fudge_1'=>0,
+     'fudge_2'=>0
+   ),
+   'medium'=>array(
+     'height'=>75,
+     'width'=>300,
+     'fudge_0'=>0,
+     'fudge_1'=>14,
+     'fudge_2'=>28
+   ),
+   'large'=>array(
+     'height'=>600,
+     'width'=>800,
+     'fudge_0'=>0,
+     'fudge_1'=>0,
+     'fudge_2'=>0
+   ),
+   # this was the default value when no other size was provided.
+   'default'=>array(
+     'height'=>100,
+     'width'=>400,
+     'fudge_0'=>0,
+     'fudge_1'=>0,
+     'fudge_2'=>0
+   )
+);
+$default_graph_size = 'default';
+$graph_sizes_keys = array_keys( $graph_sizes );
+?>

data/examples/chef_cloud/chef-repo/cookbooks/ganglia/templates/default/gmetad.conf.erb

@@ -0,0 +1,117 @@
+# This is an example of a Ganglia Meta Daemon configuration file
+#                http://ganglia.sourceforge.net/
+#
+# $Id: gmetad.conf.in 1639 2008-08-09 23:30:32Z carenas $
+#
+#-------------------------------------------------------------------------------
+# Setting the debug_level to 1 will keep daemon in the forground and
+# show only error messages. Setting this value higher than 1 will make 
+# gmetad output debugging information and stay in the foreground.
+# default: 0
+# debug_level 10
+#
+#-------------------------------------------------------------------------------
+# What to monitor. The most important section of this file. 
+#
+# The data_source tag specifies either a cluster or a grid to
+# monitor. If we detect the source is a cluster, we will maintain a complete
+# set of RRD databases for it, which can be used to create historical 
+# graphs of the metrics. If the source is a grid (it comes from another gmetad),
+# we will only maintain summary RRDs for it.
+#
+# Format: 
+# data_source "my cluster" [polling interval] address1:port addreses2:port ...
+# 
+# The keyword 'data_source' must immediately be followed by a unique
+# string which identifies the source, then an optional polling interval in 
+# seconds. The source will be polled at this interval on average. 
+# If the polling interval is omitted, 15sec is asssumed. 
+#
+# A list of machines which service the data source follows, in the 
+# format ip:port, or name:port. If a port is not specified then 8649
+# (the default gmond port) is assumed.
+# default: There is no default value
+#
+# data_source "my cluster" 10 localhost  my.machine.edu:8649  1.2.3.5:8655
+# data_source "my grid" 50 1.3.4.7:8655 grid.org:8651 grid-backup.org:8651
+# data_source "another source" 1.3.4.7:8655  1.3.4.8
+# data_source "my cluster" localhost
+#
+<%= @node[:ganglia][:ganglia_gmetad_data_sources] %>
+#
+#
+# Round-Robin Archives
+# You can specify custom Round-Robin archives here (defaults are listed below)
+#
+# RRAs "RRA:AVERAGE:0.5:1:244" "RRA:AVERAGE:0.5:24:244" "RRA:AVERAGE:0.5:168:244" "RRA:AVERAGE:0.5:672:244" \
+#      "RRA:AVERAGE:0.5:5760:374"
+#
+
+#
+#-------------------------------------------------------------------------------
+# Scalability mode. If on, we summarize over downstream grids, and respect
+# authority tags. If off, we take on 2.5.0-era behavior: we do not wrap our output
+# in <GRID></GRID> tags, we ignore all <GRID> tags we see, and always assume
+# we are the "authority" on data source feeds. This approach does not scale to
+# large groups of clusters, but is provided for backwards compatibility.
+# default: on
+# scalable off
+#
+#-------------------------------------------------------------------------------
+# The name of this Grid. All the data sources above will be wrapped in a GRID
+# tag with this name.
+# default: unspecified
+gridname "<%= @node[:ganglia][:ganglia_pool_name] %>"
+#
+#-------------------------------------------------------------------------------
+# The authority URL for this grid. Used by other gmetads to locate graphs
+# for our data sources. Generally points to a ganglia/
+# website on this machine.
+# default: "http://hostname/ganglia/",
+#   where hostname is the name of this machine, as defined by gethostname().
+# authority "http://mycluster.org/newprefix/"
+#
+#-------------------------------------------------------------------------------
+# List of machines this gmetad will share XML with. Localhost
+# is always trusted. 
+# default: There is no default value
+# trusted_hosts 127.0.0.1 169.229.50.165 my.gmetad.org
+#
+#-------------------------------------------------------------------------------
+# If you want any host which connects to the gmetad XML to receive
+# data, then set this value to "on"
+# default: off
+# all_trusted on
+#
+#-------------------------------------------------------------------------------
+# If you don't want gmetad to setuid then set this to off
+# default: on
+# setuid off
+#
+#-------------------------------------------------------------------------------
+# User gmetad will setuid to (defaults to "nobody")
+# default: "nobody"
+setuid_username <%= @node[:ganglia][:gmetad_user] %>
+
+
+#
+#-------------------------------------------------------------------------------
+# The port gmetad will answer requests for XML
+# default: 8651
+# xml_port 8651
+#
+#-------------------------------------------------------------------------------
+# The port gmetad will answer queries for XML. This facility allows
+# simple subtree and summation views of the XML tree.
+# default: 8652
+interactive_port 8652
+#
+#-------------------------------------------------------------------------------
+# The number of threads answering XML requests
+# default: 4
+# server_threads 10
+#
+#-------------------------------------------------------------------------------
+# Where gmetad stores its round-robin databases
+# default: "/var/lib/ganglia/rrds"
+# rrd_rootdir "/some/other/place"